/****************************************************************************
*
* Copyright (C) 2012 PX4 Development Team. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name PX4 nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
****************************************************************************/
/**
* @file px4fmu_init.c
*
* PX4FMU-specific early startup code. This file implements the
* nsh_archinitialize() function that is called early by nsh during startup.
*
* Code here is run before the rcS script is invoked; it should start required
* subsystems and perform board-specific initialisation.
*/
/****************************************************************************
* Included Files
****************************************************************************/
#include <nuttx/config.h>
#include <stdbool.h>
#include <stdio.h>
#include <debug.h>
#include <errno.h>
#include <nuttx/arch.h>
#include <nuttx/spi.h>
#include <nuttx/i2c.h>
#include <nuttx/sdio.h>
#include <nuttx/mmcsd.h>
#include <nuttx/analog/adc.h>
#include <nuttx/gran.h>
#include <stm32.h>
#include "board_config.h"
#include <stm32_uart.h>
#include <arch/board/board.h>
#include <drivers/drv_hrt.h>
#include <drivers/drv_led.h>
#include <systemlib/cpuload.h>
#include <systemlib/perf_counter.h>
/****************************************************************************
* Pre-Processor Definitions
****************************************************************************/
/* Configuration ************************************************************/
/* Debug ********************************************************************/
#ifdef CONFIG_CPP_HAVE_VARARGS
# ifdef CONFIG_DEBUG
# define message(...) lowsyslog(__VA_ARGS__)
# else
# define message(...) printf(__VA_ARGS__)
# endif
#else
# ifdef CONFIG_DEBUG
# define message lowsyslog
# else
# define message printf
# endif
#endif
/*
* Ideally we'd be able to get these from up_internal.h,
* but since we want to be able to disable the NuttX use
* of leds for system indication at will and there is no
* separate switch, we need to build independent of the
* CONFIG_ARCH_LEDS configuration switch.
*/
__BEGIN_DECLS
extern void led_init(void);
extern void led_on(int led);
extern void led_off(int led);
__END_DECLS
/****************************************************************************
* Protected Functions
****************************************************************************/
#if defined(CONFIG_FAT_DMAMEMORY)
# if !defined(CONFIG_GRAN) || !defined(CONFIG_FAT_DMAMEMORY)
# error microSD DMA support requires CONFIG_GRAN
# endif
static GRAN_HANDLE dma_allocator;
/*
* The DMA heap size constrains the total number of things that can be
* ready to do DMA at a time.
*
* For example, FAT DMA depends on one sector-sized buffer per filesystem plus
* one sector-sized buffer per file.
*
* We use a fundamental alignment / granule size of 64B; this is sufficient
* to guarantee alignment for the largest STM32 DMA burst (16 beats x 32bits).
*/
static uint8_t g_dma_heap[8192] __attribute__((aligned(64)));
static perf_counter_t g_dma_perf;
static void
dma_alloc_init(void)
{
dma_allocator = gran_initialize(g_dma_heap,
sizeof(g_dma_heap),
7, /* 128B granule - must be > alignment (XXX bug?) */
6); /* 64B alignment */
if (dma_allocator == NULL) {
message("[boot] DMA allocator setup FAILED");
} else {
g_dma_perf = perf_alloc(PC_COUNT, "DMA allocations");
}
}
/****************************************************************************
* Public Functions
****************************************************************************/
/*
* DMA-aware allocator stubs for the FAT filesystem.
*/
__EXPORT void *fat_dma_alloc(size_t size);
__EXPORT void fat_dma_free(FAR void *memory, size_t size);
void *
fat_dma_alloc(size_t size)
{
perf_count(g_dma_perf);
return gran_alloc(dma_allocator, size);
}
void
fat_dma_free(FAR void *memory, size_t size)
{
gran_free(dma_allocator, memory, size);
}
#else
# define dma_alloc_init()
#endif
/************************************************************************************
* Name: stm32_boardinitialize
*
* Description:
* All STM32 architectures must provide the following entry point. This entry point
* is called early in the intitialization -- after all memory has been configured
* and mapped but before any devices have been initialized.
