add px4fmu-v2 config

64 files changed, 18705 insertions, 0 deletions

diff --git a/nuttx/configs/px4fmu-v2/Kconfig b/nuttx/configs/px4fmu-v2/Kconfig
new file mode 100644
index 000000000..124783605
--- /dev/null
+++ b/nuttx/configs/px4fmu-v2/Kconfig
@@ -0,0 +1,68 @@
+#
+# For a description of the syntax of this configuration file,
+# see misc/tools/kconfig-language.txt.
+#
+
+if ARCH_BOARD_STM32F4_DISCOVERY
+
+config STM32F4DISBB
+	bool "STM32F4DIS-BB base board"
+	default n
+	---help---
+		Select if you are using the STM32F4DIS-BB base board with the
+		STM32F4Discovery.
+
+config PM_BUTTONS
+	bool "PM button support"
+	default n
+	depends on PM && ARCH_IRQBUTTONS
+	---help---
+		Enable PM button EXTI interrupts to support PM testing
+
+config PM_BUTTON_ACTIVITY
+	int "Button PM activity weight"
+	default 10
+	depends on PM_BUTTONS
+	---help---
+		The activity weight to report to the power management subsystem when
+		a button is pressed.
+
+config PM_ALARM_SEC
+	int "PM_STANDBY delay (seconds)"
+	default 15
+	depends on PM && RTC_ALARM
+	---help---
+		Number of seconds to wait in PM_STANDBY before going to PM_STANDBY
+		mode.
+
+config PM_ALARM_NSEC
+	int "PM_STANDBY delay (nanoseconds)"
+	default 0
+	depends on PM && RTC_ALARM
+	---help---
+		Number of additional nanoseconds to wait in PM_STANDBY before going
+		to PM_STANDBY mode.
+
+config PM_SLEEP_WAKEUP
+	bool "PM_SLEEP wake-up alarm"
+	default n
+	depends on PM && RTC_ALARM
+	---help---
+		Wake-up of PM_SLEEP mode after a delay and resume normal operation.
+
+config PM_SLEEP_WAKEUP_SEC
+	int "PM_SLEEP delay (seconds)"
+	default 10
+	depends on PM && RTC_ALARM
+	---help---
+		Number of seconds to wait in PM_SLEEP before going to PM_STANDBY mode.
+
+config PM_SLEEP_WAKEUP_NSEC
+	int "PM_SLEEP delay (nanoseconds)"
+	default 0
+	depends on PM && RTC_ALARM
+	---help---
+		Number of additional nanoseconds to wait in PM_SLEEP before going to
+		PM_STANDBY mode.
+
+endif
diff --git a/nuttx/configs/px4fmu-v2/README.txt b/nuttx/configs/px4fmu-v2/README.txt
new file mode 100644
index 000000000..8e2de23e4
--- /dev/null
+++ b/nuttx/configs/px4fmu-v2/README.txt
@@ -0,0 +1,1762 @@
+README
+======
+
+This README discusses issues unique to NuttX configurations for the
+STMicro STM32F4Discovery development board featuring the STM32F407VGT6
+MCU. The STM32F407VGT6 is a 168MHz Cortex-M4 operation with 1Mbit Flash
+memory and 128kbytes. The board features:
+
+  - On-board ST-LINK/V2 for programming and debugging,
+  - LIS302DL, ST MEMS motion sensor, 3-axis digital output accelerometer,
+  - MP45DT02, ST MEMS audio sensor, omni-directional digital microphone,
+  - CS43L22, audio DAC with integrated class D speaker driver,
+  - Four LEDs and two push-buttons,
+  - USB OTG FS with micro-AB connector, and
+  - Easy access to most MCU pins.
+
+Refer to http://www.st.com/internet/evalboard/product/252419.jsp for
+further information about this board.
+
+Contents
+========
+
+  - Development Environment
+  - GNU Toolchain Options
+  - IDEs
+  - NuttX EABI "buildroot" Toolchain
+  - NuttX OABI "buildroot" Toolchain
+  - NXFLAT Toolchain
+  - LEDs
+  - PWM
+  - UARTs
+  - Timer Inputs/Outputs
+  - FPU
+  - STM32F4DIS-BB
+  - FSMC SRAM
+  - SSD1289
+  - UG-2864AMBAG01 / UG-2864HSWEG01
+  - STM32F4Discovery-specific Configuration Options
+  - Configurations
+
+Development Environment
+=======================
+
+  Either Linux or Cygwin on Windows can be used for the development environment.
+  The source has been built only using the GNU toolchain (see below).  Other
+  toolchains will likely cause problems.
+
+GNU Toolchain Options
+=====================
+
+  Toolchain Configurations
+  ------------------------
+  The NuttX make system has been modified to support the following different
+  toolchain options.
+
+  1. The CodeSourcery GNU toolchain,
+  2. The Atollic Toolchain,
+  3. The devkitARM GNU toolchain,
+  4. Raisonance GNU toolchain, or
+  5. The NuttX buildroot Toolchain (see below).
+
+  All testing has been conducted using the CodeSourcery toolchain for Windows.  To use
+  the Atollic, devkitARM, Raisonance GNU, or NuttX buildroot toolchain, you simply need to
+  add one of the following configuration options to your .config (or defconfig)
+  file:
+
+    CONFIG_ARMV7M_TOOLCHAIN_CODESOURCERYW=y  : CodeSourcery under Windows
+    CONFIG_ARMV7M_TOOLCHAIN_CODESOURCERYL=y  : CodeSourcery under Linux
+    CONFIG_ARMV7M_TOOLCHAIN_ATOLLIC=y        : The Atollic toolchain under Windows
+    CONFIG_ARMV7M_TOOLCHAIN_DEVKITARM=y      : devkitARM under Windows
+    CONFIG_ARMV7M_TOOLCHAIN_RAISONANCE=y     : Raisonance RIDE7 under Windows
+    CONFIG_ARMV7M_TOOLCHAIN_BUILDROOT=y      : NuttX buildroot under Linux or Cygwin (default)
+
+  If you change the default toolchain, then you may also have to modify the PATH in
+  the setenv.h file if your make cannot find the tools.
+
+  NOTE: the CodeSourcery (for Windows), Atollic, devkitARM, and Raisonance toolchains are
+  Windows native toolchains.  The CodeSourcey (for Linux) and NuttX buildroot
+  toolchains are Cygwin and/or Linux native toolchains. There are several limitations
+  to using a Windows based toolchain in a Cygwin environment.  The three biggest are:
+
+  1. The Windows toolchain cannot follow Cygwin paths.  Path conversions are
+     performed automatically in the Cygwin makefiles using the 'cygpath' utility
+     but you might easily find some new path problems.  If so, check out 'cygpath -w'
+
+  2. Windows toolchains cannot follow Cygwin symbolic links.  Many symbolic links
+     are used in Nuttx (e.g., include/arch).  The make system works around these
+     problems for the Windows tools by copying directories instead of linking them.
+     But this can also cause some confusion for you:  For example, you may edit
+     a file in a "linked" directory and find that your changes had no effect.
+     That is because you are building the copy of the file in the "fake" symbolic
+     directory.  If you use a Windows toolchain, you should get in the habit of
+     making like this:
+
+       make clean_context all
+
+     An alias in your .bashrc file might make that less painful.
+
+  3. Dependencies are not made when using Windows versions of the GCC.  This is
+     because the dependencies are generated using Windows pathes which do not
+     work with the Cygwin make.
+
+       MKDEP                = $(TOPDIR)/tools/mknulldeps.sh
+
+  The CodeSourcery Toolchain (2009q1)
+  -----------------------------------
+  The CodeSourcery toolchain (2009q1) does not work with default optimization
+  level of -Os (See Make.defs).  It will work with -O0, -O1, or -O2, but not with
+  -Os.
+
+  The Atollic "Pro" and "Lite" Toolchain
+  --------------------------------------
+  One problem that I had with the Atollic toolchains is that the provide a gcc.exe
+  and g++.exe in the same bin/ file as their ARM binaries.  If the Atollic bin/ path
+  appears in your PATH variable before /usr/bin, then you will get the wrong gcc
+  when you try to build host executables.  This will cause to strange, uninterpretable
+  errors build some host binaries in tools/ when you first make.
+
+  Also, the Atollic toolchains are the only toolchains that have built-in support for
+  the FPU in these configurations.  If you plan to use the Cortex-M4 FPU, you will
+  need to use the Atollic toolchain for now.  See the FPU section below for more
+  information.
+
+  The Atollic "Lite" Toolchain
+  ----------------------------
+  The free, "Lite" version of the Atollic toolchain does not support C++ nor
+  does it support ar, nm, objdump, or objdcopy. If you use the Atollic "Lite"
+  toolchain, you will have to set:
+
+    CONFIG_HAVE_CXX=n
+
+  In order to compile successfully.  Otherwise, you will get errors like:
+
+    "C++ Compiler only available in TrueSTUDIO Professional"
+
+  The make may then fail in some of the post link processing because of some of
+  the other missing tools.  The Make.defs file replaces the ar and nm with
+  the default system x86 tool versions and these seem to work okay.  Disable all
+  of the following to avoid using objcopy:
+
+    CONFIG_RRLOAD_BINARY=n
+    CONFIG_INTELHEX_BINARY=n
+    CONFIG_MOTOROLA_SREC=n
+    CONFIG_RAW_BINARY=n
+
+  devkitARM
+  ---------
+  The devkitARM toolchain includes a version of MSYS make.  Make sure that the
+  the paths to Cygwin's /bin and /usr/bin directories appear BEFORE the devkitARM
+  path or will get the wrong version of make.
+
+IDEs
+====
+
+  NuttX is built using command-line make.  It can be used with an IDE, but some
+  effort will be required to create the project.
+
+  Makefile Build
+  --------------
+  Under Eclipse, it is pretty easy to set up an "empty makefile project" and
+  simply use the NuttX makefile to build the system.  That is almost for free
+  under Linux.  Under Windows, you will need to set up the "Cygwin GCC" empty
+  makefile project in order to work with Windows (Google for "Eclipse Cygwin" -
+  there is a lot of help on the internet).
+
+  Native Build
+  ------------
+  Here are a few tips before you start that effort:
+
+  1) Select the toolchain that you will be using in your .config file
+  2) Start the NuttX build at least one time from the Cygwin command line
+     before trying to create your project.  This is necessary to create
+     certain auto-generated files and directories that will be needed.
+  3) Set up include pathes:  You will need include/, arch/arm/src/stm32,
+     arch/arm/src/common, arch/arm/src/armv7-m, and sched/.
+  4) All assembly files need to have the definition option -D __ASSEMBLY__
+     on the command line.
+
+  Startup files will probably cause you some headaches.  The NuttX startup file
+  is arch/arm/src/stm32/stm32_vectors.S.  With RIDE, I have to build NuttX
+  one time from the Cygwin command line in order to obtain the pre-built
+  startup object needed by RIDE.
+
+NuttX EABI "buildroot" Toolchain
+================================
+
+  A GNU GCC-based toolchain is assumed.  The files */setenv.sh should
+  be modified to point to the correct path to the Cortex-M3 GCC toolchain (if
+  different from the default in your PATH variable).
+
+  If you have no Cortex-M3 toolchain, one can be downloaded from the NuttX
+  SourceForge download site (https://sourceforge.net/projects/nuttx/files/buildroot/).
+  This GNU toolchain builds and executes in the Linux or Cygwin environment.
+
+  1. You must have already configured Nuttx in <some-dir>/nuttx.
+
+     cd tools
+     ./configure.sh STM32F4Discovery/<sub-dir>
+
+  2. Download the latest buildroot package into <some-dir>
+
+  3. unpack the buildroot tarball.  The resulting directory may
+     have versioning information on it like buildroot-x.y.z.  If so,
+     rename <some-dir>/buildroot-x.y.z to <some-dir>/buildroot.
+
+  4. cd <some-dir>/buildroot
+
+  5. cp configs/cortexm3-eabi-defconfig-4.6.3 .config
+
+  6. make oldconfig
+
+  7. make
+
+  8. Edit setenv.h, if necessary, so that the PATH variable includes
+     the path to the newly built binaries.
+
+  See the file configs/README.txt in the buildroot source tree.  That has more
+  details PLUS some special instructions that you will need to follow if you are
+  building a Cortex-M3 toolchain for Cygwin under Windows.
+
+  NOTE:  Unfortunately, the 4.6.3 EABI toolchain is not compatible with the
+  the NXFLAT tools.  See the top-level TODO file (under "Binary loaders") for
+  more information about this problem. If you plan to use NXFLAT, please do not
+  use the GCC 4.6.3 EABI toolchain; instead use the GCC 4.3.3 OABI toolchain.
+  See instructions below.
+
+NuttX OABI "buildroot" Toolchain
+================================
+
+  The older, OABI buildroot toolchain is also available.  To use the OABI
+  toolchain:
+
+  1. When building the buildroot toolchain, either (1) modify the cortexm3-eabi-defconfig-4.6.3
+     configuration to use EABI (using 'make menuconfig'), or (2) use an exising OABI
+     configuration such as cortexm3-defconfig-4.3.3
+
+  2. Modify the Make.defs file to use the OABI conventions:
+
+    +CROSSDEV = arm-nuttx-elf-
+    +ARCHCPUFLAGS = -mtune=cortex-m3 -march=armv7-m -mfloat-abi=soft
+    +NXFLATLDFLAGS2 = $(NXFLATLDFLAGS1) -T$(TOPDIR)/binfmt/libnxflat/gnu-nxflat-gotoff.ld -no-check-sections
+    -CROSSDEV = arm-nuttx-eabi-
+    -ARCHCPUFLAGS = -mcpu=cortex-m3 -mthumb -mfloat-abi=soft
+    -NXFLATLDFLAGS2 = $(NXFLATLDFLAGS1) -T$(TOPDIR)/binfmt/libnxflat/gnu-nxflat-pcrel.ld -no-check-sections
+
+NXFLAT Toolchain
+================
+
+  If you are *not* using the NuttX buildroot toolchain and you want to use
+  the NXFLAT tools, then you will still have to build a portion of the buildroot
+  tools -- just the NXFLAT tools.  The buildroot with the NXFLAT tools can
+  be downloaded from the NuttX SourceForge download site
+  (https://sourceforge.net/projects/nuttx/files/).
+
+  This GNU toolchain builds and executes in the Linux or Cygwin environment.
+
+  1. You must have already configured Nuttx in <some-dir>/nuttx.
+
+     cd tools
+     ./configure.sh lpcxpresso-lpc1768/<sub-dir>
+
+  2. Download the latest buildroot package into <some-dir>
+
+  3. unpack the buildroot tarball.  The resulting directory may
+     have versioning information on it like buildroot-x.y.z.  If so,
+     rename <some-dir>/buildroot-x.y.z to <some-dir>/buildroot.
+
+  4. cd <some-dir>/buildroot
+
+  5. cp configs/cortexm3-defconfig-nxflat .config
+
+  6. make oldconfig
+
+  7. make
+
+  8. Edit setenv.h, if necessary, so that the PATH variable includes
+     the path to the newly builtNXFLAT binaries.
+
+LEDs
+====
+
+The STM32F4Discovery board has four LEDs; green, orange, red and blue on the
+board. These LEDs are not used by the board port unless CONFIG_ARCH_LEDS is
+defined.  In that case, the usage by the board port is defined in
+include/board.h and src/up_leds.c. The LEDs are used to encode OS-related
+events as follows:
+
+  SYMBOL                Meaning                 LED1*    LED2     LED3     LED4
+                                                green    orange   red      blue
+  -------------------  -----------------------  -------  -------  -------  ------
+  LED_STARTED          NuttX has been started   ON       OFF      OFF      OFF
+  LED_HEAPALLOCATE     Heap has been allocated  OFF      ON       OFF      OFF
+  LED_IRQSENABLED      Interrupts enabled       ON       ON       OFF      OFF
+  LED_STACKCREATED     Idle stack created       OFF      OFF      ON       OFF
+  LED_INIRQ            In an interrupt**        ON       N/C      N/C      OFF
+  LED_SIGNAL           In a signal handler***   N/C      ON       N/C      OFF
+  LED_ASSERTION        An assertion failed      ON       ON       N/C      OFF
+  LED_PANIC            The system has crashed   N/C      N/C      N/C      ON
+  LED_IDLE             STM32 is is sleep mode   (Optional, not used)
+
+  * If LED1, LED2, LED3 are statically on, then NuttX probably failed to boot
+    and these LEDs will give you some indication of where the failure was
+ ** The normal state is LED3 ON and LED1 faintly glowing.  This faint glow
+    is because of timer interrupts that result in the LED being illuminated
+    on a small proportion of the time.
+*** LED2 may also flicker normally if signals are processed.
+
+PWM
+===
+
+The STM32F4Discovery has no real on-board PWM devices, but the board can be
+configured to output a pulse train using TIM4 CH2 on PD3.  This pin is
+available next to the audio jack.
+
+UARTs
+=====
+
+UART/USART PINS
+---------------
+
+USART1
+  CK      PA8
+  CTS     PA11*
+  RTS     PA12*
+  RX      PA10*, PB7
+  TX      PA9*, PB6*
+USART2
+  CK      PA4*, PD7
+  CTS     PA0*, PD3
+  RTS     PA1, PD4*
+  RX      PA3, PD6
+  TX      PA2, PD5*
+USART3
+  CK      PB12, PC12*, PD10
+  CTS     PB13, PD11
+  RTS     PB14, PD12*
+  RX      PB11, PC11, PD9
+  TX      PB10*, PC10*, PD8
+UART4
+  RX      PA1, PC11
+  TX      PA0*, PC10*
+UART5
+  RX      PD2
+  TX      PC12*
+USART6
+  CK      PC8, PG7**
+  CTS     PG13**, PG15**
+  RTS     PG12**, PG8**
+  RX      PC7*, PG9**
+  TX      PC6, PG14**
+
+ * Indicates pins that have other on-board functions and should be used only
+   with care (See table 5 in the STM32F4Discovery User Guide).  The rest are
+   free I/O pins.
+** Port G pins are not supported by the MCU
+
+Default USART/UART Configuration
+--------------------------------
+
+USART2 is enabled in most configurations (see */defconfig).  RX and TX are
+configured on pins PA3 and PA2, respectively (see include/board.h).
+
+These pins selections, however, conflict with Ethernet pin usage on the
+STM32F4DIS-BB base board.  The STM32F4DIS-BB base board provides RS-232
+drivers and a DB9 connector for USART6.  USART6 is the preferred serial
+console for use with the STM32F4DIS-BB.
+
+Timer Inputs/Outputs
+====================
+
+TIM1
+  CH1     PA8, PE9
+  CH2     PA9*, PE11
+  CH3     PA10*, PE13
+  CH4     PA11*, PE14
+TIM2
+  CH1     PA0*, PA15, PA5*
+  CH2     PA1, PB3*
+  CH3     PA2, PB10*
+  CH4     PA3, PB11
+TIM3
+  CH1     PA6*, PB4, PC6
+  CH2     PA7*, PB5, PC7*
+  CH3     PB0, PC8
+  CH4     PB1, PC9
+TIM4
+  CH1     PB6*, PD12*
+  CH2     PB7, PD13*
+  CH3     PB8, PD14*
+  CH4     PB9*, PD15*
+TIM5
+  CH1     PA0*, PH10**
+  CH2     PA1, PH11**
+  CH3     PA2, PH12**
+  CH4     PA3, PI0
+TIM8
+  CH1     PC6, PI5
+  CH2     PC7*, PI6
+  CH3     PC8, PI7
+  CH4     PC9, PI2
+TIM9
+  CH1     PA2, PE5
+  CH2     PA3, PE6
+TIM10
+  CH1     PB8, PF6
+TIM11
+  CH1     PB9*, PF7
+TIM12
+  CH1     PH6**, PB14
+  CH2     PC15, PH9**
+TIM13
+  CH1     PA6*, PF8
+TIM14
+  CH1     PA7*, PF9
+
+ * Indicates pins that have other on-board functions and should be used only
+   with care (See table 5 in the STM32F4Discovery User Guide).  The rest are
+   free I/O pins.
+** Port H pins are not supported by the MCU
+
+Quadrature Encode Timer Inputs
+------------------------------
+
+If enabled (by setting CONFIG_QENCODER=y), then quadrature encoder will
+use either TIM2 or TIM8 (see nsh/defconfig).  If TIM2 is selected, the input
+pins PA15 and PA1 for CH1 and CH2, respectively).  If TIM8 is selected, then
+PC6 and PI5 will be used for CH1 and CH2  (see include board.h for pin
+definitions).
+
+FPU
+===
+
+FPU Configuration Options
+-------------------------
+
+There are two version of the FPU support built into the STM32 port.
+
+1. Lazy Floating Point Register Save.
+
+   This is an untested implementation that saves and restores FPU registers
+   only on context switches.  This means: (1) floating point registers are
+   not stored on each context switch and, hence, possibly better interrupt
+   performance.  But, (2) since floating point registers are not saved,
+   you cannot use floating point operations within interrupt handlers.
+
+   This logic can be enabled by simply adding the following to your .config
+   file:
+
+   CONFIG_ARCH_FPU=y
+
+2. Non-Lazy Floating Point Register Save
+
+   Mike Smith has contributed an extensive re-write of the ARMv7-M exception
+   handling logic. This includes verified support for the FPU.  These changes
+   have not yet been incorporated into the mainline and are still considered
+   experimental.  These FPU logic can be enabled with:
+
+   CONFIG_ARCH_FPU=y
+   CONFIG_ARMV7M_CMNVECTOR=y
+
+   You will probably also changes to the ld.script in if this option is selected.
+   This should work:
+
+   -ENTRY(_stext)
+   +ENTRY(__start)         /* Treat __start as the anchor for dead code stripping */
+   +EXTERN(_vectors)       /* Force the vectors to be included in the output */
+
+CFLAGS
+------
+
+Only recent GCC toolchains have built-in support for the Cortex-M4 FPU.  You will see
+the following lines in each Make.defs file:
+
+  ifeq ($(CONFIG_ARCH_FPU),y)
+    ARCHCPUFLAGS = -mcpu=cortex-m4 -mthumb -march=armv7e-m -mfpu=fpv4-sp-d16 -mfloat-abi=hard
+  else
+    ARCHCPUFLAGS = -mcpu=cortex-m3 -mthumb -mfloat-abi=soft
+  endif
+
+Configuration Changes
+---------------------
+
+Below are all of the configuration changes that I had to make to configs/stm3240g-eval/nsh2
+in order to successfully build NuttX using the Atollic toolchain WITH FPU support:
+
+  -CONFIG_ARCH_FPU=n              : Enable FPU support
+  +CONFIG_ARCH_FPU=y
+
+  -CONFIG_ARMV7M_TOOLCHAIN_CODESOURCERYW=y   : Disable the CodeSourcery toolchain
+  +CONFIG_ARMV7M_TOOLCHAIN_CODESOURCERYW=n
+
+  -CONFIG_ARMV7M_TOOLCHAIN_ATOLLIC=n         : Enable the Atollic toolchain
+  +CONFIG_ARMV7M_TOOLCHAIN_ATOLLIC=y        :
+
+  -CONFIG_INTELHEX_BINARY=y       : Suppress generation FLASH download formats
+  +CONFIG_INTELHEX_BINARY=n       : (Only necessary with the "Lite" version)
+
+  -CONFIG_HAVE_CXX=y              : Suppress generation of C++ code
+  +CONFIG_HAVE_CXX=n              : (Only necessary with the "Lite" version)
+
+See the section above on Toolchains, NOTE 2, for explanations for some of
+the configuration settings.  Some of the usual settings are just not supported
+by the "Lite" version of the Atollic toolchain.
+
+STM32F4DIS-BB
+=============
+
+On-board PIO usage:
+
+  ---------- ------------- ------------------------------
+  PIO        SIGNAL        FUNCTION
+  ---------- ------------- ------------------------------
+  PB11       TXEN          LAN8720
+  PB12       TXD0
+  PB13       TXD1
+  PC4        RXD0/MODE0
+  PC5        RXD1/MODE1
+  PA7        RXDR/PHYAD0
+  PA2        MDIO
+  PC1        MDC
+  PA1        NINT/REFCLK0
+  PE2        NRST
+  ---------- ------------- ------------------------------
+  PC6        D2            DCMI
+  PC7        D3
+  PE0        D4
+  PE1        D5
+  PE4        D6
+  PB6        D7
+  PE5        D8
+  PE6        D9
+  PA6        PCLK
+  PA4        HS
+  PB7        VS
+  PD6        PWR_EN
+  PD12       RST
+  PB9        SDA
+  PB8        SCL
+  ---------- ------------- ------------------------------
+  USART6_TX  T1IN          SP3232EEY-L
+  USART6_RX  T2OUT
+  ---------- ------------- ------------------------------
+  PB15       NCD           MicroSD
+  PC9        DAT1
+  PC8        DAT0
+  PC12       CLK
+  PD2        CMD
+  PC11       CD/DAT3
+  PC10       DAT2
+  ---------- ------------- ------------------------------
+
+FSMC SRAM
+=========
+
+On-board SRAM
+-------------
+The STM32F4Discovery has no on-board SRAM.  The information here is only for
+reference in case you choose to add some.
+
+Configuration Options
+---------------------
+Internal SRAM is available in all members of the STM32 family. The F4 family
+also contains internal CCM SRAM.  This SRAM is different because it cannot
+be used for DMA.  So if DMA needed, then the following should be defined
+to exclude CCM SRAM from the heap:
+
+  CONFIG_STM32_CCMEXCLUDE    : Exclude CCM SRAM from the HEAP
+
+In addition to internal SRAM, SRAM may also be available through the FSMC.
+In order to use FSMC SRAM, the following additional things need to be
+present in the NuttX configuration file:
+
+  CONFIG_STM32_FSMC=y        : Enables the FSMC
+  CONFIG_STM32_FSMC_SRAM=y   : Indicates that SRAM is available via the
+                               FSMC (as opposed to an LCD or FLASH).
+  CONFIG_HEAP2_BASE          : The base address of the SRAM in the FSMC
+                               address space
+  CONFIG_HEAP2_SIZE          : The size of the SRAM in the FSMC
+                               address space
+  CONFIG_MM_REGIONS          : Must be set to a large enough value to
+                               include the FSMC SRAM
+
+SRAM Configurations
+-------------------
+There are 4 possible SRAM configurations:
+
+  Configuration 1. System SRAM (only)
+                   CONFIG_MM_REGIONS == 1
+                   CONFIG_STM32_FSMC_SRAM NOT defined
+                   CONFIG_STM32_CCMEXCLUDE defined
+  Configuration 2. System SRAM and CCM SRAM
+                   CONFIG_MM_REGIONS == 2
+                   CONFIG_STM32_FSMC_SRAM NOT defined
+                   CONFIG_STM32_CCMEXCLUDE NOT defined
+  Configuration 3. System SRAM and FSMC SRAM
+                   CONFIG_MM_REGIONS == 2
+                   CONFIG_STM32_FSMC_SRAM defined
+                   CONFIG_STM32_CCMEXCLUDE defined
+  Configuration 4. System SRAM, CCM SRAM, and FSMC SRAM
+                   CONFIG_MM_REGIONS == 3
+                   CONFIG_STM32_FSMC_SRAM defined
+                   CONFIG_STM32_CCMEXCLUDE NOT defined
+
+SSD1289
+=======
+
+I purchased an LCD display on eBay from China.  The LCD is 320x240 RGB565 and
+is based on an SSD1289 LCD controller and an XPT2046 touch IC.  The pin out
+from the 2x16 connect on the LCD is labelled as follows:
+
+LCD CONNECTOR:          SSD1289 MPU INTERFACE PINS:
+
+   +------+------+      DEN     I  Display enable pin
+1  | GND  | 3V3  |  2   VSYNC   I  Frame synchronization signal
+   +------+------+      HSYNC   I  Line synchronization signal
+3  | D1   | D0   |  4   DOTCLK  I  Dot clock and OSC source
+   +------+------+      DC      I  Data or command
+5  | D3   | D2   |  6   E (~RD) I  Enable/Read strobe
+   +------+------+      R (~WR) I  Read/Write strobe
+7  | D5   | D4   |  8   D0-D17  IO For parallel mode, 8/9/16/18 bit interface
+   +------+------+      WSYNC   O  RAM write synchronizatin output
+9  | D7   | D6   | 10   ~RES    I  System reset
+   +------+------+      ~CS     I  Chip select of serial interface
+11 | D9   | D8   | 12   SCK     I  Clock of serial interface
+   +------+------+      SDI     I  Data input in serial mode
+13 | D11  | D10  | 14   SDO     O  Data output in serial moce
+   +------+------+
+15 | D13  | D12  | 16
+   +------+------+
+17 | D15  | D14  | 18
+   +------+------+
+19 | RS   | CS   | 20
+   +------+------+
+21 | RD   | WR   | 22  NOTES:
+   +------+------+
+23 |BL_CNT|RESET | 24  BL_CNT is the PWM backlight level control.
+   +------+------+
+25 |TP_RQ |TP_S0 | 26  These pins are for the touch panel: TP_REQ
+   +------+------+     TP_S0, TP_SI, TP_SCX, and TP_CS
+27 | NC   |TP_SI | 28
+   +------+------+
+29 | NC   |TP_SCX| 30
+   +------+------+
+31 | NC   |TP_CS | 32
+   +------+------+
+
+MAPPING TO STM32 F4:
+
+  ---------------- -------------- ----------------------------------
+   STM32 FUNCTION  LCD PIN       STM32F4Discovery PIN
+  ---------------- -------------- ----------------------------------
+   FSMC_D0          D0     pin 4   PD14 P1 pin 46 Conflict (Note 1)
+   FSMC_D1          D1     pin 3   PD15 P1 pin 47 Conflict (Note 2)
+   FSMC_D2          D2     pin 6   PD0  P2 pin 36 Free I/O
+   FSMC_D3          D3     pin 5   PD1  P2 pin 33 Free I/O
+   FSMC_D4          D4     pin 8   PE7  P1 pin 25 Free I/O
+   FSMC_D5          D5     pin 7   PE8  P1 pin 26 Free I/O
+   FSMC_D6          D6     pin 10  PE9  P1 pin 27 Free I/O
+   FSMC_D7          D7     pin 9   PE10 P1 pin 28 Free I/O
+   FSMC_D8          D8     pin 12  PE11 P1 pin 29 Free I/O
+   FSMC_D9          D9     pin 11  PE12 P1 pin 30 Free I/O
+   FSMC_D10         D10    pin 14  PE13 P1 pin 31 Free I/O
+   FSMC_D11         D11    pin 13  PE14 P1 pin 32 Free I/O
+   FSMC_D12         D12    pin 16  PE15 P1 pin 33 Free I/O
+   FSMC_D13         D13    pin 15  PD8  P1 pin 40 Free I/O
+   FSMC_D14         D14    pin 18  PD9  P1 pin 41 Free I/O
+   FSMC_D15         D15    pin 17  PD10 P1 pin 42 Free I/O
+   FSMC_A16         RS     pin 19  PD11 P1 pin 27 Free I/O
+   FSMC_NE1         ~CS    pin 10  PD7  P2 pin 27 Free I/O
+   FSMC_NWE         ~WR    pin 22  PD5  P2 pin 29 Conflict (Note 3)
+   FSMC_NOE         ~RD    pin 21  PD4  P2 pin 32 Conflict (Note 4)
+   PC6              RESET  pin 24  PC6  P2 pin 47 Free I/O
+   Timer ouput      BL_CNT pin 23  (to be determined)
+  ---------------- -------------- ----------------------------------
+
+   1 Used for the RED LED
+   2 Used for the BLUE LED
+   3 Used for the RED LED and for OTG FS Overcurrent.  It may be okay to use
+     for the parallel interface if PC0 is held high (or floating).  PC0 enables
+     the STMPS2141STR IC power switch that drives the OTG FS host VBUS.
+   4 Also the reset pin for the CS43L22 audio Codec.
+
+NOTE:  The configuration to test this LCD configuration is available at
+configs/stm32f4discovery/nxlines.  As of this writing, I have not seen the
+LCD working so I probably have some things wrong.
+
+I might need to use a bit-banging interface.  Below is the pin configuration
+of a similar LCD to support a (write-only), bit banging interface:
+
+  LCD PIN   BOARD CONNECTION
+  LEDA      5V
+  VCC       5V
+  RD        3.3V
+  GND       GND
+  DB0-7     Port C pins configured as outputs
+  DB8-15    Port A pins configured as outputs
+  RS        Pin configured as output
+  WR        Pin configured as output
+  CS        Pin configured as output
+  RSET      Pin configured as output
+
+The following summarize the bit banging operations:
+
+  /* Rese the LCD */
+  void Reset(void)
+  {
+    Set RSET output
+    delay
+    Clear RSET output
+    delay
+    Set RSET output
+  }
+
+  /* Write 16-bits of whatever */
+  void Write16(uint8_t ms, uint8_t ls)
+  {
+    Set port A to ms
+    Set port B to ls
+
+    Clear WR pin
+    Set   WR pin
+  }
+
+  /* Set the index register to an LCD register address */
+  void Index(uint8_t address)
+  {
+    Clear RS
+    Write16(0, address);
+  }
+
+  /* Write data to the LCD register or GRAM memory */
+  void WriteData(uin16_t data)
+  {
+    Set RS
+    Write16(data >> 8, data & 0xff);
+  }
+
+  /* Write to a register */
+  void WriteRegister(uint8_t address, uint16_t data)
+  {
+    Index(address);
+    WriteData(data);
+  }
+
+UG-2864AMBAG01 / UG-2864HSWEG01
+===============================
+
+I purchased an OLED display on eBay.  The OLED is 128x64 monochrome and
+is based on an UG-2864AMBAG01 OLED controller.  The OLED can run in either
+parallel or SPI mode.  I am using SPI mode.  In SPI mode, the OLED is
+write only so the driver keeps a 128*64/8 = 1KB framebuffer to remember
+the display contents:
+
+Here is how I have the OLED connected.  But you can change this with the
+settings in include/board.h and src/stm324fdiscovery-internal.h.  Connector
+pinout for the UG-2864AMBAG01 is specific to the theO.net display board
+that I am using:
+
+  --------------------------+----------------------------------------------
+  Connector CON10 J1:       | STM32F4Discovery
+  --------------+-----------+----------------------------------------------
+  CON10 J1:     | CON20 J2: | P1/P2:
+  --------------+-----------+----------------------------------------------
+  1  3v3        | 3,4 3v3   | P2 3V
+  3  /RESET     | 8 /RESET  | P2 PB6 (Arbitrary selection)
+  5  /CS        | 7 /CS     | P2 PB7 (Arbitrary selection)
+  7  A0         | 9 A0      | P2 PB8 (Arbitrary selection)
+  9  LED+ (N/C) | -----     | -----
+  2  5V Vcc     | 1,2 Vcc   | P2 5V
+  4  DI         | 18 D1/SI  | P1 PA7 (GPIO_SPI1_MOSI == GPIO_SPI1_MOSI_1 (1))
+  6  SCLK       | 19 D0/SCL | P1 PA5 (GPIO_SPI1_SCK == GPIO_SPI1_SCK_1 (1))
+  8  LED- (N/C) | -----     | ------
+  10 GND        | 20 GND    | P2 GND
+  --------------+-----------+----------------------------------------------
+  (1) Required because of on-board MEMS
+  -------------------------------------------------------------------------
+
+Darcy Gong recently added support for the UG-2864HSWEG01 OLED which is also
+an option with this configuration.  I have little technical information about
+the UG-2864HSWEG01 interface (see configs/stm32f4discovery/src/up_ug2864hsweg01.c).
+
+STM32F4Discovery-specific Configuration Options
+===============================================
+
+    CONFIG_ARCH - Identifies the arch/ subdirectory.  This should
+       be set to:
+
+       CONFIG_ARCH=arm
+
+    CONFIG_ARCH_family - For use in C code:
+
+       CONFIG_ARCH_ARM=y
+
+    CONFIG_ARCH_architecture - For use in C code:
+
+       CONFIG_ARCH_CORTEXM4=y
+
+    CONFIG_ARCH_CHIP - Identifies the arch/*/chip subdirectory
+
+       CONFIG_ARCH_CHIP=stm32
+
+    CONFIG_ARCH_CHIP_name - For use in C code to identify the exact
+       chip:
+
+       CONFIG_ARCH_CHIP_STM32F407VG=y
+
+    CONFIG_ARCH_BOARD_STM32_CUSTOM_CLOCKCONFIG - Enables special STM32 clock
+       configuration features.
+
+       CONFIG_ARCH_BOARD_STM32_CUSTOM_CLOCKCONFIG=n
+
+    CONFIG_ARCH_BOARD - Identifies the configs subdirectory and
+       hence, the board that supports the particular chip or SoC.
+
+       CONFIG_ARCH_BOARD=STM32F4Discovery (for the STM32F4Discovery development board)
+
+    CONFIG_ARCH_BOARD_name - For use in C code
+
+       CONFIG_ARCH_BOARD_STM32F4_DISCOVERY=y
+
+    CONFIG_ARCH_LOOPSPERMSEC - Must be calibrated for correct operation
+       of delay loops
+
+    CONFIG_ENDIAN_BIG - define if big endian (default is little
+       endian)
+
+    CONFIG_RAM_SIZE - Describes the installed DRAM (SRAM in this case):
+
+       CONFIG_RAM_SIZE=0x00010000 (64Kb)
+
+    CONFIG_RAM_START - The start address of installed DRAM
+
+       CONFIG_RAM_START=0x20000000
+
+    CONFIG_STM32_CCMEXCLUDE - Exclude CCM SRAM from the HEAP
+
+    In addition to internal SRAM, SRAM may also be available through the FSMC.
+    In order to use FSMC SRAM, the following additional things need to be
+    present in the NuttX configuration file:
+
+    CONFIG_STM32_FSMC_SRAM - Indicates that SRAM is available via the
+      FSMC (as opposed to an LCD or FLASH).
+
+    CONFIG_HEAP2_BASE - The base address of the SRAM in the FSMC address space (hex)
+
+    CONFIG_HEAP2_SIZE - The size of the SRAM in the FSMC address space (decimal)
+
+    CONFIG_ARCH_FPU - The STM32F4Discovery supports a floating point unit (FPU)
+
+       CONFIG_ARCH_FPU=y
+
+    CONFIG_ARCH_LEDS - Use LEDs to show state. Unique to boards that
+       have LEDs
+
+    CONFIG_ARCH_INTERRUPTSTACK - This architecture supports an interrupt
+       stack. If defined, this symbol is the size of the interrupt
+        stack in bytes.  If not defined, the user task stacks will be
+      used during interrupt handling.
+
+    CONFIG_ARCH_STACKDUMP - Do stack dumps after assertions
+
+    CONFIG_ARCH_LEDS -  Use LEDs to show state. Unique to board architecture.
+
+    CONFIG_ARCH_CALIBRATION - Enables some build in instrumentation that
+       cause a 100 second delay during boot-up.  This 100 second delay
+       serves no purpose other than it allows you to calibrate
+       CONFIG_ARCH_LOOPSPERMSEC.  You simply use a stop watch to measure
+       the 100 second delay then adjust CONFIG_ARCH_LOOPSPERMSEC until
+       the delay actually is 100 seconds.
+
+  Individual subsystems can be enabled:
+
+    AHB1
+    ----
+    CONFIG_STM32_CRC
+    CONFIG_STM32_BKPSRAM
+    CONFIG_STM32_CCMDATARAM
+    CONFIG_STM32_DMA1
+    CONFIG_STM32_DMA2
+    CONFIG_STM32_ETHMAC
+    CONFIG_STM32_OTGHS
+
+    AHB2
+    ----
+    CONFIG_STM32_DCMI
+    CONFIG_STM32_CRYP
+    CONFIG_STM32_HASH
+    CONFIG_STM32_RNG
+    CONFIG_STM32_OTGFS
+
+    AHB3
+    ----
+    CONFIG_STM32_FSMC
+
+    APB1
+    ----
+    CONFIG_STM32_TIM2
+    CONFIG_STM32_TIM3
+    CONFIG_STM32_TIM4
+    CONFIG_STM32_TIM5
+    CONFIG_STM32_TIM6
+    CONFIG_STM32_TIM7
+    CONFIG_STM32_TIM12
+    CONFIG_STM32_TIM13
+    CONFIG_STM32_TIM14
+    CONFIG_STM32_WWDG
+    CONFIG_STM32_IWDG
+    CONFIG_STM32_SPI2
+    CONFIG_STM32_SPI3
+    CONFIG_STM32_USART2
+    CONFIG_STM32_USART3
+    CONFIG_STM32_UART4
+    CONFIG_STM32_UART5
+    CONFIG_STM32_I2C1
+    CONFIG_STM32_I2C2
+    CONFIG_STM32_I2C3
+    CONFIG_STM32_CAN1
+    CONFIG_STM32_CAN2
+    CONFIG_STM32_DAC1
+    CONFIG_STM32_DAC2
+    CONFIG_STM32_PWR -- Required for RTC
+
+    APB2
+    ----
+    CONFIG_STM32_TIM1
+    CONFIG_STM32_TIM8
+    CONFIG_STM32_USART1
+    CONFIG_STM32_USART6
+    CONFIG_STM32_ADC1
+    CONFIG_STM32_ADC2
+    CONFIG_STM32_ADC3
+    CONFIG_STM32_SDIO
+    CONFIG_STM32_SPI1
+    CONFIG_STM32_SYSCFG
+    CONFIG_STM32_TIM9
+    CONFIG_STM32_TIM10
+    CONFIG_STM32_TIM11
+
+  Timer devices may be used for different purposes.  One special purpose is
+  to generate modulated outputs for such things as motor control.  If CONFIG_STM32_TIMn
+  is defined (as above) then the following may also be defined to indicate that
+  the timer is intended to be used for pulsed output modulation, ADC conversion,
+  or DAC conversion. Note that ADC/DAC require two definition:  Not only do you have
+  to assign the timer (n) for used by the ADC or DAC, but then you also have to
+  configure which ADC or DAC (m) it is assigned to.
+
+    CONFIG_STM32_TIMn_PWM   Reserve timer n for use by PWM, n=1,..,14
+    CONFIG_STM32_TIMn_ADC   Reserve timer n for use by ADC, n=1,..,14
+    CONFIG_STM32_TIMn_ADCm  Reserve timer n to trigger ADCm, n=1,..,14, m=1,..,3
+    CONFIG_STM32_TIMn_DAC   Reserve timer n for use by DAC, n=1,..,14
+    CONFIG_STM32_TIMn_DACm  Reserve timer n to trigger DACm, n=1,..,14, m=1,..,2
+
+  For each timer that is enabled for PWM usage, we need the following additional
+  configuration settings:
+
+    CONFIG_STM32_TIMx_CHANNEL - Specifies the timer output channel {1,..,4}
+
+  NOTE: The STM32 timers are each capable of generating different signals on
+  each of the four channels with different duty cycles.  That capability is
+  not supported by this driver:  Only one output channel per timer.
+
+  JTAG Enable settings (by default only SW-DP is enabled):
+
+    CONFIG_STM32_JTAG_FULL_ENABLE - Enables full SWJ (JTAG-DP + SW-DP)
+    CONFIG_STM32_JTAG_NOJNTRST_ENABLE - Enables full SWJ (JTAG-DP + SW-DP)
+      but without JNTRST.
+    CONFIG_STM32_JTAG_SW_ENABLE - Set JTAG-DP disabled and SW-DP enabled
+
+  STM32F4Discovery specific device driver settings
+
+    CONFIG_U[S]ARTn_SERIAL_CONSOLE - selects the USARTn (n=1,2,3) or UART
+           m (m=4,5) for the console and ttys0 (default is the USART1).
+    CONFIG_U[S]ARTn_RXBUFSIZE - Characters are buffered as received.
+       This specific the size of the receive buffer
+    CONFIG_U[S]ARTn_TXBUFSIZE - Characters are buffered before
+       being sent.  This specific the size of the transmit buffer
+    CONFIG_U[S]ARTn_BAUD - The configure BAUD of the UART.  Must be
+    CONFIG_U[S]ARTn_BITS - The number of bits.  Must be either 7 or 8.
+    CONFIG_U[S]ARTn_PARTIY - 0=no parity, 1=odd parity, 2=even parity
+    CONFIG_U[S]ARTn_2STOP - Two stop bits
+
+  STM32F4Discovery CAN Configuration
+
+    CONFIG_CAN - Enables CAN support (one or both of CONFIG_STM32_CAN1 or
+      CONFIG_STM32_CAN2 must also be defined)
+    CONFIG_CAN_EXTID - Enables support for the 29-bit extended ID.  Default
+      Standard 11-bit IDs.
+    CONFIG_CAN_FIFOSIZE - The size of the circular buffer of CAN messages.
+      Default: 8
+    CONFIG_CAN_NPENDINGRTR - The size of the list of pending RTR requests.
+      Default: 4
+    CONFIG_CAN_LOOPBACK - A CAN driver may or may not support a loopback
+      mode for testing. The STM32 CAN driver does support loopback mode.
+    CONFIG_CAN1_BAUD - CAN1 BAUD rate.  Required if CONFIG_STM32_CAN1 is defined.
+    CONFIG_CAN2_BAUD - CAN1 BAUD rate.  Required if CONFIG_STM32_CAN2 is defined.
+    CONFIG_CAN_TSEG1 - The number of CAN time quanta in segment 1. Default: 6
+    CONFIG_CAN_TSEG2 - the number of CAN time quanta in segment 2. Default: 7
+    CONFIG_CAN_REGDEBUG - If CONFIG_DEBUG is set, this will generate an
+      dump of all CAN registers.
+
+  STM32F4Discovery SPI Configuration
+
+    CONFIG_STM32_SPI_INTERRUPTS - Select to enable interrupt driven SPI
+      support. Non-interrupt-driven, poll-waiting is recommended if the
+      interrupt rate would be to high in the interrupt driven case.
+    CONFIG_STM32_SPI_DMA - Use DMA to improve SPI transfer performance.
+      Cannot be used with CONFIG_STM32_SPI_INTERRUPT.
+
+  STM32F4Discovery DMA Configuration
+
+    CONFIG_SDIO_DMA - Support DMA data transfers.  Requires CONFIG_STM32_SDIO
+      and CONFIG_STM32_DMA2.
+    CONFIG_SDIO_PRI - Select SDIO interrupt prority.  Default: 128
+    CONFIG_SDIO_DMAPRIO - Select SDIO DMA interrupt priority.
+      Default:  Medium
+    CONFIG_SDIO_WIDTH_D1_ONLY - Select 1-bit transfer mode.  Default:
+      4-bit transfer mode.
+
+  STM32 USB OTG FS Host Driver Support
+
+  Pre-requisites
+
+   CONFIG_USBDEV          - Enable USB device support
+   CONFIG_USBHOST         - Enable USB host support
+   CONFIG_STM32_OTGFS     - Enable the STM32 USB OTG FS block
+   CONFIG_STM32_SYSCFG    - Needed
+   CONFIG_SCHED_WORKQUEUE - Worker thread support is required
+
+  Options:
+
+   CONFIG_STM32_OTGFS_RXFIFO_SIZE - Size of the RX FIFO in 32-bit words.
+     Default 128 (512 bytes)
+   CONFIG_STM32_OTGFS_NPTXFIFO_SIZE - Size of the non-periodic Tx FIFO
+     in 32-bit words.  Default 96 (384 bytes)
+   CONFIG_STM32_OTGFS_PTXFIFO_SIZE - Size of the periodic Tx FIFO in 32-bit
+     words.  Default 96 (384 bytes)
+   CONFIG_STM32_OTGFS_DESCSIZE - Maximum size of a descriptor.  Default: 128
+   CONFIG_STM32_OTGFS_SOFINTR - Enable SOF interrupts.  Why would you ever
+     want to do that?
+   CONFIG_STM32_USBHOST_REGDEBUG - Enable very low-level register access
+     debug.  Depends on CONFIG_DEBUG.
+   CONFIG_STM32_USBHOST_PKTDUMP - Dump all incoming and outgoing USB
+     packets. Depends on CONFIG_DEBUG.
+
+Configurations
+==============
+
+Each STM32F4Discovery configuration is maintained in a sub-directory and
+can be selected as follow:
+
+    cd tools
+    ./configure.sh STM32F4Discovery/<subdir>
+    cd -
+    . ./setenv.sh
+
+If this is a Windows native build, then configure.bat should be used
+instead of configure.sh:
+
+    configure.bat STM32F4Discovery\<subdir>
+
+Where <subdir> is one of the following:
+
+  cxxtest:
+  -------
+
+  The C++ standard libary test at apps/examples/cxxtest configuration.  This
+  test is used to verify the uClibc++ port to NuttX.  This configuration may
+  be selected as follows:
+
+    cd <nuttx-directory>/tools
+    ./configure.sh sim/cxxtest
+
+  NOTES:
+
+  1. Before you can use this example, you must first install the uClibc++
+     C++ library.  This is located outside of the NuttX source tree at
+     misc/uClibc++ in GIT.  See the README.txt file for instructions on
+     how to install uClibc++
+
+  2. This configuration uses the mconf-based configuration tool.  To
+     change this configuration using that tool, you should:
+
+     a. Build and install the kconfig-mconf tool.  See nuttx/README.txt
+        and misc/tools/
+
+     b. Execute 'make menuconfig' in nuttx/ in order to start the
+        reconfiguration process.
+
+  3. Ideally, you should build with a toolchain based on GLIBC or
+     uClibc++.  It you use a toolchain based on newlib, you may see
+     an error like the following:
+
+     .../lib/libsupc++.a(vterminate.o): In function `__gnu_cxx::__verbose_terminate_handler()':
+     vterminate.cc:(....): undefined reference to `_impure_ptr'
+
+     Here is a quick'n'dirty fix:
+
+     1. Get the directory where you can find libsupc++:
+
+        arm-none-eabi-gcc -mcpu=cortex-m4 -mthumb -print-file-name=libsupc++.a
+
+     2. Go to that directory and save a copy of vterminate.o (in case you
+        want to restore it later:
+
+        cd <the-directory-containing-libsupc++.a>
+        arm-none-eabi-ar.exe -x libsupc++.a vterminate.o
+
+     3. Then remove vterminate.o from the library.  At build time, the
+        uClibc++ package will provide a usable replacement vterminate.o.
+
+     Steps 2 and 3 will require root privileges on most systems (not Cygwin).
+
+     Now NuttX should link with no problem.  If you want to restore the
+     vterminate.o that you removed from libsupc++, you can do that with:
+
+       arm-none-eabi-ar.exe rcs libsupc++.a vterminate.o
+
+  4. Exceptions are enabled and workking (CONFIG_UCLIBCXX_EXCEPTIONS=y)
+
+  elf:
+  ---
+
+    This configuration uses apps/examples/elf in order to test the ELF
+    loader.
+
+    NOTES:
+
+    1. This configuration uses the mconf-based configuration tool.  To
+       change this configuration using that tool, you should:
+
+       a. Build and install the kconfig-mconf tool.  See nuttx/README.txt
+          and misc/tools/
+
+       b. Execute 'make menuconfig' in nuttx/ in order to start the
+          reconfiguration process.
+
+    2. Default platform/toolchain:
+
+       CONFIG_HOST_WINDOWS=y                   : Windows
+       CONFIG_WINDOWS_CYGWIN=y                 : Cygwin environment on Windows
+       CONFIG_ARMV7M_TOOLCHAIN_CODESOURCERYW=y : CodeSourcery under Windows
+
+    3. By default, this project assumes that you are *NOT* using the DFU
+       bootloader.
+
+    4. It appears that you cannot execute from CCM RAM.  This is why the
+       following definition appears in the defconfig file:
+
+       CONFIG_STM32_CCMEXCLUDE=y
+
+    5. This configuration requires that you have the genromfs tool installed
+       on your system and that you have the full path to the installed genromfs
+       executable in PATH variable (see apps/examples/README.txt)
+
+  kostest:
+  -------
+    This is identical to the ostest configuration below except that NuttX
+    is built as a kernel-mode, monolithic module and the user applications
+    are built separately.  Is is recommended to use a special make command;
+    not just 'make' but make with the following two arguments:
+
+        make pass1 pass2
+
+    In the normal case (just 'make'), make will attempt to build both user-
+    and kernel-mode blobs more or less interleaved.  This actual works!
+    However, for me it is very confusing so I prefer the above make command:
+    Make the user-space binaries first (pass1), then make the kernel-space
+    binaries (pass2)
+
+    NOTES:
+
+    1. This configuration uses the mconf-based configuration tool.  To
+       change this configuration using that tool, you should:
+
+       a. Build and install the kconfig-mconf tool.  See nuttx/README.txt
+          and misc/tools/
+
+       b. Execute 'make menuconfig' in nuttx/ in order to start the
+          reconfiguration process.
+
+    2. This is the default platform/toolchain in the configuration:
+
+       CONFIG_HOST_WINDOWS=y                   : Windows
+       CONFIG_WINDOWS_CYGWIN=y                 : Cygwin environment on Windows
+       CONFIG_ARMV7M_TOOLCHAIN_CODESOURCERYW=y : CodeSourcery under Windows
+
+       This is easily changed by modifying the configuration.
+
+    3. At the end of the build, there will be several files in the top-level
+       NuttX build directory:
+
+       PASS1:
+         nuttx_user.elf    - The pass1 user-space ELF file
+         nuttx_user.hex    - The pass1 Intel HEX format file (selected in defconfig)
+         User.map          - Symbols in the user-space ELF file
+
+       PASS2:
+         nuttx             - The pass2 kernel-space ELF file
+         nuttx.hex         - The pass2 Intel HEX file (selected in defconfig)
+         System.map        - Symbols in the kernel-space ELF file
+
+    4. Combining .hex files.  If you plan to use the STM32 ST-Link Utility to
+       load the .hex files into FLASH, then you need to combine the two hex
+       files into a single .hex file.  Here is how you can do that.
+
+       a. The 'tail' of the nuttx.hex file should look something like this
+          (with my comments added):
+
+            $ tail nuttx.hex
+            # 00, data records
+            ...
+            :10 9DC0 00 01000000000800006400020100001F0004
+            :10 9DD0 00 3B005A0078009700B500D400F300110151
+            :08 9DE0 00 30014E016D0100008D
+            # 05, Start Linear Address Record
+            :04 0000 05 0800 0419 D2
+            # 01, End Of File record
+            :00 0000 01 FF
+
+          Use an editor such as vi to remove the 05 and 01 records.
+
+       b. The 'head' of the nuttx_user.hex file should look something like
+          this (again with my comments added):
+
+            $ head nuttx_user.hex
+            # 04, Extended Linear Address Record
+            :02 0000 04 0801 F1
+            # 00, data records
+            :10 8000 00 BD89 01084C800108C8110208D01102087E
+            :10 8010 00 0010 00201C1000201C1000203C16002026
+            :10 8020 00 4D80 01085D80010869800108ED83010829
+            ...
+
+          Nothing needs to be done here.  The nuttx_user.hex file should
+          be fine.
+
+       c. Combine the edited nuttx.hex and un-edited nuttx_user.hex
+          file to produce a single combined hex file:
+
+          $ cat nuttx.hex nuttx_user.hex >combined.hex
+
+       Then use the combined.hex file with the STM32 ST-Link tool.  If
+       you do this a lot, you will probably want to invest a little time
+       to develop a tool to automate these steps.
+
+  netnsh:
+  ------
+    This is a special version of the NuttShell (nsh) configuration that is
+    tailored to work with the STM32F4DIS-BB base board.  This version
+    derives from nsh configuration so all of the notes apply there except as
+    noted below.
+
+    NOTES:
+
+    1. This example uses USART6 for the serial console.  The STM32F4DIS-BB
+       provides RS-232 drivers for USART6 and allows access via the DB9
+       connector on the base board.  USART6 is, therefore, the more
+       convenient UART to use for the serial console.
+
+    2. Networking is enabled.  The STM32F4DIS-BB has an SMC LAN2870 PHY
+       and RJ5 network connector.  Support is enabled for ICMP, TCP/IP,
+       UDP, and ARP.
+
+    3. SD card support is enabled.  The STM32F4DIS-BB has an on-board
+       microSD slot that should be automatically registered as the block
+       device /dev/mmcsd0 when an SD card is present.  The SD card can
+       then be mounted by the NSH command:
+
+       nsh> mount -t /dev/mmcsd0 /mnt/sdcard
+
+    4. CCM memory is not included in the heap in this configuration.  That
+       is because the SD card uses DMA and if DMA memory is allocated from
+       the CCM memory, the DMA will failure.  This is an STM32 hardware
+       limitation.
+
+       If you want to get the CCM memory back in the heap, then you can
+
+         a) Disable microSD support (and DMAC2 which is then no longer
+            needed).  If you reduce the clocking by a huge amount, it might
+            be possible to use microSD without DMA.  This, however, may
+            not be possible.
+         b) Develop a strategy to manage CCM memory and DMA memory.  Look
+            at this discussion on the NuttX Wiki:
+            http://www.nuttx.org/doku.php?id=wiki:howtos:stm32-ccm-alloc
+
+       To put the CCM memory back into the heap you would need to change
+       the following in the NuttX configuration:
+
+         CONFIG_STM32_CCMEXCLUDE=n  : Don't exclude CCM memory from the heap
+         CONFIG_MM_REGIONS=2        : With CCM, there will be two memory regions
+
+  nsh:
+  ---
+    Configures the NuttShell (nsh) located at apps/examples/nsh.  The
+    Configuration enables the serial interfaces on UART2.  Support for
+    builtin applications is enabled, but in the base configuration no
+    builtin applications are selected (see NOTES below).
+
+    NOTES:
+
+    1. This configuration uses the mconf-based configuration tool.  To
+       change this configuration using that tool, you should:
+
+       a. Build and install the kconfig-mconf tool.  See nuttx/README.txt
+          and misc/tools/
+
+       b. Execute 'make menuconfig' in nuttx/ in order to start the
+          reconfiguration process.
+
+    2. By default, this configuration uses the CodeSourcery toolchain
+       for Windows and builds under Cygwin (or probably MSYS).  That
+       can easily be reconfigured, of course.
+
+       CONFIG_HOST_WINDOWS=y                   : Builds under Windows
+       CONFIG_WINDOWS_CYGWIN=y                 : Using Cygwin
+       CONFIG_ARMV7M_TOOLCHAIN_CODESOURCERYW=y : CodeSourcery for Windows
+
+    3. This example supports the PWM test (apps/examples/pwm) but this must
+       be manually enabled by selecting:
+
+       CONFIG_PWM=y              : Enable the generic PWM infrastructure
+       CONFIG_STM32_TIM4=y       : Enable TIM4
+       CONFIG_STM32_TIM4_PWM=y   : Use TIM4 to generate PWM output
+
+       See also apps/examples/README.txt
+
+       Special PWM-only debug options:
+
+       CONFIG_DEBUG_PWM
+
+    5. This example supports the Quadrature Encode test (apps/examples/qencoder)
+       but this must be manually enabled by selecting:
+
+       CONFIG_EXAMPLES_QENCODER=y : Enable the apps/examples/qencoder
+       CONFIG_SENSORS=y           : Enable support for sensors
+       CONFIG_QENCODER=y          : Enable the generic Quadrature Encoder infrastructure
+       CONFIG_STM32_TIM8=y        : Enable TIM8
+       CONFIG_STM32_TIM2=n        : (Or optionally TIM2)
+       CONFIG_STM32_TIM8_QE=y     : Use TIM8 as the quadrature encoder
+       CONFIG_STM32_TIM2_QE=y     : (Or optionally TIM2)
+
+       See also apps/examples/README.tx. Special PWM-only debug options:
+
+       CONFIG_DEBUG_QENCODER
+
+    6. This example supports the watchdog timer test (apps/examples/watchdog)
+       but this must be manually enabled by selecting:
+
+       CONFIG_EXAMPLES_WATCHDOG=y : Enable the apps/examples/watchdog
+       CONFIG_WATCHDOG=y          : Enables watchdog timer driver support
+       CONFIG_STM32_WWDG=y        : Enables the WWDG timer facility, OR
+       CONFIG_STM32_IWDG=y        : Enables the IWDG timer facility (but not both)
+
+       The WWDG watchdog is driven off the (fast) 42MHz PCLK1 and, as result,
+       has a maximum timeout value of 49 milliseconds.  for WWDG watchdog, you
+       should also add the fillowing to the configuration file:
+
+       CONFIG_EXAMPLES_WATCHDOG_PINGDELAY=20
+       CONFIG_EXAMPLES_WATCHDOG_TIMEOUT=49
+
+       The IWDG timer has a range of about 35 seconds and should not be an issue.
+
+     7. USB Support (CDC/ACM device)
+
+        CONFIG_STM32_OTGFS=y          : STM32 OTG FS support
+        CONFIG_USBDEV=y               : USB device support must be enabled
+        CONFIG_CDCACM=y               : The CDC/ACM driver must be built
+        CONFIG_NSH_BUILTIN_APPS=y     : NSH built-in application support must be enabled
+        CONFIG_NSH_ARCHINIT=y         : To perform USB initialization
+
+     8. Using the USB console.
+
+        The STM32F4Discovery NSH configuration can be set up to use a USB CDC/ACM
+        (or PL2303) USB console.  The normal way that you would configure the
+        the USB console would be to change the .config file like this:
+
+        CONFIG_STM32_OTGFS=y           : STM32 OTG FS support
+        CONFIG_USART2_SERIAL_CONSOLE=n : Disable the USART2 console
+        CONFIG_DEV_CONSOLE=n           : Inhibit use of /dev/console by other logic
+        CONFIG_USBDEV=y                : USB device support must be enabled
+        CONFIG_CDCACM=y                : The CDC/ACM driver must be built
+        CONFIG_CDCACM_CONSOLE=y        : Enable the CDC/ACM USB console.
+
+        NOTE: When you first start the USB console, you have hit ENTER a few
+        times before NSH starts.  The logic does this to prevent sending USB data
+        before there is anything on the host side listening for USB serial input.
+
+    9.  Here is an alternative USB console configuration.  The following
+        configuration will also create a NSH USB console but this version
+        will use /dev/console.  Instead, it will use the normal /dev/ttyACM0
+        USB serial device for the console:
+
+        CONFIG_STM32_OTGFS=y           : STM32 OTG FS support
+        CONFIG_USART2_SERIAL_CONSOLE=y : Keep the USART2 console
+        CONFIG_DEV_CONSOLE=y           : /dev/console exists (but NSH won't use it)
+        CONFIG_USBDEV=y                : USB device support must be enabled
+        CONFIG_CDCACM=y                : The CDC/ACM driver must be built
+        CONFIG_CDCACM_CONSOLE=n        : Don't use the CDC/ACM USB console.
+        CONFIG_NSH_USBCONSOLE=y        : Instead use some other USB device for the console
+
+        The particular USB device that is used is:
+
+        CONFIG_NSH_USBCONDEV="/dev/ttyACM0"
+
+        The advantage of this configuration is only that it is easier to
+        bet working.  This alternative does has some side effects:
+
+        - When any other device other than /dev/console is used for a user
+          interface, linefeeds (\n) will not be expanded to carriage return /
+          linefeeds (\r\n).  You will need to set your terminal program to account
+          for this.
+
+        - /dev/console still exists and still refers to the serial port. So
+          you can still use certain kinds of debug output (see include/debug.h, all
+          of the interfaces based on lowsyslog will work in this configuration).
+
+        - But don't enable USB debug output!  Since USB is console is used for
+          USB debug output and you are using a USB console, there will be
+          infinite loops and deadlocks:  Debug output generates USB debug
+          output which generatates USB debug output, etc.  If you want USB
+          debug output, you should consider enabling USB trace
+          (CONFIG_USBDEV_TRACE) and perhaps the USB monitor (CONFIG_SYSTEM_USBMONITOR).
+
+          See the usbnsh configuration below for more information on configuring
+          USB trace output and the USB monitor.
+
+   10. USB OTG FS Host Support.  The following changes will enable support for
+       a USB host on the STM32F4Discovery, including support for a mass storage
+       class driver:
+
+       CONFIG_USBDEV=n          : Make sure tht USB device support is disabled
+       CONFIG_USBHOST=y         : Enable USB host support
+       CONFIG_STM32_OTGFS=y     : Enable the STM32 USB OTG FS block
+       CONFIG_STM32_SYSCFG=y    : Needed for all USB OTF FS support
+       CONFIG_SCHED_WORKQUEUE=y : Worker thread support is required for the mass
+                                  storage class driver.
+       CONFIG_NSH_ARCHINIT=y    : Architecture specific USB initialization
+                                  is needed for NSH
+       CONFIG_FS_FAT=y          : Needed by the USB host mass storage class.
+
+       With those changes, you can use NSH with a FLASH pen driver as shown
+       belong.  Here NSH is started with nothing in the USB host slot:
+
+       NuttShell (NSH) NuttX-x.yy
+       nsh> ls /dev
+       /dev:
+        console
+        null
+        ttyS0
+
+       After inserting the FLASH drive, the /dev/sda appears and can be
+       mounted like this:
+
+       nsh> ls /dev
+       /dev:
+        console
+        null
+        sda
+        ttyS0
+       nsh> mount -t vfat /dev/sda /mnt/stuff
+       nsh> ls /mnt/stuff
+       /mnt/stuff:
+        -rw-rw-rw-   16236 filea.c
+
+       And files on the FLASH can be manipulated to standard interfaces:
+
+       nsh> echo "This is a test" >/mnt/stuff/atest.txt
+       nsh> ls /mnt/stuff
+       /mnt/stuff:
+        -rw-rw-rw-   16236 filea.c
+        -rw-rw-rw-      16 atest.txt
+       nsh> cat /mnt/stuff/atest.txt
+       This is a test
+       nsh> cp /mnt/stuff/filea.c fileb.c
+       nsh> ls /mnt/stuff
+       /mnt/stuff:
+        -rw-rw-rw-   16236 filea.c
+        -rw-rw-rw-      16 atest.txt
+        -rw-rw-rw-   16236 fileb.c
+
+       To prevent data loss, don't forget to un-mount the FLASH drive
+       before removing it:
+
+       nsh> umount /mnt/stuff
+
+  nxlines:
+  ------
+    An example using the NuttX graphics system (NX).   This example focuses on
+    placing lines on the background in various orientations.
+
+      CONFIG_ARMV7M_TOOLCHAIN_CODESOURCERYW=y : CodeSourcery under Windows
+      CONFIG_LCD_LANDSCAPE=y                  : 320x240 landscape orientation
+
+    The STM32F4Discovery board does not have any graphics capability.  This
+    configuration assumes that you have connected an SD1289-based LCD as
+    described above under "SSD1289".  NOTE:  At present, it has not been
+    proven that the STM32F4Discovery can actually drive an LCD.  There are
+    some issues with how some of the dedicated FSMC pins are used on the
+    boards.  This configuration may not be useful and may only serve as
+    an illustration of how to build for th SSD1289 LCD.
+
+  NOTES:
+
+  1. As of this writing, I have not seen the LCD work!
+
+  2. This configuration uses the mconf-based configuration tool.  To
+     change this configuration using that tool, you should:
+
+     a. Build and install the kconfig-mconf tool.  See nuttx/README.txt
+        and misc/tools/
+
+     b. Execute 'make menuconfig' in nuttx/ in order to start the
+        reconfiguration process.
+
+  3. This configured can be re-configured to use either the
+     UG-2864AMBAG01 or UG-2864HSWEG01 0.96 inch OLEDs by adding
+     or changing the following items in the configuration (using
+     'make menuconfig'):
+
+     +CONFIG_SPI_CMDDATA=y
+
+     -CONFIG_LCD_MAXCONTRAST=1
+     -CONFIG_LCD_MAXPOWER=255
+     +CONFIG_LCD_MAXCONTRAST=255
+     +CONFIG_LCD_MAXPOWER=1
+
+     -CONFIG_LCD_SSD1289=y
+     -CONFIG_SSD1289_PROFILE1=y
+     +CONFIG_LCD_UG2864AMBAG01=y              : For the UG-2964AMBAG01
+     +CONFIG_UG2864AMBAG01_SPIMODE=3
+     +CONFIG_UG2864AMBAG01_FREQUENCY=3500000
+     +CONFIG_UG2864AMBAG01_NINTERFACES=1
+
+     -CONFIG_NX_DISABLE_1BPP=y
+     +CONFIG_NX_DISABLE_16BPP=y
+
+     -CONFIG_EXAMPLES_NXLINES_BGCOLOR=0x0320
+     -CONFIG_EXAMPLES_NXLINES_LINEWIDTH=16
+     -CONFIG_EXAMPLES_NXLINES_LINECOLOR=0xffe0
+     -CONFIG_EXAMPLES_NXLINES_BORDERWIDTH=4
+     -CONFIG_EXAMPLES_NXLINES_BORDERCOLOR=0xffe0
+     -CONFIG_EXAMPLES_NXLINES_CIRCLECOLOR=0xf7bb
+     -CONFIG_EXAMPLES_NXLINES_BPP=16
+     +CONFIG_EXAMPLES_NXLINES_BGCOLOR=0x00
+     +CONFIG_EXAMPLES_NXLINES_LINEWIDTH=4
+     +CONFIG_EXAMPLES_NXLINES_LINECOLOR=0x01
+     +CONFIG_EXAMPLES_NXLINES_BORDERWIDTH=2
+     +CONFIG_EXAMPLES_NXLINES_BORDERCOLOR=0x01
+     +CONFIG_EXAMPLES_NXLINES_CIRCLECOLOR=0x00
+     +CONFIG_EXAMPLES_NXLINES_BPP=1
+     +CONFIG_EXAMPLES_NXLINES_EXTERNINIT=y
+
+     There are some issues with with the presentation... some tuning of the
+     configuration could fix that.  Lower resolution displays are also more
+     subject to the "fat, flat line bug" that I need to fix someday.  See
+     http://www.nuttx.org/doku.php?id=wiki:graphics:nxgraphics for a description
+     of the fat, flat line bug.
+
+  pm:
+  --
+    This is a configuration that is used to test STM32 power management, i.e.,
+    to test that the board can go into lower and lower states of power usage
+    as a result of inactivity.  This configuration is based on the nsh2
+    configuration with modifications for testing power management.  This
+    configuration should provide some guidelines for power management in your
+    STM32 application.
+
+    NOTES:
+
+    1. This configuration uses the mconf-based configuration tool.  To
+       change this configuration using that tool, you should:
+
+       a. Build and install the kconfig-mconf tool.  See nuttx/README.txt
+          and misc/tools/
+
+       b. Execute 'make menuconfig' in nuttx/ in order to start the
+          reconfiguration process.
+
+    2. Default configuration is Cygwin under windows using the CodeSourcery
+       toolchain:
+
+         CONFIG_HOST_WINDOWS=y                   : Windows
+         CONFIG_WINDOWS_CYGWIN=y                 : Cygwin
+         CONFIG_ARMV7M_TOOLCHAIN_CODESOURCERYW=y : CodeSourcery under Windows
+
+    3. CONFIG_ARCH_CUSTOM_PMINIT and CONFIG_ARCH_IDLE_CUSTOM are necessary
+       parts of the PM configuration:
+
+         CONFIG_ARCH_CUSTOM_PMINIT=y
+
+       CONFIG_ARCH_CUSTOM_PMINIT moves the PM initialization from
+       arch/arm/src/stm32/stm32_pminitialiaze.c to configs/stm3210-eval/src/stm32_pm.c.
+       This allows us to support board-specific PM initialization.
+
+         CONFIG_ARCH_IDLE_CUSTOM=y
+
+       The bulk of the PM activities occur in the IDLE loop.  The IDLE loop
+       is special because it is what runs when there is no other task running.
+       Therefore when the IDLE executes, we can be assure that nothing else
+       is going on; this is the ideal condition for doing reduced power
+       management.
+
+       The configuration CONFIG_ARCH_IDLE_CUSTOM allows us to "steal" the
+       normal STM32 IDLE loop (of arch/arm/src/stm32/stm32_idle.c) and replace
+       this with our own custom IDLE loop (at configs/stm3210-eval/src/up_idle.c).
+
+    4. Here are some additional things to note in the configuration:
+
+        CONFIG_PM_BUTTONS=y
+
+       CONFIG_PM_BUTTONS enables button support for PM testing.  Buttons can
+       drive EXTI interrupts and EXTI interrupts can be used to wakeup for
+       certain reduced power modes (STOP mode).  The use of the buttons here
+       is for PM testing purposes only; buttons would normally be part the
+       application code and CONFIG_PM_BUTTONS would not be defined.
+
+         CONFIG_RTC_ALARM=y
+
+       The RTC alarm is used to wake up from STOP mode and to transition to
+       STANDBY mode.  This used of the RTC alarm could conflict with other
+       uses of the RTC alarm in your application.
+
+  posix_spawn:
+  ------------
+    This configuration directory, performs a simple test os the posix_spawn
+    interface using apps/examples/posix_spawn.
+
+    NOTES:
+
+    1. This configuration uses the mconf-based configuration tool.  To
+       change this configuration using that tool, you should:
+
+       a. Build and install the kconfig-mconf tool.  See nuttx/README.txt
+          and misc/tools/
+
+       b. Execute 'make menuconfig' in nuttx/ in order to start the
+          reconfiguration process.
+
+    2. Default toolchain:
+
+       CONFIG_HOST_WINDOWS=y                   : Builds under windows
+       CONFIG_WINDOWS_CYGWIN=y                 : Using Cygwin and
+       CONFIG_ARMV7M_TOOLCHAIN_CODESOURCERYW=y : The native Windows CodeSourcery toolchain
+
+    3. By default, this project assumes that you are *NOT* using the DFU
+       bootloader.
+
+  usbnsh:
+  -------
+
+    This is another NSH example.  If differs from other 'nsh' configurations
+    in that this configurations uses a USB serial device for console I/O.
+    Such a configuration is useful on the stm32f4discovery which has no
+    builtin RS-232 drivers.
+
+    NOTES:
+
+    1. This configuration uses the mconf-based configuration tool.  To
+       change this configuration using that tool, you should:
+
+       a. Build and install the kconfig-mconf tool.  See nuttx/README.txt
+          and misc/tools/
+
+       b. Execute 'make menuconfig' in nuttx/ in order to start the
+          reconfiguration process.
+
+    2. By default, this configuration uses the CodeSourcery toolchain
+       for Windows and builds under Cygwin (or probably MSYS).  That
+       can easily be reconfigured, of course.
+
+       CONFIG_HOST_WINDOWS=y                   : Builds under Windows
+       CONFIG_WINDOWS_CYGWIN=y                 : Using Cygwin
+       CONFIG_ARMV7M_TOOLCHAIN_CODESOURCERYW=y : CodeSourcery for Windows
+
+    3. This configuration does have UART2 output enabled and set up as
+       the system logging device:
+
+       CONFIG_SYSLOG=y                    : Enable output to syslog, not console
+       CONFIG_SYSLOG_CHAR=y               : Use a character device for system logging
+       CONFIG_SYSLOG_DEVPATH="/dev/ttyS0" : UART2 will be /dev/ttyS0
+
+       However, there is nothing to generate SYLOG output in the default
+       configuration so nothing should appear on UART2 unless you enable
+       some debug output or enable the USB monitor.
+
+       NOTE:  Using the SYSLOG to get debug output has limitations.  Among
+       those are that you cannot get debug output from interrupt handlers.
+       So, in particularly, debug output is not a useful way to debug the
+       USB device controller driver.  Instead, use the USB monitor with
+       USB debug off and USB trace on (see below).
+
+    4. Enabling USB monitor SYSLOG output.  If tracing is enabled, the USB
+       device will save encoded trace output in in-memory buffer; if the
+       USB monitor is enabled, that trace buffer will be periodically
+       emptied and dumped to the system logging device (UART2 in this
+       configuration):
+
+       CONFIG_USBDEV_TRACE=y                   : Enable USB trace feature
+       CONFIG_USBDEV_TRACE_NRECORDS=128        : Buffer 128 records in memory
+       CONFIG_NSH_USBDEV_TRACE=n               : No builtin tracing from NSH
+       CONFIG_NSH_ARCHINIT=y                   : Automatically start the USB monitor
+       CONFIG_SYSTEM_USBMONITOR=y              : Enable the USB monitor daemon
+       CONFIG_SYSTEM_USBMONITOR_STACKSIZE=2048 : USB monitor daemon stack size
+       CONFIG_SYSTEM_USBMONITOR_PRIORITY=50    : USB monitor daemon priority
+       CONFIG_SYSTEM_USBMONITOR_INTERVAL=2     : Dump trace data every 2 seconds
+
+       CONFIG_SYSTEM_USBMONITOR_TRACEINIT=y    : Enable TRACE output
+       CONFIG_SYSTEM_USBMONITOR_TRACECLASS=y
+       CONFIG_SYSTEM_USBMONITOR_TRACETRANSFERS=y
+       CONFIG_SYSTEM_USBMONITOR_TRACECONTROLLER=y
+       CONFIG_SYSTEM_USBMONITOR_TRACEINTERRUPTS=y
+
+    5. By default, this project assumes that you are *NOT* using the DFU
+       bootloader.
+
+    Using the Prolifics PL2303 Emulation
+    ------------------------------------
+    You could also use the non-standard PL2303 serial device instead of
+    the standard CDC/ACM serial device by changing:
+
+      CONFIG_CDCACM=n               : Disable the CDC/ACM serial device class
+      CONFIG_CDCACM_CONSOLE=n       : The CDC/ACM serial device is NOT the console
+      CONFIG_PL2303=y               : The Prolifics PL2303 emulation is enabled
+      CONFIG_PL2303_CONSOLE=y       : The PL2303 serial device is the console
+
+  winbuild:
+  --------
+
+    This is a version of the apps/example/ostest, but configure to build natively
+    in the Windows CMD shell.
+
+    NOTES:
+
+    1. The beginnings of a Windows native build are in place but still not full
+       usable as of this writing.  The windows native build logic is currently
+       separate and must be started by:
+
+        make -f Makefile.win
+
+      This build:
+
+        - Uses all Windows style paths
+        - Uses primarily Windows batch commands from cmd.exe, with
+        - A few extensions from GNUWin32 (or MSYS is you prefer)
+
+      In this build, you cannot use a Cygwin or MSYS shell. Rather the build must
+      be performed in a Windows console. Here is a better shell than than the
+      standard issue, CMD.exe shell:  ConEmu which can be downloaded from:
+      http://code.google.com/p/conemu-maximus5/
+
+       CONFIG_HOST_WINDOWS=y                   : Windows
+       CONFIG_WINDOWS_NATIVE=y                 : Native Windows environment
+       CONFIG_ARMV7M_TOOLCHAIN_CODESOURCERYW=y : CodeSourcery under Windows
+
+      Build Tools.  The build still relies on some Unix-like commands.  I use
+      the GNUWin32 tools that can be downloaded from http://gnuwin32.sourceforge.net/.
+      The MSYS tools are probably also a option but are likely lower performance
+      since they are based on Cygwin 1.3.
+
+      Host Compiler:  I use the MingGW compiler which can be downloaded from
+      http://www.mingw.org/.  If you are using GNUWin32, then it is recommended
+      the you not install the optional MSYS components as there may be conflicts.
diff --git a/nuttx/configs/px4fmu-v2/cxxtest/Make.defs b/nuttx/configs/px4fmu-v2/cxxtest/Make.defs
new file mode 100644
index 000000000..85608244e
--- /dev/null
+++ b/nuttx/configs/px4fmu-v2/cxxtest/Make.defs
@@ -0,0 +1,120 @@
+############################################################################
+# configs/stm32f4discovery/cxxtest/Make.defs
+#
+#   Copyright (C) 2012 Gregory Nutt. All rights reserved.
+#   Author: Gregory Nutt <gnutt@nuttx.org>
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions
+# are met:
+#
+# 1. Redistributions of source code must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+# 2. Redistributions in binary form must reproduce the above copyright
+#    notice, this list of conditions and the following disclaimer in
+#    the documentation and/or other materials provided with the
+#    distribution.
+# 3. Neither the name NuttX nor the names of its contributors may be
+#    used to endorse or promote products derived from this software
+#    without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+#
+############################################################################
+
+include ${TOPDIR}/.config
+include ${TOPDIR}/tools/Config.mk
+include ${TOPDIR}/arch/arm/src/armv7-m/Toolchain.defs
+
+CC = $(CROSSDEV)gcc
+CXX = $(CROSSDEV)g++
+CPP = $(CROSSDEV)gcc -E
+LD = $(CROSSDEV)ld
+AR = $(ARCROSSDEV)ar rcs
+NM = $(ARCROSSDEV)nm
+OBJCOPY = $(CROSSDEV)objcopy
+OBJDUMP = $(CROSSDEV)objdump
+
+ARCHCCVERSION = ${shell $(CC) -v 2>&1 | sed -n '/^gcc version/p' | sed -e 's/^gcc version \([0-9\.]\)/\1/g' -e 's/[-\ ].*//g' -e '1q'}
+ARCHCCMAJOR = ${shell echo $(ARCHCCVERSION) | cut -d'.' -f1}
+
+LDSCRIPT = ld.script
+LIBSUPXX = ${shell $(CC) $(CXXFLAGS) --print-file-name=libsupc++.a}
+EXTRA_LIBPATHS = -L "${shell dirname "$(LIBSUPXX)"}"
+EXTRA_LIBS = -lsupc++
+
+ifeq ($(WINTOOL),y)
+  # Windows-native toolchains
+  DIRLINK = $(TOPDIR)/tools/copydir.sh
+  DIRUNLINK = $(TOPDIR)/tools/unlink.sh
+  MKDEP = $(TOPDIR)/tools/mknulldeps.sh
+  ARCHINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}"
+  ARCHXXINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}" \
+    -isystem "${shell cygpath -w $(TOPDIR)/include/cxx}" \
+    -isystem "${shell cygpath -w $(TOPDIR)/include/uClibc++}"
+  ARCHSCRIPT = -T "${shell cygpath -w $(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/scripts/$(LDSCRIPT)}"
+else
+  # Linux/Cygwin-native toolchain
+  MKDEP = $(TOPDIR)/tools/mkdeps.sh
+  ARCHINCLUDES = -I. -isystem $(TOPDIR)/include
+  ARCHXXINCLUDES = -I. -isystem $(TOPDIR)/include \
+    -isystem $(TOPDIR)/include/cxx -isystem $(TOPDIR)/include/uClibc++
+  ARCHSCRIPT = -T$(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/scripts/$(LDSCRIPT)
+endif
+
+ifeq ($(CONFIG_DEBUG_SYMBOLS),y)
+  ARCHOPTIMIZATION = -g
+endif
+
+ifneq ($(CONFIG_DEBUG_NOOPT),y)
+  ARCHOPTIMIZATION += $(MAXOPTIMIZATION) -fno-strict-aliasing -fno-strength-reduce -fomit-frame-pointer
+endif
+
+ARCHCFLAGS = -fno-builtin
+ifeq ($(CONFIG_UCLIBCXX_EXCEPTION),y)
+  ARCHCPUFLAGSXX = -fno-builtin
+else
+  ARCHCPUFLAGSXX = -fno-builtin -fno-exceptions
+endif
+ARCHWARNINGS = -Wall -Wstrict-prototypes -Wshadow
+ARCHWARNINGSXX = -Wall -Wshadow
+ARCHDEFINES =
+ARCHPICFLAGS = -fpic -msingle-pic-base -mpic-register=r10
+
+CFLAGS = $(ARCHCFLAGS) $(ARCHWARNINGS) $(ARCHOPTIMIZATION) $(ARCHCPUFLAGS) $(ARCHINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES) -pipe
+CPICFLAGS = $(ARCHPICFLAGS) $(CFLAGS)
+CXXFLAGS = $(ARCHCXXFLAGS) $(ARCHWARNINGSXX) $(ARCHOPTIMIZATION) $(ARCHCPUFLAGS) $(ARCHXXINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES) -pipe
+CXXPICFLAGS = $(ARCHPICFLAGS) $(CXXFLAGS)
+CPPFLAGS = $(ARCHINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES)
+AFLAGS = $(CFLAGS) -D__ASSEMBLY__
+
+NXFLATLDFLAGS1 = -r -d -warn-common
+NXFLATLDFLAGS2 = $(NXFLATLDFLAGS1) -T$(TOPDIR)/binfmt/libnxflat/gnu-nxflat-pcrel.ld -no-check-sections
+LDNXFLATFLAGS = -e main -s 2048
+
+OBJEXT = .o
+LIBEXT = .a
+EXEEXT =
+
+ifneq ($(CROSSDEV),arm-nuttx-elf-)
+  LDFLAGS += -nostartfiles -nodefaultlibs
+endif
+ifeq ($(CONFIG_DEBUG_SYMBOLS),y)
+  LDFLAGS += -g
+endif
+
+HOSTCC = gcc
+HOSTINCLUDES = -I.
+HOSTCFLAGS = -Wall -Wstrict-prototypes -Wshadow -g -pipe
+HOSTLDFLAGS =
diff --git a/nuttx/configs/px4fmu-v2/cxxtest/defconfig b/nuttx/configs/px4fmu-v2/cxxtest/defconfig
new file mode 100644
index 000000000..c0c73d0dc
--- /dev/null
+++ b/nuttx/configs/px4fmu-v2/cxxtest/defconfig
@@ -0,0 +1,841 @@
+#
+# Automatically generated file; DO NOT EDIT.
