Made arch/z80 handling chip-specific

git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@686 42af7a65-404d-4744-a932-0658087f49c3

11 files changed, 306 insertions, 74 deletions

diff --git a/nuttx/arch/z80/src/z8/Make.defs b/nuttx/arch/z80/src/z8/Make.defs
index 9bff5da61..328f785bc 100644
--- a/nuttx/arch/z80/src/z8/Make.defs
+++ b/nuttx/arch/z80/src/z8/Make.defs
@@ -40,9 +40,9 @@ CMN_CSRCS	= up_initialize.c up_allocateheap.c up_createstack.c \
 		  up_releasestack.c up_interruptcontext.c up_blocktask.c \
 		  up_unblocktask.c up_exit.c up_releasepending.c \
 		  up_reprioritizertr.c up_idle.c up_assert.c up_doirq.c \
-		  up_mdelay.c up_udelay.c up_schedulesigaction.c \
-		  up_sigdeliver.c up_usestack.c
+		  up_mdelay.c up_udelay.c up_usestack.c
 
 CHIP_SSRCS	= z8_vector.S z8_saveusercontext.S z8_restorecontext.S
-CHIP_CSRCS	= z8_initialstate.c z8_copystate.c #z8_irq.c z8_registerdump.c
+CHIP_CSRCS	= z8_initialstate.c z8_copystate.c z8_irq.c \
+		  z8_schedulesigaction.c z8_sigdeliver.c z8_registerdump.c
 
diff --git a/nuttx/arch/z80/src/z8/chip.h b/nuttx/arch/z80/src/z8/chip.h
index 7a0f3355a..99b058404 100644
--- a/nuttx/arch/z80/src/z8/chip.h
+++ b/nuttx/arch/z80/src/z8/chip.h
@@ -1,5 +1,5 @@
 /************************************************************************************
- * arch/z80/src/z80/chip.h
+ * arch/z80/src/z8/chip.h
  * arch/z80/src/chip/chip.h
  *
  *   Copyright (C) 2008 Gregory Nutt. All rights reserved.
diff --git a/nuttx/arch/z80/src/z8/switch.h b/nuttx/arch/z80/src/z8/switch.h
index d0ab4db13..ff921858e 100644
--- a/nuttx/arch/z80/src/z8/switch.h
+++ b/nuttx/arch/z80/src/z8/switch.h
@@ -74,17 +74,13 @@
 
 #define IRQ_STATE()              (current_regs)
 
-/* Copy a register state save structure to another location */
-
-#define COPYSTATE(r1,r2)         z8_copystate(r1,r2)
-
 /* Save the current IRQ context in the specified TCB */
 
-#define SAVE_IRQCONTEXT(tcb)     COPYSTATE((tcb)->xcp.regs, current_regs)
+#define SAVE_IRQCONTEXT(tcb)     z8_copystate((tcb)->xcp.regs, current_regs)
 
 /* Set the current IRQ context to the state specified in the TCB */
 
-#define SET_IRQCONTEXT(tcb)      COPYSTATE(current_regs, (tcb)->xcp.regs)
+#define SET_IRQCONTEXT(tcb)      z8_copystate(current_regs, (tcb)->xcp.regs)
 
 /* Save the user context in the specified TCB.  User context saves can be simpler
  * because only those registers normally saved in a C called need be stored.
@@ -98,18 +94,6 @@
 
 #define RESTORE_USERCONTEXT(tcb) z8_restorecontext((tcb)->xcp.regs)
 
-/* Verify that we have a signal handler */
-
-#define SIGNAL_DELIVERING(tcb)   (tcb->xcp.sigdeliver != NULL)
-
-/* Setup the signal handler trampoline */
-
-#define SIGNAL_SETUP(tcb, sigdeliver, regs)  z8_sigsetup(tcb, sigdeliver, regs)
-
-/* Return from a signal handler using the provided register context */
-
-#define SIGNAL_RETURN(regs)      z8_restorecontext(regs)
-
 /* Dump the current machine registers */
 