*
************************************************************************************/
__EXPORT void
stm32_boardinitialize(void)
{
/* configure SPI interfaces */
stm32_spiinitialize();
/* configure LEDs */
up_ledinit();
}
/****************************************************************************
* Name: nsh_archinitialize
*
* Description:
* Perform architecture specific initialization
*
****************************************************************************/
static struct spi_dev_s *spi1;
static struct spi_dev_s *spi2;
static struct spi_dev_s *spi4;
static struct sdio_dev_s *sdio;
#include <math.h>
#ifdef __cplusplus
__EXPORT int matherr(struct __exception *e)
{
return 1;
}
#else
__EXPORT int matherr(struct exception *e)
{
return 1;
}
#endif
__EXPORT int nsh_archinitialize(void)
{
/* configure ADC pins */
stm32_configgpio(GPIO_ADC1_IN2); /* BATT_VOLTAGE_SENS */
stm32_configgpio(GPIO_ADC1_IN3); /* BATT_CURRENT_SENS */
stm32_configgpio(GPIO_ADC1_IN4); /* VDD_5V_SENS */
// stm32_configgpio(GPIO_ADC1_IN10); /* used by VBUS valid */
// stm32_configgpio(GPIO_ADC1_IN11); /* unused */
// stm32_configgpio(GPIO_ADC1_IN12); /* used by MPU6000 CS */
stm32_configgpio(GPIO_ADC1_IN13); /* FMU_AUX_ADC_1 */
stm32_configgpio(GPIO_ADC1_IN14); /* FMU_AUX_ADC_2 */
stm32_configgpio(GPIO_ADC1_IN15); /* PRESSURE_SENS */
/* configure power supply control/sense pins */
stm32_configgpio(GPIO_VDD_5V_PERIPH_EN);
stm32_configgpio(GPIO_VDD_3V3_SENSORS_EN);
stm32_configgpio(GPIO_VDD_BRICK_VALID);
stm32_configgpio(GPIO_VDD_SERVO_VALID);
stm32_configgpio(GPIO_VDD_5V_HIPOWER_OC);
stm32_configgpio(GPIO_VDD_5V_PERIPH_OC);
/* configure the high-resolution time/callout interface */
hrt_init();
/* configure the DMA allocator */
dma_alloc_init();
/* configure CPU load estimation */
#ifdef CONFIG_SCHED_INSTRUMENTATION
cpuload_initialize_once();
#endif
/* set up the serial DMA polling */
static struct hrt_call serial_dma_call;
struct timespec ts;
/*
* Poll at 1ms intervals for received bytes that have not triggered
* a DMA event.
*/
ts.tv_sec = 0;
ts.tv_nsec = 1000000;
hrt_call_every(&serial_dma_call,
ts_to_abstime(&ts),
ts_to_abstime(&ts),
(hrt_callout)stm32_serial_dma_poll,
NULL);
/* initial LED state */
drv_led_start();
led_off(LED_AMBER);
/* Configure SPI-based devices */
spi1 = up_spiinitialize(1);
if (!spi1) {
message("[boot] FAILED to initialize SPI port 1\n");
up_ledon(LED_AMBER);
return -ENODEV;
}
/* Default SPI1 to 1MHz and de-assert the known chip selects. */
SPI_SETFREQUENCY(spi1, 10000000);
SPI_SETBITS(spi1, 8);
SPI_SETMODE(spi1, SPIDEV_MODE3);
SPI_SELECT(spi1, PX4_SPIDEV_GYRO, false);
SPI_SELECT(spi1, PX4_SPIDEV_ACCEL_MAG, false);
SPI_SELECT(spi1, PX4_SPIDEV_BARO, false);
SPI_SELECT(spi1, PX4_SPIDEV_MPU, false);
up_udelay(20);
message("[boot] Initialized SPI port 1 (SENSORS)\n");
/* Get the SPI port for the FRAM */
spi2 = up_spiinitialize(2);
if (!spi2) {
message("[boot] FAILED to initialize SPI port 2\n");
up_ledon(LED_AMBER);
return -ENODEV;
}
/* Default SPI2 to 37.5 MHz (40 MHz rounded to nearest valid divider, F4 max)
* and de-assert the known chip selects. */
// XXX start with 10.4 MHz in FRAM usage and go up to 37.5 once validated
SPI_SETFREQUENCY(spi2, 12 * 1000 * 1000);
SPI_SETBITS(spi2, 8);
SPI_SETMODE(spi2, SPIDEV_MODE3);
SPI_SELECT(spi2, SPIDEV_FLASH, false);
message("[boot] Initialized SPI port 2 (RAMTRON FRAM)\n");
spi4 = up_spiinitialize(4);
/* Default SPI4 to 1MHz and de-assert the known chip selects. */
SPI_SETFREQUENCY(spi4, 10000000);
SPI_SETBITS(spi4, 8);
SPI_SETMODE(spi4, SPIDEV_MODE3);
SPI_SELECT(spi4, PX4_SPIDEV_EXT0, false);
SPI_SELECT(spi4, PX4_SPIDEV_EXT1, false);
message("[boot] Initialized SPI port 4\n");
#ifdef CONFIG_MMCSD
/* First, get an instance of the SDIO interface */
sdio = sdio_initialize(CONFIG_NSH_MMCSDSLOTNO);
if (!sdio) {
message("[boot] Failed to initialize SDIO slot %d\n",
CONFIG_NSH_MMCSDSLOTNO);
return -ENODEV;
}
/* Now bind the SDIO interface to the MMC/SD driver */
int ret = mmcsd_slotinitialize(CONFIG_NSH_MMCSDMINOR, sdio);
if (ret != OK) {
message("[boot] Failed to bind SDIO to the MMC/SD driver: %d\n", ret);
return ret;
}
/* Then let's guess and say that there is a card in the slot. There is no card detect GPIO. */
sdio_mediachange(sdio, true);
message("[boot] Initialized SDIO\n");
#endif
return OK;
}