+# Nuttx/ Configuration
+#
+
+#
+# Build Setup
+#
+# CONFIG_EXPERIMENTAL is not set
+# CONFIG_DEFAULT_SMALL is not set
+# CONFIG_HOST_LINUX is not set
+# CONFIG_HOST_OSX is not set
+CONFIG_HOST_WINDOWS=y
+# CONFIG_HOST_OTHER is not set
+# CONFIG_WINDOWS_NATIVE is not set
+CONFIG_WINDOWS_CYGWIN=y
+# CONFIG_WINDOWS_MSYS is not set
+# CONFIG_WINDOWS_OTHER is not set
+
+#
+# Build Configuration
+#
+# CONFIG_APPS_DIR="../apps"
+# CONFIG_BUILD_2PASS is not set
+
+#
+# Binary Output Formats
+#
+# CONFIG_RRLOAD_BINARY is not set
+CONFIG_INTELHEX_BINARY=y
+# CONFIG_MOTOROLA_SREC is not set
+CONFIG_RAW_BINARY=y
+
+#
+# Customize Header Files
+#
+# CONFIG_ARCH_STDINT_H is not set
+# CONFIG_ARCH_STDBOOL_H is not set
+# CONFIG_ARCH_MATH_H is not set
+CONFIG_ARCH_FLOAT_H=y
+# CONFIG_ARCH_STDARG_H is not set
+
+#
+# Debug Options
+#
+# CONFIG_DEBUG is not set
+CONFIG_ARCH_HAVE_STACKCHECK=y
+CONFIG_ARCH_HAVE_HEAPCHECK=y
+# CONFIG_DEBUG_SYMBOLS is not set
+CONFIG_ARCH_HAVE_CUSTOMOPT=y
+# CONFIG_DEBUG_NOOPT is not set
+# CONFIG_DEBUG_CUSTOMOPT is not set
+CONFIG_DEBUG_FULLOPT=y
+
+#
+# System Type
+#
+CONFIG_ARCH_ARM=y
+# CONFIG_ARCH_AVR is not set
+# CONFIG_ARCH_HC is not set
+# CONFIG_ARCH_MIPS is not set
+# CONFIG_ARCH_RGMP is not set
+# CONFIG_ARCH_SH is not set
+# CONFIG_ARCH_SIM is not set
+# CONFIG_ARCH_X86 is not set
+# CONFIG_ARCH_Z16 is not set
+# CONFIG_ARCH_Z80 is not set
+CONFIG_ARCH="arm"
+
+#
+# ARM Options
+#
+# CONFIG_ARCH_CHIP_A1X is not set
+# CONFIG_ARCH_CHIP_C5471 is not set
+# CONFIG_ARCH_CHIP_CALYPSO is not set
+# CONFIG_ARCH_CHIP_DM320 is not set
+# CONFIG_ARCH_CHIP_IMX is not set
+# CONFIG_ARCH_CHIP_KINETIS is not set
+# CONFIG_ARCH_CHIP_KL is not set
+# CONFIG_ARCH_CHIP_LM is not set
+# CONFIG_ARCH_CHIP_LPC17XX is not set
+# CONFIG_ARCH_CHIP_LPC214X is not set
+# CONFIG_ARCH_CHIP_LPC2378 is not set
+# CONFIG_ARCH_CHIP_LPC31XX is not set
+# CONFIG_ARCH_CHIP_LPC43XX is not set
+# CONFIG_ARCH_CHIP_NUC1XX is not set
+# CONFIG_ARCH_CHIP_SAMA5 is not set
+# CONFIG_ARCH_CHIP_SAMD is not set
+# CONFIG_ARCH_CHIP_SAM34 is not set
+CONFIG_ARCH_CHIP_STM32=y
+# CONFIG_ARCH_CHIP_STR71X is not set
+# CONFIG_ARCH_ARM7TDMI is not set
+# CONFIG_ARCH_ARM926EJS is not set
+# CONFIG_ARCH_ARM920T is not set
+# CONFIG_ARCH_CORTEXM0 is not set
+# CONFIG_ARCH_CORTEXM3 is not set
+CONFIG_ARCH_CORTEXM4=y
+# CONFIG_ARCH_CORTEXA5 is not set
+# CONFIG_ARCH_CORTEXA8 is not set
+CONFIG_ARCH_FAMILY="armv7-m"
+CONFIG_ARCH_CHIP="stm32"
+# CONFIG_ARMV7M_USEBASEPRI is not set
+CONFIG_ARCH_HAVE_CMNVECTOR=y
+# CONFIG_ARMV7M_CMNVECTOR is not set
+CONFIG_ARCH_HAVE_FPU=y
+# CONFIG_ARCH_FPU is not set
+CONFIG_ARCH_HAVE_MPU=y
+# CONFIG_ARMV7M_MPU is not set
+
+#
+# ARMV7M Configuration Options
+#
+# CONFIG_ARMV7M_TOOLCHAIN_ATOLLIC is not set
+# CONFIG_ARMV7M_TOOLCHAIN_BUILDROOT is not set
+# CONFIG_ARMV7M_TOOLCHAIN_CODEREDW is not set
+CONFIG_ARMV7M_TOOLCHAIN_CODESOURCERYW=y
+# CONFIG_ARMV7M_TOOLCHAIN_DEVKITARM is not set
+# CONFIG_ARMV7M_TOOLCHAIN_GNU_EABIL is not set
+# CONFIG_ARMV7M_TOOLCHAIN_GNU_EABIW is not set
+# CONFIG_ARMV7M_TOOLCHAIN_RAISONANCE is not set
+# CONFIG_SERIAL_TERMIOS is not set
+
+#
+# STM32 Configuration Options
+#
+# CONFIG_ARCH_CHIP_STM32L151C6 is not set
+# CONFIG_ARCH_CHIP_STM32L151C8 is not set
+# CONFIG_ARCH_CHIP_STM32L151CB is not set
+# CONFIG_ARCH_CHIP_STM32L151R6 is not set
+# CONFIG_ARCH_CHIP_STM32L151R8 is not set
+# CONFIG_ARCH_CHIP_STM32L151RB is not set
+# CONFIG_ARCH_CHIP_STM32L151V6 is not set
+# CONFIG_ARCH_CHIP_STM32L151V8 is not set
+# CONFIG_ARCH_CHIP_STM32L151VB is not set
+# CONFIG_ARCH_CHIP_STM32L152C6 is not set
+# CONFIG_ARCH_CHIP_STM32L152C8 is not set
+# CONFIG_ARCH_CHIP_STM32L152CB is not set
+# CONFIG_ARCH_CHIP_STM32L152R6 is not set
+# CONFIG_ARCH_CHIP_STM32L152R8 is not set
+# CONFIG_ARCH_CHIP_STM32L152RB is not set
+# CONFIG_ARCH_CHIP_STM32L152V6 is not set
+# CONFIG_ARCH_CHIP_STM32L152V8 is not set
+# CONFIG_ARCH_CHIP_STM32L152VB is not set
+# CONFIG_ARCH_CHIP_STM32F100C8 is not set
+# CONFIG_ARCH_CHIP_STM32F100CB is not set
+# CONFIG_ARCH_CHIP_STM32F100R8 is not set
+# CONFIG_ARCH_CHIP_STM32F100RB is not set
+# CONFIG_ARCH_CHIP_STM32F100RC is not set
+# CONFIG_ARCH_CHIP_STM32F100RD is not set
+# CONFIG_ARCH_CHIP_STM32F100RE is not set
+# CONFIG_ARCH_CHIP_STM32F100V8 is not set
+# CONFIG_ARCH_CHIP_STM32F100VB is not set
+# CONFIG_ARCH_CHIP_STM32F100VC is not set
+# CONFIG_ARCH_CHIP_STM32F100VD is not set
+# CONFIG_ARCH_CHIP_STM32F100VE is not set
+# CONFIG_ARCH_CHIP_STM32F103C4 is not set
+# CONFIG_ARCH_CHIP_STM32F103C8 is not set
+# CONFIG_ARCH_CHIP_STM32F103T8 is not set
+# CONFIG_ARCH_CHIP_STM32F103TB is not set
+# CONFIG_ARCH_CHIP_STM32F103CB is not set
+# CONFIG_ARCH_CHIP_STM32F103R8 is not set
+# CONFIG_ARCH_CHIP_STM32F103RB is not set
+# CONFIG_ARCH_CHIP_STM32F103V8 is not set
+# CONFIG_ARCH_CHIP_STM32F103VB is not set
+# CONFIG_ARCH_CHIP_STM32F103RE is not set
+# CONFIG_ARCH_CHIP_STM32F103VC is not set
+# CONFIG_ARCH_CHIP_STM32F103VE is not set
+# CONFIG_ARCH_CHIP_STM32F103ZE is not set
+# CONFIG_ARCH_CHIP_STM32F105VB is not set
+# CONFIG_ARCH_CHIP_STM32F107VC is not set
+# CONFIG_ARCH_CHIP_STM32F207IG is not set
+# CONFIG_ARCH_CHIP_STM32F207ZE is not set
+# CONFIG_ARCH_CHIP_STM32F302CB is not set
+# CONFIG_ARCH_CHIP_STM32F302CC is not set
+# CONFIG_ARCH_CHIP_STM32F302RB is not set
+# CONFIG_ARCH_CHIP_STM32F302RC is not set
+# CONFIG_ARCH_CHIP_STM32F302VB is not set
+# CONFIG_ARCH_CHIP_STM32F302VC is not set
+# CONFIG_ARCH_CHIP_STM32F303CB is not set
+# CONFIG_ARCH_CHIP_STM32F303CC is not set
+# CONFIG_ARCH_CHIP_STM32F303RB is not set
+# CONFIG_ARCH_CHIP_STM32F303RC is not set
+# CONFIG_ARCH_CHIP_STM32F303VB is not set
+# CONFIG_ARCH_CHIP_STM32F303VC is not set
+# CONFIG_ARCH_CHIP_STM32F405RG is not set
+# CONFIG_ARCH_CHIP_STM32F405VG is not set
+# CONFIG_ARCH_CHIP_STM32F405ZG is not set
+# CONFIG_ARCH_CHIP_STM32F407VE is not set
+CONFIG_ARCH_CHIP_STM32F407VG=y
+# CONFIG_ARCH_CHIP_STM32F407ZE is not set
+# CONFIG_ARCH_CHIP_STM32F407ZG is not set
+# CONFIG_ARCH_CHIP_STM32F407IE is not set
+# CONFIG_ARCH_CHIP_STM32F407IG is not set
+# CONFIG_ARCH_CHIP_STM32F427V is not set
+# CONFIG_ARCH_CHIP_STM32F427Z is not set
+# CONFIG_ARCH_CHIP_STM32F427I is not set
+# CONFIG_ARCH_CHIP_STM32F429V is not set
+# CONFIG_ARCH_CHIP_STM32F429Z is not set
+# CONFIG_ARCH_CHIP_STM32F429I is not set
+# CONFIG_ARCH_CHIP_STM32F429B is not set
+# CONFIG_ARCH_CHIP_STM32F429N is not set
+# CONFIG_STM32_STM32L15XX is not set
+# CONFIG_STM32_ENERGYLITE is not set
+# CONFIG_STM32_STM32F10XX is not set
+# CONFIG_STM32_VALUELINE is not set
+# CONFIG_STM32_CONNECTIVITYLINE is not set
+# CONFIG_STM32_PERFORMANCELINE is not set
+# CONFIG_STM32_HIGHDENSITY is not set
+# CONFIG_STM32_MEDIUMDENSITY is not set
+# CONFIG_STM32_LOWDENSITY is not set
+# CONFIG_STM32_STM32F20XX is not set
+# CONFIG_STM32_STM32F30XX is not set
+CONFIG_STM32_STM32F40XX=y
+# CONFIG_STM32_DFU is not set
+
+#
+# STM32 Peripheral Support
+#
+# CONFIG_STM32_HAVE_USBDEV is not set
+CONFIG_STM32_HAVE_OTGFS=y
+# CONFIG_STM32_ADC1 is not set
+# CONFIG_STM32_ADC2 is not set
+# CONFIG_STM32_ADC3 is not set
+# CONFIG_STM32_BKPSRAM is not set
+# CONFIG_STM32_CAN1 is not set
+# CONFIG_STM32_CAN2 is not set
+# CONFIG_STM32_CCMDATARAM is not set
+# CONFIG_STM32_CRC is not set
+# CONFIG_STM32_CRYP is not set
+# CONFIG_STM32_DMA1 is not set
+# CONFIG_STM32_DMA2 is not set
+# CONFIG_STM32_DAC1 is not set
+# CONFIG_STM32_DAC2 is not set
+# CONFIG_STM32_DCMI is not set
+# CONFIG_STM32_ETHMAC is not set
+# CONFIG_STM32_FSMC is not set
+# CONFIG_STM32_HASH is not set
+# CONFIG_STM32_I2C1 is not set
+# CONFIG_STM32_I2C2 is not set
+# CONFIG_STM32_I2C3 is not set
+# CONFIG_STM32_OTGFS is not set
+# CONFIG_STM32_OTGHS is not set
+# CONFIG_STM32_PWR is not set
+# CONFIG_STM32_RNG is not set
+# CONFIG_STM32_SDIO is not set
+# CONFIG_STM32_SPI1 is not set
+# CONFIG_STM32_SPI2 is not set
+# CONFIG_STM32_SPI3 is not set
+CONFIG_STM32_SYSCFG=y
+# CONFIG_STM32_TIM1 is not set
+# CONFIG_STM32_TIM2 is not set
+# CONFIG_STM32_TIM3 is not set
+# CONFIG_STM32_TIM4 is not set
+# CONFIG_STM32_TIM5 is not set
+# CONFIG_STM32_TIM6 is not set
+# CONFIG_STM32_TIM7 is not set
+# CONFIG_STM32_TIM8 is not set
+# CONFIG_STM32_TIM9 is not set
+# CONFIG_STM32_TIM10 is not set
+# CONFIG_STM32_TIM11 is not set
+# CONFIG_STM32_TIM12 is not set
+# CONFIG_STM32_TIM13 is not set
+# CONFIG_STM32_TIM14 is not set
+# CONFIG_STM32_USART1 is not set
+CONFIG_STM32_USART2=y
+# CONFIG_STM32_USART3 is not set
+# CONFIG_STM32_UART4 is not set
+# CONFIG_STM32_UART5 is not set
+# CONFIG_STM32_USART6 is not set
+# CONFIG_STM32_IWDG is not set
+# CONFIG_STM32_WWDG is not set
+
+#
+# Alternate Pin Mapping
+#
+# CONFIG_STM32_FLASH_PREFETCH is not set
+# CONFIG_STM32_JTAG_DISABLE is not set
+# CONFIG_STM32_JTAG_FULL_ENABLE is not set
+# CONFIG_STM32_JTAG_NOJNTRST_ENABLE is not set
+CONFIG_STM32_JTAG_SW_ENABLE=y
+# CONFIG_STM32_DISABLE_IDLE_SLEEP_DURING_DEBUG is not set
+# CONFIG_STM32_FORCEPOWER is not set
+# CONFIG_ARCH_BOARD_STM32_CUSTOM_CLOCKCONFIG is not set
+# CONFIG_STM32_CCMEXCLUDE is not set
+CONFIG_STM32_USART=y
+
+#
+# U[S]ART Configuration
+#
+# CONFIG_USART2_RS485 is not set
+# CONFIG_SERIAL_DISABLE_REORDERING is not set
+# CONFIG_STM32_USART_SINGLEWIRE is not set
+
+#
+# USB Host Configuration
+#
+
+#
+# USB Device Configuration
+#
+
+#
+# Architecture Options
+#
+# CONFIG_ARCH_NOINTC is not set
+# CONFIG_ARCH_VECNOTIRQ is not set
+# CONFIG_ARCH_DMA is not set
+CONFIG_ARCH_HAVE_IRQPRIO=y
+# CONFIG_ARCH_ADDRENV is not set
+CONFIG_ARCH_HAVE_VFORK=y
+# CONFIG_ARCH_HAVE_MMU is not set
+# CONFIG_ARCH_NAND_HWECC is not set
+# CONFIG_ARCH_IRQPRIO is not set
+CONFIG_ARCH_STACKDUMP=y
+# CONFIG_ENDIAN_BIG is not set
+# CONFIG_ARCH_IDLE_CUSTOM is not set
+# CONFIG_ARCH_HAVE_RAMFUNCS is not set
+CONFIG_ARCH_HAVE_RAMVECTORS=y
+# CONFIG_ARCH_RAMVECTORS is not set
+
+#
+# Board Settings
+#
+CONFIG_BOARD_LOOPSPERMSEC=16717
+# CONFIG_ARCH_CALIBRATION is not set
+
+#
+# Interrupt options
+#
+CONFIG_ARCH_HAVE_INTERRUPTSTACK=y
+CONFIG_ARCH_INTERRUPTSTACK=0
+CONFIG_ARCH_HAVE_HIPRI_INTERRUPT=y
+# CONFIG_ARCH_HIPRI_INTERRUPT is not set
+
+#
+# Boot options
+#
+# CONFIG_BOOT_RUNFROMEXTSRAM is not set
+CONFIG_BOOT_RUNFROMFLASH=y
+# CONFIG_BOOT_RUNFROMISRAM is not set
+# CONFIG_BOOT_RUNFROMSDRAM is not set
+# CONFIG_BOOT_COPYTORAM is not set
+
+#
+# Boot Memory Configuration
+#
+CONFIG_RAM_START=0x20000000
+CONFIG_RAM_SIZE=114688
+# CONFIG_ARCH_HAVE_SDRAM is not set
+
+#
+# Board Selection
+#
+CONFIG_ARCH_BOARD_STM32F4_DISCOVERY=y
+# CONFIG_ARCH_BOARD_MIKROE_STM32F4 is not set
+# CONFIG_ARCH_BOARD_CUSTOM is not set
+CONFIG_ARCH_BOARD="stm32f4discovery"
+
+#
+# Common Board Options
+#
+CONFIG_ARCH_HAVE_LEDS=y
+CONFIG_ARCH_LEDS=y
+CONFIG_ARCH_HAVE_BUTTONS=y
+# CONFIG_ARCH_BUTTONS is not set
+CONFIG_ARCH_HAVE_IRQBUTTONS=y
+
+#
+# Board-Specific Options
+#
+
+#
+# RTOS Features
+#
+# CONFIG_BOARD_INITIALIZE is not set
+CONFIG_USEC_PER_TICK=10000
+# CONFIG_SYSTEM_TIME64 is not set
+CONFIG_RR_INTERVAL=200
+# CONFIG_SCHED_CPULOAD is not set
+# CONFIG_SCHED_INSTRUMENTATION is not set
+CONFIG_TASK_NAME_SIZE=0
+# CONFIG_SCHED_HAVE_PARENT is not set
+# CONFIG_JULIAN_TIME is not set
+CONFIG_START_YEAR=2012
+CONFIG_START_MONTH=11
+CONFIG_START_DAY=2
+CONFIG_DEV_CONSOLE=y
+# CONFIG_MUTEX_TYPES is not set
+# CONFIG_PRIORITY_INHERITANCE is not set
+# CONFIG_FDCLONE_DISABLE is not set
+# CONFIG_FDCLONE_STDIO is not set
+CONFIG_SDCLONE_DISABLE=y
+# CONFIG_SCHED_WAITPID is not set
+# CONFIG_SCHED_STARTHOOK is not set
+# CONFIG_SCHED_ATEXIT is not set
+CONFIG_SCHED_ONEXIT=y
+CONFIG_SCHED_ONEXIT_MAX=4
+CONFIG_USER_ENTRYPOINT="cxxtest_main"
+CONFIG_DISABLE_OS_API=y
+# CONFIG_DISABLE_POSIX_TIMERS is not set
+# CONFIG_DISABLE_PTHREAD is not set
+# CONFIG_DISABLE_SIGNALS is not set
+# CONFIG_DISABLE_MQUEUE is not set
+CONFIG_DISABLE_ENVIRON=y
+
+#
+# Signal Numbers
+#
+CONFIG_SIG_SIGUSR1=1
+CONFIG_SIG_SIGUSR2=2
+CONFIG_SIG_SIGALARM=3
+CONFIG_SIG_SIGCONDTIMEDOUT=16
+
+#
+# Sizes of configurable things (0 disables)
+#
+CONFIG_MAX_TASKS=16
+CONFIG_MAX_TASK_ARGS=4
+CONFIG_NPTHREAD_KEYS=4
+CONFIG_NFILE_DESCRIPTORS=8
+CONFIG_NFILE_STREAMS=8
+CONFIG_NAME_MAX=32
+CONFIG_PREALLOC_MQ_MSGS=4
+CONFIG_MQ_MAXMSGSIZE=32
+CONFIG_MAX_WDOGPARMS=2
+CONFIG_PREALLOC_WDOGS=4
+CONFIG_WDOG_INTRESERVE=0
+CONFIG_PREALLOC_TIMERS=4
+
+#
+# Stack and heap information
+#
+CONFIG_IDLETHREAD_STACKSIZE=1024
+CONFIG_USERMAIN_STACKSIZE=2048
+CONFIG_PTHREAD_STACK_MIN=256
+CONFIG_PTHREAD_STACK_DEFAULT=2048
+
+#
+# Device Drivers
+#
+CONFIG_DISABLE_POLL=y
+CONFIG_DEV_NULL=y
+# CONFIG_DEV_ZERO is not set
+# CONFIG_LOOP is not set
+# CONFIG_RAMDISK is not set
+# CONFIG_CAN is not set
+# CONFIG_ARCH_HAVE_PWM_PULSECOUNT is not set
+# CONFIG_PWM is not set
+CONFIG_ARCH_HAVE_I2CRESET=y
+# CONFIG_I2C is not set
+# CONFIG_SPI is not set
+# CONFIG_I2S is not set
+# CONFIG_RTC is not set
+# CONFIG_WATCHDOG is not set
+# CONFIG_ANALOG is not set
+# CONFIG_AUDIO_DEVICES is not set
+# CONFIG_VIDEO_DEVICES is not set
+# CONFIG_BCH is not set
+# CONFIG_INPUT is not set
+# CONFIG_LCD is not set
+# CONFIG_MMCSD is not set
+# CONFIG_MTD is not set
+# CONFIG_PIPES is not set
+# CONFIG_PM is not set
+# CONFIG_POWER is not set
+# CONFIG_SENSORS is not set
+# CONFIG_SERCOMM_CONSOLE is not set
+CONFIG_SERIAL=y
+# CONFIG_DEV_LOWCONSOLE is not set
+# CONFIG_16550_UART is not set
+# CONFIG_ARCH_HAVE_UART is not set
+# CONFIG_ARCH_HAVE_UART0 is not set
+# CONFIG_ARCH_HAVE_UART1 is not set
+# CONFIG_ARCH_HAVE_UART2 is not set
+# CONFIG_ARCH_HAVE_UART3 is not set
+# CONFIG_ARCH_HAVE_UART4 is not set
+# CONFIG_ARCH_HAVE_UART5 is not set
+# CONFIG_ARCH_HAVE_UART6 is not set
+# CONFIG_ARCH_HAVE_UART7 is not set
+# CONFIG_ARCH_HAVE_UART8 is not set
+# CONFIG_ARCH_HAVE_SCI0 is not set
+# CONFIG_ARCH_HAVE_SCI1 is not set
+# CONFIG_ARCH_HAVE_USART0 is not set
+# CONFIG_ARCH_HAVE_USART1 is not set
+CONFIG_ARCH_HAVE_USART2=y
+# CONFIG_ARCH_HAVE_USART3 is not set
+# CONFIG_ARCH_HAVE_USART4 is not set
+# CONFIG_ARCH_HAVE_USART5 is not set
+# CONFIG_ARCH_HAVE_USART6 is not set
+# CONFIG_ARCH_HAVE_USART7 is not set
+# CONFIG_ARCH_HAVE_USART8 is not set
+
+#
+# USART Configuration
+#
+CONFIG_USART2_ISUART=y
+CONFIG_MCU_SERIAL=y
+CONFIG_STANDARD_SERIAL=y
+CONFIG_USART2_SERIAL_CONSOLE=y
+# CONFIG_NO_SERIAL_CONSOLE is not set
+
+#
+# USART2 Configuration
+#
+CONFIG_USART2_RXBUFSIZE=128
+CONFIG_USART2_TXBUFSIZE=128
+CONFIG_USART2_BAUD=115200
+CONFIG_USART2_BITS=8
+CONFIG_USART2_PARITY=0
+CONFIG_USART2_2STOP=0
+# CONFIG_USART2_IFLOWCONTROL is not set
+# CONFIG_USART2_OFLOWCONTROL is not set
+# CONFIG_SERIAL_IFLOWCONTROL is not set
+# CONFIG_SERIAL_OFLOWCONTROL is not set
+# CONFIG_USBDEV is not set
+# CONFIG_USBHOST is not set
+# CONFIG_WIRELESS is not set
+
+#
+# System Logging Device Options
+#
+
+#
+# System Logging
+#
+# CONFIG_RAMLOG is not set
+
+#
+# Networking Support
+#
+# CONFIG_ARCH_HAVE_NET is not set
+# CONFIG_ARCH_HAVE_PHY is not set
+# CONFIG_NET is not set
+
+#
+# File Systems
+#
+
+#
+# File system configuration
+#
+CONFIG_DISABLE_MOUNTPOINT=y
+# CONFIG_DISABLE_PSEUDOFS_OPERATIONS is not set
+# CONFIG_FS_READABLE is not set
+# CONFIG_FS_WRITABLE is not set
+# CONFIG_FS_RAMMAP is not set
+# CONFIG_FS_PROCFS is not set
+
+#
+# System Logging
+#
+
+# CONFIG_SYSLOG is not set
+
+#
+# Graphics Support
+#
+# CONFIG_NX is not set
+
+#
+# Memory Management
+#
+# CONFIG_MM_SMALL is not set
+CONFIG_MM_REGIONS=2
+# CONFIG_ARCH_HAVE_HEAP2 is not set
+# CONFIG_GRAN is not set
+
+#
+# Audio Support
+#
+# CONFIG_AUDIO is not set
+
+#
+# Binary Formats
+#
+# CONFIG_BINFMT_DISABLE is not set
+# CONFIG_NXFLAT is not set
+# CONFIG_ELF is not set
+# CONFIG_BUILTIN is not set
+# CONFIG_PIC is not set
+CONFIG_SYMTAB_ORDEREDBYNAME=y
+
+#
+# Library Routines
+#
+
+#
+# Standard C Library Options
+#
+CONFIG_STDIO_BUFFER_SIZE=64
+CONFIG_STDIO_LINEBUFFER=y
+CONFIG_NUNGET_CHARS=2
+CONFIG_LIBM=y
+# CONFIG_NOPRINTF_FIELDWIDTH is not set
+# CONFIG_LIBC_FLOATINGPOINT is not set
+CONFIG_LIB_RAND_ORDER=1
+# CONFIG_EOL_IS_CR is not set
+# CONFIG_EOL_IS_LF is not set
+# CONFIG_EOL_IS_BOTH_CRLF is not set
+CONFIG_EOL_IS_EITHER_CRLF=y
+# CONFIG_LIBC_EXECFUNCS is not set
+CONFIG_POSIX_SPAWN_PROXY_STACKSIZE=1024
+CONFIG_TASK_SPAWN_DEFAULT_STACKSIZE=2048
+# CONFIG_LIBC_STRERROR is not set
+# CONFIG_LIBC_PERROR_STDOUT is not set
+CONFIG_ARCH_LOWPUTC=y
+CONFIG_LIB_SENDFILE_BUFSIZE=512
+# CONFIG_ARCH_ROMGETC is not set
+# CONFIG_ARCH_OPTIMIZED_FUNCTIONS is not set
+
+#
+# Non-standard Library Support
+#
+# CONFIG_SCHED_WORKQUEUE is not set
+# CONFIG_LIB_KBDCODEC is not set
+# CONFIG_LIB_SLCDCODEC is not set
+
+#
+# Basic CXX Support
+#
+CONFIG_C99_BOOL8=y
+CONFIG_HAVE_CXX=y
+CONFIG_HAVE_CXXINITIALIZE=y
+# CONFIG_CXX_NEWLONG is not set
+
+#
+# uClibc++ Standard C++ Library
+#
+CONFIG_UCLIBCXX=y
+CONFIG_UCLIBCXX_EXCEPTION=y
+CONFIG_UCLIBCXX_IOSTREAM_BUFSIZE=32
+CONFIG_UCLIBCXX_HAVE_LIBSUPCXX=y
+
+#
+# Application Configuration
+#
+
+#
+# Built-In Applications
+#
+
+#
+# Examples
+#
+# CONFIG_EXAMPLES_BUTTONS is not set
+# CONFIG_EXAMPLES_CAN is not set
+# CONFIG_EXAMPLES_CONFIGDATA is not set
+CONFIG_EXAMPLES_CXXTEST=y
+CONFIG_EXAMPLES_CXXTEST_CXXINITIALIZE=y
+# CONFIG_EXAMPLES_DHCPD is not set
+# CONFIG_EXAMPLES_ELF is not set
+# CONFIG_EXAMPLES_FTPC is not set
+# CONFIG_EXAMPLES_FTPD is not set
+# CONFIG_EXAMPLES_HELLO is not set
+# CONFIG_EXAMPLES_HELLOXX is not set
+# CONFIG_EXAMPLES_JSON is not set
+# CONFIG_EXAMPLES_HIDKBD is not set
+# CONFIG_EXAMPLES_KEYPADTEST is not set
+# CONFIG_EXAMPLES_IGMP is not set
+# CONFIG_EXAMPLES_LCDRW is not set
+# CONFIG_EXAMPLES_MM is not set
+# CONFIG_EXAMPLES_MODBUS is not set
+# CONFIG_EXAMPLES_MOUNT is not set
+# CONFIG_EXAMPLES_NRF24L01TERM is not set
+# CONFIG_EXAMPLES_NSH is not set
+# CONFIG_EXAMPLES_NULL is not set
+# CONFIG_EXAMPLES_NX is not set
+# CONFIG_EXAMPLES_NXTERM is not set
+# CONFIG_EXAMPLES_NXFFS is not set
+# CONFIG_EXAMPLES_NXFLAT is not set
+# CONFIG_EXAMPLES_NXHELLO is not set
+# CONFIG_EXAMPLES_NXIMAGE is not set
+# CONFIG_EXAMPLES_NXLINES is not set
+# CONFIG_EXAMPLES_NXTEXT is not set
+# CONFIG_EXAMPLES_OSTEST is not set
+# CONFIG_EXAMPLES_PASHELLO is not set
+# CONFIG_EXAMPLES_PIPE is not set
+# CONFIG_EXAMPLES_POLL is not set
+# CONFIG_EXAMPLES_POSIXSPAWN is not set
+# CONFIG_EXAMPLES_QENCODER is not set
+# CONFIG_EXAMPLES_RGMP is not set
+# CONFIG_EXAMPLES_ROMFS is not set
+# CONFIG_EXAMPLES_SENDMAIL is not set
+# CONFIG_EXAMPLES_SERLOOP is not set
+# CONFIG_EXAMPLES_SLCD is not set
+# CONFIG_EXAMPLES_SMART is not set
+# CONFIG_EXAMPLES_TCPECHO is not set
+# CONFIG_EXAMPLES_TELNETD is not set
+# CONFIG_EXAMPLES_THTTPD is not set
+# CONFIG_EXAMPLES_TIFF is not set
+# CONFIG_EXAMPLES_TOUCHSCREEN is not set
+# CONFIG_EXAMPLES_UDP is not set
+# CONFIG_EXAMPLES_WEBSERVER is not set
+# CONFIG_EXAMPLES_USBSERIAL is not set
+# CONFIG_EXAMPLES_USBTERM is not set
+# CONFIG_EXAMPLES_WATCHDOG is not set
+
+#
+# Graphics Support
+#
+# CONFIG_TIFF is not set
+
+#
+# Interpreters
+#
+# CONFIG_INTERPRETERS_FICL is not set
+# CONFIG_INTERPRETERS_PCODE is not set
+
+#
+# Network Utilities
+#
+
+#
+# Networking Utilities
+#
+# CONFIG_NETUTILS_CODECS is not set
+# CONFIG_NETUTILS_DHCPD is not set
+# CONFIG_NETUTILS_FTPC is not set
+# CONFIG_NETUTILS_FTPD is not set
+# CONFIG_NETUTILS_JSON is not set
+# CONFIG_NETUTILS_SMTP is not set
+# CONFIG_NETUTILS_TFTPC is not set
+# CONFIG_NETUTILS_THTTPD is not set
+# CONFIG_NETUTILS_NETLIB is not set
+# CONFIG_NETUTILS_WEBCLIENT is not set
+
+#
+# FreeModBus
+#
+# CONFIG_MODBUS is not set
+
+#
+# NSH Library
+#
+# CONFIG_NSH_LIBRARY is not set
+
+#
+# NxWidgets/NxWM
+#
+
+#
+# Platform-specific Support
+#
+# CONFIG_PLATFORM_CONFIGDATA is not set
+
+#
+# System Libraries and NSH Add-Ons
+#
+
+#
+# USB CDC/ACM Device Commands
+#
+
+#
+# USB Composite Device Commands
+#
+
+#
+# Custom Free Memory Command
+#
+# CONFIG_SYSTEM_FREE is not set
+
+#
+# I2C tool
+#
+
+#
+# INI File Parser
+#
+# CONFIG_SYSTEM_INIFILE is not set
+
+#
+# FLASH Program Installation
+#
+# CONFIG_SYSTEM_INSTALL is not set
+
+#
+# FLASH Erase-all Command
+#
+
+#
+# NxPlayer media player library / command Line
+#
+# CONFIG_SYSTEM_NXPLAYER is not set
+
+#
+# RAM test
+#
+# CONFIG_SYSTEM_RAMTEST is not set
+
+#
+# readline()
+#
+# CONFIG_SYSTEM_READLINE is not set
+
+#
+# Power Off
+#
+# CONFIG_SYSTEM_POWEROFF is not set
+
+#
+# RAMTRON
+#
+# CONFIG_SYSTEM_RAMTRON is not set
+
+#
+# SD Card
+#
+# CONFIG_SYSTEM_SDCARD is not set
+
+#
+# Sysinfo
+#
+# CONFIG_SYSTEM_SYSINFO is not set
+
+#
+# USB Monitor
+#
+
+#
+# EMACS-like Command Line Editor
+#
+# CONFIG_SYSTEM_CLE is not set
+
+#
+# VI Work-Alike Editor
+#
+# CONFIG_SYSTEM_VI is not set
+
+#
+# Stack Monitor
+#
+
+#
+# USB Mass Storage Device Commands
+#
+
+#
+# Zmodem Commands
+#
+# CONFIG_SYSTEM_ZMODEM is not set
diff --git a/nuttx/configs/px4fmu-v2/cxxtest/setenv.sh b/nuttx/configs/px4fmu-v2/cxxtest/setenv.sh
new file mode 100755
index 000000000..8994a713c
--- /dev/null
+++ b/nuttx/configs/px4fmu-v2/cxxtest/setenv.sh
@@ -0,0 +1,77 @@
+#!/bin/bash
+# configs/stm32f4discovery/cxxtest/setenv.sh
+#
+#   Copyright (C) 2012, 2014 Gregory Nutt. All rights reserved.
+#   Author: Gregory Nutt <gnutt@nuttx.org>
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions
+# are met:
+#
+# 1. Redistributions of source code must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+# 2. Redistributions in binary form must reproduce the above copyright
+#    notice, this list of conditions and the following disclaimer in
+#    the documentation and/or other materials provided with the
+#    distribution.
+# 3. Neither the name NuttX nor the names of its contributors may be
+#    used to endorse or promote products derived from this software
+#    without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+#
+
+if [ "$_" = "$0" ] ; then
+  echo "You must source this script, not run it!" 1>&2
+  exit 1
+fi
+
+WD=`pwd`
+if [ ! -x "setenv.sh" ]; then
+  echo "This script must be executed from the top-level NuttX build directory"
+  exit 1
+fi
+
+if [ -z "${PATH_ORIG}" ]; then
+  export PATH_ORIG="${PATH}"
+fi
+
+# This is the Cygwin path to the location where I installed the RIDE
+# toolchain under windows.  You will also have to edit this if you install
+# the RIDE toolchain in any other location
+#export TOOLCHAIN_BIN="/cygdrive/c/Program Files (x86)/Raisonance/Ride/arm-gcc/bin"
+
+# This is the Cygwin path to the location where I installed the CodeSourcery
+# toolchain under windows.  You will also have to edit this if you install
+# the CodeSourcery toolchain in any other location
+# export TOOLCHAIN_BIN="/cygdrive/c/Program Files (x86)/CodeSourcery/Sourcery G++ Lite/bin"
+export TOOLCHAIN_BIN="/cygdrive/c/Program Files (x86)/CodeSourcery/Sourcery_CodeBench_Lite_for_ARM_EABI/bin"
+#export TOOLCHAIN_BIN="/cygdrive/c/Users/MyName/MentorGraphics/Sourcery_CodeBench_Lite_for_ARM_EABI/bin"
+
+# These are the Cygwin paths to the locations where I installed the Atollic
+# toolchain under windows.  You will also have to edit this if you install
+# the Atollic toolchain in any other location.  /usr/bin is added before
+# the Atollic bin path because there is are binaries named gcc.exe and g++.exe
+# at those locations as well.
+#export TOOLCHAIN_BIN="/usr/bin:/cygdrive/c/Program Files (x86)/Atollic/TrueSTUDIO for ARM Pro 2.3.0/ARMTools/bin"
+#export TOOLCHAIN_BIN="/usr/bin:/cygdrive/c/Program Files (x86)/Atollic/TrueSTUDIO for STMicroelectronics STM32 Lite 2.3.0/ARMTools/bin"
+
+# This is the Cygwin path to the location where I build the buildroot
+# toolchain.
+#export TOOLCHAIN_BIN="${WD}/../misc/buildroot/build_arm_nofpu/staging_dir/bin"
+
+# Add the path to the toolchain to the PATH varialble
+export PATH="${TOOLCHAIN_BIN}:/sbin:/usr/sbin:${PATH_ORIG}"
+
+echo "PATH : ${PATH}"
diff --git a/nuttx/configs/px4fmu-v2/elf/Make.defs b/nuttx/configs/px4fmu-v2/elf/Make.defs
new file mode 100644
index 000000000..fb0e90906
--- /dev/null
+++ b/nuttx/configs/px4fmu-v2/elf/Make.defs
@@ -0,0 +1,131 @@
+############################################################################
+# configs/stm32f4discovery/elf/Make.defs
+#
+#   Copyright (C) 2011-2012 Gregory Nutt. All rights reserved.
+#   Author: Gregory Nutt <gnutt@nuttx.org>
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions
+# are met:
+#
+# 1. Redistributions of source code must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+# 2. Redistributions in binary form must reproduce the above copyright
+#    notice, this list of conditions and the following disclaimer in
+#    the documentation and/or other materials provided with the
+#    distribution.
+# 3. Neither the name NuttX nor the names of its contributors may be
+#    used to endorse or promote products derived from this software
+#    without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+#
+############################################################################
+
+include ${TOPDIR}/.config
+include ${TOPDIR}/tools/Config.mk
+include ${TOPDIR}/arch/arm/src/armv7-m/Toolchain.defs
+
+LDSCRIPT = ld.script
+
+ifeq ($(WINTOOL),y)
+  # Windows-native toolchains
+  DIRLINK = $(TOPDIR)/tools/copydir.sh
+  DIRUNLINK = $(TOPDIR)/tools/unlink.sh
+  MKDEP = $(TOPDIR)/tools/mknulldeps.sh
+  ARCHINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}"
+  ARCHXXINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}" -isystem "${shell cygpath -w $(TOPDIR)/include/cxx}"
+  ARCHSCRIPT = -T "${shell cygpath -w $(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/scripts/$(LDSCRIPT)}"
+else
+  # Linux/Cygwin-native toolchain
+  MKDEP = $(TOPDIR)/tools/mkdeps.sh
+  ARCHINCLUDES = -I. -isystem $(TOPDIR)/include
+  ARCHXXINCLUDES = -I. -isystem $(TOPDIR)/include -isystem $(TOPDIR)/include/cxx
+  ARCHSCRIPT = -T$(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/scripts/$(LDSCRIPT)
+endif
+
+CC = $(CROSSDEV)gcc
+CXX = $(CROSSDEV)g++
+CPP = $(CROSSDEV)gcc -E
+LD = $(CROSSDEV)ld
+AR = $(ARCROSSDEV)ar rcs
+NM = $(ARCROSSDEV)nm
+OBJCOPY = $(CROSSDEV)objcopy
+OBJDUMP = $(CROSSDEV)objdump
+
+ARCHCCVERSION = ${shell $(CC) -v 2>&1 | sed -n '/^gcc version/p' | sed -e 's/^gcc version \([0-9\.]\)/\1/g' -e 's/[-\ ].*//g' -e '1q'}
+ARCHCCMAJOR = ${shell echo $(ARCHCCVERSION) | cut -d'.' -f1}
+
+ifeq ($(CONFIG_DEBUG_SYMBOLS),y)
+  ARCHOPTIMIZATION = -g
+endif
+
+ifneq ($(CONFIG_DEBUG_NOOPT),y)
+  ARCHOPTIMIZATION += $(MAXOPTIMIZATION) -fno-strict-aliasing -fno-strength-reduce -fomit-frame-pointer
+endif
+
+ARCHCFLAGS = -fno-builtin
+ARCHCXXFLAGS = -fno-builtin -fno-exceptions -fno-rtti
+ARCHWARNINGS = -Wall -Wstrict-prototypes -Wshadow
+ARCHWARNINGSXX = -Wall -Wshadow
+ARCHDEFINES =
+ARCHPICFLAGS = -fpic -msingle-pic-base -mpic-register=r10
+
+CFLAGS = $(ARCHCFLAGS) $(ARCHWARNINGS) $(ARCHOPTIMIZATION) $(ARCHCPUFLAGS) $(ARCHINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES) -pipe
+CPICFLAGS = $(ARCHPICFLAGS) $(CFLAGS)
+CXXFLAGS = $(ARCHCXXFLAGS) $(ARCHWARNINGSXX) $(ARCHOPTIMIZATION) $(ARCHCPUFLAGS) $(ARCHXXINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES) -pipe
+CXXPICFLAGS = $(ARCHPICFLAGS) $(CXXFLAGS)
+CPPFLAGS = $(ARCHINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES)
+AFLAGS = $(CFLAGS) -D__ASSEMBLY__
+
+# NXFLAT module definitions
+
+NXFLATLDFLAGS1 = -r -d -warn-common
+NXFLATLDFLAGS2 = $(NXFLATLDFLAGS1) -T$(TOPDIR)/binfmt/libnxflat/gnu-nxflat-pcrel.ld -no-check-sections
+LDNXFLATFLAGS = -e main -s 2048
+
+# ELF module definitions
+
+CELFFLAGS = $(CFLAGS) -mlong-calls # --target1-abs
+CXXELFFLAGS = $(CXXFLAGS) -mlong-calls # --target1-abs
+
+LDELFFLAGS = -r -e main
+ifeq ($(WINTOOL),y)
+  LDELFFLAGS += -T "${shell cygpath -w $(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/scripts/gnu-elf.ld}"
+else
+  LDELFFLAGS += -T $(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/scripts/gnu-elf.ld
+endif
+
+# File extensions
+
+OBJEXT = .o
+LIBEXT = .a
+EXEEXT =
+
+# Linker flags
+
+ifneq ($(CROSSDEV),arm-nuttx-elf-)
+  LDFLAGS += -nostartfiles -nodefaultlibs
+endif
+ifeq ($(CONFIG_DEBUG_SYMBOLS),y)
+  LDFLAGS += -g
+endif
+
+# Host tools
+
+HOSTCC = gcc
+HOSTINCLUDES = -I.
+HOSTCFLAGS = -Wall -Wstrict-prototypes -Wshadow -g -pipe
+HOSTLDFLAGS =
+
diff --git a/nuttx/configs/px4fmu-v2/elf/defconfig b/nuttx/configs/px4fmu-v2/elf/defconfig
new file mode 100644
index 000000000..222d7f48e
--- /dev/null
+++ b/nuttx/configs/px4fmu-v2/elf/defconfig
@@ -0,0 +1,849 @@
+#
+# Automatically generated file; DO NOT EDIT.
+# Nuttx/ Configuration
+#
+
+#
+# Build Setup
+#
+# CONFIG_EXPERIMENTAL is not set
+# CONFIG_DEFAULT_SMALL is not set
+# CONFIG_HOST_LINUX is not set
+# CONFIG_HOST_OSX is not set
+CONFIG_HOST_WINDOWS=y
+# CONFIG_HOST_OTHER is not set
+# CONFIG_WINDOWS_NATIVE is not set
+CONFIG_WINDOWS_CYGWIN=y
+# CONFIG_WINDOWS_MSYS is not set
+# CONFIG_WINDOWS_OTHER is not set
+
+#
+# Build Configuration
+#
+# CONFIG_APPS_DIR="../apps"
+# CONFIG_BUILD_2PASS is not set
+
+#
+# Binary Output Formats
+#
+# CONFIG_RRLOAD_BINARY is not set
+CONFIG_INTELHEX_BINARY=y
+# CONFIG_MOTOROLA_SREC is not set
+# CONFIG_RAW_BINARY is not set
+
+#
+# Customize Header Files
+#
+# CONFIG_ARCH_STDINT_H is not set
+# CONFIG_ARCH_STDBOOL_H is not set
+# CONFIG_ARCH_MATH_H is not set
+# CONFIG_ARCH_FLOAT_H is not set
+# CONFIG_ARCH_STDARG_H is not set
+
+#
+# Debug Options
+#
+# CONFIG_DEBUG is not set
+CONFIG_ARCH_HAVE_STACKCHECK=y
+CONFIG_ARCH_HAVE_HEAPCHECK=y
+# CONFIG_DEBUG_SYMBOLS is not set
+CONFIG_ARCH_HAVE_CUSTOMOPT=y
+# CONFIG_DEBUG_NOOPT is not set
+# CONFIG_DEBUG_CUSTOMOPT is not set
+CONFIG_DEBUG_FULLOPT=y
+
+#
+# System Type
+#
+CONFIG_ARCH_ARM=y
+# CONFIG_ARCH_AVR is not set
+# CONFIG_ARCH_HC is not set
+# CONFIG_ARCH_MIPS is not set
+# CONFIG_ARCH_RGMP is not set
+# CONFIG_ARCH_SH is not set
+# CONFIG_ARCH_SIM is not set
+# CONFIG_ARCH_X86 is not set
+# CONFIG_ARCH_Z16 is not set
+# CONFIG_ARCH_Z80 is not set
+CONFIG_ARCH="arm"
+
+#
+# ARM Options
+#
+# CONFIG_ARCH_CHIP_A1X is not set
+# CONFIG_ARCH_CHIP_C5471 is not set
+# CONFIG_ARCH_CHIP_CALYPSO is not set
+# CONFIG_ARCH_CHIP_DM320 is not set
+# CONFIG_ARCH_CHIP_IMX is not set
+# CONFIG_ARCH_CHIP_KINETIS is not set
+# CONFIG_ARCH_CHIP_KL is not set
+# CONFIG_ARCH_CHIP_LM is not set
+# CONFIG_ARCH_CHIP_LPC17XX is not set
+# CONFIG_ARCH_CHIP_LPC214X is not set
+# CONFIG_ARCH_CHIP_LPC2378 is not set
+# CONFIG_ARCH_CHIP_LPC31XX is not set
+# CONFIG_ARCH_CHIP_LPC43XX is not set
+# CONFIG_ARCH_CHIP_NUC1XX is not set
+# CONFIG_ARCH_CHIP_SAMA5 is not set
+# CONFIG_ARCH_CHIP_SAMD is not set
+# CONFIG_ARCH_CHIP_SAM34 is not set
+CONFIG_ARCH_CHIP_STM32=y
+# CONFIG_ARCH_CHIP_STR71X is not set
+# CONFIG_ARCH_ARM7TDMI is not set
+# CONFIG_ARCH_ARM926EJS is not set
+# CONFIG_ARCH_ARM920T is not set
+# CONFIG_ARCH_CORTEXM0 is not set
+# CONFIG_ARCH_CORTEXM3 is not set
+CONFIG_ARCH_CORTEXM4=y
+# CONFIG_ARCH_CORTEXA5 is not set
+# CONFIG_ARCH_CORTEXA8 is not set
+CONFIG_ARCH_FAMILY="armv7-m"
+CONFIG_ARCH_CHIP="stm32"
+CONFIG_ARMV7M_USEBASEPRI=y
+CONFIG_ARCH_HAVE_CMNVECTOR=y
+# CONFIG_ARMV7M_CMNVECTOR is not set
+CONFIG_ARCH_HAVE_FPU=y
+# CONFIG_ARCH_FPU is not set
+CONFIG_ARCH_HAVE_MPU=y
+# CONFIG_ARMV7M_MPU is not set
+
+#
+# ARMV7M Configuration Options
+#
+# CONFIG_ARMV7M_TOOLCHAIN_ATOLLIC is not set
+# CONFIG_ARMV7M_TOOLCHAIN_BUILDROOT is not set
+# CONFIG_ARMV7M_TOOLCHAIN_CODEREDW is not set
+CONFIG_ARMV7M_TOOLCHAIN_CODESOURCERYW=y
+# CONFIG_ARMV7M_TOOLCHAIN_DEVKITARM is not set
+# CONFIG_ARMV7M_TOOLCHAIN_GNU_EABIL is not set
+# CONFIG_ARMV7M_TOOLCHAIN_GNU_EABIW is not set
+# CONFIG_ARMV7M_TOOLCHAIN_RAISONANCE is not set
+# CONFIG_SERIAL_TERMIOS is not set
+
+#
+# STM32 Configuration Options
+#
+# CONFIG_ARCH_CHIP_STM32L151C6 is not set
+# CONFIG_ARCH_CHIP_STM32L151C8 is not set
+# CONFIG_ARCH_CHIP_STM32L151CB is not set
+# CONFIG_ARCH_CHIP_STM32L151R6 is not set
+# CONFIG_ARCH_CHIP_STM32L151R8 is not set
+# CONFIG_ARCH_CHIP_STM32L151RB is not set
+# CONFIG_ARCH_CHIP_STM32L151V6 is not set
+# CONFIG_ARCH_CHIP_STM32L151V8 is not set
+# CONFIG_ARCH_CHIP_STM32L151VB is not set
+# CONFIG_ARCH_CHIP_STM32L152C6 is not set
+# CONFIG_ARCH_CHIP_STM32L152C8 is not set
+# CONFIG_ARCH_CHIP_STM32L152CB is not set
+# CONFIG_ARCH_CHIP_STM32L152R6 is not set
+# CONFIG_ARCH_CHIP_STM32L152R8 is not set
+# CONFIG_ARCH_CHIP_STM32L152RB is not set
+# CONFIG_ARCH_CHIP_STM32L152V6 is not set
+# CONFIG_ARCH_CHIP_STM32L152V8 is not set
+# CONFIG_ARCH_CHIP_STM32L152VB is not set
+# CONFIG_ARCH_CHIP_STM32F100C8 is not set
+# CONFIG_ARCH_CHIP_STM32F100CB is not set
+# CONFIG_ARCH_CHIP_STM32F100R8 is not set
+# CONFIG_ARCH_CHIP_STM32F100RB is not set
+# CONFIG_ARCH_CHIP_STM32F100RC is not set
+# CONFIG_ARCH_CHIP_STM32F100RD is not set
+# CONFIG_ARCH_CHIP_STM32F100RE is not set
+# CONFIG_ARCH_CHIP_STM32F100V8 is not set
+# CONFIG_ARCH_CHIP_STM32F100VB is not set
+# CONFIG_ARCH_CHIP_STM32F100VC is not set
+# CONFIG_ARCH_CHIP_STM32F100VD is not set
+# CONFIG_ARCH_CHIP_STM32F100VE is not set
+# CONFIG_ARCH_CHIP_STM32F103C4 is not set
+# CONFIG_ARCH_CHIP_STM32F103C8 is not set
+# CONFIG_ARCH_CHIP_STM32F103T8 is not set
+# CONFIG_ARCH_CHIP_STM32F103TB is not set
+# CONFIG_ARCH_CHIP_STM32F103CB is not set
+# CONFIG_ARCH_CHIP_STM32F103R8 is not set
+# CONFIG_ARCH_CHIP_STM32F103RB is not set
+# CONFIG_ARCH_CHIP_STM32F103V8 is not set
+# CONFIG_ARCH_CHIP_STM32F103VB is not set
+# CONFIG_ARCH_CHIP_STM32F103RE is not set
+# CONFIG_ARCH_CHIP_STM32F103VC is not set
+# CONFIG_ARCH_CHIP_STM32F103VE is not set
+# CONFIG_ARCH_CHIP_STM32F103ZE is not set
+# CONFIG_ARCH_CHIP_STM32F105VB is not set
+# CONFIG_ARCH_CHIP_STM32F107VC is not set
+# CONFIG_ARCH_CHIP_STM32F207IG is not set
+# CONFIG_ARCH_CHIP_STM32F207ZE is not set
+# CONFIG_ARCH_CHIP_STM32F302CB is not set
+# CONFIG_ARCH_CHIP_STM32F302CC is not set
+# CONFIG_ARCH_CHIP_STM32F302RB is not set
+# CONFIG_ARCH_CHIP_STM32F302RC is not set
+# CONFIG_ARCH_CHIP_STM32F302VB is not set
+# CONFIG_ARCH_CHIP_STM32F302VC is not set
+# CONFIG_ARCH_CHIP_STM32F303CB is not set
+# CONFIG_ARCH_CHIP_STM32F303CC is not set
+# CONFIG_ARCH_CHIP_STM32F303RB is not set
+# CONFIG_ARCH_CHIP_STM32F303RC is not set
+# CONFIG_ARCH_CHIP_STM32F303VB is not set
+# CONFIG_ARCH_CHIP_STM32F303VC is not set
+# CONFIG_ARCH_CHIP_STM32F405RG is not set
+# CONFIG_ARCH_CHIP_STM32F405VG is not set
+# CONFIG_ARCH_CHIP_STM32F405ZG is not set
+# CONFIG_ARCH_CHIP_STM32F407VE is not set
+CONFIG_ARCH_CHIP_STM32F407VG=y
+# CONFIG_ARCH_CHIP_STM32F407ZE is not set
+# CONFIG_ARCH_CHIP_STM32F407ZG is not set
+# CONFIG_ARCH_CHIP_STM32F407IE is not set
+# CONFIG_ARCH_CHIP_STM32F407IG is not set
+# CONFIG_ARCH_CHIP_STM32F427V is not set
+# CONFIG_ARCH_CHIP_STM32F427Z is not set
+# CONFIG_ARCH_CHIP_STM32F427I is not set
+# CONFIG_ARCH_CHIP_STM32F429V is not set
+# CONFIG_ARCH_CHIP_STM32F429Z is not set
+# CONFIG_ARCH_CHIP_STM32F429I is not set
+# CONFIG_ARCH_CHIP_STM32F429B is not set
+# CONFIG_ARCH_CHIP_STM32F429N is not set
+# CONFIG_STM32_STM32L15XX is not set
+# CONFIG_STM32_ENERGYLITE is not set
+# CONFIG_STM32_STM32F10XX is not set
+# CONFIG_STM32_VALUELINE is not set
+# CONFIG_STM32_CONNECTIVITYLINE is not set
+# CONFIG_STM32_PERFORMANCELINE is not set
+# CONFIG_STM32_HIGHDENSITY is not set
+# CONFIG_STM32_MEDIUMDENSITY is not set
+# CONFIG_STM32_LOWDENSITY is not set
+# CONFIG_STM32_STM32F20XX is not set
+# CONFIG_STM32_STM32F30XX is not set
+CONFIG_STM32_STM32F40XX=y
+# CONFIG_STM32_DFU is not set
+
+#
+# STM32 Peripheral Support
+#
+# CONFIG_STM32_HAVE_USBDEV is not set
+CONFIG_STM32_HAVE_OTGFS=y
+# CONFIG_STM32_ADC1 is not set
+# CONFIG_STM32_ADC2 is not set
+# CONFIG_STM32_ADC3 is not set
+# CONFIG_STM32_BKPSRAM is not set
+# CONFIG_STM32_CAN1 is not set
+# CONFIG_STM32_CAN2 is not set
+# CONFIG_STM32_CCMDATARAM is not set
+# CONFIG_STM32_CRC is not set
+# CONFIG_STM32_CRYP is not set
+# CONFIG_STM32_DMA1 is not set
+# CONFIG_STM32_DMA2 is not set
+# CONFIG_STM32_DAC1 is not set
+# CONFIG_STM32_DAC2 is not set
+# CONFIG_STM32_DCMI is not set
+# CONFIG_STM32_ETHMAC is not set
+# CONFIG_STM32_FSMC is not set
+# CONFIG_STM32_HASH is not set
+# CONFIG_STM32_I2C1 is not set
+# CONFIG_STM32_I2C2 is not set
+# CONFIG_STM32_I2C3 is not set
+# CONFIG_STM32_OTGFS is not set
+# CONFIG_STM32_OTGHS is not set
+# CONFIG_STM32_PWR is not set
+# CONFIG_STM32_RNG is not set
+# CONFIG_STM32_SDIO is not set
+# CONFIG_STM32_SPI1 is not set
+# CONFIG_STM32_SPI2 is not set
+# CONFIG_STM32_SPI3 is not set
+CONFIG_STM32_SYSCFG=y
+# CONFIG_STM32_TIM1 is not set
+# CONFIG_STM32_TIM2 is not set
+# CONFIG_STM32_TIM3 is not set
+# CONFIG_STM32_TIM4 is not set
+# CONFIG_STM32_TIM5 is not set
+# CONFIG_STM32_TIM6 is not set
+# CONFIG_STM32_TIM7 is not set
+# CONFIG_STM32_TIM8 is not set
+# CONFIG_STM32_TIM9 is not set
+# CONFIG_STM32_TIM10 is not set
+# CONFIG_STM32_TIM11 is not set
+# CONFIG_STM32_TIM12 is not set
+# CONFIG_STM32_TIM13 is not set
+# CONFIG_STM32_TIM14 is not set
+# CONFIG_STM32_USART1 is not set
+CONFIG_STM32_USART2=y
+# CONFIG_STM32_USART3 is not set
+# CONFIG_STM32_UART4 is not set
+# CONFIG_STM32_UART5 is not set
+# CONFIG_STM32_USART6 is not set
+# CONFIG_STM32_IWDG is not set
+# CONFIG_STM32_WWDG is not set
+
+#
+# Alternate Pin Mapping
+#
+# CONFIG_STM32_FLASH_PREFETCH is not set
+# CONFIG_STM32_JTAG_DISABLE is not set
+# CONFIG_STM32_JTAG_FULL_ENABLE is not set
+# CONFIG_STM32_JTAG_NOJNTRST_ENABLE is not set
+CONFIG_STM32_JTAG_SW_ENABLE=y
+# CONFIG_STM32_DISABLE_IDLE_SLEEP_DURING_DEBUG is not set
+# CONFIG_STM32_FORCEPOWER is not set
+# CONFIG_ARCH_BOARD_STM32_CUSTOM_CLOCKCONFIG is not set
+CONFIG_STM32_CCMEXCLUDE=y
+CONFIG_STM32_USART=y
+
+#
+# U[S]ART Configuration
+#
+# CONFIG_USART2_RS485 is not set
+# CONFIG_SERIAL_DISABLE_REORDERING is not set
+# CONFIG_STM32_USART_SINGLEWIRE is not set
+
+#
+# USB Host Configuration
+#
+
+#
+# USB Device Configuration
+#
+
+#
+# Architecture Options
+#
+# CONFIG_ARCH_NOINTC is not set
+# CONFIG_ARCH_VECNOTIRQ is not set
+# CONFIG_ARCH_DMA is not set
+CONFIG_ARCH_HAVE_IRQPRIO=y
+# CONFIG_ARCH_ADDRENV is not set
+CONFIG_ARCH_HAVE_VFORK=y
+# CONFIG_ARCH_HAVE_MMU is not set
+# CONFIG_ARCH_NAND_HWECC is not set
+# CONFIG_ARCH_IRQPRIO is not set
+CONFIG_ARCH_STACKDUMP=y
+# CONFIG_ENDIAN_BIG is not set
+# CONFIG_ARCH_IDLE_CUSTOM is not set
+# CONFIG_ARCH_HAVE_RAMFUNCS is not set
+CONFIG_ARCH_HAVE_RAMVECTORS=y
+# CONFIG_ARCH_RAMVECTORS is not set
+
+#
+# Board Settings
+#
+CONFIG_BOARD_LOOPSPERMSEC=16717
+# CONFIG_ARCH_CALIBRATION is not set
+
+#
+# Interrupt options
+#
+CONFIG_ARCH_HAVE_INTERRUPTSTACK=y
+CONFIG_ARCH_INTERRUPTSTACK=0
+CONFIG_ARCH_HAVE_HIPRI_INTERRUPT=y
+# CONFIG_ARCH_HIPRI_INTERRUPT is not set
+
+#
+# Boot options
+#
+# CONFIG_BOOT_RUNFROMEXTSRAM is not set
+CONFIG_BOOT_RUNFROMFLASH=y
+# CONFIG_BOOT_RUNFROMISRAM is not set
+# CONFIG_BOOT_RUNFROMSDRAM is not set
+# CONFIG_BOOT_COPYTORAM is not set
+
+#
+# Boot Memory Configuration
+#
+CONFIG_RAM_START=0x20000000
+CONFIG_RAM_SIZE=114688
+# CONFIG_ARCH_HAVE_SDRAM is not set
+
+#
+# Board Selection
+#
+CONFIG_ARCH_BOARD_STM32F4_DISCOVERY=y
+# CONFIG_ARCH_BOARD_MIKROE_STM32F4 is not set
+# CONFIG_ARCH_BOARD_CUSTOM is not set
+CONFIG_ARCH_BOARD="stm32f4discovery"
+
+#
+# Common Board Options
+#
+CONFIG_ARCH_HAVE_LEDS=y
+CONFIG_ARCH_LEDS=y
+CONFIG_ARCH_HAVE_BUTTONS=y
+# CONFIG_ARCH_BUTTONS is not set
+CONFIG_ARCH_HAVE_IRQBUTTONS=y
+
+#
+# Board-Specific Options
+#
+
+#
+# RTOS Features
+#
+# CONFIG_BOARD_INITIALIZE is not set
+CONFIG_USEC_PER_TICK=10000
+# CONFIG_SYSTEM_TIME64 is not set
+CONFIG_RR_INTERVAL=200
+# CONFIG_SCHED_CPULOAD is not set
+# CONFIG_SCHED_INSTRUMENTATION is not set
+CONFIG_TASK_NAME_SIZE=0
+# CONFIG_SCHED_HAVE_PARENT is not set
+# CONFIG_JULIAN_TIME is not set
+CONFIG_START_YEAR=2012
+CONFIG_START_MONTH=10
+CONFIG_START_DAY=26
+CONFIG_DEV_CONSOLE=y
+# CONFIG_MUTEX_TYPES is not set
+# CONFIG_PRIORITY_INHERITANCE is not set
+# CONFIG_FDCLONE_DISABLE is not set
+# CONFIG_FDCLONE_STDIO is not set
+CONFIG_SDCLONE_DISABLE=y
+# CONFIG_SCHED_WAITPID is not set
+CONFIG_SCHED_STARTHOOK=y
+# CONFIG_SCHED_ATEXIT is not set
+# CONFIG_SCHED_ONEXIT is not set
+CONFIG_USER_ENTRYPOINT="elf_main"
+CONFIG_DISABLE_OS_API=y
+# CONFIG_DISABLE_POSIX_TIMERS is not set
+# CONFIG_DISABLE_PTHREAD is not set
+# CONFIG_DISABLE_SIGNALS is not set
+# CONFIG_DISABLE_MQUEUE is not set
+# CONFIG_DISABLE_ENVIRON is not set
+
+#
+# Signal Numbers
+#
+CONFIG_SIG_SIGUSR1=1
+CONFIG_SIG_SIGUSR2=2
+CONFIG_SIG_SIGALARM=3
+CONFIG_SIG_SIGCONDTIMEDOUT=16
+
+#
+# Sizes of configurable things (0 disables)
+#
+CONFIG_MAX_TASKS=16
+CONFIG_MAX_TASK_ARGS=4
+CONFIG_NPTHREAD_KEYS=4
+CONFIG_NFILE_DESCRIPTORS=8
+CONFIG_NFILE_STREAMS=8
+CONFIG_NAME_MAX=32
+CONFIG_PREALLOC_MQ_MSGS=4
+CONFIG_MQ_MAXMSGSIZE=32
+CONFIG_MAX_WDOGPARMS=2
+CONFIG_PREALLOC_WDOGS=4
+CONFIG_WDOG_INTRESERVE=0
+CONFIG_PREALLOC_TIMERS=4
+
+#
+# Stack and heap information
+#
+CONFIG_IDLETHREAD_STACKSIZE=1024
+CONFIG_USERMAIN_STACKSIZE=2048
+CONFIG_PTHREAD_STACK_MIN=256
+CONFIG_PTHREAD_STACK_DEFAULT=2048
+
+#
+# Device Drivers
+#
+# CONFIG_DISABLE_POLL is not set
+CONFIG_DEV_NULL=y
+# CONFIG_DEV_ZERO is not set
+# CONFIG_LOOP is not set
+# CONFIG_RAMDISK is not set
+# CONFIG_CAN is not set
+# CONFIG_ARCH_HAVE_PWM_PULSECOUNT is not set
+# CONFIG_PWM is not set
+CONFIG_ARCH_HAVE_I2CRESET=y
+# CONFIG_I2C is not set
+# CONFIG_SPI is not set
+# CONFIG_I2S is not set
+# CONFIG_RTC is not set
+# CONFIG_WATCHDOG is not set
+# CONFIG_ANALOG is not set
+# CONFIG_AUDIO_DEVICES is not set
+# CONFIG_VIDEO_DEVICES is not set
+# CONFIG_BCH is not set
+# CONFIG_INPUT is not set
+# CONFIG_LCD is not set
+# CONFIG_MMCSD is not set
+# CONFIG_MTD is not set
+# CONFIG_PIPES is not set
+# CONFIG_PM is not set
+# CONFIG_POWER is not set
+# CONFIG_SENSORS is not set
+# CONFIG_SERCOMM_CONSOLE is not set
+CONFIG_SERIAL=y
+CONFIG_DEV_LOWCONSOLE=y
+# CONFIG_16550_UART is not set
+# CONFIG_ARCH_HAVE_UART is not set
+# CONFIG_ARCH_HAVE_UART0 is not set
+# CONFIG_ARCH_HAVE_UART1 is not set
+# CONFIG_ARCH_HAVE_UART2 is not set
+# CONFIG_ARCH_HAVE_UART3 is not set
+# CONFIG_ARCH_HAVE_UART4 is not set
+# CONFIG_ARCH_HAVE_UART5 is not set
+# CONFIG_ARCH_HAVE_UART6 is not set
+# CONFIG_ARCH_HAVE_UART7 is not set
+# CONFIG_ARCH_HAVE_UART8 is not set
+# CONFIG_ARCH_HAVE_SCI0 is not set
+# CONFIG_ARCH_HAVE_SCI1 is not set
+# CONFIG_ARCH_HAVE_USART0 is not set
+# CONFIG_ARCH_HAVE_USART1 is not set
+CONFIG_ARCH_HAVE_USART2=y
+# CONFIG_ARCH_HAVE_USART3 is not set
+# CONFIG_ARCH_HAVE_USART4 is not set
+# CONFIG_ARCH_HAVE_USART5 is not set
+# CONFIG_ARCH_HAVE_USART6 is not set
+# CONFIG_ARCH_HAVE_USART7 is not set
+# CONFIG_ARCH_HAVE_USART8 is not set
+
+#
+# USART Configuration
+#
+CONFIG_USART2_ISUART=y
+CONFIG_MCU_SERIAL=y
+CONFIG_USART2_SERIAL_CONSOLE=y
+# CONFIG_NO_SERIAL_CONSOLE is not set
+
+#
+# USART2 Configuration
+#
+CONFIG_USART2_RXBUFSIZE=128
+CONFIG_USART2_TXBUFSIZE=128
+CONFIG_USART2_BAUD=115200
+CONFIG_USART2_BITS=8
+CONFIG_USART2_PARITY=0
+CONFIG_USART2_2STOP=0
+# CONFIG_USART2_IFLOWCONTROL is not set
+# CONFIG_USART2_OFLOWCONTROL is not set
+# CONFIG_SERIAL_IFLOWCONTROL is not set
+# CONFIG_SERIAL_OFLOWCONTROL is not set
+# CONFIG_USBDEV is not set
+# CONFIG_USBHOST is not set
+# CONFIG_WIRELESS is not set
+
+#
+# System Logging Device Options
+#
+
+#
+# System Logging
+#
+# CONFIG_RAMLOG is not set
+
+#
+# Networking Support
+#
+# CONFIG_ARCH_HAVE_NET is not set
+# CONFIG_ARCH_HAVE_PHY is not set
+# CONFIG_NET is not set
+
+#
+# File Systems
+#
+
+#
+# File system configuration
+#
+# CONFIG_DISABLE_MOUNTPOINT is not set
+# CONFIG_DISABLE_PSEUDOFS_OPERATIONS is not set
+CONFIG_FS_READABLE=y
+# CONFIG_FS_WRITABLE is not set
+# CONFIG_FS_RAMMAP is not set
+# CONFIG_FS_FAT is not set
+# CONFIG_FS_NXFFS is not set
+CONFIG_FS_ROMFS=y
+# CONFIG_FS_SMARTFS is not set
+# CONFIG_FS_PROCFS is not set
+
+#
+# System Logging
+#
+
+# CONFIG_SYSLOG is not set
+
+#
+# Graphics Support
+#
+# CONFIG_NX is not set
+
+#
+# Memory Management
+#
+# CONFIG_MM_SMALL is not set
+CONFIG_MM_REGIONS=2
+# CONFIG_ARCH_HAVE_HEAP2 is not set
+# CONFIG_GRAN is not set
+
+#
+# Audio Support
+#
+# CONFIG_AUDIO is not set
+
+#
+# Binary Formats
+#
+# CONFIG_BINFMT_DISABLE is not set
+CONFIG_BINFMT_EXEPATH=y
+CONFIG_PATH_INITIAL="/mnt/romfs"
+# CONFIG_NXFLAT is not set
+CONFIG_ELF=y
+CONFIG_ELF_ALIGN_LOG2=2
+CONFIG_ELF_STACKSIZE=2048
+CONFIG_ELF_BUFFERSIZE=128
+CONFIG_ELF_BUFFERINCR=32
+# CONFIG_BUILTIN is not set
+# CONFIG_PIC is not set
+CONFIG_BINFMT_CONSTRUCTORS=y
+CONFIG_SYMTAB_ORDEREDBYNAME=y
+
+#
+# Library Routines
+#
+
+#
+# Standard C Library Options
+#
+CONFIG_STDIO_BUFFER_SIZE=64
+CONFIG_STDIO_LINEBUFFER=y
+CONFIG_NUNGET_CHARS=2
+CONFIG_LIB_HOMEDIR="/"
+# CONFIG_LIBM is not set
+# CONFIG_NOPRINTF_FIELDWIDTH is not set
+# CONFIG_LIBC_FLOATINGPOINT is not set
+CONFIG_LIB_RAND_ORDER=1
+# CONFIG_EOL_IS_CR is not set
+# CONFIG_EOL_IS_LF is not set
+# CONFIG_EOL_IS_BOTH_CRLF is not set
+CONFIG_EOL_IS_EITHER_CRLF=y
+# CONFIG_LIBC_EXECFUNCS is not set
+CONFIG_POSIX_SPAWN_PROXY_STACKSIZE=1024
+CONFIG_TASK_SPAWN_DEFAULT_STACKSIZE=2048
+# CONFIG_LIBC_STRERROR is not set
+# CONFIG_LIBC_PERROR_STDOUT is not set
+CONFIG_ARCH_LOWPUTC=y
+CONFIG_LIB_SENDFILE_BUFSIZE=512
+# CONFIG_ARCH_ROMGETC is not set
+# CONFIG_ARCH_OPTIMIZED_FUNCTIONS is not set
+
+#
+# Non-standard Library Support
+#
+# CONFIG_SCHED_WORKQUEUE is not set
+# CONFIG_LIB_KBDCODEC is not set
+# CONFIG_LIB_SLCDCODEC is not set
+
+#
+# Basic CXX Support
+#
+# CONFIG_C99_BOOL8 is not set
+CONFIG_HAVE_CXX=y
+# CONFIG_HAVE_CXXINITIALIZE is not set
+# CONFIG_CXX_NEWLONG is not set
+
+#
+# uClibc++ Standard C++ Library
+#
+# CONFIG_UCLIBCXX is not set
+
+#
+# Application Configuration
+#
+
+#
+# Built-In Applications
+#
+
+#
+# Examples
+#
+# CONFIG_EXAMPLES_BUTTONS is not set
+# CONFIG_EXAMPLES_CAN is not set
+# CONFIG_EXAMPLES_CONFIGDATA is not set
+# CONFIG_EXAMPLES_CXXTEST is not set
+# CONFIG_EXAMPLES_DHCPD is not set
+CONFIG_EXAMPLES_ELF=y
+CONFIG_EXAMPLES_ELF_DEVMINOR=0
+CONFIG_EXAMPLES_ELF_DEVPATH="/dev/ram0"
+# CONFIG_EXAMPLES_FTPC is not set
+# CONFIG_EXAMPLES_FTPD is not set
+# CONFIG_EXAMPLES_HELLO is not set
+# CONFIG_EXAMPLES_HELLOXX is not set
+# CONFIG_EXAMPLES_JSON is not set
+# CONFIG_EXAMPLES_HIDKBD is not set
+# CONFIG_EXAMPLES_KEYPADTEST is not set
+# CONFIG_EXAMPLES_IGMP is not set
+# CONFIG_EXAMPLES_LCDRW is not set
+# CONFIG_EXAMPLES_MM is not set
+# CONFIG_EXAMPLES_MODBUS is not set
+# CONFIG_EXAMPLES_MOUNT is not set
+# CONFIG_EXAMPLES_NRF24L01TERM is not set
+# CONFIG_EXAMPLES_NSH is not set
+# CONFIG_EXAMPLES_NULL is not set
+# CONFIG_EXAMPLES_NX is not set
+# CONFIG_EXAMPLES_NXTERM is not set
+# CONFIG_EXAMPLES_NXFFS is not set
+# CONFIG_EXAMPLES_NXFLAT is not set
+# CONFIG_EXAMPLES_NXHELLO is not set
+# CONFIG_EXAMPLES_NXIMAGE is not set
+# CONFIG_EXAMPLES_NXLINES is not set
+# CONFIG_EXAMPLES_NXTEXT is not set
+# CONFIG_EXAMPLES_OSTEST is not set
+# CONFIG_EXAMPLES_PASHELLO is not set
+# CONFIG_EXAMPLES_PIPE is not set
+# CONFIG_EXAMPLES_POLL is not set
+# CONFIG_EXAMPLES_POSIXSPAWN is not set
+# CONFIG_EXAMPLES_QENCODER is not set
+# CONFIG_EXAMPLES_RGMP is not set
+# CONFIG_EXAMPLES_ROMFS is not set
+# CONFIG_EXAMPLES_SENDMAIL is not set
+# CONFIG_EXAMPLES_SERLOOP is not set
+# CONFIG_EXAMPLES_SLCD is not set
+# CONFIG_EXAMPLES_SMART is not set
+# CONFIG_EXAMPLES_TCPECHO is not set
+# CONFIG_EXAMPLES_TELNETD is not set
+# CONFIG_EXAMPLES_THTTPD is not set
+# CONFIG_EXAMPLES_TIFF is not set
+# CONFIG_EXAMPLES_TOUCHSCREEN is not set
+# CONFIG_EXAMPLES_UDP is not set
+# CONFIG_EXAMPLES_WEBSERVER is not set
+# CONFIG_EXAMPLES_USBSERIAL is not set
+# CONFIG_EXAMPLES_USBTERM is not set
+# CONFIG_EXAMPLES_WATCHDOG is not set
+
+#
+# Graphics Support
+#
+# CONFIG_TIFF is not set
+
+#
+# Interpreters
+#
+# CONFIG_INTERPRETERS_FICL is not set
+# CONFIG_INTERPRETERS_PCODE is not set
+
+#
+# Network Utilities
+#
+
+#
+# Networking Utilities
+#
+# CONFIG_NETUTILS_CODECS is not set
+# CONFIG_NETUTILS_DHCPD is not set
+# CONFIG_NETUTILS_FTPC is not set
+# CONFIG_NETUTILS_FTPD is not set
+# CONFIG_NETUTILS_JSON is not set
+# CONFIG_NETUTILS_SMTP is not set
+# CONFIG_NETUTILS_TFTPC is not set
+# CONFIG_NETUTILS_THTTPD is not set
+# CONFIG_NETUTILS_NETLIB is not set
+# CONFIG_NETUTILS_WEBCLIENT is not set
+
+#
+# FreeModBus
+#
+# CONFIG_MODBUS is not set
+
+#
+# NSH Library
+#
+# CONFIG_NSH_LIBRARY is not set
+
+#
+# NxWidgets/NxWM
+#
+
+#
+# Platform-specific Support
+#
+# CONFIG_PLATFORM_CONFIGDATA is not set
+
+#
+# System Libraries and NSH Add-Ons
+#
+
+#
+# USB CDC/ACM Device Commands
+#
+
+#
+# USB Composite Device Commands
+#
+
+#
+# Custom Free Memory Command
+#
+# CONFIG_SYSTEM_FREE is not set
+
+#
+# I2C tool
+#
+
+#
+# INI File Parser
+#
+# CONFIG_SYSTEM_INIFILE is not set
+
+#
+# FLASH Program Installation
+#
+# CONFIG_SYSTEM_INSTALL is not set
+
+#
+# FLASH Erase-all Command
+#
+
+#
+# NxPlayer media player library / command Line
+#
+# CONFIG_SYSTEM_NXPLAYER is not set
+
+#
+# RAM test
+#
+# CONFIG_SYSTEM_RAMTEST is not set
+
+#
+# readline()
+#
+# CONFIG_SYSTEM_READLINE is not set
+
+#
+# Power Off
+#
+# CONFIG_SYSTEM_POWEROFF is not set
+
+#
+# RAMTRON
+#
+# CONFIG_SYSTEM_RAMTRON is not set
+
+#
+# SD Card
+#
+# CONFIG_SYSTEM_SDCARD is not set
+
+#
+# Sysinfo
+#
+# CONFIG_SYSTEM_SYSINFO is not set
+
+#
+# USB Monitor
+#
+
+#
+# EMACS-like Command Line Editor
+#
+# CONFIG_SYSTEM_CLE is not set
+
+#
+# VI Work-Alike Editor
+#
+# CONFIG_SYSTEM_VI is not set
+
+#
+# Stack Monitor
+#
+
+#
+# USB Mass Storage Device Commands
+#
+
+#
+# Zmodem Commands
+#
+# CONFIG_SYSTEM_ZMODEM is not set
diff --git a/nuttx/configs/px4fmu-v2/elf/setenv.sh b/nuttx/configs/px4fmu-v2/elf/setenv.sh
new file mode 100755
index 000000000..921352970
--- /dev/null
+++ b/nuttx/configs/px4fmu-v2/elf/setenv.sh
@@ -0,0 +1,80 @@
+#!/bin/bash
+# configs/stm32f4discovery/elf/setenv.sh
+#
+#   Copyright (C) 2011-2012 Gregory Nutt. All rights reserved.
+#   Author: Gregory Nutt <gnutt@nuttx.org>
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions
+# are met:
+#
+# 1. Redistributions of source code must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+# 2. Redistributions in binary form must reproduce the above copyright
+#    notice, this list of conditions and the following disclaimer in
+#    the documentation and/or other materials provided with the
+#    distribution.
+# 3. Neither the name NuttX nor the names of its contributors may be
+#    used to endorse or promote products derived from this software
+#    without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+#
+
+if [ "$_" = "$0" ] ; then
+  echo "You must source this script, not run it!" 1>&2
+  exit 1
+fi
+
+WD=`pwd`
+if [ ! -x "setenv.sh" ]; then
+  echo "This script must be executed from the top-level NuttX build directory"
+  exit 1
+fi
+
+if [ -z "${PATH_ORIG}" ]; then
+  export PATH_ORIG="${PATH}"
+fi
+
+# This is the Cygwin path to the location where I installed the RIDE
+# toolchain under windows.  You will also have to edit this if you install
+# the RIDE toolchain in any other location
+#export TOOLCHAIN_BIN="/cygdrive/c/Program Files (x86)/Raisonance/Ride/arm-gcc/bin"
+
+# This is the Cygwin path to the location where I installed the CodeSourcery
+# toolchain under windows.  You will also have to edit this if you install
+# the CodeSourcery toolchain in any other location
+export TOOLCHAIN_BIN="/cygdrive/c/Program Files (x86)/CodeSourcery/Sourcery G++ Lite/bin"
+#export TOOLCHAIN_BIN="/cygdrive/c/Users/MyName/MentorGraphics/Sourcery_CodeBench_Lite_for_ARM_EABI/bin"
+
+# These are the Cygwin paths to the locations where I installed the Atollic
+# toolchain under windows.  You will also have to edit this if you install
+# the Atollic toolchain in any other location.  /usr/bin is added before
+# the Atollic bin path because there is are binaries named gcc.exe and g++.exe
+# at those locations as well.
+#export TOOLCHAIN_BIN="/usr/bin:/cygdrive/c/Program Files (x86)/Atollic/TrueSTUDIO for ARM Pro 2.3.0/ARMTools/bin"
+#export TOOLCHAIN_BIN="/usr/bin:/cygdrive/c/Program Files (x86)/Atollic/TrueSTUDIO for STMicroelectronics STM32 Lite 2.3.0/ARMTools/bin"
+
+# This is the Cygwin path to the location where I build the buildroot
+# toolchain.
+#export TOOLCHAIN_BIN="${WD}/../misc/buildroot/build_arm_nofpu/staging_dir/bin"
+
+# This the Cygwin path to the location where I built genromfs.  If you use
+# the buildroot toolchain, then genromfs can probably be found in TOOLCHAIN_DIR
+export GENROMFS_PATH="${WD}/../misc/buildroot/build_arm_nofpu/staging_dir/bin"
+
+# Add the path to the toolchain to the PATH varialble
+export PATH="${TOOLCHAIN_BIN}:${GENROMFS_PATH}:/sbin:/usr/sbin:${PATH_ORIG}"
+
+echo "PATH : ${PATH}"
diff --git a/nuttx/configs/px4fmu-v2/include/board.h b/nuttx/configs/px4fmu-v2/include/board.h
new file mode 100644
index 000000000..38f4b3fd2
--- /dev/null
+++ b/nuttx/configs/px4fmu-v2/include/board.h
@@ -0,0 +1,372 @@
+/************************************************************************************
+ * configs/stm32f4discovery/include/board.h
+ *
+ *   Copyright (C) 2012, 2014 Gregory Nutt. All rights reserved.
+ *   Author: Gregory Nutt <gnutt@nuttx.org>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name NuttX nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ************************************************************************************/
+
+#ifndef __CONFIG_STM32F4DISCOVERY_INCLUDE_BOARD_H
+#define __CONFIG_STM32F4DISCOVERY_INCLUDE_BOARD_H
+
+/************************************************************************************
+ * Included Files
+ ************************************************************************************/
+
+#include <nuttx/config.h>
+
+#ifndef __ASSEMBLY__
+# include <stdint.h>
+#endif
+
+#include "stm32_rcc.h"
+#include "stm32_sdio.h"
+#include "stm32.h"
+
+/************************************************************************************
+ * Definitions
+ ************************************************************************************/
+
+/* Clocking *************************************************************************/
+/* The STM32F4 Discovery board features a single 8MHz crystal.  Space is provided
+ * for a 32kHz RTC backup crystal, but it is not stuffed.
+ *
+ * This is the canonical configuration:
+ *   System Clock source           : PLL (HSE)
+ *   SYSCLK(Hz)                    : 168000000    Determined by PLL configuration
+ *   HCLK(Hz)                      : 168000000    (STM32_RCC_CFGR_HPRE)
+ *   AHB Prescaler                 : 1            (STM32_RCC_CFGR_HPRE)
+ *   APB1 Prescaler                : 4            (STM32_RCC_CFGR_PPRE1)
+ *   APB2 Prescaler                : 2            (STM32_RCC_CFGR_PPRE2)
+ *   HSE Frequency(Hz)             : 8000000      (STM32_BOARD_XTAL)
+ *   PLLM                          : 8            (STM32_PLLCFG_PLLM)
+ *   PLLN                          : 336          (STM32_PLLCFG_PLLN)
+ *   PLLP                          : 2            (STM32_PLLCFG_PLLP)
+ *   PLLQ                          : 7            (STM32_PLLCFG_PLLQ)
+ *   Main regulator output voltage : Scale1 mode  Needed for high speed SYSCLK
+ *   Flash Latency(WS)             : 5
+ *   Prefetch Buffer               : OFF
+ *   Instruction cache             : ON
+ *   Data cache                    : ON
+ *   Require 48MHz for USB OTG FS, : Enabled
+ *   SDIO and RNG clock
+ */
+
+/* HSI - 16 MHz RC factory-trimmed
+ * LSI - 32 KHz RC
+ * HSE - On-board crystal frequency is 8MHz
+ * LSE - 32.768 kHz
+ */
+
+#define STM32_BOARD_XTAL        8000000ul
+
+#define STM32_HSI_FREQUENCY     16000000ul
+#define STM32_LSI_FREQUENCY     32000
+#define STM32_HSE_FREQUENCY     STM32_BOARD_XTAL
+#define STM32_LSE_FREQUENCY     32768
+
+/* Main PLL Configuration.
+ *
+ * PLL source is HSE
+ * PLL_VCO = (STM32_HSE_FREQUENCY / PLLM) * PLLN
+ *         = (8,000,000 / 8) * 336
+ *         = 336,000,000
+ * SYSCLK  = PLL_VCO / PLLP
+ *         = 336,000,000 / 2 = 168,000,000
+ * USB OTG FS, SDIO and RNG Clock
+ *         =  PLL_VCO / PLLQ
+ *         = 48,000,000
+ */
+
+#define STM32_PLLCFG_PLLM       RCC_PLLCFG_PLLM(8)
+#define STM32_PLLCFG_PLLN       RCC_PLLCFG_PLLN(336)
+#define STM32_PLLCFG_PLLP       RCC_PLLCFG_PLLP_2
+#define STM32_PLLCFG_PLLQ       RCC_PLLCFG_PLLQ(7)
+
+#define STM32_SYSCLK_FREQUENCY  168000000ul
+
+/* AHB clock (HCLK) is SYSCLK (168MHz) */
+
+#define STM32_RCC_CFGR_HPRE     RCC_CFGR_HPRE_SYSCLK  /* HCLK  = SYSCLK / 1 */
+#define STM32_HCLK_FREQUENCY    STM32_SYSCLK_FREQUENCY
+#define STM32_BOARD_HCLK        STM32_HCLK_FREQUENCY  /* same as above, to satisfy compiler */
+
+/* APB1 clock (PCLK1) is HCLK/4 (42MHz) */
+
+#define STM32_RCC_CFGR_PPRE1    RCC_CFGR_PPRE1_HCLKd4     /* PCLK1 = HCLK / 4 */
+#define STM32_PCLK1_FREQUENCY   (STM32_HCLK_FREQUENCY/4)
+
+/* Timers driven from APB1 will be twice PCLK1 */
+
+#define STM32_APB1_TIM2_CLKIN   (2*STM32_PCLK1_FREQUENCY)
+#define STM32_APB1_TIM3_CLKIN   (2*STM32_PCLK1_FREQUENCY)
+#define STM32_APB1_TIM4_CLKIN   (2*STM32_PCLK1_FREQUENCY)
+#define STM32_APB1_TIM5_CLKIN   (2*STM32_PCLK1_FREQUENCY)
+#define STM32_APB1_TIM6_CLKIN   (2*STM32_PCLK1_FREQUENCY)
+#define STM32_APB1_TIM7_CLKIN   (2*STM32_PCLK1_FREQUENCY)
+#define STM32_APB1_TIM12_CLKIN  (2*STM32_PCLK1_FREQUENCY)
+#define STM32_APB1_TIM13_CLKIN  (2*STM32_PCLK1_FREQUENCY)
+#define STM32_APB1_TIM14_CLKIN  (2*STM32_PCLK1_FREQUENCY)
+
+/* APB2 clock (PCLK2) is HCLK/2 (84MHz) */
+
+#define STM32_RCC_CFGR_PPRE2    RCC_CFGR_PPRE2_HCLKd2     /* PCLK2 = HCLK / 2 */
+#define STM32_PCLK2_FREQUENCY   (STM32_HCLK_FREQUENCY/2)
+
+/* Timers driven from APB2 will be twice PCLK2 */
+
+#define STM32_APB2_TIM1_CLKIN   (2*STM32_PCLK2_FREQUENCY)
+#define STM32_APB2_TIM8_CLKIN   (2*STM32_PCLK2_FREQUENCY)
+#define STM32_APB2_TIM9_CLKIN   (2*STM32_PCLK2_FREQUENCY)
+#define STM32_APB2_TIM10_CLKIN  (2*STM32_PCLK2_FREQUENCY)
+#define STM32_APB2_TIM11_CLKIN  (2*STM32_PCLK2_FREQUENCY)
+
+/* Timer Frequencies, if APBx is set to 1, frequency is same to APBx
+ * otherwise frequency is 2xAPBx.
+ * Note: TIM1,8 are on APB2, others on APB1
+ */
+
+#define STM32_TIM18_FREQUENCY   STM32_HCLK_FREQUENCY
+#define STM32_TIM27_FREQUENCY   (STM32_HCLK_FREQUENCY/2)
+
+/* SDIO dividers.  Note that slower clocking is required when DMA is disabled
+ * in order to avoid RX overrun/TX underrun errors due to delayed responses
+ * to service FIFOs in interrupt driven mode.  These values have not been
+ * tuned!!!
+ *
+ * SDIOCLK=48MHz, SDIO_CK=SDIOCLK/(118+2)=400 KHz
+ */
+
+#define SDIO_INIT_CLKDIV        (118 << SDIO_CLKCR_CLKDIV_SHIFT)
+
+/* DMA ON:  SDIOCLK=48MHz, SDIO_CK=SDIOCLK/(1+2)=16 MHz
+ * DMA OFF: SDIOCLK=48MHz, SDIO_CK=SDIOCLK/(2+2)=12 MHz
+ */
+
+#ifdef CONFIG_SDIO_DMA
+#  define SDIO_MMCXFR_CLKDIV    (1 << SDIO_CLKCR_CLKDIV_SHIFT)
+#else
+#  define SDIO_MMCXFR_CLKDIV    (2 << SDIO_CLKCR_CLKDIV_SHIFT)
+#endif
+
+/* DMA ON:  SDIOCLK=48MHz, SDIO_CK=SDIOCLK/(1+2)=16 MHz
+ * DMA OFF: SDIOCLK=48MHz, SDIO_CK=SDIOCLK/(2+2)=12 MHz
+ */
+
+#ifdef CONFIG_SDIO_DMA
+#  define SDIO_SDXFR_CLKDIV     (1 << SDIO_CLKCR_CLKDIV_SHIFT)
+#else
+#  define SDIO_SDXFR_CLKDIV     (2 << SDIO_CLKCR_CLKDIV_SHIFT)
+#endif
+
+/* LED definitions ******************************************************************/
+/* If CONFIG_ARCH_LEDS is not defined, then the user can control the LEDs in any
+ * way.  The following definitions are used to access individual LEDs.