 #define _REGISTER_DUMP()         z8_registerdump()
diff --git a/nuttx/arch/z80/src/z8/z8_copystate.c b/nuttx/arch/z80/src/z8/z8_copystate.c
index d4d4601a8..881f0a4a5 100644
--- a/nuttx/arch/z80/src/z8/z8_copystate.c
+++ b/nuttx/arch/z80/src/z8/z8_copystate.c
@@ -63,7 +63,7 @@
  ****************************************************************************/
 
 /****************************************************************************
- * Name: z80_copystate
+ * Name: z8_copystate
  ****************************************************************************/
 
 /* Maybe a little faster than most memcpy's */
diff --git a/nuttx/arch/z80/src/z8/z8_registerdump.c b/nuttx/arch/z80/src/z8/z8_registerdump.c
index 8e789b88f..0a77659a4 100644
--- a/nuttx/arch/z80/src/z8/z8_registerdump.c
+++ b/nuttx/arch/z80/src/z8/z8_registerdump.c
@@ -71,7 +71,7 @@
  ****************************************************************************/
 
 /****************************************************************************
- * Name: z80_registerdump
+ * Name: z8_registerdump
  ****************************************************************************/
 
 #ifdef CONFIG_ARCH_STACKDUMP
diff --git a/nuttx/arch/z80/src/z8/z8_schedulesigaction.c b/nuttx/arch/z80/src/z8/z8_schedulesigaction.c
new file mode 100644
index 000000000..ad02f0137
--- /dev/null
+++ b/nuttx/arch/z80/src/z8/z8_schedulesigaction.c
@@ -0,0 +1,192 @@
+/****************************************************************************
+ * arch/z80/src/z8/z8_schedulesigaction.c
+ *
+ *   Copyright (C) 2008 Gregory Nutt. All rights reserved.
+ *   Author: Gregory Nutt <spudmonkey@racsa.co.cr>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name NuttX nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ****************************************************************************/
+
+/****************************************************************************
+ * Included Files
+ ****************************************************************************/
+
+#include <nuttx/config.h>
+
+#include <sys/types.h>
+#include <sched.h>
+#include <debug.h>
+
+#include <nuttx/arch.h>
+#include <arch/irq.h>
+
+#include "chip/switch.h"
+#include "os_internal.h"
+#include "up_internal.h"
+
+#ifndef CONFIG_DISABLE_SIGNALS
+
+/****************************************************************************
+ * Private Definitions
+ ****************************************************************************/
+
+/****************************************************************************
+ * Private Data
+ ****************************************************************************/
+
+/****************************************************************************
+ * Private Functions
+ ****************************************************************************/
+
+/****************************************************************************
+ * Name: z8_sigsetup
+ ****************************************************************************/
+
+static void z8_sigsetup(FAR _TCB *tcb, sig_deliver_t sigdeliver, FAR chipreg_t *regs)
+{
+  /* Save the return address and interrupt state. These will be restored by
+   * the signal trampoline after the signals have been delivered.
+   */
+
+  tcb->xcp.sigdeliver    = sigdeliver;
+  tcb->xcp.saved_pc      = regs[XCPT_PC];
+  tcb->xcp.saved_i       = regs[XCPT_I];
+
+  /* Then set up to vector to the trampoline with interrupts disabled */
+
+  regs[XCPT_PC]  = (chipreg_t)up_sigdeliver;
+  regs[XCPT_I]   = 0;
+}
+
+/****************************************************************************
+ * Public Functions
+ ****************************************************************************/
+
+/****************************************************************************
+ * Name: up_schedule_sigaction
+ *
+ * Description:
+ *   This function is called by the OS when one or more
+ *   signal handling actions have been queued for execution.
