/************************************************************************************
 * include/nuttx/usb/storage.h
 *
 *   Copyright (C) 2008-2011 Gregory Nutt. All rights reserved.
 *   Author: Gregory Nutt <gnutt@nuttx.org>
 *
 * References:
 *   "Universal Serial Bus Mass Storage Class, Specification Overview,"
 *   Revision 1.2,  USB Implementer's Forum, June 23, 2003.
 *
 *   "Universal Serial Bus Mass Storage Class, Bulk-Only Transport,"
 *   Revision 1.0, USB Implementer's Forum, September 31, 1999.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 *
 * 1. Redistributions of source code must retain the above copyright
 *    notice, this list of conditions and the following disclaimer.
 * 2. Redistributions in binary form must reproduce the above copyright
 *    notice, this list of conditions and the following disclaimer in
 *    the documentation and/or other materials provided with the
 *    distribution.
 * 3. Neither the name NuttX nor the names of its contributors may be
 *    used to endorse or promote products derived from this software
 *    without specific prior written permission.
 *
 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
 * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
 * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
 * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
 * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
 * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
 * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
 * POSSIBILITY OF SUCH DAMAGE.
 *
 ************************************************************************************/

#ifndef __INCLUDE_NUTTX_USB_STORAGE_H
#define __INCLUDE_NUTTX_USB_STORAGE_H

/************************************************************************************
 * Included Files
 ************************************************************************************/

#include <nuttx/config.h>
#include <stdint.h>

/************************************************************************************
 * Pre-processor Definitions
 ************************************************************************************/

/* Mass storage requests */

#define USBMSC_TYPE_SETUPIN  (USB_DIR_IN|USB_REQ_TYPE_CLASS|USB_REQ_RECIPIENT_INTERFACE)
#define USBMSC_TYPE_SETUPOUT (USB_DIR_OUT|USB_REQ_TYPE_CLASS|USB_REQ_RECIPIENT_INTERFACE)

#define USBMSC_REQ_MSRESET           (0xff) /* Reset mass storage device and interface */
#define USBMSC_REQ_GETMAXLUN         (0xfe) /* Return number LUNs supported */

/* Mass storage subclass codes */

#define USBMSC_SUBCLASS_RBC          (0x01) /* Reduced block commands (e.g., flash devices) */
#define USBMSC_SUBCLASS_SFF1         (0x02) /* SFF-8020i/MMC-2 (ATAPI) (e.g., C/DVD) */
#define USBMSC_SUBCLASS_QIC          (0x03) /* QIC-157 (e.g., tape device) */
#define USBMSC_SUBCLASS_UFI          (0x04) /* e.g. floppy device */
#define USBMSC_SUBCLASS_SFF2         (0x05) /* SFF-8070i (e.g. floppy disk) */
#define USBMSC_SUBCLASS_SCSI         (0x06) /* SCSI transparent */

/* Mass storage transport protocols */

#define USBMSC_PROTO_CBI0            (0x00) /* CBI transport with command completion interrupt */
#define USBMSC_PROTO_CBI1            (0x01) /* CBI transport without command completion interrupt */
#define USBMSC_PROTO_BULKONLY        (0x50) /* Bulk only transport */

/* Common Block Wrapper (CBW) */

#define USBMSC_CBW_SIZEOF            (31)
#define USBMSC_CBW_SIGNATURE         (0x43425355)   /*  Little endian USBC */
#define USBMSC_CBWFLAG_IN            (0x80)         /* Bit 7=1: Direction = IN */

#define USBMSC_MAXCDBLEN             (16)           /* Max length of SCSI Command Data Block */

/* Command Status Wrapper (CSW) */

#define USBMSC_CSW_SIZEOF            (13)
#define USBMSC_CSW_SIGNATURE         (0x53425355)   /* Little endian 'USBS' */
#define USBMSC_CSWSTATUS_PASS        (0)
#define USBMSC_CSWSTATUS_FAIL        (1)
#define USBMSC_CSWSTATUS_PHASEERROR  (2)

/************************************************************************************
 * Public Types
 ************************************************************************************/

/* Command Block Wrapper (CBW) */

struct usbmsc_cbw_s
{
  uint8_t signature[4];           /* 'USBC' = 0x43425355 */
  uint8_t tag[4];                 /* Depends on command id */
  uint8_t datlen[4];              /* Number of bytes that host expects to transfer */
  uint8_t flags;                  /* Bit 7: Direction=IN (other obsolete or reserved) */
  uint8_t lun;                    /* LUN (normally 0) */
  uint8_t cdblen;                 /* len of cdb[] */
  uint8_t cdb[USBMSC_MAXCDBLEN];  /* Command Data Block */
};

/* Command Status Wrapper (CSW) */

struct usbmsc_csw_s
{
  uint8_t signature[4];           /* 'USBS' = 0x53425355 */
  uint8_t tag[4];                 /* Same tag as original command */
  uint8_t residue[4];             /* Amount not transferred */
  uint8_t status;                 /* Status of transfer */
};

/************************************************************************************
 * Public Data
 ************************************************************************************/

/************************************************************************************
 * Public Functions
 ************************************************************************************/

#endif /* __INCLUDE_NUTTX_USB_STORAGE_H */