+ */
+
+/* LED index values for use with stm32_setled() */
+
+#define BOARD_LED1        0
+#define BOARD_LED2        1
+#define BOARD_LED3        2
+#define BOARD_LED4        3
+#define BOARD_NLEDS       4
+
+#define BOARD_LED_GREEN   BOARD_LED1
+#define BOARD_LED_ORANGE  BOARD_LED2
+#define BOARD_LED_RED     BOARD_LED3
+#define BOARD_LED_BLUE    BOARD_LED4
+
+/* LED bits for use with stm32_setleds() */
+
+#define BOARD_LED1_BIT    (1 << BOARD_LED1)
+#define BOARD_LED2_BIT    (1 << BOARD_LED2)
+#define BOARD_LED3_BIT    (1 << BOARD_LED3)
+#define BOARD_LED4_BIT    (1 << BOARD_LED4)
+
+/* If CONFIG_ARCH_LEDs is defined, then NuttX will control the 4 LEDs on board the
+ * stm32f4discovery.  The following definitions describe how NuttX controls the LEDs:
+ */
+
+#define LED_STARTED       0  /* LED1 */
+#define LED_HEAPALLOCATE  1  /* LED2 */
+#define LED_IRQSENABLED   2  /* LED1 + LED2 */
+#define LED_STACKCREATED  3  /* LED3 */
+#define LED_INIRQ         4  /* LED1 + LED3 */
+#define LED_SIGNAL        5  /* LED2 + LED3 */
+#define LED_ASSERTION     6  /* LED1 + LED2 + LED3 */
+#define LED_PANIC         7  /* N/C  + N/C  + N/C + LED4 */
+
+/* Button definitions ***************************************************************/
+/* The STM32F4 Discovery supports one button: */
+
+#define BUTTON_USER        0
+
+#define NUM_BUTTONS        1
+
+#define BUTTON_USER_BIT    (1 << BUTTON_USER)
+
+/* Alternate function pin selections ************************************************/
+
+/* UART2:
+ *
+ * The STM32F4 Discovery has no on-board serial devices, but the console is
+ * brought out to PA2 (TX) and PA3 (RX) for connection to an external serial
+ * device. (See the README.txt file for other options)
+ *
+ * These pins selections, however, conflict with pin usage on the STM32F4DIS-BB.
+ */
+
+#ifndef CONFIG_STM32F4DISBB
+#  define GPIO_USART2_RX GPIO_USART2_RX_1
+#  define GPIO_USART2_TX GPIO_USART2_TX_1
+#endif
+
+/* UART6:
+ *
+ * The STM32F4DIS-BB base board provides RS-232 drivers and a DB9 connector
+ * for USART6.  This is the preferred serial console for use with the STM32F4DIS-BB.
+ */
+
+#ifdef CONFIG_STM32F4DISBB
+#  define GPIO_USART6_RX GPIO_USART6_RX_1
+#  define GPIO_USART6_TX GPIO_USART6_TX_1
+#endif
+
+/* PWM
+ *
+ * The STM32F4 Discovery has no real on-board PWM devices, but the board can be
+ * configured to output a pulse train using TIM4 CH2 on PD13.
+ */
+
+#define GPIO_TIM4_CH2OUT GPIO_TIM4_CH2OUT_2
+
+/* SPI - There is a MEMS device on SPI1 using these pins: */
+
+#define GPIO_SPI1_MISO GPIO_SPI1_MISO_1
+#define GPIO_SPI1_MOSI GPIO_SPI1_MOSI_1
+#define GPIO_SPI1_SCK  GPIO_SPI1_SCK_1
+
+/* Timer Inputs/Outputs (see the README.txt file for options) */
+
+#define GPIO_TIM2_CH1IN  GPIO_TIM2_CH1IN_2
+#define GPIO_TIM2_CH2IN  GPIO_TIM2_CH2IN_1
+
+#define GPIO_TIM8_CH1IN  GPIO_TIM8_CH1IN_1
+#define GPIO_TIM8_CH2IN  GPIO_TIM8_CH2IN_1
+
+/* Ethernet *************************************************************************/
+
+#if defined(CONFIG_STM32F4DISBB) && defined(CONFIG_STM32_ETHMAC)
+  /* RMII interface to the LAN8720 PHY */
+
+#  ifndef CONFIG_STM32_RMII
+#    error CONFIG_STM32_RMII must be defined
+#  endif
+
+  /* Clocking is provided by an external 25Mhz XTAL */
+
+#  ifndef CONFIG_STM32_RMII_EXTCLK
+#    error CONFIG_STM32_RMII_EXTCLK must be defined
+#  endif
+
+  /* Pin disambiguation */
+
+#  define GPIO_ETH_RMII_TX_EN GPIO_ETH_RMII_TX_EN_1
+#  define GPIO_ETH_RMII_TXD0  GPIO_ETH_RMII_TXD0_1
+#  define GPIO_ETH_RMII_TXD1  GPIO_ETH_RMII_TXD1_1
+#  define GPIO_ETH_PPS_OUT    GPIO_ETH_PPS_OUT_1
+
+#endif
+
+/* DMA Channl/Stream Selections *****************************************************/
+/* Stream selections are arbitrary for now but might become important in the future
+ * if we set aside more DMA channels/streams.
+ *
+ * SDIO DMA
+ *   DMAMAP_SDIO_1 = Channel 4, Stream 3
+ *   DMAMAP_SDIO_2 = Channel 4, Stream 6
+ */
+
+#define DMAMAP_SDIO DMAMAP_SDIO_1
+
+/************************************************************************************
+ * Public Data
+ ************************************************************************************/
+
+#ifndef __ASSEMBLY__
+
+#undef EXTERN
+#if defined(__cplusplus)
+#define EXTERN extern "C"
+extern "C"
+{
+#else
+#define EXTERN extern
+#endif
+
+/************************************************************************************
+ * Public Function Prototypes
+ ************************************************************************************/
+/************************************************************************************
+ * Name: stm32_boardinitialize
+ *
+ * Description:
+ *   All STM32 architectures must provide the following entry point.  This entry point
+ *   is called early in the initialization -- after all memory has been configured
+ *   and mapped but before any devices have been initialized.
+ *
+ ************************************************************************************/
+
+void stm32_boardinitialize(void);
+
+/************************************************************************************
+ * Name:  stm32_ledinit, stm32_setled, and stm32_setleds
+ *
+ * Description:
+ *   If CONFIG_ARCH_LEDS is defined, then NuttX will control the on-board LEDs.  If
+ *   CONFIG_ARCH_LEDS is not defined, then the following interfaces are available to
+ *   control the LEDs from user applications.
+ *
+ ************************************************************************************/
+
+#ifndef CONFIG_ARCH_LEDS
+void stm32_ledinit(void);
+void stm32_setled(int led, bool ledon);
+void stm32_setleds(uint8_t ledset);
+#endif
+
+#undef EXTERN
+#if defined(__cplusplus)
+}
+#endif
+
+#endif /* __ASSEMBLY__ */
+#endif  /* __CONFIG_STM32F4DISCOVERY_INCLUDE_BOARD_H */
diff --git a/nuttx/configs/px4fmu-v2/kernel/.gitignore b/nuttx/configs/px4fmu-v2/kernel/.gitignore
new file mode 100644
index 000000000..7bacd5aee
--- /dev/null
+++ b/nuttx/configs/px4fmu-v2/kernel/.gitignore
@@ -0,0 +1,2 @@
+/nuttx_user.elf
+
diff --git a/nuttx/configs/px4fmu-v2/kernel/Makefile b/nuttx/configs/px4fmu-v2/kernel/Makefile
new file mode 100644
index 000000000..67da11088
--- /dev/null
+++ b/nuttx/configs/px4fmu-v2/kernel/Makefile
@@ -0,0 +1,122 @@
+############################################################################
+# configs/stm32f4discovery/kernel/Makefile
+#
+#   Copyright (C) 2013 Gregory Nutt. All rights reserved.
+#   Author: Gregory Nutt <gnutt@nuttx.org>
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions
+# are met:
+#
+# 1. Redistributions of source code must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+# 2. Redistributions in binary form must reproduce the above copyright
+#    notice, this list of conditions and the following disclaimer in
+#    the documentation and/or other materials provided with the
+#    distribution.
+# 3. Neither the name NuttX nor the names of its contributors may be
+#    used to endorse or promote products derived from this software
+#    without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+#
+############################################################################
+
+-include $(TOPDIR)/Make.defs
+
+# This is the directory for the board-specific header files
+
+BOARD_INCLUDE = $(TOPDIR)$(DELIM)configs$(DELIM)$(CONFIG_ARCH_BOARD)$(DELIM)include
+
+# The entry point name (if none is provided in the .config file)
+
+CONFIG_USER_ENTRYPOINT ?= user_start
+ENTRYPT = $(patsubst "%",%,$(CONFIG_USER_ENTRYPOINT))
+
+# Get the paths to the libraries and the links script path in format that
+# is appropriate for the host OS
+
+ifeq ($(WINTOOL),y)
+  # Windows-native toolchains
+  USER_LIBPATHS = ${shell for path in $(USERLIBS); do dir=`dirname $(TOPDIR)$(DELIM)$$path`;echo "-L\"`cygpath -w $$dir`\"";done}
+  USER_LDSCRIPT = -T "${shell cygpath -w $(TOPDIR)$(DELIM)configs$(DELIM)$(CONFIG_ARCH_BOARD)$(DELIM)scripts$(DELIM)memory.ld}"
+  USER_LDSCRIPT += -T "${shell cygpath -w $(TOPDIR)$(DELIM)configs$(DELIM)$(CONFIG_ARCH_BOARD)$(DELIM)scripts$(DELIM)user-space.ld}"
+  USER_HEXFILE += "${shell cygpath -w $(TOPDIR)$(DELIM)nuttx_user.hex}"
+  USER_SRECFILE += "${shell cygpath -w $(TOPDIR)$(DELIM)nuttx_user.srec}"
+  USER_BINFILE += "${shell cygpath -w $(TOPDIR)$(DELIM)nuttx_user.bin}"
+else
+  # Linux/Cygwin-native toolchain
+  USER_LIBPATHS = $(addprefix -L$(TOPDIR)$(DELIM),$(dir $(USERLIBS)))
+  USER_LDSCRIPT = -T$(TOPDIR)$(DELIM)configs$(DELIM)$(CONFIG_ARCH_BOARD)$(DELIM)scripts$(DELIM)memory.ld
+  USER_LDSCRIPT += -T$(TOPDIR)$(DELIM)configs$(DELIM)$(CONFIG_ARCH_BOARD)$(DELIM)scripts$(DELIM)user-space.ld
+  USER_HEXFILE += "$(TOPDIR)$(DELIM)nuttx_user.hex"
+  USER_SRECFILE += "$(TOPDIR)$(DELIM)nuttx_user.srec"
+  USER_BINFILE += "$(TOPDIR)$(DELIM)nuttx_user.bin"
+endif
+
+USER_LDFLAGS = --undefined=$(ENTRYPT) --entry=$(ENTRYPT) $(USER_LDSCRIPT)
+USER_LDLIBS = $(patsubst lib%,-l%,$(basename $(notdir $(USERLIBS))))
+USER_LIBGCC = "${shell $(CC) -print-libgcc-file-name}"
+
+# Source files
+
+CSRCS = up_userspace.c
+COBJS = $(CSRCS:.c=$(OBJEXT))
+OBJS  = $(COBJS)
+
+# Targets:
+
+all: $(TOPDIR)$(DELIM)nuttx_user.elf $(TOPDIR)$(DELIM)User.map
+.PHONY: nuttx_user.elf depend clean distclean
+
+$(COBJS): %$(OBJEXT): %.c
+	$(call COMPILE, $<, $@)
+
+# Create the nuttx_user.elf file containing all of the user-mode code
+
+nuttx_user.elf: $(OBJS)
+	$(Q) $(LD) -o $@ $(USER_LDFLAGS) $(USER_LIBPATHS) $(OBJS) --start-group $(USER_LDLIBS) --end-group $(USER_LIBGCC)
+
+$(TOPDIR)$(DELIM)nuttx_user.elf: nuttx_user.elf
+	@echo "LD: nuttx_user.elf"
+	$(Q) cp -a nuttx_user.elf $(TOPDIR)$(DELIM)nuttx_user.elf
+ifeq ($(CONFIG_INTELHEX_BINARY),y)
+	@echo "CP: nuttx_user.hex"
+	$(Q) $(OBJCOPY) $(OBJCOPYARGS) -O ihex nuttx_user.elf $(USER_HEXFILE)
+endif
+ifeq ($(CONFIG_MOTOROLA_SREC),y)
+	@echo "CP: nuttx_user.srec"
+	$(Q) $(OBJCOPY) $(OBJCOPYARGS) -O srec nuttx_user.elf $(USER_SRECFILE)
+endif
+ifeq ($(CONFIG_RAW_BINARY),y)
+	@echo "CP: nuttx_user.bin"
+	$(Q) $(OBJCOPY) $(OBJCOPYARGS) -O binary nuttx_user.elf $(USER_BINFILE)
+endif
+
+$(TOPDIR)$(DELIM)User.map: nuttx_user.elf
+	@echo "MK: User.map"
+	$(Q) $(NM) nuttx_user.elf >$(TOPDIR)$(DELIM)User.map
+	$(Q) $(CROSSDEV)size nuttx_user.elf
+
+.depend:
+
+depend: .depend
+
+clean:
+	$(call DELFILE, nuttx_user.elf)
+	$(call DELFILE, "$(TOPDIR)$(DELIM)nuttx_user.*")
+	$(call DELFILE, "$(TOPDIR)$(DELIM)User.map")
+	$(call CLEAN)
+
+distclean: clean
diff --git a/nuttx/configs/px4fmu-v2/kernel/up_userspace.c b/nuttx/configs/px4fmu-v2/kernel/up_userspace.c
new file mode 100644
index 000000000..47d3d8327
--- /dev/null
+++ b/nuttx/configs/px4fmu-v2/kernel/up_userspace.c
@@ -0,0 +1,143 @@
+/****************************************************************************
+ * configs/stm32f4discovery/kernel/up_userspace.c
+ *
+ *   Copyright (C) 2013 Gregory Nutt. All rights reserved.
+ *   Author: Gregory Nutt <gnutt@nuttx.org>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name NuttX nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ****************************************************************************/
+
+/****************************************************************************
+ * Included Files
+ ****************************************************************************/
+
+#include <nuttx/config.h>
+
+#include <stdlib.h>
+
+#include <nuttx/arch.h>
+#include <nuttx/mm/mm.h>
+#include <nuttx/wqueue.h>
+#include <nuttx/userspace.h>
+
+#if defined(CONFIG_BUILD_PROTECTED) && !defined(__KERNEL__)
+
+/****************************************************************************
+ * Pre-processor Definitions
+ ****************************************************************************/
+/* Configuration ************************************************************/
+
+#ifndef CONFIG_NUTTX_USERSPACE
+#  error "CONFIG_NUTTX_USERSPACE not defined"
+#endif
+
+#if CONFIG_NUTTX_USERSPACE != 0x08020000
+#  error "CONFIG_NUTTX_USERSPACE must be 0x08020000 to match memory.ld"
+#endif
+
+/****************************************************************************
+ * Public Data
+ ****************************************************************************/
+
+/* These 'addresses' of these values are setup by the linker script.  They are
+ * not actual uint32_t storage locations! They are only used meaningfully in the
+ * following way:
+ *
+ *  - The linker script defines, for example, the symbol_sdata.
+ *  - The declaration extern uint32_t _sdata; makes C happy.  C will believe
+ *    that the value _sdata is the address of a uint32_t variable _data (it is
+ *    not!).
+ *  - We can recoved the linker value then by simply taking the address of
+ *    of _data.  like:  uint32_t *pdata = &_sdata;
+ */
+
+extern uint32_t _stext;           /* Start of .text */
+extern uint32_t _etext;           /* End_1 of .text + .rodata */
+extern const uint32_t _eronly;    /* End+1 of read only section (.text + .rodata) */
+extern uint32_t _sdata;           /* Start of .data */
+extern uint32_t _edata;           /* End+1 of .data */
+extern uint32_t _sbss;            /* Start of .bss */
+extern uint32_t _ebss;            /* End+1 of .bss */
+
+/* This is the user space entry point */
+
+int CONFIG_USER_ENTRYPOINT(int argc, char *argv[]);
+
+const struct userspace_s userspace __attribute__ ((section (".userspace"))) =
+{
+  /* General memory map */
+
+  .us_entrypoint    = (main_t)CONFIG_USER_ENTRYPOINT,
+  .us_textstart     = (uintptr_t)&_stext,
+  .us_textend       = (uintptr_t)&_etext,
+  .us_datasource    = (uintptr_t)&_eronly,
+  .us_datastart     = (uintptr_t)&_sdata,
+  .us_dataend       = (uintptr_t)&_edata,
+  .us_bssstart      = (uintptr_t)&_sbss,
+  .us_bssend        = (uintptr_t)&_ebss,
+
+  /* Task/thread startup routines */
+
+  .task_startup     = task_startup,
+#ifndef CONFIG_DISABLE_PTHREAD
+  .pthread_startup  = pthread_startup,
+#endif
+
+  /* Signal handler trampoline */
+
+#ifndef CONFIG_DISABLE_SIGNALS
+  .signal_handler   = up_signal_handler,
+#endif
+
+  /* Memory manager entry points (declared in include/nuttx/mm/mm.h) */
+
+  .mm_initialize    = umm_initialize,
+  .mm_addregion     = umm_addregion,
+  .mm_trysemaphore  = umm_trysemaphore,
+  .mm_givesemaphore = umm_givesemaphore,
+
+  /* Memory manager entry points (declared in include/stdlib.h) */
+
+  .mm_malloc        = malloc,
+  .mm_realloc       = realloc,
+  .mm_zalloc        = zalloc,
+  .mm_free          = free,
+
+  /* User-space work queue support (declared in include/nuttx/wqueue.h) */
+
+#ifdef CONFIG_LIB_USRWORK
+  .work_usrstart    = work_usrstart,
+#endif
+};
+
+/****************************************************************************
+ * Public Functions
+ ****************************************************************************/
+
+#endif /* CONFIG_BUILD_PROTECTED && !__KERNEL__ */
diff --git a/nuttx/configs/px4fmu-v2/kostest/Make.defs b/nuttx/configs/px4fmu-v2/kostest/Make.defs
new file mode 100644
index 000000000..3810f0857
--- /dev/null
+++ b/nuttx/configs/px4fmu-v2/kostest/Make.defs
@@ -0,0 +1,123 @@
+############################################################################
+# configs/stm32f4discovery/kostest/Make.defs
+#
+#   Copyright (C) 2011-2012 Gregory Nutt. All rights reserved.
+#   Author: Gregory Nutt <gnutt@nuttx.org>
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions
+# are met:
+#
+# 1. Redistributions of source code must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+# 2. Redistributions in binary form must reproduce the above copyright
+#    notice, this list of conditions and the following disclaimer in
+#    the documentation and/or other materials provided with the
+#    distribution.
+# 3. Neither the name NuttX nor the names of its contributors may be
+#    used to endorse or promote products derived from this software
+#    without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+#
+############################################################################
+
+include ${TOPDIR}/.config
+include ${TOPDIR}/tools/Config.mk
+include ${TOPDIR}$(DELIM)arch$(DELIM)arm$(DELIM)src$(DELIM)armv7-m$(DELIM)Toolchain.defs
+
+ifeq ($(WINTOOL),y)
+  # Windows-native toolchains
+  ARCHINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)$(DELIM)include}"
+  ARCHXXINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)$(DELIM)include}" -isystem "${shell cygpath -w $(TOPDIR)$(DELIM)include$(DELIM)cxx}"
+  ARCHSCRIPT = -T "${shell cygpath -w $(TOPDIR)$(DELIM)configs$(DELIM)$(CONFIG_ARCH_BOARD)$(DELIM)scripts$(DELIM)memory.ld}"
+  ARCHSCRIPT += -T "${shell cygpath -w $(TOPDIR)$(DELIM)configs$(DELIM)$(CONFIG_ARCH_BOARD)$(DELIM)scripts$(DELIM)kernel-space.ld}"
+else
+  # Linux/Cygwin-native toolchain
+  ARCHINCLUDES = -I. -isystem $(TOPDIR)$(DELIM)include
+  ARCHXXINCLUDES = -I. -isystem $(TOPDIR)$(DELIM)include -isystem $(TOPDIR)$(DELIM)include$(DELIM)cxx
+  ARCHSCRIPT = -T$(TOPDIR)$(DELIM)configs$(DELIM)$(CONFIG_ARCH_BOARD)$(DELIM)scripts$(DELIM)memory.ld
+  ARCHSCRIPT += -T$(TOPDIR)$(DELIM)configs$(DELIM)$(CONFIG_ARCH_BOARD)$(DELIM)scripts$(DELIM)kernel-space.ld
+endif
+
+CC = $(CROSSDEV)gcc
+CXX = $(CROSSDEV)g++
+CPP = $(CROSSDEV)gcc -E
+LD = $(CROSSDEV)ld
+AR = $(ARCROSSDEV)ar rcs
+NM = $(ARCROSSDEV)nm
+OBJCOPY = $(CROSSDEV)objcopy
+OBJDUMP = $(CROSSDEV)objdump
+
+ARCHCCVERSION = ${shell $(CC) -v 2>&1 | sed -n '/^gcc version/p' | sed -e 's/^gcc version \([0-9\.]\)/\1/g' -e 's/[-\ ].*//g' -e '1q'}
+ARCHCCMAJOR = ${shell echo $(ARCHCCVERSION) | cut -d'.' -f1}
+
+ifeq ($(CONFIG_DEBUG_SYMBOLS),y)
+  ARCHOPTIMIZATION = -g
+endif
+
+ifneq ($(CONFIG_DEBUG_NOOPT),y)
+  ARCHOPTIMIZATION += $(MAXOPTIMIZATION) -fno-strict-aliasing -fno-strength-reduce -fomit-frame-pointer
+endif
+
+ARCHCFLAGS = -fno-builtin
+ARCHCXXFLAGS = -fno-builtin -fno-exceptions -fno-rtti
+ARCHWARNINGS = -Wall -Wstrict-prototypes -Wshadow
+ARCHWARNINGSXX = -Wall -Wshadow
+ARCHDEFINES =
+ARCHPICFLAGS = -fpic -msingle-pic-base -mpic-register=r10
+
+CFLAGS = $(ARCHCFLAGS) $(ARCHWARNINGS) $(ARCHOPTIMIZATION) $(ARCHCPUFLAGS) $(ARCHINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES) -pipe
+CPICFLAGS = $(ARCHPICFLAGS) $(CFLAGS)
+CXXFLAGS = $(ARCHCXXFLAGS) $(ARCHWARNINGSXX) $(ARCHOPTIMIZATION) $(ARCHCPUFLAGS) $(ARCHXXINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES) -pipe
+CXXPICFLAGS = $(ARCHPICFLAGS) $(CXXFLAGS)
+CPPFLAGS = $(ARCHINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES)
+AFLAGS = $(CFLAGS) -D__ASSEMBLY__
+
+NXFLATLDFLAGS1 = -r -d -warn-common
+NXFLATLDFLAGS2 = $(NXFLATLDFLAGS1) -T$(TOPDIR)$(DELIM)binfmt$(DELIM)libnxflat$(DELIM)gnu-nxflat-pcrel.ld -no-check-sections
+LDNXFLATFLAGS = -e main -s 2048
+
+OBJEXT = .o
+LIBEXT = .a
+EXEEXT =
+
+ifneq ($(CROSSDEV),arm-nuttx-elf-)
+  LDFLAGS += -nostartfiles -nodefaultlibs
+endif
+ifeq ($(CONFIG_DEBUG_SYMBOLS),y)
+  LDFLAGS += -g
+endif
+
+
+HOSTCC = gcc
+HOSTINCLUDES = -I.
+HOSTCFLAGS = -Wall -Wstrict-prototypes -Wshadow -g -pipe
+HOSTLDFLAGS =
+ifeq ($(CONFIG_HOST_WINDOWS),y)
+  HOSTEXEEXT = .exe
+else
+  HOSTEXEEXT =
+endif
+
+ifeq ($(WINTOOL),y)
+  # Windows-native host tools
+  DIRLINK = $(TOPDIR)$(DELIM)tools$(DELIM)copydir.sh
+  DIRUNLINK = $(TOPDIR)$(DELIM)tools$(DELIM)unlink.sh
+  MKDEP = $(TOPDIR)$(DELIM)tools$(DELIM)mknulldeps.sh
+else
+  # Linux/Cygwin-native host tools
+  MKDEP = $(TOPDIR)$(DELIM)tools$(DELIM)mkdeps$(HOSTEXEEXT)
+endif
+
diff --git a/nuttx/configs/px4fmu-v2/kostest/defconfig b/nuttx/configs/px4fmu-v2/kostest/defconfig
new file mode 100644
index 000000000..08774d3b2
--- /dev/null
+++ b/nuttx/configs/px4fmu-v2/kostest/defconfig
@@ -0,0 +1,951 @@
+#
+# Automatically generated file; DO NOT EDIT.
+# Nuttx/ Configuration
+#
+
+#
+# Build Setup
+#
+# CONFIG_EXPERIMENTAL is not set
+# CONFIG_DEFAULT_SMALL is not set
+# CONFIG_HOST_LINUX is not set
+# CONFIG_HOST_OSX is not set
+CONFIG_HOST_WINDOWS=y
+# CONFIG_HOST_OTHER is not set
+# CONFIG_WINDOWS_NATIVE is not set
+CONFIG_WINDOWS_CYGWIN=y
+# CONFIG_WINDOWS_MSYS is not set
+# CONFIG_WINDOWS_OTHER is not set
+
+#
+# Build Configuration
+#
+# CONFIG_APPS_DIR="../apps"
+# CONFIG_BUILD_FLAT is not set
+CONFIG_BUILD_PROTECTED=y
+CONFIG_BUILD_2PASS=y
+CONFIG_PASS1_TARGET="all"
+CONFIG_PASS1_BUILDIR="configs/stm32f4discovery/kernel"
+CONFIG_PASS1_OBJECT=""
+CONFIG_NUTTX_USERSPACE=0x08020000
+
+#
+# Binary Output Formats
+#
+# CONFIG_RRLOAD_BINARY is not set
+CONFIG_INTELHEX_BINARY=y
+# CONFIG_MOTOROLA_SREC is not set
+CONFIG_RAW_BINARY=y
+# CONFIG_UBOOT_UIMAGE is not set
+
+#
+# Customize Header Files
+#
+# CONFIG_ARCH_STDINT_H is not set
+# CONFIG_ARCH_STDBOOL_H is not set
+# CONFIG_ARCH_MATH_H is not set
+# CONFIG_ARCH_FLOAT_H is not set
+# CONFIG_ARCH_STDARG_H is not set
+
+#
+# Debug Options
+#
+# CONFIG_DEBUG is not set
+CONFIG_ARCH_HAVE_STACKCHECK=y
+CONFIG_ARCH_HAVE_HEAPCHECK=y
+# CONFIG_DEBUG_SYMBOLS is not set
+CONFIG_ARCH_HAVE_CUSTOMOPT=y
+# CONFIG_DEBUG_NOOPT is not set
+# CONFIG_DEBUG_CUSTOMOPT is not set
+CONFIG_DEBUG_FULLOPT=y
+
+#
+# System Type
+#
+CONFIG_ARCH_ARM=y
+# CONFIG_ARCH_AVR is not set
+# CONFIG_ARCH_HC is not set
+# CONFIG_ARCH_MIPS is not set
+# CONFIG_ARCH_RGMP is not set
+# CONFIG_ARCH_SH is not set
+# CONFIG_ARCH_SIM is not set
+# CONFIG_ARCH_X86 is not set
+# CONFIG_ARCH_Z16 is not set
+# CONFIG_ARCH_Z80 is not set
+CONFIG_ARCH="arm"
+
+#
+# ARM Options
+#
+# CONFIG_ARCH_CHIP_A1X is not set
+# CONFIG_ARCH_CHIP_C5471 is not set
+# CONFIG_ARCH_CHIP_CALYPSO is not set
+# CONFIG_ARCH_CHIP_DM320 is not set
+# CONFIG_ARCH_CHIP_IMX is not set
+# CONFIG_ARCH_CHIP_KINETIS is not set
+# CONFIG_ARCH_CHIP_KL is not set
+# CONFIG_ARCH_CHIP_LM is not set
+# CONFIG_ARCH_CHIP_TIVA is not set
+# CONFIG_ARCH_CHIP_LPC17XX is not set
+# CONFIG_ARCH_CHIP_LPC214X is not set
+# CONFIG_ARCH_CHIP_LPC2378 is not set
+# CONFIG_ARCH_CHIP_LPC31XX is not set
+# CONFIG_ARCH_CHIP_LPC43XX is not set
+# CONFIG_ARCH_CHIP_NUC1XX is not set
+# CONFIG_ARCH_CHIP_SAMA5 is not set
+# CONFIG_ARCH_CHIP_SAMD is not set
+# CONFIG_ARCH_CHIP_SAM34 is not set
+CONFIG_ARCH_CHIP_STM32=y
+# CONFIG_ARCH_CHIP_STR71X is not set
+# CONFIG_ARCH_ARM7TDMI is not set
+# CONFIG_ARCH_ARM926EJS is not set
+# CONFIG_ARCH_ARM920T is not set
+# CONFIG_ARCH_CORTEXM0 is not set
+# CONFIG_ARCH_CORTEXM3 is not set
+CONFIG_ARCH_CORTEXM4=y
+# CONFIG_ARCH_CORTEXA5 is not set
+# CONFIG_ARCH_CORTEXA8 is not set
+CONFIG_ARCH_FAMILY="armv7-m"
+CONFIG_ARCH_CHIP="stm32"
+# CONFIG_ARMV7M_USEBASEPRI is not set
+CONFIG_ARCH_HAVE_CMNVECTOR=y
+# CONFIG_ARMV7M_CMNVECTOR is not set
+CONFIG_ARCH_HAVE_FPU=y
+# CONFIG_ARCH_FPU is not set
+CONFIG_ARMV7M_MPU=y
+CONFIG_ARMV7M_MPU_NREGIONS=8
+
+#
+# ARMV7M Configuration Options
+#
+# CONFIG_ARMV7M_TOOLCHAIN_ATOLLIC is not set
+# CONFIG_ARMV7M_TOOLCHAIN_BUILDROOT is not set
+# CONFIG_ARMV7M_TOOLCHAIN_CODEREDW is not set
+CONFIG_ARMV7M_TOOLCHAIN_CODESOURCERYW=y
+# CONFIG_ARMV7M_TOOLCHAIN_DEVKITARM is not set
+# CONFIG_ARMV7M_TOOLCHAIN_GNU_EABIL is not set
+# CONFIG_ARMV7M_TOOLCHAIN_GNU_EABIW is not set
+# CONFIG_ARMV7M_TOOLCHAIN_RAISONANCE is not set
+# CONFIG_SERIAL_TERMIOS is not set
+
+#
+# STM32 Configuration Options
+#
+# CONFIG_ARCH_CHIP_STM32L151C6 is not set
+# CONFIG_ARCH_CHIP_STM32L151C8 is not set
+# CONFIG_ARCH_CHIP_STM32L151CB is not set
+# CONFIG_ARCH_CHIP_STM32L151R6 is not set
+# CONFIG_ARCH_CHIP_STM32L151R8 is not set
+# CONFIG_ARCH_CHIP_STM32L151RB is not set
+# CONFIG_ARCH_CHIP_STM32L151V6 is not set
+# CONFIG_ARCH_CHIP_STM32L151V8 is not set
+# CONFIG_ARCH_CHIP_STM32L151VB is not set
+# CONFIG_ARCH_CHIP_STM32L152C6 is not set
+# CONFIG_ARCH_CHIP_STM32L152C8 is not set
+# CONFIG_ARCH_CHIP_STM32L152CB is not set
+# CONFIG_ARCH_CHIP_STM32L152R6 is not set
+# CONFIG_ARCH_CHIP_STM32L152R8 is not set
+# CONFIG_ARCH_CHIP_STM32L152RB is not set
+# CONFIG_ARCH_CHIP_STM32L152V6 is not set
+# CONFIG_ARCH_CHIP_STM32L152V8 is not set
+# CONFIG_ARCH_CHIP_STM32L152VB is not set
+# CONFIG_ARCH_CHIP_STM32L162ZD is not set
+# CONFIG_ARCH_CHIP_STM32F100C8 is not set
+# CONFIG_ARCH_CHIP_STM32F100CB is not set
+# CONFIG_ARCH_CHIP_STM32F100R8 is not set
+# CONFIG_ARCH_CHIP_STM32F100RB is not set
+# CONFIG_ARCH_CHIP_STM32F100RC is not set
+# CONFIG_ARCH_CHIP_STM32F100RD is not set
+# CONFIG_ARCH_CHIP_STM32F100RE is not set
+# CONFIG_ARCH_CHIP_STM32F100V8 is not set
+# CONFIG_ARCH_CHIP_STM32F100VB is not set
+# CONFIG_ARCH_CHIP_STM32F100VC is not set
+# CONFIG_ARCH_CHIP_STM32F100VD is not set
+# CONFIG_ARCH_CHIP_STM32F100VE is not set
+# CONFIG_ARCH_CHIP_STM32F103T8 is not set
+# CONFIG_ARCH_CHIP_STM32F103TB is not set
+# CONFIG_ARCH_CHIP_STM32F103C4 is not set
+# CONFIG_ARCH_CHIP_STM32F103C8 is not set
+# CONFIG_ARCH_CHIP_STM32F103CB is not set
+# CONFIG_ARCH_CHIP_STM32F103R8 is not set
+# CONFIG_ARCH_CHIP_STM32F103RB is not set
+# CONFIG_ARCH_CHIP_STM32F103RC is not set
+# CONFIG_ARCH_CHIP_STM32F103RD is not set
+# CONFIG_ARCH_CHIP_STM32F103RE is not set
+# CONFIG_ARCH_CHIP_STM32F103V8 is not set
+# CONFIG_ARCH_CHIP_STM32F103VB is not set
+# CONFIG_ARCH_CHIP_STM32F103VC is not set
+# CONFIG_ARCH_CHIP_STM32F103VE is not set
+# CONFIG_ARCH_CHIP_STM32F103ZE is not set
+# CONFIG_ARCH_CHIP_STM32F105VB is not set
+# CONFIG_ARCH_CHIP_STM32F107VC is not set
+# CONFIG_ARCH_CHIP_STM32F207IG is not set
+# CONFIG_ARCH_CHIP_STM32F207ZE is not set
+# CONFIG_ARCH_CHIP_STM32F302CB is not set
+# CONFIG_ARCH_CHIP_STM32F302CC is not set
+# CONFIG_ARCH_CHIP_STM32F302RB is not set
+# CONFIG_ARCH_CHIP_STM32F302RC is not set
+# CONFIG_ARCH_CHIP_STM32F302VB is not set
+# CONFIG_ARCH_CHIP_STM32F302VC is not set
+# CONFIG_ARCH_CHIP_STM32F303CB is not set
+# CONFIG_ARCH_CHIP_STM32F303CC is not set
+# CONFIG_ARCH_CHIP_STM32F303RB is not set
+# CONFIG_ARCH_CHIP_STM32F303RC is not set
+# CONFIG_ARCH_CHIP_STM32F303VB is not set
+# CONFIG_ARCH_CHIP_STM32F303VC is not set
+# CONFIG_ARCH_CHIP_STM32F401RE is not set
+# CONFIG_ARCH_CHIP_STM32F405RG is not set
+# CONFIG_ARCH_CHIP_STM32F405VG is not set
+# CONFIG_ARCH_CHIP_STM32F405ZG is not set
+# CONFIG_ARCH_CHIP_STM32F407VE is not set
+CONFIG_ARCH_CHIP_STM32F407VG=y
+# CONFIG_ARCH_CHIP_STM32F407ZE is not set
+# CONFIG_ARCH_CHIP_STM32F407ZG is not set
+# CONFIG_ARCH_CHIP_STM32F407IE is not set
+# CONFIG_ARCH_CHIP_STM32F407IG is not set
+# CONFIG_ARCH_CHIP_STM32F427V is not set
+# CONFIG_ARCH_CHIP_STM32F427Z is not set
+# CONFIG_ARCH_CHIP_STM32F427I is not set
+# CONFIG_ARCH_CHIP_STM32F429V is not set
+# CONFIG_ARCH_CHIP_STM32F429Z is not set
+# CONFIG_ARCH_CHIP_STM32F429I is not set
+# CONFIG_ARCH_CHIP_STM32F429B is not set
+# CONFIG_ARCH_CHIP_STM32F429N is not set
+# CONFIG_STM32_STM32L15XX is not set
+# CONFIG_STM32_ENERGYLITE is not set
+# CONFIG_STM32_STM32F10XX is not set
+# CONFIG_STM32_VALUELINE is not set
+# CONFIG_STM32_CONNECTIVITYLINE is not set
+# CONFIG_STM32_PERFORMANCELINE is not set
+# CONFIG_STM32_HIGHDENSITY is not set
+# CONFIG_STM32_MEDIUMDENSITY is not set
+# CONFIG_STM32_LOWDENSITY is not set
+# CONFIG_STM32_STM32F20XX is not set
+# CONFIG_STM32_STM32F207 is not set
+# CONFIG_STM32_STM32F30XX is not set
+CONFIG_STM32_STM32F40XX=y
+# CONFIG_STM32_STM32F401 is not set
+# CONFIG_STM32_STM32F405 is not set
+CONFIG_STM32_STM32F407=y
+# CONFIG_STM32_STM32F427 is not set
+# CONFIG_STM32_STM32F429 is not set
+# CONFIG_STM32_DFU is not set
+
+#
+# STM32 Peripheral Support
+#
+CONFIG_STM32_HAVE_CCM=y
+# CONFIG_STM32_HAVE_USBDEV is not set
+CONFIG_STM32_HAVE_OTGFS=y
+CONFIG_STM32_HAVE_FSMC=y
+CONFIG_STM32_HAVE_USART3=y
+CONFIG_STM32_HAVE_UART4=y
+CONFIG_STM32_HAVE_UART5=y
+CONFIG_STM32_HAVE_USART6=y
+# CONFIG_STM32_HAVE_UART7 is not set
+# CONFIG_STM32_HAVE_UART8 is not set
+CONFIG_STM32_HAVE_TIM1=y
+CONFIG_STM32_HAVE_TIM5=y
+CONFIG_STM32_HAVE_TIM6=y
+CONFIG_STM32_HAVE_TIM7=y
+CONFIG_STM32_HAVE_TIM8=y
+CONFIG_STM32_HAVE_TIM9=y
+CONFIG_STM32_HAVE_TIM10=y
+CONFIG_STM32_HAVE_TIM11=y
+CONFIG_STM32_HAVE_TIM12=y
+CONFIG_STM32_HAVE_TIM13=y
+CONFIG_STM32_HAVE_TIM14=y
+# CONFIG_STM32_HAVE_TIM15 is not set
+# CONFIG_STM32_HAVE_TIM16 is not set
+# CONFIG_STM32_HAVE_TIM17 is not set
+CONFIG_STM32_HAVE_ADC2=y
+CONFIG_STM32_HAVE_ADC3=y
+# CONFIG_STM32_HAVE_ADC4 is not set
+CONFIG_STM32_HAVE_CAN1=y
+CONFIG_STM32_HAVE_CAN2=y
+CONFIG_STM32_HAVE_RNG=y
+CONFIG_STM32_HAVE_ETHMAC=y
+# CONFIG_STM32_ADC1 is not set
+# CONFIG_STM32_ADC2 is not set
+# CONFIG_STM32_ADC3 is not set
+# CONFIG_STM32_BKPSRAM is not set
+# CONFIG_STM32_CAN1 is not set
+# CONFIG_STM32_CAN2 is not set
+# CONFIG_STM32_CCMDATARAM is not set
+# CONFIG_STM32_CRC is not set
+# CONFIG_STM32_CRYP is not set
+# CONFIG_STM32_DMA1 is not set
+# CONFIG_STM32_DMA2 is not set
+# CONFIG_STM32_DAC1 is not set
+# CONFIG_STM32_DAC2 is not set
+# CONFIG_STM32_DCMI is not set
+# CONFIG_STM32_ETHMAC is not set
+# CONFIG_STM32_FSMC is not set
+# CONFIG_STM32_HASH is not set
+# CONFIG_STM32_I2C1 is not set
+# CONFIG_STM32_I2C2 is not set
+# CONFIG_STM32_I2C3 is not set
+# CONFIG_STM32_OTGFS is not set
+# CONFIG_STM32_OTGHS is not set
+# CONFIG_STM32_PWR is not set
+# CONFIG_STM32_RNG is not set
+# CONFIG_STM32_SDIO is not set
+# CONFIG_STM32_SPI1 is not set
+# CONFIG_STM32_SPI2 is not set
+# CONFIG_STM32_SPI3 is not set
+CONFIG_STM32_SYSCFG=y
+# CONFIG_STM32_TIM1 is not set
+# CONFIG_STM32_TIM2 is not set
+# CONFIG_STM32_TIM3 is not set
+# CONFIG_STM32_TIM4 is not set
+# CONFIG_STM32_TIM5 is not set
+# CONFIG_STM32_TIM6 is not set
+# CONFIG_STM32_TIM7 is not set
+# CONFIG_STM32_TIM8 is not set
+# CONFIG_STM32_TIM9 is not set
+# CONFIG_STM32_TIM10 is not set
+# CONFIG_STM32_TIM11 is not set
+# CONFIG_STM32_TIM12 is not set
+# CONFIG_STM32_TIM13 is not set
+# CONFIG_STM32_TIM14 is not set
+# CONFIG_STM32_USART1 is not set
+CONFIG_STM32_USART2=y
+# CONFIG_STM32_USART3 is not set
+# CONFIG_STM32_UART4 is not set
+# CONFIG_STM32_UART5 is not set
+# CONFIG_STM32_USART6 is not set
+# CONFIG_STM32_IWDG is not set
+# CONFIG_STM32_WWDG is not set
+
+#
+# Alternate Pin Mapping
+#
+# CONFIG_STM32_FLASH_PREFETCH is not set
+# CONFIG_STM32_JTAG_DISABLE is not set
+# CONFIG_STM32_JTAG_FULL_ENABLE is not set
+# CONFIG_STM32_JTAG_NOJNTRST_ENABLE is not set
+CONFIG_STM32_JTAG_SW_ENABLE=y
+# CONFIG_STM32_DISABLE_IDLE_SLEEP_DURING_DEBUG is not set
+# CONFIG_STM32_FORCEPOWER is not set
+# CONFIG_ARCH_BOARD_STM32_CUSTOM_CLOCKCONFIG is not set
+# CONFIG_STM32_CCMEXCLUDE is not set
+CONFIG_STM32_USART=y
+
+#
+# U[S]ART Configuration
+#
+# CONFIG_USART2_RS485 is not set
+# CONFIG_SERIAL_DISABLE_REORDERING is not set
+# CONFIG_STM32_USART_SINGLEWIRE is not set
+
+#
+# USB Host Configuration
+#
+
+#
+# USB Device Configuration
+#
+
+#
+# Architecture Options
+#
+# CONFIG_ARCH_NOINTC is not set
+# CONFIG_ARCH_VECNOTIRQ is not set
+# CONFIG_ARCH_DMA is not set
+CONFIG_ARCH_HAVE_IRQPRIO=y
+# CONFIG_ARCH_L2CACHE is not set
+# CONFIG_ARCH_HAVE_COHERENT_DCACHE is not set
+# CONFIG_ARCH_HAVE_ADDRENV is not set
+# CONFIG_ARCH_NEED_ADDRENV_MAPPING is not set
+CONFIG_ARCH_HAVE_VFORK=y
+# CONFIG_ARCH_HAVE_MMU is not set
+CONFIG_ARCH_HAVE_MPU=y
+# CONFIG_ARCH_NAND_HWECC is not set
+# CONFIG_ARCH_HAVE_EXTCLK is not set
+CONFIG_ARCH_USE_MPU=y
+# CONFIG_ARCH_IRQPRIO is not set
+CONFIG_ARCH_STACKDUMP=y
+# CONFIG_ENDIAN_BIG is not set
+# CONFIG_ARCH_IDLE_CUSTOM is not set
+# CONFIG_ARCH_HAVE_RAMFUNCS is not set
+CONFIG_ARCH_HAVE_RAMVECTORS=y
+# CONFIG_ARCH_RAMVECTORS is not set
+
+#
+# Board Settings
+#
+CONFIG_BOARD_LOOPSPERMSEC=16717
+# CONFIG_ARCH_CALIBRATION is not set
+
+#
+# Interrupt options
+#
+CONFIG_ARCH_HAVE_INTERRUPTSTACK=y
+CONFIG_ARCH_INTERRUPTSTACK=0
+CONFIG_ARCH_HAVE_HIPRI_INTERRUPT=y
+# CONFIG_ARCH_HIPRI_INTERRUPT is not set
+
+#
+# Boot options
+#
+# CONFIG_BOOT_RUNFROMEXTSRAM is not set
+CONFIG_BOOT_RUNFROMFLASH=y
+# CONFIG_BOOT_RUNFROMISRAM is not set
+# CONFIG_BOOT_RUNFROMSDRAM is not set
+# CONFIG_BOOT_COPYTORAM is not set
+
+#
+# Boot Memory Configuration
+#
+CONFIG_RAM_START=0x20000000
+CONFIG_RAM_SIZE=114688
+# CONFIG_ARCH_HAVE_SDRAM is not set
+
+#
+# Board Selection
+#
+CONFIG_ARCH_BOARD_STM32F4_DISCOVERY=y
+# CONFIG_ARCH_BOARD_MIKROE_STM32F4 is not set
+# CONFIG_ARCH_BOARD_CUSTOM is not set
+CONFIG_ARCH_BOARD="stm32f4discovery"
+
+#
+# Common Board Options
+#
+CONFIG_ARCH_HAVE_LEDS=y
+CONFIG_ARCH_LEDS=y
+CONFIG_ARCH_HAVE_BUTTONS=y
+# CONFIG_ARCH_BUTTONS is not set
+CONFIG_ARCH_HAVE_IRQBUTTONS=y
+
+#
+# Board-Specific Options
+#
+# CONFIG_STM32F4DISBB is not set
+
+#
+# RTOS Features
+#
+CONFIG_DISABLE_OS_API=y
+# CONFIG_DISABLE_POSIX_TIMERS is not set
+# CONFIG_DISABLE_PTHREAD is not set
+# CONFIG_DISABLE_SIGNALS is not set
+# CONFIG_DISABLE_MQUEUE is not set
+CONFIG_DISABLE_ENVIRON=y
+
+#
+# Clocks and Timers
+#
+CONFIG_USEC_PER_TICK=10000
+# CONFIG_SYSTEM_TIME64 is not set
+# CONFIG_CLOCK_MONOTONIC is not set
+# CONFIG_JULIAN_TIME is not set
+CONFIG_START_YEAR=2013
+CONFIG_START_MONTH=3
+CONFIG_START_DAY=22
+CONFIG_MAX_WDOGPARMS=2
+CONFIG_PREALLOC_WDOGS=8
+CONFIG_WDOG_INTRESERVE=2
+CONFIG_PREALLOC_TIMERS=4
+
+#
+# Tasks and Scheduling
+#
+# CONFIG_INIT_NONE is not set
+CONFIG_INIT_ENTRYPOINT=y
+# CONFIG_INIT_FILEPATH is not set
+CONFIG_USER_ENTRYPOINT="ostest_main"
+CONFIG_RR_INTERVAL=200
+CONFIG_TASK_NAME_SIZE=0
+CONFIG_MAX_TASK_ARGS=4
+CONFIG_MAX_TASKS=16
+# CONFIG_SCHED_HAVE_PARENT is not set
+CONFIG_SCHED_WAITPID=y
+
+#
+# Pthread Options
+#
+# CONFIG_MUTEX_TYPES is not set
+CONFIG_NPTHREAD_KEYS=4
+
+#
+# Performance Monitoring
+#
+# CONFIG_SCHED_CPULOAD is not set
+# CONFIG_SCHED_INSTRUMENTATION is not set
+
+#
+# Files and I/O
+#
+CONFIG_DEV_CONSOLE=y
+# CONFIG_FDCLONE_DISABLE is not set
+# CONFIG_FDCLONE_STDIO is not set
+CONFIG_SDCLONE_DISABLE=y
+CONFIG_NFILE_DESCRIPTORS=8
+CONFIG_NFILE_STREAMS=8
+CONFIG_NAME_MAX=32
+# CONFIG_PRIORITY_INHERITANCE is not set
+
+#
+# RTOS hooks
+#
+CONFIG_BOARD_INITIALIZE=y
+# CONFIG_BOARD_INITTHREAD is not set
+# CONFIG_SCHED_STARTHOOK is not set
+# CONFIG_SCHED_ATEXIT is not set
+# CONFIG_SCHED_ONEXIT is not set
+
+#
+# Signal Numbers
+#
+CONFIG_SIG_SIGUSR1=1
+CONFIG_SIG_SIGUSR2=2
+CONFIG_SIG_SIGALARM=3
+CONFIG_SIG_SIGCONDTIMEDOUT=16
+
+#
+# POSIX Message Queue Options
+#
+CONFIG_PREALLOC_MQ_MSGS=4
+CONFIG_MQ_MAXMSGSIZE=32
+
+#
+# Stack and heap information
+#
+CONFIG_IDLETHREAD_STACKSIZE=1024
+CONFIG_USERMAIN_STACKSIZE=2048
+CONFIG_PTHREAD_STACK_MIN=256
+CONFIG_PTHREAD_STACK_DEFAULT=2048
+CONFIG_LIB_SYSCALL=y
+CONFIG_SYS_RESERVED=8
+CONFIG_SYS_NNEST=2
+
+#
+# Device Drivers
+#
+CONFIG_DISABLE_POLL=y
+CONFIG_DEV_NULL=y
+# CONFIG_DEV_ZERO is not set
+# CONFIG_LOOP is not set
+
+#
+# Buffering
+#
+# CONFIG_DRVR_WRITEBUFFER is not set
+# CONFIG_DRVR_READAHEAD is not set
+# CONFIG_RAMDISK is not set
+# CONFIG_CAN is not set
+# CONFIG_ARCH_HAVE_PWM_PULSECOUNT is not set
+# CONFIG_PWM is not set
+CONFIG_ARCH_HAVE_I2CRESET=y
+# CONFIG_I2C is not set
+# CONFIG_SPI is not set
+# CONFIG_I2S is not set
+# CONFIG_RTC is not set
+# CONFIG_WATCHDOG is not set
+# CONFIG_TIMER is not set
+# CONFIG_ANALOG is not set
+# CONFIG_AUDIO_DEVICES is not set
+# CONFIG_VIDEO_DEVICES is not set
+# CONFIG_BCH is not set
+# CONFIG_INPUT is not set
+# CONFIG_LCD is not set
+# CONFIG_MMCSD is not set
+# CONFIG_MTD is not set
+# CONFIG_PIPES is not set
+# CONFIG_PM is not set
+# CONFIG_POWER is not set
+# CONFIG_SENSORS is not set
+# CONFIG_SERCOMM_CONSOLE is not set
+CONFIG_SERIAL=y
+CONFIG_DEV_LOWCONSOLE=y
+# CONFIG_16550_UART is not set
+# CONFIG_ARCH_HAVE_UART is not set
+# CONFIG_ARCH_HAVE_UART0 is not set
+# CONFIG_ARCH_HAVE_UART1 is not set
+# CONFIG_ARCH_HAVE_UART2 is not set
+# CONFIG_ARCH_HAVE_UART3 is not set
+# CONFIG_ARCH_HAVE_UART4 is not set
+# CONFIG_ARCH_HAVE_UART5 is not set
+# CONFIG_ARCH_HAVE_UART6 is not set
+# CONFIG_ARCH_HAVE_UART7 is not set
+# CONFIG_ARCH_HAVE_UART8 is not set
+# CONFIG_ARCH_HAVE_SCI0 is not set
+# CONFIG_ARCH_HAVE_SCI1 is not set
+# CONFIG_ARCH_HAVE_USART0 is not set
+# CONFIG_ARCH_HAVE_USART1 is not set
+CONFIG_ARCH_HAVE_USART2=y
+# CONFIG_ARCH_HAVE_USART3 is not set
+# CONFIG_ARCH_HAVE_USART4 is not set
+# CONFIG_ARCH_HAVE_USART5 is not set
+# CONFIG_ARCH_HAVE_USART6 is not set
+# CONFIG_ARCH_HAVE_USART7 is not set
+# CONFIG_ARCH_HAVE_USART8 is not set
+
+#
+# USART Configuration
+#
+CONFIG_USART2_ISUART=y
+CONFIG_MCU_SERIAL=y
+CONFIG_USART2_SERIAL_CONSOLE=y
+# CONFIG_NO_SERIAL_CONSOLE is not set
+
+#
+# USART2 Configuration
+#
+CONFIG_USART2_RXBUFSIZE=128
+CONFIG_USART2_TXBUFSIZE=128
+CONFIG_USART2_BAUD=115200
+CONFIG_USART2_BITS=8
+CONFIG_USART2_PARITY=0
+CONFIG_USART2_2STOP=0
+# CONFIG_USART2_IFLOWCONTROL is not set
+# CONFIG_USART2_OFLOWCONTROL is not set
+# CONFIG_SERIAL_IFLOWCONTROL is not set
+# CONFIG_SERIAL_OFLOWCONTROL is not set
+# CONFIG_USBDEV is not set
+# CONFIG_USBHOST is not set
+# CONFIG_WIRELESS is not set
+
+#
+# System Logging Device Options
+#
+
+#
+# System Logging
+#
+# CONFIG_RAMLOG is not set
+
+#
+# Networking Support
+#
+# CONFIG_ARCH_HAVE_NET is not set
+# CONFIG_ARCH_HAVE_PHY is not set
+# CONFIG_NET is not set
+
+#
+# Crypto API
+#
+# CONFIG_CRYPTO is not set
+
+#
+# File Systems
+#
+
+#
+# File system configuration
+#
+CONFIG_DISABLE_MOUNTPOINT=y
+# CONFIG_DISABLE_PSEUDOFS_OPERATIONS is not set
+# CONFIG_FS_READABLE is not set
+# CONFIG_FS_WRITABLE is not set
+# CONFIG_FS_NAMED_SEMAPHORES is not set
+# CONFIG_FS_RAMMAP is not set
+# CONFIG_FS_PROCFS is not set
+
+#
+# System Logging
+#
+
+# CONFIG_SYSLOG is not set
+
+#
+# Graphics Support
+#
+# CONFIG_NX is not set
+
+#
+# Memory Management
+#
+CONFIG_MM_KERNEL_HEAP=y
+CONFIG_MM_KERNEL_HEAPSIZE=8192
+# CONFIG_MM_SMALL is not set
+CONFIG_MM_REGIONS=2
+# CONFIG_ARCH_HAVE_HEAP2 is not set
+# CONFIG_GRAN is not set
+
+#
+# Audio Support
+#
+# CONFIG_AUDIO is not set
+
+#
+# Binary Formats
+#
+# CONFIG_BINFMT_DISABLE is not set
+# CONFIG_NXFLAT is not set
+# CONFIG_ELF is not set
+# CONFIG_PIC is not set
+CONFIG_SYMTAB_ORDEREDBYNAME=y
+
+#
+# Library Routines
+#
+
+#
+# Standard C Library Options
+#
+CONFIG_STDIO_BUFFER_SIZE=64
+CONFIG_STDIO_LINEBUFFER=y
+CONFIG_NUNGET_CHARS=2
+# CONFIG_LIBM is not set
+# CONFIG_NOPRINTF_FIELDWIDTH is not set
+# CONFIG_LIBC_FLOATINGPOINT is not set
+CONFIG_LIB_RAND_ORDER=1
+# CONFIG_EOL_IS_CR is not set
+# CONFIG_EOL_IS_LF is not set
+# CONFIG_EOL_IS_BOTH_CRLF is not set
+CONFIG_EOL_IS_EITHER_CRLF=y
+# CONFIG_LIBC_EXECFUNCS is not set
+CONFIG_POSIX_SPAWN_PROXY_STACKSIZE=1024
+CONFIG_TASK_SPAWN_DEFAULT_STACKSIZE=2048
+# CONFIG_LIBC_STRERROR is not set
+# CONFIG_LIBC_PERROR_STDOUT is not set
+CONFIG_ARCH_LOWPUTC=y
+CONFIG_LIB_SENDFILE_BUFSIZE=512
+# CONFIG_ARCH_ROMGETC is not set
+# CONFIG_ARCH_OPTIMIZED_FUNCTIONS is not set
+
+#
+# Non-standard Library Support
+#
+# CONFIG_SCHED_WORKQUEUE is not set
+# CONFIG_LIB_KBDCODEC is not set
+# CONFIG_LIB_SLCDCODEC is not set
+
+#
+# Basic CXX Support
+#
+# CONFIG_C99_BOOL8 is not set
+# CONFIG_HAVE_CXX is not set
+
+#
+# Application Configuration
+#
+
+#
+# Built-In Applications
+#
+
+#
+# Examples
+#
+# CONFIG_EXAMPLES_BUTTONS is not set
+# CONFIG_EXAMPLES_CAN is not set
+# CONFIG_EXAMPLES_CONFIGDATA is not set
+# CONFIG_EXAMPLES_CPUHOG is not set
+# CONFIG_EXAMPLES_DHCPD is not set
+# CONFIG_EXAMPLES_ELF is not set
+# CONFIG_EXAMPLES_FTPC is not set
+# CONFIG_EXAMPLES_FTPD is not set
+# CONFIG_EXAMPLES_HELLO is not set
+# CONFIG_EXAMPLES_HELLOXX is not set
+# CONFIG_EXAMPLES_JSON is not set
+# CONFIG_EXAMPLES_HIDKBD is not set
+# CONFIG_EXAMPLES_KEYPADTEST is not set
+# CONFIG_EXAMPLES_IGMP is not set
+# CONFIG_EXAMPLES_MM is not set
+# CONFIG_EXAMPLES_MODBUS is not set
+# CONFIG_EXAMPLES_MOUNT is not set
+# CONFIG_EXAMPLES_NRF24L01TERM is not set
+# CONFIG_EXAMPLES_NSH is not set
+# CONFIG_EXAMPLES_NULL is not set
+# CONFIG_EXAMPLES_NX is not set
+# CONFIG_EXAMPLES_NXTERM is not set
+# CONFIG_EXAMPLES_NXFFS is not set
+# CONFIG_EXAMPLES_NXFLAT is not set
+# CONFIG_EXAMPLES_NXHELLO is not set
+# CONFIG_EXAMPLES_NXIMAGE is not set
+# CONFIG_EXAMPLES_NXLINES is not set
+# CONFIG_EXAMPLES_NXTEXT is not set
+CONFIG_EXAMPLES_OSTEST=y
+CONFIG_EXAMPLES_OSTEST_LOOPS=1
+CONFIG_EXAMPLES_OSTEST_STACKSIZE=2048
+CONFIG_EXAMPLES_OSTEST_NBARRIER_THREADS=3
+CONFIG_EXAMPLES_OSTEST_RR_RANGE=10000
+CONFIG_EXAMPLES_OSTEST_RR_RUNS=10
+# CONFIG_EXAMPLES_PIPE is not set
+# CONFIG_EXAMPLES_POLL is not set
+# CONFIG_EXAMPLES_POSIXSPAWN is not set
+# CONFIG_EXAMPLES_QENCODER is not set
+# CONFIG_EXAMPLES_RGMP is not set
+# CONFIG_EXAMPLES_ROMFS is not set
+# CONFIG_EXAMPLES_SENDMAIL is not set
+# CONFIG_EXAMPLES_SERIALBLASTER is not set
+# CONFIG_EXAMPLES_SERIALRX is not set
+# CONFIG_EXAMPLES_SERLOOP is not set
+# CONFIG_EXAMPLES_SLCD is not set
+# CONFIG_EXAMPLES_SMART is not set
+# CONFIG_EXAMPLES_TCPECHO is not set
+# CONFIG_EXAMPLES_TELNETD is not set
+# CONFIG_EXAMPLES_THTTPD is not set
+# CONFIG_EXAMPLES_TIFF is not set
+# CONFIG_EXAMPLES_TOUCHSCREEN is not set
+# CONFIG_EXAMPLES_UDP is not set
+# CONFIG_EXAMPLES_WEBSERVER is not set
+# CONFIG_EXAMPLES_USBSERIAL is not set
+# CONFIG_EXAMPLES_USBTERM is not set
+# CONFIG_EXAMPLES_WATCHDOG is not set
+
+#
+# Graphics Support
+#
+# CONFIG_TIFF is not set
+
+#
+# Interpreters
+#
+# CONFIG_INTERPRETERS_FICL is not set
+# CONFIG_INTERPRETERS_PCODE is not set
+
+#
+# Network Utilities
+#
+
+#
+# Networking Utilities
+#
+# CONFIG_NETUTILS_CODECS is not set
+# CONFIG_NETUTILS_DHCPD is not set
+# CONFIG_NETUTILS_FTPC is not set
+# CONFIG_NETUTILS_FTPD is not set
+# CONFIG_NETUTILS_JSON is not set
+# CONFIG_NETUTILS_SMTP is not set
+# CONFIG_NETUTILS_TFTPC is not set
+# CONFIG_NETUTILS_THTTPD is not set
+# CONFIG_NETUTILS_NETLIB is not set
+# CONFIG_NETUTILS_WEBCLIENT is not set
+
+#
+# FreeModBus
+#
+# CONFIG_MODBUS is not set
+
+#
+# NSH Library
+#
+# CONFIG_NSH_LIBRARY is not set
+
+#
+# NxWidgets/NxWM
+#
+
+#
+# Platform-specific Support
+#
+# CONFIG_PLATFORM_CONFIGDATA is not set
+
+#
+# System Libraries and NSH Add-Ons
+#
+
+#
+# Custom Free Memory Command
+#
+# CONFIG_SYSTEM_FREE is not set
+
+#
+# EMACS-like Command Line Editor
+#
+# CONFIG_SYSTEM_CLE is not set
+
+#
+# FLASH Program Installation
+#
+# CONFIG_SYSTEM_INSTALL is not set
+
+#
+# FLASH Erase-all Command
+#
+
+#
+# Intel HEX to binary conversion
+#
+# CONFIG_SYSTEM_HEX2BIN is not set
+
+#
+# I2C tool
+#
+
+#
+# INI File Parser
+#
+# CONFIG_SYSTEM_INIFILE is not set
+
+#
+# NxPlayer media player library / command Line
+#
+# CONFIG_SYSTEM_NXPLAYER is not set
+
+#
+# RAM test
+#
+# CONFIG_SYSTEM_RAMTEST is not set
+
+#
+# readline()
+#
+# CONFIG_SYSTEM_READLINE is not set
+
+#
+# P-Code Support
+#
+
+#
+# PHY Tool
+#
+
+#
+# Power Off
+#
+# CONFIG_SYSTEM_POWEROFF is not set
+
+#
+# RAMTRON
+#
+# CONFIG_SYSTEM_RAMTRON is not set
+
+#
+# SD Card
+#
+# CONFIG_SYSTEM_SDCARD is not set
+
+#
+# Sudoku
+#
+# CONFIG_SYSTEM_SUDOKU is not set
+
+#
+# Sysinfo
+#
+# CONFIG_SYSTEM_SYSINFO is not set
+
+#
+# VI Work-Alike Editor
+#
+# CONFIG_SYSTEM_VI is not set
+
+#
+# Stack Monitor
+#
+
+#
+# USB CDC/ACM Device Commands
+#
+
+#
+# USB Composite Device Commands
+#
+
+#
+# USB Mass Storage Device Commands
+#
+
+#
+# USB Monitor
+#
+
+#
+# Zmodem Commands
+#
+# CONFIG_SYSTEM_ZMODEM is not set
diff --git a/nuttx/configs/px4fmu-v2/kostest/setenv.sh b/nuttx/configs/px4fmu-v2/kostest/setenv.sh
new file mode 100755
index 000000000..6ced112dd
--- /dev/null
+++ b/nuttx/configs/px4fmu-v2/kostest/setenv.sh
@@ -0,0 +1,76 @@
+#!/bin/bash
+# configs/stm32f4discovery/kostest/setenv.sh
+#
+#   Copyright (C) 2011-2012 Gregory Nutt. All rights reserved.
+#   Author: Gregory Nutt <gnutt@nuttx.org>
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions
+# are met:
+#
+# 1. Redistributions of source code must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+# 2. Redistributions in binary form must reproduce the above copyright
+#    notice, this list of conditions and the following disclaimer in
+#    the documentation and/or other materials provided with the
+#    distribution.
+# 3. Neither the name NuttX nor the names of its contributors may be
+#    used to endorse or promote products derived from this software
+#    without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+#
+
+if [ "$_" = "$0" ] ; then
+  echo "You must source this script, not run it!" 1>&2
+  exit 1
+fi
+
+WD=`pwd`
+if [ ! -x "setenv.sh" ]; then
+  echo "This script must be executed from the top-level NuttX build directory"
+  exit 1
+fi
+
+if [ -z "${PATH_ORIG}" ]; then
+  export PATH_ORIG="${PATH}"
+fi
+
+# This is the Cygwin path to the location where I installed the RIDE
+# toolchain under windows.  You will also have to edit this if you install
+# the RIDE toolchain in any other location
+#export TOOLCHAIN_BIN="/cygdrive/c/Program Files (x86)/Raisonance/Ride/arm-gcc/bin"
+
+# This is the Cygwin path to the location where I installed the CodeSourcery
+# toolchain under windows.  You will also have to edit this if you install
+# the CodeSourcery toolchain in any other location
+export TOOLCHAIN_BIN="/cygdrive/c/Program Files (x86)/CodeSourcery/Sourcery G++ Lite/bin"
+#export TOOLCHAIN_BIN="/cygdrive/c/Users/MyName/MentorGraphics/Sourcery_CodeBench_Lite_for_ARM_EABI/bin"
+
+# These are the Cygwin paths to the locations where I installed the Atollic
+# toolchain under windows.  You will also have to edit this if you install
+# the Atollic toolchain in any other location.  /usr/bin is added before
+# the Atollic bin path because there is are binaries named gcc.exe and g++.exe
+# at those locations as well.
+#export TOOLCHAIN_BIN="/usr/bin:/cygdrive/c/Program Files (x86)/Atollic/TrueSTUDIO for ARM Pro 2.3.0/ARMTools/bin"
+#export TOOLCHAIN_BIN="/usr/bin:/cygdrive/c/Program Files (x86)/Atollic/TrueSTUDIO for STMicroelectronics STM32 Lite 2.3.0/ARMTools/bin"
+
+# This is the Cygwin path to the location where I build the buildroot
+# toolchain.
+#export TOOLCHAIN_BIN="${WD}/../misc/buildroot/build_arm_nofpu/staging_dir/bin"
+
+# Add the path to the toolchain to the PATH varialble
+export PATH="${TOOLCHAIN_BIN}:/sbin:/usr/sbin:${PATH_ORIG}"
+
+echo "PATH : ${PATH}"
diff --git a/nuttx/configs/px4fmu-v2/netnsh/Make.defs b/nuttx/configs/px4fmu-v2/netnsh/Make.defs
new file mode 100644
index 000000000..b6e8abd09
--- /dev/null
+++ b/nuttx/configs/px4fmu-v2/netnsh/Make.defs
@@ -0,0 +1,112 @@
+############################################################################
+# configs/stm32f4discovery/netnsh/Make.defs
+#
+#   Copyright (C) 2014 Gregory Nutt. All rights reserved.
+#   Author: Gregory Nutt <gnutt@nuttx.org>
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions
+# are met:
+#
+# 1. Redistributions of source code must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+# 2. Redistributions in binary form must reproduce the above copyright
+#    notice, this list of conditions and the following disclaimer in
+#    the documentation and/or other materials provided with the
+#    distribution.
+# 3. Neither the name NuttX nor the names of its contributors may be
+#    used to endorse or promote products derived from this software
+#    without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+#
+############################################################################
+
+include ${TOPDIR}/.config
+include ${TOPDIR}/tools/Config.mk
+include ${TOPDIR}/arch/arm/src/armv7-m/Toolchain.defs
+
+LDSCRIPT = ld.script
+
+ifeq ($(WINTOOL),y)
+  # Windows-native toolchains
+  DIRLINK = $(TOPDIR)/tools/copydir.sh
+  DIRUNLINK = $(TOPDIR)/tools/unlink.sh
+  MKDEP = $(TOPDIR)/tools/mknulldeps.sh
+  ARCHINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}"
+  ARCHXXINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}" -isystem "${shell cygpath -w $(TOPDIR)/include/cxx}"
+  ARCHSCRIPT = -T "${shell cygpath -w $(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/scripts/$(LDSCRIPT)}"
+else
+  # Linux/Cygwin-native toolchain
+  MKDEP = $(TOPDIR)/tools/mkdeps.sh
+  ARCHINCLUDES = -I. -isystem $(TOPDIR)/include
+  ARCHXXINCLUDES = -I. -isystem $(TOPDIR)/include -isystem $(TOPDIR)/include/cxx
+  ARCHSCRIPT = -T$(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/scripts/$(LDSCRIPT)
+endif
+
+CC = $(CROSSDEV)gcc
+CXX = $(CROSSDEV)g++
+CPP = $(CROSSDEV)gcc -E
+LD = $(CROSSDEV)ld
+AR = $(ARCROSSDEV)ar rcs
+NM = $(ARCROSSDEV)nm
+OBJCOPY = $(CROSSDEV)objcopy
+OBJDUMP = $(CROSSDEV)objdump
+
+ARCHCCVERSION = ${shell $(CC) -v 2>&1 | sed -n '/^gcc version/p' | sed -e 's/^gcc version \([0-9\.]\)/\1/g' -e 's/[-\ ].*//g' -e '1q'}
+ARCHCCMAJOR = ${shell echo $(ARCHCCVERSION) | cut -d'.' -f1}
+
+ifeq ($(CONFIG_DEBUG_SYMBOLS),y)
+  ARCHOPTIMIZATION = -g
+endif
+
+ifneq ($(CONFIG_DEBUG_NOOPT),y)
+  ARCHOPTIMIZATION += $(MAXOPTIMIZATION) -fno-strict-aliasing -fno-strength-reduce -fomit-frame-pointer
+endif
+
+ARCHCFLAGS = -fno-builtin
+ARCHCXXFLAGS = -fno-builtin -fno-exceptions -fno-rtti
+ARCHWARNINGS = -Wall -Wstrict-prototypes -Wshadow
+ARCHWARNINGSXX = -Wall -Wshadow
+ARCHDEFINES =
+ARCHPICFLAGS = -fpic -msingle-pic-base -mpic-register=r10
+
+CFLAGS = $(ARCHCFLAGS) $(ARCHWARNINGS) $(ARCHOPTIMIZATION) $(ARCHCPUFLAGS) $(ARCHINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES) -pipe
+CPICFLAGS = $(ARCHPICFLAGS) $(CFLAGS)
+CXXFLAGS = $(ARCHCXXFLAGS) $(ARCHWARNINGSXX) $(ARCHOPTIMIZATION) $(ARCHCPUFLAGS) $(ARCHXXINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES) -pipe
+CXXPICFLAGS = $(ARCHPICFLAGS) $(CXXFLAGS)
+CPPFLAGS = $(ARCHINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES)
+AFLAGS = $(CFLAGS) -D__ASSEMBLY__
+
+NXFLATLDFLAGS1 = -r -d -warn-common
+NXFLATLDFLAGS2 = $(NXFLATLDFLAGS1) -T$(TOPDIR)/binfmt/libnxflat/gnu-nxflat-pcrel.ld -no-check-sections
+LDNXFLATFLAGS = -e main -s 2048
+
+OBJEXT = .o
+LIBEXT = .a
+EXEEXT =
+
+ifneq ($(CROSSDEV),arm-nuttx-elf-)
+  LDFLAGS += -nostartfiles -nodefaultlibs
+endif
+ifeq ($(CONFIG_DEBUG_SYMBOLS),y)
+  LDFLAGS += -g
+endif
+
+
+HOSTCC = gcc
+HOSTINCLUDES = -I.
+HOSTCFLAGS = -Wall -Wstrict-prototypes -Wshadow -g -pipe
+HOSTLDFLAGS =
+
diff --git a/nuttx/configs/px4fmu-v2/netnsh/defconfig b/nuttx/configs/px4fmu-v2/netnsh/defconfig
new file mode 100644
index 000000000..9c0c220f0
--- /dev/null
+++ b/nuttx/configs/px4fmu-v2/netnsh/defconfig
@@ -0,0 +1,1257 @@
+#
+# Automatically generated file; DO NOT EDIT.