+ *   The architecture specific code must configure things so
+ *   that the 'igdeliver' callback is executed on the thread
+ *   specified by 'tcb' as soon as possible.
+ *
+ *   This function may be called from interrupt handling logic.
+ *
+ *   This operation should not cause the task to be unblocked
+ *   nor should it cause any immediate execution of sigdeliver.
+ *   Typically, a few cases need to be considered:
+ *
+ *   (1) This function may be called from an interrupt handler
+ *       During interrupt processing, all xcptcontext structures
+ *       should be valid for all tasks.  That structure should
+ *       be modified to invoke sigdeliver() either on return
+ *       from (this) interrupt or on some subsequent context
+ *       switch to the recipient task.
+ *   (2) If not in an interrupt handler and the tcb is NOT
+ *       the currently executing task, then again just modify
+ *       the saved xcptcontext structure for the recipient
+ *       task so it will invoke sigdeliver when that task is
+ *       later resumed.
+ *   (3) If not in an interrupt handler and the tcb IS the
+ *       currently executing task -- just call the signal
+ *       handler now.
+ *
+ ****************************************************************************/
+
+void up_schedule_sigaction(FAR _TCB *tcb, sig_deliver_t sigdeliver)
+{
+  dbg("tcb=0x%p sigdeliver=0x%04x\n", tcb, (uint16)sigdeliver);
+
+  /* Refuse to handle nested signal actions */
+
+  if (tcb->xcp.sigdeliver == NULL)
+    {
+      irqstate_t flags;
+
+      /* Make sure that interrupts are disabled */
+
+      flags = irqsave();
+
+      /* First, handle some special cases when the signal is being delivered
+       * to the currently executing task.
+       */
+
+      if (tcb == (FAR _TCB*)g_readytorun.head)
+        {
+          /* CASE 1:  We are not in an interrupt handler and a task is
+           * signalling itself for some reason.
+           */
+
+          if (!IN_INTERRUPT())
+            {
+              /* In this case just deliver the signal now. */
+
+              sigdeliver(tcb);
+            }
+
+          /* CASE 2:  We are in an interrupt handler AND the interrupted task
+           * is the same as the one that must receive the signal, then we
+           * will have to modify the return state as well as the state in
+           * the TCB.
+           */
+
+          else
+            {
+              /* Set up to vector to the trampoline with interrupts disabled. */
+
+              z8_sigsetup(tcb, sigdeliver, IRQ_STATE());
+
+              /* And make sure that the saved context in the TCB
+               * is the same as the interrupt return context.
+               */
+
+              SAVE_IRQCONTEXT(tcb);
+            }
+        }
+
+      /* Otherwise, we are (1) signaling a task is not running from an interrupt
+       * handler or (2) we are not in an interrupt handler and the running task
+       * is signalling some non-running task.
+       */
+
+      else
+        {
+          /* Set up to vector to the trampoline with interrupts disabled. */
+
+          z8_sigsetup(tcb, sigdeliver, tcb->xcp.regs);
+        }
+
+      irqrestore(flags);
+    }
+}
+
+#endif /* CONFIG_DISABLE_SIGNALS */
+
diff --git a/nuttx/arch/z80/src/z80/z80_sigsetup.c b/nuttx/arch/z80/src/z8/z8_sigdeliver.c
index 504f3ce19..857db51e5 100644
--- a/nuttx/arch/z80/src/z80/z80_sigsetup.c
+++ b/nuttx/arch/z80/src/z8/z8_sigdeliver.c
@@ -1,5 +1,5 @@
 /****************************************************************************
- * arch/z80/src/z80/z80_sigsetup.c
+ * arch/z80/src/z8/z8_sigdeliver.c
  *
  *   Copyright (C) 2008 Gregory Nutt. All rights reserved.
  *   Author: Gregory Nutt <spudmonkey@racsa.co.cr>
@@ -40,12 +40,18 @@
 #include <nuttx/config.h>
 
 #include <sys/types.h>
-#include <arch/irq.h>
+#include <sched.h>
+#include <debug.h>
+
+#include <nuttx/irq.h>
+#include <nuttx/arch.h>
 
 #include "chip/switch.h"
 #include "os_internal.h"
 #include "up_internal.h"
 
