Calibrate stm32 delay loop

git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@2150 42af7a65-404d-4744-a932-0658087f49c3

9 files changed, 24 insertions, 24 deletions

diff --git a/nuttx/configs/eagle100/httpd/defconfig b/nuttx/configs/eagle100/httpd/defconfig
index d36489d43..d6ae777cd 100644
--- a/nuttx/configs/eagle100/httpd/defconfig
+++ b/nuttx/configs/eagle100/httpd/defconfig
@@ -64,8 +64,8 @@
 # CONFIG_ARCH_CALIBRATION - Enables some build in instrumentation that
 #   cause a 100 second delay during boot-up.  This 100 second delay
 #   serves no purpose other than it allows you to calibratre
-# CONFIG_ARCH_LOOPSPERMSEC.  You simply use a stop watch to measure
-#   the 100 second delay then adjust CONFIG_ARCH_LOOPSPERMSEC until
+#   CONFIG_BOARD_LOOPSPERMSEC.  You simply use a stop watch to measure
+#   the 100 second delay then adjust CONFIG_BOARD_LOOPSPERMSEC until
 #   the delay actually is 100 seconds.
 #
 CONFIG_ARCH=arm
diff --git a/nuttx/configs/eagle100/nettest/defconfig b/nuttx/configs/eagle100/nettest/defconfig
index 27ce4e73c..c57b5a6f0 100644
--- a/nuttx/configs/eagle100/nettest/defconfig
+++ b/nuttx/configs/eagle100/nettest/defconfig
@@ -64,8 +64,8 @@
 # CONFIG_ARCH_CALIBRATION - Enables some build in instrumentation that
 #   cause a 100 second delay during boot-up.  This 100 second delay
 #   serves no purpose other than it allows you to calibratre
-# CONFIG_ARCH_LOOPSPERMSEC.  You simply use a stop watch to measure
-#   the 100 second delay then adjust CONFIG_ARCH_LOOPSPERMSEC until
+#   CONFIG_BOARD_LOOPSPERMSEC.  You simply use a stop watch to measure
+#   the 100 second delay then adjust CONFIG_BOARD_LOOPSPERMSEC until
 #   the delay actually is 100 seconds.
 #
 CONFIG_ARCH=arm
diff --git a/nuttx/configs/eagle100/nsh/defconfig b/nuttx/configs/eagle100/nsh/defconfig
index d49b9834f..d77c8b281 100644
--- a/nuttx/configs/eagle100/nsh/defconfig
+++ b/nuttx/configs/eagle100/nsh/defconfig
@@ -64,8 +64,8 @@
 # CONFIG_ARCH_CALIBRATION - Enables some build in instrumentation that
 #   cause a 100 second delay during boot-up.  This 100 second delay
 #   serves no purpose other than it allows you to calibratre
-# CONFIG_ARCH_LOOPSPERMSEC.  You simply use a stop watch to measure
-#   the 100 second delay then adjust CONFIG_ARCH_LOOPSPERMSEC until
+#   CONFIG_BOARD_LOOPSPERMSEC.  You simply use a stop watch to measure
+#   the 100 second delay then adjust CONFIG_BOARD_LOOPSPERMSEC until
 #   the delay actually is 100 seconds.
 #
 CONFIG_ARCH=arm
diff --git a/nuttx/configs/eagle100/nxflat/defconfig b/nuttx/configs/eagle100/nxflat/defconfig