+# Nuttx/ Configuration
+#
+
+#
+# Build Setup
+#
+# CONFIG_EXPERIMENTAL is not set
+# CONFIG_DEFAULT_SMALL is not set
+# CONFIG_HOST_LINUX is not set
+# CONFIG_HOST_OSX is not set
+CONFIG_HOST_WINDOWS=y
+# CONFIG_HOST_OTHER is not set
+# CONFIG_WINDOWS_NATIVE is not set
+CONFIG_WINDOWS_CYGWIN=y
+# CONFIG_WINDOWS_MSYS is not set
+# CONFIG_WINDOWS_OTHER is not set
+
+#
+# Build Configuration
+#
+# CONFIG_APPS_DIR="../apps"
+CONFIG_BUILD_FLAT=y
+# CONFIG_BUILD_2PASS is not set
+
+#
+# Binary Output Formats
+#
+# CONFIG_RRLOAD_BINARY is not set
+CONFIG_INTELHEX_BINARY=y
+# CONFIG_MOTOROLA_SREC is not set
+CONFIG_RAW_BINARY=y
+# CONFIG_UBOOT_UIMAGE is not set
+
+#
+# Customize Header Files
+#
+# CONFIG_ARCH_STDINT_H is not set
+# CONFIG_ARCH_STDBOOL_H is not set
+# CONFIG_ARCH_MATH_H is not set
+# CONFIG_ARCH_FLOAT_H is not set
+# CONFIG_ARCH_STDARG_H is not set
+
+#
+# Debug Options
+#
+# CONFIG_DEBUG is not set
+CONFIG_ARCH_HAVE_STACKCHECK=y
+CONFIG_ARCH_HAVE_HEAPCHECK=y
+# CONFIG_DEBUG_SYMBOLS is not set
+CONFIG_ARCH_HAVE_CUSTOMOPT=y
+# CONFIG_DEBUG_NOOPT is not set
+# CONFIG_DEBUG_CUSTOMOPT is not set
+CONFIG_DEBUG_FULLOPT=y
+
+#
+# System Type
+#
+CONFIG_ARCH_ARM=y
+# CONFIG_ARCH_AVR is not set
+# CONFIG_ARCH_HC is not set
+# CONFIG_ARCH_MIPS is not set
+# CONFIG_ARCH_RGMP is not set
+# CONFIG_ARCH_SH is not set
+# CONFIG_ARCH_SIM is not set
+# CONFIG_ARCH_X86 is not set
+# CONFIG_ARCH_Z16 is not set
+# CONFIG_ARCH_Z80 is not set
+CONFIG_ARCH="arm"
+
+#
+# ARM Options
+#
+# CONFIG_ARCH_CHIP_A1X is not set
+# CONFIG_ARCH_CHIP_C5471 is not set
+# CONFIG_ARCH_CHIP_CALYPSO is not set
+# CONFIG_ARCH_CHIP_DM320 is not set
+# CONFIG_ARCH_CHIP_IMX is not set
+# CONFIG_ARCH_CHIP_KINETIS is not set
+# CONFIG_ARCH_CHIP_KL is not set
+# CONFIG_ARCH_CHIP_LM is not set
+# CONFIG_ARCH_CHIP_TIVA is not set
+# CONFIG_ARCH_CHIP_LPC17XX is not set
+# CONFIG_ARCH_CHIP_LPC214X is not set
+# CONFIG_ARCH_CHIP_LPC2378 is not set
+# CONFIG_ARCH_CHIP_LPC31XX is not set
+# CONFIG_ARCH_CHIP_LPC43XX is not set
+# CONFIG_ARCH_CHIP_NUC1XX is not set
+# CONFIG_ARCH_CHIP_SAMA5 is not set
+# CONFIG_ARCH_CHIP_SAMD is not set
+# CONFIG_ARCH_CHIP_SAM34 is not set
+CONFIG_ARCH_CHIP_STM32=y
+# CONFIG_ARCH_CHIP_STR71X is not set
+# CONFIG_ARCH_ARM7TDMI is not set
+# CONFIG_ARCH_ARM926EJS is not set
+# CONFIG_ARCH_ARM920T is not set
+# CONFIG_ARCH_CORTEXM0 is not set
+# CONFIG_ARCH_CORTEXM3 is not set
+CONFIG_ARCH_CORTEXM4=y
+# CONFIG_ARCH_CORTEXA5 is not set
+# CONFIG_ARCH_CORTEXA8 is not set
+CONFIG_ARCH_FAMILY="armv7-m"
+CONFIG_ARCH_CHIP="stm32"
+# CONFIG_ARMV7M_USEBASEPRI is not set
+CONFIG_ARCH_HAVE_CMNVECTOR=y
+# CONFIG_ARMV7M_CMNVECTOR is not set
+CONFIG_ARCH_HAVE_FPU=y
+# CONFIG_ARCH_FPU is not set
+# CONFIG_ARMV7M_MPU is not set
+
+#
+# ARMV7M Configuration Options
+#
+# CONFIG_ARMV7M_TOOLCHAIN_ATOLLIC is not set
+# CONFIG_ARMV7M_TOOLCHAIN_BUILDROOT is not set
+# CONFIG_ARMV7M_TOOLCHAIN_CODEREDW is not set
+CONFIG_ARMV7M_TOOLCHAIN_CODESOURCERYW=y
+# CONFIG_ARMV7M_TOOLCHAIN_DEVKITARM is not set
+# CONFIG_ARMV7M_TOOLCHAIN_GNU_EABIL is not set
+# CONFIG_ARMV7M_TOOLCHAIN_GNU_EABIW is not set
+# CONFIG_ARMV7M_TOOLCHAIN_RAISONANCE is not set
+# CONFIG_SERIAL_TERMIOS is not set
+CONFIG_SDIO_DMA=y
+CONFIG_SDIO_DMAPRIO=0x00010000
+# CONFIG_SDIO_WIDTH_D1_ONLY is not set
+# CONFIG_NET_MULTICAST is not set
+
+#
+# STM32 Configuration Options
+#
+# CONFIG_ARCH_CHIP_STM32L151C6 is not set
+# CONFIG_ARCH_CHIP_STM32L151C8 is not set
+# CONFIG_ARCH_CHIP_STM32L151CB is not set
+# CONFIG_ARCH_CHIP_STM32L151R6 is not set
+# CONFIG_ARCH_CHIP_STM32L151R8 is not set
+# CONFIG_ARCH_CHIP_STM32L151RB is not set
+# CONFIG_ARCH_CHIP_STM32L151V6 is not set
+# CONFIG_ARCH_CHIP_STM32L151V8 is not set
+# CONFIG_ARCH_CHIP_STM32L151VB is not set
+# CONFIG_ARCH_CHIP_STM32L152C6 is not set
+# CONFIG_ARCH_CHIP_STM32L152C8 is not set
+# CONFIG_ARCH_CHIP_STM32L152CB is not set
+# CONFIG_ARCH_CHIP_STM32L152R6 is not set
+# CONFIG_ARCH_CHIP_STM32L152R8 is not set
+# CONFIG_ARCH_CHIP_STM32L152RB is not set
+# CONFIG_ARCH_CHIP_STM32L152V6 is not set
+# CONFIG_ARCH_CHIP_STM32L152V8 is not set
+# CONFIG_ARCH_CHIP_STM32L152VB is not set
+# CONFIG_ARCH_CHIP_STM32L162ZD is not set
+# CONFIG_ARCH_CHIP_STM32F100C8 is not set
+# CONFIG_ARCH_CHIP_STM32F100CB is not set
+# CONFIG_ARCH_CHIP_STM32F100R8 is not set
+# CONFIG_ARCH_CHIP_STM32F100RB is not set
+# CONFIG_ARCH_CHIP_STM32F100RC is not set
+# CONFIG_ARCH_CHIP_STM32F100RD is not set
+# CONFIG_ARCH_CHIP_STM32F100RE is not set
+# CONFIG_ARCH_CHIP_STM32F100V8 is not set
+# CONFIG_ARCH_CHIP_STM32F100VB is not set
+# CONFIG_ARCH_CHIP_STM32F100VC is not set
+# CONFIG_ARCH_CHIP_STM32F100VD is not set
+# CONFIG_ARCH_CHIP_STM32F100VE is not set
+# CONFIG_ARCH_CHIP_STM32F103T8 is not set
+# CONFIG_ARCH_CHIP_STM32F103TB is not set
+# CONFIG_ARCH_CHIP_STM32F103C4 is not set
+# CONFIG_ARCH_CHIP_STM32F103C8 is not set
+# CONFIG_ARCH_CHIP_STM32F103CB is not set
+# CONFIG_ARCH_CHIP_STM32F103R8 is not set
+# CONFIG_ARCH_CHIP_STM32F103RB is not set
+# CONFIG_ARCH_CHIP_STM32F103RC is not set
+# CONFIG_ARCH_CHIP_STM32F103RD is not set
+# CONFIG_ARCH_CHIP_STM32F103RE is not set
+# CONFIG_ARCH_CHIP_STM32F103V8 is not set
+# CONFIG_ARCH_CHIP_STM32F103VB is not set
+# CONFIG_ARCH_CHIP_STM32F103VC is not set
+# CONFIG_ARCH_CHIP_STM32F103VE is not set
+# CONFIG_ARCH_CHIP_STM32F103ZE is not set
+# CONFIG_ARCH_CHIP_STM32F105VB is not set
+# CONFIG_ARCH_CHIP_STM32F107VC is not set
+# CONFIG_ARCH_CHIP_STM32F207IG is not set
+# CONFIG_ARCH_CHIP_STM32F207ZE is not set
+# CONFIG_ARCH_CHIP_STM32F302CB is not set
+# CONFIG_ARCH_CHIP_STM32F302CC is not set
+# CONFIG_ARCH_CHIP_STM32F302RB is not set
+# CONFIG_ARCH_CHIP_STM32F302RC is not set
+# CONFIG_ARCH_CHIP_STM32F302VB is not set
+# CONFIG_ARCH_CHIP_STM32F302VC is not set
+# CONFIG_ARCH_CHIP_STM32F303CB is not set
+# CONFIG_ARCH_CHIP_STM32F303CC is not set
+# CONFIG_ARCH_CHIP_STM32F303RB is not set
+# CONFIG_ARCH_CHIP_STM32F303RC is not set
+# CONFIG_ARCH_CHIP_STM32F303VB is not set
+# CONFIG_ARCH_CHIP_STM32F303VC is not set
+# CONFIG_ARCH_CHIP_STM32F401RE is not set
+# CONFIG_ARCH_CHIP_STM32F405RG is not set
+# CONFIG_ARCH_CHIP_STM32F405VG is not set
+# CONFIG_ARCH_CHIP_STM32F405ZG is not set
+# CONFIG_ARCH_CHIP_STM32F407VE is not set
+CONFIG_ARCH_CHIP_STM32F407VG=y
+# CONFIG_ARCH_CHIP_STM32F407ZE is not set
+# CONFIG_ARCH_CHIP_STM32F407ZG is not set
+# CONFIG_ARCH_CHIP_STM32F407IE is not set
+# CONFIG_ARCH_CHIP_STM32F407IG is not set
+# CONFIG_ARCH_CHIP_STM32F427V is not set
+# CONFIG_ARCH_CHIP_STM32F427Z is not set
+# CONFIG_ARCH_CHIP_STM32F427I is not set
+# CONFIG_ARCH_CHIP_STM32F429V is not set
+# CONFIG_ARCH_CHIP_STM32F429Z is not set
+# CONFIG_ARCH_CHIP_STM32F429I is not set
+# CONFIG_ARCH_CHIP_STM32F429B is not set
+# CONFIG_ARCH_CHIP_STM32F429N is not set
+# CONFIG_STM32_STM32L15XX is not set
+# CONFIG_STM32_ENERGYLITE is not set
+# CONFIG_STM32_STM32F10XX is not set
+# CONFIG_STM32_VALUELINE is not set
+# CONFIG_STM32_CONNECTIVITYLINE is not set
+# CONFIG_STM32_PERFORMANCELINE is not set
+# CONFIG_STM32_HIGHDENSITY is not set
+# CONFIG_STM32_MEDIUMDENSITY is not set
+# CONFIG_STM32_LOWDENSITY is not set
+# CONFIG_STM32_STM32F20XX is not set
+# CONFIG_STM32_STM32F207 is not set
+# CONFIG_STM32_STM32F30XX is not set
+CONFIG_STM32_STM32F40XX=y
+# CONFIG_STM32_STM32F401 is not set
+# CONFIG_STM32_STM32F405 is not set
+CONFIG_STM32_STM32F407=y
+# CONFIG_STM32_STM32F427 is not set
+# CONFIG_STM32_STM32F429 is not set
+# CONFIG_STM32_DFU is not set
+
+#
+# STM32 Peripheral Support
+#
+CONFIG_STM32_HAVE_CCM=y
+# CONFIG_STM32_HAVE_USBDEV is not set
+CONFIG_STM32_HAVE_OTGFS=y
+CONFIG_STM32_HAVE_FSMC=y
+CONFIG_STM32_HAVE_USART3=y
+CONFIG_STM32_HAVE_UART4=y
+CONFIG_STM32_HAVE_UART5=y
+CONFIG_STM32_HAVE_USART6=y
+# CONFIG_STM32_HAVE_UART7 is not set
+# CONFIG_STM32_HAVE_UART8 is not set
+CONFIG_STM32_HAVE_TIM1=y
+CONFIG_STM32_HAVE_TIM5=y
+CONFIG_STM32_HAVE_TIM6=y
+CONFIG_STM32_HAVE_TIM7=y
+CONFIG_STM32_HAVE_TIM8=y
+CONFIG_STM32_HAVE_TIM9=y
+CONFIG_STM32_HAVE_TIM10=y
+CONFIG_STM32_HAVE_TIM11=y
+CONFIG_STM32_HAVE_TIM12=y
+CONFIG_STM32_HAVE_TIM13=y
+CONFIG_STM32_HAVE_TIM14=y
+# CONFIG_STM32_HAVE_TIM15 is not set
+# CONFIG_STM32_HAVE_TIM16 is not set
+# CONFIG_STM32_HAVE_TIM17 is not set
+CONFIG_STM32_HAVE_ADC2=y
+CONFIG_STM32_HAVE_ADC3=y
+# CONFIG_STM32_HAVE_ADC4 is not set
+CONFIG_STM32_HAVE_CAN1=y
+CONFIG_STM32_HAVE_CAN2=y
+CONFIG_STM32_HAVE_RNG=y
+CONFIG_STM32_HAVE_ETHMAC=y
+# CONFIG_STM32_ADC1 is not set
+# CONFIG_STM32_ADC2 is not set
+# CONFIG_STM32_ADC3 is not set
+# CONFIG_STM32_BKPSRAM is not set
+# CONFIG_STM32_CAN1 is not set
+# CONFIG_STM32_CAN2 is not set
+# CONFIG_STM32_CCMDATARAM is not set
+# CONFIG_STM32_CRC is not set
+# CONFIG_STM32_CRYP is not set
+# CONFIG_STM32_DMA1 is not set
+CONFIG_STM32_DMA2=y
+# CONFIG_STM32_DAC1 is not set
+# CONFIG_STM32_DAC2 is not set
+# CONFIG_STM32_DCMI is not set
+CONFIG_STM32_ETHMAC=y
+# CONFIG_STM32_FSMC is not set
+# CONFIG_STM32_HASH is not set
+# CONFIG_STM32_I2C1 is not set
+# CONFIG_STM32_I2C2 is not set
+# CONFIG_STM32_I2C3 is not set
+# CONFIG_STM32_OTGFS is not set
+# CONFIG_STM32_OTGHS is not set
+CONFIG_STM32_PWR=y
+# CONFIG_STM32_RNG is not set
+CONFIG_STM32_SDIO=y
+CONFIG_STM32_SPI1=y
+# CONFIG_STM32_SPI2 is not set
+# CONFIG_STM32_SPI3 is not set
+CONFIG_STM32_SYSCFG=y
+# CONFIG_STM32_TIM1 is not set
+# CONFIG_STM32_TIM2 is not set
+# CONFIG_STM32_TIM3 is not set
+# CONFIG_STM32_TIM4 is not set
+# CONFIG_STM32_TIM5 is not set
+# CONFIG_STM32_TIM6 is not set
+# CONFIG_STM32_TIM7 is not set
+# CONFIG_STM32_TIM8 is not set
+# CONFIG_STM32_TIM9 is not set
+# CONFIG_STM32_TIM10 is not set
+# CONFIG_STM32_TIM11 is not set
+# CONFIG_STM32_TIM12 is not set
+# CONFIG_STM32_TIM13 is not set
+# CONFIG_STM32_TIM14 is not set
+# CONFIG_STM32_USART1 is not set
+# CONFIG_STM32_USART2 is not set
+# CONFIG_STM32_USART3 is not set
+# CONFIG_STM32_UART4 is not set
+# CONFIG_STM32_UART5 is not set
+CONFIG_STM32_USART6=y
+# CONFIG_STM32_IWDG is not set
+# CONFIG_STM32_WWDG is not set
+CONFIG_STM32_SPI=y
+
+#
+# Alternate Pin Mapping
+#
+# CONFIG_STM32_FLASH_PREFETCH is not set
+# CONFIG_STM32_JTAG_DISABLE is not set
+# CONFIG_STM32_JTAG_FULL_ENABLE is not set
+# CONFIG_STM32_JTAG_NOJNTRST_ENABLE is not set
+CONFIG_STM32_JTAG_SW_ENABLE=y
+# CONFIG_STM32_DISABLE_IDLE_SLEEP_DURING_DEBUG is not set
+# CONFIG_STM32_FORCEPOWER is not set
+# CONFIG_ARCH_BOARD_STM32_CUSTOM_CLOCKCONFIG is not set
+CONFIG_STM32_CCMEXCLUDE=y
+CONFIG_STM32_DMACAPABLE=y
+CONFIG_STM32_USART=y
+
+#
+# U[S]ART Configuration
+#
+# CONFIG_USART6_RS485 is not set
+# CONFIG_USART6_RXDMA is not set
+# CONFIG_SERIAL_DISABLE_REORDERING is not set
+# CONFIG_STM32_USART_SINGLEWIRE is not set
+
+#
+# SPI Configuration
+#
+# CONFIG_STM32_SPI_INTERRUPTS is not set
+# CONFIG_STM32_SPI_DMA is not set
+
+#
+# SDIO Configuration
+#
+
+#
+# Ethernet MAC configuration
+#
+CONFIG_STM32_PHYADDR=0
+# CONFIG_STM32_PHYINIT is not set
+# CONFIG_STM32_MII is not set
+CONFIG_STM32_AUTONEG=y
+CONFIG_STM32_PHYSR=31
+CONFIG_STM32_PHYSR_ALTCONFIG=y
+CONFIG_STM32_PHYSR_ALTMODE=0x001c
+CONFIG_STM32_PHYSR_10HD=0x0004
+CONFIG_STM32_PHYSR_100HD=0x0008
+CONFIG_STM32_PHYSR_10FD=0x0014
+CONFIG_STM32_PHYSR_100FD=0x0018
+# CONFIG_STM32_ETH_PTP is not set
+CONFIG_STM32_RMII=y
+# CONFIG_STM32_RMII_MCO1 is not set
+# CONFIG_STM32_RMII_MCO2 is not set
+CONFIG_STM32_RMII_EXTCLK=y
+
+#
+# USB Host Configuration
+#
+
+#
+# USB Device Configuration
+#
+
+#
+# Architecture Options
+#
+# CONFIG_ARCH_NOINTC is not set
+# CONFIG_ARCH_VECNOTIRQ is not set
+CONFIG_ARCH_DMA=y
+CONFIG_ARCH_HAVE_IRQPRIO=y
+# CONFIG_ARCH_L2CACHE is not set
+# CONFIG_ARCH_HAVE_COHERENT_DCACHE is not set
+# CONFIG_ARCH_HAVE_ADDRENV is not set
+# CONFIG_ARCH_NEED_ADDRENV_MAPPING is not set
+CONFIG_ARCH_HAVE_VFORK=y
+# CONFIG_ARCH_HAVE_MMU is not set
+CONFIG_ARCH_HAVE_MPU=y
+# CONFIG_ARCH_NAND_HWECC is not set
+# CONFIG_ARCH_HAVE_EXTCLK is not set
+# CONFIG_ARCH_USE_MPU is not set
+# CONFIG_ARCH_IRQPRIO is not set
+CONFIG_ARCH_STACKDUMP=y
+# CONFIG_ENDIAN_BIG is not set
+# CONFIG_ARCH_IDLE_CUSTOM is not set
+# CONFIG_ARCH_HAVE_RAMFUNCS is not set
+CONFIG_ARCH_HAVE_RAMVECTORS=y
+# CONFIG_ARCH_RAMVECTORS is not set
+
+#
+# Board Settings
+#
+CONFIG_BOARD_LOOPSPERMSEC=16717
+# CONFIG_ARCH_CALIBRATION is not set
+
+#
+# Interrupt options
+#
+CONFIG_ARCH_HAVE_INTERRUPTSTACK=y
+CONFIG_ARCH_INTERRUPTSTACK=0
+CONFIG_ARCH_HAVE_HIPRI_INTERRUPT=y
+# CONFIG_ARCH_HIPRI_INTERRUPT is not set
+
+#
+# Boot options
+#
+# CONFIG_BOOT_RUNFROMEXTSRAM is not set
+CONFIG_BOOT_RUNFROMFLASH=y
+# CONFIG_BOOT_RUNFROMISRAM is not set
+# CONFIG_BOOT_RUNFROMSDRAM is not set
+# CONFIG_BOOT_COPYTORAM is not set
+
+#
+# Boot Memory Configuration
+#
+CONFIG_RAM_START=0x20000000
+CONFIG_RAM_SIZE=114688
+# CONFIG_ARCH_HAVE_SDRAM is not set
+
+#
+# Board Selection
+#
+CONFIG_ARCH_BOARD_STM32F4_DISCOVERY=y
+# CONFIG_ARCH_BOARD_MIKROE_STM32F4 is not set
+# CONFIG_ARCH_BOARD_CUSTOM is not set
+CONFIG_ARCH_BOARD="stm32f4discovery"
+
+#
+# Common Board Options
+#
+CONFIG_ARCH_HAVE_LEDS=y
+CONFIG_ARCH_LEDS=y
+CONFIG_ARCH_HAVE_BUTTONS=y
+CONFIG_ARCH_BUTTONS=y
+CONFIG_ARCH_HAVE_IRQBUTTONS=y
+# CONFIG_ARCH_IRQBUTTONS is not set
+CONFIG_NSH_MMCSDMINOR=0
+CONFIG_NSH_MMCSDSLOTNO=0
+
+#
+# Board-Specific Options
+#
+CONFIG_STM32F4DISBB=y
+
+#
+# RTOS Features
+#
+CONFIG_DISABLE_OS_API=y
+# CONFIG_DISABLE_POSIX_TIMERS is not set
+# CONFIG_DISABLE_PTHREAD is not set
+# CONFIG_DISABLE_SIGNALS is not set
+# CONFIG_DISABLE_MQUEUE is not set
+# CONFIG_DISABLE_ENVIRON is not set
+
+#
+# Clocks and Timers
+#
+CONFIG_USEC_PER_TICK=10000
+# CONFIG_SYSTEM_TIME64 is not set
+# CONFIG_CLOCK_MONOTONIC is not set
+# CONFIG_JULIAN_TIME is not set
+CONFIG_START_YEAR=2014
+CONFIG_START_MONTH=9
+CONFIG_START_DAY=13
+CONFIG_MAX_WDOGPARMS=2
+CONFIG_PREALLOC_WDOGS=16
+CONFIG_WDOG_INTRESERVE=4
+CONFIG_PREALLOC_TIMERS=4
+
+#
+# Tasks and Scheduling
+#
+# CONFIG_INIT_NONE is not set
+CONFIG_INIT_ENTRYPOINT=y
+# CONFIG_INIT_FILEPATH is not set
+CONFIG_USER_ENTRYPOINT="nsh_main"
+CONFIG_RR_INTERVAL=200
+CONFIG_TASK_NAME_SIZE=0
+CONFIG_MAX_TASK_ARGS=4
+CONFIG_MAX_TASKS=16
+# CONFIG_SCHED_HAVE_PARENT is not set
+CONFIG_SCHED_WAITPID=y
+
+#
+# Pthread Options
+#
+# CONFIG_MUTEX_TYPES is not set
+CONFIG_NPTHREAD_KEYS=4
+
+#
+# Performance Monitoring
+#
+# CONFIG_SCHED_CPULOAD is not set
+# CONFIG_SCHED_INSTRUMENTATION is not set
+
+#
+# Files and I/O
+#
+CONFIG_DEV_CONSOLE=y
+# CONFIG_FDCLONE_DISABLE is not set
+# CONFIG_FDCLONE_STDIO is not set
+CONFIG_SDCLONE_DISABLE=y
+CONFIG_NFILE_DESCRIPTORS=8
+CONFIG_NFILE_STREAMS=8
+CONFIG_NAME_MAX=32
+# CONFIG_PRIORITY_INHERITANCE is not set
+
+#
+# RTOS hooks
+#
+# CONFIG_BOARD_INITIALIZE is not set
+# CONFIG_SCHED_STARTHOOK is not set
+# CONFIG_SCHED_ATEXIT is not set
+# CONFIG_SCHED_ONEXIT is not set
+
+#
+# Signal Numbers
+#
+CONFIG_SIG_SIGUSR1=1
+CONFIG_SIG_SIGUSR2=2
+CONFIG_SIG_SIGALARM=3
+CONFIG_SIG_SIGCONDTIMEDOUT=16
+CONFIG_SIG_SIGWORK=17
+
+#
+# POSIX Message Queue Options
+#
+CONFIG_PREALLOC_MQ_MSGS=4
+CONFIG_MQ_MAXMSGSIZE=32
+
+#
+# Stack and heap information
+#
+CONFIG_IDLETHREAD_STACKSIZE=1024
+CONFIG_USERMAIN_STACKSIZE=2048
+CONFIG_PTHREAD_STACK_MIN=256
+CONFIG_PTHREAD_STACK_DEFAULT=2048
+# CONFIG_LIB_SYSCALL is not set
+
+#
+# Device Drivers
+#
+CONFIG_DISABLE_POLL=y
+CONFIG_DEV_NULL=y
+# CONFIG_DEV_ZERO is not set
+# CONFIG_LOOP is not set
+
+#
+# Buffering
+#
+# CONFIG_DRVR_WRITEBUFFER is not set
+# CONFIG_DRVR_READAHEAD is not set
+# CONFIG_RAMDISK is not set
+# CONFIG_CAN is not set
+# CONFIG_ARCH_HAVE_PWM_PULSECOUNT is not set
+# CONFIG_PWM is not set
+CONFIG_ARCH_HAVE_I2CRESET=y
+# CONFIG_I2C is not set
+CONFIG_SPI=y
+# CONFIG_SPI_OWNBUS is not set
+CONFIG_SPI_EXCHANGE=y
+# CONFIG_SPI_CMDDATA is not set
+# CONFIG_SPI_BITBANG is not set
+# CONFIG_I2S is not set
+# CONFIG_RTC is not set
+# CONFIG_WATCHDOG is not set
+# CONFIG_TIMER is not set
+# CONFIG_ANALOG is not set
+# CONFIG_AUDIO_DEVICES is not set
+# CONFIG_VIDEO_DEVICES is not set
+# CONFIG_BCH is not set
+# CONFIG_INPUT is not set
+# CONFIG_LCD is not set
+CONFIG_MMCSD=y
+CONFIG_MMCSD_NSLOTS=1
+# CONFIG_MMCSD_READONLY is not set
+CONFIG_MMCSD_MULTIBLOCK_DISABLE=y
+# CONFIG_MMCSD_MMCSUPPORT is not set
+CONFIG_MMCSD_HAVECARDDETECT=y
+# CONFIG_MMCSD_SPI is not set
+CONFIG_ARCH_HAVE_SDIO=y
+CONFIG_MMCSD_SDIO=y
+CONFIG_SDIO_PREFLIGHT=y
+# CONFIG_SDIO_MUXBUS is not set
+# CONFIG_SDIO_BLOCKSETUP is not set
+# CONFIG_MTD is not set
+CONFIG_NETDEVICES=y
+
+#
+# General Ethernet MAC Driver Options
+#
+# CONFIG_NETDEV_MULTINIC is not set
+
+#
+# External Ethernet MAC Device Support
+#
+# CONFIG_NET_DM90x0 is not set
+# CONFIG_ENC28J60 is not set
+# CONFIG_ENCX24J600 is not set
+# CONFIG_NET_E1000 is not set
+# CONFIG_NET_SLIP is not set
+# CONFIG_NET_VNET is not set
+
+#
+# External Ethernet PHY Device Support
+#
+# CONFIG_ARCH_PHY_INTERRUPT is not set
+# CONFIG_ETH0_PHY_NONE is not set
+# CONFIG_ETH0_PHY_AM79C874 is not set
+# CONFIG_ETH0_PHY_KS8721 is not set
+# CONFIG_ETH0_PHY_KSZ8051 is not set
+# CONFIG_ETH0_PHY_KSZ8081 is not set
+# CONFIG_ETH0_PHY_KSZ90x1 is not set
+# CONFIG_ETH0_PHY_DP83848C is not set
+CONFIG_ETH0_PHY_LAN8720=y
+# CONFIG_ETH0_PHY_DM9161 is not set
+# CONFIG_PIPES is not set
+# CONFIG_PM is not set
+# CONFIG_POWER is not set
+# CONFIG_SENSORS is not set
+# CONFIG_SERCOMM_CONSOLE is not set
+CONFIG_SERIAL=y
+# CONFIG_DEV_LOWCONSOLE is not set
+# CONFIG_16550_UART is not set
+# CONFIG_ARCH_HAVE_UART is not set
+# CONFIG_ARCH_HAVE_UART0 is not set
+# CONFIG_ARCH_HAVE_UART1 is not set
+# CONFIG_ARCH_HAVE_UART2 is not set
+# CONFIG_ARCH_HAVE_UART3 is not set
+# CONFIG_ARCH_HAVE_UART4 is not set
+# CONFIG_ARCH_HAVE_UART5 is not set
+# CONFIG_ARCH_HAVE_UART6 is not set
+# CONFIG_ARCH_HAVE_UART7 is not set
+# CONFIG_ARCH_HAVE_UART8 is not set
+# CONFIG_ARCH_HAVE_SCI0 is not set
+# CONFIG_ARCH_HAVE_SCI1 is not set
+# CONFIG_ARCH_HAVE_USART0 is not set
+# CONFIG_ARCH_HAVE_USART1 is not set
+# CONFIG_ARCH_HAVE_USART2 is not set
+# CONFIG_ARCH_HAVE_USART3 is not set
+# CONFIG_ARCH_HAVE_USART4 is not set
+# CONFIG_ARCH_HAVE_USART5 is not set
+CONFIG_ARCH_HAVE_USART6=y
+# CONFIG_ARCH_HAVE_USART7 is not set
+# CONFIG_ARCH_HAVE_USART8 is not set
+
+#
+# USART Configuration
+#
+CONFIG_USART6_ISUART=y
+CONFIG_MCU_SERIAL=y
+CONFIG_STANDARD_SERIAL=y
+CONFIG_USART6_SERIAL_CONSOLE=y
+# CONFIG_NO_SERIAL_CONSOLE is not set
+
+#
+# USART6 Configuration
+#
+CONFIG_USART6_RXBUFSIZE=64
+CONFIG_USART6_TXBUFSIZE=64
+CONFIG_USART6_BAUD=115200
+CONFIG_USART6_BITS=8
+CONFIG_USART6_PARITY=0
+CONFIG_USART6_2STOP=0
+# CONFIG_USART6_IFLOWCONTROL is not set
+# CONFIG_USART6_OFLOWCONTROL is not set
+# CONFIG_SERIAL_IFLOWCONTROL is not set
+# CONFIG_SERIAL_OFLOWCONTROL is not set
+# CONFIG_USBDEV is not set
+# CONFIG_USBHOST is not set
+# CONFIG_WIRELESS is not set
+
+#
+# System Logging Device Options
+#
+
+#
+# System Logging
+#
+# CONFIG_RAMLOG is not set
+
+#
+# Networking Support
+#
+CONFIG_ARCH_HAVE_NET=y
+CONFIG_ARCH_HAVE_PHY=y
+CONFIG_NET=y
+# CONFIG_NET_NOINTS is not set
+CONFIG_NET_MULTIBUFFER=y
+# CONFIG_NET_PROMISCUOUS is not set
+CONFIG_NET_BUFSIZE=590
+CONFIG_NET_RECEIVE_WINDOW=536
+CONFIG_NET_GUARDSIZE=2
+
+#
+# Socket Support
+#
+CONFIG_NSOCKET_DESCRIPTORS=8
+CONFIG_NET_NACTIVESOCKETS=16
+CONFIG_NET_SOCKOPTS=y
+CONFIG_NET_SOLINGER=y
+
+#
+# Network Device Operations
+#
+# CONFIG_NETDEV_PHY_IOCTL is not set
+
+#
+# Raw Socket Support
+#
+# CONFIG_NET_PKT is not set
+
+#
+# TCP/IP Networking
+#
+CONFIG_NET_TCP=y
+# CONFIG_NET_TCPURGDATA is not set
+CONFIG_NET_TCP_CONNS=8
+CONFIG_NET_MAX_LISTENPORTS=20
+CONFIG_NET_TCP_READAHEAD=y
+CONFIG_NET_TCP_WRITE_BUFFERS=y
+CONFIG_NET_TCP_NWRBCHAINS=8
+CONFIG_NET_TCP_RECVDELAY=0
+CONFIG_NET_TCPBACKLOG=y
+# CONFIG_NET_SENDFILE is not set
+
+#
+# UDP Networking
+#
+CONFIG_NET_UDP=y
+CONFIG_NET_UDP_CHECKSUMS=y
+CONFIG_NET_UDP_CONNS=8
+CONFIG_NET_BROADCAST=y
+# CONFIG_NET_RXAVAIL is not set
+
+#
+# ICMP Networking Support
+#
+CONFIG_NET_ICMP=y
+CONFIG_NET_ICMP_PING=y
+# CONFIG_NET_PINGADDRCONF is not set
+
+#
+# IGMPv2 Client Support
+#
+# CONFIG_NET_IGMP is not set
+
+#
+# ARP Configuration
+#
+CONFIG_NET_ARP=y
+CONFIG_NET_ARPTAB_SIZE=16
+CONFIG_NET_ARP_MAXAGE=120
+# CONFIG_NET_ARP_IPIN is not set
+CONFIG_NET_ARP_SEND=y
+CONFIG_ARP_SEND_MAXTRIES=5
+CONFIG_ARP_SEND_DELAYMSEC=20
+
+#
+# Network I/O Buffer Support
+#
+CONFIG_NET_IOB=y
+CONFIG_IOB_NBUFFERS=36
+CONFIG_IOB_BUFSIZE=196
+CONFIG_IOB_NCHAINS=8
+CONFIG_IOB_THROTTLE=8
+# CONFIG_NET_ARCH_INCR32 is not set
+# CONFIG_NET_ARCH_CHKSUM is not set
+# CONFIG_NET_STATISTICS is not set
+
+#
+# Routing Table Configuration
+#
+# CONFIG_NET_ROUTE is not set
+CONFIG_NET_ETHERNET=y
+
+#
+# Crypto API
+#
+# CONFIG_CRYPTO is not set
+
+#
+# File Systems
+#
+
+#
+# File system configuration
+#
+# CONFIG_DISABLE_MOUNTPOINT is not set
+# CONFIG_FS_AUTOMOUNTER is not set
+# CONFIG_DISABLE_PSEUDOFS_OPERATIONS is not set
+CONFIG_FS_READABLE=y
+CONFIG_FS_WRITABLE=y
+# CONFIG_FS_RAMMAP is not set
+CONFIG_FS_FAT=y
+CONFIG_FAT_LCNAMES=y
+CONFIG_FAT_LFN=y
+CONFIG_FAT_MAXFNAME=32
+# CONFIG_FS_FATTIME is not set
+# CONFIG_FAT_DMAMEMORY is not set
+# CONFIG_NFS is not set
+# CONFIG_FS_NXFFS is not set
+# CONFIG_FS_ROMFS is not set
+# CONFIG_FS_SMARTFS is not set
+# CONFIG_FS_BINFS is not set
+# CONFIG_FS_PROCFS is not set
+
+#
+# System Logging
+#
+
+# CONFIG_SYSLOG is not set
+
+#
+# Graphics Support
+#
+# CONFIG_NX is not set
+
+#
+# Memory Management
+#
+# CONFIG_MM_SMALL is not set
+CONFIG_MM_REGIONS=1
+# CONFIG_ARCH_HAVE_HEAP2 is not set
+# CONFIG_GRAN is not set
+
+#
+# Audio Support
+#
+# CONFIG_AUDIO is not set
+
+#
+# Binary Formats
+#
+# CONFIG_BINFMT_DISABLE is not set
+# CONFIG_BINFMT_EXEPATH is not set
+# CONFIG_NXFLAT is not set
+# CONFIG_ELF is not set
+CONFIG_BUILTIN=y
+# CONFIG_PIC is not set
+# CONFIG_SYMTAB_ORDEREDBYNAME is not set
+
+#
+# Library Routines
+#
+
+#
+# Standard C Library Options
+#
+CONFIG_STDIO_BUFFER_SIZE=64
+CONFIG_STDIO_LINEBUFFER=y
+CONFIG_NUNGET_CHARS=2
+CONFIG_LIB_HOMEDIR="/"
+# CONFIG_LIBM is not set
+# CONFIG_NOPRINTF_FIELDWIDTH is not set
+# CONFIG_LIBC_FLOATINGPOINT is not set
+CONFIG_LIB_RAND_ORDER=1
+# CONFIG_EOL_IS_CR is not set
+# CONFIG_EOL_IS_LF is not set
+# CONFIG_EOL_IS_BOTH_CRLF is not set
+CONFIG_EOL_IS_EITHER_CRLF=y
+# CONFIG_LIBC_EXECFUNCS is not set
+CONFIG_POSIX_SPAWN_PROXY_STACKSIZE=1024
+CONFIG_TASK_SPAWN_DEFAULT_STACKSIZE=2048
+# CONFIG_LIBC_STRERROR is not set
+# CONFIG_LIBC_PERROR_STDOUT is not set
+CONFIG_ARCH_LOWPUTC=y
+# CONFIG_LIBC_LOCALTIME is not set
+CONFIG_LIB_SENDFILE_BUFSIZE=512
+# CONFIG_ARCH_ROMGETC is not set
+# CONFIG_ARCH_OPTIMIZED_FUNCTIONS is not set
+
+#
+# Non-standard Library Support
+#
+CONFIG_SCHED_WORKQUEUE=y
+CONFIG_SCHED_HPWORK=y
+CONFIG_SCHED_HPWORKPRIORITY=192
+CONFIG_SCHED_HPWORKPERIOD=50000
+CONFIG_SCHED_HPWORKSTACKSIZE=2048
+# CONFIG_SCHED_LPWORK is not set
+# CONFIG_LIB_KBDCODEC is not set
+# CONFIG_LIB_SLCDCODEC is not set
+
+#
+# Basic CXX Support
+#
+# CONFIG_C99_BOOL8 is not set
+CONFIG_HAVE_CXX=y
+CONFIG_HAVE_CXXINITIALIZE=y
+# CONFIG_CXX_NEWLONG is not set
+
+#
+# uClibc++ Standard C++ Library
+#
+# CONFIG_UCLIBCXX is not set
+
+#
+# Application Configuration
+#
+
+#
+# Built-In Applications
+#
+CONFIG_BUILTIN_PROXY_STACKSIZE=1024
+
+#
+# Examples
+#
+# CONFIG_EXAMPLES_BUTTONS is not set
+# CONFIG_EXAMPLES_CAN is not set
+# CONFIG_EXAMPLES_CONFIGDATA is not set
+# CONFIG_EXAMPLES_CPUHOG is not set
+# CONFIG_EXAMPLES_CXXTEST is not set
+# CONFIG_EXAMPLES_DHCPD is not set
+# CONFIG_EXAMPLES_ELF is not set
+# CONFIG_EXAMPLES_FTPC is not set
+# CONFIG_EXAMPLES_FTPD is not set
+# CONFIG_EXAMPLES_HELLO is not set
+# CONFIG_EXAMPLES_HELLOXX is not set
+# CONFIG_EXAMPLES_JSON is not set
+# CONFIG_EXAMPLES_HIDKBD is not set
+# CONFIG_EXAMPLES_KEYPADTEST is not set
+# CONFIG_EXAMPLES_IGMP is not set
+# CONFIG_EXAMPLES_MM is not set
+# CONFIG_EXAMPLES_MODBUS is not set
+# CONFIG_EXAMPLES_MOUNT is not set
+# CONFIG_EXAMPLES_NETTEST is not set
+# CONFIG_EXAMPLES_NRF24L01TERM is not set
+CONFIG_EXAMPLES_NSH=y
+CONFIG_EXAMPLES_NSH_CXXINITIALIZE=y
+# CONFIG_EXAMPLES_NULL is not set
+# CONFIG_EXAMPLES_NX is not set
+# CONFIG_EXAMPLES_NXTERM is not set
+# CONFIG_EXAMPLES_NXFFS is not set
+# CONFIG_EXAMPLES_NXFLAT is not set
+# CONFIG_EXAMPLES_NXHELLO is not set
+# CONFIG_EXAMPLES_NXIMAGE is not set
+# CONFIG_EXAMPLES_NXLINES is not set
+# CONFIG_EXAMPLES_NXTEXT is not set
+# CONFIG_EXAMPLES_OSTEST is not set
+# CONFIG_EXAMPLES_PIPE is not set
+# CONFIG_EXAMPLES_POSIXSPAWN is not set
+# CONFIG_EXAMPLES_QENCODER is not set
+# CONFIG_EXAMPLES_RGMP is not set
+# CONFIG_EXAMPLES_ROMFS is not set
+# CONFIG_EXAMPLES_SENDMAIL is not set
+# CONFIG_EXAMPLES_SERIALBLASTER is not set
+# CONFIG_EXAMPLES_SERIALRX is not set
+# CONFIG_EXAMPLES_SERLOOP is not set
+# CONFIG_EXAMPLES_SLCD is not set
+# CONFIG_EXAMPLES_SMART_TEST is not set
+# CONFIG_EXAMPLES_SMART is not set
+# CONFIG_EXAMPLES_TCPECHO is not set
+# CONFIG_EXAMPLES_TELNETD is not set
+# CONFIG_EXAMPLES_THTTPD is not set
+# CONFIG_EXAMPLES_TIFF is not set
+# CONFIG_EXAMPLES_TOUCHSCREEN is not set
+# CONFIG_EXAMPLES_UDP is not set
+# CONFIG_EXAMPLES_DISCOVER is not set
+# CONFIG_EXAMPLES_WEBSERVER is not set
+# CONFIG_EXAMPLES_USBSERIAL is not set
+# CONFIG_EXAMPLES_USBTERM is not set
+# CONFIG_EXAMPLES_WATCHDOG is not set
+
+#
+# Graphics Support
+#
+# CONFIG_TIFF is not set
+
+#
+# Interpreters
+#
+# CONFIG_INTERPRETERS_FICL is not set
+# CONFIG_INTERPRETERS_PCODE is not set
+
+#
+# Network Utilities
+#
+
+#
+# Networking Utilities
+#
+# CONFIG_NETUTILS_CODECS is not set
+# CONFIG_NETUTILS_DHCPC is not set
+# CONFIG_NETUTILS_DHCPD is not set
+# CONFIG_NETUTILS_FTPC is not set
+# CONFIG_NETUTILS_FTPD is not set
+# CONFIG_NETUTILS_JSON is not set
+CONFIG_NETUTILS_DNSCLIENT=y
+CONFIG_NETUTILS_DNSCLIENT_ENTRIES=8
+CONFIG_NETUTILS_DNSCLIENT_MAXRESPONSE=96
+# CONFIG_NETUTILS_SMTP is not set
+CONFIG_NETUTILS_TELNETD=y
+CONFIG_NETUTILS_TFTPC=y
+# CONFIG_NETUTILS_THTTPD is not set
+CONFIG_NETUTILS_NETLIB=y
+CONFIG_NETUTILS_WEBCLIENT=y
+CONFIG_NSH_WGET_USERAGENT="NuttX/6.xx.x (; http://www.nuttx.org/)"
+# CONFIG_NETUTILS_WEBSERVER is not set
+# CONFIG_NETUTILS_NTPCLIENT is not set
+# CONFIG_NETUTILS_DISCOVER is not set
+# CONFIG_NETUTILS_XMLRPC is not set
+
+#
+# FreeModBus
+#
+# CONFIG_MODBUS is not set
+
+#
+# NSH Library
+#
+CONFIG_NSH_LIBRARY=y
+
+#
+# Command Line Configuration
+#
+CONFIG_NSH_READLINE=y
+# CONFIG_NSH_CLE is not set
+CONFIG_NSH_LINELEN=64
+# CONFIG_NSH_DISABLE_SEMICOLON is not set
+# CONFIG_NSH_CMDPARMS is not set
+CONFIG_NSH_MAXARGUMENTS=6
+# CONFIG_NSH_ARGCAT is not set
+CONFIG_NSH_NESTDEPTH=3
+# CONFIG_NSH_DISABLEBG is not set
+CONFIG_NSH_BUILTIN_APPS=y
+
+#
+# Disable Individual commands
+#
+# CONFIG_NSH_DISABLE_ADDROUTE is not set
+# CONFIG_NSH_DISABLE_CAT is not set
+# CONFIG_NSH_DISABLE_CD is not set
+# CONFIG_NSH_DISABLE_CP is not set
+# CONFIG_NSH_DISABLE_CMP is not set
+# CONFIG_NSH_DISABLE_DD is not set
+# CONFIG_NSH_DISABLE_DF is not set
+# CONFIG_NSH_DISABLE_DELROUTE is not set
+# CONFIG_NSH_DISABLE_ECHO is not set
+# CONFIG_NSH_DISABLE_EXEC is not set
+# CONFIG_NSH_DISABLE_EXIT is not set
+# CONFIG_NSH_DISABLE_FREE is not set
+# CONFIG_NSH_DISABLE_GET is not set
+# CONFIG_NSH_DISABLE_HELP is not set
+# CONFIG_NSH_DISABLE_HEXDUMP is not set
+# CONFIG_NSH_DISABLE_IFCONFIG is not set
+# CONFIG_NSH_DISABLE_KILL is not set
+# CONFIG_NSH_DISABLE_LOSETUP is not set
+# CONFIG_NSH_DISABLE_LS is not set
+# CONFIG_NSH_DISABLE_MB is not set
+# CONFIG_NSH_DISABLE_MKDIR is not set
+# CONFIG_NSH_DISABLE_MKFATFS is not set
+# CONFIG_NSH_DISABLE_MKFIFO is not set
+# CONFIG_NSH_DISABLE_MKRD is not set
+# CONFIG_NSH_DISABLE_MH is not set
+# CONFIG_NSH_DISABLE_MOUNT is not set
+# CONFIG_NSH_DISABLE_MW is not set
+# CONFIG_NSH_DISABLE_PS is not set
+# CONFIG_NSH_DISABLE_PING is not set
+# CONFIG_NSH_DISABLE_PUT is not set
+# CONFIG_NSH_DISABLE_PWD is not set
+# CONFIG_NSH_DISABLE_RM is not set
+# CONFIG_NSH_DISABLE_RMDIR is not set
+# CONFIG_NSH_DISABLE_SET is not set
+# CONFIG_NSH_DISABLE_SH is not set
+# CONFIG_NSH_DISABLE_SLEEP is not set
+# CONFIG_NSH_DISABLE_TEST is not set
+# CONFIG_NSH_DISABLE_UMOUNT is not set
+# CONFIG_NSH_DISABLE_UNSET is not set
+# CONFIG_NSH_DISABLE_USLEEP is not set
+# CONFIG_NSH_DISABLE_WGET is not set
+# CONFIG_NSH_DISABLE_XD is not set
+
+#
+# Configure Command Options
+#
+# CONFIG_NSH_CMDOPT_DF_H is not set
+CONFIG_NSH_CODECS_BUFSIZE=128
+# CONFIG_NSH_CMDOPT_HEXDUMP is not set
+CONFIG_NSH_FILEIOSIZE=512
+
+#
+# Scripting Support
+#
+# CONFIG_NSH_DISABLESCRIPT is not set
+# CONFIG_NSH_DISABLE_ITEF is not set
+# CONFIG_NSH_DISABLE_LOOPS is not set
+
+#
+# Console Configuration
+#
+CONFIG_NSH_CONSOLE=y
+CONFIG_NSH_ARCHINIT=y
+
+#
+# Networking Configuration
+#
+# CONFIG_NSH_NETINIT_THREAD is not set
+CONFIG_NSH_IPADDR=0x0a000002
+CONFIG_NSH_DRIPADDR=0x0a000001
+CONFIG_NSH_NETMASK=0xffffff00
+# CONFIG_NSH_DNS is not set
+# CONFIG_NSH_NOMAC is not set
+CONFIG_NSH_MAX_ROUNDTRIP=20
+
+#
+# Telnet Configuration
+#
+CONFIG_NSH_TELNET=y
+CONFIG_NSH_TELNETD_PORT=23
+CONFIG_NSH_TELNETD_DAEMONPRIO=100
+CONFIG_NSH_TELNETD_DAEMONSTACKSIZE=2048
+CONFIG_NSH_TELNETD_CLIENTPRIO=100
+CONFIG_NSH_TELNETD_CLIENTSTACKSIZE=2048
+CONFIG_NSH_IOBUFFER_SIZE=512
+# CONFIG_NSH_TELNET_LOGIN is not set
+
+#
+# NxWidgets/NxWM
+#
+
+#
+# Platform-specific Support
+#
+# CONFIG_PLATFORM_CONFIGDATA is not set
+
+#
+# System Libraries and NSH Add-Ons
+#
+
+#
+# Custom Free Memory Command
+#
+# CONFIG_SYSTEM_FREE is not set
+
+#
+# EMACS-like Command Line Editor
+#
+# CONFIG_SYSTEM_CLE is not set
+
+#
+# FLASH Program Installation
+#
+# CONFIG_SYSTEM_INSTALL is not set
+
+#
+# FLASH Erase-all Command
+#
+
+#
+# Intel HEX to binary conversion
+#
+# CONFIG_SYSTEM_HEX2BIN is not set
+
+#
+# I2C tool
+#
+
+#
+# INI File Parser
+#
+# CONFIG_SYSTEM_INIFILE is not set
+
+#
+# NxPlayer media player library / command Line
+#
+# CONFIG_SYSTEM_NXPLAYER is not set
+
+#
+# RAM test
+#
+# CONFIG_SYSTEM_RAMTEST is not set
+
+#
+# readline()
+#
+CONFIG_SYSTEM_READLINE=y
+CONFIG_READLINE_ECHO=y
+
+#
+# P-Code Support
+#
+
+#
+# PHY Tool
+#
+
+#
+# Power Off
+#
+# CONFIG_SYSTEM_POWEROFF is not set
+
+#
+# RAMTRON
+#
+# CONFIG_SYSTEM_RAMTRON is not set
+
+#
+# SD Card
+#
+# CONFIG_SYSTEM_SDCARD is not set
+
+#
+# Sudoku
+#
+# CONFIG_SYSTEM_SUDOKU is not set
+
+#
+# Sysinfo
+#
+# CONFIG_SYSTEM_SYSINFO is not set
+
+#
+# VI Work-Alike Editor
+#
+# CONFIG_SYSTEM_VI is not set
+
+#
+# Stack Monitor
+#
+
+#
+# USB CDC/ACM Device Commands
+#
+
+#
+# USB Composite Device Commands
+#
+
+#
+# USB Mass Storage Device Commands
+#
+
+#
+# USB Monitor
+#
+
+#
+# Zmodem Commands
+#
+# CONFIG_SYSTEM_ZMODEM is not set
diff --git a/nuttx/configs/px4fmu-v2/netnsh/setenv.sh b/nuttx/configs/px4fmu-v2/netnsh/setenv.sh
new file mode 100755
index 000000000..b4b8a7e35
--- /dev/null
+++ b/nuttx/configs/px4fmu-v2/netnsh/setenv.sh
@@ -0,0 +1,77 @@
+#!/bin/bash
+# configs/stm32f4discovery/netnsh/setenv.sh
+#
+#   Copyright (C) 2014 Gregory Nutt. All rights reserved.
+#   Author: Gregory Nutt <gnutt@nuttx.org>
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions
+# are met:
+#
+# 1. Redistributions of source code must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+# 2. Redistributions in binary form must reproduce the above copyright
+#    notice, this list of conditions and the following disclaimer in
+#    the documentation and/or other materials provided with the
+#    distribution.
+# 3. Neither the name NuttX nor the names of its contributors may be
+#    used to endorse or promote products derived from this software
+#    without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+#
+
+if [ "$_" = "$0" ] ; then
+  echo "You must source this script, not run it!" 1>&2
+  exit 1
+fi
+
+WD=`pwd`
+if [ ! -x "setenv.sh" ]; then
+  echo "This script must be executed from the top-level NuttX build directory"
+  exit 1
+fi
+
+if [ -z "${PATH_ORIG}" ]; then
+  export PATH_ORIG="${PATH}"
+fi
+
+# This is the Cygwin path to the location where I installed the RIDE
+# toolchain under windows.  You will also have to edit this if you install
+# the RIDE toolchain in any other location
+#export TOOLCHAIN_BIN="/cygdrive/c/Program Files (x86)/Raisonance/Ride/arm-gcc/bin"
+
+# This is the Cygwin path to the location where I installed the CodeSourcery
+# toolchain under windows.  You will also have to edit this if you install
+# the CodeSourcery toolchain in any other location
+#export TOOLCHAIN_BIN="/cygdrive/c/Program Files (x86)/CodeSourcery/Sourcery G++ Lite/bin"
+export TOOLCHAIN_BIN="/cygdrive/c/Program Files (x86)/CodeSourcery/Sourcery_CodeBench_Lite_for_ARM_EABI/bin"
+#export TOOLCHAIN_BIN="/cygdrive/c/Users/MyName/MentorGraphics/Sourcery_CodeBench_Lite_for_ARM_EABI/bin"
+
+# These are the Cygwin paths to the locations where I installed the Atollic
+# toolchain under windows.  You will also have to edit this if you install
+# the Atollic toolchain in any other location.  /usr/bin is added before
+# the Atollic bin path because there is are binaries named gcc.exe and g++.exe
+# at those locations as well.
+#export TOOLCHAIN_BIN="/usr/bin:/cygdrive/c/Program Files (x86)/Atollic/TrueSTUDIO for ARM Pro 2.3.0/ARMTools/bin"
+#export TOOLCHAIN_BIN="/usr/bin:/cygdrive/c/Program Files (x86)/Atollic/TrueSTUDIO for STMicroelectronics STM32 Lite 2.3.0/ARMTools/bin"
+
+# This is the Cygwin path to the location where I build the buildroot
+# toolchain.
+#export TOOLCHAIN_BIN="${WD}/../misc/buildroot/build_arm_nofpu/staging_dir/bin"
+
+# Add the path to the toolchain to the PATH varialble
+export PATH="${TOOLCHAIN_BIN}:/sbin:/usr/sbin:${PATH_ORIG}"
+
+echo "PATH : ${PATH}"
diff --git a/nuttx/configs/px4fmu-v2/nsh/Make.defs b/nuttx/configs/px4fmu-v2/nsh/Make.defs
new file mode 100644
index 000000000..0e949076b
--- /dev/null
+++ b/nuttx/configs/px4fmu-v2/nsh/Make.defs
@@ -0,0 +1,112 @@
+############################################################################
+# configs/stm32f4discovery/nsh/Make.defs
+#
+#   Copyright (C) 2011-2012 Gregory Nutt. All rights reserved.
+#   Author: Gregory Nutt <gnutt@nuttx.org>
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions
+# are met:
+#
+# 1. Redistributions of source code must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+# 2. Redistributions in binary form must reproduce the above copyright
+#    notice, this list of conditions and the following disclaimer in
+#    the documentation and/or other materials provided with the
+#    distribution.
+# 3. Neither the name NuttX nor the names of its contributors may be
+#    used to endorse or promote products derived from this software
+#    without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+#
+############################################################################
+
+include ${TOPDIR}/.config
+include ${TOPDIR}/tools/Config.mk
+include ${TOPDIR}/arch/arm/src/armv7-m/Toolchain.defs
+
+LDSCRIPT = ld.script
+
+ifeq ($(WINTOOL),y)
+  # Windows-native toolchains
+  DIRLINK = $(TOPDIR)/tools/copydir.sh
+  DIRUNLINK = $(TOPDIR)/tools/unlink.sh
+  MKDEP = $(TOPDIR)/tools/mknulldeps.sh
+  ARCHINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}"
+  ARCHXXINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}" -isystem "${shell cygpath -w $(TOPDIR)/include/cxx}"
+  ARCHSCRIPT = -T "${shell cygpath -w $(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/scripts/$(LDSCRIPT)}"
+else
+  # Linux/Cygwin-native toolchain
+  MKDEP = $(TOPDIR)/tools/mkdeps.sh
+  ARCHINCLUDES = -I. -isystem $(TOPDIR)/include
+  ARCHXXINCLUDES = -I. -isystem $(TOPDIR)/include -isystem $(TOPDIR)/include/cxx
+  ARCHSCRIPT = -T$(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/scripts/$(LDSCRIPT)
+endif
+
+CC = $(CROSSDEV)gcc
+CXX = $(CROSSDEV)g++
+CPP = $(CROSSDEV)gcc -E
+LD = $(CROSSDEV)ld
+AR = $(ARCROSSDEV)ar rcs
+NM = $(ARCROSSDEV)nm
+OBJCOPY = $(CROSSDEV)objcopy
+OBJDUMP = $(CROSSDEV)objdump
+
+ARCHCCVERSION = ${shell $(CC) -v 2>&1 | sed -n '/^gcc version/p' | sed -e 's/^gcc version \([0-9\.]\)/\1/g' -e 's/[-\ ].*//g' -e '1q'}
+ARCHCCMAJOR = ${shell echo $(ARCHCCVERSION) | cut -d'.' -f1}
+
+ifeq ($(CONFIG_DEBUG_SYMBOLS),y)
+  ARCHOPTIMIZATION = -g
+endif
+
+ifneq ($(CONFIG_DEBUG_NOOPT),y)
+  ARCHOPTIMIZATION += $(MAXOPTIMIZATION) -fno-strict-aliasing -fno-strength-reduce -fomit-frame-pointer
+endif
+
+ARCHCFLAGS = -fno-builtin
+ARCHCXXFLAGS = -fno-builtin -fno-exceptions -fno-rtti
+ARCHWARNINGS = -Wall -Wstrict-prototypes -Wshadow
+ARCHWARNINGSXX = -Wall -Wshadow
+ARCHDEFINES =
+ARCHPICFLAGS = -fpic -msingle-pic-base -mpic-register=r10
+
+CFLAGS = $(ARCHCFLAGS) $(ARCHWARNINGS) $(ARCHOPTIMIZATION) $(ARCHCPUFLAGS) $(ARCHINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES) -pipe
+CPICFLAGS = $(ARCHPICFLAGS) $(CFLAGS)
+CXXFLAGS = $(ARCHCXXFLAGS) $(ARCHWARNINGSXX) $(ARCHOPTIMIZATION) $(ARCHCPUFLAGS) $(ARCHXXINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES) -pipe
+CXXPICFLAGS = $(ARCHPICFLAGS) $(CXXFLAGS)
+CPPFLAGS = $(ARCHINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES)
+AFLAGS = $(CFLAGS) -D__ASSEMBLY__
+
+NXFLATLDFLAGS1 = -r -d -warn-common
+NXFLATLDFLAGS2 = $(NXFLATLDFLAGS1) -T$(TOPDIR)/binfmt/libnxflat/gnu-nxflat-pcrel.ld -no-check-sections
+LDNXFLATFLAGS = -e main -s 2048
+
+OBJEXT = .o
+LIBEXT = .a
+EXEEXT =
+
+ifneq ($(CROSSDEV),arm-nuttx-elf-)
+  LDFLAGS += -nostartfiles -nodefaultlibs
+endif
+ifeq ($(CONFIG_DEBUG_SYMBOLS),y)
+  LDFLAGS += -g
+endif
+
+
+HOSTCC = gcc
+HOSTINCLUDES = -I.
+HOSTCFLAGS = -Wall -Wstrict-prototypes -Wshadow -g -pipe
+HOSTLDFLAGS =
+
diff --git a/nuttx/configs/px4fmu-v2/nsh/defconfig b/nuttx/configs/px4fmu-v2/nsh/defconfig
new file mode 100644
index 000000000..a461b5e0a
--- /dev/null
+++ b/nuttx/configs/px4fmu-v2/nsh/defconfig
@@ -0,0 +1,1075 @@
+#
+# Automatically generated file; DO NOT EDIT.
+# Nuttx/ Configuration
+#
+
+#
+# Build Setup
+#
+# CONFIG_EXPERIMENTAL is not set
+# CONFIG_DEFAULT_SMALL is not set
+# CONFIG_HOST_LINUX is not set
+# CONFIG_HOST_OSX is not set
+CONFIG_HOST_WINDOWS=y
+# CONFIG_HOST_OTHER is not set
+# CONFIG_WINDOWS_NATIVE is not set
+CONFIG_WINDOWS_CYGWIN=y
+# CONFIG_WINDOWS_MSYS is not set
+# CONFIG_WINDOWS_OTHER is not set
+
+#
+# Build Configuration
+#
+# CONFIG_APPS_DIR="../apps"
+CONFIG_BUILD_FLAT=y
+# CONFIG_BUILD_2PASS is not set
+
+#
+# Binary Output Formats
+#
+# CONFIG_RRLOAD_BINARY is not set
+CONFIG_INTELHEX_BINARY=y
+# CONFIG_MOTOROLA_SREC is not set
+CONFIG_RAW_BINARY=y
+# CONFIG_UBOOT_UIMAGE is not set
+
+#
+# Customize Header Files
+#
+# CONFIG_ARCH_STDINT_H is not set
+# CONFIG_ARCH_STDBOOL_H is not set
+# CONFIG_ARCH_MATH_H is not set
+# CONFIG_ARCH_FLOAT_H is not set
+# CONFIG_ARCH_STDARG_H is not set
+
+#
+# Debug Options
+#
+# CONFIG_DEBUG is not set
+CONFIG_ARCH_HAVE_STACKCHECK=y
+CONFIG_ARCH_HAVE_HEAPCHECK=y
+# CONFIG_DEBUG_SYMBOLS is not set
+CONFIG_ARCH_HAVE_CUSTOMOPT=y
+# CONFIG_DEBUG_NOOPT is not set
+# CONFIG_DEBUG_CUSTOMOPT is not set
+CONFIG_DEBUG_FULLOPT=y
+
+#
+# System Type
+#
+CONFIG_ARCH_ARM=y
+# CONFIG_ARCH_AVR is not set
+# CONFIG_ARCH_HC is not set
+# CONFIG_ARCH_MIPS is not set
+# CONFIG_ARCH_RGMP is not set
+# CONFIG_ARCH_SH is not set
+# CONFIG_ARCH_SIM is not set
+# CONFIG_ARCH_X86 is not set
+# CONFIG_ARCH_Z16 is not set
+# CONFIG_ARCH_Z80 is not set
+CONFIG_ARCH="arm"
+
+#
+# ARM Options
+#
+# CONFIG_ARCH_CHIP_A1X is not set
+# CONFIG_ARCH_CHIP_C5471 is not set
+# CONFIG_ARCH_CHIP_CALYPSO is not set
+# CONFIG_ARCH_CHIP_DM320 is not set
+# CONFIG_ARCH_CHIP_EFM32 is not set
+# CONFIG_ARCH_CHIP_IMX is not set
+# CONFIG_ARCH_CHIP_KINETIS is not set
+# CONFIG_ARCH_CHIP_KL is not set
+# CONFIG_ARCH_CHIP_LM is not set
+# CONFIG_ARCH_CHIP_TIVA is not set
+# CONFIG_ARCH_CHIP_LPC17XX is not set
+# CONFIG_ARCH_CHIP_LPC214X is not set
+# CONFIG_ARCH_CHIP_LPC2378 is not set
+# CONFIG_ARCH_CHIP_LPC31XX is not set
+# CONFIG_ARCH_CHIP_LPC43XX is not set
+# CONFIG_ARCH_CHIP_NUC1XX is not set
+# CONFIG_ARCH_CHIP_SAMA5 is not set
+# CONFIG_ARCH_CHIP_SAMD is not set
+# CONFIG_ARCH_CHIP_SAM34 is not set
+CONFIG_ARCH_CHIP_STM32=y
+# CONFIG_ARCH_CHIP_STR71X is not set
+# CONFIG_ARCH_ARM7TDMI is not set
+# CONFIG_ARCH_ARM926EJS is not set
+# CONFIG_ARCH_ARM920T is not set
+# CONFIG_ARCH_CORTEXM0 is not set
+# CONFIG_ARCH_CORTEXM3 is not set
+CONFIG_ARCH_CORTEXM4=y
+# CONFIG_ARCH_CORTEXA5 is not set
+# CONFIG_ARCH_CORTEXA8 is not set
+CONFIG_ARCH_FAMILY="armv7-m"
+CONFIG_ARCH_CHIP="stm32"
+# CONFIG_ARMV7M_USEBASEPRI is not set
+CONFIG_ARCH_HAVE_CMNVECTOR=y
+# CONFIG_ARMV7M_CMNVECTOR is not set
+CONFIG_ARCH_HAVE_FPU=y
+# CONFIG_ARCH_FPU is not set
+# CONFIG_ARMV7M_MPU is not set
+
+#
+# ARMV7M Configuration Options
+#
+# CONFIG_ARMV7M_TOOLCHAIN_ATOLLIC is not set
+# CONFIG_ARMV7M_TOOLCHAIN_BUILDROOT is not set
+# CONFIG_ARMV7M_TOOLCHAIN_CODEREDW is not set
+CONFIG_ARMV7M_TOOLCHAIN_CODESOURCERYW=y
+# CONFIG_ARMV7M_TOOLCHAIN_DEVKITARM is not set
+# CONFIG_ARMV7M_TOOLCHAIN_GNU_EABIL is not set
+# CONFIG_ARMV7M_TOOLCHAIN_GNU_EABIW is not set
+# CONFIG_ARMV7M_TOOLCHAIN_RAISONANCE is not set
+# CONFIG_ARMV7M_ITMSYSLOG is not set
+
+#
+# STM32 Configuration Options
+#
+# CONFIG_ARCH_CHIP_STM32L151C6 is not set
+# CONFIG_ARCH_CHIP_STM32L151C8 is not set
+# CONFIG_ARCH_CHIP_STM32L151CB is not set
+# CONFIG_ARCH_CHIP_STM32L151R6 is not set
+# CONFIG_ARCH_CHIP_STM32L151R8 is not set
+# CONFIG_ARCH_CHIP_STM32L151RB is not set
+# CONFIG_ARCH_CHIP_STM32L151V6 is not set
+# CONFIG_ARCH_CHIP_STM32L151V8 is not set
+# CONFIG_ARCH_CHIP_STM32L151VB is not set
+# CONFIG_ARCH_CHIP_STM32L152C6 is not set
+# CONFIG_ARCH_CHIP_STM32L152C8 is not set
+# CONFIG_ARCH_CHIP_STM32L152CB is not set
+# CONFIG_ARCH_CHIP_STM32L152R6 is not set
+# CONFIG_ARCH_CHIP_STM32L152R8 is not set
+# CONFIG_ARCH_CHIP_STM32L152RB is not set
+# CONFIG_ARCH_CHIP_STM32L152V6 is not set
+# CONFIG_ARCH_CHIP_STM32L152V8 is not set
+# CONFIG_ARCH_CHIP_STM32L152VB is not set
+# CONFIG_ARCH_CHIP_STM32L162ZD is not set
+# CONFIG_ARCH_CHIP_STM32F100C8 is not set
+# CONFIG_ARCH_CHIP_STM32F100CB is not set
+# CONFIG_ARCH_CHIP_STM32F100R8 is not set
+# CONFIG_ARCH_CHIP_STM32F100RB is not set
+# CONFIG_ARCH_CHIP_STM32F100RC is not set
+# CONFIG_ARCH_CHIP_STM32F100RD is not set
+# CONFIG_ARCH_CHIP_STM32F100RE is not set
+# CONFIG_ARCH_CHIP_STM32F100V8 is not set
+# CONFIG_ARCH_CHIP_STM32F100VB is not set
+# CONFIG_ARCH_CHIP_STM32F100VC is not set
+# CONFIG_ARCH_CHIP_STM32F100VD is not set
+# CONFIG_ARCH_CHIP_STM32F100VE is not set
+# CONFIG_ARCH_CHIP_STM32F103T8 is not set
+# CONFIG_ARCH_CHIP_STM32F103TB is not set
+# CONFIG_ARCH_CHIP_STM32F103C4 is not set
+# CONFIG_ARCH_CHIP_STM32F103C8 is not set
+# CONFIG_ARCH_CHIP_STM32F103CB is not set
+# CONFIG_ARCH_CHIP_STM32F103R8 is not set
+# CONFIG_ARCH_CHIP_STM32F103RB is not set
+# CONFIG_ARCH_CHIP_STM32F103RC is not set
+# CONFIG_ARCH_CHIP_STM32F103RD is not set
+# CONFIG_ARCH_CHIP_STM32F103RE is not set
+# CONFIG_ARCH_CHIP_STM32F103V8 is not set
+# CONFIG_ARCH_CHIP_STM32F103VB is not set
+# CONFIG_ARCH_CHIP_STM32F103VC is not set
+# CONFIG_ARCH_CHIP_STM32F103VE is not set
+# CONFIG_ARCH_CHIP_STM32F103ZE is not set
+# CONFIG_ARCH_CHIP_STM32F105VB is not set
+# CONFIG_ARCH_CHIP_STM32F107VC is not set
+# CONFIG_ARCH_CHIP_STM32F207IG is not set
+# CONFIG_ARCH_CHIP_STM32F207ZE is not set
+# CONFIG_ARCH_CHIP_STM32F302CB is not set
+# CONFIG_ARCH_CHIP_STM32F302CC is not set
+# CONFIG_ARCH_CHIP_STM32F302RB is not set
+# CONFIG_ARCH_CHIP_STM32F302RC is not set
+# CONFIG_ARCH_CHIP_STM32F302VB is not set
+# CONFIG_ARCH_CHIP_STM32F302VC is not set
+# CONFIG_ARCH_CHIP_STM32F303CB is not set
+# CONFIG_ARCH_CHIP_STM32F303CC is not set
+# CONFIG_ARCH_CHIP_STM32F303RB is not set
+# CONFIG_ARCH_CHIP_STM32F303RC is not set
+# CONFIG_ARCH_CHIP_STM32F303VB is not set
+# CONFIG_ARCH_CHIP_STM32F303VC is not set
+# CONFIG_ARCH_CHIP_STM32F401RE is not set
+# CONFIG_ARCH_CHIP_STM32F411RE is not set
+# CONFIG_ARCH_CHIP_STM32F405RG is not set
+# CONFIG_ARCH_CHIP_STM32F405VG is not set
+# CONFIG_ARCH_CHIP_STM32F405ZG is not set
+# CONFIG_ARCH_CHIP_STM32F407VE is not set
+CONFIG_ARCH_CHIP_STM32F407VG=y
+# CONFIG_ARCH_CHIP_STM32F407ZE is not set
+# CONFIG_ARCH_CHIP_STM32F407ZG is not set
+# CONFIG_ARCH_CHIP_STM32F407IE is not set
+# CONFIG_ARCH_CHIP_STM32F407IG is not set
+# CONFIG_ARCH_CHIP_STM32F427V is not set
+# CONFIG_ARCH_CHIP_STM32F427Z is not set
+# CONFIG_ARCH_CHIP_STM32F427I is not set
+# CONFIG_ARCH_CHIP_STM32F429V is not set
+# CONFIG_ARCH_CHIP_STM32F429Z is not set
+# CONFIG_ARCH_CHIP_STM32F429I is not set
+# CONFIG_ARCH_CHIP_STM32F429B is not set
+# CONFIG_ARCH_CHIP_STM32F429N is not set
+# CONFIG_STM32_STM32L15XX is not set
+# CONFIG_STM32_ENERGYLITE is not set
+# CONFIG_STM32_STM32F10XX is not set
+# CONFIG_STM32_VALUELINE is not set
+# CONFIG_STM32_CONNECTIVITYLINE is not set
+# CONFIG_STM32_PERFORMANCELINE is not set
+# CONFIG_STM32_HIGHDENSITY is not set
+# CONFIG_STM32_MEDIUMDENSITY is not set
+# CONFIG_STM32_LOWDENSITY is not set
+# CONFIG_STM32_STM32F20XX is not set
+# CONFIG_STM32_STM32F207 is not set
+# CONFIG_STM32_STM32F30XX is not set
+CONFIG_STM32_STM32F40XX=y
+# CONFIG_STM32_STM32F401 is not set
+# CONFIG_STM32_STM32F411 is not set
+# CONFIG_STM32_STM32F405 is not set
+CONFIG_STM32_STM32F407=y
+# CONFIG_STM32_STM32F427 is not set
+# CONFIG_STM32_STM32F429 is not set
+# CONFIG_STM32_DFU is not set
+
+#
+# STM32 Peripheral Support
+#
+CONFIG_STM32_HAVE_CCM=y
+# CONFIG_STM32_HAVE_USBDEV is not set
+CONFIG_STM32_HAVE_OTGFS=y
+CONFIG_STM32_HAVE_FSMC=y
+CONFIG_STM32_HAVE_USART3=y
+CONFIG_STM32_HAVE_UART4=y
+CONFIG_STM32_HAVE_UART5=y
+CONFIG_STM32_HAVE_USART6=y
+# CONFIG_STM32_HAVE_UART7 is not set
+# CONFIG_STM32_HAVE_UART8 is not set
+CONFIG_STM32_HAVE_TIM1=y
+CONFIG_STM32_HAVE_TIM5=y
+CONFIG_STM32_HAVE_TIM6=y
+CONFIG_STM32_HAVE_TIM7=y
+CONFIG_STM32_HAVE_TIM8=y
+CONFIG_STM32_HAVE_TIM9=y
+CONFIG_STM32_HAVE_TIM10=y
+CONFIG_STM32_HAVE_TIM11=y
+CONFIG_STM32_HAVE_TIM12=y
+CONFIG_STM32_HAVE_TIM13=y
+CONFIG_STM32_HAVE_TIM14=y
+# CONFIG_STM32_HAVE_TIM15 is not set
+# CONFIG_STM32_HAVE_TIM16 is not set
+# CONFIG_STM32_HAVE_TIM17 is not set
+CONFIG_STM32_HAVE_ADC2=y
+CONFIG_STM32_HAVE_ADC3=y
+# CONFIG_STM32_HAVE_ADC4 is not set
+CONFIG_STM32_HAVE_CAN1=y
+CONFIG_STM32_HAVE_CAN2=y
+CONFIG_STM32_HAVE_RNG=y
+CONFIG_STM32_HAVE_ETHMAC=y
+CONFIG_STM32_HAVE_SPI2=y
+CONFIG_STM32_HAVE_SPI3=y
+# CONFIG_STM32_HAVE_SPI4 is not set
+# CONFIG_STM32_HAVE_SPI5 is not set
+# CONFIG_STM32_ADC1 is not set
+# CONFIG_STM32_ADC2 is not set
+# CONFIG_STM32_ADC3 is not set
+# CONFIG_STM32_BKPSRAM is not set
+# CONFIG_STM32_CAN1 is not set
+# CONFIG_STM32_CAN2 is not set
+# CONFIG_STM32_CCMDATARAM is not set
+# CONFIG_STM32_CRC is not set
+# CONFIG_STM32_CRYP is not set
+# CONFIG_STM32_DMA1 is not set
+# CONFIG_STM32_DMA2 is not set
+# CONFIG_STM32_DAC1 is not set
+# CONFIG_STM32_DAC2 is not set
+# CONFIG_STM32_DCMI is not set
+# CONFIG_STM32_ETHMAC is not set
+# CONFIG_STM32_FSMC is not set
+# CONFIG_STM32_HASH is not set
+# CONFIG_STM32_I2C1 is not set
+# CONFIG_STM32_I2C2 is not set
+# CONFIG_STM32_I2C3 is not set
+CONFIG_STM32_OTGFS=y
+# CONFIG_STM32_OTGHS is not set
+CONFIG_STM32_PWR=y
+# CONFIG_STM32_RNG is not set
+# CONFIG_STM32_SDIO is not set
+CONFIG_STM32_SPI1=y
+# CONFIG_STM32_SPI2 is not set
+# CONFIG_STM32_SPI3 is not set
+CONFIG_STM32_SYSCFG=y
+# CONFIG_STM32_TIM1 is not set
+# CONFIG_STM32_TIM2 is not set
+# CONFIG_STM32_TIM3 is not set
+# CONFIG_STM32_TIM4 is not set
+# CONFIG_STM32_TIM5 is not set
+# CONFIG_STM32_TIM6 is not set
+# CONFIG_STM32_TIM7 is not set
+# CONFIG_STM32_TIM8 is not set
+# CONFIG_STM32_TIM9 is not set
+# CONFIG_STM32_TIM10 is not set
+# CONFIG_STM32_TIM11 is not set
+# CONFIG_STM32_TIM12 is not set
+# CONFIG_STM32_TIM13 is not set
+# CONFIG_STM32_TIM14 is not set
+# CONFIG_STM32_USART1 is not set
+CONFIG_STM32_USART2=y
+# CONFIG_STM32_USART3 is not set
+# CONFIG_STM32_UART4 is not set
+# CONFIG_STM32_UART5 is not set
+# CONFIG_STM32_USART6 is not set
+# CONFIG_STM32_IWDG is not set
+# CONFIG_STM32_WWDG is not set
+CONFIG_STM32_SPI=y
+
+#
+# Alternate Pin Mapping
+#
+# CONFIG_STM32_FLASH_PREFETCH is not set
+# CONFIG_STM32_JTAG_DISABLE is not set
+# CONFIG_STM32_JTAG_FULL_ENABLE is not set
+# CONFIG_STM32_JTAG_NOJNTRST_ENABLE is not set
+CONFIG_STM32_JTAG_SW_ENABLE=y
+# CONFIG_STM32_DISABLE_IDLE_SLEEP_DURING_DEBUG is not set
+# CONFIG_STM32_FORCEPOWER is not set
+# CONFIG_ARCH_BOARD_STM32_CUSTOM_CLOCKCONFIG is not set
+# CONFIG_STM32_CCMEXCLUDE is not set
+CONFIG_STM32_USART=y
+
+#
+# U[S]ART Configuration
+#
+# CONFIG_USART2_RS485 is not set
+# CONFIG_SERIAL_DISABLE_REORDERING is not set
+# CONFIG_STM32_USART_SINGLEWIRE is not set
+
+#
+# SPI Configuration
+#
+# CONFIG_STM32_SPI_INTERRUPTS is not set
+# CONFIG_STM32_SPI_DMA is not set
+
+#
+# USB FS Host Configuration
+#
+
+#
+# USB HS Host Configuration
+#
+
+#
+# USB Host Debug Configuration
+#
+
+#
+# USB Device Configuration
+#
+
+#
+# Architecture Options
+#
+# CONFIG_ARCH_NOINTC is not set
+# CONFIG_ARCH_VECNOTIRQ is not set
+# CONFIG_ARCH_DMA is not set
+CONFIG_ARCH_HAVE_IRQPRIO=y
+# CONFIG_ARCH_L2CACHE is not set
+# CONFIG_ARCH_HAVE_COHERENT_DCACHE is not set
+# CONFIG_ARCH_HAVE_ADDRENV is not set
+# CONFIG_ARCH_NEED_ADDRENV_MAPPING is not set
+CONFIG_ARCH_HAVE_VFORK=y
+# CONFIG_ARCH_HAVE_MMU is not set
+CONFIG_ARCH_HAVE_MPU=y
+# CONFIG_ARCH_NAND_HWECC is not set
+# CONFIG_ARCH_HAVE_EXTCLK is not set
+# CONFIG_ARCH_USE_MPU is not set
+# CONFIG_ARCH_IRQPRIO is not set
+CONFIG_ARCH_STACKDUMP=y
+# CONFIG_ENDIAN_BIG is not set
+# CONFIG_ARCH_IDLE_CUSTOM is not set
+# CONFIG_ARCH_HAVE_RAMFUNCS is not set
+CONFIG_ARCH_HAVE_RAMVECTORS=y
+# CONFIG_ARCH_RAMVECTORS is not set
+
+#
+# Board Settings
+#
+CONFIG_BOARD_LOOPSPERMSEC=16717
+# CONFIG_ARCH_CALIBRATION is not set
+
+#
+# Interrupt options
+#
+CONFIG_ARCH_HAVE_INTERRUPTSTACK=y
+CONFIG_ARCH_INTERRUPTSTACK=0
+CONFIG_ARCH_HAVE_HIPRI_INTERRUPT=y
+# CONFIG_ARCH_HIPRI_INTERRUPT is not set
+
+#
+# Boot options
+#
+# CONFIG_BOOT_RUNFROMEXTSRAM is not set
+CONFIG_BOOT_RUNFROMFLASH=y
+# CONFIG_BOOT_RUNFROMISRAM is not set
+# CONFIG_BOOT_RUNFROMSDRAM is not set
+# CONFIG_BOOT_COPYTORAM is not set
+
+#
+# Boot Memory Configuration
+#
+CONFIG_RAM_START=0x20000000
+CONFIG_RAM_SIZE=114688
+# CONFIG_ARCH_HAVE_SDRAM is not set
+
+#
+# Board Selection
+#
+CONFIG_ARCH_BOARD_STM32F4_DISCOVERY=y
+# CONFIG_ARCH_BOARD_MIKROE_STM32F4 is not set
+# CONFIG_ARCH_BOARD_CUSTOM is not set
+CONFIG_ARCH_BOARD="stm32f4discovery"
+
+#
+# Common Board Options
+#
+CONFIG_ARCH_HAVE_LEDS=y
+CONFIG_ARCH_LEDS=y
+CONFIG_ARCH_HAVE_BUTTONS=y
+CONFIG_ARCH_BUTTONS=y
+CONFIG_ARCH_HAVE_IRQBUTTONS=y
+# CONFIG_ARCH_IRQBUTTONS is not set
+CONFIG_NSH_MMCSDMINOR=0
+
+#
+# Board-Specific Options
+#
+# CONFIG_STM32F4DISBB is not set
+
+#
+# RTOS Features
+#
+CONFIG_DISABLE_OS_API=y
+# CONFIG_DISABLE_POSIX_TIMERS is not set
+# CONFIG_DISABLE_PTHREAD is not set
+# CONFIG_DISABLE_SIGNALS is not set
+# CONFIG_DISABLE_MQUEUE is not set
+# CONFIG_DISABLE_ENVIRON is not set
+
+#
+# Clocks and Timers
+#
+CONFIG_USEC_PER_TICK=10000
+# CONFIG_SYSTEM_TIME64 is not set
+# CONFIG_CLOCK_MONOTONIC is not set
+# CONFIG_JULIAN_TIME is not set
+CONFIG_START_YEAR=2011
+CONFIG_START_MONTH=12
+CONFIG_START_DAY=6
+CONFIG_MAX_WDOGPARMS=2
+CONFIG_PREALLOC_WDOGS=16
+CONFIG_WDOG_INTRESERVE=4
+CONFIG_PREALLOC_TIMERS=4
+
+#
+# Tasks and Scheduling
+#
+# CONFIG_INIT_NONE is not set
+CONFIG_INIT_ENTRYPOINT=y
+# CONFIG_INIT_FILEPATH is not set
+CONFIG_USER_ENTRYPOINT="nsh_main"
+CONFIG_RR_INTERVAL=200
+CONFIG_TASK_NAME_SIZE=0
+CONFIG_MAX_TASK_ARGS=4
+CONFIG_MAX_TASKS=16
+# CONFIG_SCHED_HAVE_PARENT is not set
+CONFIG_SCHED_WAITPID=y
+
+#
+# Pthread Options
+#
+# CONFIG_MUTEX_TYPES is not set
+CONFIG_NPTHREAD_KEYS=4
+
+#
+# Performance Monitoring
+#
+# CONFIG_SCHED_CPULOAD is not set
+# CONFIG_SCHED_INSTRUMENTATION is not set
+
+#
+# Files and I/O
+#
+CONFIG_DEV_CONSOLE=y
+# CONFIG_FDCLONE_DISABLE is not set
+# CONFIG_FDCLONE_STDIO is not set
+CONFIG_SDCLONE_DISABLE=y
+CONFIG_NFILE_DESCRIPTORS=8
+CONFIG_NFILE_STREAMS=8
+CONFIG_NAME_MAX=32
+# CONFIG_PRIORITY_INHERITANCE is not set
+
+#
+# RTOS hooks
+#
+# CONFIG_BOARD_INITIALIZE is not set
+# CONFIG_SCHED_STARTHOOK is not set
+# CONFIG_SCHED_ATEXIT is not set
+# CONFIG_SCHED_ONEXIT is not set
+
+#
+# Signal Numbers
+#
+CONFIG_SIG_SIGUSR1=1
+CONFIG_SIG_SIGUSR2=2
+CONFIG_SIG_SIGALARM=3
+CONFIG_SIG_SIGCONDTIMEDOUT=16
+
+#
+# POSIX Message Queue Options
+#
+CONFIG_PREALLOC_MQ_MSGS=4
+CONFIG_MQ_MAXMSGSIZE=32
+
+#
+# Work Queue Support
+#
+# CONFIG_SCHED_WORKQUEUE is not set
+# CONFIG_SCHED_HPWORK is not set
+# CONFIG_SCHED_LPWORK is not set
+
+#
+# Stack and heap information
+#
+CONFIG_IDLETHREAD_STACKSIZE=1024
+CONFIG_USERMAIN_STACKSIZE=2048
+CONFIG_PTHREAD_STACK_MIN=256
+CONFIG_PTHREAD_STACK_DEFAULT=2048
+# CONFIG_LIB_SYSCALL is not set
+
+#
+# Device Drivers
+#
+CONFIG_DISABLE_POLL=y
+CONFIG_DEV_NULL=y
+# CONFIG_DEV_ZERO is not set
+# CONFIG_LOOP is not set
+
+#
+# Buffering
+#
+# CONFIG_DRVR_WRITEBUFFER is not set
+# CONFIG_DRVR_READAHEAD is not set
+# CONFIG_RAMDISK is not set
+# CONFIG_CAN is not set
+# CONFIG_ARCH_HAVE_PWM_PULSECOUNT is not set
+# CONFIG_PWM is not set
+CONFIG_ARCH_HAVE_I2CRESET=y
+# CONFIG_I2C is not set
+CONFIG_SPI=y
+# CONFIG_SPI_OWNBUS is not set
+CONFIG_SPI_EXCHANGE=y
+# CONFIG_SPI_CMDDATA is not set
+# CONFIG_SPI_BITBANG is not set
+# CONFIG_I2S is not set
+# CONFIG_RTC is not set
+# CONFIG_WATCHDOG is not set
+# CONFIG_TIMER is not set
+# CONFIG_ANALOG is not set
+# CONFIG_AUDIO_DEVICES is not set
+# CONFIG_VIDEO_DEVICES is not set
+# CONFIG_BCH is not set
+# CONFIG_INPUT is not set
+# CONFIG_LCD is not set
+# CONFIG_MMCSD is not set
+# CONFIG_MTD is not set
+# CONFIG_PIPES is not set
+# CONFIG_PM is not set
+# CONFIG_POWER is not set
+# CONFIG_SENSORS is not set
+# CONFIG_SERCOMM_CONSOLE is not set
+CONFIG_SERIAL=y
+# CONFIG_DEV_LOWCONSOLE is not set
+# CONFIG_16550_UART is not set
+# CONFIG_ARCH_HAVE_UART is not set
+# CONFIG_ARCH_HAVE_UART0 is not set
+# CONFIG_ARCH_HAVE_UART1 is not set
+# CONFIG_ARCH_HAVE_UART2 is not set
+# CONFIG_ARCH_HAVE_UART3 is not set
+# CONFIG_ARCH_HAVE_UART4 is not set
+# CONFIG_ARCH_HAVE_UART5 is not set
+# CONFIG_ARCH_HAVE_UART6 is not set
+# CONFIG_ARCH_HAVE_UART7 is not set
+# CONFIG_ARCH_HAVE_UART8 is not set
+# CONFIG_ARCH_HAVE_SCI0 is not set
+# CONFIG_ARCH_HAVE_SCI1 is not set
+# CONFIG_ARCH_HAVE_USART0 is not set
+# CONFIG_ARCH_HAVE_USART1 is not set
+CONFIG_ARCH_HAVE_USART2=y
+# CONFIG_ARCH_HAVE_USART3 is not set
+# CONFIG_ARCH_HAVE_USART4 is not set
+# CONFIG_ARCH_HAVE_USART5 is not set
+# CONFIG_ARCH_HAVE_USART6 is not set
+# CONFIG_ARCH_HAVE_USART7 is not set
+# CONFIG_ARCH_HAVE_USART8 is not set
+# CONFIG_ARCH_HAVE_OTHER_UART is not set
+
+#
+# USART Configuration
+#
+CONFIG_USART2_ISUART=y
+CONFIG_MCU_SERIAL=y
+CONFIG_STANDARD_SERIAL=y
+CONFIG_ARCH_HAVE_SERIAL_TERMIOS=y
+# CONFIG_SERIAL_TERMIOS is not set
+CONFIG_USART2_SERIAL_CONSOLE=y
+# CONFIG_OTHER_SERIAL_CONSOLE is not set
+# CONFIG_NO_SERIAL_CONSOLE is not set
+
+#
+# USART2 Configuration
+#
+CONFIG_USART2_RXBUFSIZE=128
+CONFIG_USART2_TXBUFSIZE=128
+CONFIG_USART2_BAUD=115200
+CONFIG_USART2_BITS=8
+CONFIG_USART2_PARITY=0
+CONFIG_USART2_2STOP=0
+# CONFIG_USART2_IFLOWCONTROL is not set
+# CONFIG_USART2_OFLOWCONTROL is not set
+# CONFIG_SERIAL_IFLOWCONTROL is not set
+# CONFIG_SERIAL_OFLOWCONTROL is not set
+# CONFIG_USBDEV is not set
+# CONFIG_USBHOST is not set
+# CONFIG_WIRELESS is not set
+
+#
+# System Logging Device Options
+#
+
+#
+# System Logging
+#
+# CONFIG_RAMLOG is not set
+
+#
+# Networking Support
+#
+# CONFIG_ARCH_HAVE_NET is not set
+# CONFIG_ARCH_HAVE_PHY is not set
+# CONFIG_NET is not set
+
+#
+# Crypto API
+#
+# CONFIG_CRYPTO is not set
+
+#
+# File Systems
+#
+
+#
+# File system configuration
+#
+# CONFIG_DISABLE_MOUNTPOINT is not set
+# CONFIG_FS_AUTOMOUNTER is not set
+# CONFIG_DISABLE_PSEUDOFS_OPERATIONS is not set
+# CONFIG_FS_READABLE is not set
+# CONFIG_FS_WRITABLE is not set
+# CONFIG_FS_NAMED_SEMAPHORES is not set
+CONFIG_FS_MQUEUE_MPATH="/var/mqueue"
+# CONFIG_FS_RAMMAP is not set
+# CONFIG_FS_FAT is not set
+# CONFIG_FS_NXFFS is not set
+# CONFIG_FS_ROMFS is not set
+# CONFIG_FS_SMARTFS is not set
+# CONFIG_FS_BINFS is not set
+# CONFIG_FS_PROCFS is not set
+
+#
+# System Logging
+#
+# CONFIG_SYSLOG is not set
+
+#
+# Graphics Support
+#
+# CONFIG_NX is not set
+
+#
+# Memory Management
+#
+# CONFIG_MM_SMALL is not set
+CONFIG_MM_REGIONS=2
+# CONFIG_ARCH_HAVE_HEAP2 is not set
+# CONFIG_GRAN is not set
+
+#
+# Audio Support
+#
+# CONFIG_AUDIO is not set
+
+#
+# Binary Loader
+#
+# CONFIG_BINFMT_DISABLE is not set
+# CONFIG_BINFMT_EXEPATH is not set
+# CONFIG_NXFLAT is not set
+# CONFIG_ELF is not set
+CONFIG_BUILTIN=y
+# CONFIG_PIC is not set
+# CONFIG_SYMTAB_ORDEREDBYNAME is not set
+
+#
+# Library Routines
+#
+
+#
+# Standard C Library Options
+#
+CONFIG_STDIO_BUFFER_SIZE=64
+CONFIG_STDIO_LINEBUFFER=y
+CONFIG_NUNGET_CHARS=2
+CONFIG_LIB_HOMEDIR="/"
+# CONFIG_LIBM is not set
+# CONFIG_NOPRINTF_FIELDWIDTH is not set
+# CONFIG_LIBC_FLOATINGPOINT is not set
+CONFIG_LIB_RAND_ORDER=1
+# CONFIG_EOL_IS_CR is not set
+# CONFIG_EOL_IS_LF is not set
+# CONFIG_EOL_IS_BOTH_CRLF is not set
+CONFIG_EOL_IS_EITHER_CRLF=y
+# CONFIG_LIBC_EXECFUNCS is not set
+CONFIG_POSIX_SPAWN_PROXY_STACKSIZE=1024
+CONFIG_TASK_SPAWN_DEFAULT_STACKSIZE=2048
+# CONFIG_LIBC_STRERROR is not set
+# CONFIG_LIBC_PERROR_STDOUT is not set
+CONFIG_ARCH_LOWPUTC=y
+# CONFIG_LIBC_LOCALTIME is not set
+CONFIG_LIB_SENDFILE_BUFSIZE=512
+# CONFIG_ARCH_ROMGETC is not set
+# CONFIG_ARCH_OPTIMIZED_FUNCTIONS is not set
+
+#
+# Non-standard Library Support
+#
+# CONFIG_LIB_KBDCODEC is not set
+# CONFIG_LIB_SLCDCODEC is not set
+
+#
+# Basic CXX Support
+#
+# CONFIG_C99_BOOL8 is not set
+CONFIG_HAVE_CXX=y
+CONFIG_HAVE_CXXINITIALIZE=y
+# CONFIG_CXX_NEWLONG is not set
+
+#
+# uClibc++ Standard C++ Library
+#
+# CONFIG_UCLIBCXX is not set
+
+#
+# Application Configuration
+#
+
+#
+# Built-In Applications
+#
+CONFIG_BUILTIN_PROXY_STACKSIZE=1024
+
+#
+# Examples
+#
+# CONFIG_EXAMPLES_BUTTONS is not set
+# CONFIG_EXAMPLES_CAN is not set
+# CONFIG_EXAMPLES_CONFIGDATA is not set
+# CONFIG_EXAMPLES_CPUHOG is not set
+# CONFIG_EXAMPLES_CXXTEST is not set
+# CONFIG_EXAMPLES_DHCPD is not set
+# CONFIG_EXAMPLES_ELF is not set
+# CONFIG_EXAMPLES_FTPC is not set
+# CONFIG_EXAMPLES_FTPD is not set
+# CONFIG_EXAMPLES_HELLO is not set
+# CONFIG_EXAMPLES_HELLOXX is not set
+# CONFIG_EXAMPLES_JSON is not set
+# CONFIG_EXAMPLES_HIDKBD is not set
+# CONFIG_EXAMPLES_KEYPADTEST is not set
+# CONFIG_EXAMPLES_IGMP is not set
+# CONFIG_EXAMPLES_MM is not set
+# CONFIG_EXAMPLES_MODBUS is not set
+# CONFIG_EXAMPLES_MOUNT is not set
+# CONFIG_EXAMPLES_NRF24L01TERM is not set
+CONFIG_EXAMPLES_NSH=y
+CONFIG_EXAMPLES_NSH_CXXINITIALIZE=y
+# CONFIG_EXAMPLES_NULL is not set
+# CONFIG_EXAMPLES_NX is not set
+# CONFIG_EXAMPLES_NXTERM is not set
+# CONFIG_EXAMPLES_NXFFS is not set
+# CONFIG_EXAMPLES_NXFLAT is not set
+# CONFIG_EXAMPLES_NXHELLO is not set
+# CONFIG_EXAMPLES_NXIMAGE is not set
+# CONFIG_EXAMPLES_NXLINES is not set
+# CONFIG_EXAMPLES_NXTEXT is not set
+# CONFIG_EXAMPLES_OSTEST is not set
+# CONFIG_EXAMPLES_PIPE is not set
+# CONFIG_EXAMPLES_POSIXSPAWN is not set
+# CONFIG_EXAMPLES_QENCODER is not set
+# CONFIG_EXAMPLES_RGMP is not set
+# CONFIG_EXAMPLES_ROMFS is not set
+# CONFIG_EXAMPLES_SENDMAIL is not set
+# CONFIG_EXAMPLES_SERIALBLASTER is not set
+# CONFIG_EXAMPLES_SERIALRX is not set
+# CONFIG_EXAMPLES_SERLOOP is not set
+# CONFIG_EXAMPLES_SLCD is not set
+# CONFIG_EXAMPLES_SMART_TEST is not set
+# CONFIG_EXAMPLES_SMART is not set
+# CONFIG_EXAMPLES_TCPECHO is not set
+# CONFIG_EXAMPLES_TELNETD is not set
+# CONFIG_EXAMPLES_THTTPD is not set
+# CONFIG_EXAMPLES_TIFF is not set
+# CONFIG_EXAMPLES_TOUCHSCREEN is not set
+# CONFIG_EXAMPLES_UDP is not set
+# CONFIG_EXAMPLES_WEBSERVER is not set
+# CONFIG_EXAMPLES_USBSERIAL is not set
+# CONFIG_EXAMPLES_USBTERM is not set
+# CONFIG_EXAMPLES_WATCHDOG is not set
+
+#
+# Graphics Support
+#
+# CONFIG_TIFF is not set
+
+#
+# Interpreters
+#
+# CONFIG_INTERPRETERS_FICL is not set
+# CONFIG_INTERPRETERS_PCODE is not set
+
+#
+# Network Utilities
+#
+
+#
+# Networking Utilities
+#
+# CONFIG_NETUTILS_CODECS is not set
+# CONFIG_NETUTILS_DHCPD is not set
+# CONFIG_NETUTILS_FTPC is not set
+# CONFIG_NETUTILS_FTPD is not set
+# CONFIG_NETUTILS_JSON is not set
+# CONFIG_NETUTILS_SMTP is not set
+# CONFIG_NETUTILS_TFTPC is not set
+# CONFIG_NETUTILS_THTTPD is not set
+# CONFIG_NETUTILS_NETLIB is not set
+# CONFIG_NETUTILS_WEBCLIENT is not set
+
+#
+# FreeModBus
+#
+# CONFIG_MODBUS is not set
+
+#
+# NSH Library
+#
+CONFIG_NSH_LIBRARY=y
+
+#
+# Command Line Configuration
+#
+CONFIG_NSH_READLINE=y
+# CONFIG_NSH_CLE is not set
+CONFIG_NSH_LINELEN=64
+# CONFIG_NSH_DISABLE_SEMICOLON is not set
+# CONFIG_NSH_CMDPARMS is not set
+CONFIG_NSH_MAXARGUMENTS=6
+# CONFIG_NSH_ARGCAT is not set
+CONFIG_NSH_NESTDEPTH=3
+# CONFIG_NSH_DISABLEBG is not set
+CONFIG_NSH_BUILTIN_APPS=y
+
+#
+# Disable Individual commands
+#
+# CONFIG_NSH_DISABLE_ADDROUTE is not set
+# CONFIG_NSH_DISABLE_CAT is not set
+# CONFIG_NSH_DISABLE_CD is not set
+# CONFIG_NSH_DISABLE_CP is not set
+# CONFIG_NSH_DISABLE_CMP is not set
+# CONFIG_NSH_DISABLE_DD is not set
+# CONFIG_NSH_DISABLE_DF is not set
+# CONFIG_NSH_DISABLE_DELROUTE is not set
+# CONFIG_NSH_DISABLE_ECHO is not set
+# CONFIG_NSH_DISABLE_EXEC is not set
+# CONFIG_NSH_DISABLE_EXIT is not set
+# CONFIG_NSH_DISABLE_FREE is not set
+# CONFIG_NSH_DISABLE_GET is not set
+# CONFIG_NSH_DISABLE_HELP is not set
+# CONFIG_NSH_DISABLE_HEXDUMP is not set
+# CONFIG_NSH_DISABLE_IFCONFIG is not set
+# CONFIG_NSH_DISABLE_KILL is not set
+# CONFIG_NSH_DISABLE_LOSETUP is not set
+# CONFIG_NSH_DISABLE_LS is not set
+# CONFIG_NSH_DISABLE_MB is not set
+# CONFIG_NSH_DISABLE_MKDIR is not set
+# CONFIG_NSH_DISABLE_MKFIFO is not set
+# CONFIG_NSH_DISABLE_MKRD is not set
+# CONFIG_NSH_DISABLE_MH is not set
+# CONFIG_NSH_DISABLE_MOUNT is not set
+# CONFIG_NSH_DISABLE_MW is not set
+# CONFIG_NSH_DISABLE_PS is not set
+# CONFIG_NSH_DISABLE_PUT is not set
+# CONFIG_NSH_DISABLE_PWD is not set
+# CONFIG_NSH_DISABLE_RM is not set
+# CONFIG_NSH_DISABLE_RMDIR is not set
+# CONFIG_NSH_DISABLE_SET is not set
+# CONFIG_NSH_DISABLE_SH is not set
+# CONFIG_NSH_DISABLE_SLEEP is not set
+# CONFIG_NSH_DISABLE_TEST is not set
+# CONFIG_NSH_DISABLE_UMOUNT is not set
+# CONFIG_NSH_DISABLE_UNSET is not set
+# CONFIG_NSH_DISABLE_USLEEP is not set
+# CONFIG_NSH_DISABLE_WGET is not set
+# CONFIG_NSH_DISABLE_XD is not set
+
+#
+# Configure Command Options
+#
+# CONFIG_NSH_CMDOPT_DF_H is not set
+CONFIG_NSH_CODECS_BUFSIZE=128
+# CONFIG_NSH_CMDOPT_HEXDUMP is not set
+CONFIG_NSH_FILEIOSIZE=512
+
+#
+# Scripting Support
+#
+# CONFIG_NSH_DISABLESCRIPT is not set
+# CONFIG_NSH_DISABLE_ITEF is not set
+# CONFIG_NSH_DISABLE_LOOPS is not set
+
+#
+# Console Configuration
+#
+CONFIG_NSH_CONSOLE=y
+# CONFIG_NSH_ALTCONDEV is not set
+# CONFIG_NSH_ARCHINIT is not set
+
+#
+# NxWidgets/NxWM
+#
+
+#
+# Platform-specific Support
+#
+# CONFIG_PLATFORM_CONFIGDATA is not set
+
+#
+# System Libraries and NSH Add-Ons
+#
+
+#
+# Custom Free Memory Command
+#
+# CONFIG_SYSTEM_FREE is not set
+
+#
+# EMACS-like Command Line Editor
+#
+# CONFIG_SYSTEM_CLE is not set
+
+#
+# FLASH Program Installation
+#
+# CONFIG_SYSTEM_INSTALL is not set
+
+#
+# FLASH Erase-all Command
+#
+
+#
+# Intel HEX to binary conversion
+#
+# CONFIG_SYSTEM_HEX2BIN is not set
+
+#
+# I2C tool
+#
+
+#
+# INI File Parser
+#
+# CONFIG_SYSTEM_INIFILE is not set
+
+#
+# NxPlayer media player library / command Line
+#
+# CONFIG_SYSTEM_NXPLAYER is not set
+
+#
+# RAM test
+#
+# CONFIG_SYSTEM_RAMTEST is not set
+
+#
+# readline()
+#
+CONFIG_SYSTEM_READLINE=y
+CONFIG_READLINE_ECHO=y
+
+#
+# P-Code Support
+#
+
+#
+# PHY Tool
+#
+
+#
+# Power Off
+#
+# CONFIG_SYSTEM_POWEROFF is not set
+
+#
+# RAMTRON
+#
+# CONFIG_SYSTEM_RAMTRON is not set
+
+#
+# SD Card
+#
+# CONFIG_SYSTEM_SDCARD is not set
+
+#
+# Sudoku
+#
+# CONFIG_SYSTEM_SUDOKU is not set
+
+#
+# Sysinfo
+#
+# CONFIG_SYSTEM_SYSINFO is not set
+
+#
+# VI Work-Alike Editor
+#
+# CONFIG_SYSTEM_VI is not set
+
+#
+# Stack Monitor
+#
+
+#
+# USB CDC/ACM Device Commands
+#
+
+#
+# USB Composite Device Commands
+#
+
+#
+# USB Mass Storage Device Commands
+#
+
+#
+# USB Monitor
+#
+
+#
+# Zmodem Commands
+#
+# CONFIG_SYSTEM_ZMODEM is not set
diff --git a/nuttx/configs/px4fmu-v2/nsh/setenv.sh b/nuttx/configs/px4fmu-v2/nsh/setenv.sh
new file mode 100755
index 000000000..4c3360716
--- /dev/null
+++ b/nuttx/configs/px4fmu-v2/nsh/setenv.sh
@@ -0,0 +1,76 @@
+#!/bin/bash
+# configs/stm32f4discovery/nsh/setenv.sh
+#
+#   Copyright (C) 2011-2012 Gregory Nutt. All rights reserved.