+#ifndef CONFIG_DISABLE_SIGNALS
+
 /****************************************************************************
  * Definitions
  ****************************************************************************/
@@ -63,25 +69,73 @@
  ****************************************************************************/
 
 /****************************************************************************
- * Name: z80_copystate
+ * Name: up_sigdeliver
+ *
+ * Description:
+ *   This is the a signal handling trampoline.  When a
+ *   signal action was posted.  The task context was mucked
+ *   with and forced to branch to this location with interrupts
+ *   disabled.
+ *
  ****************************************************************************/
 
-void z80_sigsetup(FAR _TCB *tcb, sig_deliver_t sigdeliver, FAR chipreg_t *regs)
+void up_sigdeliver(void)
 {
-  /* Save the return address and interrupt state. These will be restored by
-   * the signal trampoline after the signals have been delivered (via
-   * SIGNAL_RETURN).
+#ifndef CONFIG_DISABLE_SIGNALS
+  FAR _TCB  *rtcb = (_TCB*)g_readytorun.head;
+  chipret_t regs[XCPTCONTEXT_REGS];
+  sig_deliver_t sigdeliver;
+
+  /* Save the errno.  This must be preserved throughout the signal handling
+   * so that the the user code final gets the correct errno value (probably
+   * EINTR).
    */
 
-  tcb->xcp.sigdeliver    = sigdeliver;
-  tcb->xcp.saved_pc      = regs[XCPT_PC];
-  tcb->xcp.saved_i       = regs[XCPT_I];
+  int saved_errno = rtcb->pterrno;
 
-  /* Then set up to vector to the trampoline with interrupts disabled */
+  up_ledon(LED_SIGNAL);
 
-  regs[XCPT_PC]  = (chipreg_t)up_sigdeliver;
-  regs[XCPT_I]   = 0;
-}
+  dbg("rtcb=%p sigdeliver=%p sigpendactionq.head=%p\n",
+       rtcb, rtcb->xcp.sigdeliver, rtcb->sigpendactionq.head);
+  ASSERT(rtcb->xcp.sigdeliver != NULL);
+
+  /* Save the real return state on the stack. */
+
+  z8_copystate(regs, rtcb->xcp.regs);
+  regs[XCPT_PC] = rtcb->xcp.saved_pc;
+  regs[XCPT_I]  = rtcb->xcp.saved_i;
+
+  /* Get a local copy of the sigdeliver function pointer.  We do this so
+   * that we can nullify the sigdeliver function point in the TCB and accept
+   * more signal deliveries while processing the current pending signals.
+   */
+
+  sigdeliver           = rtcb->xcp.sigdeliver;
+  rtcb->xcp.sigdeliver = NULL;
 
+  /* Then restore the task interrupt state. */
 
+  irqrestore(regs[XCPT_I]);
+
+  /* Deliver the signals */
+
+  sigdeliver(rtcb);
+
+  /* Output any debug messaged BEFORE restoring errno (because they may alter
+   * errno), then restore the original errno that is needed by the user logic
+   * (it is probably EINTR).
+   */
+
+  dbg("Resuming\n");
+  rtcb->pterrno = saved_errno;
+
+  /* Then restore the correct state for this thread of
+   * execution.
+   */
+
+  up_ledoff(LED_SIGNAL);
+  z8_restoreusercontext(regs);
+#endif
+}
 
+#endif /* CONFIG_DISABLE_SIGNALS */
diff --git a/nuttx/arch/z80/src/z80/Make.defs b/nuttx/arch/z80/src/z80/Make.defs
index 18c6bca72..fb1be00e2 100644
--- a/nuttx/arch/z80/src/z80/Make.defs
+++ b/nuttx/arch/z80/src/z80/Make.defs
@@ -40,9 +40,10 @@ CMN_CSRCS	= up_initialize.c up_allocateheap.c up_createstack.c \
 		  up_releasestack.c up_interruptcontext.c up_blocktask.c  \
 		  up_unblocktask.c up_exit.c up_releasepending.c \
 		  up_reprioritizertr.c up_idle.c up_assert.c up_doirq.c \
-		  up_mdelay.c up_udelay.c up_schedulesigaction.c \
-		  up_sigdeliver.c up_usestack.c
+		  up_mdelay.c up_udelay.c up_usestack.c
 