index 8c64c616f..291ecf074 100644
--- a/nuttx/configs/eagle100/nxflat/defconfig
+++ b/nuttx/configs/eagle100/nxflat/defconfig
@@ -64,8 +64,8 @@
 # CONFIG_ARCH_CALIBRATION - Enables some build in instrumentation that
 #   cause a 100 second delay during boot-up.  This 100 second delay
 #   serves no purpose other than it allows you to calibratre
-# CONFIG_ARCH_LOOPSPERMSEC.  You simply use a stop watch to measure
-#   the 100 second delay then adjust CONFIG_ARCH_LOOPSPERMSEC until
+#   CONFIG_BOARD_LOOPSPERMSEC.  You simply use a stop watch to measure
+#   the 100 second delay then adjust CONFIG_BOARD_LOOPSPERMSEC until
 #   the delay actually is 100 seconds.
 #
 CONFIG_ARCH=arm
diff --git a/nuttx/configs/eagle100/ostest/defconfig b/nuttx/configs/eagle100/ostest/defconfig
index 5bf355cb8..8216e3b70 100644
--- a/nuttx/configs/eagle100/ostest/defconfig
+++ b/nuttx/configs/eagle100/ostest/defconfig
@@ -64,8 +64,8 @@
 # CONFIG_ARCH_CALIBRATION - Enables some build in instrumentation that
 #   cause a 100 second delay during boot-up.  This 100 second delay
 #   serves no purpose other than it allows you to calibratre
-# CONFIG_ARCH_LOOPSPERMSEC.  You simply use a stop watch to measure
-#   the 100 second delay then adjust CONFIG_ARCH_LOOPSPERMSEC until
+#   CONFIG_BOARD_LOOPSPERMSEC.  You simply use a stop watch to measure
+#   the 100 second delay then adjust CONFIG_BOARD_LOOPSPERMSEC until
 #   the delay actually is 100 seconds.
 #
 CONFIG_ARCH=arm
diff --git a/nuttx/configs/eagle100/thttpd/defconfig b/nuttx/configs/eagle100/thttpd/defconfig
index c1ad521c5..dfbf14f9c 100644
--- a/nuttx/configs/eagle100/thttpd/defconfig
+++ b/nuttx/configs/eagle100/thttpd/defconfig
@@ -64,8 +64,8 @@
 # CONFIG_ARCH_CALIBRATION - Enables some build in instrumentation that
 #   cause a 100 second delay during boot-up.  This 100 second delay
 #   serves no purpose other than it allows you to calibratre
-# CONFIG_ARCH_LOOPSPERMSEC.  You simply use a stop watch to measure
-#   the 100 second delay then adjust CONFIG_ARCH_LOOPSPERMSEC until
+#   CONFIG_BOARD_LOOPSPERMSEC.  You simply use a stop watch to measure
+#   the 100 second delay then adjust CONFIG_BOARD_LOOPSPERMSEC until
 #   the delay actually is 100 seconds.
 #
 CONFIG_ARCH=arm
diff --git a/nuttx/configs/stm3210e-eval/RIDE/defconfig b/nuttx/configs/stm3210e-eval/RIDE/defconfig