+#   Author: Gregory Nutt <gnutt@nuttx.org>
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions
+# are met:
+#
+# 1. Redistributions of source code must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+# 2. Redistributions in binary form must reproduce the above copyright
+#    notice, this list of conditions and the following disclaimer in
+#    the documentation and/or other materials provided with the
+#    distribution.
+# 3. Neither the name NuttX nor the names of its contributors may be
+#    used to endorse or promote products derived from this software
+#    without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+#
+
+if [ "$_" = "$0" ] ; then
+  echo "You must source this script, not run it!" 1>&2
+  exit 1
+fi
+
+WD=`pwd`
+if [ ! -x "setenv.sh" ]; then
+  echo "This script must be executed from the top-level NuttX build directory"
+  exit 1
+fi
+
+if [ -z "${PATH_ORIG}" ]; then
+  export PATH_ORIG="${PATH}"
+fi
+
+# This is the Cygwin path to the location where I installed the RIDE
+# toolchain under windows.  You will also have to edit this if you install
+# the RIDE toolchain in any other location
+#export TOOLCHAIN_BIN="/cygdrive/c/Program Files (x86)/Raisonance/Ride/arm-gcc/bin"
+
+# This is the Cygwin path to the location where I installed the CodeSourcery
+# toolchain under windows.  You will also have to edit this if you install
+# the CodeSourcery toolchain in any other location
+export TOOLCHAIN_BIN="/cygdrive/c/Program Files (x86)/CodeSourcery/Sourcery G++ Lite/bin"
+#export TOOLCHAIN_BIN="/cygdrive/c/Users/MyName/MentorGraphics/Sourcery_CodeBench_Lite_for_ARM_EABI/bin"
+
+# These are the Cygwin paths to the locations where I installed the Atollic
+# toolchain under windows.  You will also have to edit this if you install
+# the Atollic toolchain in any other location.  /usr/bin is added before
+# the Atollic bin path because there is are binaries named gcc.exe and g++.exe
+# at those locations as well.
+#export TOOLCHAIN_BIN="/usr/bin:/cygdrive/c/Program Files (x86)/Atollic/TrueSTUDIO for ARM Pro 2.3.0/ARMTools/bin"
+#export TOOLCHAIN_BIN="/usr/bin:/cygdrive/c/Program Files (x86)/Atollic/TrueSTUDIO for STMicroelectronics STM32 Lite 2.3.0/ARMTools/bin"
+
+# This is the Cygwin path to the location where I build the buildroot
+# toolchain.
+#export TOOLCHAIN_BIN="${WD}/../misc/buildroot/build_arm_nofpu/staging_dir/bin"
+
+# Add the path to the toolchain to the PATH varialble
+export PATH="${TOOLCHAIN_BIN}:/sbin:/usr/sbin:${PATH_ORIG}"
+
+echo "PATH : ${PATH}"
diff --git a/nuttx/configs/px4fmu-v2/nxlines/Make.defs b/nuttx/configs/px4fmu-v2/nxlines/Make.defs
new file mode 100644
index 000000000..3f58ea7b3
--- /dev/null
+++ b/nuttx/configs/px4fmu-v2/nxlines/Make.defs
@@ -0,0 +1,112 @@
+############################################################################
+# configs/stm32f4discovery/nxlines/Make.defs
+#
+#   Copyright (C) 2012 Gregory Nutt. All rights reserved.
+#   Author: Gregory Nutt <gnutt@nuttx.org>
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions
+# are met:
+#
+# 1. Redistributions of source code must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+# 2. Redistributions in binary form must reproduce the above copyright
+#    notice, this list of conditions and the following disclaimer in
+#    the documentation and/or other materials provided with the
+#    distribution.
+# 3. Neither the name NuttX nor the names of its contributors may be
+#    used to endorse or promote products derived from this software
+#    without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+#
+############################################################################
+
+include ${TOPDIR}/.config
+include ${TOPDIR}/tools/Config.mk
+include ${TOPDIR}/arch/arm/src/armv7-m/Toolchain.defs
+
+LDSCRIPT = ld.script
+
+ifeq ($(WINTOOL),y)
+  # Windows-native toolchains
+  DIRLINK = $(TOPDIR)/tools/copydir.sh
+  DIRUNLINK = $(TOPDIR)/tools/unlink.sh
+  MKDEP = $(TOPDIR)/tools/mknulldeps.sh
+  ARCHINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}"
+  ARCHXXINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}" -isystem "${shell cygpath -w $(TOPDIR)/include/cxx}"
+  ARCHSCRIPT = -T "${shell cygpath -w $(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/scripts/$(LDSCRIPT)}"
+else
+  # Linux/Cygwin-native toolchain
+  MKDEP = $(TOPDIR)/tools/mkdeps.sh
+  ARCHINCLUDES = -I. -isystem $(TOPDIR)/include
+  ARCHXXINCLUDES = -I. -isystem $(TOPDIR)/include -isystem $(TOPDIR)/include/cxx
+  ARCHSCRIPT = -T$(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/scripts/$(LDSCRIPT)
+endif
+
+CC = $(CROSSDEV)gcc
+CXX = $(CROSSDEV)g++
+CPP = $(CROSSDEV)gcc -E
+LD = $(CROSSDEV)ld
+AR = $(ARCROSSDEV)ar rcs
+NM = $(ARCROSSDEV)nm
+OBJCOPY = $(CROSSDEV)objcopy
+OBJDUMP = $(CROSSDEV)objdump
+
+ARCHCCVERSION = ${shell $(CC) -v 2>&1 | sed -n '/^gcc version/p' | sed -e 's/^gcc version \([0-9\.]\)/\1/g' -e 's/[-\ ].*//g' -e '1q'}
+ARCHCCMAJOR = ${shell echo $(ARCHCCVERSION) | cut -d'.' -f1}
+
+ifeq ($(CONFIG_DEBUG_SYMBOLS),y)
+  ARCHOPTIMIZATION = -g
+endif
+
+ifneq ($(CONFIG_DEBUG_NOOPT),y)
+  ARCHOPTIMIZATION += $(MAXOPTIMIZATION) -fno-strict-aliasing -fno-strength-reduce -fomit-frame-pointer
+endif
+
+ARCHCFLAGS = -fno-builtin
+ARCHCXXFLAGS = -fno-builtin -fno-exceptions -fno-rtti
+ARCHWARNINGS = -Wall -Wstrict-prototypes -Wshadow
+ARCHWARNINGSXX = -Wall -Wshadow
+ARCHDEFINES =
+ARCHPICFLAGS = -fpic -msingle-pic-base -mpic-register=r10
+
+CFLAGS = $(ARCHCFLAGS) $(ARCHWARNINGS) $(ARCHOPTIMIZATION) $(ARCHCPUFLAGS) $(ARCHINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES) -pipe
+CPICFLAGS = $(ARCHPICFLAGS) $(CFLAGS)
+CXXFLAGS = $(ARCHCXXFLAGS) $(ARCHWARNINGSXX) $(ARCHOPTIMIZATION) $(ARCHCPUFLAGS) $(ARCHXXINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES) -pipe
+CXXPICFLAGS = $(ARCHPICFLAGS) $(CXXFLAGS)
+CPPFLAGS = $(ARCHINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES)
+AFLAGS = $(CFLAGS) -D__ASSEMBLY__
+
+NXFLATLDFLAGS1 = -r -d -warn-common
+NXFLATLDFLAGS2 = $(NXFLATLDFLAGS1) -T$(TOPDIR)/binfmt/libnxflat/gnu-nxflat-pcrel.ld -no-check-sections
+LDNXFLATFLAGS = -e main -s 2048
+
+OBJEXT = .o
+LIBEXT = .a
+EXEEXT =
+
+ifneq ($(CROSSDEV),arm-nuttx-elf-)
+  LDFLAGS += -nostartfiles -nodefaultlibs
+endif
+ifeq ($(CONFIG_DEBUG_SYMBOLS),y)
+  LDFLAGS += -g
+endif
+
+
+HOSTCC = gcc
+HOSTINCLUDES = -I.
+HOSTCFLAGS = -Wall -Wstrict-prototypes -Wshadow -g -pipe
+HOSTLDFLAGS =
+
diff --git a/nuttx/configs/px4fmu-v2/nxlines/defconfig b/nuttx/configs/px4fmu-v2/nxlines/defconfig
new file mode 100644
index 000000000..d967dc7b5
--- /dev/null
+++ b/nuttx/configs/px4fmu-v2/nxlines/defconfig
@@ -0,0 +1,1038 @@
+#
+# Automatically generated file; DO NOT EDIT.
+# Nuttx/ Configuration
+#
+
+#
+# Build Setup
+#
+# CONFIG_EXPERIMENTAL is not set
+# CONFIG_DEFAULT_SMALL is not set
+# CONFIG_HOST_LINUX is not set
+# CONFIG_HOST_OSX is not set
+CONFIG_HOST_WINDOWS=y
+# CONFIG_HOST_OTHER is not set
+# CONFIG_WINDOWS_NATIVE is not set
+CONFIG_WINDOWS_CYGWIN=y
+# CONFIG_WINDOWS_MSYS is not set
+# CONFIG_WINDOWS_OTHER is not set
+
+#
+# Build Configuration
+#
+# CONFIG_APPS_DIR="../apps"
+# CONFIG_BUILD_2PASS is not set
+
+#
+# Binary Output Formats
+#
+# CONFIG_RRLOAD_BINARY is not set
+CONFIG_INTELHEX_BINARY=y
+# CONFIG_MOTOROLA_SREC is not set
+CONFIG_RAW_BINARY=y
+
+#
+# Customize Header Files
+#
+# CONFIG_ARCH_STDINT_H is not set
+# CONFIG_ARCH_STDBOOL_H is not set
+# CONFIG_ARCH_MATH_H is not set
+# CONFIG_ARCH_FLOAT_H is not set
+# CONFIG_ARCH_STDARG_H is not set
+
+#
+# Debug Options
+#
+# CONFIG_DEBUG is not set
+CONFIG_ARCH_HAVE_STACKCHECK=y
+CONFIG_ARCH_HAVE_HEAPCHECK=y
+# CONFIG_DEBUG_SYMBOLS is not set
+CONFIG_ARCH_HAVE_CUSTOMOPT=y
+# CONFIG_DEBUG_NOOPT is not set
+# CONFIG_DEBUG_CUSTOMOPT is not set
+CONFIG_DEBUG_FULLOPT=y
+
+#
+# System Type
+#
+CONFIG_ARCH_ARM=y
+# CONFIG_ARCH_AVR is not set
+# CONFIG_ARCH_HC is not set
+# CONFIG_ARCH_MIPS is not set
+# CONFIG_ARCH_RGMP is not set
+# CONFIG_ARCH_SH is not set
+# CONFIG_ARCH_SIM is not set
+# CONFIG_ARCH_X86 is not set
+# CONFIG_ARCH_Z16 is not set
+# CONFIG_ARCH_Z80 is not set
+CONFIG_ARCH="arm"
+
+#
+# ARM Options
+#
+# CONFIG_ARCH_CHIP_A1X is not set
+# CONFIG_ARCH_CHIP_C5471 is not set
+# CONFIG_ARCH_CHIP_CALYPSO is not set
+# CONFIG_ARCH_CHIP_DM320 is not set
+# CONFIG_ARCH_CHIP_IMX is not set
+# CONFIG_ARCH_CHIP_KINETIS is not set
+# CONFIG_ARCH_CHIP_KL is not set
+# CONFIG_ARCH_CHIP_LM is not set
+# CONFIG_ARCH_CHIP_LPC17XX is not set
+# CONFIG_ARCH_CHIP_LPC214X is not set
+# CONFIG_ARCH_CHIP_LPC2378 is not set
+# CONFIG_ARCH_CHIP_LPC31XX is not set
+# CONFIG_ARCH_CHIP_LPC43XX is not set
+# CONFIG_ARCH_CHIP_NUC1XX is not set
+# CONFIG_ARCH_CHIP_SAMA5 is not set
+# CONFIG_ARCH_CHIP_SAMD is not set
+# CONFIG_ARCH_CHIP_SAM34 is not set
+CONFIG_ARCH_CHIP_STM32=y
+# CONFIG_ARCH_CHIP_STR71X is not set
+# CONFIG_ARCH_ARM7TDMI is not set
+# CONFIG_ARCH_ARM926EJS is not set
+# CONFIG_ARCH_ARM920T is not set
+# CONFIG_ARCH_CORTEXM0 is not set
+# CONFIG_ARCH_CORTEXM3 is not set
+CONFIG_ARCH_CORTEXM4=y
+# CONFIG_ARCH_CORTEXA5 is not set
+# CONFIG_ARCH_CORTEXA8 is not set
+CONFIG_ARCH_FAMILY="armv7-m"
+CONFIG_ARCH_CHIP="stm32"
+# CONFIG_ARMV7M_USEBASEPRI is not set
+CONFIG_ARCH_HAVE_CMNVECTOR=y
+# CONFIG_ARMV7M_CMNVECTOR is not set
+CONFIG_ARCH_HAVE_FPU=y
+# CONFIG_ARCH_FPU is not set
+CONFIG_ARCH_HAVE_MPU=y
+# CONFIG_ARMV7M_MPU is not set
+
+#
+# ARMV7M Configuration Options
+#
+# CONFIG_ARMV7M_TOOLCHAIN_ATOLLIC is not set
+# CONFIG_ARMV7M_TOOLCHAIN_BUILDROOT is not set
+# CONFIG_ARMV7M_TOOLCHAIN_CODEREDW is not set
+CONFIG_ARMV7M_TOOLCHAIN_CODESOURCERYW=y
+# CONFIG_ARMV7M_TOOLCHAIN_DEVKITARM is not set
+# CONFIG_ARMV7M_TOOLCHAIN_GNU_EABIL is not set
+# CONFIG_ARMV7M_TOOLCHAIN_GNU_EABIW is not set
+# CONFIG_ARMV7M_TOOLCHAIN_RAISONANCE is not set
+# CONFIG_SERIAL_TERMIOS is not set
+
+#
+# STM32 Configuration Options
+#
+# CONFIG_ARCH_CHIP_STM32L151C6 is not set
+# CONFIG_ARCH_CHIP_STM32L151C8 is not set
+# CONFIG_ARCH_CHIP_STM32L151CB is not set
+# CONFIG_ARCH_CHIP_STM32L151R6 is not set
+# CONFIG_ARCH_CHIP_STM32L151R8 is not set
+# CONFIG_ARCH_CHIP_STM32L151RB is not set
+# CONFIG_ARCH_CHIP_STM32L151V6 is not set
+# CONFIG_ARCH_CHIP_STM32L151V8 is not set
+# CONFIG_ARCH_CHIP_STM32L151VB is not set
+# CONFIG_ARCH_CHIP_STM32L152C6 is not set
+# CONFIG_ARCH_CHIP_STM32L152C8 is not set
+# CONFIG_ARCH_CHIP_STM32L152CB is not set
+# CONFIG_ARCH_CHIP_STM32L152R6 is not set
+# CONFIG_ARCH_CHIP_STM32L152R8 is not set
+# CONFIG_ARCH_CHIP_STM32L152RB is not set
+# CONFIG_ARCH_CHIP_STM32L152V6 is not set
+# CONFIG_ARCH_CHIP_STM32L152V8 is not set
+# CONFIG_ARCH_CHIP_STM32L152VB is not set
+# CONFIG_ARCH_CHIP_STM32F100C8 is not set
+# CONFIG_ARCH_CHIP_STM32F100CB is not set
+# CONFIG_ARCH_CHIP_STM32F100R8 is not set
+# CONFIG_ARCH_CHIP_STM32F100RB is not set
+# CONFIG_ARCH_CHIP_STM32F100RC is not set
+# CONFIG_ARCH_CHIP_STM32F100RD is not set
+# CONFIG_ARCH_CHIP_STM32F100RE is not set
+# CONFIG_ARCH_CHIP_STM32F100V8 is not set
+# CONFIG_ARCH_CHIP_STM32F100VB is not set
+# CONFIG_ARCH_CHIP_STM32F100VC is not set
+# CONFIG_ARCH_CHIP_STM32F100VD is not set
+# CONFIG_ARCH_CHIP_STM32F100VE is not set
+# CONFIG_ARCH_CHIP_STM32F103C4 is not set
+# CONFIG_ARCH_CHIP_STM32F103C8 is not set
+# CONFIG_ARCH_CHIP_STM32F103T8 is not set
+# CONFIG_ARCH_CHIP_STM32F103TB is not set
+# CONFIG_ARCH_CHIP_STM32F103CB is not set
+# CONFIG_ARCH_CHIP_STM32F103R8 is not set
+# CONFIG_ARCH_CHIP_STM32F103RB is not set
+# CONFIG_ARCH_CHIP_STM32F103V8 is not set
+# CONFIG_ARCH_CHIP_STM32F103VB is not set
+# CONFIG_ARCH_CHIP_STM32F103RE is not set
+# CONFIG_ARCH_CHIP_STM32F103VC is not set
+# CONFIG_ARCH_CHIP_STM32F103VE is not set
+# CONFIG_ARCH_CHIP_STM32F103ZE is not set
+# CONFIG_ARCH_CHIP_STM32F105VB is not set
+# CONFIG_ARCH_CHIP_STM32F107VC is not set
+# CONFIG_ARCH_CHIP_STM32F207IG is not set
+# CONFIG_ARCH_CHIP_STM32F207ZE is not set
+# CONFIG_ARCH_CHIP_STM32F302CB is not set
+# CONFIG_ARCH_CHIP_STM32F302CC is not set
+# CONFIG_ARCH_CHIP_STM32F302RB is not set
+# CONFIG_ARCH_CHIP_STM32F302RC is not set
+# CONFIG_ARCH_CHIP_STM32F302VB is not set
+# CONFIG_ARCH_CHIP_STM32F302VC is not set
+# CONFIG_ARCH_CHIP_STM32F303CB is not set
+# CONFIG_ARCH_CHIP_STM32F303CC is not set
+# CONFIG_ARCH_CHIP_STM32F303RB is not set
+# CONFIG_ARCH_CHIP_STM32F303RC is not set
+# CONFIG_ARCH_CHIP_STM32F303VB is not set
+# CONFIG_ARCH_CHIP_STM32F303VC is not set
+# CONFIG_ARCH_CHIP_STM32F405RG is not set
+# CONFIG_ARCH_CHIP_STM32F405VG is not set
+# CONFIG_ARCH_CHIP_STM32F405ZG is not set
+# CONFIG_ARCH_CHIP_STM32F407VE is not set
+CONFIG_ARCH_CHIP_STM32F407VG=y
+# CONFIG_ARCH_CHIP_STM32F407ZE is not set
+# CONFIG_ARCH_CHIP_STM32F407ZG is not set
+# CONFIG_ARCH_CHIP_STM32F407IE is not set
+# CONFIG_ARCH_CHIP_STM32F407IG is not set
+# CONFIG_ARCH_CHIP_STM32F427V is not set
+# CONFIG_ARCH_CHIP_STM32F427Z is not set
+# CONFIG_ARCH_CHIP_STM32F427I is not set
+# CONFIG_ARCH_CHIP_STM32F429V is not set
+# CONFIG_ARCH_CHIP_STM32F429Z is not set
+# CONFIG_ARCH_CHIP_STM32F429I is not set
+# CONFIG_ARCH_CHIP_STM32F429B is not set
+# CONFIG_ARCH_CHIP_STM32F429N is not set
+# CONFIG_STM32_STM32L15XX is not set
+# CONFIG_STM32_ENERGYLITE is not set
+# CONFIG_STM32_STM32F10XX is not set
+# CONFIG_STM32_VALUELINE is not set
+# CONFIG_STM32_CONNECTIVITYLINE is not set
+# CONFIG_STM32_PERFORMANCELINE is not set
+# CONFIG_STM32_HIGHDENSITY is not set
+# CONFIG_STM32_MEDIUMDENSITY is not set
+# CONFIG_STM32_LOWDENSITY is not set
+# CONFIG_STM32_STM32F20XX is not set
+# CONFIG_STM32_STM32F30XX is not set
+CONFIG_STM32_STM32F40XX=y
+# CONFIG_STM32_DFU is not set
+
+#
+# STM32 Peripheral Support
+#
+# CONFIG_STM32_HAVE_USBDEV is not set
+CONFIG_STM32_HAVE_OTGFS=y
+# CONFIG_STM32_ADC1 is not set
+# CONFIG_STM32_ADC2 is not set
+# CONFIG_STM32_ADC3 is not set
+# CONFIG_STM32_BKPSRAM is not set
+# CONFIG_STM32_CAN1 is not set
+# CONFIG_STM32_CAN2 is not set
+# CONFIG_STM32_CCMDATARAM is not set
+# CONFIG_STM32_CRC is not set
+# CONFIG_STM32_CRYP is not set
+# CONFIG_STM32_DMA1 is not set
+# CONFIG_STM32_DMA2 is not set
+# CONFIG_STM32_DAC1 is not set
+# CONFIG_STM32_DAC2 is not set
+# CONFIG_STM32_DCMI is not set
+# CONFIG_STM32_ETHMAC is not set
+CONFIG_STM32_FSMC=y
+# CONFIG_STM32_HASH is not set
+# CONFIG_STM32_I2C1 is not set
+# CONFIG_STM32_I2C2 is not set
+# CONFIG_STM32_I2C3 is not set
+# CONFIG_STM32_OTGFS is not set
+# CONFIG_STM32_OTGHS is not set
+CONFIG_STM32_PWR=y
+# CONFIG_STM32_RNG is not set
+# CONFIG_STM32_SDIO is not set
+CONFIG_STM32_SPI1=y
+# CONFIG_STM32_SPI2 is not set
+# CONFIG_STM32_SPI3 is not set
+CONFIG_STM32_SYSCFG=y
+# CONFIG_STM32_TIM1 is not set
+# CONFIG_STM32_TIM2 is not set
+# CONFIG_STM32_TIM3 is not set
+# CONFIG_STM32_TIM4 is not set
+# CONFIG_STM32_TIM5 is not set
+# CONFIG_STM32_TIM6 is not set
+# CONFIG_STM32_TIM7 is not set
+# CONFIG_STM32_TIM8 is not set
+# CONFIG_STM32_TIM9 is not set
+# CONFIG_STM32_TIM10 is not set
+# CONFIG_STM32_TIM11 is not set
+# CONFIG_STM32_TIM12 is not set
+# CONFIG_STM32_TIM13 is not set
+# CONFIG_STM32_TIM14 is not set
+# CONFIG_STM32_USART1 is not set
+CONFIG_STM32_USART2=y
+# CONFIG_STM32_USART3 is not set
+# CONFIG_STM32_UART4 is not set
+# CONFIG_STM32_UART5 is not set
+# CONFIG_STM32_USART6 is not set
+# CONFIG_STM32_IWDG is not set
+# CONFIG_STM32_WWDG is not set
+CONFIG_STM32_SPI=y
+
+#
+# Alternate Pin Mapping
+#
+# CONFIG_STM32_FLASH_PREFETCH is not set
+# CONFIG_STM32_JTAG_DISABLE is not set
+# CONFIG_STM32_JTAG_FULL_ENABLE is not set
+# CONFIG_STM32_JTAG_NOJNTRST_ENABLE is not set
+CONFIG_STM32_JTAG_SW_ENABLE=y
+# CONFIG_STM32_DISABLE_IDLE_SLEEP_DURING_DEBUG is not set
+# CONFIG_STM32_FORCEPOWER is not set
+# CONFIG_ARCH_BOARD_STM32_CUSTOM_CLOCKCONFIG is not set
+# CONFIG_STM32_CCMEXCLUDE is not set
+# CONFIG_STM32_FSMC_SRAM is not set
+CONFIG_STM32_USART=y
+
+#
+# U[S]ART Configuration
+#
+# CONFIG_USART2_RS485 is not set
+# CONFIG_SERIAL_DISABLE_REORDERING is not set
+# CONFIG_STM32_USART_SINGLEWIRE is not set
+
+#
+# SPI Configuration
+#
+# CONFIG_STM32_SPI_INTERRUPTS is not set
+# CONFIG_STM32_SPI_DMA is not set
+
+#
+# USB Host Configuration
+#
+
+#
+# USB Device Configuration
+#
+
+#
+# Architecture Options
+#
+# CONFIG_ARCH_NOINTC is not set
+# CONFIG_ARCH_VECNOTIRQ is not set
+# CONFIG_ARCH_DMA is not set
+CONFIG_ARCH_HAVE_IRQPRIO=y
+# CONFIG_ARCH_ADDRENV is not set
+CONFIG_ARCH_HAVE_VFORK=y
+# CONFIG_ARCH_HAVE_MMU is not set
+# CONFIG_ARCH_NAND_HWECC is not set
+# CONFIG_ARCH_IRQPRIO is not set
+CONFIG_ARCH_STACKDUMP=y
+# CONFIG_ENDIAN_BIG is not set
+# CONFIG_ARCH_IDLE_CUSTOM is not set
+# CONFIG_ARCH_HAVE_RAMFUNCS is not set
+CONFIG_ARCH_HAVE_RAMVECTORS=y
+# CONFIG_ARCH_RAMVECTORS is not set
+
+#
+# Board Settings
+#
+CONFIG_BOARD_LOOPSPERMSEC=16717
+# CONFIG_ARCH_CALIBRATION is not set
+
+#
+# Interrupt options
+#
+CONFIG_ARCH_HAVE_INTERRUPTSTACK=y
+CONFIG_ARCH_INTERRUPTSTACK=0
+CONFIG_ARCH_HAVE_HIPRI_INTERRUPT=y
+# CONFIG_ARCH_HIPRI_INTERRUPT is not set
+
+#
+# Boot options
+#
+# CONFIG_BOOT_RUNFROMEXTSRAM is not set
+CONFIG_BOOT_RUNFROMFLASH=y
+# CONFIG_BOOT_RUNFROMISRAM is not set
+# CONFIG_BOOT_RUNFROMSDRAM is not set
+# CONFIG_BOOT_COPYTORAM is not set
+
+#
+# Boot Memory Configuration
+#
+CONFIG_RAM_START=0x20000000
+CONFIG_RAM_SIZE=114688
+# CONFIG_ARCH_HAVE_SDRAM is not set
+
+#
+# Board Selection
+#
+CONFIG_ARCH_BOARD_STM32F4_DISCOVERY=y
+# CONFIG_ARCH_BOARD_MIKROE_STM32F4 is not set
+# CONFIG_ARCH_BOARD_CUSTOM is not set
+CONFIG_ARCH_BOARD="stm32f4discovery"
+
+#
+# Common Board Options
+#
+CONFIG_ARCH_HAVE_LEDS=y
+CONFIG_ARCH_LEDS=y
+CONFIG_ARCH_HAVE_BUTTONS=y
+CONFIG_ARCH_BUTTONS=y
+CONFIG_ARCH_HAVE_IRQBUTTONS=y
+# CONFIG_ARCH_IRQBUTTONS is not set
+CONFIG_NSH_MMCSDMINOR=0
+
+#
+# Board-Specific Options
+#
+
+#
+# RTOS Features
+#
+# CONFIG_BOARD_INITIALIZE is not set
+CONFIG_USEC_PER_TICK=10000
+# CONFIG_SYSTEM_TIME64 is not set
+CONFIG_RR_INTERVAL=200
+# CONFIG_SCHED_CPULOAD is not set
+# CONFIG_SCHED_INSTRUMENTATION is not set
+CONFIG_TASK_NAME_SIZE=0
+# CONFIG_SCHED_HAVE_PARENT is not set
+# CONFIG_JULIAN_TIME is not set
+CONFIG_START_YEAR=2011
+CONFIG_START_MONTH=12
+CONFIG_START_DAY=6
+CONFIG_DEV_CONSOLE=y
+# CONFIG_MUTEX_TYPES is not set
+# CONFIG_PRIORITY_INHERITANCE is not set
+# CONFIG_FDCLONE_DISABLE is not set
+# CONFIG_FDCLONE_STDIO is not set
+CONFIG_SDCLONE_DISABLE=y
+CONFIG_SCHED_WAITPID=y
+# CONFIG_SCHED_STARTHOOK is not set
+# CONFIG_SCHED_ATEXIT is not set
+# CONFIG_SCHED_ONEXIT is not set
+CONFIG_USER_ENTRYPOINT="nxlines_main"
+CONFIG_DISABLE_OS_API=y
+# CONFIG_DISABLE_POSIX_TIMERS is not set
+# CONFIG_DISABLE_PTHREAD is not set
+# CONFIG_DISABLE_SIGNALS is not set
+# CONFIG_DISABLE_MQUEUE is not set
+# CONFIG_DISABLE_ENVIRON is not set
+
+#
+# Signal Numbers
+#
+CONFIG_SIG_SIGUSR1=1
+CONFIG_SIG_SIGUSR2=2
+CONFIG_SIG_SIGALARM=3
+CONFIG_SIG_SIGCONDTIMEDOUT=16
+
+#
+# Sizes of configurable things (0 disables)
+#
+CONFIG_MAX_TASKS=16
+CONFIG_MAX_TASK_ARGS=4
+CONFIG_NPTHREAD_KEYS=4
+CONFIG_NFILE_DESCRIPTORS=8
+CONFIG_NFILE_STREAMS=8
+CONFIG_NAME_MAX=32
+CONFIG_PREALLOC_MQ_MSGS=4
+CONFIG_MQ_MAXMSGSIZE=32
+CONFIG_MAX_WDOGPARMS=2
+CONFIG_PREALLOC_WDOGS=4
+CONFIG_WDOG_INTRESERVE=0
+CONFIG_PREALLOC_TIMERS=4
+
+#
+# Stack and heap information
+#
+CONFIG_IDLETHREAD_STACKSIZE=1024
+CONFIG_USERMAIN_STACKSIZE=2048
+CONFIG_PTHREAD_STACK_MIN=256
+CONFIG_PTHREAD_STACK_DEFAULT=2048
+
+#
+# Device Drivers
+#
+CONFIG_DISABLE_POLL=y
+CONFIG_DEV_NULL=y
+# CONFIG_DEV_ZERO is not set
+# CONFIG_LOOP is not set
+# CONFIG_RAMDISK is not set
+# CONFIG_CAN is not set
+# CONFIG_ARCH_HAVE_PWM_PULSECOUNT is not set
+# CONFIG_PWM is not set
+CONFIG_ARCH_HAVE_I2CRESET=y
+# CONFIG_I2C is not set
+CONFIG_SPI=y
+# CONFIG_SPI_OWNBUS is not set
+CONFIG_SPI_EXCHANGE=y
+# CONFIG_SPI_CMDDATA is not set
+# CONFIG_SPI_BITBANG is not set
+# CONFIG_I2S is not set
+# CONFIG_RTC is not set
+# CONFIG_WATCHDOG is not set
+# CONFIG_ANALOG is not set
+# CONFIG_AUDIO_DEVICES is not set
+# CONFIG_VIDEO_DEVICES is not set
+# CONFIG_BCH is not set
+# CONFIG_INPUT is not set
+CONFIG_LCD=y
+
+#
+# Common LCD Settings
+#
+# CONFIG_LCD_CONSOLE is not set
+# CONFIG_LCD_NOGETRUN is not set
+CONFIG_LCD_MAXCONTRAST=1
+CONFIG_LCD_MAXPOWER=255
+
+#
+# Graphic LCD Devices
+#
+# CONFIG_LCD_P14201 is not set
+# CONFIG_LCD_NOKIA6100 is not set
+# CONFIG_LCD_MIO283QT2 is not set
+# CONFIG_LCD_UG9664HSWAG01 is not set
+# CONFIG_LCD_UG2864HSWEG01 is not set
+# CONFIG_LCD_UG2832HSWEG04 is not set
+# CONFIG_LCD_ST7567 is not set
+# CONFIG_LCD_UG2864AMBAG01 is not set
+CONFIG_LCD_SSD1289=y
+CONFIG_SSD1289_PROFILE1=y
+# CONFIG_SSD1289_PROFILE2 is not set
+# CONFIG_SSD1289_PROFILE3 is not set
+# CONFIG_LCD_SHARP_MEMLCD is not set
+CONFIG_LCD_LANDSCAPE=y
+# CONFIG_LCD_PORTRAIT is not set
+# CONFIG_LCD_RPORTRAIT is not set
+# CONFIG_LCD_RLANDSCAPE is not set
+
+#
+# Alphanumeric/Segment LCD Devices
+#
+# CONFIG_LCD_LCD1602 is not set
+# CONFIG_MMCSD is not set
+# CONFIG_MTD is not set
+# CONFIG_PIPES is not set
+# CONFIG_PM is not set
+# CONFIG_POWER is not set
+# CONFIG_SENSORS is not set
+# CONFIG_SERCOMM_CONSOLE is not set
+CONFIG_SERIAL=y
+# CONFIG_DEV_LOWCONSOLE is not set
+# CONFIG_16550_UART is not set
+# CONFIG_ARCH_HAVE_UART is not set
+# CONFIG_ARCH_HAVE_UART0 is not set
+# CONFIG_ARCH_HAVE_UART1 is not set
+# CONFIG_ARCH_HAVE_UART2 is not set
+# CONFIG_ARCH_HAVE_UART3 is not set
+# CONFIG_ARCH_HAVE_UART4 is not set
+# CONFIG_ARCH_HAVE_UART5 is not set
+# CONFIG_ARCH_HAVE_UART6 is not set
+# CONFIG_ARCH_HAVE_UART7 is not set
+# CONFIG_ARCH_HAVE_UART8 is not set
+# CONFIG_ARCH_HAVE_SCI0 is not set
+# CONFIG_ARCH_HAVE_SCI1 is not set
+# CONFIG_ARCH_HAVE_USART0 is not set
+# CONFIG_ARCH_HAVE_USART1 is not set
+CONFIG_ARCH_HAVE_USART2=y
+# CONFIG_ARCH_HAVE_USART3 is not set
+# CONFIG_ARCH_HAVE_USART4 is not set
+# CONFIG_ARCH_HAVE_USART5 is not set
+# CONFIG_ARCH_HAVE_USART6 is not set
+# CONFIG_ARCH_HAVE_USART7 is not set
+# CONFIG_ARCH_HAVE_USART8 is not set
+
+#
+# USART Configuration
+#
+CONFIG_USART2_ISUART=y
+CONFIG_MCU_SERIAL=y
+CONFIG_STANDARD_SERIAL=y
+CONFIG_USART2_SERIAL_CONSOLE=y
+# CONFIG_NO_SERIAL_CONSOLE is not set
+
+#
+# USART2 Configuration
+#
+CONFIG_USART2_RXBUFSIZE=128
+CONFIG_USART2_TXBUFSIZE=128
+CONFIG_USART2_BAUD=115200
+CONFIG_USART2_BITS=8
+CONFIG_USART2_PARITY=0
+CONFIG_USART2_2STOP=0
+# CONFIG_USART2_IFLOWCONTROL is not set
+# CONFIG_USART2_OFLOWCONTROL is not set
+# CONFIG_SERIAL_IFLOWCONTROL is not set
+# CONFIG_SERIAL_OFLOWCONTROL is not set
+# CONFIG_USBDEV is not set
+# CONFIG_USBHOST is not set
+# CONFIG_WIRELESS is not set
+
+#
+# System Logging Device Options
+#
+
+#
+# System Logging
+#
+# CONFIG_RAMLOG is not set
+
+#
+# Networking Support
+#
+# CONFIG_ARCH_HAVE_NET is not set
+# CONFIG_ARCH_HAVE_PHY is not set
+# CONFIG_NET is not set
+
+#
+# File Systems
+#
+
+#
+# File system configuration
+#
+# CONFIG_DISABLE_MOUNTPOINT is not set
+# CONFIG_DISABLE_PSEUDOFS_OPERATIONS is not set
+# CONFIG_FS_READABLE is not set
+# CONFIG_FS_WRITABLE is not set
+# CONFIG_FS_RAMMAP is not set
+# CONFIG_FS_FAT is not set
+# CONFIG_FS_NXFFS is not set
+# CONFIG_FS_ROMFS is not set
+# CONFIG_FS_SMARTFS is not set
+# CONFIG_FS_PROCFS is not set
+
+#
+# System Logging
+#
+
+# CONFIG_SYSLOG is not set
+
+#
+# Graphics Support
+#
+CONFIG_NX=y
+CONFIG_NX_LCDDRIVER=y
+CONFIG_NX_NPLANES=1
+# CONFIG_NX_WRITEONLY is not set
+
+#
+# Supported Pixel Depths
+#
+CONFIG_NX_DISABLE_1BPP=y
+CONFIG_NX_DISABLE_2BPP=y
+CONFIG_NX_DISABLE_4BPP=y
+CONFIG_NX_DISABLE_8BPP=y
+# CONFIG_NX_DISABLE_16BPP is not set
+CONFIG_NX_DISABLE_24BPP=y
+CONFIG_NX_DISABLE_32BPP=y
+# CONFIG_NX_PACKEDMSFIRST is not set
+
+#
+# Input Devices
+#
+CONFIG_NX_XYINPUT=y
+# CONFIG_NX_XYINPUT_NONE is not set
+CONFIG_NX_XYINPUT_MOUSE=y
+# CONFIG_NX_XYINPUT_TOUCHSCREEN is not set
+CONFIG_NX_KBD=y
+
+#
+# Framed Window Borders
+#
+CONFIG_NXTK_BORDERWIDTH=4
+# CONFIG_NXTK_DEFAULT_BORDERCOLORS is not set
+CONFIG_NXTK_BORDERCOLOR1=0x5cb7
+CONFIG_NXTK_BORDERCOLOR2=0x21c9
+CONFIG_NXTK_BORDERCOLOR3=0xffdf
+# CONFIG_NXTK_AUTORAISE is not set
+
+#
+# Font Selections
+#
+CONFIG_NXFONTS_CHARBITS=7
+# CONFIG_NXFONT_MONO5X8 is not set
+# CONFIG_NXFONT_SANS17X22 is not set
+# CONFIG_NXFONT_SANS20X26 is not set
+CONFIG_NXFONT_SANS23X27=y
+# CONFIG_NXFONT_SANS22X29 is not set
+# CONFIG_NXFONT_SANS28X37 is not set
+# CONFIG_NXFONT_SANS39X48 is not set
+# CONFIG_NXFONT_SANS17X23B is not set
+# CONFIG_NXFONT_SANS20X27B is not set
+CONFIG_NXFONT_SANS22X29B=y
+# CONFIG_NXFONT_SANS28X37B is not set
+# CONFIG_NXFONT_SANS40X49B is not set
+# CONFIG_NXFONT_SERIF22X29 is not set
+# CONFIG_NXFONT_SERIF29X37 is not set
+# CONFIG_NXFONT_SERIF38X48 is not set
+# CONFIG_NXFONT_SERIF22X28B is not set
+# CONFIG_NXFONT_SERIF27X38B is not set
+# CONFIG_NXFONT_SERIF38X49B is not set
+# CONFIG_NXTERM is not set
+
+#
+# NX Multi-user only options
+#
+# CONFIG_NX_MULTIUSER is not set
+
+#
+# Memory Management
+#
+# CONFIG_MM_SMALL is not set
+CONFIG_MM_REGIONS=2
+# CONFIG_ARCH_HAVE_HEAP2 is not set
+# CONFIG_GRAN is not set
+
+#
+# Audio Support
+#
+# CONFIG_AUDIO is not set
+
+#
+# Binary Formats
+#
+# CONFIG_BINFMT_DISABLE is not set
+# CONFIG_BINFMT_EXEPATH is not set
+# CONFIG_NXFLAT is not set
+# CONFIG_ELF is not set
+# CONFIG_BUILTIN is not set
+# CONFIG_PIC is not set
+CONFIG_SYMTAB_ORDEREDBYNAME=y
+
+#
+# Library Routines
+#
+
+#
+# Standard C Library Options
+#
+CONFIG_STDIO_BUFFER_SIZE=64
+CONFIG_STDIO_LINEBUFFER=y
+CONFIG_NUNGET_CHARS=2
+CONFIG_LIB_HOMEDIR="/"
+# CONFIG_LIBM is not set
+# CONFIG_NOPRINTF_FIELDWIDTH is not set
+# CONFIG_LIBC_FLOATINGPOINT is not set
+CONFIG_LIB_RAND_ORDER=1
+# CONFIG_EOL_IS_CR is not set
+# CONFIG_EOL_IS_LF is not set
+# CONFIG_EOL_IS_BOTH_CRLF is not set
+CONFIG_EOL_IS_EITHER_CRLF=y
+# CONFIG_LIBC_EXECFUNCS is not set
+CONFIG_POSIX_SPAWN_PROXY_STACKSIZE=1024
+CONFIG_TASK_SPAWN_DEFAULT_STACKSIZE=2048
+# CONFIG_LIBC_STRERROR is not set
+# CONFIG_LIBC_PERROR_STDOUT is not set
+CONFIG_ARCH_LOWPUTC=y
+CONFIG_LIB_SENDFILE_BUFSIZE=512
+# CONFIG_ARCH_ROMGETC is not set
+# CONFIG_ARCH_OPTIMIZED_FUNCTIONS is not set
+
+#
+# Non-standard Library Support
+#
+# CONFIG_SCHED_WORKQUEUE is not set
+# CONFIG_LIB_KBDCODEC is not set
+# CONFIG_LIB_SLCDCODEC is not set
+
+#
+# Basic CXX Support
+#
+# CONFIG_C99_BOOL8 is not set
+CONFIG_HAVE_CXX=y
+CONFIG_HAVE_CXXINITIALIZE=y
+# CONFIG_CXX_NEWLONG is not set
+
+#
+# uClibc++ Standard C++ Library
+#
+# CONFIG_UCLIBCXX is not set
+
+#
+# Application Configuration
+#
+
+#
+# Built-In Applications
+#
+
+#
+# Examples
+#
+# CONFIG_EXAMPLES_BUTTONS is not set
+# CONFIG_EXAMPLES_CAN is not set
+# CONFIG_EXAMPLES_CONFIGDATA is not set
+# CONFIG_EXAMPLES_CXXTEST is not set
+# CONFIG_EXAMPLES_DHCPD is not set
+# CONFIG_EXAMPLES_ELF is not set
+# CONFIG_EXAMPLES_FTPC is not set
+# CONFIG_EXAMPLES_FTPD is not set
+# CONFIG_EXAMPLES_HELLO is not set
+# CONFIG_EXAMPLES_HELLOXX is not set
+# CONFIG_EXAMPLES_JSON is not set
+# CONFIG_EXAMPLES_HIDKBD is not set
+# CONFIG_EXAMPLES_KEYPADTEST is not set
+# CONFIG_EXAMPLES_IGMP is not set
+# CONFIG_EXAMPLES_LCDRW is not set
+# CONFIG_EXAMPLES_MM is not set
+# CONFIG_EXAMPLES_MODBUS is not set
+# CONFIG_EXAMPLES_MOUNT is not set
+# CONFIG_EXAMPLES_NRF24L01TERM is not set
+# CONFIG_EXAMPLES_NSH is not set
+# CONFIG_EXAMPLES_NULL is not set
+# CONFIG_EXAMPLES_NX is not set
+# CONFIG_EXAMPLES_NXTERM is not set
+# CONFIG_EXAMPLES_NXFFS is not set
+# CONFIG_EXAMPLES_NXFLAT is not set
+# CONFIG_EXAMPLES_NXHELLO is not set
+# CONFIG_EXAMPLES_NXIMAGE is not set
+CONFIG_EXAMPLES_NXLINES=y
+CONFIG_EXAMPLES_NXLINES_VPLANE=0
+CONFIG_EXAMPLES_NXLINES_DEVNO=0
+# CONFIG_EXAMPLES_NXLINES_DEFAULT_COLORS is not set
+CONFIG_EXAMPLES_NXLINES_BGCOLOR=0x0320
+CONFIG_EXAMPLES_NXLINES_LINEWIDTH=16
+CONFIG_EXAMPLES_NXLINES_LINECOLOR=0xffe0
+CONFIG_EXAMPLES_NXLINES_BORDERWIDTH=4
+CONFIG_EXAMPLES_NXLINES_BORDERCOLOR=0xffe0
+CONFIG_EXAMPLES_NXLINES_CIRCLECOLOR=0xf7bb
+CONFIG_EXAMPLES_NXLINES_BPP=16
+# CONFIG_EXAMPLES_NXLINES_EXTERNINIT is not set
+# CONFIG_EXAMPLES_NXTEXT is not set
+# CONFIG_EXAMPLES_OSTEST is not set
+# CONFIG_EXAMPLES_PASHELLO is not set
+# CONFIG_EXAMPLES_PIPE is not set
+# CONFIG_EXAMPLES_POLL is not set
+# CONFIG_EXAMPLES_POSIXSPAWN is not set
+# CONFIG_EXAMPLES_QENCODER is not set
+# CONFIG_EXAMPLES_RGMP is not set
+# CONFIG_EXAMPLES_ROMFS is not set
+# CONFIG_EXAMPLES_SENDMAIL is not set
+# CONFIG_EXAMPLES_SERLOOP is not set
+# CONFIG_EXAMPLES_SLCD is not set
+# CONFIG_EXAMPLES_SMART is not set
+# CONFIG_EXAMPLES_TCPECHO is not set
+# CONFIG_EXAMPLES_TELNETD is not set
+# CONFIG_EXAMPLES_THTTPD is not set
+# CONFIG_EXAMPLES_TIFF is not set
+# CONFIG_EXAMPLES_TOUCHSCREEN is not set
+# CONFIG_EXAMPLES_UDP is not set
+# CONFIG_EXAMPLES_WEBSERVER is not set
+# CONFIG_EXAMPLES_USBSERIAL is not set
+# CONFIG_EXAMPLES_USBTERM is not set
+# CONFIG_EXAMPLES_WATCHDOG is not set
+
+#
+# Graphics Support
+#
+# CONFIG_TIFF is not set
+
+#
+# Interpreters
+#
+# CONFIG_INTERPRETERS_FICL is not set
+# CONFIG_INTERPRETERS_PCODE is not set
+
+#
+# Network Utilities
+#
+
+#
+# Networking Utilities
+#
+# CONFIG_NETUTILS_CODECS is not set
+# CONFIG_NETUTILS_DHCPD is not set
+# CONFIG_NETUTILS_FTPC is not set
+# CONFIG_NETUTILS_FTPD is not set
+# CONFIG_NETUTILS_JSON is not set
+# CONFIG_NETUTILS_SMTP is not set
+# CONFIG_NETUTILS_TFTPC is not set
+# CONFIG_NETUTILS_THTTPD is not set
+# CONFIG_NETUTILS_NETLIB is not set
+# CONFIG_NETUTILS_WEBCLIENT is not set
+
+#
+# FreeModBus
+#
+# CONFIG_MODBUS is not set
+
+#
+# NSH Library
+#
+CONFIG_NSH_LIBRARY=y
+CONFIG_NSH_READLINE=y
+# CONFIG_NSH_CLE is not set
+
+#
+# Disable Individual commands
+#
+# CONFIG_NSH_DISABLE_ADDROUTE is not set
+# CONFIG_NSH_DISABLE_CAT is not set
+# CONFIG_NSH_DISABLE_CD is not set
+# CONFIG_NSH_DISABLE_CP is not set
+# CONFIG_NSH_DISABLE_CMP is not set
+# CONFIG_NSH_DISABLE_DD is not set
+# CONFIG_NSH_DISABLE_DF is not set
+# CONFIG_NSH_DISABLE_DELROUTE is not set
+# CONFIG_NSH_DISABLE_ECHO is not set
+# CONFIG_NSH_DISABLE_EXEC is not set
+# CONFIG_NSH_DISABLE_EXIT is not set
+# CONFIG_NSH_DISABLE_FREE is not set
+# CONFIG_NSH_DISABLE_GET is not set
+# CONFIG_NSH_DISABLE_HELP is not set
+# CONFIG_NSH_DISABLE_HEXDUMP is not set
+# CONFIG_NSH_DISABLE_IFCONFIG is not set
+# CONFIG_NSH_DISABLE_KILL is not set
+# CONFIG_NSH_DISABLE_LOSETUP is not set
+# CONFIG_NSH_DISABLE_LS is not set
+# CONFIG_NSH_DISABLE_MB is not set
+# CONFIG_NSH_DISABLE_MKDIR is not set
+# CONFIG_NSH_DISABLE_MKFIFO is not set
+# CONFIG_NSH_DISABLE_MKRD is not set
+# CONFIG_NSH_DISABLE_MH is not set
+# CONFIG_NSH_DISABLE_MOUNT is not set
+# CONFIG_NSH_DISABLE_MW is not set
+# CONFIG_NSH_DISABLE_PS is not set
+# CONFIG_NSH_DISABLE_PUT is not set
+# CONFIG_NSH_DISABLE_PWD is not set
+# CONFIG_NSH_DISABLE_RM is not set
+# CONFIG_NSH_DISABLE_RMDIR is not set
+# CONFIG_NSH_DISABLE_SET is not set
+# CONFIG_NSH_DISABLE_SH is not set
+# CONFIG_NSH_DISABLE_SLEEP is not set
+# CONFIG_NSH_DISABLE_TEST is not set
+# CONFIG_NSH_DISABLE_UMOUNT is not set
+# CONFIG_NSH_DISABLE_UNSET is not set
+# CONFIG_NSH_DISABLE_USLEEP is not set
+# CONFIG_NSH_DISABLE_WGET is not set
+# CONFIG_NSH_DISABLE_XD is not set
+
+#
+# Configure Command Options
+#
+CONFIG_NSH_CMDOPT_DF_H=y
+CONFIG_NSH_CODECS_BUFSIZE=128
+CONFIG_NSH_CMDOPT_HEXDUMP=y
+CONFIG_NSH_FILEIOSIZE=512
+CONFIG_NSH_LINELEN=64
+# CONFIG_NSH_DISABLE_SEMICOLON is not set
+CONFIG_NSH_CMDPARMS=y
+CONFIG_NSH_TMPDIR="/tmp"
+CONFIG_NSH_MAXARGUMENTS=6
+CONFIG_NSH_ARGCAT=y
+CONFIG_NSH_NESTDEPTH=3
+# CONFIG_NSH_DISABLESCRIPT is not set
+# CONFIG_NSH_DISABLE_ITEF is not set
+# CONFIG_NSH_DISABLE_LOOPS is not set
+# CONFIG_NSH_DISABLEBG is not set
+CONFIG_NSH_CONSOLE=y
+
+#
+# USB Trace Support
+#
+# CONFIG_NSH_ALTCONDEV is not set
+# CONFIG_NSH_ARCHINIT is not set
+
+#
+# NxWidgets/NxWM
+#
+# CONFIG_NXWIDGETS is not set
+
+#
+# Platform-specific Support
+#
+# CONFIG_PLATFORM_CONFIGDATA is not set
+
+#
+# System Libraries and NSH Add-Ons
+#
+
+#
+# USB CDC/ACM Device Commands
+#
+
+#
+# USB Composite Device Commands
+#
+
+#
+# Custom Free Memory Command
+#
+# CONFIG_SYSTEM_FREE is not set
+
+#
+# I2C tool
+#
+
+#
+# INI File Parser
+#
+# CONFIG_SYSTEM_INIFILE is not set
+
+#
+# FLASH Program Installation
+#
+# CONFIG_SYSTEM_INSTALL is not set
+
+#
+# FLASH Erase-all Command
+#
+
+#
+# NxPlayer media player library / command Line
+#
+# CONFIG_SYSTEM_NXPLAYER is not set
+
+#
+# RAM test
+#
+# CONFIG_SYSTEM_RAMTEST is not set
+
+#
+# readline()
+#
+CONFIG_SYSTEM_READLINE=y
+CONFIG_READLINE_ECHO=y
+
+#
+# Power Off
+#
+# CONFIG_SYSTEM_POWEROFF is not set
+
+#
+# RAMTRON
+#
+# CONFIG_SYSTEM_RAMTRON is not set
+
+#
+# SD Card
+#
+# CONFIG_SYSTEM_SDCARD is not set
+
+#
+# Sysinfo
+#
+# CONFIG_SYSTEM_SYSINFO is not set
+
+#
+# USB Monitor
+#
+
+#
+# EMACS-like Command Line Editor
+#
+# CONFIG_SYSTEM_CLE is not set
+
+#
+# VI Work-Alike Editor
+#
+# CONFIG_SYSTEM_VI is not set
+
+#
+# Stack Monitor
+#
+
+#
+# USB Mass Storage Device Commands
+#
+
+#
+# Zmodem Commands
+#
+# CONFIG_SYSTEM_ZMODEM is not set
diff --git a/nuttx/configs/px4fmu-v2/nxlines/setenv.sh b/nuttx/configs/px4fmu-v2/nxlines/setenv.sh
new file mode 100755
index 000000000..033d1aece
--- /dev/null
+++ b/nuttx/configs/px4fmu-v2/nxlines/setenv.sh
@@ -0,0 +1,76 @@
+#!/bin/bash
+# configs/stm32f4discovery/nxlines/setenv.sh
+#
+#   Copyright (C) 2012 Gregory Nutt. All rights reserved.
+#   Author: Gregory Nutt <gnutt@nuttx.org>
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions
+# are met:
+#
+# 1. Redistributions of source code must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+# 2. Redistributions in binary form must reproduce the above copyright
+#    notice, this list of conditions and the following disclaimer in
+#    the documentation and/or other materials provided with the
+#    distribution.
+# 3. Neither the name NuttX nor the names of its contributors may be
+#    used to endorse or promote products derived from this software
+#    without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+#
+
+if [ "$_" = "$0" ] ; then
+  echo "You must source this script, not run it!" 1>&2
+  exit 1
+fi
+
+WD=`pwd`
+if [ ! -x "setenv.sh" ]; then
+  echo "This script must be executed from the top-level NuttX build directory"
+  exit 1
+fi
+
+if [ -z "${PATH_ORIG}" ]; then
+  export PATH_ORIG="${PATH}"
+fi
+
+# This is the Cygwin path to the location where I installed the RIDE
+# toolchain under windows.  You will also have to edit this if you install
+# the RIDE toolchain in any other location
+#export TOOLCHAIN_BIN="/cygdrive/c/Program Files (x86)/Raisonance/Ride/arm-gcc/bin"
+
+# This is the Cygwin path to the location where I installed the CodeSourcery
+# toolchain under windows.  You will also have to edit this if you install
+# the CodeSourcery toolchain in any other location
+export TOOLCHAIN_BIN="/cygdrive/c/Program Files (x86)/CodeSourcery/Sourcery G++ Lite/bin"
+#export TOOLCHAIN_BIN="/cygdrive/c/Users/MyName/MentorGraphics/Sourcery_CodeBench_Lite_for_ARM_EABI/bin"
+
+# These are the Cygwin paths to the locations where I installed the Atollic
+# toolchain under windows.  You will also have to edit this if you install
+# the Atollic toolchain in any other location.  /usr/bin is added before
+# the Atollic bin path because there is are binaries named gcc.exe and g++.exe
+# at those locations as well.
+#export TOOLCHAIN_BIN="/usr/bin:/cygdrive/c/Program Files (x86)/Atollic/TrueSTUDIO for ARM Pro 2.3.0/ARMTools/bin"
+#export TOOLCHAIN_BIN="/usr/bin:/cygdrive/c/Program Files (x86)/Atollic/TrueSTUDIO for STMicroelectronics STM32 Lite 2.3.0/ARMTools/bin"
+
+# This is the Cygwin path to the location where I build the buildroot
+# toolchain.
+#export TOOLCHAIN_BIN="${WD}/../misc/buildroot/build_arm_nofpu/staging_dir/bin"
+
+# Add the path to the toolchain to the PATH varialble
+export PATH="${TOOLCHAIN_BIN}:/sbin:/usr/sbin:${PATH_ORIG}"
+
+echo "PATH : ${PATH}"
diff --git a/nuttx/configs/px4fmu-v2/pm/Make.defs b/nuttx/configs/px4fmu-v2/pm/Make.defs
new file mode 100644
index 000000000..60ecc3171
--- /dev/null
+++ b/nuttx/configs/px4fmu-v2/pm/Make.defs
@@ -0,0 +1,112 @@
+############################################################################
+# configs/stm32f4discovery/pm/Make.defs
+#
+#   Copyright (C) 2012 Gregory Nutt. All rights reserved.
+#   Author: Gregory Nutt <gnutt@nuttx.org>
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions
+# are met:
+#
+# 1. Redistributions of source code must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+# 2. Redistributions in binary form must reproduce the above copyright
+#    notice, this list of conditions and the following disclaimer in
+#    the documentation and/or other materials provided with the
+#    distribution.
+# 3. Neither the name NuttX nor the names of its contributors may be
+#    used to endorse or promote products derived from this software
+#    without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+#
+############################################################################
+
+include ${TOPDIR}/.config
+include ${TOPDIR}/tools/Config.mk
+include ${TOPDIR}/arch/arm/src/armv7-m/Toolchain.defs
+
+LDSCRIPT = ld.script
+
+ifeq ($(WINTOOL),y)
+  # Windows-native toolchains
+  DIRLINK = $(TOPDIR)/tools/copydir.sh
+  DIRUNLINK = $(TOPDIR)/tools/unlink.sh
+  MKDEP = $(TOPDIR)/tools/mknulldeps.sh
+  ARCHINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}"
+  ARCHXXINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}" -isystem "${shell cygpath -w $(TOPDIR)/include/cxx}"
+  ARCHSCRIPT = -T "${shell cygpath -w $(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/scripts/$(LDSCRIPT)}"
+else
+  # Linux/Cygwin-native toolchain
+  MKDEP = $(TOPDIR)/tools/mkdeps.sh
+  ARCHINCLUDES = -I. -isystem $(TOPDIR)/include
+  ARCHXXINCLUDES = -I. -isystem $(TOPDIR)/include -isystem $(TOPDIR)/include/cxx
+  ARCHSCRIPT = -T$(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/scripts/$(LDSCRIPT)
+endif
+
+CC = $(CROSSDEV)gcc
+CXX = $(CROSSDEV)g++
+CPP = $(CROSSDEV)gcc -E
+LD = $(CROSSDEV)ld
+AR = $(ARCROSSDEV)ar rcs
+NM = $(ARCROSSDEV)nm
+OBJCOPY = $(CROSSDEV)objcopy
+OBJDUMP = $(CROSSDEV)objdump
+
+ARCHCCVERSION = ${shell $(CC) -v 2>&1 | sed -n '/^gcc version/p' | sed -e 's/^gcc version \([0-9\.]\)/\1/g' -e 's/[-\ ].*//g' -e '1q'}
+ARCHCCMAJOR = ${shell echo $(ARCHCCVERSION) | cut -d'.' -f1}
+
+ifeq ($(CONFIG_DEBUG_SYMBOLS),y)
+  ARCHOPTIMIZATION = -g
+endif
+
+ifneq ($(CONFIG_DEBUG_NOOPT),y)
+  ARCHOPTIMIZATION += $(MAXOPTIMIZATION) -fno-strict-aliasing -fno-strength-reduce -fomit-frame-pointer
+endif
+
+ARCHCFLAGS = -fno-builtin
+ARCHCXXFLAGS = -fno-builtin -fno-exceptions -fno-rtti
+ARCHWARNINGS = -Wall -Wstrict-prototypes -Wshadow
+ARCHWARNINGSXX = -Wall -Wshadow
+ARCHDEFINES =
+ARCHPICFLAGS = -fpic -msingle-pic-base -mpic-register=r10
+
+CFLAGS = $(ARCHCFLAGS) $(ARCHWARNINGS) $(ARCHOPTIMIZATION) $(ARCHCPUFLAGS) $(ARCHINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES) -pipe
+CPICFLAGS = $(ARCHPICFLAGS) $(CFLAGS)
+CXXFLAGS = $(ARCHCXXFLAGS) $(ARCHWARNINGSXX) $(ARCHOPTIMIZATION) $(ARCHCPUFLAGS) $(ARCHXXINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES) -pipe
+CXXPICFLAGS = $(ARCHPICFLAGS) $(CXXFLAGS)
+CPPFLAGS = $(ARCHINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES)
+AFLAGS = $(CFLAGS) -D__ASSEMBLY__
+
+NXFLATLDFLAGS1 = -r -d -warn-common
+NXFLATLDFLAGS2 = $(NXFLATLDFLAGS1) -T$(TOPDIR)/binfmt/libnxflat/gnu-nxflat-pcrel.ld -no-check-sections
+LDNXFLATFLAGS = -e main -s 2048
+
+OBJEXT = .o
+LIBEXT = .a
+EXEEXT =
+
+ifneq ($(CROSSDEV),arm-nuttx-elf-)
+  LDFLAGS += -nostartfiles -nodefaultlibs
+endif
+ifeq ($(CONFIG_DEBUG_SYMBOLS),y)
+  LDFLAGS += -g
+endif
+
+
+HOSTCC = gcc
+HOSTINCLUDES = -I.
+HOSTCFLAGS = -Wall -Wstrict-prototypes -Wshadow -g -pipe
+HOSTLDFLAGS =
+
diff --git a/nuttx/configs/px4fmu-v2/pm/defconfig b/nuttx/configs/px4fmu-v2/pm/defconfig
new file mode 100644
index 000000000..3bc81a748
--- /dev/null
+++ b/nuttx/configs/px4fmu-v2/pm/defconfig
@@ -0,0 +1,938 @@
+#
+# Automatically generated file; DO NOT EDIT.
+# Nuttx/ Configuration
+#
+
+#
+# Build Setup
+#
+# CONFIG_EXPERIMENTAL is not set
+# CONFIG_DEFAULT_SMALL is not set
+# CONFIG_HOST_LINUX is not set
+# CONFIG_HOST_OSX is not set
+CONFIG_HOST_WINDOWS=y
+# CONFIG_HOST_OTHER is not set
+# CONFIG_WINDOWS_NATIVE is not set
+CONFIG_WINDOWS_CYGWIN=y
+# CONFIG_WINDOWS_MSYS is not set
+# CONFIG_WINDOWS_OTHER is not set
+
+#
+# Build Configuration
+#
+# CONFIG_APPS_DIR="../apps"
+# CONFIG_BUILD_2PASS is not set
+
+#
+# Binary Output Formats
+#
+# CONFIG_RRLOAD_BINARY is not set
+CONFIG_INTELHEX_BINARY=y
+# CONFIG_MOTOROLA_SREC is not set
+CONFIG_RAW_BINARY=y
+
+#
+# Customize Header Files
+#
+# CONFIG_ARCH_STDINT_H is not set
+# CONFIG_ARCH_STDBOOL_H is not set
+# CONFIG_ARCH_MATH_H is not set
+# CONFIG_ARCH_FLOAT_H is not set
+# CONFIG_ARCH_STDARG_H is not set
+
+#
+# Debug Options
+#
+# CONFIG_DEBUG is not set
+CONFIG_ARCH_HAVE_STACKCHECK=y
+CONFIG_ARCH_HAVE_HEAPCHECK=y
+# CONFIG_DEBUG_SYMBOLS is not set
+CONFIG_ARCH_HAVE_CUSTOMOPT=y
+# CONFIG_DEBUG_NOOPT is not set
+# CONFIG_DEBUG_CUSTOMOPT is not set
+CONFIG_DEBUG_FULLOPT=y
+
+#
+# System Type
+#
+CONFIG_ARCH_ARM=y
+# CONFIG_ARCH_AVR is not set
+# CONFIG_ARCH_HC is not set
+# CONFIG_ARCH_MIPS is not set
+# CONFIG_ARCH_RGMP is not set
+# CONFIG_ARCH_SH is not set
+# CONFIG_ARCH_SIM is not set
+# CONFIG_ARCH_X86 is not set
+# CONFIG_ARCH_Z16 is not set
+# CONFIG_ARCH_Z80 is not set
+CONFIG_ARCH="arm"
+
+#
+# ARM Options
+#
+# CONFIG_ARCH_CHIP_A1X is not set
+# CONFIG_ARCH_CHIP_C5471 is not set
+# CONFIG_ARCH_CHIP_CALYPSO is not set
+# CONFIG_ARCH_CHIP_DM320 is not set
+# CONFIG_ARCH_CHIP_IMX is not set
+# CONFIG_ARCH_CHIP_KINETIS is not set
+# CONFIG_ARCH_CHIP_KL is not set
+# CONFIG_ARCH_CHIP_LM is not set
+# CONFIG_ARCH_CHIP_LPC17XX is not set
+# CONFIG_ARCH_CHIP_LPC214X is not set
+# CONFIG_ARCH_CHIP_LPC2378 is not set
+# CONFIG_ARCH_CHIP_LPC31XX is not set
+# CONFIG_ARCH_CHIP_LPC43XX is not set
+# CONFIG_ARCH_CHIP_NUC1XX is not set
+# CONFIG_ARCH_CHIP_SAMA5 is not set
+# CONFIG_ARCH_CHIP_SAMD is not set
+# CONFIG_ARCH_CHIP_SAM34 is not set
+CONFIG_ARCH_CHIP_STM32=y
+# CONFIG_ARCH_CHIP_STR71X is not set
+# CONFIG_ARCH_ARM7TDMI is not set
+# CONFIG_ARCH_ARM926EJS is not set
+# CONFIG_ARCH_ARM920T is not set
+# CONFIG_ARCH_CORTEXM0 is not set
+# CONFIG_ARCH_CORTEXM3 is not set
+CONFIG_ARCH_CORTEXM4=y
+# CONFIG_ARCH_CORTEXA5 is not set
+# CONFIG_ARCH_CORTEXA8 is not set
+CONFIG_ARCH_FAMILY="armv7-m"
+CONFIG_ARCH_CHIP="stm32"
+# CONFIG_ARMV7M_USEBASEPRI is not set
+CONFIG_ARCH_HAVE_CMNVECTOR=y
+# CONFIG_ARMV7M_CMNVECTOR is not set
+CONFIG_ARCH_HAVE_FPU=y
+# CONFIG_ARCH_FPU is not set
+CONFIG_ARCH_HAVE_MPU=y
+# CONFIG_ARMV7M_MPU is not set
+
+#
+# ARMV7M Configuration Options
+#
+# CONFIG_ARMV7M_TOOLCHAIN_ATOLLIC is not set
+# CONFIG_ARMV7M_TOOLCHAIN_BUILDROOT is not set
+# CONFIG_ARMV7M_TOOLCHAIN_CODEREDW is not set
+CONFIG_ARMV7M_TOOLCHAIN_CODESOURCERYW=y
+# CONFIG_ARMV7M_TOOLCHAIN_DEVKITARM is not set
+# CONFIG_ARMV7M_TOOLCHAIN_GNU_EABIL is not set
+# CONFIG_ARMV7M_TOOLCHAIN_GNU_EABIW is not set
+# CONFIG_ARMV7M_TOOLCHAIN_RAISONANCE is not set
+# CONFIG_SERIAL_TERMIOS is not set
+
+#
+# STM32 Configuration Options
+#
+# CONFIG_ARCH_CHIP_STM32L151C6 is not set
+# CONFIG_ARCH_CHIP_STM32L151C8 is not set
+# CONFIG_ARCH_CHIP_STM32L151CB is not set
+# CONFIG_ARCH_CHIP_STM32L151R6 is not set
+# CONFIG_ARCH_CHIP_STM32L151R8 is not set
+# CONFIG_ARCH_CHIP_STM32L151RB is not set
+# CONFIG_ARCH_CHIP_STM32L151V6 is not set
+# CONFIG_ARCH_CHIP_STM32L151V8 is not set
+# CONFIG_ARCH_CHIP_STM32L151VB is not set
+# CONFIG_ARCH_CHIP_STM32L152C6 is not set
+# CONFIG_ARCH_CHIP_STM32L152C8 is not set
+# CONFIG_ARCH_CHIP_STM32L152CB is not set
+# CONFIG_ARCH_CHIP_STM32L152R6 is not set
+# CONFIG_ARCH_CHIP_STM32L152R8 is not set
+# CONFIG_ARCH_CHIP_STM32L152RB is not set
+# CONFIG_ARCH_CHIP_STM32L152V6 is not set
+# CONFIG_ARCH_CHIP_STM32L152V8 is not set
+# CONFIG_ARCH_CHIP_STM32L152VB is not set
+# CONFIG_ARCH_CHIP_STM32F100C8 is not set
+# CONFIG_ARCH_CHIP_STM32F100CB is not set
+# CONFIG_ARCH_CHIP_STM32F100R8 is not set
+# CONFIG_ARCH_CHIP_STM32F100RB is not set
+# CONFIG_ARCH_CHIP_STM32F100RC is not set
+# CONFIG_ARCH_CHIP_STM32F100RD is not set
+# CONFIG_ARCH_CHIP_STM32F100RE is not set
+# CONFIG_ARCH_CHIP_STM32F100V8 is not set
+# CONFIG_ARCH_CHIP_STM32F100VB is not set
+# CONFIG_ARCH_CHIP_STM32F100VC is not set
+# CONFIG_ARCH_CHIP_STM32F100VD is not set
+# CONFIG_ARCH_CHIP_STM32F100VE is not set
+# CONFIG_ARCH_CHIP_STM32F103C4 is not set
+# CONFIG_ARCH_CHIP_STM32F103C8 is not set
+# CONFIG_ARCH_CHIP_STM32F103T8 is not set
+# CONFIG_ARCH_CHIP_STM32F103TB is not set
+# CONFIG_ARCH_CHIP_STM32F103CB is not set
+# CONFIG_ARCH_CHIP_STM32F103R8 is not set
+# CONFIG_ARCH_CHIP_STM32F103RB is not set
+# CONFIG_ARCH_CHIP_STM32F103V8 is not set
+# CONFIG_ARCH_CHIP_STM32F103VB is not set
+# CONFIG_ARCH_CHIP_STM32F103RE is not set
+# CONFIG_ARCH_CHIP_STM32F103VC is not set
+# CONFIG_ARCH_CHIP_STM32F103VE is not set
+# CONFIG_ARCH_CHIP_STM32F103ZE is not set
+# CONFIG_ARCH_CHIP_STM32F105VB is not set
+# CONFIG_ARCH_CHIP_STM32F107VC is not set
+# CONFIG_ARCH_CHIP_STM32F207IG is not set
+# CONFIG_ARCH_CHIP_STM32F207ZE is not set
+# CONFIG_ARCH_CHIP_STM32F302CB is not set
+# CONFIG_ARCH_CHIP_STM32F302CC is not set
+# CONFIG_ARCH_CHIP_STM32F302RB is not set
+# CONFIG_ARCH_CHIP_STM32F302RC is not set
+# CONFIG_ARCH_CHIP_STM32F302VB is not set
+# CONFIG_ARCH_CHIP_STM32F302VC is not set
+# CONFIG_ARCH_CHIP_STM32F303CB is not set
+# CONFIG_ARCH_CHIP_STM32F303CC is not set
+# CONFIG_ARCH_CHIP_STM32F303RB is not set
+# CONFIG_ARCH_CHIP_STM32F303RC is not set
+# CONFIG_ARCH_CHIP_STM32F303VB is not set
+# CONFIG_ARCH_CHIP_STM32F303VC is not set
+# CONFIG_ARCH_CHIP_STM32F405RG is not set
+# CONFIG_ARCH_CHIP_STM32F405VG is not set
+# CONFIG_ARCH_CHIP_STM32F405ZG is not set
+# CONFIG_ARCH_CHIP_STM32F407VE is not set
+CONFIG_ARCH_CHIP_STM32F407VG=y
+# CONFIG_ARCH_CHIP_STM32F407ZE is not set
+# CONFIG_ARCH_CHIP_STM32F407ZG is not set
+# CONFIG_ARCH_CHIP_STM32F407IE is not set
+# CONFIG_ARCH_CHIP_STM32F407IG is not set
+# CONFIG_ARCH_CHIP_STM32F427V is not set
+# CONFIG_ARCH_CHIP_STM32F427Z is not set
+# CONFIG_ARCH_CHIP_STM32F427I is not set
+# CONFIG_ARCH_CHIP_STM32F429V is not set
+# CONFIG_ARCH_CHIP_STM32F429Z is not set
+# CONFIG_ARCH_CHIP_STM32F429I is not set
+# CONFIG_ARCH_CHIP_STM32F429B is not set
+# CONFIG_ARCH_CHIP_STM32F429N is not set
+# CONFIG_STM32_STM32L15XX is not set
+# CONFIG_STM32_ENERGYLITE is not set
+# CONFIG_STM32_STM32F10XX is not set
+# CONFIG_STM32_VALUELINE is not set
+# CONFIG_STM32_CONNECTIVITYLINE is not set
+# CONFIG_STM32_PERFORMANCELINE is not set
+# CONFIG_STM32_HIGHDENSITY is not set
+# CONFIG_STM32_MEDIUMDENSITY is not set
+# CONFIG_STM32_LOWDENSITY is not set
+# CONFIG_STM32_STM32F20XX is not set
+# CONFIG_STM32_STM32F30XX is not set
+CONFIG_STM32_STM32F40XX=y
+# CONFIG_STM32_DFU is not set
+
+#
+# STM32 Peripheral Support
+#
+# CONFIG_STM32_HAVE_USBDEV is not set
+CONFIG_STM32_HAVE_OTGFS=y
+# CONFIG_STM32_ADC1 is not set
+# CONFIG_STM32_ADC2 is not set
+# CONFIG_STM32_ADC3 is not set
+# CONFIG_STM32_BKPSRAM is not set
+# CONFIG_STM32_CAN1 is not set
+# CONFIG_STM32_CAN2 is not set
+# CONFIG_STM32_CCMDATARAM is not set
+# CONFIG_STM32_CRC is not set
+# CONFIG_STM32_CRYP is not set
+# CONFIG_STM32_DMA1 is not set
+# CONFIG_STM32_DMA2 is not set
+# CONFIG_STM32_DAC1 is not set
+# CONFIG_STM32_DAC2 is not set
+# CONFIG_STM32_DCMI is not set
+# CONFIG_STM32_ETHMAC is not set
+# CONFIG_STM32_FSMC is not set
+# CONFIG_STM32_HASH is not set
+# CONFIG_STM32_I2C1 is not set
+# CONFIG_STM32_I2C2 is not set
+# CONFIG_STM32_I2C3 is not set
+CONFIG_STM32_OTGFS=y
+# CONFIG_STM32_OTGHS is not set
+CONFIG_STM32_PWR=y
+# CONFIG_STM32_RNG is not set
+# CONFIG_STM32_SDIO is not set
+# CONFIG_STM32_SPI1 is not set
+# CONFIG_STM32_SPI2 is not set
+# CONFIG_STM32_SPI3 is not set
+CONFIG_STM32_SYSCFG=y
+CONFIG_STM32_TIM1=y
+# CONFIG_STM32_TIM2 is not set
+# CONFIG_STM32_TIM3 is not set
+# CONFIG_STM32_TIM4 is not set
+# CONFIG_STM32_TIM5 is not set
+# CONFIG_STM32_TIM6 is not set
+# CONFIG_STM32_TIM7 is not set
+# CONFIG_STM32_TIM8 is not set
+# CONFIG_STM32_TIM9 is not set
+# CONFIG_STM32_TIM10 is not set
+# CONFIG_STM32_TIM11 is not set
+# CONFIG_STM32_TIM12 is not set
+# CONFIG_STM32_TIM13 is not set
+# CONFIG_STM32_TIM14 is not set
+# CONFIG_STM32_USART1 is not set
+CONFIG_STM32_USART2=y
+# CONFIG_STM32_USART3 is not set
+# CONFIG_STM32_UART4 is not set
+# CONFIG_STM32_UART5 is not set
+# CONFIG_STM32_USART6 is not set
+# CONFIG_STM32_IWDG is not set
+# CONFIG_STM32_WWDG is not set
+
+#
+# Alternate Pin Mapping
+#
+# CONFIG_STM32_FLASH_PREFETCH is not set
+# CONFIG_STM32_JTAG_DISABLE is not set
+# CONFIG_STM32_JTAG_FULL_ENABLE is not set
+# CONFIG_STM32_JTAG_NOJNTRST_ENABLE is not set
+CONFIG_STM32_JTAG_SW_ENABLE=y
+# CONFIG_STM32_DISABLE_IDLE_SLEEP_DURING_DEBUG is not set
+# CONFIG_STM32_FORCEPOWER is not set
+# CONFIG_ARCH_BOARD_STM32_CUSTOM_CLOCKCONFIG is not set
+# CONFIG_STM32_CCMEXCLUDE is not set
+# CONFIG_STM32_TIM1_PWM is not set
+CONFIG_STM32_USART=y
+
+#
+# U[S]ART Configuration
+#
+# CONFIG_USART2_RS485 is not set
+# CONFIG_SERIAL_DISABLE_REORDERING is not set
+# CONFIG_STM32_USART_SINGLEWIRE is not set
+
+#
+# USB Host Configuration
+#
+
+#
+# USB Device Configuration
+#
+
+#
+# Architecture Options
+#
+# CONFIG_ARCH_NOINTC is not set
+# CONFIG_ARCH_VECNOTIRQ is not set
+# CONFIG_ARCH_DMA is not set
+CONFIG_ARCH_HAVE_IRQPRIO=y
+# CONFIG_ARCH_ADDRENV is not set
+CONFIG_ARCH_HAVE_VFORK=y
+# CONFIG_ARCH_HAVE_MMU is not set
+# CONFIG_ARCH_NAND_HWECC is not set
+# CONFIG_ARCH_IRQPRIO is not set
+CONFIG_ARCH_STACKDUMP=y
+# CONFIG_ENDIAN_BIG is not set
+CONFIG_ARCH_IDLE_CUSTOM=y
+CONFIG_ARCH_CUSTOM_PMINIT=y
+# CONFIG_ARCH_HAVE_RAMFUNCS is not set
+CONFIG_ARCH_HAVE_RAMVECTORS=y
+# CONFIG_ARCH_RAMVECTORS is not set
+
+#
+# Board Settings
+#
+CONFIG_BOARD_LOOPSPERMSEC=16717
+# CONFIG_ARCH_CALIBRATION is not set
+
+#
+# Interrupt options
+#
+CONFIG_ARCH_HAVE_INTERRUPTSTACK=y
+CONFIG_ARCH_INTERRUPTSTACK=0
+CONFIG_ARCH_HAVE_HIPRI_INTERRUPT=y
+# CONFIG_ARCH_HIPRI_INTERRUPT is not set
+
+#
+# Boot options
+#
+# CONFIG_BOOT_RUNFROMEXTSRAM is not set
+CONFIG_BOOT_RUNFROMFLASH=y
+# CONFIG_BOOT_RUNFROMISRAM is not set
+# CONFIG_BOOT_RUNFROMSDRAM is not set
+# CONFIG_BOOT_COPYTORAM is not set
+
+#
+# Boot Memory Configuration
+#
+CONFIG_RAM_START=0x20000000
+CONFIG_RAM_SIZE=114688
+# CONFIG_ARCH_HAVE_SDRAM is not set
+
+#
+# Board Selection
+#
+CONFIG_ARCH_BOARD_STM32F4_DISCOVERY=y
+# CONFIG_ARCH_BOARD_MIKROE_STM32F4 is not set
+# CONFIG_ARCH_BOARD_CUSTOM is not set
+CONFIG_ARCH_BOARD="stm32f4discovery"
+
+#
+# Common Board Options
+#
+CONFIG_ARCH_HAVE_LEDS=y
+# CONFIG_ARCH_LEDS is not set
+CONFIG_ARCH_HAVE_BUTTONS=y
+CONFIG_ARCH_BUTTONS=y
+CONFIG_ARCH_HAVE_IRQBUTTONS=y
+CONFIG_ARCH_IRQBUTTONS=y
+CONFIG_NSH_MMCSDMINOR=0
+
+#
+# Board-Specific Options
+#
+CONFIG_PM_ALARM_SEC=15
+CONFIG_PM_ALARM_NSEC=0
+# CONFIG_PM_SLEEP_WAKEUP is not set
+CONFIG_PM_SLEEP_WAKEUP_SEC=10
+CONFIG_PM_SLEEP_WAKEUP_NSEC=0
+CONFIG_PM_BUTTONS=y
+CONFIG_PM_BUTTON_ACTIVITY=10
+
+#
+# RTOS Features
+#
+# CONFIG_BOARD_INITIALIZE is not set
+CONFIG_USEC_PER_TICK=10000
+# CONFIG_SYSTEM_TIME64 is not set
+CONFIG_RR_INTERVAL=200
+# CONFIG_SCHED_CPULOAD is not set
+# CONFIG_SCHED_INSTRUMENTATION is not set
+CONFIG_TASK_NAME_SIZE=0
+# CONFIG_SCHED_HAVE_PARENT is not set
+# CONFIG_JULIAN_TIME is not set
+CONFIG_START_YEAR=2011
+CONFIG_START_MONTH=12
+CONFIG_START_DAY=6
+CONFIG_DEV_CONSOLE=y
+# CONFIG_MUTEX_TYPES is not set
+# CONFIG_PRIORITY_INHERITANCE is not set
+# CONFIG_FDCLONE_DISABLE is not set
+# CONFIG_FDCLONE_STDIO is not set
+CONFIG_SDCLONE_DISABLE=y
+CONFIG_SCHED_WAITPID=y
+# CONFIG_SCHED_STARTHOOK is not set
+# CONFIG_SCHED_ATEXIT is not set
+# CONFIG_SCHED_ONEXIT is not set
+CONFIG_USER_ENTRYPOINT="nsh_main"
+CONFIG_DISABLE_OS_API=y
+# CONFIG_DISABLE_POSIX_TIMERS is not set
+# CONFIG_DISABLE_PTHREAD is not set
+# CONFIG_DISABLE_SIGNALS is not set
+# CONFIG_DISABLE_MQUEUE is not set
+# CONFIG_DISABLE_ENVIRON is not set
+
+#
+# Signal Numbers
+#
+CONFIG_SIG_SIGUSR1=1
+CONFIG_SIG_SIGUSR2=2
+CONFIG_SIG_SIGALARM=3
+CONFIG_SIG_SIGCONDTIMEDOUT=16
+CONFIG_SIG_SIGWORK=17
+
+#
+# Sizes of configurable things (0 disables)
+#
+CONFIG_MAX_TASKS=16
+CONFIG_MAX_TASK_ARGS=4
+CONFIG_NPTHREAD_KEYS=4
+CONFIG_NFILE_DESCRIPTORS=8
+CONFIG_NFILE_STREAMS=8
+CONFIG_NAME_MAX=32
+CONFIG_PREALLOC_MQ_MSGS=4
+CONFIG_MQ_MAXMSGSIZE=32
+CONFIG_MAX_WDOGPARMS=2
+CONFIG_PREALLOC_WDOGS=4
+CONFIG_WDOG_INTRESERVE=0
+CONFIG_PREALLOC_TIMERS=4
+
+#
+# Stack and heap information
+#
+CONFIG_IDLETHREAD_STACKSIZE=1024
+CONFIG_USERMAIN_STACKSIZE=2048
+CONFIG_PTHREAD_STACK_MIN=256
+CONFIG_PTHREAD_STACK_DEFAULT=2048
+
+#
+# Device Drivers
+#
+CONFIG_DISABLE_POLL=y
+CONFIG_DEV_NULL=y
+# CONFIG_DEV_ZERO is not set
+# CONFIG_LOOP is not set
+# CONFIG_RAMDISK is not set
+# CONFIG_CAN is not set
+# CONFIG_ARCH_HAVE_PWM_PULSECOUNT is not set
+# CONFIG_PWM is not set
+CONFIG_ARCH_HAVE_I2CRESET=y
+# CONFIG_I2C is not set
+# CONFIG_SPI is not set
+# CONFIG_I2S is not set
+CONFIG_RTC=y
+CONFIG_RTC_DATETIME=y
+CONFIG_RTC_ALARM=y
+# CONFIG_WATCHDOG is not set
+# CONFIG_ANALOG is not set
+# CONFIG_AUDIO_DEVICES is not set
+# CONFIG_VIDEO_DEVICES is not set
+# CONFIG_BCH is not set
+# CONFIG_INPUT is not set
+# CONFIG_LCD is not set
+# CONFIG_MMCSD is not set
+# CONFIG_MTD is not set
+# CONFIG_PIPES is not set
+CONFIG_PM=y
+# CONFIG_POWER is not set
+# CONFIG_SENSORS is not set
+# CONFIG_SERCOMM_CONSOLE is not set
+CONFIG_SERIAL=y
+# CONFIG_DEV_LOWCONSOLE is not set
+# CONFIG_16550_UART is not set
+# CONFIG_ARCH_HAVE_UART is not set
+# CONFIG_ARCH_HAVE_UART0 is not set
+# CONFIG_ARCH_HAVE_UART1 is not set
+# CONFIG_ARCH_HAVE_UART2 is not set
+# CONFIG_ARCH_HAVE_UART3 is not set
+# CONFIG_ARCH_HAVE_UART4 is not set
+# CONFIG_ARCH_HAVE_UART5 is not set
+# CONFIG_ARCH_HAVE_UART6 is not set
+# CONFIG_ARCH_HAVE_UART7 is not set
+# CONFIG_ARCH_HAVE_UART8 is not set
+# CONFIG_ARCH_HAVE_SCI0 is not set
+# CONFIG_ARCH_HAVE_SCI1 is not set
+# CONFIG_ARCH_HAVE_USART0 is not set
+# CONFIG_ARCH_HAVE_USART1 is not set
+CONFIG_ARCH_HAVE_USART2=y
+# CONFIG_ARCH_HAVE_USART3 is not set
+# CONFIG_ARCH_HAVE_USART4 is not set
+# CONFIG_ARCH_HAVE_USART5 is not set
+# CONFIG_ARCH_HAVE_USART6 is not set
+# CONFIG_ARCH_HAVE_USART7 is not set
+# CONFIG_ARCH_HAVE_USART8 is not set
+
+#
+# USART Configuration
+#
+CONFIG_USART2_ISUART=y
+CONFIG_MCU_SERIAL=y
+CONFIG_STANDARD_SERIAL=y
+CONFIG_USART2_SERIAL_CONSOLE=y
+# CONFIG_NO_SERIAL_CONSOLE is not set
+
+#
+# USART2 Configuration
+#
+CONFIG_USART2_RXBUFSIZE=128
+CONFIG_USART2_TXBUFSIZE=128
+CONFIG_USART2_BAUD=115200
+CONFIG_USART2_BITS=8
+CONFIG_USART2_PARITY=0
+CONFIG_USART2_2STOP=0
+# CONFIG_USART2_IFLOWCONTROL is not set
+# CONFIG_USART2_OFLOWCONTROL is not set
+# CONFIG_SERIAL_IFLOWCONTROL is not set
+# CONFIG_SERIAL_OFLOWCONTROL is not set
+# CONFIG_USBDEV is not set
+# CONFIG_USBHOST is not set
+# CONFIG_WIRELESS is not set
+
+#
+# System Logging Device Options
+#
+
+#
+# System Logging
+#
+# CONFIG_RAMLOG is not set
+
+#
+# Networking Support
+#
+# CONFIG_ARCH_HAVE_NET is not set
+# CONFIG_ARCH_HAVE_PHY is not set
+# CONFIG_NET is not set
+
+#
+# File Systems
+#
+
+#
+# File system configuration
+#
+# CONFIG_DISABLE_MOUNTPOINT is not set
+# CONFIG_DISABLE_PSEUDOFS_OPERATIONS is not set
+# CONFIG_FS_READABLE is not set
+# CONFIG_FS_WRITABLE is not set
+# CONFIG_FS_RAMMAP is not set
+# CONFIG_FS_FAT is not set
+# CONFIG_FS_NXFFS is not set
+# CONFIG_FS_ROMFS is not set
+# CONFIG_FS_SMARTFS is not set
+# CONFIG_FS_BINFS is not set
+# CONFIG_FS_PROCFS is not set
+
+#
+# System Logging
+#
+
+# CONFIG_SYSLOG is not set
+
+#
+# Graphics Support
+#
+# CONFIG_NX is not set
+
+#
+# Memory Management
+#
+# CONFIG_MM_SMALL is not set
+CONFIG_MM_REGIONS=2
+# CONFIG_ARCH_HAVE_HEAP2 is not set
+# CONFIG_GRAN is not set
+
+#
+# Audio Support
+#
+# CONFIG_AUDIO is not set
+
+#
+# Binary Formats
+#
+# CONFIG_BINFMT_DISABLE is not set
+# CONFIG_BINFMT_EXEPATH is not set
+# CONFIG_NXFLAT is not set
+# CONFIG_ELF is not set
+CONFIG_BUILTIN=y
+# CONFIG_PIC is not set
+# CONFIG_SYMTAB_ORDEREDBYNAME is not set
+
+#
+# Library Routines
+#
+
+#
+# Standard C Library Options
+#
+CONFIG_STDIO_BUFFER_SIZE=64
+CONFIG_STDIO_LINEBUFFER=y
+CONFIG_NUNGET_CHARS=2
+CONFIG_LIB_HOMEDIR="/"
+# CONFIG_LIBM is not set
+# CONFIG_NOPRINTF_FIELDWIDTH is not set
+# CONFIG_LIBC_FLOATINGPOINT is not set
+CONFIG_LIB_RAND_ORDER=1
+# CONFIG_EOL_IS_CR is not set
+# CONFIG_EOL_IS_LF is not set
+# CONFIG_EOL_IS_BOTH_CRLF is not set
+CONFIG_EOL_IS_EITHER_CRLF=y
+# CONFIG_LIBC_EXECFUNCS is not set
+CONFIG_POSIX_SPAWN_PROXY_STACKSIZE=1024
+CONFIG_TASK_SPAWN_DEFAULT_STACKSIZE=2048
+# CONFIG_LIBC_STRERROR is not set
+# CONFIG_LIBC_PERROR_STDOUT is not set
+CONFIG_ARCH_LOWPUTC=y
+CONFIG_LIB_SENDFILE_BUFSIZE=512
+# CONFIG_ARCH_ROMGETC is not set
+# CONFIG_ARCH_OPTIMIZED_FUNCTIONS is not set
+
+#
+# Non-standard Library Support
+#
+CONFIG_SCHED_WORKQUEUE=y
+CONFIG_SCHED_HPWORK=y
+CONFIG_SCHED_HPWORKPRIORITY=192
+CONFIG_SCHED_HPWORKPERIOD=50000
+CONFIG_SCHED_HPWORKSTACKSIZE=1024
+# CONFIG_SCHED_LPWORK is not set
+# CONFIG_LIB_KBDCODEC is not set
+# CONFIG_LIB_SLCDCODEC is not set
+
+#
+# Basic CXX Support
+#
+# CONFIG_C99_BOOL8 is not set
+CONFIG_HAVE_CXX=y
+CONFIG_HAVE_CXXINITIALIZE=y
+# CONFIG_CXX_NEWLONG is not set
+
+#
+# uClibc++ Standard C++ Library
+#
+# CONFIG_UCLIBCXX is not set
+
+#
+# Application Configuration
+#
+
+#
+# Built-In Applications
+#
+CONFIG_BUILTIN_PROXY_STACKSIZE=1024
+
+#
+# Examples
+#
+# CONFIG_EXAMPLES_BUTTONS is not set
+# CONFIG_EXAMPLES_CAN is not set
+# CONFIG_EXAMPLES_CONFIGDATA is not set
+# CONFIG_EXAMPLES_CXXTEST is not set
+# CONFIG_EXAMPLES_DHCPD is not set
+# CONFIG_EXAMPLES_ELF is not set
+# CONFIG_EXAMPLES_FTPC is not set
+# CONFIG_EXAMPLES_FTPD is not set
+# CONFIG_EXAMPLES_HELLO is not set
+# CONFIG_EXAMPLES_HELLOXX is not set
+# CONFIG_EXAMPLES_JSON is not set
+# CONFIG_EXAMPLES_HIDKBD is not set
+# CONFIG_EXAMPLES_KEYPADTEST is not set
+# CONFIG_EXAMPLES_IGMP is not set
+# CONFIG_EXAMPLES_LCDRW is not set
+# CONFIG_EXAMPLES_MM is not set
+# CONFIG_EXAMPLES_MODBUS is not set
+# CONFIG_EXAMPLES_MOUNT is not set
+# CONFIG_EXAMPLES_NRF24L01TERM is not set
+CONFIG_EXAMPLES_NSH=y
+CONFIG_EXAMPLES_NSH_CXXINITIALIZE=y
+# CONFIG_EXAMPLES_NULL is not set
+# CONFIG_EXAMPLES_NX is not set
+# CONFIG_EXAMPLES_NXTERM is not set
+# CONFIG_EXAMPLES_NXFFS is not set
+# CONFIG_EXAMPLES_NXFLAT is not set
+# CONFIG_EXAMPLES_NXHELLO is not set
+# CONFIG_EXAMPLES_NXIMAGE is not set
+# CONFIG_EXAMPLES_NXLINES is not set
+# CONFIG_EXAMPLES_NXTEXT is not set
+# CONFIG_EXAMPLES_OSTEST is not set
+# CONFIG_EXAMPLES_PASHELLO is not set
+# CONFIG_EXAMPLES_PIPE is not set
+# CONFIG_EXAMPLES_POSIXSPAWN is not set
+# CONFIG_EXAMPLES_QENCODER is not set
+# CONFIG_EXAMPLES_RGMP is not set
+# CONFIG_EXAMPLES_ROMFS is not set
+# CONFIG_EXAMPLES_SENDMAIL is not set
+# CONFIG_EXAMPLES_SERLOOP is not set
+# CONFIG_EXAMPLES_SLCD is not set
+# CONFIG_EXAMPLES_SMART_TEST is not set
+# CONFIG_EXAMPLES_SMART is not set
+# CONFIG_EXAMPLES_TCPECHO is not set
+# CONFIG_EXAMPLES_TELNETD is not set
+# CONFIG_EXAMPLES_THTTPD is not set
+# CONFIG_EXAMPLES_TIFF is not set
+# CONFIG_EXAMPLES_TOUCHSCREEN is not set
+# CONFIG_EXAMPLES_UDP is not set
+# CONFIG_EXAMPLES_WEBSERVER is not set
+# CONFIG_EXAMPLES_USBSERIAL is not set
+# CONFIG_EXAMPLES_USBTERM is not set
+# CONFIG_EXAMPLES_WATCHDOG is not set
+
+#
+# Graphics Support
+#
+# CONFIG_TIFF is not set
+
+#
+# Interpreters
+#
+# CONFIG_INTERPRETERS_FICL is not set
+# CONFIG_INTERPRETERS_PCODE is not set
+
+#
+# Network Utilities
+#
+
+#
+# Networking Utilities
+#
+# CONFIG_NETUTILS_CODECS is not set
+# CONFIG_NETUTILS_DHCPD is not set
+# CONFIG_NETUTILS_FTPC is not set
+# CONFIG_NETUTILS_FTPD is not set
+# CONFIG_NETUTILS_JSON is not set
+# CONFIG_NETUTILS_SMTP is not set
+# CONFIG_NETUTILS_TFTPC is not set
+# CONFIG_NETUTILS_THTTPD is not set
+# CONFIG_NETUTILS_NETLIB is not set
+# CONFIG_NETUTILS_WEBCLIENT is not set
+
+#
+# FreeModBus
+#
+# CONFIG_MODBUS is not set
+
+#
+# NSH Library
+#
+CONFIG_NSH_LIBRARY=y
+CONFIG_NSH_READLINE=y
+# CONFIG_NSH_CLE is not set
+CONFIG_NSH_BUILTIN_APPS=y
+
+#
+# Disable Individual commands
+#
+# CONFIG_NSH_DISABLE_ADDROUTE is not set
+# CONFIG_NSH_DISABLE_CAT is not set
+# CONFIG_NSH_DISABLE_CD is not set
+# CONFIG_NSH_DISABLE_CP is not set
+# CONFIG_NSH_DISABLE_CMP is not set
+# CONFIG_NSH_DISABLE_DD is not set
+# CONFIG_NSH_DISABLE_DF is not set
+# CONFIG_NSH_DISABLE_DELROUTE is not set
+# CONFIG_NSH_DISABLE_ECHO is not set
+# CONFIG_NSH_DISABLE_EXEC is not set
+# CONFIG_NSH_DISABLE_EXIT is not set
+# CONFIG_NSH_DISABLE_FREE is not set
+# CONFIG_NSH_DISABLE_GET is not set
+# CONFIG_NSH_DISABLE_HELP is not set
+# CONFIG_NSH_DISABLE_HEXDUMP is not set
+# CONFIG_NSH_DISABLE_IFCONFIG is not set
+# CONFIG_NSH_DISABLE_KILL is not set
+# CONFIG_NSH_DISABLE_LOSETUP is not set
+# CONFIG_NSH_DISABLE_LS is not set
+# CONFIG_NSH_DISABLE_MB is not set
+# CONFIG_NSH_DISABLE_MKDIR is not set
+# CONFIG_NSH_DISABLE_MKFIFO is not set
+# CONFIG_NSH_DISABLE_MKRD is not set
+# CONFIG_NSH_DISABLE_MH is not set
+# CONFIG_NSH_DISABLE_MOUNT is not set
+# CONFIG_NSH_DISABLE_MW is not set
+# CONFIG_NSH_DISABLE_PS is not set
+# CONFIG_NSH_DISABLE_PUT is not set
+# CONFIG_NSH_DISABLE_PWD is not set
+# CONFIG_NSH_DISABLE_RM is not set
+# CONFIG_NSH_DISABLE_RMDIR is not set
+# CONFIG_NSH_DISABLE_SET is not set
+# CONFIG_NSH_DISABLE_SH is not set
+# CONFIG_NSH_DISABLE_SLEEP is not set
+# CONFIG_NSH_DISABLE_TEST is not set
+# CONFIG_NSH_DISABLE_UMOUNT is not set
+# CONFIG_NSH_DISABLE_UNSET is not set
+# CONFIG_NSH_DISABLE_USLEEP is not set
+# CONFIG_NSH_DISABLE_WGET is not set
+# CONFIG_NSH_DISABLE_XD is not set
+
+#
+# Configure Command Options
+#
+CONFIG_NSH_CMDOPT_DF_H=y
+CONFIG_NSH_CODECS_BUFSIZE=128
+CONFIG_NSH_CMDOPT_HEXDUMP=y
+CONFIG_NSH_FILEIOSIZE=512
+CONFIG_NSH_LINELEN=64
+# CONFIG_NSH_DISABLE_SEMICOLON is not set
+CONFIG_NSH_CMDPARMS=y
+CONFIG_NSH_TMPDIR="/tmp"
+CONFIG_NSH_MAXARGUMENTS=6
+CONFIG_NSH_ARGCAT=y
+CONFIG_NSH_NESTDEPTH=3
+# CONFIG_NSH_DISABLESCRIPT is not set
+# CONFIG_NSH_DISABLE_ITEF is not set
+# CONFIG_NSH_DISABLE_LOOPS is not set
+# CONFIG_NSH_DISABLEBG is not set
+CONFIG_NSH_CONSOLE=y
+
+#
+# USB Trace Support
+#
+# CONFIG_NSH_ALTCONDEV is not set
+# CONFIG_NSH_ARCHINIT is not set
+
+#
+# NxWidgets/NxWM
+#
+
+#
+# Platform-specific Support
+#
+# CONFIG_PLATFORM_CONFIGDATA is not set
+
+#
+# System Libraries and NSH Add-Ons
+#
+
+#
+# USB CDC/ACM Device Commands
+#
+
+#
+# USB Composite Device Commands
+#
+
+#
+# Custom Free Memory Command
+#
+# CONFIG_SYSTEM_FREE is not set
+
+#
+# I2C tool
+#
+
+#
+# INI File Parser
+#
+# CONFIG_SYSTEM_INIFILE is not set
+
+#
+# FLASH Program Installation
+#
+# CONFIG_SYSTEM_INSTALL is not set
+
+#
+# FLASH Erase-all Command
+#
+
+#
+# NxPlayer media player library / command Line
+#
+# CONFIG_SYSTEM_NXPLAYER is not set
+
+#
+# RAM test
+#
+# CONFIG_SYSTEM_RAMTEST is not set
+
+#
+# readline()
+#
+CONFIG_SYSTEM_READLINE=y
+CONFIG_READLINE_ECHO=y
+
+#
+# Power Off
+#
+# CONFIG_SYSTEM_POWEROFF is not set
+
+#
+# RAMTRON
+#
+# CONFIG_SYSTEM_RAMTRON is not set
+
+#
+# SD Card
+#
+# CONFIG_SYSTEM_SDCARD is not set
+
+#
+# Sysinfo
+#
+# CONFIG_SYSTEM_SYSINFO is not set
+
+#
+# USB Monitor
+#
+
+#
+# EMACS-like Command Line Editor
+#
+# CONFIG_SYSTEM_CLE is not set
+
+#
+# VI Work-Alike Editor
+#
+# CONFIG_SYSTEM_VI is not set
+
+#
+# Stack Monitor
+#
+
+#
+# USB Mass Storage Device Commands
+#
+
+#
+# Zmodem Commands
+#
+# CONFIG_SYSTEM_ZMODEM is not set
diff --git a/nuttx/configs/px4fmu-v2/pm/setenv.sh b/nuttx/configs/px4fmu-v2/pm/setenv.sh
new file mode 100644
index 000000000..7874baa78
--- /dev/null
+++ b/nuttx/configs/px4fmu-v2/pm/setenv.sh
@@ -0,0 +1,76 @@
+#!/bin/bash
+# configs/stm32f4discovery/pm/setenv.sh
+#
+#   Copyright (C) 2012 Gregory Nutt. All rights reserved.