 CHIP_ASRCS	= z80_saveusercontext.asm z80_restoreusercontext.asm
-CHIP_CSRCS	= z80_initialstate.c z80_irq.c z80_copystate.c z80_registerdump.c
+CHIP_CSRCS	= z80_initialstate.c z80_irq.c z80_copystate.c \
+		  z80_schedulesigaction.c z80_sigdeliver.c \
+		  z80_registerdump.c
 
diff --git a/nuttx/arch/z80/src/z80/switch.h b/nuttx/arch/z80/src/z80/switch.h
index c0c689dbf..2ba18615b 100644
--- a/nuttx/arch/z80/src/z80/switch.h
+++ b/nuttx/arch/z80/src/z80/switch.h
@@ -74,17 +74,13 @@
 
 #define IRQ_STATE()              (current_regs)
 
-/* Copy a register state save structure to another location */
-
-#define COPYSTATE(r1,r2)         z80_copystate(r1,r2)
-
 /* Save the current IRQ context in the specified TCB */
 
-#define SAVE_IRQCONTEXT(tcb)     COPYSTATE((tcb)->xcp.regs, current_regs)
+#define SAVE_IRQCONTEXT(tcb)     z80_copystate((tcb)->xcp.regs, current_regs)
 
 /* Set the current IRQ context to the state specified in the TCB */
 
-#define SET_IRQCONTEXT(tcb)      COPYSTATE(current_regs, (tcb)->xcp.regs)
+#define SET_IRQCONTEXT(tcb)      z80_copystate(current_regs, (tcb)->xcp.regs)
 
 /* Save the user context in the specified TCB.  User context saves can be simpler
  * because only those registers normally saved in a C called need be stored.
@@ -98,18 +94,6 @@
 
 #define RESTORE_USERCONTEXT(tcb) z80_restoreusercontext((tcb)->xcp.regs)
 
-/* Verify that we have a signal handler */
-
-#define SIGNAL_DELIVERING(tcb)   (tcb->xcp.sigdeliver != NULL)
-
-/* Setup the signal handler trampoline */
-
-#define SIGNAL_SETUP(tcb, sigdeliver, regs)  z80_sigsetup(tcb, sigdeliver, regs)
-
-/* Return from a signal handler using the provided register context */
-
-#define SIGNAL_RETURN(regs)      z80_restoreusercontext(regs)
-
 /* Dump the current machine registers */
 
 #define _REGISTER_DUMP()         z80_registerdump()
diff --git a/nuttx/arch/z80/src/common/up_schedulesigaction.c b/nuttx/arch/z80/src/z80/z80_schedulesigaction.c
index 2c4d4294d..6844b44e1 100644
--- a/nuttx/arch/z80/src/common/up_schedulesigaction.c
+++ b/nuttx/arch/z80/src/z80/z80_schedulesigaction.c
@@ -1,5 +1,5 @@
 /****************************************************************************
- * arch/z80/src/common/up_schedulesigaction.c
+ * arch/z80/src/z80/z80_schedulesigaction.c
  *
  *   Copyright (C) 2007,2008 Gregory Nutt. All rights reserved.
  *   Author: Gregory Nutt <spudmonkey@racsa.co.cr>
@@ -65,6 +65,26 @@
  ****************************************************************************/
 
 /****************************************************************************
+ * Name: z80_sigsetup
+ ****************************************************************************/
+
+static void z80_sigsetup(FAR _TCB *tcb, sig_deliver_t sigdeliver, FAR chipreg_t *regs)
+{
+  /* Save the return address and interrupt state. These will be restored by
+   * the signal trampoline after the signals have been delivered.
+   */
+
+  tcb->xcp.sigdeliver    = sigdeliver;
+  tcb->xcp.saved_pc      = regs[XCPT_PC];
+  tcb->xcp.saved_i       = regs[XCPT_I];
+
+  /* Then set up to vector to the trampoline with interrupts disabled */
+
+  regs[XCPT_PC]  = (chipreg_t)up_sigdeliver;
+  regs[XCPT_I]   = 0;
+}
+
+/****************************************************************************
  * Public Functions
  ****************************************************************************/
 
