1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
|
/****************************************************************************
*
* Copyright (c) 2012, 2013 PX4 Development Team. All rights reserved.
* Author: Simon Wilks <sjwilks@gmail.com>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name PX4 nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
****************************************************************************/
/**
* @file messages.h
* @author Simon Wilks <sjwilks@gmail.com>
*
* Graupner HoTT Telemetry message generation.
*
*/
#ifndef MESSAGES_H_
#define MESSAGES_H
#include <stdlib.h>
/* The buffer size used to store messages. This must be at least as big as the number of
* fields in the largest message struct.
*/
#define MESSAGE_BUFFER_SIZE 50
/* The HoTT receiver demands a minimum 5ms period of silence after delivering its request.
* Note that the value specified here is lower than 5000 (5ms) as time is lost constucting
* the message after the read which takes some milliseconds.
*/
#define POST_READ_DELAY_IN_USECS 4000
/* A pause of 3ms is required between each uint8_t sent back to the HoTT receiver. Much lower
* values can be used in practise though.
*/
#define POST_WRITE_DELAY_IN_USECS 2000
// Protocol constants.
#define BINARY_MODE_REQUEST_ID 0x80 // Binary mode request.
#define START_BYTE 0x7c
#define STOP_BYTE 0x7d
#define TEMP_ZERO_CELSIUS 0x14
/* Electric Air Module (EAM) constants. */
#define ELECTRIC_AIR_MODULE 0x8e
#define EAM_SENSOR_ID 0xe0
/* The Electric Air Module message. */
struct eam_module_msg {
uint8_t start; /**< Start byte */
uint8_t eam_sensor_id; /**< EAM sensor ID */
uint8_t warning;
uint8_t sensor_id; /**< Sensor ID, why different? */
uint8_t alarm_inverse1;
uint8_t alarm_inverse2;
uint8_t cell1_L; /**< Lipo cell voltages. Not supported. */
uint8_t cell2_L;
uint8_t cell3_L;
uint8_t cell4_L;
uint8_t cell5_L;
uint8_t cell6_L;
uint8_t cell7_L;
uint8_t cell1_H;
uint8_t cell2_H;
uint8_t cell3_H;
uint8_t cell4_H;
uint8_t cell5_H;
uint8_t cell6_H;
uint8_t cell7_H;
uint8_t batt1_voltage_L; /**< Battery 1 voltage, lower 8-bits in steps of 0.02V */
uint8_t batt1_voltage_H;
uint8_t batt2_voltage_L; /**< Battery 2 voltage, lower 8-bits in steps of 0.02V */
uint8_t batt2_voltage_H;
uint8_t temperature1; /**< Temperature sensor 1. 20 = 0 degrees */
uint8_t temperature2;
uint8_t altitude_L; /**< Attitude (meters) lower 8-bits. 500 = 0 meters */
uint8_t altitude_H;
uint8_t current_L; /**< Current (mAh) lower 8-bits in steps of 0.1V */
uint8_t current_H;
uint8_t main_voltage_L; /**< Main power voltage lower 8-bits in steps of 0.1V */
uint8_t main_voltage_H;
uint8_t battery_capacity_L; /**< Used battery capacity in steps of 10mAh */
uint8_t battery_capacity_H;
uint8_t climbrate_L; /**< Climb rate in 0.01m/s. 0m/s = 30000 */
uint8_t climbrate_H;
uint8_t climbrate_3s; /**< Climb rate in m/3sec. 0m/3sec = 120 */
uint8_t rpm_L; /**< RPM Lower 8-bits In steps of 10 U/min */
uint8_t rpm_H;
uint8_t electric_min; /**< Flight time in minutes. */
uint8_t electric_sec; /**< Flight time in seconds. */
uint8_t speed_L; /**< Airspeed in km/h in steps of 1 km/h */
uint8_t speed_H;
uint8_t stop; /**< Stop byte */
uint8_t checksum; /**< Lower 8-bits of all bytes summed. */
};
void messages_init(void);
void build_eam_response(uint8_t *buffer, int *size);
#endif /* MESSAGES_H_ */
|