+#   Author: Gregory Nutt <gnutt@nuttx.org>
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions
+# are met:
+#
+# 1. Redistributions of source code must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+# 2. Redistributions in binary form must reproduce the above copyright
+#    notice, this list of conditions and the following disclaimer in
+#    the documentation and/or other materials provided with the
+#    distribution.
+# 3. Neither the name NuttX nor the names of its contributors may be
+#    used to endorse or promote products derived from this software
+#    without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+#
+
+if [ "$_" = "$0" ] ; then
+  echo "You must source this script, not run it!" 1>&2
+  exit 1
+fi
+
+WD=`pwd`
+if [ ! -x "setenv.sh" ]; then
+  echo "This script must be executed from the top-level NuttX build directory"
+  exit 1
+fi
+
+if [ -z "${PATH_ORIG}" ]; then
+  export PATH_ORIG="${PATH}"
+fi
+
+# This is the Cygwin path to the location where I installed the RIDE
+# toolchain under windows.  You will also have to edit this if you install
+# the RIDE toolchain in any other location
+#export TOOLCHAIN_BIN="/cygdrive/c/Program Files (x86)/Raisonance/Ride/arm-gcc/bin"
+
+# This is the Cygwin path to the location where I installed the CodeSourcery
+# toolchain under windows.  You will also have to edit this if you install
+# the CodeSourcery toolchain in any other location
+export TOOLCHAIN_BIN="/cygdrive/c/Program Files (x86)/CodeSourcery/Sourcery G++ Lite/bin"
+#export TOOLCHAIN_BIN="/cygdrive/c/Users/MyName/MentorGraphics/Sourcery_CodeBench_Lite_for_ARM_EABI/bin"
+
+# These are the Cygwin paths to the locations where I installed the Atollic
+# toolchain under windows.  You will also have to edit this if you install
+# the Atollic toolchain in any other location.  /usr/bin is added before
+# the Atollic bin path because there is are binaries named gcc.exe and g++.exe
+# at those locations as well.
+#export TOOLCHAIN_BIN="/usr/bin:/cygdrive/c/Program Files (x86)/Atollic/TrueSTUDIO for ARM Pro 2.3.0/ARMTools/bin"
+#export TOOLCHAIN_BIN="/usr/bin:/cygdrive/c/Program Files (x86)/Atollic/TrueSTUDIO for STMicroelectronics STM32 Lite 2.3.0/ARMTools/bin"
+
+# This is the Cygwin path to the location where I build the buildroot
+# toolchain.
+#export TOOLCHAIN_BIN="${WD}/../misc/buildroot/build_arm_nofpu/staging_dir/bin"
+
+# Add the path to the toolchain to the PATH varialble
+export PATH="${TOOLCHAIN_BIN}:/sbin:/usr/sbin:${PATH_ORIG}"
+
+echo "PATH : ${PATH}"
diff --git a/nuttx/configs/px4fmu-v2/posix_spawn/Make.defs b/nuttx/configs/px4fmu-v2/posix_spawn/Make.defs
new file mode 100644
index 000000000..4b6102e41
--- /dev/null
+++ b/nuttx/configs/px4fmu-v2/posix_spawn/Make.defs
@@ -0,0 +1,131 @@
+############################################################################
+# configs/stm32f4discovery/posix_spawn/Make.defs
+#
+#   Copyright (C) 2011-2012 Gregory Nutt. All rights reserved.
+#   Author: Gregory Nutt <gnutt@nuttx.org>
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions
+# are met:
+#
+# 1. Redistributions of source code must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+# 2. Redistributions in binary form must reproduce the above copyright
+#    notice, this list of conditions and the following disclaimer in
+#    the documentation and/or other materials provided with the
+#    distribution.
+# 3. Neither the name NuttX nor the names of its contributors may be
+#    used to endorse or promote products derived from this software
+#    without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+#
+############################################################################
+
+include ${TOPDIR}/.config
+include ${TOPDIR}/tools/Config.mk
+include ${TOPDIR}/arch/arm/src/armv7-m/Toolchain.defs
+
+LDSCRIPT = ld.script
+
+ifeq ($(WINTOOL),y)
+  # Windows-native toolchains
+  DIRLINK = $(TOPDIR)/tools/copydir.sh
+  DIRUNLINK = $(TOPDIR)/tools/unlink.sh
+  MKDEP = $(TOPDIR)/tools/mknulldeps.sh
+  ARCHINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}"
+  ARCHXXINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}" -isystem "${shell cygpath -w $(TOPDIR)/include/cxx}"
+  ARCHSCRIPT = -T "${shell cygpath -w $(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/scripts/$(LDSCRIPT)}"
+else
+  # Linux/Cygwin-native toolchain
+  MKDEP = $(TOPDIR)/tools/mkdeps.sh
+  ARCHINCLUDES = -I. -isystem $(TOPDIR)/include
+  ARCHXXINCLUDES = -I. -isystem $(TOPDIR)/include -isystem $(TOPDIR)/include/cxx
+  ARCHSCRIPT = -T$(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/scripts/$(LDSCRIPT)
+endif
+
+CC = $(CROSSDEV)gcc
+CXX = $(CROSSDEV)g++
+CPP = $(CROSSDEV)gcc -E
+LD = $(CROSSDEV)ld
+AR = $(ARCROSSDEV)ar rcs
+NM = $(ARCROSSDEV)nm
+OBJCOPY = $(CROSSDEV)objcopy
+OBJDUMP = $(CROSSDEV)objdump
+
+ARCHCCVERSION = ${shell $(CC) -v 2>&1 | sed -n '/^gcc version/p' | sed -e 's/^gcc version \([0-9\.]\)/\1/g' -e 's/[-\ ].*//g' -e '1q'}
+ARCHCCMAJOR = ${shell echo $(ARCHCCVERSION) | cut -d'.' -f1}
+
+ifeq ($(CONFIG_DEBUG_SYMBOLS),y)
+  ARCHOPTIMIZATION = -g
+endif
+
+ifneq ($(CONFIG_DEBUG_NOOPT),y)
+  ARCHOPTIMIZATION += $(MAXOPTIMIZATION) -fno-strict-aliasing -fno-strength-reduce -fomit-frame-pointer
+endif
+
+ARCHCFLAGS = -fno-builtin
+ARCHCXXFLAGS = -fno-builtin -fno-exceptions -fno-rtti
+ARCHWARNINGS = -Wall -Wstrict-prototypes -Wshadow
+ARCHWARNINGSXX = -Wall -Wshadow
+ARCHDEFINES =
+ARCHPICFLAGS = -fpic -msingle-pic-base -mpic-register=r10
+
+CFLAGS = $(ARCHCFLAGS) $(ARCHWARNINGS) $(ARCHOPTIMIZATION) $(ARCHCPUFLAGS) $(ARCHINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES) -pipe
+CPICFLAGS = $(ARCHPICFLAGS) $(CFLAGS)
+CXXFLAGS = $(ARCHCXXFLAGS) $(ARCHWARNINGSXX) $(ARCHOPTIMIZATION) $(ARCHCPUFLAGS) $(ARCHXXINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES) -pipe
+CXXPICFLAGS = $(ARCHPICFLAGS) $(CXXFLAGS)
+CPPFLAGS = $(ARCHINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES)
+AFLAGS = $(CFLAGS) -D__ASSEMBLY__
+
+# NXFLAT module definitions
+
+NXFLATLDFLAGS1 = -r -d -warn-common
+NXFLATLDFLAGS2 = $(NXFLATLDFLAGS1) -T$(TOPDIR)/binfmt/libnxflat/gnu-nxflat-pcrel.ld -no-check-sections
+LDNXFLATFLAGS = -e main -s 2048
+
+# ELF module definitions
+
+CELFFLAGS = $(CFLAGS) -mlong-calls # --target1-abs
+CXXELFFLAGS = $(CXXFLAGS) -mlong-calls # --target1-abs
+
+LDELFFLAGS = -r -e main
+ifeq ($(WINTOOL),y)
+  LDELFFLAGS += -T "${shell cygpath -w $(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/scripts/gnu-elf.ld}"
+else
+  LDELFFLAGS += -T $(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/scripts/gnu-elf.ld
+endif
+
+# File extensions
+
+OBJEXT = .o
+LIBEXT = .a
+EXEEXT =
+
+# Linker flags
+
+ifneq ($(CROSSDEV),arm-nuttx-elf-)
+  LDFLAGS += -nostartfiles -nodefaultlibs
+endif
+ifeq ($(CONFIG_DEBUG_SYMBOLS),y)
+  LDFLAGS += -g
+endif
+
+# Host tools
+
+HOSTCC = gcc
+HOSTINCLUDES = -I.
+HOSTCFLAGS = -Wall -Wstrict-prototypes -Wshadow -g -pipe
+HOSTLDFLAGS =
+
diff --git a/nuttx/configs/px4fmu-v2/posix_spawn/defconfig b/nuttx/configs/px4fmu-v2/posix_spawn/defconfig
new file mode 100644
index 000000000..3d23412ed
--- /dev/null
+++ b/nuttx/configs/px4fmu-v2/posix_spawn/defconfig
@@ -0,0 +1,852 @@
+#
+# Automatically generated file; DO NOT EDIT.
+# Nuttx/ Configuration
+#
+
+#
+# Build Setup
+#
+# CONFIG_EXPERIMENTAL is not set
+# CONFIG_DEFAULT_SMALL is not set
+# CONFIG_HOST_LINUX is not set
+# CONFIG_HOST_OSX is not set
+CONFIG_HOST_WINDOWS=y
+# CONFIG_HOST_OTHER is not set
+# CONFIG_WINDOWS_NATIVE is not set
+CONFIG_WINDOWS_CYGWIN=y
+# CONFIG_WINDOWS_MSYS is not set
+# CONFIG_WINDOWS_OTHER is not set
+
+#
+# Build Configuration
+#
+# CONFIG_APPS_DIR="../apps"
+# CONFIG_BUILD_2PASS is not set
+
+#
+# Binary Output Formats
+#
+# CONFIG_RRLOAD_BINARY is not set
+CONFIG_INTELHEX_BINARY=y
+# CONFIG_MOTOROLA_SREC is not set
+# CONFIG_RAW_BINARY is not set
+
+#
+# Customize Header Files
+#
+# CONFIG_ARCH_STDINT_H is not set
+# CONFIG_ARCH_STDBOOL_H is not set
+# CONFIG_ARCH_MATH_H is not set
+# CONFIG_ARCH_FLOAT_H is not set
+# CONFIG_ARCH_STDARG_H is not set
+
+#
+# Debug Options
+#
+# CONFIG_DEBUG is not set
+CONFIG_ARCH_HAVE_STACKCHECK=y
+CONFIG_ARCH_HAVE_HEAPCHECK=y
+# CONFIG_DEBUG_SYMBOLS is not set
+CONFIG_ARCH_HAVE_CUSTOMOPT=y
+# CONFIG_DEBUG_NOOPT is not set
+# CONFIG_DEBUG_CUSTOMOPT is not set
+CONFIG_DEBUG_FULLOPT=y
+
+#
+# System Type
+#
+CONFIG_ARCH_ARM=y
+# CONFIG_ARCH_AVR is not set
+# CONFIG_ARCH_HC is not set
+# CONFIG_ARCH_MIPS is not set
+# CONFIG_ARCH_RGMP is not set
+# CONFIG_ARCH_SH is not set
+# CONFIG_ARCH_SIM is not set
+# CONFIG_ARCH_X86 is not set
+# CONFIG_ARCH_Z16 is not set
+# CONFIG_ARCH_Z80 is not set
+CONFIG_ARCH="arm"
+
+#
+# ARM Options
+#
+# CONFIG_ARCH_CHIP_A1X is not set
+# CONFIG_ARCH_CHIP_C5471 is not set
+# CONFIG_ARCH_CHIP_CALYPSO is not set
+# CONFIG_ARCH_CHIP_DM320 is not set
+# CONFIG_ARCH_CHIP_IMX is not set
+# CONFIG_ARCH_CHIP_KINETIS is not set
+# CONFIG_ARCH_CHIP_KL is not set
+# CONFIG_ARCH_CHIP_LM is not set
+# CONFIG_ARCH_CHIP_LPC17XX is not set
+# CONFIG_ARCH_CHIP_LPC214X is not set
+# CONFIG_ARCH_CHIP_LPC2378 is not set
+# CONFIG_ARCH_CHIP_LPC31XX is not set
+# CONFIG_ARCH_CHIP_LPC43XX is not set
+# CONFIG_ARCH_CHIP_NUC1XX is not set
+# CONFIG_ARCH_CHIP_SAMA5 is not set
+# CONFIG_ARCH_CHIP_SAMD is not set
+# CONFIG_ARCH_CHIP_SAM34 is not set
+CONFIG_ARCH_CHIP_STM32=y
+# CONFIG_ARCH_CHIP_STR71X is not set
+# CONFIG_ARCH_ARM7TDMI is not set
+# CONFIG_ARCH_ARM926EJS is not set
+# CONFIG_ARCH_ARM920T is not set
+# CONFIG_ARCH_CORTEXM0 is not set
+# CONFIG_ARCH_CORTEXM3 is not set
+CONFIG_ARCH_CORTEXM4=y
+# CONFIG_ARCH_CORTEXA5 is not set
+# CONFIG_ARCH_CORTEXA8 is not set
+CONFIG_ARCH_FAMILY="armv7-m"
+CONFIG_ARCH_CHIP="stm32"
+# CONFIG_ARMV7M_USEBASEPRI is not set
+CONFIG_ARCH_HAVE_CMNVECTOR=y
+# CONFIG_ARMV7M_CMNVECTOR is not set
+CONFIG_ARCH_HAVE_FPU=y
+# CONFIG_ARCH_FPU is not set
+CONFIG_ARCH_HAVE_MPU=y
+# CONFIG_ARMV7M_MPU is not set
+
+#
+# ARMV7M Configuration Options
+#
+# CONFIG_ARMV7M_TOOLCHAIN_ATOLLIC is not set
+# CONFIG_ARMV7M_TOOLCHAIN_BUILDROOT is not set
+# CONFIG_ARMV7M_TOOLCHAIN_CODEREDW is not set
+CONFIG_ARMV7M_TOOLCHAIN_CODESOURCERYW=y
+# CONFIG_ARMV7M_TOOLCHAIN_DEVKITARM is not set
+# CONFIG_ARMV7M_TOOLCHAIN_GNU_EABIL is not set
+# CONFIG_ARMV7M_TOOLCHAIN_GNU_EABIW is not set
+# CONFIG_ARMV7M_TOOLCHAIN_RAISONANCE is not set
+# CONFIG_SERIAL_TERMIOS is not set
+
+#
+# STM32 Configuration Options
+#
+# CONFIG_ARCH_CHIP_STM32L151C6 is not set
+# CONFIG_ARCH_CHIP_STM32L151C8 is not set
+# CONFIG_ARCH_CHIP_STM32L151CB is not set
+# CONFIG_ARCH_CHIP_STM32L151R6 is not set
+# CONFIG_ARCH_CHIP_STM32L151R8 is not set
+# CONFIG_ARCH_CHIP_STM32L151RB is not set
+# CONFIG_ARCH_CHIP_STM32L151V6 is not set
+# CONFIG_ARCH_CHIP_STM32L151V8 is not set
+# CONFIG_ARCH_CHIP_STM32L151VB is not set
+# CONFIG_ARCH_CHIP_STM32L152C6 is not set
+# CONFIG_ARCH_CHIP_STM32L152C8 is not set
+# CONFIG_ARCH_CHIP_STM32L152CB is not set
+# CONFIG_ARCH_CHIP_STM32L152R6 is not set
+# CONFIG_ARCH_CHIP_STM32L152R8 is not set
+# CONFIG_ARCH_CHIP_STM32L152RB is not set
+# CONFIG_ARCH_CHIP_STM32L152V6 is not set
+# CONFIG_ARCH_CHIP_STM32L152V8 is not set
+# CONFIG_ARCH_CHIP_STM32L152VB is not set
+# CONFIG_ARCH_CHIP_STM32F100C8 is not set
+# CONFIG_ARCH_CHIP_STM32F100CB is not set
+# CONFIG_ARCH_CHIP_STM32F100R8 is not set
+# CONFIG_ARCH_CHIP_STM32F100RB is not set
+# CONFIG_ARCH_CHIP_STM32F100RC is not set
+# CONFIG_ARCH_CHIP_STM32F100RD is not set
+# CONFIG_ARCH_CHIP_STM32F100RE is not set
+# CONFIG_ARCH_CHIP_STM32F100V8 is not set
+# CONFIG_ARCH_CHIP_STM32F100VB is not set
+# CONFIG_ARCH_CHIP_STM32F100VC is not set
+# CONFIG_ARCH_CHIP_STM32F100VD is not set
+# CONFIG_ARCH_CHIP_STM32F100VE is not set
+# CONFIG_ARCH_CHIP_STM32F103C4 is not set
+# CONFIG_ARCH_CHIP_STM32F103C8 is not set
+# CONFIG_ARCH_CHIP_STM32F103T8 is not set
+# CONFIG_ARCH_CHIP_STM32F103TB is not set
+# CONFIG_ARCH_CHIP_STM32F103CB is not set
+# CONFIG_ARCH_CHIP_STM32F103R8 is not set
+# CONFIG_ARCH_CHIP_STM32F103RB is not set
+# CONFIG_ARCH_CHIP_STM32F103V8 is not set
+# CONFIG_ARCH_CHIP_STM32F103VB is not set
+# CONFIG_ARCH_CHIP_STM32F103RE is not set
+# CONFIG_ARCH_CHIP_STM32F103VC is not set
+# CONFIG_ARCH_CHIP_STM32F103VE is not set
+# CONFIG_ARCH_CHIP_STM32F103ZE is not set
+# CONFIG_ARCH_CHIP_STM32F105VB is not set
+# CONFIG_ARCH_CHIP_STM32F107VC is not set
+# CONFIG_ARCH_CHIP_STM32F207IG is not set
+# CONFIG_ARCH_CHIP_STM32F207ZE is not set
+# CONFIG_ARCH_CHIP_STM32F302CB is not set
+# CONFIG_ARCH_CHIP_STM32F302CC is not set
+# CONFIG_ARCH_CHIP_STM32F302RB is not set
+# CONFIG_ARCH_CHIP_STM32F302RC is not set
+# CONFIG_ARCH_CHIP_STM32F302VB is not set
+# CONFIG_ARCH_CHIP_STM32F302VC is not set
+# CONFIG_ARCH_CHIP_STM32F303CB is not set
+# CONFIG_ARCH_CHIP_STM32F303CC is not set
+# CONFIG_ARCH_CHIP_STM32F303RB is not set
+# CONFIG_ARCH_CHIP_STM32F303RC is not set
+# CONFIG_ARCH_CHIP_STM32F303VB is not set
+# CONFIG_ARCH_CHIP_STM32F303VC is not set
+# CONFIG_ARCH_CHIP_STM32F405RG is not set
+# CONFIG_ARCH_CHIP_STM32F405VG is not set
+# CONFIG_ARCH_CHIP_STM32F405ZG is not set
+# CONFIG_ARCH_CHIP_STM32F407VE is not set
+CONFIG_ARCH_CHIP_STM32F407VG=y
+# CONFIG_ARCH_CHIP_STM32F407ZE is not set
+# CONFIG_ARCH_CHIP_STM32F407ZG is not set
+# CONFIG_ARCH_CHIP_STM32F407IE is not set
+# CONFIG_ARCH_CHIP_STM32F407IG is not set
+# CONFIG_ARCH_CHIP_STM32F427V is not set
+# CONFIG_ARCH_CHIP_STM32F427Z is not set
+# CONFIG_ARCH_CHIP_STM32F427I is not set
+# CONFIG_ARCH_CHIP_STM32F429V is not set
+# CONFIG_ARCH_CHIP_STM32F429Z is not set
+# CONFIG_ARCH_CHIP_STM32F429I is not set
+# CONFIG_ARCH_CHIP_STM32F429B is not set
+# CONFIG_ARCH_CHIP_STM32F429N is not set
+# CONFIG_STM32_STM32L15XX is not set
+# CONFIG_STM32_ENERGYLITE is not set
+# CONFIG_STM32_STM32F10XX is not set
+# CONFIG_STM32_VALUELINE is not set
+# CONFIG_STM32_CONNECTIVITYLINE is not set
+# CONFIG_STM32_PERFORMANCELINE is not set
+# CONFIG_STM32_HIGHDENSITY is not set
+# CONFIG_STM32_MEDIUMDENSITY is not set
+# CONFIG_STM32_LOWDENSITY is not set
+# CONFIG_STM32_STM32F20XX is not set
+# CONFIG_STM32_STM32F30XX is not set
+CONFIG_STM32_STM32F40XX=y
+# CONFIG_STM32_DFU is not set
+
+#
+# STM32 Peripheral Support
+#
+# CONFIG_STM32_HAVE_USBDEV is not set
+CONFIG_STM32_HAVE_OTGFS=y
+# CONFIG_STM32_ADC1 is not set
+# CONFIG_STM32_ADC2 is not set
+# CONFIG_STM32_ADC3 is not set
+# CONFIG_STM32_BKPSRAM is not set
+# CONFIG_STM32_CAN1 is not set
+# CONFIG_STM32_CAN2 is not set
+# CONFIG_STM32_CCMDATARAM is not set
+# CONFIG_STM32_CRC is not set
+# CONFIG_STM32_CRYP is not set
+# CONFIG_STM32_DMA1 is not set
+# CONFIG_STM32_DMA2 is not set
+# CONFIG_STM32_DAC1 is not set
+# CONFIG_STM32_DAC2 is not set
+# CONFIG_STM32_DCMI is not set
+# CONFIG_STM32_ETHMAC is not set
+# CONFIG_STM32_FSMC is not set
+# CONFIG_STM32_HASH is not set
+# CONFIG_STM32_I2C1 is not set
+# CONFIG_STM32_I2C2 is not set
+# CONFIG_STM32_I2C3 is not set
+# CONFIG_STM32_OTGFS is not set
+# CONFIG_STM32_OTGHS is not set
+# CONFIG_STM32_PWR is not set
+# CONFIG_STM32_RNG is not set
+# CONFIG_STM32_SDIO is not set
+# CONFIG_STM32_SPI1 is not set
+# CONFIG_STM32_SPI2 is not set
+# CONFIG_STM32_SPI3 is not set
+CONFIG_STM32_SYSCFG=y
+# CONFIG_STM32_TIM1 is not set
+# CONFIG_STM32_TIM2 is not set
+# CONFIG_STM32_TIM3 is not set
+# CONFIG_STM32_TIM4 is not set
+# CONFIG_STM32_TIM5 is not set
+# CONFIG_STM32_TIM6 is not set
+# CONFIG_STM32_TIM7 is not set
+# CONFIG_STM32_TIM8 is not set
+# CONFIG_STM32_TIM9 is not set
+# CONFIG_STM32_TIM10 is not set
+# CONFIG_STM32_TIM11 is not set
+# CONFIG_STM32_TIM12 is not set
+# CONFIG_STM32_TIM13 is not set
+# CONFIG_STM32_TIM14 is not set
+# CONFIG_STM32_USART1 is not set
+CONFIG_STM32_USART2=y
+# CONFIG_STM32_USART3 is not set
+# CONFIG_STM32_UART4 is not set
+# CONFIG_STM32_UART5 is not set
+# CONFIG_STM32_USART6 is not set
+# CONFIG_STM32_IWDG is not set
+# CONFIG_STM32_WWDG is not set
+
+#
+# Alternate Pin Mapping
+#
+# CONFIG_STM32_FLASH_PREFETCH is not set
+# CONFIG_STM32_JTAG_DISABLE is not set
+# CONFIG_STM32_JTAG_FULL_ENABLE is not set
+# CONFIG_STM32_JTAG_NOJNTRST_ENABLE is not set
+CONFIG_STM32_JTAG_SW_ENABLE=y
+# CONFIG_STM32_DISABLE_IDLE_SLEEP_DURING_DEBUG is not set
+# CONFIG_STM32_FORCEPOWER is not set
+# CONFIG_ARCH_BOARD_STM32_CUSTOM_CLOCKCONFIG is not set
+CONFIG_STM32_CCMEXCLUDE=y
+CONFIG_STM32_USART=y
+
+#
+# U[S]ART Configuration
+#
+# CONFIG_USART2_RS485 is not set
+# CONFIG_SERIAL_DISABLE_REORDERING is not set
+# CONFIG_STM32_USART_SINGLEWIRE is not set
+
+#
+# USB Host Configuration
+#
+
+#
+# USB Device Configuration
+#
+
+#
+# Architecture Options
+#
+# CONFIG_ARCH_NOINTC is not set
+# CONFIG_ARCH_VECNOTIRQ is not set
+# CONFIG_ARCH_DMA is not set
+CONFIG_ARCH_HAVE_IRQPRIO=y
+# CONFIG_ARCH_ADDRENV is not set
+CONFIG_ARCH_HAVE_VFORK=y
+# CONFIG_ARCH_HAVE_MMU is not set
+# CONFIG_ARCH_NAND_HWECC is not set
+# CONFIG_ARCH_IRQPRIO is not set
+CONFIG_ARCH_STACKDUMP=y
+# CONFIG_ENDIAN_BIG is not set
+# CONFIG_ARCH_IDLE_CUSTOM is not set
+# CONFIG_ARCH_HAVE_RAMFUNCS is not set
+CONFIG_ARCH_HAVE_RAMVECTORS=y
+# CONFIG_ARCH_RAMVECTORS is not set
+
+#
+# Board Settings
+#
+CONFIG_BOARD_LOOPSPERMSEC=16717
+# CONFIG_ARCH_CALIBRATION is not set
+
+#
+# Interrupt options
+#
+CONFIG_ARCH_HAVE_INTERRUPTSTACK=y
+CONFIG_ARCH_INTERRUPTSTACK=0
+CONFIG_ARCH_HAVE_HIPRI_INTERRUPT=y
+# CONFIG_ARCH_HIPRI_INTERRUPT is not set
+
+#
+# Boot options
+#
+# CONFIG_BOOT_RUNFROMEXTSRAM is not set
+CONFIG_BOOT_RUNFROMFLASH=y
+# CONFIG_BOOT_RUNFROMISRAM is not set
+# CONFIG_BOOT_RUNFROMSDRAM is not set
+# CONFIG_BOOT_COPYTORAM is not set
+
+#
+# Boot Memory Configuration
+#
+CONFIG_RAM_START=0x20000000
+CONFIG_RAM_SIZE=114688
+# CONFIG_ARCH_HAVE_SDRAM is not set
+
+#
+# Board Selection
+#
+CONFIG_ARCH_BOARD_STM32F4_DISCOVERY=y
+# CONFIG_ARCH_BOARD_MIKROE_STM32F4 is not set
+# CONFIG_ARCH_BOARD_CUSTOM is not set
+CONFIG_ARCH_BOARD="stm32f4discovery"
+
+#
+# Common Board Options
+#
+CONFIG_ARCH_HAVE_LEDS=y
+CONFIG_ARCH_LEDS=y
+CONFIG_ARCH_HAVE_BUTTONS=y
+# CONFIG_ARCH_BUTTONS is not set
+CONFIG_ARCH_HAVE_IRQBUTTONS=y
+
+#
+# Board-Specific Options
+#
+
+#
+# RTOS Features
+#
+# CONFIG_BOARD_INITIALIZE is not set
+CONFIG_USEC_PER_TICK=10000
+# CONFIG_SYSTEM_TIME64 is not set
+CONFIG_RR_INTERVAL=200
+# CONFIG_SCHED_CPULOAD is not set
+# CONFIG_SCHED_INSTRUMENTATION is not set
+CONFIG_TASK_NAME_SIZE=0
+# CONFIG_SCHED_HAVE_PARENT is not set
+# CONFIG_JULIAN_TIME is not set
+CONFIG_START_YEAR=2012
+CONFIG_START_MONTH=10
+CONFIG_START_DAY=26
+CONFIG_DEV_CONSOLE=y
+# CONFIG_MUTEX_TYPES is not set
+# CONFIG_PRIORITY_INHERITANCE is not set
+# CONFIG_FDCLONE_DISABLE is not set
+# CONFIG_FDCLONE_STDIO is not set
+CONFIG_SDCLONE_DISABLE=y
+# CONFIG_SCHED_WAITPID is not set
+CONFIG_SCHED_STARTHOOK=y
+# CONFIG_SCHED_ATEXIT is not set
+# CONFIG_SCHED_ONEXIT is not set
+CONFIG_USER_ENTRYPOINT="spawn_main"
+CONFIG_DISABLE_OS_API=y
+# CONFIG_DISABLE_POSIX_TIMERS is not set
+# CONFIG_DISABLE_PTHREAD is not set
+# CONFIG_DISABLE_SIGNALS is not set
+# CONFIG_DISABLE_MQUEUE is not set
+# CONFIG_DISABLE_ENVIRON is not set
+
+#
+# Signal Numbers
+#
+CONFIG_SIG_SIGUSR1=1
+CONFIG_SIG_SIGUSR2=2
+CONFIG_SIG_SIGALARM=3
+CONFIG_SIG_SIGCONDTIMEDOUT=16
+
+#
+# Sizes of configurable things (0 disables)
+#
+CONFIG_MAX_TASKS=16
+CONFIG_MAX_TASK_ARGS=4
+CONFIG_NPTHREAD_KEYS=4
+CONFIG_NFILE_DESCRIPTORS=8
+CONFIG_NFILE_STREAMS=8
+CONFIG_NAME_MAX=32
+CONFIG_PREALLOC_MQ_MSGS=4
+CONFIG_MQ_MAXMSGSIZE=32
+CONFIG_MAX_WDOGPARMS=2
+CONFIG_PREALLOC_WDOGS=4
+CONFIG_WDOG_INTRESERVE=0
+CONFIG_PREALLOC_TIMERS=4
+
+#
+# Stack and heap information
+#
+CONFIG_IDLETHREAD_STACKSIZE=1024
+CONFIG_USERMAIN_STACKSIZE=2048
+CONFIG_PTHREAD_STACK_MIN=256
+CONFIG_PTHREAD_STACK_DEFAULT=2048
+
+#
+# Device Drivers
+#
+# CONFIG_DISABLE_POLL is not set
+CONFIG_DEV_NULL=y
+# CONFIG_DEV_ZERO is not set
+# CONFIG_LOOP is not set
+# CONFIG_RAMDISK is not set
+# CONFIG_CAN is not set
+# CONFIG_ARCH_HAVE_PWM_PULSECOUNT is not set
+# CONFIG_PWM is not set
+CONFIG_ARCH_HAVE_I2CRESET=y
+# CONFIG_I2C is not set
+# CONFIG_SPI is not set
+# CONFIG_I2S is not set
+# CONFIG_RTC is not set
+# CONFIG_WATCHDOG is not set
+# CONFIG_ANALOG is not set
+# CONFIG_AUDIO_DEVICES is not set
+# CONFIG_VIDEO_DEVICES is not set
+# CONFIG_BCH is not set
+# CONFIG_INPUT is not set
+# CONFIG_LCD is not set
+# CONFIG_MMCSD is not set
+# CONFIG_MTD is not set
+# CONFIG_PIPES is not set
+# CONFIG_PM is not set
+# CONFIG_POWER is not set
+# CONFIG_SENSORS is not set
+# CONFIG_SERCOMM_CONSOLE is not set
+CONFIG_SERIAL=y
+CONFIG_DEV_LOWCONSOLE=y
+# CONFIG_16550_UART is not set
+# CONFIG_ARCH_HAVE_UART is not set
+# CONFIG_ARCH_HAVE_UART0 is not set
+# CONFIG_ARCH_HAVE_UART1 is not set
+# CONFIG_ARCH_HAVE_UART2 is not set
+# CONFIG_ARCH_HAVE_UART3 is not set
+# CONFIG_ARCH_HAVE_UART4 is not set
+# CONFIG_ARCH_HAVE_UART5 is not set
+# CONFIG_ARCH_HAVE_UART6 is not set
+# CONFIG_ARCH_HAVE_UART7 is not set
+# CONFIG_ARCH_HAVE_UART8 is not set
+# CONFIG_ARCH_HAVE_SCI0 is not set
+# CONFIG_ARCH_HAVE_SCI1 is not set
+# CONFIG_ARCH_HAVE_USART0 is not set
+# CONFIG_ARCH_HAVE_USART1 is not set
+CONFIG_ARCH_HAVE_USART2=y
+# CONFIG_ARCH_HAVE_USART3 is not set
+# CONFIG_ARCH_HAVE_USART4 is not set
+# CONFIG_ARCH_HAVE_USART5 is not set
+# CONFIG_ARCH_HAVE_USART6 is not set
+# CONFIG_ARCH_HAVE_USART7 is not set
+# CONFIG_ARCH_HAVE_USART8 is not set
+
+#
+# USART Configuration
+#
+CONFIG_USART2_ISUART=y
+CONFIG_MCU_SERIAL=y
+CONFIG_USART2_SERIAL_CONSOLE=y
+# CONFIG_NO_SERIAL_CONSOLE is not set
+
+#
+# USART2 Configuration
+#
+CONFIG_USART2_RXBUFSIZE=128
+CONFIG_USART2_TXBUFSIZE=128
+CONFIG_USART2_BAUD=115200
+CONFIG_USART2_BITS=8
+CONFIG_USART2_PARITY=0
+CONFIG_USART2_2STOP=0
+# CONFIG_USART2_IFLOWCONTROL is not set
+# CONFIG_USART2_OFLOWCONTROL is not set
+# CONFIG_SERIAL_IFLOWCONTROL is not set
+# CONFIG_SERIAL_OFLOWCONTROL is not set
+# CONFIG_USBDEV is not set
+# CONFIG_USBHOST is not set
+# CONFIG_WIRELESS is not set
+
+#
+# System Logging Device Options
+#
+
+#
+# System Logging
+#
+# CONFIG_RAMLOG is not set
+
+#
+# Networking Support
+#
+# CONFIG_ARCH_HAVE_NET is not set
+# CONFIG_ARCH_HAVE_PHY is not set
+# CONFIG_NET is not set
+
+#
+# File Systems
+#
+
+#
+# File system configuration
+#
+# CONFIG_DISABLE_MOUNTPOINT is not set
+# CONFIG_DISABLE_PSEUDOFS_OPERATIONS is not set
+CONFIG_FS_READABLE=y
+# CONFIG_FS_WRITABLE is not set
+# CONFIG_FS_RAMMAP is not set
+# CONFIG_FS_FAT is not set
+# CONFIG_FS_NXFFS is not set
+CONFIG_FS_ROMFS=y
+# CONFIG_FS_SMARTFS is not set
+# CONFIG_FS_PROCFS is not set
+
+#
+# System Logging
+#
+
+# CONFIG_SYSLOG is not set
+
+#
+# Graphics Support
+#
+# CONFIG_NX is not set
+
+#
+# Memory Management
+#
+# CONFIG_MM_SMALL is not set
+CONFIG_MM_REGIONS=2
+# CONFIG_ARCH_HAVE_HEAP2 is not set
+# CONFIG_GRAN is not set
+
+#
+# Audio Support
+#
+# CONFIG_AUDIO is not set
+
+#
+# Binary Formats
+#
+# CONFIG_BINFMT_DISABLE is not set
+CONFIG_BINFMT_EXEPATH=y
+CONFIG_PATH_INITIAL="/mnt/romfs"
+# CONFIG_NXFLAT is not set
+CONFIG_ELF=y
+CONFIG_ELF_ALIGN_LOG2=2
+CONFIG_ELF_STACKSIZE=2048
+CONFIG_ELF_BUFFERSIZE=128
+CONFIG_ELF_BUFFERINCR=32
+# CONFIG_BUILTIN is not set
+# CONFIG_PIC is not set
+CONFIG_BINFMT_CONSTRUCTORS=y
+CONFIG_SYMTAB_ORDEREDBYNAME=y
+
+#
+# Library Routines
+#
+
+#
+# Standard C Library Options
+#
+CONFIG_STDIO_BUFFER_SIZE=64
+CONFIG_STDIO_LINEBUFFER=y
+CONFIG_NUNGET_CHARS=2
+CONFIG_LIB_HOMEDIR="/"
+# CONFIG_LIBM is not set
+# CONFIG_NOPRINTF_FIELDWIDTH is not set
+# CONFIG_LIBC_FLOATINGPOINT is not set
+CONFIG_LIB_RAND_ORDER=1
+# CONFIG_EOL_IS_CR is not set
+# CONFIG_EOL_IS_LF is not set
+# CONFIG_EOL_IS_BOTH_CRLF is not set
+CONFIG_EOL_IS_EITHER_CRLF=y
+CONFIG_LIBC_EXECFUNCS=y
+CONFIG_EXECFUNCS_HAVE_SYMTAB=y
+CONFIG_EXECFUNCS_SYMTAB="exports"
+CONFIG_EXECFUNCS_NSYMBOLS=10
+CONFIG_POSIX_SPAWN_PROXY_STACKSIZE=1024
+CONFIG_TASK_SPAWN_DEFAULT_STACKSIZE=2048
+# CONFIG_LIBC_STRERROR is not set
+# CONFIG_LIBC_PERROR_STDOUT is not set
+CONFIG_ARCH_LOWPUTC=y
+CONFIG_LIB_SENDFILE_BUFSIZE=512
+# CONFIG_ARCH_ROMGETC is not set
+# CONFIG_ARCH_OPTIMIZED_FUNCTIONS is not set
+
+#
+# Non-standard Library Support
+#
+# CONFIG_SCHED_WORKQUEUE is not set
+# CONFIG_LIB_KBDCODEC is not set
+# CONFIG_LIB_SLCDCODEC is not set
+
+#
+# Basic CXX Support
+#
+# CONFIG_C99_BOOL8 is not set
+CONFIG_HAVE_CXX=y
+# CONFIG_HAVE_CXXINITIALIZE is not set
+# CONFIG_CXX_NEWLONG is not set
+
+#
+# uClibc++ Standard C++ Library
+#
+# CONFIG_UCLIBCXX is not set
+
+#
+# Application Configuration
+#
+
+#
+# Built-In Applications
+#
+
+#
+# Examples
+#
+# CONFIG_EXAMPLES_BUTTONS is not set
+# CONFIG_EXAMPLES_CAN is not set
+# CONFIG_EXAMPLES_CONFIGDATA is not set
+# CONFIG_EXAMPLES_CXXTEST is not set
+# CONFIG_EXAMPLES_DHCPD is not set
+# CONFIG_EXAMPLES_ELF is not set
+# CONFIG_EXAMPLES_FTPC is not set
+# CONFIG_EXAMPLES_FTPD is not set
+# CONFIG_EXAMPLES_HELLO is not set
+# CONFIG_EXAMPLES_HELLOXX is not set
+# CONFIG_EXAMPLES_JSON is not set
+# CONFIG_EXAMPLES_HIDKBD is not set
+# CONFIG_EXAMPLES_KEYPADTEST is not set
+# CONFIG_EXAMPLES_IGMP is not set
+# CONFIG_EXAMPLES_LCDRW is not set
+# CONFIG_EXAMPLES_MM is not set
+# CONFIG_EXAMPLES_MODBUS is not set
+# CONFIG_EXAMPLES_MOUNT is not set
+# CONFIG_EXAMPLES_NRF24L01TERM is not set
+# CONFIG_EXAMPLES_NSH is not set
+# CONFIG_EXAMPLES_NULL is not set
+# CONFIG_EXAMPLES_NX is not set
+# CONFIG_EXAMPLES_NXTERM is not set
+# CONFIG_EXAMPLES_NXFFS is not set
+# CONFIG_EXAMPLES_NXFLAT is not set
+# CONFIG_EXAMPLES_NXHELLO is not set
+# CONFIG_EXAMPLES_NXIMAGE is not set
+# CONFIG_EXAMPLES_NXLINES is not set
+# CONFIG_EXAMPLES_NXTEXT is not set
+# CONFIG_EXAMPLES_OSTEST is not set
+# CONFIG_EXAMPLES_PASHELLO is not set
+# CONFIG_EXAMPLES_PIPE is not set
+# CONFIG_EXAMPLES_POLL is not set
+CONFIG_EXAMPLES_POSIXSPAWN=y
+CONFIG_EXAMPLES_POSIXSPAWN_DEVMINOR=0
+CONFIG_EXAMPLES_POSIXSPAWN_DEVPATH="/dev/ram0"
+# CONFIG_EXAMPLES_QENCODER is not set
+# CONFIG_EXAMPLES_RGMP is not set
+# CONFIG_EXAMPLES_ROMFS is not set
+# CONFIG_EXAMPLES_SENDMAIL is not set
+# CONFIG_EXAMPLES_SERLOOP is not set
+# CONFIG_EXAMPLES_SLCD is not set
+# CONFIG_EXAMPLES_SMART is not set
+# CONFIG_EXAMPLES_TCPECHO is not set
+# CONFIG_EXAMPLES_TELNETD is not set
+# CONFIG_EXAMPLES_THTTPD is not set
+# CONFIG_EXAMPLES_TIFF is not set
+# CONFIG_EXAMPLES_TOUCHSCREEN is not set
+# CONFIG_EXAMPLES_UDP is not set
+# CONFIG_EXAMPLES_WEBSERVER is not set
+# CONFIG_EXAMPLES_USBSERIAL is not set
+# CONFIG_EXAMPLES_USBTERM is not set
+# CONFIG_EXAMPLES_WATCHDOG is not set
+
+#
+# Graphics Support
+#
+# CONFIG_TIFF is not set
+
+#
+# Interpreters
+#
+# CONFIG_INTERPRETERS_FICL is not set
+# CONFIG_INTERPRETERS_PCODE is not set
+
+#
+# Network Utilities
+#
+
+#
+# Networking Utilities
+#
+# CONFIG_NETUTILS_CODECS is not set
+# CONFIG_NETUTILS_DHCPD is not set
+# CONFIG_NETUTILS_FTPC is not set
+# CONFIG_NETUTILS_FTPD is not set
+# CONFIG_NETUTILS_JSON is not set
+# CONFIG_NETUTILS_SMTP is not set
+# CONFIG_NETUTILS_TFTPC is not set
+# CONFIG_NETUTILS_THTTPD is not set
+# CONFIG_NETUTILS_NETLIB is not set
+# CONFIG_NETUTILS_WEBCLIENT is not set
+
+#
+# FreeModBus
+#
+# CONFIG_MODBUS is not set
+
+#
+# NSH Library
+#
+# CONFIG_NSH_LIBRARY is not set
+
+#
+# NxWidgets/NxWM
+#
+
+#
+# Platform-specific Support
+#
+# CONFIG_PLATFORM_CONFIGDATA is not set
+
+#
+# System Libraries and NSH Add-Ons
+#
+
+#
+# USB CDC/ACM Device Commands
+#
+
+#
+# USB Composite Device Commands
+#
+
+#
+# Custom Free Memory Command
+#
+# CONFIG_SYSTEM_FREE is not set
+
+#
+# I2C tool
+#
+
+#
+# INI File Parser
+#
+# CONFIG_SYSTEM_INIFILE is not set
+
+#
+# FLASH Program Installation
+#
+# CONFIG_SYSTEM_INSTALL is not set
+
+#
+# FLASH Erase-all Command
+#
+
+#
+# NxPlayer media player library / command Line
+#
+# CONFIG_SYSTEM_NXPLAYER is not set
+
+#
+# RAM test
+#
+# CONFIG_SYSTEM_RAMTEST is not set
+
+#
+# readline()
+#
+# CONFIG_SYSTEM_READLINE is not set
+
+#
+# Power Off
+#
+# CONFIG_SYSTEM_POWEROFF is not set
+
+#
+# RAMTRON
+#
+# CONFIG_SYSTEM_RAMTRON is not set
+
+#
+# SD Card
+#
+# CONFIG_SYSTEM_SDCARD is not set
+
+#
+# Sysinfo
+#
+# CONFIG_SYSTEM_SYSINFO is not set
+
+#
+# USB Monitor
+#
+
+#
+# EMACS-like Command Line Editor
+#
+# CONFIG_SYSTEM_CLE is not set
+
+#
+# VI Work-Alike Editor
+#
+# CONFIG_SYSTEM_VI is not set
+
+#
+# Stack Monitor
+#
+
+#
+# USB Mass Storage Device Commands
+#
+
+#
+# Zmodem Commands
+#
+# CONFIG_SYSTEM_ZMODEM is not set
diff --git a/nuttx/configs/px4fmu-v2/posix_spawn/setenv.sh b/nuttx/configs/px4fmu-v2/posix_spawn/setenv.sh
new file mode 100755
index 000000000..ffc4c4fe2
--- /dev/null
+++ b/nuttx/configs/px4fmu-v2/posix_spawn/setenv.sh
@@ -0,0 +1,80 @@
+#!/bin/bash
+# configs/stm32f4discovery/posix_spawn/setenv.sh
+#
+#   Copyright (C) 2011-2012 Gregory Nutt. All rights reserved.
+#   Author: Gregory Nutt <gnutt@nuttx.org>
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions
+# are met:
+#
+# 1. Redistributions of source code must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+# 2. Redistributions in binary form must reproduce the above copyright
+#    notice, this list of conditions and the following disclaimer in
+#    the documentation and/or other materials provided with the
+#    distribution.
+# 3. Neither the name NuttX nor the names of its contributors may be
+#    used to endorse or promote products derived from this software
+#    without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+#
+
+if [ "$_" = "$0" ] ; then
+  echo "You must source this script, not run it!" 1>&2
+  exit 1
+fi
+
+WD=`pwd`
+if [ ! -x "setenv.sh" ]; then
+  echo "This script must be executed from the top-level NuttX build directory"
+  exit 1
+fi
+
+if [ -z "${PATH_ORIG}" ]; then
+  export PATH_ORIG="${PATH}"
+fi
+
+# This is the Cygwin path to the location where I installed the RIDE
+# toolchain under windows.  You will also have to edit this if you install
+# the RIDE toolchain in any other location
+#export TOOLCHAIN_BIN="/cygdrive/c/Program Files (x86)/Raisonance/Ride/arm-gcc/bin"
+
+# This is the Cygwin path to the location where I installed the CodeSourcery
+# toolchain under windows.  You will also have to edit this if you install
+# the CodeSourcery toolchain in any other location
+export TOOLCHAIN_BIN="/cygdrive/c/Program Files (x86)/CodeSourcery/Sourcery G++ Lite/bin"
+#export TOOLCHAIN_BIN="/cygdrive/c/Users/MyName/MentorGraphics/Sourcery_CodeBench_Lite_for_ARM_EABI/bin"
+
+# These are the Cygwin paths to the locations where I installed the Atollic
+# toolchain under windows.  You will also have to edit this if you install
+# the Atollic toolchain in any other location.  /usr/bin is added before
+# the Atollic bin path because there is are binaries named gcc.exe and g++.exe
+# at those locations as well.
+#export TOOLCHAIN_BIN="/usr/bin:/cygdrive/c/Program Files (x86)/Atollic/TrueSTUDIO for ARM Pro 2.3.0/ARMTools/bin"
+#export TOOLCHAIN_BIN="/usr/bin:/cygdrive/c/Program Files (x86)/Atollic/TrueSTUDIO for STMicroelectronics STM32 Lite 2.3.0/ARMTools/bin"
+
+# This is the Cygwin path to the location where I build the buildroot
+# toolchain.
+#export TOOLCHAIN_BIN="${WD}/../misc/buildroot/build_arm_nofpu/staging_dir/bin"
+
+# This the Cygwin path to the location where I built genromfs.  If you use
+# the buildroot toolchain, then genromfs can probably be found in TOOLCHAIN_DIR
+export GENROMFS_PATH="${WD}/../misc/buildroot/build_arm_nofpu/staging_dir/bin"
+
+# Add the path to the toolchain to the PATH varialble
+export PATH="${TOOLCHAIN_BIN}:${GENROMFS_PATH}:/sbin:/usr/sbin:${PATH_ORIG}"
+
+echo "PATH : ${PATH}"
diff --git a/nuttx/configs/px4fmu-v2/scripts/gnu-elf.ld b/nuttx/configs/px4fmu-v2/scripts/gnu-elf.ld
new file mode 100644
index 000000000..1f29f02f5
--- /dev/null
+++ b/nuttx/configs/px4fmu-v2/scripts/gnu-elf.ld
@@ -0,0 +1,129 @@
+/****************************************************************************
+ * configs/stm32f4discovery/scripts/gnu-elf.ld
+ *
+ *   Copyright (C) 2012 Gregory Nutt. All rights reserved.
+ *   Author: Gregory Nutt <gnutt@nuttx.org>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name NuttX nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ****************************************************************************/
+
+SECTIONS
+{
+  .text 0x00000000 :
+    {
+      _stext = . ;
+      *(.text)
+      *(.text.*)
+      *(.gnu.warning)
+      *(.stub)
+      *(.glue_7)
+      *(.glue_7t)
+      *(.jcr)
+
+      /* C++ support:  The .init and .fini sections contain specific logic
+       * to manage static constructors and destructors.
+       */
+
+      *(.gnu.linkonce.t.*)
+      *(.init)             /* Old ABI */
+      *(.fini)             /* Old ABI */
+      _etext = . ;
+    }
+
+  .rodata :
+    {
+      _srodata = . ;
+      *(.rodata)
+      *(.rodata1)
+      *(.rodata.*)
+      *(.gnu.linkonce.r*)
+      _erodata = . ;
+    }
+
+  .data :
+    {
+      _sdata = . ;
+      *(.data)
+      *(.data1)
+      *(.data.*)
+      *(.gnu.linkonce.d*)
+      _edata = . ;
+    }
+
+  /* C++ support. For each global and static local C++ object,
+   * GCC creates a small subroutine to construct the object. Pointers
+   * to these routines (not the routines themselves) are stored as
+   * simple, linear arrays in the .ctors section of the object file.
+   * Similarly, pointers to global/static destructor routines are
+   * stored in .dtors.
+   */
+
+  .ctors :
+    {
+      _sctors = . ;
+      *(.ctors)       /* Old ABI:  Unallocated */
+      *(.init_array)  /* New ABI:  Allocated */
+      _edtors = . ;
+    }
+
+  .dtors :
+    {
+      _sdtors = . ;
+      *(.dtors)       /* Old ABI:  Unallocated */
+      *(.fini_array)  /* New ABI:  Allocated */
+      _edtors = . ;
+    }
+
+  .bss :
+    {
+      _sbss = . ;
+      *(.bss)
+      *(.bss.*)
+      *(.sbss)
+      *(.sbss.*)
+      *(.gnu.linkonce.b*)
+      *(COMMON)
+      _ebss = . ;
+    }
+
+    /* Stabs debugging sections.    */
+
+    .stab 0 : { *(.stab) }
+    .stabstr 0 : { *(.stabstr) }
+    .stab.excl 0 : { *(.stab.excl) }
+    .stab.exclstr 0 : { *(.stab.exclstr) }
+    .stab.index 0 : { *(.stab.index) }
+    .stab.indexstr 0 : { *(.stab.indexstr) }
+    .comment 0 : { *(.comment) }
+    .debug_abbrev 0 : { *(.debug_abbrev) }
+    .debug_info 0 : { *(.debug_info) }
+    .debug_line 0 : { *(.debug_line) }
+    .debug_pubnames 0 : { *(.debug_pubnames) }
+    .debug_aranges 0 : { *(.debug_aranges) }
+}
diff --git a/nuttx/configs/px4fmu-v2/scripts/kernel-space.ld b/nuttx/configs/px4fmu-v2/scripts/kernel-space.ld
new file mode 100755
index 000000000..3feb651e6
--- /dev/null
+++ b/nuttx/configs/px4fmu-v2/scripts/kernel-space.ld
@@ -0,0 +1,109 @@
+/****************************************************************************
+ * configs/stm32f4discovery/scripts/kernel-space.ld
+ *
+ *   Copyright (C) 2013 Gregory Nutt. All rights reserved.
+ *   Author: Gregory Nutt <gnutt@nuttx.org>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name NuttX nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ****************************************************************************/
+
+/* NOTE:  This depends on the memory.ld script having been included prior to
+ * this script.
+ */
+
+OUTPUT_ARCH(arm)
+ENTRY(_stext)
+SECTIONS
+{
+    .text : {
+        _stext = ABSOLUTE(.);
+        *(.vectors)
+        *(.text .text.*)
+        *(.fixup)
+        *(.gnu.warning)
+        *(.rodata .rodata.*)
+        *(.gnu.linkonce.t.*)
+        *(.glue_7)
+        *(.glue_7t)
+        *(.got)
+        *(.gcc_except_table)
+        *(.gnu.linkonce.r.*)
+        _etext = ABSOLUTE(.);
+    } > kflash
+
+    .init_section : {
+        _sinit = ABSOLUTE(.);
+        *(.init_array .init_array.*)
+        _einit = ABSOLUTE(.);
+    } > kflash
+
+    .ARM.extab : {
+        *(.ARM.extab*)
+    } > kflash
+
+    __exidx_start = ABSOLUTE(.);
+    .ARM.exidx : {
+        *(.ARM.exidx*)
+    } > kflash
+
+    __exidx_end = ABSOLUTE(.);
+
+    _eronly = ABSOLUTE(.);
+
+    .data : {
+        _sdata = ABSOLUTE(.);
+        *(.data .data.*)
+        *(.gnu.linkonce.d.*)
+        CONSTRUCTORS
+        _edata = ABSOLUTE(.);
+    } > ksram AT > kflash
+
+    .bss : {
+        _sbss = ABSOLUTE(.);
+        *(.bss .bss.*)
+        *(.gnu.linkonce.b.*)
+        *(COMMON)
+        _ebss = ABSOLUTE(.);
+    } > ksram
+
+    /* Stabs debugging sections */
+
+    .stab 0 : { *(.stab) }
+    .stabstr 0 : { *(.stabstr) }
+    .stab.excl 0 : { *(.stab.excl) }
+    .stab.exclstr 0 : { *(.stab.exclstr) }
+    .stab.index 0 : { *(.stab.index) }
+    .stab.indexstr 0 : { *(.stab.indexstr) }
+    .comment 0 : { *(.comment) }
+    .debug_abbrev 0 : { *(.debug_abbrev) }
+    .debug_info 0 : { *(.debug_info) }
+    .debug_line 0 : { *(.debug_line) }
+    .debug_pubnames 0 : { *(.debug_pubnames) }
+    .debug_aranges 0 : { *(.debug_aranges) }
+}
diff --git a/nuttx/configs/px4fmu-v2/scripts/ld.script b/nuttx/configs/px4fmu-v2/scripts/ld.script
new file mode 100644
index 000000000..edc4a7091
--- /dev/null
+++ b/nuttx/configs/px4fmu-v2/scripts/ld.script
@@ -0,0 +1,122 @@
+/****************************************************************************
+ * configs/stm32f4discovery/scripts/ld.script
+ *
+ *   Copyright (C) 2011-2012 Gregory Nutt. All rights reserved.
+ *   Author: Gregory Nutt <gnutt@nuttx.org>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name NuttX nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ****************************************************************************/
+
+/* The STM32F407VG has 1024Kb of FLASH beginning at address 0x0800:0000 and
+ * 192Kb of SRAM. SRAM is split up into three blocks:
+ *
+ * 1) 112Kb of SRAM beginning at address 0x2000:0000
+ * 2)  16Kb of SRAM beginning at address 0x2001:c000
+ * 3)  64Kb of CCM SRAM beginning at address 0x1000:0000
+ *
+ * When booting from FLASH, FLASH memory is aliased to address 0x0000:0000
+ * where the code expects to begin execution by jumping to the entry point in
+ * the 0x0800:0000 address
+ * range.
+ */
+
+MEMORY
+{
+    flash (rx) : ORIGIN = 0x08000000, LENGTH = 1024K
+    sram (rwx) : ORIGIN = 0x20000000, LENGTH = 112K
+}
+
+OUTPUT_ARCH(arm)
+ENTRY(_stext)
+SECTIONS
+{
+	.text : {
+		_stext = ABSOLUTE(.);
+		*(.vectors)
+		*(.text .text.*)
+		*(.fixup)
+		*(.gnu.warning)
+		*(.rodata .rodata.*)
+		*(.gnu.linkonce.t.*)
+		*(.glue_7)
+		*(.glue_7t)
+		*(.got)
+		*(.gcc_except_table)
+		*(.gnu.linkonce.r.*)
+		_etext = ABSOLUTE(.);
+	} > flash
+
+	.init_section : {
+		_sinit = ABSOLUTE(.);
+		*(.init_array .init_array.*)
+		_einit = ABSOLUTE(.);
+	} > flash
+
+	.ARM.extab : {
+		*(.ARM.extab*)
+	} > flash
+
+	__exidx_start = ABSOLUTE(.);
+	.ARM.exidx : {
+		*(.ARM.exidx*)
+	} > flash
+	__exidx_end = ABSOLUTE(.);
+
+	_eronly = ABSOLUTE(.);
+
+	.data : {
+		_sdata = ABSOLUTE(.);
+		*(.data .data.*)
+		*(.gnu.linkonce.d.*)
+		CONSTRUCTORS
+		_edata = ABSOLUTE(.);
+	} > sram AT > flash
+
+	.bss : {
+		_sbss = ABSOLUTE(.);
+		*(.bss .bss.*)
+		*(.gnu.linkonce.b.*)
+		*(COMMON)
+		_ebss = ABSOLUTE(.);
+	} > sram
+
+	/* Stabs debugging sections. */
+	.stab 0 : { *(.stab) }
+	.stabstr 0 : { *(.stabstr) }
+	.stab.excl 0 : { *(.stab.excl) }
+	.stab.exclstr 0 : { *(.stab.exclstr) }
+	.stab.index 0 : { *(.stab.index) }
+	.stab.indexstr 0 : { *(.stab.indexstr) }
+	.comment 0 : { *(.comment) }
+	.debug_abbrev 0 : { *(.debug_abbrev) }
+	.debug_info 0 : { *(.debug_info) }
+	.debug_line 0 : { *(.debug_line) }
+	.debug_pubnames 0 : { *(.debug_pubnames) }
+	.debug_aranges 0 : { *(.debug_aranges) }
+}
diff --git a/nuttx/configs/px4fmu-v2/scripts/memory.ld b/nuttx/configs/px4fmu-v2/scripts/memory.ld
new file mode 100644
index 000000000..3a7480d87
--- /dev/null
+++ b/nuttx/configs/px4fmu-v2/scripts/memory.ld
@@ -0,0 +1,100 @@
+/****************************************************************************
+ * configs/stm32f4discovery/scripts/memory.ld
+ *
+ *   Copyright (C) 2013 Gregory Nutt. All rights reserved.
+ *   Author: Gregory Nutt <gnutt@nuttx.org>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name NuttX nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ****************************************************************************/
+
+/* The STM32F407VG has 1024Kb of FLASH beginning at address 0x0800:0000 and
+ * 192Kb of SRAM. SRAM is split up into three blocks:
+ *
+ * 1) 112KB of SRAM beginning at address 0x2000:0000
+ * 2)  16KB of SRAM beginning at address 0x2001:c000
+ * 3)  64KB of CCM SRAM beginning at address 0x1000:0000
+ *
+ * When booting from FLASH, FLASH memory is aliased to address 0x0000:0000
+ * where the code expects to begin execution by jumping to the entry point in
+ * the 0x0800:0000 address range.
+ *
+ * For MPU support, the kernel-mode NuttX section is assumed to be 128Kb of
+ * FLASH and 4Kb of SRAM.  That is an excessive amount for the kernel which
+ * should fit into 64KB and, of course, can be optimized as needed (See
+ * also configs/stm32f4discovery/scripts/kernel-space.ld).  Allowing the
+ * additional does permit addition debug instrumentation to be added to the
+ * kernel space without overflowing the partition.
+ *
+ * Alignment of the user space FLASH partition is also a critical factor:
+ * The user space FLASH partition will be spanned with a single region of
+ * size 2**n bytes.  The alignment of the user-space region must be the same.
+ * As a consequence, as the user-space increases in size, the alignmment
+ * requirement also increases.
+ *
+ * This alignment requirement means that the largest user space FLASH region
+ * you can have will be 512KB at it would have to be positioned at
+ * 0x08800000.  If you change this address, don't forget to change the
+ * CONFIG_NUTTX_USERSPACE configuration setting to match and to modify
+ * the check in kernel/userspace.c.
+ *
+ * For the same reasons, the maximum size of the SRAM mapping is limited to
+ * 4KB.  Both of these alignment limitations could be reduced by using
+ * multiple regions to map the FLASH/SDRAM range or perhaps with some
+ * clever use of subregions.
+ *
+ * A detailed memory map for the 112KB SRAM region is as follows:
+ *
+ *   0x20000 0000:  Kernel .data region.  Typical size: 0.1KB
+ *   ------- ----   Kernel .bss  region.  Typical size: 1.8KB
+ *   0x20000 0800:  Kernel IDLE thread stack (approximate).  Size is
+ *                  determined by CONFIG_IDLETHREAD_STACKSIZE and
+ *                  adjustments for alignment.  Typical is 1KB.
+ *   ------- ----   Padded to 4KB
+ *   0x20000 1000:  User .data region.  Size is variable.
+ *   ------- ----   User .bss region  Size is variable.
+ *   0x20000 2000:  Beginning of kernel heap.  Size determined by
+ *                  CONFIG_MM_KERNEL_HEAPSIZE.
+ *   ------- ----   Beginning of user heap.  Can vary with other settings.
+ *   0x20001 c000:  End+1 of CPU RAM
+ */
+
+MEMORY
+{
+    /* 1024Kb FLASH */
+
+    kflash (rx)      : ORIGIN = 0x08000000, LENGTH = 128K
+    uflash (rx)      : ORIGIN = 0x08020000, LENGTH = 128K
+    xflash (rx)      : ORIGIN = 0x08040000, LENGTH = 768K
+
+    /* 112Kb of contiguous SRAM */
+
+    ksram (rwx)      : ORIGIN = 0x20000000, LENGTH = 4K
+    usram (rwx)      : ORIGIN = 0x20001000, LENGTH = 4K
+    xsram (rwx)      : ORIGIN = 0x20002000, LENGTH = 104K
+}
diff --git a/nuttx/configs/px4fmu-v2/scripts/user-space.ld b/nuttx/configs/px4fmu-v2/scripts/user-space.ld
new file mode 100644
index 000000000..56d30a05f
--- /dev/null
+++ b/nuttx/configs/px4fmu-v2/scripts/user-space.ld
@@ -0,0 +1,126 @@
+/****************************************************************************
+ * configs/stm32f4discovery/scripts/user-space.ld
+ *
+ *   Copyright (C) 2013 Gregory Nutt. All rights reserved.
+ *   Author: Gregory Nutt <gnutt@nuttx.org>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name NuttX nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ****************************************************************************/
+
+/* NOTE:  This depends on the memory.ld script having been included prior to
+ * this script.
+ */
+
+/* Make sure that the critical memory management functions are in user-space.
+ * the user heap memory manager will reside in user-space but be usable both
+ * by kernel- and user-space code
+ */
+
+EXTERN(umm_initialize)
+EXTERN(umm_addregion)
+EXTERN(umm_trysemaphore)
+EXTERN(umm_givesemaphore)
+
+EXTERN(malloc)
+EXTERN(realloc)
+EXTERN(zalloc)
+EXTERN(free)
+
+OUTPUT_ARCH(arm)
+SECTIONS
+{
+    .userspace : {
+        *(.userspace)
+    } > uflash
+
+    .text : {
+        _stext = ABSOLUTE(.);
+        *(.text .text.*)
+        *(.fixup)
+        *(.gnu.warning)
+        *(.rodata .rodata.*)
+        *(.gnu.linkonce.t.*)
+        *(.glue_7)
+        *(.glue_7t)
+        *(.got)
+        *(.gcc_except_table)
+        *(.gnu.linkonce.r.*)
+        _etext = ABSOLUTE(.);
+    } > uflash
+
+    .init_section : {
+        _sinit = ABSOLUTE(.);
+        *(.init_array .init_array.*)
+        _einit = ABSOLUTE(.);
+    } > uflash
+
+    .ARM.extab : {
+        *(.ARM.extab*)
+    } > uflash
+
+    __exidx_start = ABSOLUTE(.);
+    .ARM.exidx : {
+        *(.ARM.exidx*)
+    } > uflash
+
+    __exidx_end = ABSOLUTE(.);
+
+    _eronly = ABSOLUTE(.);
+
+    .data : {
+        _sdata = ABSOLUTE(.);
+        *(.data .data.*)
+        *(.gnu.linkonce.d.*)
+        CONSTRUCTORS
+        _edata = ABSOLUTE(.);
+    } > usram AT > uflash
+
+    .bss : {
+        _sbss = ABSOLUTE(.);
+        *(.bss .bss.*)
+        *(.gnu.linkonce.b.*)
+        *(COMMON)
+        _ebss = ABSOLUTE(.);
+    } > usram
+
+    /* Stabs debugging sections */
+
+    .stab 0 : { *(.stab) }
+    .stabstr 0 : { *(.stabstr) }
+    .stab.excl 0 : { *(.stab.excl) }
+    .stab.exclstr 0 : { *(.stab.exclstr) }
+    .stab.index 0 : { *(.stab.index) }
+    .stab.indexstr 0 : { *(.stab.indexstr) }
+    .comment 0 : { *(.comment) }
+    .debug_abbrev 0 : { *(.debug_abbrev) }
+    .debug_info 0 : { *(.debug_info) }
+    .debug_line 0 : { *(.debug_line) }
+    .debug_pubnames 0 : { *(.debug_pubnames) }
+    .debug_aranges 0 : { *(.debug_aranges) }
+}
diff --git a/nuttx/configs/px4fmu-v2/src/.gitignore b/nuttx/configs/px4fmu-v2/src/.gitignore
new file mode 100644
index 000000000..726d936e1
--- /dev/null
+++ b/nuttx/configs/px4fmu-v2/src/.gitignore
@@ -0,0 +1,2 @@
+/.depend
+/Make.dep
diff --git a/nuttx/configs/px4fmu-v2/src/Makefile b/nuttx/configs/px4fmu-v2/src/Makefile
new file mode 100644
index 000000000..f015866ff
--- /dev/null
+++ b/nuttx/configs/px4fmu-v2/src/Makefile
@@ -0,0 +1,154 @@
+############################################################################
+# configs/stm32f4discovery/src/Makefile
+#
+#   Copyright (C) 2011-2013 Gregory Nutt. All rights reserved.
+#   Author: Gregory Nutt <gnutt@nuttx.org>
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions
+# are met:
+#
+# 1. Redistributions of source code must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+# 2. Redistributions in binary form must reproduce the above copyright
+#    notice, this list of conditions and the following disclaimer in
+#    the documentation and/or other materials provided with the
+#    distribution.
+# 3. Neither the name NuttX nor the names of its contributors may be
+#    used to endorse or promote products derived from this software
+#    without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+#
+############################################################################
+
+-include $(TOPDIR)/Make.defs
+
+CFLAGS += -I$(TOPDIR)/sched
+
+ASRCS =
+AOBJS = $(ASRCS:.S=$(OBJEXT))
+
+CSRCS = stm32_boot.c stm32_bringup.c stm32_spi.c
+
+ifeq ($(CONFIG_HAVE_CXX),y)
+CSRCS += stm32_cxxinitialize.c
+endif
+
+ifeq ($(CONFIG_ARCH_LEDS),y)
+CSRCS += stm32_autoleds.c
+else
+CSRCS += stm32_userleds.c
+endif
+
+ifeq ($(CONFIG_ARCH_BUTTONS),y)
+CSRCS +=  stm32_buttons.c
+endif
+
+ifeq ($(CONFIG_STM32_OTGFS),y)
+CSRCS += stm32_usb.c
+endif
+
+ifeq ($(CONFIG_STM32_SDIO),y)
+CSRCS += stm32_sdio.c
+endif
+
+ifeq ($(CONFIG_PWM),y)
+CSRCS += stm32_pwm.c
+endif
+
+ifeq ($(CONFIG_QENCODER),y)
+CSRCS += stm32_qencoder.c
+endif
+
+ifeq ($(CONFIG_WATCHDOG),y)
+CSRCS += stm32_watchdog.c
+endif
+
+ifeq ($(CONFIG_NSH_LIBRARY),y)
+CSRCS += stm32_nsh.c
+endif
+
+ifeq ($(CONFIG_ARCH_CUSTOM_PMINIT),y)
+CSRCS += stm32_pm.c
+endif
+
+ifeq ($(CONFIG_PM_BUTTONS),y)
+CSRCS += stm32_pm_buttons.c
+endif
+
+ifeq ($(CONFIG_ARCH_IDLE_CUSTOM),y)
+CSRCS += stm32_idle.c
+endif
+
+ifeq ($(CONFIG_STM32_FSMC),y)
+CSRCS += stm32_extmem.c
+
+ifeq ($(CONFIG_LCD_SSD1289),y)
+CSRCS += stm32_ssd1289.c
+endif
+endif
+
+ifeq ($(CONFIG_LCD_UG2864AMBAG01),y)
+CSRCS += stm32_ug2864ambag01.c
+endif
+
+ifeq ($(CONFIG_LCD_UG2864HSWEG01),y)
+CSRCS += stm32_ug2864hsweg01.c
+endif
+
+COBJS = $(CSRCS:.c=$(OBJEXT))
+
+SRCS = $(ASRCS) $(CSRCS)
+OBJS = $(AOBJS) $(COBJS)
+
+ARCH_SRCDIR = $(TOPDIR)/arch/$(CONFIG_ARCH)/src
+ifeq ($(CONFIG_WINDOWS_NATIVE),y)
+  CFLAGS += -I$(ARCH_SRCDIR)\chip -I$(ARCH_SRCDIR)\common -I$(ARCH_SRCDIR)\armv7-m
+else
+ifeq ($(WINTOOL),y)
+  CFLAGS += -I "${shell cygpath -w $(ARCH_SRCDIR)/chip}" \
+			-I "${shell cygpath -w $(ARCH_SRCDIR)/common}" \
+			-I "${shell cygpath -w $(ARCH_SRCDIR)/armv7-m}"
+else
+  CFLAGS += -I$(ARCH_SRCDIR)/chip -I$(ARCH_SRCDIR)/common -I$(ARCH_SRCDIR)/armv7-m
+endif
+endif
+
+all: libboard$(LIBEXT)
+
+$(AOBJS): %$(OBJEXT): %.S
+	$(call ASSEMBLE, $<, $@)
+
+$(COBJS) $(LINKOBJS): %$(OBJEXT): %.c
+	$(call COMPILE, $<, $@)
+
+libboard$(LIBEXT): $(OBJS)
+	$(call ARCHIVE, $@, $(OBJS))
+
+.depend: Makefile $(SRCS)
+	$(Q) $(MKDEP) $(CC) -- $(CFLAGS) -- $(SRCS) >Make.dep
+	$(Q) touch $@
+
+depend: .depend
+
+clean:
+	$(call DELFILE, libboard$(LIBEXT))
+	$(call CLEAN)
+
+distclean: clean
+	$(call DELFILE, Make.dep)
+	$(call DELFILE, .depend)
+
+-include Make.dep
diff --git a/nuttx/configs/px4fmu-v2/src/stm32_autoleds.c b/nuttx/configs/px4fmu-v2/src/stm32_autoleds.c
new file mode 100644
index 000000000..0327625bc
--- /dev/null
+++ b/nuttx/configs/px4fmu-v2/src/stm32_autoleds.c
@@ -0,0 +1,257 @@
+/****************************************************************************
+ * configs/stm32f4discovery/src/stm32_autoleds.c
+ *
+ *   Copyright (C) 2011-2013 Gregory Nutt. All rights reserved.
+ *   Author: Gregory Nutt <gnutt@nuttx.org>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name NuttX nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ****************************************************************************/
+
+/****************************************************************************
+ * Included Files
+ ****************************************************************************/
+
+#include <nuttx/config.h>
+
+#include <stdint.h>
+#include <stdbool.h>
+#include <debug.h>
+
+#include <arch/board/board.h>
+
+#include "chip.h"
+#include "up_arch.h"
+#include "up_internal.h"
+#include "stm32.h"
+#include "stm32f4discovery.h"
+
+#ifdef CONFIG_ARCH_LEDS
+
+/****************************************************************************
+ * Definitions
+ ****************************************************************************/
+
+/* CONFIG_DEBUG_LEDS enables debug output from this file (needs CONFIG_DEBUG
+ * with CONFIG_DEBUG_VERBOSE too)
+ */
+
+#ifdef CONFIG_DEBUG_LEDS
+#  define leddbg  lldbg
+#  define ledvdbg llvdbg
+#else
+#  define leddbg(x...)
+#  define ledvdbg(x...)