index 69836b9a2..8dd155c99 100755
--- a/nuttx/configs/stm3210e-eval/RIDE/defconfig
+++ b/nuttx/configs/stm3210e-eval/RIDE/defconfig
@@ -62,9 +62,9 @@
 # CONFIG_ARCH_LEDS -  Use LEDs to show state. Unique to board architecture.
 # CONFIG_ARCH_CALIBRATION - Enables some build in instrumentation that
 #   cause a 100 second delay during boot-up.  This 100 second delay
-#   serves no purpose other than it allows you to calibratre
-# CONFIG_ARCH_LOOPSPERMSEC.  You simply use a stop watch to measure
-#   the 100 second delay then adjust CONFIG_ARCH_LOOPSPERMSEC until
+#   serves no purpose other than it allows you to calibrate
+#   CONFIG_BOARD_LOOPSPERMSEC.  You simply use a stop watch to measure
+#   the 100 second delay then adjust CONFIG_BOARD_LOOPSPERMSEC until
 #   the delay actually is 100 seconds.
 #
 CONFIG_ARCH=arm
@@ -74,7 +74,7 @@ CONFIG_ARCH_CHIP=stm32
 CONFIG_ARCH_CHIP_STM32F103ZET6=y
 CONFIG_ARCH_BOARD=stm3210e-eval
 CONFIG_ARCH_BOARD_STM3210E_EVAL=y
-CONFIG_BOARD_LOOPSPERMSEC=4531
+CONFIG_BOARD_LOOPSPERMSEC=5483
 CONFIG_DRAM_SIZE=0x00010000
 CONFIG_DRAM_START=0x20000000
 CONFIG_DRAM_END=(CONFIG_DRAM_START+CONFIG_DRAM_SIZE)
diff --git a/nuttx/configs/stm3210e-eval/nsh/defconfig b/nuttx/configs/stm3210e-eval/nsh/defconfig
index 1ad71ef60..18fab2704 100755
--- a/nuttx/configs/stm3210e-eval/nsh/defconfig
+++ b/nuttx/configs/stm3210e-eval/nsh/defconfig
@@ -62,9 +62,9 @@
 # CONFIG_ARCH_LEDS -  Use LEDs to show state. Unique to board architecture.
 # CONFIG_ARCH_CALIBRATION - Enables some build in instrumentation that
 #   cause a 100 second delay during boot-up.  This 100 second delay
-#   serves no purpose other than it allows you to calibratre
-# CONFIG_ARCH_LOOPSPERMSEC.  You simply use a stop watch to measure
-#   the 100 second delay then adjust CONFIG_ARCH_LOOPSPERMSEC until
+#   serves no purpose other than it allows you to calibrate
+#   CONFIG_BOARD_LOOPSPERMSEC.  You simply use a stop watch to measure
+#   the 100 second delay then adjust CONFIG_BOARD_LOOPSPERMSEC until
 #   the delay actually is 100 seconds.
 #
 CONFIG_ARCH=arm
@@ -74,7 +74,7 @@ CONFIG_ARCH_CHIP=stm32
 CONFIG_ARCH_CHIP_STM32F103ZET6=y
 CONFIG_ARCH_BOARD=stm3210e-eval
 CONFIG_ARCH_BOARD_STM3210E_EVAL=y
-CONFIG_BOARD_LOOPSPERMSEC=4531
+CONFIG_BOARD_LOOPSPERMSEC=5483
 CONFIG_DRAM_SIZE=0x00010000
 CONFIG_DRAM_START=0x20000000
 CONFIG_DRAM_END=(CONFIG_DRAM_START+CONFIG_DRAM_SIZE)
diff --git a/nuttx/configs/stm3210e-eval/ostest/defconfig b/nuttx/configs/stm3210e-eval/ostest/defconfig
index f490ea9fc..417dc5384 100755
--- a/nuttx/configs/stm3210e-eval/ostest/defconfig
+++ b/nuttx/configs/stm3210e-eval/ostest/defconfig
@@ -62,9 +62,9 @@
 # CONFIG_ARCH_LEDS -  Use LEDs to show state. Unique to board architecture.
 # CONFIG_ARCH_CALIBRATION - Enables some build in instrumentation that
 #   cause a 100 second delay during boot-up.  This 100 second delay
-#   serves no purpose other than it allows you to calibratre
-# CONFIG_ARCH_LOOPSPERMSEC.  You simply use a stop watch to measure
-#   the 100 second delay then adjust CONFIG_ARCH_LOOPSPERMSEC until
+#   serves no purpose other than it allows you to calibrate
+#   CONFIG_BOARD_LOOPSPERMSEC.  You simply use a stop watch to measure
+#   the 100 second delay then adjust CONFIG_BOARD_LOOPSPERMSEC until
 #   the delay actually is 100 seconds.
 #
 CONFIG_ARCH=arm
@@ -74,7 +74,7 @@ CONFIG_ARCH_CHIP=stm32
 CONFIG_ARCH_CHIP_STM32F103ZET6=y
 CONFIG_ARCH_BOARD=stm3210e-eval
 CONFIG_ARCH_BOARD_STM3210E_EVAL=y
-CONFIG_BOARD_LOOPSPERMSEC=4531
+CONFIG_BOARD_LOOPSPERMSEC=5483
 CONFIG_DRAM_SIZE=0x00010000
 CONFIG_DRAM_START=0x20000000
 CONFIG_DRAM_END=(CONFIG_DRAM_START+CONFIG_DRAM_SIZE)