@@ -107,7 +127,7 @@ void up_schedule_sigaction(FAR _TCB *tcb, sig_deliver_t sigdeliver)
 
   /* Refuse to handle nested signal actions */
 
-  if (!SIGNAL_DELIVERING(tcb))
+  if (tcb->xcp.sigdeliver == NULL)
     {
       irqstate_t flags;
 
@@ -142,7 +162,7 @@ void up_schedule_sigaction(FAR _TCB *tcb, sig_deliver_t sigdeliver)
             {
               /* Set up to vector to the trampoline with interrupts disabled. */
 
-              SIGNAL_SETUP(tcb, sigdeliver, IRQ_STATE());
+              z80_sigsetup(tcb, sigdeliver, IRQ_STATE());
 
               /* And make sure that the saved context in the TCB
                * is the same as the interrupt return context.
@@ -161,7 +181,7 @@ void up_schedule_sigaction(FAR _TCB *tcb, sig_deliver_t sigdeliver)
         {
           /* Set up to vector to the trampoline with interrupts disabled. */
 
-          SIGNAL_SETUP(tcb, sigdeliver, tcb->xcp.regs);
+          z80_sigsetup(tcb, sigdeliver, tcb->xcp.regs);
         }
 
       irqrestore(flags);
diff --git a/nuttx/arch/z80/src/common/up_sigdeliver.c b/nuttx/arch/z80/src/z80/z80_sigdeliver.c
index 80fcb4e5c..299e06a9f 100644
--- a/nuttx/arch/z80/src/common/up_sigdeliver.c
+++ b/nuttx/arch/z80/src/z80/z80_sigdeliver.c
@@ -1,5 +1,5 @@
 /****************************************************************************
- * arch/z80/src/common/up_sigdeliver.c
+ * arch/z80/src/z80/z80_sigdeliver.c
  *
  *   Copyright (C) 2007, 2008 Gregory Nutt. All rights reserved.
  *   Author: Gregory Nutt <spudmonkey@racsa.co.cr>
@@ -101,15 +101,13 @@ void up_sigdeliver(void)
 
   /* Save the real return state on the stack. */
 
-  COPYSTATE(regs, rtcb->xcp.regs);
+  z80_copystate(regs, rtcb->xcp.regs);
   regs[XCPT_PC] = rtcb->xcp.saved_pc;
   regs[XCPT_I]  = rtcb->xcp.saved_i;
 
-  /* Get a local copy of the sigdeliver function pointer.
-   * we do this so that we can nullify the sigdeliver
-   * function point in the TCB and accept more signal
-   * deliveries while processing the current pending
-   * signals.
+  /* Get a local copy of the sigdeliver function pointer.  We do this so
+   * that we can nullify the sigdeliver function point in the TCB and accept
+   * more signal deliveries while processing the current pending signals.
    */
 
   sigdeliver           = rtcb->xcp.sigdeliver;
@@ -123,9 +121,8 @@ void up_sigdeliver(void)
 
   sigdeliver(rtcb);
 
-  /* Output any debug messaged BEFORE restoring errno
-   * (because they may alter errno), then restore the
-   * original errno that is needed by the user logic
+  /* Output any debug messaged BEFORE restoring errno (because they may alter
+   * errno), then restore the original errno that is needed by the user logic
    * (it is probably EINTR).
    */
 
@@ -137,7 +134,7 @@ void up_sigdeliver(void)
    */
 
   up_ledoff(LED_SIGNAL);
-  SIGNAL_RETURN(regs);
+  z80_restoreusercontext(regs);
 #endif
 }