+#endif
+
+/* The following definitions map the encoded LED setting to GPIO settings */
+
+#define STM32F4_LED1      (1 << 0)
+#define STM32F4_LED2      (1 << 1)
+#define STM32F4_LED3      (1 << 2)
+#define STM32F4_LED4      (1 << 3)
+
+#define ON_SETBITS_SHIFT  (0)
+#define ON_CLRBITS_SHIFT  (4)
+#define OFF_SETBITS_SHIFT (8)
+#define OFF_CLRBITS_SHIFT (12)
+
+#define ON_BITS(v)        ((v) & 0xff)
+#define OFF_BITS(v)       (((v) >> 8) & 0x0ff)
+#define SETBITS(b)        ((b) & 0x0f)
+#define CLRBITS(b)        (((b) >> 4) & 0x0f)
+
+#define ON_SETBITS(v)     (SETBITS(ON_BITS(v))
+#define ON_CLRBITS(v)     (CLRBITS(ON_BITS(v))
+#define OFF_SETBITS(v)    (SETBITS(OFF_BITS(v))
+#define OFF_CLRBITS(v)    (CLRBITS(OFF_BITS(v))
+
+#define LED_STARTED_ON_SETBITS       ((STM32F4_LED1) << ON_SETBITS_SHIFT)
+#define LED_STARTED_ON_CLRBITS       ((STM32F4_LED2|STM32F4_LED3|STM32F4_LED4) << ON_CLRBITS_SHIFT)
+#define LED_STARTED_OFF_SETBITS      (0 << OFF_SETBITS_SHIFT)
+#define LED_STARTED_OFF_CLRBITS      ((STM32F4_LED1|STM32F4_LED2|STM32F4_LED3|STM32F4_LED4) << OFF_CLRBITS_SHIFT)
+
+#define LED_HEAPALLOCATE_ON_SETBITS  ((STM32F4_LED2) << ON_SETBITS_SHIFT)
+#define LED_HEAPALLOCATE_ON_CLRBITS  ((STM32F4_LED1|STM32F4_LED3|STM32F4_LED4) << ON_CLRBITS_SHIFT)
+#define LED_HEAPALLOCATE_OFF_SETBITS ((STM32F4_LED1) << OFF_SETBITS_SHIFT)
+#define LED_HEAPALLOCATE_OFF_CLRBITS ((STM32F4_LED2|STM32F4_LED3|STM32F4_LED4) << OFF_CLRBITS_SHIFT)
+
+#define LED_IRQSENABLED_ON_SETBITS   ((STM32F4_LED1|STM32F4_LED2) << ON_SETBITS_SHIFT)
+#define LED_IRQSENABLED_ON_CLRBITS   ((STM32F4_LED3|STM32F4_LED4) << ON_CLRBITS_SHIFT)
+#define LED_IRQSENABLED_OFF_SETBITS  ((STM32F4_LED2) << OFF_SETBITS_SHIFT)
+#define LED_IRQSENABLED_OFF_CLRBITS  ((STM32F4_LED1|STM32F4_LED3|STM32F4_LED4) << OFF_CLRBITS_SHIFT)
+
+#define LED_STACKCREATED_ON_SETBITS  ((STM32F4_LED3) << ON_SETBITS_SHIFT)
+#define LED_STACKCREATED_ON_CLRBITS  ((STM32F4_LED1|STM32F4_LED2|STM32F4_LED4) << ON_CLRBITS_SHIFT)
+#define LED_STACKCREATED_OFF_SETBITS ((STM32F4_LED1|STM32F4_LED2) << OFF_SETBITS_SHIFT)
+#define LED_STACKCREATED_OFF_CLRBITS ((STM32F4_LED3|STM32F4_LED4) << OFF_CLRBITS_SHIFT)
+
+#define LED_INIRQ_ON_SETBITS         ((STM32F4_LED1) << ON_SETBITS_SHIFT)
+#define LED_INIRQ_ON_CLRBITS         ((0) << ON_CLRBITS_SHIFT)
+#define LED_INIRQ_OFF_SETBITS        ((0) << OFF_SETBITS_SHIFT)
+#define LED_INIRQ_OFF_CLRBITS        ((STM32F4_LED1) << OFF_CLRBITS_SHIFT)
+
+#define LED_SIGNAL_ON_SETBITS        ((STM32F4_LED2) << ON_SETBITS_SHIFT)
+#define LED_SIGNAL_ON_CLRBITS        ((0) << ON_CLRBITS_SHIFT)
+#define LED_SIGNAL_OFF_SETBITS       ((0) << OFF_SETBITS_SHIFT)
+#define LED_SIGNAL_OFF_CLRBITS       ((STM32F4_LED2) << OFF_CLRBITS_SHIFT)
+
+#define LED_ASSERTION_ON_SETBITS     ((STM32F4_LED4) << ON_SETBITS_SHIFT)
+#define LED_ASSERTION_ON_CLRBITS     ((0) << ON_CLRBITS_SHIFT)
+#define LED_ASSERTION_OFF_SETBITS    ((0) << OFF_SETBITS_SHIFT)
+#define LED_ASSERTION_OFF_CLRBITS    ((STM32F4_LED4) << OFF_CLRBITS_SHIFT)
+
+#define LED_PANIC_ON_SETBITS         ((STM32F4_LED4) << ON_SETBITS_SHIFT)
+#define LED_PANIC_ON_CLRBITS         ((0) << ON_CLRBITS_SHIFT)
+#define LED_PANIC_OFF_SETBITS        ((0) << OFF_SETBITS_SHIFT)
+#define LED_PANIC_OFF_CLRBITS        ((STM32F4_LED4) << OFF_CLRBITS_SHIFT)
+
+/****************************************************************************
+ * Private Data
+ ****************************************************************************/
+
+static const uint16_t g_ledbits[8] =
+{
+  (LED_STARTED_ON_SETBITS       | LED_STARTED_ON_CLRBITS |
+   LED_STARTED_OFF_SETBITS      | LED_STARTED_OFF_CLRBITS),
+
+  (LED_HEAPALLOCATE_ON_SETBITS  | LED_HEAPALLOCATE_ON_CLRBITS |
+   LED_HEAPALLOCATE_OFF_SETBITS | LED_HEAPALLOCATE_OFF_CLRBITS),
+
+  (LED_IRQSENABLED_ON_SETBITS   | LED_IRQSENABLED_ON_CLRBITS |
+   LED_IRQSENABLED_OFF_SETBITS  | LED_IRQSENABLED_OFF_CLRBITS),
+
+  (LED_STACKCREATED_ON_SETBITS  | LED_STACKCREATED_ON_CLRBITS |
+   LED_STACKCREATED_OFF_SETBITS | LED_STACKCREATED_OFF_CLRBITS),
+
+  (LED_INIRQ_ON_SETBITS         | LED_INIRQ_ON_CLRBITS |
+   LED_INIRQ_OFF_SETBITS        | LED_INIRQ_OFF_CLRBITS),
+
+  (LED_SIGNAL_ON_SETBITS        | LED_SIGNAL_ON_CLRBITS |
+   LED_SIGNAL_OFF_SETBITS       | LED_SIGNAL_OFF_CLRBITS),
+
+  (LED_ASSERTION_ON_SETBITS     | LED_ASSERTION_ON_CLRBITS |
+   LED_ASSERTION_OFF_SETBITS    | LED_ASSERTION_OFF_CLRBITS),
+
+  (LED_PANIC_ON_SETBITS         | LED_PANIC_ON_CLRBITS |
+   LED_PANIC_OFF_SETBITS        | LED_PANIC_OFF_CLRBITS)
+};
+
+/****************************************************************************
+ * Private Functions
+ ****************************************************************************/
+
+static inline void led_clrbits(unsigned int clrbits)
+{
+  if ((clrbits & STM32F4_LED1) != 0)
+    {
+      stm32_gpiowrite(GPIO_LED1, false);
+    }
+
+  if ((clrbits & STM32F4_LED2) != 0)
+    {
+      stm32_gpiowrite(GPIO_LED2, false);
+    }
+
+  if ((clrbits & STM32F4_LED3) != 0)
+    {
+      stm32_gpiowrite(GPIO_LED3, false);
+    }
+
+  if ((clrbits & STM32F4_LED4) != 0)
+    {
+      stm32_gpiowrite(GPIO_LED4, false);
+    }
+}
+
+static inline void led_setbits(unsigned int setbits)
+{
+  if ((setbits & STM32F4_LED1) != 0)
+    {
+      stm32_gpiowrite(GPIO_LED1, true);
+    }
+
+  if ((setbits & STM32F4_LED2) != 0)
+    {
+      stm32_gpiowrite(GPIO_LED2, true);
+    }
+
+  if ((setbits & STM32F4_LED3) != 0)
+    {
+      stm32_gpiowrite(GPIO_LED3, true);
+    }
+
+  if ((setbits & STM32F4_LED4) != 0)
+    {
+      stm32_gpiowrite(GPIO_LED4, true);
+    }
+}
+
+static void led_setonoff(unsigned int bits)
+{
+  led_clrbits(CLRBITS(bits));
+  led_setbits(SETBITS(bits));
+}
+
+/****************************************************************************
+ * Public Functions
+ ****************************************************************************/
+
+/****************************************************************************
+ * Name: board_led_initialize
+ ****************************************************************************/
+
+void board_led_initialize(void)
+{
+   /* Configure LED1-4 GPIOs for output */
+
+   stm32_configgpio(GPIO_LED1);
+   stm32_configgpio(GPIO_LED2);
+   stm32_configgpio(GPIO_LED3);
+   stm32_configgpio(GPIO_LED4);
+}
+
+/****************************************************************************
+ * Name: board_led_on
+ ****************************************************************************/
+
+void board_led_on(int led)
+{
+  led_setonoff(ON_BITS(g_ledbits[led]));
+}
+
+/****************************************************************************
+ * Name: board_led_off
+ ****************************************************************************/
+
+void board_led_off(int led)
+{
+  led_setonoff(OFF_BITS(g_ledbits[led]));
+}
+
+#endif /* CONFIG_ARCH_LEDS */
diff --git a/nuttx/configs/px4fmu-v2/src/stm32_boot.c b/nuttx/configs/px4fmu-v2/src/stm32_boot.c
new file mode 100644
index 000000000..413c580cd
--- /dev/null
+++ b/nuttx/configs/px4fmu-v2/src/stm32_boot.c
@@ -0,0 +1,124 @@
+/************************************************************************************
+ * configs/stm32f4discovery/src/stm32_boot.c
+ *
+ *   Copyright (C) 2011-2012 Gregory Nutt. All rights reserved.
+ *   Author: Gregory Nutt <gnutt@nuttx.org>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name NuttX nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ************************************************************************************/
+
+/************************************************************************************
+ * Included Files
+ ************************************************************************************/
+
+#include <nuttx/config.h>
+
+#include <debug.h>
+
+#include <arch/board/board.h>
+
+#include "up_arch.h"
+#include "stm32f4discovery.h"
+
+/************************************************************************************
+ * Definitions
+ ************************************************************************************/
+
+/************************************************************************************
+ * Private Functions
+ ************************************************************************************/
+
+/************************************************************************************
+ * Public Functions
+ ************************************************************************************/
+
+/************************************************************************************
+ * Name: stm32_boardinitialize
+ *
+ * Description:
+ *   All STM32 architectures must provide the following entry point.  This entry point
+ *   is called early in the initialization -- after all memory has been configured
+ *   and mapped but before any devices have been initialized.
+ *
+ ************************************************************************************/
+
+void stm32_boardinitialize(void)
+{
+#if defined(CONFIG_STM32_SPI1) || defined(CONFIG_STM32_SPI2) || defined(CONFIG_STM32_SPI3)
+  /* Configure SPI chip selects if 1) SPI is not disabled, and 2) the weak function
+   * stm32_spiinitialize() has been brought into the link.
+   */
+
+  if (stm32_spiinitialize)
+    {
+      stm32_spiinitialize();
+    }
+#endif
+
+#ifdef CONFIG_STM32_OTGFS
+  /* Initialize USB if the 1) OTG FS controller is in the configuration and 2)
+   * disabled, and 3) the weak function stm32_usbinitialize() has been brought
+   * into the build. Presumably either CONFIG_USBDEV or CONFIG_USBHOST is also
+   * selected.
+   */
+
+  if (stm32_usbinitialize)
+    {
+      stm32_usbinitialize();
+    }
+#endif
+
+#ifdef CONFIG_ARCH_LEDS
+  /* Configure on-board LEDs if LED support has been selected. */
+
+  board_led_initialize();
+#endif
+}
+
+/****************************************************************************
+ * Name: board_initialize
+ *
+ * Description:
+ *   If CONFIG_BOARD_INITIALIZE is selected, then an additional
+ *   initialization call will be performed in the boot-up sequence to a
+ *   function called board_initialize().  board_initialize() will be
+ *   called immediately after up_initialize() is called and just before the
+ *   initial application is started.  This additional initialization phase
+ *   may be used, for example, to initialize board-specific device drivers.
+ *
+ ****************************************************************************/
+
+#ifdef CONFIG_BOARD_INITIALIZE
+void board_initialize(void)
+{
+  /* Perform board-specific initialization */
+
+  (void)stm32_bringup();
+}
+#endif
diff --git a/nuttx/configs/px4fmu-v2/src/stm32_bringup.c b/nuttx/configs/px4fmu-v2/src/stm32_bringup.c
new file mode 100644
index 000000000..0b7f7adb1
--- /dev/null
+++ b/nuttx/configs/px4fmu-v2/src/stm32_bringup.c
@@ -0,0 +1,119 @@
+/****************************************************************************
+ * config/stm32f4discovery/src/stm32_bringup.c
+ *
+ *   Copyright (C) 2012, 2014 Gregory Nutt. All rights reserved.
+ *   Author: Gregory Nutt <gnutt@nuttx.org>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name NuttX nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ****************************************************************************/
+
+/****************************************************************************
+ * Included Files
+ ****************************************************************************/
+
+#include <nuttx/config.h>
+
+#include <stdbool.h>
+#include <stdio.h>
+#include <debug.h>
+#include <errno.h>
+
+#ifdef CONFIG_SYSTEM_USBMONITOR
+#  include <apps/usbmonitor.h>
+#endif
+
+#ifdef CONFIG_STM32_OTGFS
+#  include "stm32_usbhost.h"
+#endif
+
+#include "stm32.h"
+#include "stm32f4discovery.h"
+
+/****************************************************************************
+ * Pre-Processor Definitions
+ ****************************************************************************/
+
+/****************************************************************************
+ * Public Functions
+ ****************************************************************************/
+
+/****************************************************************************
+ * Name: stm32_bringup
+ *
+ * Description:
+ *   Perform architecture-specific initialization
+ *
+ *   CONFIG_BOARD_INITIALIZE=y :
+ *     Called from board_initialize().
+ *
+ *   CONFIG_BOARD_INITIALIZE=n && CONFIG_NSH_ARCHINIT=y :
+ *     Called from the NSH library
+ *
+ ****************************************************************************/
+
+int stm32_bringup(void)
+{
+  int ret = OK;
+
+#ifdef HAVE_SDIO
+  /* Initialize the SDIO block driver */
+
+  ret = stm32_sdio_initialize();
+  if (ret != OK)
+    {
+      fdbg("Failed to initialize MMC/SD driver: %d\n", ret);
+      return ret;
+    }
+#endif
+
+#ifdef HAVE_USBHOST
+  /* Initialize USB host operation.  stm32_usbhost_initialize() starts a thread
+   * will monitor for USB connection and disconnection events.
+   */
+
+  ret = stm32_usbhost_initialize();
+  if (ret != OK)
+    {
+      udbg("Failed to initialize USB host: %d\n", ret);
+      return ret;
+    }
+#endif
+
+#ifdef HAVE_USBMONITOR
+  /* Start the USB Monitor */
+
+  ret = usbmonitor_start(0, NULL);
+  if (ret != OK)
+    {
+      udbg("Start USB monitor: %d\n", ret);
+    }
+#endif
+
+  return ret;
+}
diff --git a/nuttx/configs/px4fmu-v2/src/stm32_buttons.c b/nuttx/configs/px4fmu-v2/src/stm32_buttons.c
new file mode 100644
index 000000000..f6164bb91
--- /dev/null
+++ b/nuttx/configs/px4fmu-v2/src/stm32_buttons.c
@@ -0,0 +1,167 @@
+/****************************************************************************
+ * configs/stm32f4discovery/src/stm32_buttons.c
+ *
+ *   Copyright (C) 2011-2012, 2014 Gregory Nutt. All rights reserved.
+ *   Author: Gregory Nutt <gnutt@nuttx.org>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name NuttX nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ****************************************************************************/
+
+/****************************************************************************
+ * Included Files
+ ****************************************************************************/
+
+#include <nuttx/config.h>
+
+#include <stdint.h>
+
+#include <nuttx/arch.h>
+#include <arch/board/board.h>
+
+#include "stm32f4discovery.h"
+
+#ifdef CONFIG_ARCH_BUTTONS
+
+/****************************************************************************
+ * Definitions
+ ****************************************************************************/
+
+/****************************************************************************
+ * Private Data
+ ****************************************************************************/
+
+/****************************************************************************
+ * Private Functions
+ ****************************************************************************/
+
+/* Pin configuration for each STM32F4 Discovery button.  This array is indexed by
+ * the BUTTON_* definitions in board.h
+ */
+
+static const uint16_t g_buttons[NUM_BUTTONS] =
+{
+  GPIO_BTN_USER
+};
+
+/****************************************************************************
+ * Public Functions
+ ****************************************************************************/
+
+/****************************************************************************
+ * Name: board_button_initialize
+ *
+ * Description:
+ *   board_button_initialize() must be called to initialize button resources.  After
+ *   that, board_buttons() may be called to collect the current state of all
+ *   buttons or board_button_irq() may be called to register button interrupt
+ *   handlers.
+ *
+ ****************************************************************************/
+
+void board_button_initialize(void)
+{
+  int i;
+
+  /* Configure the GPIO pins as inputs.  NOTE that EXTI interrupts are
+   * configured for all pins.
+   */
+
+  for (i = 0; i < NUM_BUTTONS; i++)
+    {
+      stm32_configgpio(g_buttons[i]);
+    }
+}
+
+/****************************************************************************
+ * Name: board_buttons
+ ****************************************************************************/
+
+uint8_t board_buttons(void)
+{
+  uint8_t ret = 0;
+  int i;
+
+  /* Check that state of each key */
+
+  for (i = 0; i < NUM_BUTTONS; i++)
+    {
+       /* A LOW value means that the key is pressed.
+        */
+
+       bool released = stm32_gpioread(g_buttons[i]);
+
+       /* Accumulate the set of depressed (not released) keys */
+
+       if (!released)
+         {
+            ret |= (1 << i);
+         }
+    }
+
+  return ret;
+}
+
+/************************************************************************************
+ * Button support.
+ *
+ * Description:
+ *   board_button_initialize() must be called to initialize button resources.  After
+ *   that, board_buttons() may be called to collect the current state of all
+ *   buttons or board_button_irq() may be called to register button interrupt
+ *   handlers.
+ *
+ *   After board_button_initialize() has been called, board_buttons() may be called to
+ *   collect the state of all buttons.  board_buttons() returns an 8-bit bit set
+ *   with each bit associated with a button.  See the BUTTON_*_BIT
+ *   definitions in board.h for the meaning of each bit.
+ *
+ *   board_button_irq() may be called to register an interrupt handler that will
+ *   be called when a button is depressed or released.  The ID value is a
+ *   button enumeration value that uniquely identifies a button resource. See the
+ *   BUTTON_* definitions in board.h for the meaning of enumeration
+ *   value.  The previous interrupt handler address is returned (so that it may
+ *   restored, if so desired).
+ *
+ ************************************************************************************/
+
+#ifdef CONFIG_ARCH_IRQBUTTONS
+xcpt_t board_button_irq(int id, xcpt_t irqhandler)
+{
+  xcpt_t oldhandler = NULL;
+
+  /* The following should be atomic */
+
+  if (id >= MIN_IRQBUTTON && id <= MAX_IRQBUTTON)
+    {
+      oldhandler = stm32_gpiosetevent(g_buttons[id], true, true, true, irqhandler);
+    }
+  return oldhandler;
+}
+#endif
+#endif /* CONFIG_ARCH_BUTTONS */
diff --git a/nuttx/configs/px4fmu-v2/src/stm32_cxxinitialize.c b/nuttx/configs/px4fmu-v2/src/stm32_cxxinitialize.c
new file mode 100644
index 000000000..87064b318
--- /dev/null
+++ b/nuttx/configs/px4fmu-v2/src/stm32_cxxinitialize.c
@@ -0,0 +1,154 @@
+/************************************************************************************
+ * configs/stm32f4discovery/src/stm32_cxxinitialize.c
+ *
+ *   Copyright (C) 2012 Gregory Nutt. All rights reserved.
+ *   Author: Gregory Nutt <gnutt@nuttx.org>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name NuttX nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ************************************************************************************/
+
+/************************************************************************************
+ * Included Files
+ ************************************************************************************/
+
+#include <nuttx/config.h>
+
+#include <debug.h>
+
+#include <nuttx/arch.h>
+
+#include <arch/stm32/chip.h>
+#include "chip.h"
+
+#if defined(CONFIG_HAVE_CXX) && defined(CONFIG_HAVE_CXXINITIALIZE)
+
+/************************************************************************************
+ * Definitions
+ ************************************************************************************/
+/* Debug ****************************************************************************/
+/* Non-standard debug that may be enabled just for testing the static constructors */
+
+#ifndef CONFIG_DEBUG
+#  undef CONFIG_DEBUG_CXX
+#endif
+
+#ifdef CONFIG_DEBUG_CXX
+#  define cxxdbg              dbg
+#  define cxxlldbg            lldbg
+#  ifdef CONFIG_DEBUG_VERBOSE
+#    define cxxvdbg           vdbg
+#    define cxxllvdbg         llvdbg
+#  else
+#    define cxxvdbg(x...)
+#    define cxxllvdbg(x...)
+#  endif
+#else
+#  define cxxdbg(x...)
+#  define cxxlldbg(x...)
+#  define cxxvdbg(x...)
+#  define cxxllvdbg(x...)
+#endif
+
+/************************************************************************************
+ * Private Types
+ ************************************************************************************/
+/* This type defines one entry in initialization array */
+
+typedef void (*initializer_t)(void);
+
+/************************************************************************************
+ * External references
+ ************************************************************************************/
+/* _sinit and _einit are symbols exported by the linker script that mark the
+ * beginning and the end of the C++ initialization section.
+ */
+
+extern initializer_t _sinit;
+extern initializer_t _einit;
+
+/* _stext and _etext are symbols exported by the linker script that mark the
+ * beginning and the end of text.
+ */
+
+extern uint32_t _stext;
+extern uint32_t _etext;
+
+/************************************************************************************
+ * Private Functions
+ ************************************************************************************/
+
+/************************************************************************************
+ * Public Functions
+ ************************************************************************************/
+
+/****************************************************************************
+ * Name: up_cxxinitialize
+ *
+ * Description:
+ *   If C++ and C++ static constructors are supported, then this function
+ *   must be provided by board-specific logic in order to perform
+ *   initialization of the static C++ class instances.
+ *
+ *   This function should then be called in the application-specific
+ *   user_start logic in order to perform the C++ initialization.  NOTE
+ *   that no component of the core NuttX RTOS logic is involved; This
+ *   function defintion only provides the 'contract' between application
+ *   specific C++ code and platform-specific toolchain support
+ *
+ ***************************************************************************/
+
+void up_cxxinitialize(void)
+{
+  initializer_t *initp;
+
+  cxxdbg("_sinit: %p _einit: %p _stext: %p _etext: %p\n",
+         &_sinit, &_einit, &_stext, &_etext);
+
+  /* Visit each entry in the initialzation table */
+
+  for (initp = &_sinit; initp != &_einit; initp++)
+    {
+      initializer_t initializer = *initp;
+      cxxdbg("initp: %p initializer: %p\n", initp, initializer);
+
+      /* Make sure that the address is non-NULL and lies in the text region
+       * defined by the linker script.  Some toolchains may put NULL values
+       * or counts in the initialization table
+       */
+
+      if ((void*)initializer > (void*)&_stext && (void*)initializer < (void*)&_etext)
+        {
+          cxxdbg("Calling %p\n", initializer);
+          initializer();
+        }
+    }
+}
+
+#endif /* CONFIG_HAVE_CXX && CONFIG_HAVE_CXXINITIALIZE */
+
diff --git a/nuttx/configs/px4fmu-v2/src/stm32_extmem.c b/nuttx/configs/px4fmu-v2/src/stm32_extmem.c
new file mode 100644
index 000000000..3717317fd
--- /dev/null
+++ b/nuttx/configs/px4fmu-v2/src/stm32_extmem.c
@@ -0,0 +1,187 @@
+/************************************************************************************
+ * configs/stm32f4disovery/src/stm32_extmem.c
+ *
+ *   Copyright (C) 2012 Gregory Nutt. All rights reserved.
+ *   Author: Gregory Nutt <gnutt@nuttx.org>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name NuttX nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ************************************************************************************/
+
+/************************************************************************************
+ * Included Files
+ ************************************************************************************/
+
+#include <nuttx/config.h>
+
+#include <stdint.h>
+#include <assert.h>
+#include <debug.h>
+
+#include <arch/board/board.h>
+
+#include "chip.h"
+#include "up_arch.h"
+
+#include "stm32_fsmc.h"
+#include "stm32_gpio.h"
+#include "stm32.h"
+#include "stm32f4discovery.h"
+
+/************************************************************************************
+ * Pre-processor Definitions
+ ************************************************************************************/
+
+#ifndef CONFIG_STM32_FSMC
+#  warning "FSMC is not enabled"
+#endif
+
+#if STM32_NGPIO_PORTS < 6
+#  error "Required GPIO ports not enabled"
+#endif
+
+#define STM32_FSMC_NADDRCONFIGS 26
+#define STM32_FSMC_NDATACONFIGS 16
+
+/************************************************************************************
+ * Public Data
+ ************************************************************************************/
+
+/* GPIO configurations common to most external memories */
+
+static const uint32_t g_addressconfig[STM32_FSMC_NADDRCONFIGS] =
+{
+  GPIO_FSMC_A0,  GPIO_FSMC_A1 , GPIO_FSMC_A2,  GPIO_FSMC_A3,  GPIO_FSMC_A4 , GPIO_FSMC_A5,
+  GPIO_FSMC_A6,  GPIO_FSMC_A7,  GPIO_FSMC_A8,  GPIO_FSMC_A9,  GPIO_FSMC_A10, GPIO_FSMC_A11,
+  GPIO_FSMC_A12, GPIO_FSMC_A13, GPIO_FSMC_A14, GPIO_FSMC_A15, GPIO_FSMC_A16, GPIO_FSMC_A17,
+  GPIO_FSMC_A18, GPIO_FSMC_A19, GPIO_FSMC_A20, GPIO_FSMC_A21, GPIO_FSMC_A22, GPIO_FSMC_A23,
+  GPIO_FSMC_A24, GPIO_FSMC_A25
+};
+
+static const uint32_t g_dataconfig[STM32_FSMC_NDATACONFIGS] =
+{
+  GPIO_FSMC_D0,  GPIO_FSMC_D1 , GPIO_FSMC_D2,  GPIO_FSMC_D3,  GPIO_FSMC_D4 , GPIO_FSMC_D5,
+  GPIO_FSMC_D6,  GPIO_FSMC_D7,  GPIO_FSMC_D8,  GPIO_FSMC_D9,  GPIO_FSMC_D10, GPIO_FSMC_D11,
+  GPIO_FSMC_D12, GPIO_FSMC_D13, GPIO_FSMC_D14, GPIO_FSMC_D15
+};
+
+/************************************************************************************
+ * Private Data
+ ************************************************************************************/
+
+/************************************************************************************
+ * Private Functions
+ ************************************************************************************/
+
+/************************************************************************************
+ * Public Functions
+ ************************************************************************************/
+
+/************************************************************************************
+ * Name: stm32_extmemgpios
+ *
+ * Description:
+ *   Initialize GPIOs for external memory usage
+ *
+ ************************************************************************************/
+
+void stm32_extmemgpios(const uint32_t *gpios, int ngpios)
+{
+  int i;
+
+  /* Configure GPIOs */
+
+  for (i = 0; i < ngpios; i++)
+    {
+      stm32_configgpio(gpios[i]);
+    }
+}
+
+/************************************************************************************
+ * Name: stm32_extmemaddr
+ *
+ * Description:
+ *   Initialize adress line GPIOs for external memory access
+ *
+ ************************************************************************************/
+
+void stm32_extmemaddr(int naddrs)
+{
+  stm32_extmemgpios(g_addressconfig, naddrs);
+}
+
+/************************************************************************************
+ * Name: stm32_extmemdata
+ *
+ * Description:
+ *   Initialize data line GPIOs for external memory access
+ *
+ ************************************************************************************/
+
+void stm32_extmemdata(int ndata)
+{
+  stm32_extmemgpios(g_dataconfig, ndata);
+}
+
+/************************************************************************************
+ * Name: stm32_enablefsmc
+ *
+ * Description:
+ *  enable clocking to the FSMC module
+ *
+ ************************************************************************************/
+
+void stm32_enablefsmc(void)
+{
+  uint32_t regval;
+
+  /* Enable AHB clocking to the FSMC */
+
+  regval  = getreg32( STM32_RCC_AHB3ENR);
+  regval |= RCC_AHB3ENR_FSMCEN;
+  putreg32(regval, STM32_RCC_AHB3ENR);
+}
+
+/************************************************************************************
+ * Name: stm32_disablefsmc
+ *
+ * Description:
+ *  enable clocking to the FSMC module
+ *
+ ************************************************************************************/
+
+void stm32_disablefsmc(void)
+{
+  uint32_t regval;
+
+  /* Disable AHB clocking to the FSMC */
+
+  regval  = getreg32(STM32_RCC_AHB3ENR);
+  regval &= ~RCC_AHB3ENR_FSMCEN;
+  putreg32(regval, STM32_RCC_AHB3ENR);
+}
diff --git a/nuttx/configs/px4fmu-v2/src/stm32_idle.c b/nuttx/configs/px4fmu-v2/src/stm32_idle.c
new file mode 100644
index 000000000..861df5123
--- /dev/null
+++ b/nuttx/configs/px4fmu-v2/src/stm32_idle.c
@@ -0,0 +1,276 @@
+/****************************************************************************
+ * configs/stm32f4discovery/src/stm32_idle.c
+ *
+ *   Copyright (C) 2012 Gregory Nutt. All rights reserved.
+ *   Authors: Gregory Nutt <gnutt@nuttx.org>
+ *            Diego Sanchez <dsanchez@nx-engineering.com>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name NuttX nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ *
+ ****************************************************************************/
+
+/****************************************************************************
+ * Included Files
+ ****************************************************************************/
+
+#include <arch/board/board.h>
+#include <nuttx/config.h>
+
+#include <nuttx/arch.h>
+#include <nuttx/clock.h>
+#include <nuttx/power/pm.h>
+
+#include <debug.h>
+#include <nuttx/rtc.h>
+#include <arch/irq.h>
+
+#include "up_internal.h"
+#include "stm32_pm.h"
+#include "stm32_rcc.h"
+#include "stm32_exti.h"
+
+#include "stm32f4discovery.h"
+
+/****************************************************************************
+ * Pre-processor Definitions
+ ****************************************************************************/
+/* Configuration ************************************************************/
+/* Does the board support an IDLE LED to indicate that the board is in the
+ * IDLE state?
+ */
+
+#if defined(CONFIG_ARCH_LEDS) && defined(LED_IDLE)
+#  define BEGIN_IDLE() board_led_on(LED_IDLE)
+#  define END_IDLE()   board_led_off(LED_IDLE)
+#else
+#  define BEGIN_IDLE()
+#  define END_IDLE()
+#endif
+
+/* Values for the RTC Alarm to wake up from the PM_STANDBY mode */
+
+#ifndef CONFIG_PM_ALARM_SEC
+#  define CONFIG_PM_ALARM_SEC 3
+#endif
+
+#ifndef CONFIG_PM_ALARM_NSEC
+#  define CONFIG_PM_ALARM_NSEC 0
+#endif
+
+/****************************************************************************
+ * Private Data
+ ****************************************************************************/
+
+#if defined(CONFIG_PM) && defined(CONFIG_RTC_ALARM)
+static void up_alarmcb(void);
+#endif
+
+/****************************************************************************
+ * Private Functions
+ ****************************************************************************/
+
+/****************************************************************************
+ * Name: stm32_idlepm
+ *
+ * Description:
+ *   Perform IDLE state power management.
+ *
+ ****************************************************************************/
+
+#ifdef CONFIG_PM
+static void stm32_idlepm(void)
+{
+#ifdef CONFIG_RTC_ALARM
+  struct timespec alarmtime;
+#endif
+  static enum pm_state_e oldstate = PM_NORMAL;
+  enum pm_state_e newstate;
+  irqstate_t flags;
+  int ret;
+
+  /* Decide, which power saving level can be obtained */
+
+  newstate = pm_checkstate();
+
+  /* Check for state changes */
+
+  if (newstate != oldstate)
+    {
+      lldbg("newstate= %d oldstate=%d\n", newstate, oldstate);
+
+      flags = irqsave();
+
+      /* Force the global state change */
+
+      ret = pm_changestate(newstate);
+      if (ret < 0)
+        {
+          /* The new state change failed, revert to the preceding state */
+
+          (void)pm_changestate(oldstate);
+
+          /* No state change... */
+
+          goto errout;
+        }
+
+      /* Then perform board-specific, state-dependent logic here */
+
+      switch (newstate)
+        {
+        case PM_NORMAL:
+          {
+          }
+          break;
+
+        case PM_IDLE:
+          {
+          }
+          break;
+
+        case PM_STANDBY:
+          {
+#ifdef CONFIG_RTC_ALARM
+            /* Disable RTC Alarm interrupt */
+
+#warning "missing logic"
+
+            /* Configure the RTC alarm to Auto Wake the system */
+
+#warning "missing logic"
+
+            /* The tv_nsec value must not exceed 1,000,000,000. That
+             * would be an invalid time.
+             */
+
+#warning "missing logic"
+
+            /* Set the alarm */
+
+#warning "missing logic"
+#endif
+            /* Call the STM32 stop mode */
+
+            stm32_pmstop(true);
+
+            /* We have been re-awakened by some even:  A button press?
+             * An alarm?  Cancel any pending alarm and resume the normal
+             * operation.
+             */
+
+#ifdef CONFIG_RTC_ALARM
+#warning "missing logic"
+#endif
+            /* Resume normal operation */
+
+            pm_changestate(PM_NORMAL);
+            newstate = PM_NORMAL;
+          }
+          break;
+
+        case PM_SLEEP:
+          {
+            /* We should not return from standby mode.  The only way out
+             * of standby is via the reset path.
+             */
+
+            (void)stm32_pmstandby();
+          }
+          break;
+
+        default:
+          break;
+        }
+
+      /* Save the new state */
+
+      oldstate = newstate;
+
+errout:
+      irqrestore(flags);
+    }
+}
+#else
+#  define stm32_idlepm()
+#endif
+
+/************************************************************************************
+ * Name: up_alarmcb
+ *
+ * Description:
+ *    RTC alarm service routine
+ *
+ ************************************************************************************/
+
+#if defined(CONFIG_PM) && defined(CONFIG_RTC_ALARM)
+static void up_alarmcb(void)
+{
+  /* This alarm occurs because there wasn't any EXTI interrupt during the
+   * PM_STANDBY period. So just go to sleep.
+   */
+
+  pm_changestate(PM_SLEEP);
+}
+#endif
+
+/****************************************************************************
+ * Public Functions
+ ****************************************************************************/
+
+/****************************************************************************
+ * Name: up_idle
+ *
+ * Description:
+ *   up_idle() is the logic that will be executed when their is no other
+ *   ready-to-run task.  This is processor idle time and will continue until
+ *   some interrupt occurs to cause a context switch from the idle task.
+ *
+ *   Processing in this state may be processor-specific. e.g., this is where
+ *   power management operations might be performed.
+ *
+ ****************************************************************************/
+
+void up_idle(void)
+{
+#if defined(CONFIG_SUPPRESS_INTERRUPTS) || defined(CONFIG_SUPPRESS_TIMER_INTS)
+  /* If the system is idle and there are no timer interrupts, then process
+   * "fake" timer interrupts. Hopefully, something will wake up.
+   */
+
+  sched_process_timer();
+#else
+
+  /* Perform IDLE mode power management */
+
+  BEGIN_IDLE();
+  stm32_idlepm();
+  END_IDLE();
+#endif
+}
+
diff --git a/nuttx/configs/px4fmu-v2/src/stm32_nsh.c b/nuttx/configs/px4fmu-v2/src/stm32_nsh.c
new file mode 100644
index 000000000..037fced44
--- /dev/null
+++ b/nuttx/configs/px4fmu-v2/src/stm32_nsh.c
@@ -0,0 +1,76 @@
+/****************************************************************************
+ * config/stm32f4discovery/src/stm32_nsh.c
+ *
+ *   Copyright (C) 2012, 2014 Gregory Nutt. All rights reserved.
+ *   Author: Gregory Nutt <gnutt@nuttx.org>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name NuttX nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ****************************************************************************/
+
+/****************************************************************************
+ * Included Files
+ ****************************************************************************/
+
+#include <nuttx/config.h>
+
+#include "stm32f4discovery.h"
+
+/****************************************************************************
+ * Pre-Processor Definitions
+ ****************************************************************************/
+
+#ifndef OK
+#  define OK 0
+#endif
+
+/****************************************************************************
+ * Public Functions
+ ****************************************************************************/
+
+/****************************************************************************
+ * Name: nsh_archinitialize
+ *
+ * Description:
+ *   Perform architecture-specific initialization (if this was not already
+ *   done by board_initialize();
+ *
+ ****************************************************************************/
+
+int nsh_archinitialize(void)
+{
+#ifdef CONFIG_BOARD_INITIALIZE
+  /* Board initialization already performed by board_initialize() */
+
+  return OK;
+#else
+  /* Perform board-specific initialization */
+
+  return stm32_bringup();
+#endif
+}
diff --git a/nuttx/configs/px4fmu-v2/src/stm32_pm.c b/nuttx/configs/px4fmu-v2/src/stm32_pm.c
new file mode 100644
index 000000000..761061a28
--- /dev/null
+++ b/nuttx/configs/px4fmu-v2/src/stm32_pm.c
@@ -0,0 +1,106 @@
+/****************************************************************************
+ * configs/stm32f4discovery/src/stm32_pm.c
+ *
+ *   Copyright (C) 2012 Gregory Nutt. All rights reserved.
+ *   Authors: Gregory Nutt <gnutt@nuttx.org>
+ *            Diego Sanchez <dsanchez@nx-engineering.com>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name NuttX nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ****************************************************************************/
+
+/****************************************************************************
+ * Included Files
+ ****************************************************************************/
+
+#include <nuttx/config.h>
+
+#include <nuttx/power/pm.h>
+
+#include "up_internal.h"
+#include "stm32_pm.h"
+#include "stm32f4discovery.h"
+
+#ifdef CONFIG_PM
+
+/****************************************************************************
+ * Pre-processor Definitions
+ ****************************************************************************/
+
+/****************************************************************************
+ * Private Data
+ ****************************************************************************/
+
+/****************************************************************************
+ * Public Data
+ ****************************************************************************/
+
+/****************************************************************************
+ * Private Functions
+ ****************************************************************************/
+
+/****************************************************************************
+ * Public Functions
+ ****************************************************************************/
+
+/****************************************************************************
+ * Name: stm32_pminitialize
+ *
+ * Description:
+ *   This function is called by MCU-specific logic at power-on reset in
+ *   order to provide one-time initialization the power management subystem.
+ *   This function must be called *very* early in the initializeation sequence
+ *   *before* any other device drivers are initialized (since they may
+ *   attempt to register with the power management subsystem).
+ *
+ * Input parameters:
+ *   None.
+ *
+ * Returned value:
+ *    None.
+ *
+ ****************************************************************************/
+
+void up_pminitialize(void)
+{
+  /* Then initialize the NuttX power management subsystem proper */
+
+  pm_initialize();
+
+#if defined(CONFIG_ARCH_IDLE_CUSTOM) && defined(CONFIG_PM_BUTTONS)
+  /* Initialize the buttons to wake up the system from low power modes */
+
+  stm32_pm_buttons();
+#endif
+
+  /* Initialize the LED PM */
+
+  stm32_led_pminitialize();
+}
+
+#endif /* CONFIG_PM */
diff --git a/nuttx/configs/px4fmu-v2/src/stm32_pmbuttons.c b/nuttx/configs/px4fmu-v2/src/stm32_pmbuttons.c
new file mode 100644
index 000000000..b060e9a55
--- /dev/null
+++ b/nuttx/configs/px4fmu-v2/src/stm32_pmbuttons.c
@@ -0,0 +1,148 @@
+/****************************************************************************
+ * configs/stm32f4discovery/src/stm32_pm_buttons.c
+ *
+ *   Copyright (C) 2012 Gregory Nutt. All rights reserved.
+ *   Authors: Gregory Nutt <gnutt@nuttx.org>
+ *            Diego Sanchez <dsanchez@nx-engineering.com>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name NuttX nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ****************************************************************************/
+
+/****************************************************************************
+ * Included Files
+ ****************************************************************************/
+
+#include <arch/board/board.h>
+#include <nuttx/config.h>
+
+#include <nuttx/power/pm.h>
+#include <arch/irq.h>
+#include <stdbool.h>
+#include <debug.h>
+
+#include "up_arch.h"
+#include "nvic.h"
+#include "stm32_pwr.h"
+#include "stm32_pm.h"
+#include "stm32f4discovery.h"
+
+#if defined(CONFIG_PM) && defined(CONFIG_ARCH_IDLE_CUSTOM) && defined(CONFIG_PM_BUTTONS)
+
+/****************************************************************************
+ * Pre-processor Definitions
+ ****************************************************************************/
+/* Configuration ************************************************************/
+
+#ifndef CONFIG_ARCH_BUTTONS
+#  error "CONFIG_ARCH_BUTTONS is not defined in the configuration"
+#endif
+
+#ifndef CONFIG_ARCH_IRQBUTTONS
+#  warning "CONFIG_ARCH_IRQBUTTONS is not defined in the configuration"
+#endif
+
+#ifndef CONFIG_PM_BUTTON_ACTIVITY
+#  define CONFIG_PM_BUTTON_ACTIVITY 10
+#endif
+
+/****************************************************************************
+ * Private Types
+ ****************************************************************************/
+
+/****************************************************************************
+ * Private Function Prototypes
+ ****************************************************************************/
+
+#ifdef CONFIG_ARCH_IRQBUTTONS
+static int button_handler(int irq, FAR void *context);
+#endif /* CONFIG_ARCH_IRQBUTTONS */
+
+/****************************************************************************
+ * Private Data
+ ****************************************************************************/
+
+/****************************************************************************
+ * Private Functions
+ ****************************************************************************/
+
+/****************************************************************************
+ * Name: button_handler
+ *
+ * Description:
+ *   Handle a button wake-up interrupt
+ *
+ ****************************************************************************/
+
+#ifdef CONFIG_ARCH_IRQBUTTONS
+static int button_handler(int irq, FAR void *context)
+{
+  /* At this point the MCU should have already awakened.  The state
+   * change will be handled in the IDLE loop when the system is re-awakened
+   * The button interrupt handler should be totally ignorant of the PM
+   * activities and should report button activity as if nothing
+   * special happened.
+   */
+
+  pm_activity(CONFIG_PM_BUTTON_ACTIVITY);
+  return OK;
+}
+#endif /* CONFIG_ARCH_IRQBUTTONS */
+
+/****************************************************************************
+ * Public Functions
+ ****************************************************************************/
+
+/****************************************************************************
+ * Name: stm32_pm_buttons
+ *
+ * Description:
+ *   Configure the user button of the STM32f4discovery board as EXTI,
+ *   so it is able to wakeup the MCU from the PM_STANDBY mode
+ *
+ ****************************************************************************/
+
+void stm32_pm_buttons(void)
+{
+  /* Initialize the button GPIOs */
+
+  board_button_initialize();
+
+#ifdef CONFIG_ARCH_IRQBUTTONS
+      xcpt_t oldhandler = board_button_irq(0, button_handler);
+
+      if (oldhandler != NULL)
+        {
+          lowsyslog(LOG_WARNING, "WARNING: oldhandler:%p is not NULL!  "
+                   "Button events may be lost or aliased!\n",
+                   oldhandler);
+        }
+#endif
+}
+
+#endif /* CONFIG_PM && CONFIG_ARCH_IDLE_CUSTOM && CONFIG_PM_BUTTONS)*/
diff --git a/nuttx/configs/px4fmu-v2/src/stm32_pwm.c b/nuttx/configs/px4fmu-v2/src/stm32_pwm.c
new file mode 100644
index 000000000..7ef3584be
--- /dev/null
+++ b/nuttx/configs/px4fmu-v2/src/stm32_pwm.c
@@ -0,0 +1,141 @@
+/************************************************************************************
+ * configs/stm32f4discovery/src/stm32_pwm.c
+ *
+ *   Copyright (C) 2011 Gregory Nutt. All rights reserved.
+ *   Author: Gregory Nutt <gnutt@nuttx.org>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name NuttX nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ************************************************************************************/
+
+/************************************************************************************
+ * Included Files
+ ************************************************************************************/
+
+#include <nuttx/config.h>
+
+#include <errno.h>
+#include <debug.h>
+
+#include <nuttx/pwm.h>
+#include <arch/board/board.h>
+
+#include "chip.h"
+#include "up_arch.h"
+#include "stm32_pwm.h"
+#include "stm32f4discovery.h"
+
+/************************************************************************************
+ * Definitions
+ ************************************************************************************/
+/* Configuration *******************************************************************/
+/* PWM
+ *
+ * The stm32f4discovery has no real on-board PWM devices, but the board can be configured to output
+ * a pulse train using TIM4 CH2.  This pin is used by FSMC is connect to CN5 just for this
+ * purpose:
+ *
+ * PD13 FSMC_A18 / MC_TIM4_CH2OUT pin 33 (EnB)
+ *
+ * FSMC must be disabled in this case!
+ */
+
+#define HAVE_PWM 1
+
+#ifndef CONFIG_PWM
+#  undef HAVE_PWM
+#endif
+
+#ifndef CONFIG_STM32_TIM4
+#  undef HAVE_PWM
+#endif
+
+#ifndef CONFIG_STM32_TIM4_PWM
+#  undef HAVE_PWM
+#endif
+
+#if CONFIG_STM32_TIM4_CHANNEL != STM32F4DISCOVERY_PWMCHANNEL
+#  undef HAVE_PWM
+#endif
+
+#ifdef HAVE_PWM
+
+/************************************************************************************
+ * Private Functions
+ ************************************************************************************/
+
+/************************************************************************************
+ * Public Functions
+ ************************************************************************************/
+
+/************************************************************************************
+ * Name: pwm_devinit
+ *
+ * Description:
+ *   All STM32 architectures must provide the following interface to work with
+ *   examples/pwm.
+ *
+ ************************************************************************************/
+
+int pwm_devinit(void)
+{
+  static bool initialized = false;
+  struct pwm_lowerhalf_s *pwm;
+  int ret;
+
+  /* Have we already initialized? */
+
+  if (!initialized)
+    {
+      /* Call stm32_pwminitialize() to get an instance of the PWM interface */
+
+      pwm = stm32_pwminitialize(STM32F4DISCOVERY_PWMTIMER);
+      if (!pwm)
+        {
+          dbg("Failed to get the STM32 PWM lower half\n");
+          return -ENODEV;
+        }
+
+      /* Register the PWM driver at "/dev/pwm0" */
+
+      ret = pwm_register("/dev/pwm0", pwm);
+      if (ret < 0)
+        {
+          adbg("pwm_register failed: %d\n", ret);
+          return ret;
+        }
+
+      /* Now we are initialized */
+
+      initialized = true;
+    }
+
+  return OK;
+}
+
+#endif /* HAVE_PWM */
diff --git a/nuttx/configs/px4fmu-v2/src/stm32_qencoder.c b/nuttx/configs/px4fmu-v2/src/stm32_qencoder.c
new file mode 100644
index 000000000..850da62d9
--- /dev/null
+++ b/nuttx/configs/px4fmu-v2/src/stm32_qencoder.c
@@ -0,0 +1,186 @@
+/************************************************************************************
+ * configs/stm32f4discovery/src/stm32_qencoder.c
+ *
+ *   Copyright (C) 2012 Gregory Nutt. All rights reserved.
+ *   Author: Gregory Nutt <gnutt@nuttx.org>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name NuttX nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ************************************************************************************/
+
+/************************************************************************************
+ * Included Files
+ ************************************************************************************/
+
+#include <nuttx/config.h>
+
+#include <errno.h>
+#include <debug.h>
+
+#include <nuttx/sensors/qencoder.h>
+#include <arch/board/board.h>
+
+#include "chip.h"
+#include "up_arch.h"
+#include "stm32_qencoder.h"
+#include "stm32f4discovery.h"
+
+/************************************************************************************
+ * Definitions
+ ************************************************************************************/
+/* Configuration *******************************************************************/
+/* Check if we have a timer configured for quadrature encoder -- assume YES. */
+
+#define HAVE_QENCODER 1
+
+/* If TIMn is not enabled (via CONFIG_STM32_TIMn), then the configuration cannot
+ * specify TIMn as a quadrature encoder (via CONFIG_STM32_TIMn_QE).
+ */
+
+#ifndef CONFIG_STM32_TIM1
+#  undef CONFIG_STM32_TIM1_QE
+#endif
+#ifndef CONFIG_STM32_TIM2
+#  undef CONFIG_STM32_TIM2_QE
+#endif
+#ifndef CONFIG_STM32_TIM3
+#  undef CONFIG_STM32_TIM3_QE
+#endif
+#ifndef CONFIG_STM32_TIM4
+#  undef CONFIG_STM32_TIM4_QE
+#endif
+#ifndef CONFIG_STM32_TIM5
+#  undef CONFIG_STM32_TIM5_QE
+#endif
+#ifndef CONFIG_STM32_TIM8
+#  undef CONFIG_STM32_TIM8_QE
+#endif
+
+/* If the upper-half quadrature encoder driver is not enabled, then we cannot
+ * support the quadrature encoder.
+ */
+
+#ifndef CONFIG_QENCODER
+#  undef HAVE_QENCODER
+#endif
+
+/* Which Timer should we use, TIMID={1,2,3,4,5,8}.  If multiple timers are
+ * configured as quadrature encoders, this logic will arbitrarily select
+ * the lowest numbered timer.
+ *
+ * At least one TIMn, n={1,2,3,4,5,8}, must be both enabled and configured
+ * as a quadrature encoder in order to support the lower half quadrature
+ * encoder driver.  The above check assures that if CONFIG_STM32_TIMn_QE
+ * is defined, then the correspdonding TIMn is also enabled.
+ */
+
+#if defined CONFIG_STM32_TIM1_QE
+#  define TIMID 1
+#elif defined CONFIG_STM32_TIM2_QE
+#  define TIMID 2
+#elif defined CONFIG_STM32_TIM3_QE
+#  define TIMID 3
+#elif defined CONFIG_STM32_TIM4_QE
+#  define TIMID 4
+#elif defined CONFIG_STM32_TIM5_QE
+#  define TIMID 5
+#elif defined CONFIG_STM32_TIM8_QE
+#  define TIMID 8
+#else
+#  undef HAVE_QENCODER
+#endif
+
+#ifdef HAVE_QENCODER
+
+/* Debug ***************************************************************************/
+/* Non-standard debug that may be enabled just for testing the quadrature encoder */
+
+#ifndef CONFIG_DEBUG
+#  undef CONFIG_DEBUG_QENCODER
+#endif
+
+#ifdef CONFIG_DEBUG_QENCODER
+#  define qedbg                 dbg
+#  define qelldbg               lldbg
+#  ifdef CONFIG_DEBUG_VERBOSE
+#    define qevdbg              vdbg
+#    define qellvdbg            llvdbg
+#  else
+#    define qevdbg(x...)
+#    define qellvdbg(x...)
+#  endif
+#else
+#  define qedbg(x...)
+#  define qelldbg(x...)
+#  define qevdbg(x...)
+#  define qellvdbg(x...)
+#endif
+
+/************************************************************************************
+ * Private Functions
+ ************************************************************************************/
+
+/************************************************************************************
+ * Public Functions
+ ************************************************************************************/
+
+/************************************************************************************
+ * Name: qe_devinit
+ *
+ * Description:
+ *   All STM32 architectures must provide the following interface to work with
+ *   examples/qencoder.
+ *
+ ************************************************************************************/
+
+int qe_devinit(void)
+{
+  static bool initialized = false;
+  int ret;
+
+  /* Check if we are already initialized */
+
+  if (!initialized)
+    {
+      /* Initialize a quadrature encoder interface. */
+
+      qevdbg("Initializing the quadrature encoder using TIM%d\n", TIMID);
+      ret = stm32_qeinitialize("/dev/qe0", TIMID);
+      if (ret < 0)
+        {
+          qedbg("stm32_qeinitialize failed: %d\n", ret);
+          return ret;
+        }
+
+      initialized = true;
+    }
+
+  return OK;
+}
+
+#endif /* HAVE_QENCODER */
diff --git a/nuttx/configs/px4fmu-v2/src/stm32_sdio.c b/nuttx/configs/px4fmu-v2/src/stm32_sdio.c
new file mode 100644
index 000000000..4148caf79
--- /dev/null
+++ b/nuttx/configs/px4fmu-v2/src/stm32_sdio.c
@@ -0,0 +1,175 @@
+/****************************************************************************
+ * config/stm32f4discovery/src/stm32_sdio.c
+ *
+ *   Copyright (C) 2014 Gregory Nutt. All rights reserved.
+ *   Author: Gregory Nutt <gnutt@nuttx.org>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name NuttX nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ****************************************************************************/
+
+/****************************************************************************
+ * Included Files
+ ****************************************************************************/
+
+#include <nuttx/config.h>
+
+#include <stdbool.h>
+#include <stdio.h>
+#include <debug.h>
+#include <errno.h>
+
+#include <nuttx/sdio.h>
+#include <nuttx/mmcsd.h>
+
+#include "stm32.h"
+#include "stm32f4discovery.h"
+
+#ifdef HAVE_SDIO
+
+/****************************************************************************
+ * Pre-Processor Definitions
+ ****************************************************************************/
+/* Configuration ************************************************************/
+
+/* Card detections requires card support and a card detection GPIO */
+
+#define HAVE_NCD   1
+#if !defined(HAVE_SDIO) || !defined(GPIO_SDIO_NCD)
+#  undef HAVE_NCD
+#endif
+
+/****************************************************************************
+ * Private Data
+ ****************************************************************************/
+
+static FAR struct sdio_dev_s *g_sdio_dev;
+#ifdef HAVE_NCD
+static bool g_sd_inserted = 0xff; /* Impossible value */
+#endif
+
+/****************************************************************************
+ * Private Functions
+ ****************************************************************************/
+
+/****************************************************************************
+ * Name: stm32_ncd_interrupt
+ *
+ * Description:
+ *   Card detect interrupt handler.
+ *
+ ****************************************************************************/
+
+#ifdef HAVE_NCD
+static int stm32_ncd_interrupt(int irq, FAR void *context)
+{
+  bool present;
+
+  present = !stm32_gpioread(GPIO_SDIO_NCD);
+  if (present != g_sd_inserted)
+    {
+      sdio_mediachange(g_sdio_dev, present);
+      g_sd_inserted = present;
+    }
+
+  return OK;
+}
+#endif
+
+/****************************************************************************
+ * Public Functions
+ ****************************************************************************/
+
+/****************************************************************************
+ * Name: stm32_sdio_initialize
+ *
+ * Description:
+ *   Initialize SDIO-based MMC/SD card support
+ *
+ ****************************************************************************/
+
+int stm32_sdio_initialize(void)
+{
+  int ret;
+
+#ifdef HAVE_NCD
+  /* Card detect */
+
+  bool cd_status;
+
+  /* Configure the card detect GPIO */
+
+  stm32_configgpio(GPIO_SDIO_NCD);
+
+  /* Register an interrupt handler for the card detect pin */
+
+  stm32_gpiosetevent(GPIO_SDIO_NCD, true, true, true, stm32_ncd_interrupt);
+#endif
+
+  /* Mount the SDIO-based MMC/SD block driver */
+  /* First, get an instance of the SDIO interface */
+
+  fvdbg("Initializing SDIO slot %d\n", SDIO_SLOTNO);
+
+  g_sdio_dev = sdio_initialize(SDIO_SLOTNO);
+  if (!g_sdio_dev)
+    {
+      fdbg("Failed to initialize SDIO slot %d\n", SDIO_SLOTNO);
+      return -ENODEV;
+    }
+
+  /* Now bind the SDIO interface to the MMC/SD driver */
+
+  fvdbg("Bind SDIO to the MMC/SD driver, minor=%d\n", SDIO_MINOR);
+
+  ret = mmcsd_slotinitialize(SDIO_MINOR, g_sdio_dev);
+  if (ret != OK)
+    {
+      fdbg("Failed to bind SDIO to the MMC/SD driver: %d\n", ret);
+      return ret;
+    }
+
+  fvdbg("Successfully bound SDIO to the MMC/SD driver\n");
+
+#ifdef HAVE_NCD
+  /* Use SD card detect pin to check if a card is g_sd_inserted */
+
+  cd_status = !stm32_gpioread(GPIO_SDIO_NCD);
+  fvdbg("Card detect : %d\n", cd_status);
+
+  sdio_mediachange(g_sdio_dev, cd_status);
+#else
+  /* Assume that the SD card is inserted.  What choice do we have? */
+
+  sdio_mediachange(g_sdio_dev, true);
+#endif
+
+  return OK;
+}
+
+#endif /* HAVE_SDIO */
diff --git a/nuttx/configs/px4fmu-v2/src/stm32_spi.c b/nuttx/configs/px4fmu-v2/src/stm32_spi.c
new file mode 100644
index 000000000..201c5412b
--- /dev/null
+++ b/nuttx/configs/px4fmu-v2/src/stm32_spi.c
@@ -0,0 +1,250 @@
+/************************************************************************************
+ * configs/stm32f4discovery/src/stm32_spi.c
+ *
+ *   Copyright (C) 2011-2012 Gregory Nutt. All rights reserved.
+ *   Author: Gregory Nutt <gnutt@nuttx.org>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name NuttX nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ************************************************************************************/
+
+/************************************************************************************
+ * Included Files
+ ************************************************************************************/
+
+#include <nuttx/config.h>
+
+#include <stdint.h>
+#include <stdbool.h>
+#include <errno.h>
+#include <debug.h>
+
+#include <nuttx/spi/spi.h>
+#include <arch/board/board.h>
+
+#include "up_arch.h"
+#include "chip.h"
+#include "stm32.h"
+#include "stm32f4discovery.h"
+
+#if defined(CONFIG_STM32_SPI1) || defined(CONFIG_STM32_SPI2) || defined(CONFIG_STM32_SPI3)
+
+/************************************************************************************
+ * Definitions
+ ************************************************************************************/
+
+/* Enables debug output from this file (needs CONFIG_DEBUG too) */
+
+#undef SPI_DEBUG   /* Define to enable debug */
+#undef SPI_VERBOSE /* Define to enable verbose debug */
+
+#ifdef SPI_DEBUG
+#  define spidbg  lldbg
+#  ifdef SPI_VERBOSE
+#    define spivdbg lldbg
+#  else
+#    define spivdbg(x...)
+#  endif
+#else
+#  undef SPI_VERBOSE
+#  define spidbg(x...)
+#  define spivdbg(x...)
+#endif
+
+/************************************************************************************
+ * Private Functions
+ ************************************************************************************/
+
+/************************************************************************************
+ * Public Functions
+ ************************************************************************************/
+
+/************************************************************************************
+ * Name: stm32_spiinitialize
+ *
+ * Description:
+ *   Called to configure SPI chip select GPIO pins for the stm32f4discovery board.
+ *
+ ************************************************************************************/
+
+void weak_function stm32_spiinitialize(void)
+{
+#ifdef CONFIG_STM32_SPI1
+  (void)stm32_configgpio(GPIO_CS_MEMS);    /* MEMS chip select */
+#endif
+#if defined(CONFIG_LCD_UG2864AMBAG01) || defined(CONFIG_LCD_UG2864HSWEG01)
+  (void)stm32_configgpio(GPIO_OLED_CS);    /* OLED chip select */
+# if defined(CONFIG_LCD_UG2864AMBAG01)
+  (void)stm32_configgpio(GPIO_OLED_A0);    /* OLED Command/Data */
+# endif
+# if defined(CONFIG_LCD_UG2864HSWEG01)
+  (void)stm32_configgpio(GPIO_OLED_DC);    /* OLED Command/Data */
+# endif
+#endif
+}
+
+/****************************************************************************
+ * Name:  stm32_spi1/2/3select and stm32_spi1/2/3status
+ *
+ * Description:
+ *   The external functions, stm32_spi1/2/3select and stm32_spi1/2/3status must be
+ *   provided by board-specific logic.  They are implementations of the select
+ *   and status methods of the SPI interface defined by struct spi_ops_s (see
+ *   include/nuttx/spi/spi.h). All other methods (including up_spiinitialize())
+ *   are provided by common STM32 logic.  To use this common SPI logic on your
+ *   board:
+ *
+ *   1. Provide logic in stm32_boardinitialize() to configure SPI chip select
+ *      pins.
+ *   2. Provide stm32_spi1/2/3select() and stm32_spi1/2/3status() functions in your
+ *      board-specific logic.  These functions will perform chip selection and
+ *      status operations using GPIOs in the way your board is configured.
+ *   3. Add a calls to up_spiinitialize() in your low level application
+ *      initialization logic
+ *   4. The handle returned by up_spiinitialize() may then be used to bind the
+ *      SPI driver to higher level logic (e.g., calling
+ *      mmcsd_spislotinitialize(), for example, will bind the SPI driver to
+ *      the SPI MMC/SD driver).
+ *
+ ****************************************************************************/
+
+#ifdef CONFIG_STM32_SPI1
+void stm32_spi1select(FAR struct spi_dev_s *dev, enum spi_dev_e devid, bool selected)
+{
+  spidbg("devid: %d CS: %s\n", (int)devid, selected ? "assert" : "de-assert");
+
+#if defined(CONFIG_LCD_UG2864AMBAG01) || defined(CONFIG_LCD_UG2864HSWEG01)
+  if (devid == SPIDEV_DISPLAY)
+    {
+      stm32_gpiowrite(GPIO_OLED_CS, !selected);
+    }
+  else
+#endif
+    {
+      stm32_gpiowrite(GPIO_CS_MEMS, !selected);
+    }
+}
+
+uint8_t stm32_spi1status(FAR struct spi_dev_s *dev, enum spi_dev_e devid)
+{
+  return 0;
+}
+#endif
+
+#ifdef CONFIG_STM32_SPI2
+void stm32_spi2select(FAR struct spi_dev_s *dev, enum spi_dev_e devid, bool selected)
+{
+  spidbg("devid: %d CS: %s\n", (int)devid, selected ? "assert" : "de-assert");
+}
+
+uint8_t stm32_spi2status(FAR struct spi_dev_s *dev, enum spi_dev_e devid)
+{
+  return 0;
+}
+#endif
+
+#ifdef CONFIG_STM32_SPI3
+void stm32_spi3select(FAR struct spi_dev_s *dev, enum spi_dev_e devid, bool selected)
+{
+  spidbg("devid: %d CS: %s\n", (int)devid, selected ? "assert" : "de-assert");
+}
+
+uint8_t stm32_spi3status(FAR struct spi_dev_s *dev, enum spi_dev_e devid)
+{
+  return 0;
+}
+#endif
+
+/****************************************************************************
+ * Name: stm32_spi1cmddata
+ *
+ * Description:
+ *   Set or clear the SH1101A A0 or SD1306 D/C n bit to select data (true)
+ *   or command (false). This function must be provided by platform-specific
+ *   logic. This is an implementation of the cmddata method of the SPI
+ *   interface defined by struct spi_ops_s (see include/nuttx/spi/spi.h).
+ *
+ * Input Parameters:
+ *
+ *   spi - SPI device that controls the bus the device that requires the CMD/
+ *         DATA selection.
+ *   devid - If there are multiple devices on the bus, this selects which one
+ *         to select cmd or data.  NOTE:  This design restricts, for example,
+ *         one one SPI display per SPI bus.
+ *   cmd - true: select command; false: select data
+ *
+ * Returned Value:
+ *   None
+ *
+ ****************************************************************************/
+
+#ifdef CONFIG_SPI_CMDDATA
+#ifdef CONFIG_STM32_SPI1
+int stm32_spi1cmddata(FAR struct spi_dev_s *dev, enum spi_dev_e devid, bool cmd)
+{
+#if defined(CONFIG_LCD_UG2864AMBAG01) || defined(CONFIG_LCD_UG2864HSWEG01)
+  if (devid == SPIDEV_DISPLAY)
+    {
+      /* "This is the Data/Command control pad which determines whether the
+       *  data bits are data or a command.
+       *
+       *  A0 = "H": the inputs at D0 to D7 are treated as display data.
+       *  A0 = "L": the inputs at D0 to D7 are transferred to the command
+       *       registers."
+       */
+
+# if defined(CONFIG_LCD_UG2864AMBAG01)
+      (void)stm32_gpiowrite(GPIO_OLED_A0, !cmd);
+# endif
+# if defined(CONFIG_LCD_UG2864HSWEG01)
+      (void)stm32_gpiowrite(GPIO_OLED_DC, !cmd);
+# endif
+      return OK;
+    }
+#endif
+
+  return -ENODEV;
+}
+#endif
+
+#ifdef CONFIG_STM32_SPI2
+int stm32_spi2cmddata(FAR struct spi_dev_s *dev, enum spi_dev_e devid, bool cmd)
+{
+  return -ENODEV;
+}
+#endif
+
+#ifdef CONFIG_STM32_SPI3
+int stm32_spi3cmddata(FAR struct spi_dev_s *dev, enum spi_dev_e devid, bool cmd)
+{
+  return -ENODEV;
+}
+#endif
+#endif /* CONFIG_SPI_CMDDATA */
+
+#endif /* CONFIG_STM32_SPI1 || CONFIG_STM32_SPI2 */
diff --git a/nuttx/configs/px4fmu-v2/src/stm32_ssd1289.c b/nuttx/configs/px4fmu-v2/src/stm32_ssd1289.c
new file mode 100644
index 000000000..74c6ee22e
--- /dev/null
+++ b/nuttx/configs/px4fmu-v2/src/stm32_ssd1289.c
@@ -0,0 +1,424 @@
+/**************************************************************************************
+ * configs/stm32fdiscover/src/stm32_ssd1289.c
+ *
+ * This logic supports the connection of an SSD1289-based LCD to the STM32F4Discovery
+ * board.
+ *
+ *   Copyright (C) 2012 Gregory Nutt. All rights reserved.
+ *   Authors: Gregory Nutt <gnutt@nuttx.org>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name NuttX nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ **************************************************************************************/
+
+/**************************************************************************************
+ * Included Files
+ **************************************************************************************/
+
+#include <nuttx/config.h>
+
+#include <sys/types.h>
+#include <stdint.h>
+#include <stdbool.h>
+#include <string.h>
+#include <errno.h>
+#include <debug.h>
+
+#include <nuttx/arch.h>
+#include <nuttx/spi/spi.h>
+#include <nuttx/lcd/lcd.h>
+#include <nuttx/lcd/ssd1289.h>
+
+#include <arch/board/board.h>
+
+#include "up_arch.h"
+#include "stm32.h"
+#include "stm32f4discovery.h"
+
+#ifdef CONFIG_LCD_SSD1289
+
+/**************************************************************************************
+ * Pre-processor Definitions
+ **************************************************************************************/
+/* Configuration **********************************************************************/
+
+#ifndef CONFIG_STM32_FSMC
+#  error "CONFIG_STM32_FSMC is required to use the LCD"
+#endif
+
+/* Define CONFIG_DEBUG_LCD to enable detailed LCD debug output. Verbose debug must
+ * also be enabled.
+ */
+
+#ifndef CONFIG_DEBUG
+#  undef CONFIG_DEBUG_VERBOSE
+#  undef CONFIG_DEBUG_GRAPHICS
+#  undef CONFIG_DEBUG_LCD
+#endif
+
+#ifndef CONFIG_DEBUG_VERBOSE
+#  undef CONFIG_DEBUG_LCD
+#endif
+
+/* STM32F4Discovery LCD Hardware Definitions ******************************************/
+/* LCD /CS is CE1 ==  NOR/SRAM Bank 1
+ *
+ * Bank 1 = 0x60000000 | 0x00000000
+ * Bank 2 = 0x60000000 | 0x04000000
+ * Bank 3 = 0x60000000 | 0x08000000
+ * Bank 4 = 0x60000000 | 0x0c000000
+ *
+ * FSMC address bit 16 is used to distinguish command and data.  FSMC address bits
+ * 0-24 correspond to ARM address bits 1-25.
+ */
+
+#define STM32_LCDBASE ((uintptr_t)(0x60000000 | 0x00000000))
+#define LCD_INDEX     (STM32_LCDBASE)
+#define LCD_DATA      (STM32_LCDBASE + 0x00020000)
+
+/* SRAM pin definitions */
+
+#define LCD_NADDRLINES   1   /* A16 */
+#define LCD_NDATALINES   16  /* D0-15 */
+
+/* Debug ******************************************************************************/
+
+#ifdef CONFIG_DEBUG_LCD
+#  define lcddbg         dbg
+#  define lcdvdbg        vdbg
+#else
+#  define lcddbg(x...)
+#  define lcdvdbg(x...)
+#endif
+
+/**************************************************************************************
+ * Private Type Definition
+ **************************************************************************************/
+
+/**************************************************************************************
+ * Private Function Protototypes
+ **************************************************************************************/
+/* Low Level LCD access */
+
+static void stm32_select(FAR struct ssd1289_lcd_s *dev);
+static void stm32_deselect(FAR struct ssd1289_lcd_s *dev);
+static void stm32_index(FAR struct ssd1289_lcd_s *dev, uint8_t index);
+#ifndef CONFIG_SSD1289_WRONLY
+static uint16_t stm32_read(FAR struct ssd1289_lcd_s *dev);
+#endif
+static void stm32_write(FAR struct ssd1289_lcd_s *dev, uint16_t data);
+static void stm32_backlight(FAR struct ssd1289_lcd_s *dev, int power);
+
+/**************************************************************************************
+ * Private Data
+ **************************************************************************************/
+/* LCD pin mapping (see configs/stm324discovery/README.txt
+ * MAPPING TO STM32 F4:
+ *
+ *  ---------------- ------------- ----------------------------------
+ *   STM32 FUNCTION  LCD PIN       STM32F4Discovery PIN
+ *  ---------------- ------------- ----------------------------------
+ *   FSMC_D0          D0    pin 4   PD14 P1 pin 46 Conflict (Note 1)
+ *   FSMC_D1          D1    pin 3   PD15 P1 pin 47 Conflict (Note 2)
+ *   FSMC_D2          D2    pin 6   PD0  P2 pin 36 Free I/O
+ *   FSMC_D3          D3    pin 5   PD1  P2 pin 33 Free I/O
+ *   FSMC_D4          D4    pin 8   PE7  P1 pin 25 Free I/O
+ *   FSMC_D5          D5    pin 7   PE8  P1 pin 26 Free I/O
+ *   FSMC_D6          D6    pin 10  PE9  P1 pin 27 Free I/O
+ *   FSMC_D7          D7    pin 9   PE10 P1 pin 28 Free I/O
+ *   FSMC_D8          D8    pin 12  PE11 P1 pin 29 Free I/O
+ *   FSMC_D9          D9    pin 11  PE12 P1 pin 30 Free I/O
+ *   FSMC_D10         D10   pin 14  PE13 P1 pin 31 Free I/O
+ *   FSMC_D11         D11   pin 13  PE14 P1 pin 32 Free I/O
+ *   FSMC_D12         D12   pin 16  PE15 P1 pin 33 Free I/O
+ *   FSMC_D13         D13   pin 15  PD8  P1 pin 40 Free I/O
+ *   FSMC_D14         D14   pin 18  PD9  P1 pin 41 Free I/O
+ *   FSMC_D15         D15   pin 17  PD10 P1 pin 42 Free I/O
+ *   FSMC_A16         RS    pin 19  PD11 P1 pin 27 Free I/O
+ *   FSMC_NE1         ~CS   pin 10  PD7  P2 pin 27 Free I/O
+ *   FSMC_NWE         ~WR   pin 22  PD5  P2 pin 29 Conflict (Note 3)
+ *   FSMC_NOE         ~RD   pin 21  PD4  P2 pin 32 Conflict (Note 4)
+ *   PC6              RESET pin 24  PC6  P2 pin 47 Free I/O
+ *  ---------------- ------------- ----------------------------------
+ *
+ *   1 Used for the RED LED
+ *   2 Used for the BLUE LED
+ *   3 Used for the RED LED and for OTG FS Overcurrent.  It may be okay to use
+ *     for the parallel interface if PC0 is held high (or floating).  PC0 enables
+ *     the STMPS2141STR IC power switch that drives the OTG FS host VBUS.
+ *   4 Also the reset pin for the CS43L22 audio Codec.
+ */
+
+#define GPIO_LCD_RESET (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_50MHz|\
+                        GPIO_OUTPUT_SET|GPIO_PORTC|GPIO_PIN6)
+
+/* GPIO configurations unique to the LCD  */
+
+static const uint32_t g_lcdconfig[] =
+{
+  /* PC6(RESET), FSMC_A16, FSMC_NOE, FSMC_NWE, and FSMC_NE1  */
+
+  GPIO_LCD_RESET, GPIO_FSMC_A16, GPIO_FSMC_NOE, GPIO_FSMC_NWE, GPIO_FSMC_NE1
+};
+#define NLCD_CONFIG (sizeof(g_lcdconfig)/sizeof(uint32_t))
+
+/* This is the driver state structure (there is no retained state information) */
+
+static struct ssd1289_lcd_s g_ssd1289 =
+{
+  .select    = stm32_select,
+  .deselect  = stm32_deselect,
+  .index     = stm32_index,
+#ifndef CONFIG_SSD1289_WRONLY
+  .read      = stm32_read,
+#endif
+  .write     = stm32_write,
+  .backlight = stm32_backlight
+};
+
+/* The saved instance of the LCD driver */
+
+static FAR struct lcd_dev_s *g_ssd1289drvr;
+
+/**************************************************************************************
+ * Private Functions
+ **************************************************************************************/
+
+/**************************************************************************************
+ * Name: stm32_select
+ *
+ * Description:
+ *   Select the LCD device
+ *
+ **************************************************************************************/
+
+static void stm32_select(FAR struct ssd1289_lcd_s *dev)
+{
+  /* Does not apply to this hardware */
+}
+
+/**************************************************************************************
+ * Name: stm32_deselect
+ *
+ * Description:
+ *   De-select the LCD device
+ *
+ **************************************************************************************/
+
+static void stm32_deselect(FAR struct ssd1289_lcd_s *dev)
+{
+  /* Does not apply to this hardware */
+}
+
+/**************************************************************************************
+ * Name: stm32_deselect
+ *
+ * Description:
+ *   Set the index register
+ *
+ **************************************************************************************/
+
+static void stm32_index(FAR struct ssd1289_lcd_s *dev, uint8_t index)
+{
+  putreg16((uint16_t)index, LCD_INDEX);
+}
+
+/**************************************************************************************
+ * Name: stm32_read
+ *
+ * Description:
+ *   Read LCD data (GRAM data or register contents)
+ *
+ **************************************************************************************/
+
+#ifndef CONFIG_SSD1289_WRONLY
+static uint16_t stm32_read(FAR struct ssd1289_lcd_s *dev)
+{
+  return getreg16(LCD_DATA);
+}
+#endif
+
+/**************************************************************************************
+ * Name: stm32_write
+ *
+ * Description:
+ *   Write LCD data (GRAM data or register contents)
+ *
+ **************************************************************************************/
+
+static void stm32_write(FAR struct ssd1289_lcd_s *dev, uint16_t data)
+{
+  putreg16((uint16_t)data, LCD_DATA);
+}
+
+/**************************************************************************************
+ * Name: stm32_write
+ *
+ * Description:
+ *   Write LCD data (GRAM data or register contents)
+ *
+ **************************************************************************************/
+
+static void stm32_backlight(FAR struct ssd1289_lcd_s *dev, int power)
+{
+#warning "Missing logic"
+}
+
+/************************************************************************************
+ * Name: stm32_selectlcd
+ *
+ * Description:
+ *   Initialize to the LCD
+ *
+ ************************************************************************************/
+
+void stm32_selectlcd(void)
+{
+  /* Configure GPIO pins */
+
+  stm32_extmemdata(LCD_NDATALINES);             /* Common data lines: D0-D15 */
+  stm32_extmemgpios(g_lcdconfig, NLCD_CONFIG);  /* LCD-specific control lines */
+
+  /* Enable AHB clocking to the FSMC */
+
+  stm32_enablefsmc();
+
+  /* Color LCD configuration (LCD configured as follow):
+   *
+   *   - Data/Address MUX  = Disable   "FSMC_BCR_MUXEN" just not enable it.
+   *   - Extended Mode     = Disable   "FSMC_BCR_EXTMOD"
+   *   - Memory Type       = SRAM      "FSMC_BCR_SRAM"
+   *   - Data Width        = 16bit     "FSMC_BCR_MWID16"
+   *   - Write Operation   = Enable    "FSMC_BCR_WREN"
+   *   - Asynchronous Wait = Disable
+   */
+
+  /* Bank1 NOR/SRAM control register configuration */
+
+  putreg32(FSMC_BCR_SRAM | FSMC_BCR_MWID16 | FSMC_BCR_WREN, STM32_FSMC_BCR1);
+
+  /* Bank1 NOR/SRAM timing register configuration */
+
+  putreg32(FSMC_BTR_ADDSET(5) | FSMC_BTR_ADDHLD(0) | FSMC_BTR_DATAST(9) | FSMC_BTR_BUSTRUN(0) |
+           FSMC_BTR_CLKDIV(0) | FSMC_BTR_DATLAT(0) | FSMC_BTR_ACCMODA, STM32_FSMC_BTR1);
+
+  putreg32(0xffffffff, STM32_FSMC_BWTR1);
+
+  /* Enable the bank by setting the MBKEN bit */
+
+  putreg32(FSMC_BCR_MBKEN | FSMC_BCR_SRAM | FSMC_BCR_MWID16 | FSMC_BCR_WREN, STM32_FSMC_BCR1);
+}
+
+/**************************************************************************************
+ * Public Functions
+ **************************************************************************************/
+
+/**************************************************************************************
+ * Name:  up_lcdinitialize
+ *
+ * Description:
+ *   Initialize the LCD video hardware.  The initial state of the LCD is fully
+ *   initialized, display memory cleared, and the LCD ready to use, but with the power
+ *   setting at 0 (full off).
+ *
+ **************************************************************************************/
+
+int up_lcdinitialize(void)
+{
+  /* Only initialize the driver once */
+
+  if (!g_ssd1289drvr)
+    {
+      lcdvdbg("Initializing\n");
+
+      /* Configure GPIO pins and configure the FSMC to support the LCD */
+
+      stm32_selectlcd();
+
+      /* Reset the LCD (active low) */
+
+      stm32_gpiowrite(GPIO_LCD_RESET, false);
+      up_mdelay(5);
+      stm32_gpiowrite(GPIO_LCD_RESET, true);
+
+      /* Configure and enable the LCD */
+
+      up_mdelay(50);
+      g_ssd1289drvr = ssd1289_lcdinitialize(&g_ssd1289);
+      if (!g_ssd1289drvr)
+        {
+          lcddbg("ERROR: ssd1289_lcdinitialize failed\n");
+          return -ENODEV;
+        }
+    }
+
+  /* Clear the display (setting it to the color 0=black) */
+
+#if 0 /* Already done in the driver */
+  ssd1289_clear(g_ssd1289drvr, 0);
+#endif
+
+  /* Turn the display off */
+
+  g_ssd1289drvr->setpower(g_ssd1289drvr, 0);
+  return OK;
+}
+
+/**************************************************************************************
+ * Name:  up_lcdgetdev
+ *
+ * Description:
+ *   Return a a reference to the LCD object for the specified LCD.  This allows support
+ *   for multiple LCD devices.
+ *
+ **************************************************************************************/
+
+FAR struct lcd_dev_s *up_lcdgetdev(int lcddev)
+{
+  DEBUGASSERT(lcddev == 0);
+  return g_ssd1289drvr;
+}
+
+/**************************************************************************************
+ * Name:  up_lcduninitialize
+ *
+ * Description:
+ *   Unitialize the LCD support
+ *
+ **************************************************************************************/
+
+void up_lcduninitialize(void)
+{
+  /* Turn the display off */
+
+  g_ssd1289drvr->setpower(g_ssd1289drvr, 0);
+}
+
+#endif /* CONFIG_LCD_SSD1289 */
+
+
diff --git a/nuttx/configs/px4fmu-v2/src/stm32_ug2864ambag01.c b/nuttx/configs/px4fmu-v2/src/stm32_ug2864ambag01.c
new file mode 100644
index 000000000..fdc6b88f3
--- /dev/null
+++ b/nuttx/configs/px4fmu-v2/src/stm32_ug2864ambag01.c
@@ -0,0 +1,160 @@
+/****************************************************************************
+ * config/stm32f4discovery/src/stm32_ug2864ambag01.c
+ *
+ *   Copyright (C) 2012 Gregory Nutt. All rights reserved.
+ *   Author: Gregory Nutt <gnutt@nuttx.org>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name NuttX nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ****************************************************************************/
+
+/****************************************************************************
+ * Included Files
+ ****************************************************************************/
+
+#include <nuttx/config.h>
+
+#include <debug.h>
+
+#include <nuttx/spi/spi.h>
+#include <nuttx/lcd/lcd.h>
+#include <nuttx/lcd/ug-2864ambag01.h>
+
+#include "stm32_gpio.h"
+#include "stm32f4discovery.h"
+
+#ifdef CONFIG_LCD_UG2864AMBAG01
+
+/****************************************************************************
+ * Pre-Processor Definitions
+ ****************************************************************************/
+/* Configuration ************************************************************/
+/* The pin configurations here require that SPI1 is selected */
+
+#ifndef CONFIG_STM32_SPI1
+#  error "The OLED driver requires CONFIG_STM32_SPI1 in the configuration"
+#endif
+
+#ifndef CONFIG_SPI_CMDDATA
+#  error "The OLED driver requires CONFIG_SPI_CMDDATA in the configuration"
+#endif
+
+/* Pin Configuration ********************************************************/
+/* UG-2864AMBAG01 OLED Display (SPI 4-wire):
+ *
+ * --------------------------+----------------------------------------------
+ * Connector CON10 J1:      | STM32F4Discovery
+ * --------------+-----------+----------------------------------------------
+ * CON10 J1:     | CON20 J2: | P1/P2:
+ * --------------+-----------+----------------------------------------------
+ * 1  3v3        | 3,4 3v3   | P2 3V
+ * 3  /RESET     | 8 /RESET  | P2 PB6 (Arbitrary selection)
+ * 5  /CS        | 7 /CS     | P2 PB7 (Arbitrary selection)(2)
+ * 7  A0         | 9 A0      | P2 PB8 (Arbitrary selection)(2)
+ * 9  LED+ (N/C) | -----     | -----
+ * 2  5V Vcc     | 1,2 Vcc   | P2 5V
+ * 4  DI         | 18 D1/SI  | P1 PA7 (GPIO_SPI1_MOSI == GPIO_SPI1_MOSI_1 (1))
+ * 6  SCLK       | 19 D0/SCL | P1 PA5 (GPIO_SPI1_SCK == GPIO_SPI1_SCK_1 (2))
+ * 8  LED- (N/C) | -----     | ------
+ * 10 GND        | 20 GND    | P2 GND
+ * --------------+-----------+----------------------------------------------
+ * (1) Required because of on-board MEMS
+ * (2) Note that the OLED CS and A0 are managed in the stm32_spi.c file.
+ * -------------------------------------------------------------------------
+ */
+
+/* Definitions in stm32f4discovery.h */
+
+/* Debug ********************************************************************/
+
+#ifdef CONFIG_DEBUG_LCD
+#  define lcddbg(format, ...)   dbg(format, ##__VA_ARGS__)
+#  define lcdvdbg(format, ...)  vdbg(format, ##__VA_ARGS__)
+#else
+#  define lcddbg(x...)
+#  define lcdvdbg(x...)
+#endif
+
+/****************************************************************************
+ * Public Functions
+ ****************************************************************************/
+
+/****************************************************************************
+ * Name: up_nxdrvinit
+ *
+ * Description:
+ *   Called by NX initialization logic to configure the OLED.
+ *
+ ****************************************************************************/
+
+FAR struct lcd_dev_s *up_nxdrvinit(unsigned int devno)
+{
+  FAR struct spi_dev_s *spi;
+  FAR struct lcd_dev_s *dev;
+
+  /* Configure the OLED GPIOs. This initial configuration is RESET low,
+   * putting the OLED into reset state.
+   */
+
+  (void)stm32_configgpio(GPIO_OLED_RESET);
+
+  /* Wait a bit then release the OLED from the reset state */
+
+  up_mdelay(20);
+  stm32_gpiowrite(GPIO_OLED_RESET, true);
+
+  /* Get the SPI1 port interface */
+
+  spi = up_spiinitialize(1);
+  if (!spi)
+    {
+      lcddbg("Failed to initialize SPI port 1\n");
+    }
+  else
+    {
+      /* Bind the SPI port to the OLED */
+
+      dev = ug2864ambag01_initialize(spi, devno);
+      if (!dev)
+        {
+          lcddbg("Failed to bind SPI port 1 to OLED %d: %d\n", devno);
+        }
+     else
+        {
+          lcdvdbg("Bound SPI port 1 to OLED %d\n", devno);
+
+          /* And turn the OLED on */
+
+          (void)dev->setpower(dev, CONFIG_LCD_MAXPOWER);
+          return dev;
+        }
+    }
+
+  return NULL;
+}
+#endif /* CONFIG_LCD_UG2864AMBAG01 */
diff --git a/nuttx/configs/px4fmu-v2/src/stm32_ug2864hsweg01.c b/nuttx/configs/px4fmu-v2/src/stm32_ug2864hsweg01.c
new file mode 100644
index 000000000..3366b093d
--- /dev/null
+++ b/nuttx/configs/px4fmu-v2/src/stm32_ug2864hsweg01.c
@@ -0,0 +1,160 @@
+/****************************************************************************
+ * config/stm32f4discovery/src/stm32_ug2864hsweg01.c
+ *
+ *   Copyright (C) 2012 Gregory Nutt. All rights reserved.
+ *   Author: Gregory Nutt <gnutt@nuttx.org>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name NuttX nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ****************************************************************************/
+
+/****************************************************************************
+ * Included Files
+ ****************************************************************************/
+
+#include <nuttx/config.h>
+
+#include <debug.h>
+
+#include <nuttx/spi/spi.h>
+#include <nuttx/lcd/lcd.h>
+#include <nuttx/lcd/ssd1306.h>
+
+#include "stm32_gpio.h"
+#include "stm32f4discovery.h"
+
+#ifdef CONFIG_LCD_UG2864HSWEG01
+
+/****************************************************************************
+ * Pre-Processor Definitions
+ ****************************************************************************/
+/* Configuration ************************************************************/
+/* The pin configurations here require that SPI1 is selected */
+
+#ifndef CONFIG_STM32_SPI1
+#  error "The OLED driver requires CONFIG_STM32_SPI1 in the configuration"
+#endif
+
+#ifndef CONFIG_SPI_CMDDATA
+#  error "The OLED driver requires CONFIG_SPI_CMDDATA in the configuration"
+#endif
+
+/* Pin Configuration ********************************************************/
+/* UG-2864HSWEG01 OLED Display (SPI 4-wire):
+ *
+ * --------------------------+----------------------------------------------
+ * Connector CON10 J1:      | STM32F4Discovery
+ * --------------+-----------+----------------------------------------------
+ * CON10 J1:     | CON20 J2: | P1/P2:
+ * --------------+-----------+----------------------------------------------
+ * 1  3v3        | 3,4 3v3   | P2 3V
+ * 3  /RESET     | 8 /RESET  | P2 PB6 (Arbitrary selection)
+ * 5  /CS        | 7 /CS     | P2 PB7 (Arbitrary selection)(2)
+ * 7  D/C        | 9 D/C     | P2 PB8 (Arbitrary selection)(2)
+ * 9  LED+ (N/C) | -----     | -----
+ * 2  5V Vcc     | 1,2 Vcc   | P2 5V
+ * 4  DI         | 18 D1/SI  | P1 PA7 (GPIO_SPI1_MOSI == GPIO_SPI1_MOSI_1 (1))
+ * 6  SCLK       | 19 D0/SCL | P1 PA5 (GPIO_SPI1_SCK == GPIO_SPI1_SCK_1 (2))
+ * 8  LED- (N/C) | -----     | ------
+ * 10 GND        | 20 GND    | P2 GND
+ * --------------+-----------+----------------------------------------------
+ * (1) Required because of on-board MEMS
+ * (2) Note that the OLED CS and D/C are managed in the stm32_spi.c file.
+ * -------------------------------------------------------------------------
+ */
+
+/* Definitions in stm32f4discovery.h */
+
+/* Debug ********************************************************************/
+
+#ifdef CONFIG_DEBUG_LCD
+#  define lcddbg(format, ...)   dbg(format, ##__VA_ARGS__)
+#  define lcdvdbg(format, ...)  vdbg(format, ##__VA_ARGS__)
+#else
+#  define lcddbg(x...)
+#  define lcdvdbg(x...)
+#endif
+
+/****************************************************************************
+ * Public Functions
+ ****************************************************************************/
+
+/****************************************************************************
+ * Name: up_nxdrvinit
+ *
+ * Description:
+ *   Called by NX initialization logic to configure the OLED.
+ *
+ ****************************************************************************/
+
+FAR struct lcd_dev_s *up_nxdrvinit(unsigned int devno)
+{
+  FAR struct spi_dev_s *spi;
+  FAR struct lcd_dev_s *dev;
+
+  /* Configure the OLED GPIOs. This initial configuration is RESET low,
+   * putting the OLED into reset state.
+   */
+
+  (void)stm32_configgpio(GPIO_OLED_RESET);
+
+  /* Wait a bit then release the OLED from the reset state */
+
+  up_mdelay(20);
+  stm32_gpiowrite(GPIO_OLED_RESET, true);
+
+  /* Get the SPI1 port interface */
+
+  spi = up_spiinitialize(1);
+  if (!spi)
+    {
+      lcddbg("Failed to initialize SPI port 1\n");
+    }
+  else
+    {
+      /* Bind the SPI port to the OLED */
+
+      dev = ssd1306_initialize(spi, devno);
+      if (!dev)
+        {
+          lcddbg("Failed to bind SPI port 1 to OLED %d: %d\n", devno);
+        }
+     else
+        {
+          lcdvdbg("Bound SPI port 1 to OLED %d\n", devno);
+
+          /* And turn the OLED on */
+
+          (void)dev->setpower(dev, CONFIG_LCD_MAXPOWER);
+          return dev;
+        }
+    }
+
+  return NULL;
+}
+#endif /* CONFIG_LCD_UG2864AMBAG01 */
diff --git a/nuttx/configs/px4fmu-v2/src/stm32_usb.c b/nuttx/configs/px4fmu-v2/src/stm32_usb.c
new file mode 100644
index 000000000..b1b24511c
--- /dev/null
+++ b/nuttx/configs/px4fmu-v2/src/stm32_usb.c
@@ -0,0 +1,311 @@
+/************************************************************************************
+ * configs/stm32f4discovery/src/stm32_usb.c
+ *
+ *   Copyright (C) 2012-2013 Gregory Nutt. All rights reserved.
+ *   Author: Gregory Nutt <gnutt@nuttx.org>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name NuttX nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ************************************************************************************/
+
+/************************************************************************************
+ * Included Files
+ ************************************************************************************/
+
+#include <nuttx/config.h>
+
+#include <sys/types.h>
+#include <stdint.h>
+#include <stdbool.h>
+#include <sched.h>
+#include <errno.h>
+#include <debug.h>
+
+#include <nuttx/usb/usbdev.h>
+#include <nuttx/usb/usbhost.h>
+#include <nuttx/usb/usbdev_trace.h>
+
+#include "up_arch.h"
+#include "stm32.h"
+#include "stm32_otgfs.h"
+#include "stm32f4discovery.h"
+
+#ifdef CONFIG_STM32_OTGFS
+
+/************************************************************************************
+ * Pre-processor Definitions
+ ************************************************************************************/
+
+#if defined(CONFIG_USBDEV) || defined(CONFIG_USBHOST)
+#  define HAVE_USB 1
+#else
+#  warning "CONFIG_STM32_OTGFS is enabled but neither CONFIG_USBDEV nor CONFIG_USBHOST"
+#  undef HAVE_USB
+#endif
+
+#ifndef CONFIG_USBHOST_DEFPRIO
+#  define CONFIG_USBHOST_DEFPRIO 50
+#endif
+
+#ifndef CONFIG_USBHOST_STACKSIZE
+#  define CONFIG_USBHOST_STACKSIZE 1024
+#endif
+
+/************************************************************************************
+ * Private Data
+ ************************************************************************************/
+
+#ifdef CONFIG_USBHOST
+static struct usbhost_connection_s *g_usbconn;
+#endif
+
+/************************************************************************************
+ * Private Functions
+ ************************************************************************************/
+
+/************************************************************************************
+ * Name: usbhost_waiter
+ *
+ * Description:
+ *   Wait for USB devices to be connected.
+ *
+ ************************************************************************************/
+
+#ifdef CONFIG_USBHOST
+static int usbhost_waiter(int argc, char *argv[])
+{
+  bool connected = false;
+  int ret;
+
+  uvdbg("Running\n");
+  for (;;)
+    {
+      /* Wait for the device to change state */
+
+      ret = CONN_WAIT(g_usbconn, &connected);
+      DEBUGASSERT(ret == OK);
+      UNUSED(ret);
+
+      connected = !connected;
+      uvdbg("%s\n", connected ? "connected" : "disconnected");
+
+      /* Did we just become connected? */
+
+      if (connected)
+        {
+          /* Yes.. enumerate the newly connected device */
+
+          (void)CONN_ENUMERATE(g_usbconn, 0);
+        }
+    }
+
+  /* Keep the compiler from complaining */
+
+  return 0;
+}
+#endif
+
+/************************************************************************************
+ * Public Functions
+ ************************************************************************************/
+
+/************************************************************************************
+ * Name: stm32_usbinitialize
+ *
+ * Description:
+ *   Called from stm32_usbinitialize very early in inialization to setup USB-related
+ *   GPIO pins for the STM32F4Discovery board.
+ *
+ ************************************************************************************/
+
+void stm32_usbinitialize(void)
+{
+  /* The OTG FS has an internal soft pull-up.  No GPIO configuration is required */
+
+  /* Configure the OTG FS VBUS sensing GPIO, Power On, and Overcurrent GPIOs */
+
+#ifdef CONFIG_STM32_OTGFS
+  stm32_configgpio(GPIO_OTGFS_VBUS);
+  stm32_configgpio(GPIO_OTGFS_PWRON);
+  stm32_configgpio(GPIO_OTGFS_OVER);
+#endif
+}
+
+/***********************************************************************************
+ * Name: stm32_usbhost_initialize
+ *
+ * Description:
+ *   Called at application startup time to initialize the USB host functionality.
+ *   This function will start a thread that will monitor for device
+ *   connection/disconnection events.
+ *
+ ***********************************************************************************/
+
+#ifdef CONFIG_USBHOST
+int stm32_usbhost_initialize(void)
+{
+  int pid;
+  int ret;
+
+  /* First, register all of the class drivers needed to support the drivers
+   * that we care about:
+   */
+
+  uvdbg("Register class drivers\n");
+
+#ifdef CONFIG_USBHOST_MSC
+  ret = usbhost_storageinit();
+  if (ret != OK)
+    {
+      udbg("Failed to register the mass storage class\n");
+    }
+#endif
+
+#ifdef CONFIG_USBHOST_HIDKBD
+  ret = usbhost_kbdinit();
+  if (ret != OK)
+    {
+      udbg("Failed to register the HID keyboard class\n");
+    }
+#endif
+
+#ifdef CONFIG_USBHOST_HIDMOUSE
+  ret = usbhost_mouse_init();
+  if (ret != OK)
+    {
+      udbg("Failed to register the HID mouse class\n");
+    }
+#endif
+
+  /* Then get an instance of the USB host interface */
+
+  uvdbg("Initialize USB host\n");
+  g_usbconn = stm32_otgfshost_initialize(0);
+  if (g_usbconn)
+    {
+      /* Start a thread to handle device connection. */
+
+      uvdbg("Start usbhost_waiter\n");
+
+      pid = task_create("usbhost", CONFIG_USBHOST_DEFPRIO,
+                        CONFIG_USBHOST_STACKSIZE,
+                        (main_t)usbhost_waiter, (FAR char * const *)NULL);
+      return pid < 0 ? -ENOEXEC : OK;
+    }
+
+  return -ENODEV;
+}
+#endif
+
+/***********************************************************************************
+ * Name: stm32_usbhost_vbusdrive
+ *
+ * Description:
+ *   Enable/disable driving of VBUS 5V output.  This function must be provided be
+ *   each platform that implements the STM32 OTG FS host interface
+ *
+ *   "On-chip 5 V VBUS generation is not supported. For this reason, a charge pump
+ *    or, if 5 V are available on the application board, a basic power switch, must
+ *    be added externally to drive the 5 V VBUS line. The external charge pump can
+ *    be driven by any GPIO output. When the application decides to power on VBUS
+ *    using the chosen GPIO, it must also set the port power bit in the host port
+ *    control and status register (PPWR bit in OTG_FS_HPRT).
+ *
+ *   "The application uses this field to control power to this port, and the core
+ *    clears this bit on an overcurrent condition."
+ *
+ * Input Parameters:
+ *   iface - For future growth to handle multiple USB host interface.  Should be zero.
+ *   enable - true: enable VBUS power; false: disable VBUS power
+ *
+ * Returned Value:
+ *   None
+ *
+ ***********************************************************************************/
+
+#ifdef CONFIG_USBHOST
+void stm32_usbhost_vbusdrive(int iface, bool enable)
+{
+  DEBUGASSERT(iface == 0);
+
+  if (enable)
+    {
+      /* Enable the Power Switch by driving the enable pin low */
+
+      stm32_gpiowrite(GPIO_OTGFS_PWRON, false);
+    }
+  else
+    {
+      /* Disable the Power Switch by driving the enable pin high */
+
+      stm32_gpiowrite(GPIO_OTGFS_PWRON, true);
+    }
+}
+#endif
+
+/************************************************************************************
+ * Name: stm32_setup_overcurrent
+ *
+ * Description:
+ *   Setup to receive an interrupt-level callback if an overcurrent condition is
+ *   detected.
+ *
+ * Input Parameter:
+ *   handler - New overcurrent interrupt handler
+ *
+ * Returned value:
+ *   Old overcurrent interrupt handler
+ *
+ ************************************************************************************/
+
+#ifdef CONFIG_USBHOST
+xcpt_t stm32_setup_overcurrent(xcpt_t handler)
+{
+  return stm32_gpiosetevent(GPIO_OTGFS_OVER, true, true, true, handler);
+}
+#endif
+
+/************************************************************************************
+ * Name:  stm32_usbsuspend
+ *
+ * Description:
+ *   Board logic must provide the stm32_usbsuspend logic if the USBDEV driver is
+ *   used.  This function is called whenever the USB enters or leaves suspend mode.
+ *   This is an opportunity for the board logic to shutdown clocks, power, etc.
+ *   while the USB is suspended.
+ *
+ ************************************************************************************/
+
+#ifdef CONFIG_USBDEV
+void stm32_usbsuspend(FAR struct usbdev_s *dev, bool resume)
+{
+  ulldbg("resume: %d\n", resume);
+}
+#endif
+
+#endif /* CONFIG_STM32_OTGFS */
diff --git a/nuttx/configs/px4fmu-v2/src/stm32_userleds.c b/nuttx/configs/px4fmu-v2/src/stm32_userleds.c
new file mode 100644
index 000000000..b5c2e9c27
--- /dev/null
+++ b/nuttx/configs/px4fmu-v2/src/stm32_userleds.c
@@ -0,0 +1,245 @@
+/****************************************************************************
+ * configs/stm32f4discovery/src/stm32_userleds.c
+ *
+ *   Copyright (C) 2011 Gregory Nutt. All rights reserved.
+ *   Author: Gregory Nutt <gnutt@nuttx.org>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name NuttX nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ****************************************************************************/
+
+/****************************************************************************
+ * Included Files
+ ****************************************************************************/
+
+#include <nuttx/config.h>
+
+#include <stdint.h>
+#include <stdbool.h>
+#include <debug.h>
+
+#include <arch/board/board.h>
+#include <nuttx/power/pm.h>
+
+#include "chip.h"
+#include "up_arch.h"
+#include "up_internal.h"
+#include "stm32.h"
+#include "stm32f4discovery.h"
+
+#ifndef CONFIG_ARCH_LEDS
+
+/****************************************************************************
+ * Definitions
+ ****************************************************************************/
+
+/* CONFIG_DEBUG_LEDS enables debug output from this file (needs CONFIG_DEBUG
+ * with CONFIG_DEBUG_VERBOSE too)
+ */
+
+#ifdef CONFIG_DEBUG_LEDS
+#  define leddbg  lldbg
+#  define ledvdbg llvdbg
+#else
+#  define leddbg(x...)
+#  define ledvdbg(x...)
+#endif
+
+/****************************************************************************
+ * Private Data
+ ****************************************************************************/
+/* This array maps an LED number to GPIO pin configuration */
+
+static uint32_t g_ledcfg[BOARD_NLEDS] =
+{
+  GPIO_LED1, GPIO_LED2, GPIO_LED3, GPIO_LED4
+};
+
+/****************************************************************************
+ * Private Function Protototypes
+ ****************************************************************************/
+
+/* LED Power Management */
+
+#ifdef CONFIG_PM
+static void led_pm_notify(struct pm_callback_s *cb, enum pm_state_e pmstate);
+static int led_pm_prepare(struct pm_callback_s *cb, enum pm_state_e pmstate);
+#endif
+
+
+/****************************************************************************
+ * Private Data
+ ****************************************************************************/
+
+#ifdef CONFIG_PM
+static struct pm_callback_s g_ledscb =
+{
+  .notify  = led_pm_notify,
+  .prepare = led_pm_prepare,
+};
+#endif
+
+/****************************************************************************
+ * Private Functions
+ ****************************************************************************/
+
+/****************************************************************************
+ * Name: led_pm_notify
+ *
+ * Description:
+ *   Notify the driver of new power state. This callback is called after
+ *   all drivers have had the opportunity to prepare for the new power state.
+ *
+ ****************************************************************************/
+
+#ifdef CONFIG_PM
+static void led_pm_notify(struct pm_callback_s *cb , enum pm_state_e pmstate)
+{
+  switch (pmstate)
+    {
+      case(PM_NORMAL):
+        {
+          /* Restore normal LEDs operation */
+
+        }
+        break;
+
+      case(PM_IDLE):
+        {
+          /* Entering IDLE mode - Turn leds off */
+
+        }
+        break;
+
+      case(PM_STANDBY):
+        {
+          /* Entering STANDBY mode - Logic for PM_STANDBY goes here */
+
+        }
+        break;
+
+      case(PM_SLEEP):
+        {
+          /* Entering SLEEP mode - Logic for PM_SLEEP goes here */
+
+        }
+        break;
+
+      default:
+        {
+          /* Should not get here */
+
+        }
+        break;
+    }
+}
+#endif
+
+/****************************************************************************
+ * Name: led_pm_prepare
+ *
+ * Description:
+ *   Request the driver to prepare for a new power state. This is a warning
+ *   that the system is about to enter into a new power state. The driver
+ *   should begin whatever operations that may be required to enter power
+ *   state. The driver may abort the state change mode by returning a
+ *   non-zero value from the callback function.
+ *
+ ****************************************************************************/
+
+#ifdef CONFIG_PM
+static int led_pm_prepare(struct pm_callback_s *cb , enum pm_state_e pmstate)
+{
+  /* No preparation to change power modes is required by the LEDs driver.
+   * We always accept the state change by returning OK.
+   */
+
+  return OK;
+}
+#endif
+
+/****************************************************************************
+ * Public Functions
+ ****************************************************************************/
+
+/****************************************************************************
+ * Name: stm32_ledinit
+ ****************************************************************************/
+
+void stm32_ledinit(void)
+{
+   /* Configure LED1-4 GPIOs for output */
+
+   stm32_configgpio(GPIO_LED1);
+   stm32_configgpio(GPIO_LED2);
+   stm32_configgpio(GPIO_LED3);
+   stm32_configgpio(GPIO_LED4);
+}
+
+/****************************************************************************
+ * Name: stm32_setled
+ ****************************************************************************/
+
+void stm32_setled(int led, bool ledon)
+{
+  if ((unsigned)led < BOARD_NLEDS)
+    {
+      stm32_gpiowrite(g_ledcfg[led], ledon);
+    }
+}
+
+/****************************************************************************
+ * Name: stm32_setleds
+ ****************************************************************************/
+
+void stm32_setleds(uint8_t ledset)
+{
+  stm32_gpiowrite(GPIO_LED1, (ledset & BOARD_LED1_BIT) == 0);
+  stm32_gpiowrite(GPIO_LED2, (ledset & BOARD_LED2_BIT) == 0);
+  stm32_gpiowrite(GPIO_LED3, (ledset & BOARD_LED3_BIT) == 0);
+  stm32_gpiowrite(GPIO_LED4, (ledset & BOARD_LED4_BIT) == 0);
+}
+
+/****************************************************************************
+ * Name: stm32_led_pminitialize
+ ****************************************************************************/
+
+#ifdef CONFIG_PM
+void stm32_led_pminitialize(void)
+{
+  /* Register to receive power management callbacks */
+
+  int ret = pm_register(&g_ledscb);
+  if (ret != OK)
+  {
+      board_led_on(LED_ASSERTION);
+    }
+}
+#endif /* CONFIG_PM */
+
+#endif /* !CONFIG_ARCH_LEDS */
diff --git a/nuttx/configs/px4fmu-v2/src/stm32_watchdog.c b/nuttx/configs/px4fmu-v2/src/stm32_watchdog.c
new file mode 100644
index 000000000..c1a659d0e
--- /dev/null
+++ b/nuttx/configs/px4fmu-v2/src/stm32_watchdog.c
@@ -0,0 +1,135 @@
+/************************************************************************************
+ * configs/stm32f4discovery/src/stm32_watchdog.c
+ *
+ *   Copyright (C) 2012 Gregory Nutt. All rights reserved.
+ *   Author: Gregory Nutt <gnutt@nuttx.org>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name NuttX nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ************************************************************************************/
+
+/************************************************************************************
+ * Included Files
+ ************************************************************************************/
+
+#include <nuttx/config.h>
+
+#include <errno.h>
+#include <debug.h>
+
+#include <nuttx/watchdog.h>
+#include <arch/board/board.h>
+
+#include "stm32_wdg.h"
+
+#ifdef CONFIG_WATCHDOG
+
+/************************************************************************************
+ * Definitions
+ ************************************************************************************/
+/* Configuration *******************************************************************/
+/* Wathdog hardware should be enabled */
+
+#if !defined(CONFIG_STM32_WWDG) && !defined(CONFIG_STM32_IWDG)
+#  warning "One of CONFIG_STM32_WWDG or CONFIG_STM32_IWDG must be defined"
+#endif
+
+/* Select the path to the registered watchdog timer device */
+
+#ifndef CONFIG_STM32_WDG_DEVPATH
+#  ifdef CONFIG_EXAMPLES_WATCHDOG_DEVPATH
+#    define CONFIG_STM32_WDG_DEVPATH CONFIG_EXAMPLES_WATCHDOG_DEVPATH
+#  else
+#    define CONFIG_STM32_WDG_DEVPATH "/dev/watchdog0"
+#  endif
+#endif
+
+/* Use the un-calibrated LSI frequency if we have nothing better */
+
+#if defined(CONFIG_STM32_IWDG) && !defined(CONFIG_STM32_LSIFREQ)
+#  define CONFIG_STM32_LSIFREQ STM32_LSI_FREQUENCY
+#endif
+
+/* Debug ***************************************************************************/
+/* Non-standard debug that may be enabled just for testing the watchdog timer */
+
+#ifndef CONFIG_DEBUG
+#  undef CONFIG_DEBUG_WATCHDOG
+#endif
+
+#ifdef CONFIG_DEBUG_WATCHDOG
+#  define wdgdbg                 dbg
+#  define wdglldbg               lldbg
+#  ifdef CONFIG_DEBUG_VERBOSE
+#    define wdgvdbg              vdbg
+#    define wdgllvdbg            llvdbg
+#  else
+#    define wdgvdbg(x...)
+#    define wdgllvdbg(x...)
+#  endif
+#else
+#  define wdgdbg(x...)
+#  define wdglldbg(x...)
+#  define wdgvdbg(x...)
+#  define wdgllvdbg(x...)
+#endif
+
+/************************************************************************************
+ * Private Functions
+ ************************************************************************************/
+
+/************************************************************************************
+ * Public Functions
+ ************************************************************************************/
+
+/****************************************************************************
+ * Name: up_wdginitialize()
+ *
+ * Description:
+ *   Perform architecuture-specific initialization of the Watchdog hardware.
+ *   This interface must be provided by all configurations using
+ *   apps/examples/watchdog
+ *
+ ****************************************************************************/
+
+int up_wdginitialize(void)
+{
+  /* Initialize tha register the watchdog timer device */
+
+#if defined(CONFIG_STM32_WWDG)
+  stm32_wwdginitialize(CONFIG_STM32_WDG_DEVPATH);
+  return OK;
+#elif defined(CONFIG_STM32_IWDG)
+  stm32_iwdginitialize(CONFIG_STM32_WDG_DEVPATH, CONFIG_STM32_LSIFREQ);
+  return OK;
+#else
+  return -ENODEV;
+#endif
+}
+
+#endif /* CONFIG_WATCHDOG */
diff --git a/nuttx/configs/px4fmu-v2/src/stm32f4discovery.h b/nuttx/configs/px4fmu-v2/src/stm32f4discovery.h
new file mode 100644
index 000000000..0992f1f4d
--- /dev/null
+++ b/nuttx/configs/px4fmu-v2/src/stm32f4discovery.h
@@ -0,0 +1,427 @@
+/****************************************************************************
+ * configs/stm32f4discovery/src/stm32f4discovery.h
+ *
+ *   Copyright (C) 2011-2012 Gregory Nutt. All rights reserved.
+ *   Author: Gregory Nutt <gnutt@nuttx.org>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name NuttX nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ****************************************************************************/
+
+#ifndef __CONFIGS_STM32F4DISCOVERY_SRC_STM32F4DISCOVERY_H
+#define __CONFIGS_STM32F4DISCOVERY_SRC_STM32F4DISCOVERY_H
+
+/****************************************************************************
+ * Included Files
+ ****************************************************************************/
+
+#include <nuttx/config.h>
+#include <nuttx/compiler.h>
+#include <stdint.h>
+
+/****************************************************************************
+ * Pre-processor Definitions
+ ****************************************************************************/
+/* Configuration *************************************************************/
+/* How many SPI modules does this chip support? */
+
+#if STM32_NSPI < 1
+#  undef CONFIG_STM32_SPI1
+#  undef CONFIG_STM32_SPI2
+#  undef CONFIG_STM32_SPI3
+#elif STM32_NSPI < 2
+#  undef CONFIG_STM32_SPI2
+#  undef CONFIG_STM32_SPI3
+#elif STM32_NSPI < 3
+#  undef CONFIG_STM32_SPI3
+#endif
+
+/* Assume that we have everything */
+
+#define HAVE_USBDEV     1
+#define HAVE_USBHOST    1
+#define HAVE_USBMONITOR 1
+#define HAVE_SDIO       1
+
+/* Can't support USB host or device features if USB OTG FS is not enabled */
+
+#ifndef CONFIG_STM32_OTGFS
+#  undef HAVE_USBDEV
+#  undef HAVE_USBHOST
+#  undef HAVE_USBMONITOR
+#endif
+
+/* Can't support USB device monitor if USB device is not enabled */
+
+#ifndef CONFIG_USBDEV
+#  undef HAVE_USBDEV
+#  undef HAVE_USBMONITOR
+#endif
+
+/* Can't support USB host is USB host is not enabled */
+
+#ifndef CONFIG_USBHOST
+#  undef HAVE_USBHOST
+#endif
+
+/* Check if we should enable the USB monitor before starting NSH */
+
+#if !defined(CONFIG_USBDEV_TRACE) || !defined(CONFIG_SYSTEM_USBMONITOR)
+#  undef HAVE_USBMONITOR
+#endif
+
+/* Can't support MMC/SD features if mountpoints are disabled or if SDIO support
+ * is not enabled.
+ */
+
+#if defined(CONFIG_DISABLE_MOUNTPOINT) || !defined(CONFIG_STM32_SDIO)
+#  undef HAVE_SDIO
+#endif
+
+#undef SDIO_MINOR      /* Any minor number, default 0 */
+#define SDIO_SLOTNO 0  /* Only one slot */
+
+#ifdef HAVE_SDIO
+
+#  if defined(CONFIG_NSH_MMCSDSLOTNO) && CONFIG_NSH_MMCSDSLOTNO != 0
+#    warning "Only one MMC/SD slot, slot 0"
+#    undef CONFIG_NSH_MMCSDSLOTNO
+#    define CONFIG_NSH_MMCSDSLOTNO SDIO_SLOTNO
+#  endif
+
+#  if defined(CONFIG_NSH_MMCSDMINOR)
+#    define SDIO_MINOR CONFIG_NSH_MMCSDMINOR
+#  else
+#    define SDIO_MINOR 0
+#  endif
+
+  /* SD card bringup does not work if performed on the IDLE thread because it
+   * will cause waiting.  Use either:
+   *
+   *  CONFIG_NSH_ARCHINIT=y, OR
+   *  CONFIG_BOARD_INITIALIZE=y && CONFIG_BOARD_INITTHREAD=y
+   */
+
+#  if defined(CONFIG_BOARD_INITIALIZE) && !defined(CONFIG_BOARD_INITTHREAD)
+#    warning "SDIO initialization cannot be perfomed on the IDLE thread"
+#    undef HAVE_SDIO
+#  endif
+#endif
+
+/* STM32F4 Discovery GPIOs **************************************************/
+/* LEDs */
+
+#define GPIO_LED1       (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_50MHz|\
+                         GPIO_OUTPUT_CLEAR|GPIO_PORTD|GPIO_PIN12)
+#define GPIO_LED2       (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_50MHz|\
+                         GPIO_OUTPUT_CLEAR|GPIO_PORTD|GPIO_PIN13)
+#define GPIO_LED3       (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_50MHz|\
+                         GPIO_OUTPUT_CLEAR|GPIO_PORTD|GPIO_PIN14)
+#define GPIO_LED4       (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_50MHz|\
+                         GPIO_OUTPUT_CLEAR|GPIO_PORTD|GPIO_PIN15)
+
+/* BUTTONS -- NOTE that all have EXTI interrupts configured */
+
+#define MIN_IRQBUTTON   BUTTON_USER
+#define MAX_IRQBUTTON   BUTTON_USER
+#define NUM_IRQBUTTONS  1
+
+#define GPIO_BTN_USER   (GPIO_INPUT|GPIO_FLOAT|GPIO_EXTI|GPIO_PORTA|GPIO_PIN0)
+
+/* PWM
+ *
+ * The STM32F4 Discovery has no real on-board PWM devices, but the board can be
+ * configured to output a pulse train using TIM4 CH2 on PD13.
+ */
+
+#define STM32F4DISCOVERY_PWMTIMER   4
+#define STM32F4DISCOVERY_PWMCHANNEL 2
+
+/* SPI chip selects */
+
+#define GPIO_CS_MEMS      (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_50MHz|\
+                           GPIO_OUTPUT_SET|GPIO_PORTE|GPIO_PIN3)
+
+/* USB OTG FS
+ *
+ * PA9  OTG_FS_VBUS VBUS sensing (also connected to the green LED)
+ * PC0  OTG_FS_PowerSwitchOn
+ * PD5  OTG_FS_Overcurrent
+ */
+
+#define GPIO_OTGFS_VBUS   (GPIO_INPUT|GPIO_FLOAT|GPIO_SPEED_100MHz|\
+                           GPIO_OPENDRAIN|GPIO_PORTA|GPIO_PIN9)
+#define GPIO_OTGFS_PWRON  (GPIO_OUTPUT|GPIO_FLOAT|GPIO_SPEED_100MHz|\
+                           GPIO_PUSHPULL|GPIO_PORTC|GPIO_PIN0)
+
+#ifdef CONFIG_USBHOST
+#  define GPIO_OTGFS_OVER (GPIO_INPUT|GPIO_EXTI|GPIO_FLOAT|\
+                           GPIO_SPEED_100MHz|GPIO_PUSHPULL|\
+                           GPIO_PORTD|GPIO_PIN5)
+
+#else
+#  define GPIO_OTGFS_OVER (GPIO_INPUT|GPIO_FLOAT|GPIO_SPEED_100MHz|\
+                           GPIO_PUSHPULL|GPIO_PORTD|GPIO_PIN5)
+#endif
+
+/* UG-2864AMBAG01 or UG-2864HSWEG01 OLED Display (SPI 4-wire):
+ *
+ * --------------------------+----------------------------------------------
+ * Connector CON10 J1:      | STM32F4Discovery
+ * --------------+-----------+----------------------------------------------
+ * CON10 J1:     | CON20 J2: | P1/P2:
+ * --------------+-----------+----------------------------------------------
+ * 1  3v3        | 3,4 3v3   | P2 3V
+ * 3  /RESET     | 8 /RESET  | P2 PB6 (Arbitrary selection)
+ * 5  /CS        | 7 /CS     | P2 PB7 (Arbitrary selection)
+ * 7  A0|D/C     | 9 A0|D/C  | P2 PB8 (Arbitrary selection)
+ * 9  LED+ (N/C) | -----     | -----
+ * 2  5V Vcc     | 1,2 Vcc   | P2 5V
+ * 4  DI         | 18 D1/SI  | P1 PA7 (GPIO_SPI1_MOSI == GPIO_SPI1_MOSI_1 (1))
+ * 6  SCLK       | 19 D0/SCL | P1 PA5 (GPIO_SPI1_SCK == GPIO_SPI1_SCK_1 (1))
+ * 8  LED- (N/C) | -----     | ------
+ * 10 GND        | 20 GND    | P2 GND
+ * --------------+-----------+----------------------------------------------
+ * (1) Required because of on-board MEMS
+ * -------------------------------------------------------------------------
+ */
+
+#if defined(CONFIG_LCD_UG2864AMBAG01) || defined(CONFIG_LCD_UG2864HSWEG01)
+#  define GPIO_OLED_RESET (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_50MHz|\
+                           GPIO_OUTPUT_CLEAR|GPIO_PORTB|GPIO_PIN6)
+#  define GPIO_OLED_CS    (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_50MHz|\
+                           GPIO_OUTPUT_SET|GPIO_PORTB|GPIO_PIN7)
+#  define GPIO_OLED_A0    (GPIO_OUTPUT|GPIO_PUSHPULL|GPIO_SPEED_50MHz|\
+                           GPIO_OUTPUT_CLEAR|GPIO_PORTB|GPIO_PIN8)
+#  define GPIO_OLED_DC    GPIO_OLED_A0
+#endif
+
+/* STM32F4DIS-BB MicroSD
+ *
+ * ---------- ------------- ------------------------------
+ * PIO        SIGNAL        Comments
+ * ---------- ------------- ------------------------------
+ * PB15       NCD           Pulled up externally
+ * PC9        DAT1          Configured by driver
+ * PC8        DAT0          "        " "" "    "
+ * PC12       CLK           "        " "" "    "
+ * PD2        CMD           "        " "" "    "
+ * PC11       CD/DAT3       "        " "" "    "
+ * PC10       DAT2          "        " "" "    "
+ * ---------- ------------- ------------------------------
+ */
+
+#if defined(CONFIG_STM32F4DISBB) && defined(CONFIG_STM32_SDIO)
+#  define GPIO_SDIO_NCD   (GPIO_INPUT|GPIO_FLOAT|GPIO_EXTI|\
+                           GPIO_PORTB|GPIO_PIN15)
+#endif
+
+/****************************************************************************
+ * Public Types
+ ****************************************************************************/
+
+/****************************************************************************
+ * Public data
+ ****************************************************************************/
+
+#ifndef __ASSEMBLY__
+
+/****************************************************************************
+ * Public Functions
+ ****************************************************************************/
+
+/****************************************************************************
+ * Name: stm32_spiinitialize
+ *
+ * Description:
+ *   Called to configure SPI chip select GPIO pins for the stm32f4discovery
+ *   board.
+ *
+ ****************************************************************************/
+
+void weak_function stm32_spiinitialize(void);
+
+/****************************************************************************
+ * Name: stm32_bringup
+ *
+ * Description:
+ *   Perform architecture-specific initialization
+ *
+ *   CONFIG_BOARD_INITIALIZE=y :
+ *     Called from board_initialize().
+ *
+ *   CONFIG_BOARD_INITIALIZE=y && CONFIG_NSH_ARCHINIT=y :
+ *     Called from the NSH library
+ *
+ ****************************************************************************/
+
+int stm32_bringup(void);
+
+/****************************************************************************
+ * Name: stm32_usbinitialize
+ *
+ * Description:
+ *   Called from stm32_usbinitialize very early in initialization to setup
+ *   USB-related GPIO pins for the STM32F4Discovery board.
+ *
+ ****************************************************************************/
+
+#ifdef CONFIG_STM32_OTGFS
+void weak_function stm32_usbinitialize(void);
+#endif
+
+/****************************************************************************
+ * Name: stm32_usbhost_initialize
+ *
+ * Description:
+ *   Called at application startup time to initialize the USB host
+ *   functionality. This function will start a thread that will monitor for
+ *   device connection/disconnection events.
+ *
+ ****************************************************************************/
+
+#if defined(CONFIG_STM32_OTGFS) && defined(CONFIG_USBHOST)
+int stm32_usbhost_initialize(void);
+#endif
+
+/****************************************************************************
+ * Name: stm32_extmemgpios
+ *
+ * Description:
+ *   Initialize GPIOs for external memory usage
+ *
+ ****************************************************************************/
+
+#ifdef CONFIG_STM32_FSMC
+void stm32_extmemgpios(const uint32_t *gpios, int ngpios);
+#endif
+
+/****************************************************************************
+ * Name: stm32_extmemaddr
+ *
+ * Description:
+ *   Initialize adress line GPIOs for external memory access
+ *
+ ****************************************************************************/
+
+#ifdef CONFIG_STM32_FSMC
+void stm32_extmemaddr(int naddrs);
+#endif
+
+/****************************************************************************
+ * Name: stm32_extmemdata
+ *
+ * Description:
+ *   Initialize data line GPIOs for external memory access
+ *
+ ****************************************************************************/
+
+#ifdef CONFIG_STM32_FSMC
+void stm32_extmemdata(int ndata);
+#endif
+
+/****************************************************************************
+ * Name: stm32_enablefsmc
+ *
+ * Description:
+ *  enable clocking to the FSMC module
+ *
+ ****************************************************************************/
+
+#ifdef CONFIG_STM32_FSMC
+void stm32_enablefsmc(void);
+#endif
+
+/****************************************************************************
+ * Name: stm32_disablefsmc
+ *
+ * Description:
+ *  enable clocking to the FSMC module
+ *
+ ****************************************************************************/
+
+#ifdef CONFIG_STM32_FSMC
+void stm32_disablefsmc(void);
+#endif
+
+/****************************************************************************
+ * Name: stm32_led_pminitialize
+ *
+ * Description:
+ *   Enable logic to use the LEDs on the STM32F4Discovery to support power
+ *   management testing
+ *
+ ****************************************************************************/
+
+#ifdef CONFIG_PM
+void stm32_led_pminitialize(void);
+#endif
+
+/****************************************************************************
+ * Name: stm32_pm_buttons
+ *
+ * Description:
+ *   Configure the user button of the STM32f4discovery board as EXTI,
+ *   so it is able to wakeup the MCU from the PM_STANDBY mode
+ *
+ ****************************************************************************/
+
+#if defined(CONFIG_PM) && defined(CONFIG_ARCH_IDLE_CUSTOM) && defined(CONFIG_PM_BUTTONS)
+void stm32_pm_buttons(void);
+#endif
+
+/****************************************************************************
+ * Name: stm32_bringup
+ *
+ * Description:
+ *   Perform architecture-specific initialization
+ *
+ *   CONFIG_BOARD_INITIALIZE=y :
+ *     Called from board_initialize().
+ *
+ *   CONFIG_BOARD_INITIALIZE=n && CONFIG_NSH_ARCHINIT=y :
+ *     Called from the NSH library
+ *
+ ****************************************************************************/
+
+int stm32_bringup(void);
+
+/****************************************************************************
+ * Name: stm32_sdio_initialize
+ *
+ * Description:
+ *   Initialize SDIO-based MMC/SD card support
+ *
+ ****************************************************************************/
+
+#if !defined(CONFIG_DISABLE_MOUNTPOINT) && defined(CONFIG_STM32_SDIO)
+int stm32_sdio_initialize(void);
+#endif
+
+#endif /* __ASSEMBLY__ */
+#endif /* __CONFIGS_STM32F4DISCOVERY_SRC_STM32F4DISCOVERY_H */
diff --git a/nuttx/configs/px4fmu-v2/usbnsh/Make.defs b/nuttx/configs/px4fmu-v2/usbnsh/Make.defs
new file mode 100644
index 000000000..f59f4c24f
--- /dev/null
+++ b/nuttx/configs/px4fmu-v2/usbnsh/Make.defs
@@ -0,0 +1,112 @@
+############################################################################
+# configs/stm32f4discovery/usbnsh/Make.defs
+#
+#   Copyright (C) 2013 Gregory Nutt. All rights reserved.
+#   Author: Gregory Nutt <gnutt@nuttx.org>
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions
+# are met:
+#
+# 1. Redistributions of source code must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+# 2. Redistributions in binary form must reproduce the above copyright
+#    notice, this list of conditions and the following disclaimer in
+#    the documentation and/or other materials provided with the
+#    distribution.
+# 3. Neither the name NuttX nor the names of its contributors may be
+#    used to endorse or promote products derived from this software
+#    without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+#
+############################################################################
+
+include ${TOPDIR}/.config
+include ${TOPDIR}/tools/Config.mk
+include ${TOPDIR}/arch/arm/src/armv7-m/Toolchain.defs
+
+LDSCRIPT = ld.script
+
+ifeq ($(WINTOOL),y)
+  # Windows-native toolchains
+  DIRLINK = $(TOPDIR)/tools/copydir.sh
+  DIRUNLINK = $(TOPDIR)/tools/unlink.sh
+  MKDEP = $(TOPDIR)/tools/mknulldeps.sh
+  ARCHINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}"
+  ARCHXXINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}" -isystem "${shell cygpath -w $(TOPDIR)/include/cxx}"
+  ARCHSCRIPT = -T "${shell cygpath -w $(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/scripts/$(LDSCRIPT)}"
+else
+  # Linux/Cygwin-native toolchain
+  MKDEP = $(TOPDIR)/tools/mkdeps.sh
+  ARCHINCLUDES = -I. -isystem $(TOPDIR)/include
+  ARCHXXINCLUDES = -I. -isystem $(TOPDIR)/include -isystem $(TOPDIR)/include/cxx
+  ARCHSCRIPT = -T$(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/scripts/$(LDSCRIPT)
+endif
+
+CC = $(CROSSDEV)gcc
+CXX = $(CROSSDEV)g++
+CPP = $(CROSSDEV)gcc -E
+LD = $(CROSSDEV)ld
+AR = $(ARCROSSDEV)ar rcs
+NM = $(ARCROSSDEV)nm
+OBJCOPY = $(CROSSDEV)objcopy
+OBJDUMP = $(CROSSDEV)objdump
+
+ARCHCCVERSION = ${shell $(CC) -v 2>&1 | sed -n '/^gcc version/p' | sed -e 's/^gcc version \([0-9\.]\)/\1/g' -e 's/[-\ ].*//g' -e '1q'}
+ARCHCCMAJOR = ${shell echo $(ARCHCCVERSION) | cut -d'.' -f1}
+
+ifeq ($(CONFIG_DEBUG_SYMBOLS),y)
+  ARCHOPTIMIZATION = -g
+endif
+
+ifneq ($(CONFIG_DEBUG_NOOPT),y)
+  ARCHOPTIMIZATION += $(MAXOPTIMIZATION) -fno-strict-aliasing -fno-strength-reduce -fomit-frame-pointer
+endif
+
+ARCHCFLAGS = -fno-builtin
+ARCHCXXFLAGS = -fno-builtin -fno-exceptions -fno-rtti
+ARCHWARNINGS = -Wall -Wstrict-prototypes -Wshadow
+ARCHWARNINGSXX = -Wall -Wshadow
+ARCHDEFINES =
+ARCHPICFLAGS = -fpic -msingle-pic-base -mpic-register=r10
+
+CFLAGS = $(ARCHCFLAGS) $(ARCHWARNINGS) $(ARCHOPTIMIZATION) $(ARCHCPUFLAGS) $(ARCHINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES) -pipe
+CPICFLAGS = $(ARCHPICFLAGS) $(CFLAGS)
+CXXFLAGS = $(ARCHCXXFLAGS) $(ARCHWARNINGSXX) $(ARCHOPTIMIZATION) $(ARCHCPUFLAGS) $(ARCHXXINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES) -pipe
+CXXPICFLAGS = $(ARCHPICFLAGS) $(CXXFLAGS)
+CPPFLAGS = $(ARCHINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES)
+AFLAGS = $(CFLAGS) -D__ASSEMBLY__
+
+NXFLATLDFLAGS1 = -r -d -warn-common
+NXFLATLDFLAGS2 = $(NXFLATLDFLAGS1) -T$(TOPDIR)/binfmt/libnxflat/gnu-nxflat-pcrel.ld -no-check-sections
+LDNXFLATFLAGS = -e main -s 2048
+
+OBJEXT = .o
+LIBEXT = .a
+EXEEXT =
+
+ifneq ($(CROSSDEV),arm-nuttx-elf-)
+  LDFLAGS += -nostartfiles -nodefaultlibs
+endif
+ifeq ($(CONFIG_DEBUG_SYMBOLS),y)
+  LDFLAGS += -g
+endif
+
+
+HOSTCC = gcc
+HOSTINCLUDES = -I.
+HOSTCFLAGS = -Wall -Wstrict-prototypes -Wshadow -g -pipe
+HOSTLDFLAGS =
+
diff --git a/nuttx/configs/px4fmu-v2/usbnsh/defconfig b/nuttx/configs/px4fmu-v2/usbnsh/defconfig
new file mode 100644
index 000000000..58b517098
--- /dev/null
+++ b/nuttx/configs/px4fmu-v2/usbnsh/defconfig
@@ -0,0 +1,976 @@
+#
+# Automatically generated file; DO NOT EDIT.
+# Nuttx/ Configuration
+#
+
+#
+# Build Setup
+#
+# CONFIG_EXPERIMENTAL is not set
+# CONFIG_DEFAULT_SMALL is not set
+# CONFIG_HOST_LINUX is not set
+# CONFIG_HOST_OSX is not set
+CONFIG_HOST_WINDOWS=y
+# CONFIG_HOST_OTHER is not set
+# CONFIG_WINDOWS_NATIVE is not set
+CONFIG_WINDOWS_CYGWIN=y
+# CONFIG_WINDOWS_MSYS is not set
+# CONFIG_WINDOWS_OTHER is not set
+
+#
+# Build Configuration
+#
+# CONFIG_APPS_DIR="../apps"
+# CONFIG_BUILD_2PASS is not set
+
+#
+# Binary Output Formats
+#
+# CONFIG_RRLOAD_BINARY is not set
+CONFIG_INTELHEX_BINARY=y
+# CONFIG_MOTOROLA_SREC is not set
+CONFIG_RAW_BINARY=y
+
+#
+# Customize Header Files
+#
+# CONFIG_ARCH_STDINT_H is not set
+# CONFIG_ARCH_STDBOOL_H is not set
+# CONFIG_ARCH_MATH_H is not set
+# CONFIG_ARCH_FLOAT_H is not set
+# CONFIG_ARCH_STDARG_H is not set
+
+#
+# Debug Options
+#
+# CONFIG_DEBUG is not set
+CONFIG_ARCH_HAVE_STACKCHECK=y
+CONFIG_ARCH_HAVE_HEAPCHECK=y
+# CONFIG_DEBUG_SYMBOLS is not set
+CONFIG_ARCH_HAVE_CUSTOMOPT=y
+# CONFIG_DEBUG_NOOPT is not set
+# CONFIG_DEBUG_CUSTOMOPT is not set
+CONFIG_DEBUG_FULLOPT=y
+
+#
+# System Type
+#
+CONFIG_ARCH_ARM=y
+# CONFIG_ARCH_AVR is not set
+# CONFIG_ARCH_HC is not set
+# CONFIG_ARCH_MIPS is not set
+# CONFIG_ARCH_RGMP is not set
+# CONFIG_ARCH_SH is not set
+# CONFIG_ARCH_SIM is not set
+# CONFIG_ARCH_X86 is not set
+# CONFIG_ARCH_Z16 is not set
+# CONFIG_ARCH_Z80 is not set
+CONFIG_ARCH="arm"
+
+#
+# ARM Options
+#
+# CONFIG_ARCH_CHIP_A1X is not set
+# CONFIG_ARCH_CHIP_C5471 is not set
+# CONFIG_ARCH_CHIP_CALYPSO is not set
+# CONFIG_ARCH_CHIP_DM320 is not set
+# CONFIG_ARCH_CHIP_IMX is not set
+# CONFIG_ARCH_CHIP_KINETIS is not set
+# CONFIG_ARCH_CHIP_KL is not set
+# CONFIG_ARCH_CHIP_LM is not set
+# CONFIG_ARCH_CHIP_LPC17XX is not set
+# CONFIG_ARCH_CHIP_LPC214X is not set
+# CONFIG_ARCH_CHIP_LPC2378 is not set
+# CONFIG_ARCH_CHIP_LPC31XX is not set
+# CONFIG_ARCH_CHIP_LPC43XX is not set
+# CONFIG_ARCH_CHIP_NUC1XX is not set
+# CONFIG_ARCH_CHIP_SAMA5 is not set
+# CONFIG_ARCH_CHIP_SAMD is not set
+# CONFIG_ARCH_CHIP_SAM34 is not set
+CONFIG_ARCH_CHIP_STM32=y
+# CONFIG_ARCH_CHIP_STR71X is not set
+# CONFIG_ARCH_ARM7TDMI is not set
+# CONFIG_ARCH_ARM926EJS is not set
+# CONFIG_ARCH_ARM920T is not set
+# CONFIG_ARCH_CORTEXM0 is not set
+# CONFIG_ARCH_CORTEXM3 is not set
+CONFIG_ARCH_CORTEXM4=y
+# CONFIG_ARCH_CORTEXA5 is not set
+# CONFIG_ARCH_CORTEXA8 is not set
+CONFIG_ARCH_FAMILY="armv7-m"
+CONFIG_ARCH_CHIP="stm32"
+# CONFIG_ARMV7M_USEBASEPRI is not set
+CONFIG_ARCH_HAVE_CMNVECTOR=y
+# CONFIG_ARMV7M_CMNVECTOR is not set
+CONFIG_ARCH_HAVE_FPU=y
+# CONFIG_ARCH_FPU is not set
+CONFIG_ARCH_HAVE_MPU=y
+# CONFIG_ARMV7M_MPU is not set
+
+#
+# ARMV7M Configuration Options
+#
+# CONFIG_ARMV7M_TOOLCHAIN_ATOLLIC is not set
+# CONFIG_ARMV7M_TOOLCHAIN_BUILDROOT is not set
+# CONFIG_ARMV7M_TOOLCHAIN_CODEREDW is not set
+CONFIG_ARMV7M_TOOLCHAIN_CODESOURCERYW=y
+# CONFIG_ARMV7M_TOOLCHAIN_DEVKITARM is not set
+# CONFIG_ARMV7M_TOOLCHAIN_GNU_EABIL is not set
+# CONFIG_ARMV7M_TOOLCHAIN_GNU_EABIW is not set
+# CONFIG_ARMV7M_TOOLCHAIN_RAISONANCE is not set
+# CONFIG_SERIAL_TERMIOS is not set
+
+#
+# STM32 Configuration Options
+#
+# CONFIG_ARCH_CHIP_STM32L151C6 is not set
+# CONFIG_ARCH_CHIP_STM32L151C8 is not set
+# CONFIG_ARCH_CHIP_STM32L151CB is not set
+# CONFIG_ARCH_CHIP_STM32L151R6 is not set
+# CONFIG_ARCH_CHIP_STM32L151R8 is not set
+# CONFIG_ARCH_CHIP_STM32L151RB is not set
+# CONFIG_ARCH_CHIP_STM32L151V6 is not set
+# CONFIG_ARCH_CHIP_STM32L151V8 is not set
+# CONFIG_ARCH_CHIP_STM32L151VB is not set
+# CONFIG_ARCH_CHIP_STM32L152C6 is not set
+# CONFIG_ARCH_CHIP_STM32L152C8 is not set
+# CONFIG_ARCH_CHIP_STM32L152CB is not set
+# CONFIG_ARCH_CHIP_STM32L152R6 is not set
+# CONFIG_ARCH_CHIP_STM32L152R8 is not set
+# CONFIG_ARCH_CHIP_STM32L152RB is not set
+# CONFIG_ARCH_CHIP_STM32L152V6 is not set
+# CONFIG_ARCH_CHIP_STM32L152V8 is not set
+# CONFIG_ARCH_CHIP_STM32L152VB is not set
+# CONFIG_ARCH_CHIP_STM32F100C8 is not set
+# CONFIG_ARCH_CHIP_STM32F100CB is not set
+# CONFIG_ARCH_CHIP_STM32F100R8 is not set
+# CONFIG_ARCH_CHIP_STM32F100RB is not set
+# CONFIG_ARCH_CHIP_STM32F100RC is not set
+# CONFIG_ARCH_CHIP_STM32F100RD is not set
+# CONFIG_ARCH_CHIP_STM32F100RE is not set
+# CONFIG_ARCH_CHIP_STM32F100V8 is not set
+# CONFIG_ARCH_CHIP_STM32F100VB is not set
+# CONFIG_ARCH_CHIP_STM32F100VC is not set
+# CONFIG_ARCH_CHIP_STM32F100VD is not set
+# CONFIG_ARCH_CHIP_STM32F100VE is not set
+# CONFIG_ARCH_CHIP_STM32F103C4 is not set
+# CONFIG_ARCH_CHIP_STM32F103C8 is not set
+# CONFIG_ARCH_CHIP_STM32F103T8 is not set
+# CONFIG_ARCH_CHIP_STM32F103TB is not set
+# CONFIG_ARCH_CHIP_STM32F103CB is not set
+# CONFIG_ARCH_CHIP_STM32F103R8 is not set
+# CONFIG_ARCH_CHIP_STM32F103RB is not set
+# CONFIG_ARCH_CHIP_STM32F103V8 is not set
+# CONFIG_ARCH_CHIP_STM32F103VB is not set
+# CONFIG_ARCH_CHIP_STM32F103RE is not set
+# CONFIG_ARCH_CHIP_STM32F103VC is not set
+# CONFIG_ARCH_CHIP_STM32F103VE is not set
+# CONFIG_ARCH_CHIP_STM32F103ZE is not set
+# CONFIG_ARCH_CHIP_STM32F105VB is not set
+# CONFIG_ARCH_CHIP_STM32F107VC is not set
+# CONFIG_ARCH_CHIP_STM32F207IG is not set
+# CONFIG_ARCH_CHIP_STM32F207ZE is not set
+# CONFIG_ARCH_CHIP_STM32F302CB is not set
+# CONFIG_ARCH_CHIP_STM32F302CC is not set
+# CONFIG_ARCH_CHIP_STM32F302RB is not set
+# CONFIG_ARCH_CHIP_STM32F302RC is not set
+# CONFIG_ARCH_CHIP_STM32F302VB is not set
+# CONFIG_ARCH_CHIP_STM32F302VC is not set
+# CONFIG_ARCH_CHIP_STM32F303CB is not set
+# CONFIG_ARCH_CHIP_STM32F303CC is not set
+# CONFIG_ARCH_CHIP_STM32F303RB is not set
+# CONFIG_ARCH_CHIP_STM32F303RC is not set
+# CONFIG_ARCH_CHIP_STM32F303VB is not set
+# CONFIG_ARCH_CHIP_STM32F303VC is not set
+# CONFIG_ARCH_CHIP_STM32F405RG is not set
+# CONFIG_ARCH_CHIP_STM32F405VG is not set
+# CONFIG_ARCH_CHIP_STM32F405ZG is not set
+# CONFIG_ARCH_CHIP_STM32F407VE is not set
+CONFIG_ARCH_CHIP_STM32F407VG=y
+# CONFIG_ARCH_CHIP_STM32F407ZE is not set
+# CONFIG_ARCH_CHIP_STM32F407ZG is not set
+# CONFIG_ARCH_CHIP_STM32F407IE is not set
+# CONFIG_ARCH_CHIP_STM32F407IG is not set
+# CONFIG_ARCH_CHIP_STM32F427V is not set
+# CONFIG_ARCH_CHIP_STM32F427Z is not set
+# CONFIG_ARCH_CHIP_STM32F427I is not set
+# CONFIG_ARCH_CHIP_STM32F429V is not set
+# CONFIG_ARCH_CHIP_STM32F429Z is not set
+# CONFIG_ARCH_CHIP_STM32F429I is not set
+# CONFIG_ARCH_CHIP_STM32F429B is not set
+# CONFIG_ARCH_CHIP_STM32F429N is not set
+# CONFIG_STM32_STM32L15XX is not set
+# CONFIG_STM32_ENERGYLITE is not set
+# CONFIG_STM32_STM32F10XX is not set
+# CONFIG_STM32_VALUELINE is not set
+# CONFIG_STM32_CONNECTIVITYLINE is not set
+# CONFIG_STM32_PERFORMANCELINE is not set
+# CONFIG_STM32_HIGHDENSITY is not set
+# CONFIG_STM32_MEDIUMDENSITY is not set
+# CONFIG_STM32_LOWDENSITY is not set
+# CONFIG_STM32_STM32F20XX is not set
+# CONFIG_STM32_STM32F30XX is not set
+CONFIG_STM32_STM32F40XX=y
+# CONFIG_STM32_DFU is not set
+
+#
+# STM32 Peripheral Support
+#
+# CONFIG_STM32_HAVE_USBDEV is not set
+CONFIG_STM32_HAVE_OTGFS=y
+# CONFIG_STM32_ADC1 is not set
+# CONFIG_STM32_ADC2 is not set
+# CONFIG_STM32_ADC3 is not set
+# CONFIG_STM32_BKPSRAM is not set
+# CONFIG_STM32_CAN1 is not set
+# CONFIG_STM32_CAN2 is not set
+# CONFIG_STM32_CCMDATARAM is not set
+# CONFIG_STM32_CRC is not set
+# CONFIG_STM32_CRYP is not set
+# CONFIG_STM32_DMA1 is not set
+# CONFIG_STM32_DMA2 is not set
+# CONFIG_STM32_DAC1 is not set
+# CONFIG_STM32_DAC2 is not set
+# CONFIG_STM32_DCMI is not set
+# CONFIG_STM32_ETHMAC is not set
+# CONFIG_STM32_FSMC is not set
+# CONFIG_STM32_HASH is not set
+# CONFIG_STM32_I2C1 is not set
+# CONFIG_STM32_I2C2 is not set
+# CONFIG_STM32_I2C3 is not set
+CONFIG_STM32_OTGFS=y
+# CONFIG_STM32_OTGHS is not set
+CONFIG_STM32_PWR=y
+# CONFIG_STM32_RNG is not set
+# CONFIG_STM32_SDIO is not set
+CONFIG_STM32_SPI1=y
+# CONFIG_STM32_SPI2 is not set
+# CONFIG_STM32_SPI3 is not set
+CONFIG_STM32_SYSCFG=y
+# CONFIG_STM32_TIM1 is not set
+# CONFIG_STM32_TIM2 is not set
+# CONFIG_STM32_TIM3 is not set
+# CONFIG_STM32_TIM4 is not set
+# CONFIG_STM32_TIM5 is not set
+# CONFIG_STM32_TIM6 is not set
+# CONFIG_STM32_TIM7 is not set
+# CONFIG_STM32_TIM8 is not set
+# CONFIG_STM32_TIM9 is not set
+# CONFIG_STM32_TIM10 is not set
+# CONFIG_STM32_TIM11 is not set
+# CONFIG_STM32_TIM12 is not set
+# CONFIG_STM32_TIM13 is not set
+# CONFIG_STM32_TIM14 is not set
+# CONFIG_STM32_USART1 is not set
+CONFIG_STM32_USART2=y
+# CONFIG_STM32_USART3 is not set
+# CONFIG_STM32_UART4 is not set
+# CONFIG_STM32_UART5 is not set
+# CONFIG_STM32_USART6 is not set
+# CONFIG_STM32_IWDG is not set
+# CONFIG_STM32_WWDG is not set
+CONFIG_STM32_SPI=y
+
+#
+# Alternate Pin Mapping
+#
+# CONFIG_STM32_FLASH_PREFETCH is not set
+# CONFIG_STM32_JTAG_DISABLE is not set
+# CONFIG_STM32_JTAG_FULL_ENABLE is not set
+# CONFIG_STM32_JTAG_NOJNTRST_ENABLE is not set
+CONFIG_STM32_JTAG_SW_ENABLE=y
+CONFIG_STM32_DISABLE_IDLE_SLEEP_DURING_DEBUG=y
+# CONFIG_STM32_FORCEPOWER is not set
+# CONFIG_ARCH_BOARD_STM32_CUSTOM_CLOCKCONFIG is not set
+# CONFIG_STM32_CCMEXCLUDE is not set
+CONFIG_STM32_USART=y
+
+#
+# U[S]ART Configuration
+#
+# CONFIG_USART2_RS485 is not set
+# CONFIG_SERIAL_DISABLE_REORDERING is not set
+# CONFIG_STM32_USART_SINGLEWIRE is not set
+
+#
+# SPI Configuration
+#
+# CONFIG_STM32_SPI_INTERRUPTS is not set
+# CONFIG_STM32_SPI_DMA is not set
+
+#
+# USB Host Configuration
+#
+
+#
+# USB Device Configuration
+#
+
+#
+# Architecture Options
+#
+# CONFIG_ARCH_NOINTC is not set
+# CONFIG_ARCH_VECNOTIRQ is not set
+# CONFIG_ARCH_DMA is not set
+CONFIG_ARCH_HAVE_IRQPRIO=y
+# CONFIG_ARCH_ADDRENV is not set
+CONFIG_ARCH_HAVE_VFORK=y
+# CONFIG_ARCH_HAVE_MMU is not set
+# CONFIG_ARCH_NAND_HWECC is not set
+# CONFIG_ARCH_IRQPRIO is not set
+CONFIG_ARCH_STACKDUMP=y
+# CONFIG_ENDIAN_BIG is not set
+# CONFIG_ARCH_IDLE_CUSTOM is not set
+# CONFIG_ARCH_HAVE_RAMFUNCS is not set
+CONFIG_ARCH_HAVE_RAMVECTORS=y
+# CONFIG_ARCH_RAMVECTORS is not set
+
+#
+# Board Settings
+#
+CONFIG_BOARD_LOOPSPERMSEC=16717
+# CONFIG_ARCH_CALIBRATION is not set
+
+#
+# Interrupt options
+#
+CONFIG_ARCH_HAVE_INTERRUPTSTACK=y
+CONFIG_ARCH_INTERRUPTSTACK=0
+CONFIG_ARCH_HAVE_HIPRI_INTERRUPT=y
+# CONFIG_ARCH_HIPRI_INTERRUPT is not set
+
+#
+# Boot options
+#
+# CONFIG_BOOT_RUNFROMEXTSRAM is not set
+CONFIG_BOOT_RUNFROMFLASH=y
+# CONFIG_BOOT_RUNFROMISRAM is not set
+# CONFIG_BOOT_RUNFROMSDRAM is not set
+# CONFIG_BOOT_COPYTORAM is not set
+
+#
+# Boot Memory Configuration
+#
+CONFIG_RAM_START=0x20000000
+CONFIG_RAM_SIZE=114688
+# CONFIG_ARCH_HAVE_SDRAM is not set
+
+#
+# Board Selection
+#
+CONFIG_ARCH_BOARD_STM32F4_DISCOVERY=y
+# CONFIG_ARCH_BOARD_MIKROE_STM32F4 is not set
+# CONFIG_ARCH_BOARD_CUSTOM is not set
+CONFIG_ARCH_BOARD="stm32f4discovery"
+
+#
+# Common Board Options
+#
+CONFIG_ARCH_HAVE_LEDS=y
+CONFIG_ARCH_LEDS=y
+CONFIG_ARCH_HAVE_BUTTONS=y
+CONFIG_ARCH_BUTTONS=y
+CONFIG_ARCH_HAVE_IRQBUTTONS=y
+# CONFIG_ARCH_IRQBUTTONS is not set
+CONFIG_NSH_MMCSDMINOR=0
+
+#
+# Board-Specific Options
+#
+
+#
+# RTOS Features
+#
+# CONFIG_BOARD_INITIALIZE is not set
+CONFIG_USEC_PER_TICK=10000
+# CONFIG_SYSTEM_TIME64 is not set
+CONFIG_RR_INTERVAL=200
+# CONFIG_SCHED_CPULOAD is not set
+# CONFIG_SCHED_INSTRUMENTATION is not set
+CONFIG_TASK_NAME_SIZE=0
+# CONFIG_SCHED_HAVE_PARENT is not set
+# CONFIG_JULIAN_TIME is not set
+CONFIG_START_YEAR=2013
+CONFIG_START_MONTH=1
+CONFIG_START_DAY=27
+# CONFIG_DEV_CONSOLE is not set
+# CONFIG_MUTEX_TYPES is not set
+# CONFIG_PRIORITY_INHERITANCE is not set
+# CONFIG_FDCLONE_DISABLE is not set
+# CONFIG_FDCLONE_STDIO is not set
+CONFIG_SDCLONE_DISABLE=y
+CONFIG_SCHED_WAITPID=y
+# CONFIG_SCHED_STARTHOOK is not set
+# CONFIG_SCHED_ATEXIT is not set
+# CONFIG_SCHED_ONEXIT is not set
+CONFIG_USER_ENTRYPOINT="nsh_main"
+CONFIG_DISABLE_OS_API=y
+# CONFIG_DISABLE_POSIX_TIMERS is not set
+# CONFIG_DISABLE_PTHREAD is not set
+# CONFIG_DISABLE_SIGNALS is not set
+# CONFIG_DISABLE_MQUEUE is not set
+# CONFIG_DISABLE_ENVIRON is not set
+
+#
+# Signal Numbers
+#
+CONFIG_SIG_SIGUSR1=1
+CONFIG_SIG_SIGUSR2=2
+CONFIG_SIG_SIGALARM=3
+CONFIG_SIG_SIGCONDTIMEDOUT=16
+
+#
+# Sizes of configurable things (0 disables)
+#
+CONFIG_MAX_TASKS=16
+CONFIG_MAX_TASK_ARGS=4
+CONFIG_NPTHREAD_KEYS=4
+CONFIG_NFILE_DESCRIPTORS=8
+CONFIG_NFILE_STREAMS=8
+CONFIG_NAME_MAX=32
+CONFIG_PREALLOC_MQ_MSGS=4
+CONFIG_MQ_MAXMSGSIZE=32
+CONFIG_MAX_WDOGPARMS=2
+CONFIG_PREALLOC_WDOGS=8
+CONFIG_WDOG_INTRESERVE=1
+CONFIG_PREALLOC_TIMERS=4
+
+#
+# Stack and heap information
+#
+CONFIG_IDLETHREAD_STACKSIZE=2048
+CONFIG_USERMAIN_STACKSIZE=2048
+CONFIG_PTHREAD_STACK_MIN=256
+CONFIG_PTHREAD_STACK_DEFAULT=2048
+
+#
+# Device Drivers
+#
+CONFIG_DISABLE_POLL=y
+CONFIG_DEV_NULL=y
+# CONFIG_DEV_ZERO is not set
+# CONFIG_LOOP is not set
+# CONFIG_RAMDISK is not set
+# CONFIG_CAN is not set
+# CONFIG_ARCH_HAVE_PWM_PULSECOUNT is not set
+# CONFIG_PWM is not set
+CONFIG_ARCH_HAVE_I2CRESET=y
+# CONFIG_I2C is not set
+CONFIG_SPI=y
+# CONFIG_SPI_OWNBUS is not set
+CONFIG_SPI_EXCHANGE=y
+# CONFIG_SPI_CMDDATA is not set
+# CONFIG_SPI_BITBANG is not set
+# CONFIG_I2S is not set
+# CONFIG_RTC is not set
+# CONFIG_WATCHDOG is not set
+# CONFIG_ANALOG is not set
+# CONFIG_AUDIO_DEVICES is not set
+# CONFIG_VIDEO_DEVICES is not set
+# CONFIG_BCH is not set
+# CONFIG_INPUT is not set
+# CONFIG_LCD is not set
+# CONFIG_MMCSD is not set
+# CONFIG_MTD is not set
+# CONFIG_PIPES is not set
+# CONFIG_PM is not set
+# CONFIG_POWER is not set
+# CONFIG_SENSORS is not set
+# CONFIG_SERCOMM_CONSOLE is not set
+CONFIG_SERIAL=y
+# CONFIG_DEV_LOWCONSOLE is not set
+CONFIG_SERIAL_REMOVABLE=y
+# CONFIG_16550_UART is not set
+# CONFIG_ARCH_HAVE_UART is not set
+# CONFIG_ARCH_HAVE_UART0 is not set
+# CONFIG_ARCH_HAVE_UART1 is not set
+# CONFIG_ARCH_HAVE_UART2 is not set
+# CONFIG_ARCH_HAVE_UART3 is not set
+# CONFIG_ARCH_HAVE_UART4 is not set
+# CONFIG_ARCH_HAVE_UART5 is not set
+# CONFIG_ARCH_HAVE_UART6 is not set
+# CONFIG_ARCH_HAVE_UART7 is not set
+# CONFIG_ARCH_HAVE_UART8 is not set
+# CONFIG_ARCH_HAVE_SCI0 is not set
+# CONFIG_ARCH_HAVE_SCI1 is not set
+# CONFIG_ARCH_HAVE_USART0 is not set
+# CONFIG_ARCH_HAVE_USART1 is not set
+CONFIG_ARCH_HAVE_USART2=y
+# CONFIG_ARCH_HAVE_USART3 is not set
+# CONFIG_ARCH_HAVE_USART4 is not set
+# CONFIG_ARCH_HAVE_USART5 is not set
+# CONFIG_ARCH_HAVE_USART6 is not set
+# CONFIG_ARCH_HAVE_USART7 is not set
+# CONFIG_ARCH_HAVE_USART8 is not set
+
+#
+# USART Configuration
+#
+CONFIG_USART2_ISUART=y
+CONFIG_MCU_SERIAL=y
+CONFIG_STANDARD_SERIAL=y
+# CONFIG_USART2_SERIAL_CONSOLE is not set
+CONFIG_NO_SERIAL_CONSOLE=y
+
+#
+# USART2 Configuration
+#
+CONFIG_USART2_RXBUFSIZE=256
+CONFIG_USART2_TXBUFSIZE=256
+CONFIG_USART2_BAUD=115200
+CONFIG_USART2_BITS=8
+CONFIG_USART2_PARITY=0
+CONFIG_USART2_2STOP=0
+# CONFIG_USART2_IFLOWCONTROL is not set
+# CONFIG_USART2_OFLOWCONTROL is not set
+# CONFIG_SERIAL_IFLOWCONTROL is not set
+# CONFIG_SERIAL_OFLOWCONTROL is not set
+CONFIG_USBDEV=y
+
+#
+# USB Device Controller Driver Options
+#
+# CONFIG_USBDEV_ISOCHRONOUS is not set
+# CONFIG_USBDEV_DUALSPEED is not set
+CONFIG_USBDEV_SELFPOWERED=y
+# CONFIG_USBDEV_BUSPOWERED is not set
+CONFIG_USBDEV_MAXPOWER=100
+# CONFIG_USBDEV_DMA is not set
+# CONFIG_USBDEV_TRACE is not set
+
+#
+# USB Device Class Driver Options
+#
+# CONFIG_USBDEV_COMPOSITE is not set
+# CONFIG_PL2303 is not set
+CONFIG_CDCACM=y
+CONFIG_CDCACM_CONSOLE=y
+CONFIG_CDCACM_EP0MAXPACKET=64
+CONFIG_CDCACM_EPINTIN=1
+CONFIG_CDCACM_EPINTIN_FSSIZE=64
+CONFIG_CDCACM_EPINTIN_HSSIZE=64
+CONFIG_CDCACM_EPBULKOUT=3
+CONFIG_CDCACM_EPBULKOUT_FSSIZE=64
+CONFIG_CDCACM_EPBULKOUT_HSSIZE=512
+CONFIG_CDCACM_EPBULKIN=2
+CONFIG_CDCACM_EPBULKIN_FSSIZE=64
+CONFIG_CDCACM_EPBULKIN_HSSIZE=512
+CONFIG_CDCACM_NWRREQS=4
+CONFIG_CDCACM_NRDREQS=4
+CONFIG_CDCACM_BULKIN_REQLEN=96
+CONFIG_CDCACM_RXBUFSIZE=256
+CONFIG_CDCACM_TXBUFSIZE=256
+CONFIG_CDCACM_VENDORID=0x0525
+CONFIG_CDCACM_PRODUCTID=0xa4a7
+CONFIG_CDCACM_VENDORSTR="NuttX"
+CONFIG_CDCACM_PRODUCTSTR="CDC/ACM Serial"
+# CONFIG_USBMSC is not set
+# CONFIG_USBHOST is not set
+# CONFIG_WIRELESS is not set
+
+#
+# System Logging Device Options
+#
+
+#
+# System Logging
+#
+# CONFIG_RAMLOG is not set
+
+#
+# Networking Support
+#
+# CONFIG_ARCH_HAVE_NET is not set
+# CONFIG_ARCH_HAVE_PHY is not set
+# CONFIG_NET is not set
+
+#
+# File Systems
+#
+
+#
+# File system configuration
+#
+# CONFIG_DISABLE_MOUNTPOINT is not set
+# CONFIG_DISABLE_PSEUDOFS_OPERATIONS is not set
+# CONFIG_FS_READABLE is not set
+# CONFIG_FS_WRITABLE is not set
+# CONFIG_FS_RAMMAP is not set
+# CONFIG_FS_FAT is not set
+# CONFIG_FS_NXFFS is not set
+# CONFIG_FS_ROMFS is not set
+# CONFIG_FS_SMARTFS is not set
+# CONFIG_FS_BINFS is not set
+# CONFIG_FS_PROCFS is not set
+
+#
+# System Logging
+#
+
+CONFIG_SYSLOG=y
+CONFIG_SYSLOG_CHAR=y
+CONFIG_SYSLOG_DEVPATH="/dev/ttyS0"
+
+#
+# Graphics Support
+#
+# CONFIG_NX is not set
+
+#
+# Memory Management
+#
+# CONFIG_MM_SMALL is not set
+CONFIG_MM_REGIONS=2
+# CONFIG_ARCH_HAVE_HEAP2 is not set
+# CONFIG_GRAN is not set
+
+#
+# Audio Support
+#
+# CONFIG_AUDIO is not set
+
+#
+# Binary Formats
+#
+# CONFIG_BINFMT_DISABLE is not set
+# CONFIG_BINFMT_EXEPATH is not set
+# CONFIG_NXFLAT is not set
+# CONFIG_ELF is not set
+CONFIG_BUILTIN=y
+# CONFIG_PIC is not set
+# CONFIG_SYMTAB_ORDEREDBYNAME is not set
+
+#
+# Library Routines
+#
+
+#
+# Standard C Library Options
+#
+CONFIG_STDIO_BUFFER_SIZE=64
+CONFIG_STDIO_LINEBUFFER=y
+CONFIG_NUNGET_CHARS=2
+CONFIG_LIB_HOMEDIR="/"
+# CONFIG_LIBM is not set
+# CONFIG_NOPRINTF_FIELDWIDTH is not set
+# CONFIG_LIBC_FLOATINGPOINT is not set
+CONFIG_LIB_RAND_ORDER=1
+# CONFIG_EOL_IS_CR is not set
+# CONFIG_EOL_IS_LF is not set
+# CONFIG_EOL_IS_BOTH_CRLF is not set
+CONFIG_EOL_IS_EITHER_CRLF=y
+# CONFIG_LIBC_EXECFUNCS is not set
+CONFIG_POSIX_SPAWN_PROXY_STACKSIZE=1024
+CONFIG_TASK_SPAWN_DEFAULT_STACKSIZE=2048
+# CONFIG_LIBC_STRERROR is not set
+# CONFIG_LIBC_PERROR_STDOUT is not set
+CONFIG_ARCH_LOWPUTC=y
+CONFIG_LIB_SENDFILE_BUFSIZE=512
+# CONFIG_ARCH_ROMGETC is not set
+# CONFIG_ARCH_OPTIMIZED_FUNCTIONS is not set
+
+#
+# Non-standard Library Support
+#
+# CONFIG_SCHED_WORKQUEUE is not set
+# CONFIG_LIB_KBDCODEC is not set
+# CONFIG_LIB_SLCDCODEC is not set
+
+#
+# Basic CXX Support
+#
+# CONFIG_C99_BOOL8 is not set
+CONFIG_HAVE_CXX=y
+CONFIG_HAVE_CXXINITIALIZE=y
+# CONFIG_CXX_NEWLONG is not set
+
+#
+# uClibc++ Standard C++ Library
+#
+# CONFIG_UCLIBCXX is not set
+
+#
+# Application Configuration
+#
+
+#
+# Built-In Applications
+#
+CONFIG_BUILTIN_PROXY_STACKSIZE=1024
+
+#
+# Examples
+#
+# CONFIG_EXAMPLES_BUTTONS is not set
+# CONFIG_EXAMPLES_CAN is not set
+# CONFIG_EXAMPLES_CONFIGDATA is not set
+# CONFIG_EXAMPLES_CXXTEST is not set
+# CONFIG_EXAMPLES_DHCPD is not set
+# CONFIG_EXAMPLES_ELF is not set
+# CONFIG_EXAMPLES_FTPC is not set
+# CONFIG_EXAMPLES_FTPD is not set
+# CONFIG_EXAMPLES_HELLO is not set
+# CONFIG_EXAMPLES_HELLOXX is not set
+# CONFIG_EXAMPLES_JSON is not set
+# CONFIG_EXAMPLES_HIDKBD is not set
+# CONFIG_EXAMPLES_KEYPADTEST is not set
+# CONFIG_EXAMPLES_IGMP is not set
+# CONFIG_EXAMPLES_LCDRW is not set
+# CONFIG_EXAMPLES_MM is not set
+# CONFIG_EXAMPLES_MODBUS is not set
+# CONFIG_EXAMPLES_MOUNT is not set
+# CONFIG_EXAMPLES_NRF24L01TERM is not set
+CONFIG_EXAMPLES_NSH=y
+CONFIG_EXAMPLES_NSH_CXXINITIALIZE=y
+# CONFIG_EXAMPLES_NULL is not set
+# CONFIG_EXAMPLES_NX is not set
+# CONFIG_EXAMPLES_NXTERM is not set
+# CONFIG_EXAMPLES_NXFFS is not set
+# CONFIG_EXAMPLES_NXFLAT is not set
+# CONFIG_EXAMPLES_NXHELLO is not set
+# CONFIG_EXAMPLES_NXIMAGE is not set
+# CONFIG_EXAMPLES_NXLINES is not set
+# CONFIG_EXAMPLES_NXTEXT is not set
+# CONFIG_EXAMPLES_OSTEST is not set
+# CONFIG_EXAMPLES_PASHELLO is not set
+# CONFIG_EXAMPLES_PIPE is not set
+# CONFIG_EXAMPLES_POSIXSPAWN is not set
+# CONFIG_EXAMPLES_QENCODER is not set
+# CONFIG_EXAMPLES_RGMP is not set
+# CONFIG_EXAMPLES_ROMFS is not set
+# CONFIG_EXAMPLES_SENDMAIL is not set
+# CONFIG_EXAMPLES_SERLOOP is not set
+# CONFIG_EXAMPLES_SLCD is not set
+# CONFIG_EXAMPLES_SMART_TEST is not set
+# CONFIG_EXAMPLES_SMART is not set
+# CONFIG_EXAMPLES_TCPECHO is not set
+# CONFIG_EXAMPLES_TELNETD is not set
+# CONFIG_EXAMPLES_THTTPD is not set
+# CONFIG_EXAMPLES_TIFF is not set
+# CONFIG_EXAMPLES_TOUCHSCREEN is not set
+# CONFIG_EXAMPLES_UDP is not set
+# CONFIG_EXAMPLES_WEBSERVER is not set
+# CONFIG_EXAMPLES_USBSERIAL is not set
+# CONFIG_EXAMPLES_USBTERM is not set
+# CONFIG_EXAMPLES_WATCHDOG is not set
+
+#
+# Graphics Support
+#
+# CONFIG_TIFF is not set
+
+#
+# Interpreters
+#
+# CONFIG_INTERPRETERS_FICL is not set
+# CONFIG_INTERPRETERS_PCODE is not set
+
+#
+# Network Utilities
+#
+
+#
+# Networking Utilities
+#
+# CONFIG_NETUTILS_CODECS is not set
+# CONFIG_NETUTILS_DHCPD is not set
+# CONFIG_NETUTILS_FTPC is not set
+# CONFIG_NETUTILS_FTPD is not set
+# CONFIG_NETUTILS_JSON is not set
+# CONFIG_NETUTILS_SMTP is not set
+# CONFIG_NETUTILS_TFTPC is not set
+# CONFIG_NETUTILS_THTTPD is not set
+# CONFIG_NETUTILS_NETLIB is not set
+# CONFIG_NETUTILS_WEBCLIENT is not set
+
+#
+# FreeModBus
+#
+# CONFIG_MODBUS is not set
+
+#
+# NSH Library
+#
+CONFIG_NSH_LIBRARY=y
+CONFIG_NSH_READLINE=y
+# CONFIG_NSH_CLE is not set
+CONFIG_NSH_BUILTIN_APPS=y
+
+#
+# Disable Individual commands
+#
+# CONFIG_NSH_DISABLE_ADDROUTE is not set
+# CONFIG_NSH_DISABLE_CAT is not set
+# CONFIG_NSH_DISABLE_CD is not set
+# CONFIG_NSH_DISABLE_CP is not set
+# CONFIG_NSH_DISABLE_CMP is not set
+# CONFIG_NSH_DISABLE_DD is not set
+# CONFIG_NSH_DISABLE_DF is not set
+# CONFIG_NSH_DISABLE_DELROUTE is not set
+# CONFIG_NSH_DISABLE_ECHO is not set
+# CONFIG_NSH_DISABLE_EXEC is not set
+# CONFIG_NSH_DISABLE_EXIT is not set
+# CONFIG_NSH_DISABLE_FREE is not set
+# CONFIG_NSH_DISABLE_GET is not set
+# CONFIG_NSH_DISABLE_HELP is not set
+# CONFIG_NSH_DISABLE_HEXDUMP is not set
+# CONFIG_NSH_DISABLE_IFCONFIG is not set
+# CONFIG_NSH_DISABLE_KILL is not set
+# CONFIG_NSH_DISABLE_LOSETUP is not set
+# CONFIG_NSH_DISABLE_LS is not set
+# CONFIG_NSH_DISABLE_MB is not set
+# CONFIG_NSH_DISABLE_MKDIR is not set
+# CONFIG_NSH_DISABLE_MKFIFO is not set
+# CONFIG_NSH_DISABLE_MKRD is not set
+# CONFIG_NSH_DISABLE_MH is not set
+# CONFIG_NSH_DISABLE_MOUNT is not set
+# CONFIG_NSH_DISABLE_MW is not set
+# CONFIG_NSH_DISABLE_PS is not set
+# CONFIG_NSH_DISABLE_PUT is not set
+# CONFIG_NSH_DISABLE_PWD is not set
+# CONFIG_NSH_DISABLE_RM is not set
+# CONFIG_NSH_DISABLE_RMDIR is not set
+# CONFIG_NSH_DISABLE_SET is not set
+# CONFIG_NSH_DISABLE_SH is not set
+# CONFIG_NSH_DISABLE_SLEEP is not set
+# CONFIG_NSH_DISABLE_TEST is not set
+# CONFIG_NSH_DISABLE_UMOUNT is not set
+# CONFIG_NSH_DISABLE_UNSET is not set
+# CONFIG_NSH_DISABLE_USLEEP is not set
+# CONFIG_NSH_DISABLE_WGET is not set
+# CONFIG_NSH_DISABLE_XD is not set
+
+#
+# Configure Command Options
+#
+CONFIG_NSH_CMDOPT_DF_H=y
+CONFIG_NSH_CODECS_BUFSIZE=128
+CONFIG_NSH_CMDOPT_HEXDUMP=y
+CONFIG_NSH_FILEIOSIZE=512
+CONFIG_NSH_LINELEN=64
+# CONFIG_NSH_DISABLE_SEMICOLON is not set
+CONFIG_NSH_CMDPARMS=y
+CONFIG_NSH_TMPDIR="/tmp"
+CONFIG_NSH_MAXARGUMENTS=6
+CONFIG_NSH_ARGCAT=y
+CONFIG_NSH_NESTDEPTH=3
+# CONFIG_NSH_DISABLESCRIPT is not set
+# CONFIG_NSH_DISABLE_ITEF is not set
+# CONFIG_NSH_DISABLE_LOOPS is not set
+# CONFIG_NSH_DISABLEBG is not set
+CONFIG_NSH_CONSOLE=y
+# CONFIG_NSH_USBCONSOLE is not set
+
+#
+# USB Trace Support
+#
+# CONFIG_NSH_ALTCONDEV is not set
+CONFIG_NSH_ARCHINIT=y
+
+#
+# NxWidgets/NxWM
+#
+
+#
+# Platform-specific Support
+#
+# CONFIG_PLATFORM_CONFIGDATA is not set
+
+#
+# System Libraries and NSH Add-Ons
+#
+
+#
+# USB CDC/ACM Device Commands
+#
+# CONFIG_SYSTEM_CDCACM is not set
+
+#
+# USB Composite Device Commands
+#
+
+#
+# Custom Free Memory Command
+#
+# CONFIG_SYSTEM_FREE is not set
+
+#
+# I2C tool
+#
+
+#
+# INI File Parser
+#
+# CONFIG_SYSTEM_INIFILE is not set
+
+#
+# FLASH Program Installation
+#
+# CONFIG_SYSTEM_INSTALL is not set
+
+#
+# FLASH Erase-all Command
+#
+
+#
+# NxPlayer media player library / command Line
+#
+# CONFIG_SYSTEM_NXPLAYER is not set
+
+#
+# RAM test
+#
+# CONFIG_SYSTEM_RAMTEST is not set
+
+#
+# readline()
+#
+CONFIG_SYSTEM_READLINE=y
+CONFIG_READLINE_ECHO=y
+
+#
+# Power Off
+#
+# CONFIG_SYSTEM_POWEROFF is not set
+
+#
+# RAMTRON
+#
+# CONFIG_SYSTEM_RAMTRON is not set
+
+#
+# SD Card
+#
+# CONFIG_SYSTEM_SDCARD is not set
+
+#
+# Sysinfo
+#
+# CONFIG_SYSTEM_SYSINFO is not set
+
+#
+# USB Monitor
+#
+
+#
+# EMACS-like Command Line Editor
+#
+# CONFIG_SYSTEM_CLE is not set
+
+#
+# VI Work-Alike Editor
+#
+# CONFIG_SYSTEM_VI is not set
+
+#
+# Stack Monitor
+#
+
+#
+# USB Mass Storage Device Commands
+#
+
+#
+# Zmodem Commands
+#
+# CONFIG_SYSTEM_ZMODEM is not set
diff --git a/nuttx/configs/px4fmu-v2/usbnsh/setenv.sh b/nuttx/configs/px4fmu-v2/usbnsh/setenv.sh
new file mode 100755
index 000000000..5cc70c6ff
--- /dev/null
+++ b/nuttx/configs/px4fmu-v2/usbnsh/setenv.sh
@@ -0,0 +1,76 @@
+#!/bin/bash
+# configs/stm32f4discovery/usbnsh/setenv.sh
+#
+#   Copyright (C) 2013 Gregory Nutt. All rights reserved.
+#   Author: Gregory Nutt <gnutt@nuttx.org>
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions
+# are met:
+#
+# 1. Redistributions of source code must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+# 2. Redistributions in binary form must reproduce the above copyright
+#    notice, this list of conditions and the following disclaimer in
+#    the documentation and/or other materials provided with the
+#    distribution.
+# 3. Neither the name NuttX nor the names of its contributors may be
+#    used to endorse or promote products derived from this software
+#    without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+#
+
+if [ "$_" = "$0" ] ; then
+  echo "You must source this script, not run it!" 1>&2
+  exit 1
+fi
+
+WD=`pwd`
+if [ ! -x "setenv.sh" ]; then
+  echo "This script must be executed from the top-level NuttX build directory"
+  exit 1
+fi
+
+if [ -z "${PATH_ORIG}" ]; then
+  export PATH_ORIG="${PATH}"
+fi
+
+# This is the Cygwin path to the location where I installed the RIDE
+# toolchain under windows.  You will also have to edit this if you install
+# the RIDE toolchain in any other location
+#export TOOLCHAIN_BIN="/cygdrive/c/Program Files (x86)/Raisonance/Ride/arm-gcc/bin"
+
+# This is the Cygwin path to the location where I installed the CodeSourcery
+# toolchain under windows.  You will also have to edit this if you install
+# the CodeSourcery toolchain in any other location
+export TOOLCHAIN_BIN="/cygdrive/c/Program Files (x86)/CodeSourcery/Sourcery G++ Lite/bin"
+#export TOOLCHAIN_BIN="/cygdrive/c/Users/MyName/MentorGraphics/Sourcery_CodeBench_Lite_for_ARM_EABI/bin"
+
+# These are the Cygwin paths to the locations where I installed the Atollic
+# toolchain under windows.  You will also have to edit this if you install
+# the Atollic toolchain in any other location.  /usr/bin is added before
+# the Atollic bin path because there is are binaries named gcc.exe and g++.exe
+# at those locations as well.
+#export TOOLCHAIN_BIN="/usr/bin:/cygdrive/c/Program Files (x86)/Atollic/TrueSTUDIO for ARM Pro 2.3.0/ARMTools/bin"
+#export TOOLCHAIN_BIN="/usr/bin:/cygdrive/c/Program Files (x86)/Atollic/TrueSTUDIO for STMicroelectronics STM32 Lite 2.3.0/ARMTools/bin"
+
+# This is the Cygwin path to the location where I build the buildroot
+# toolchain.
+#export TOOLCHAIN_BIN="${WD}/../misc/buildroot/build_arm_nofpu/staging_dir/bin"
+
+# Add the path to the toolchain to the PATH varialble
+export PATH="${TOOLCHAIN_BIN}:/sbin:/usr/sbin:${PATH_ORIG}"
+
+echo "PATH : ${PATH}"
diff --git a/nuttx/configs/px4fmu-v2/winbuild/Make.defs b/nuttx/configs/px4fmu-v2/winbuild/Make.defs
new file mode 100644
index 000000000..59598834d
--- /dev/null
+++ b/nuttx/configs/px4fmu-v2/winbuild/Make.defs
@@ -0,0 +1,102 @@
+############################################################################
+# configs/stm32f4discovery/winbuild/Make.defs
+#
+#   Copyright (C) 2011-2012 Gregory Nutt. All rights reserved.
+#   Author: Gregory Nutt <gnutt@nuttx.org>
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions
+# are met:
+#
+# 1. Redistributions of source code must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+# 2. Redistributions in binary form must reproduce the above copyright
+#    notice, this list of conditions and the following disclaimer in
+#    the documentation and/or other materials provided with the
+#    distribution.
+# 3. Neither the name NuttX nor the names of its contributors may be
+#    used to endorse or promote products derived from this software
+#    without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+#
+############################################################################
+
+include ${TOPDIR}\.config
+include ${TOPDIR}\tools\Config.mk
+include ${TOPDIR}\arch\arm\src\armv7-m\Toolchain.defs
+
+LDSCRIPT = ld.script
+
+ARCHINCLUDES = -I. -isystem $(TOPDIR)\include
+ARCHXXINCLUDES = -I. -isystem $(TOPDIR)\include -isystem $(TOPDIR)\include\cxx
+ARCHSCRIPT = -T$(TOPDIR)\configs\$(CONFIG_ARCH_BOARD)\scripts\$(LDSCRIPT)
+
+CC = $(CROSSDEV)gcc.exe
+CXX = $(CROSSDEV)g++.exe
+CPP = $(CROSSDEV)gcc.exe -E
+LD = $(CROSSDEV)ld.exe
+AR = $(ARCROSSDEV)ar.exe rcs
+NM = $(ARCROSSDEV)nm.exe
+OBJCOPY = $(CROSSDEV)objcopy.exe
+OBJDUMP = $(CROSSDEV)objdump.exe
+
+ARCHCCVERSION = ${shell $(CC) -v 2>&1 | sed -n '/^gcc version/p' | sed -e 's/^gcc version \([0-9\.]\)/\1/g' -e 's/[-\ ].*//g' -e '1q'}
+ARCHCCMAJOR = ${shell echo $(ARCHCCVERSION) | cut -d'.' -f1}
+
+ifeq ($(CONFIG_DEBUG_SYMBOLS),y)
+  ARCHOPTIMIZATION = -g
+endif
+
+ifneq ($(CONFIG_DEBUG_NOOPT),y)
+  ARCHOPTIMIZATION += $(MAXOPTIMIZATION) -fno-strict-aliasing -fno-strength-reduce -fomit-frame-pointer
+endif
+
+ARCHCFLAGS = -fno-builtin
+ARCHCXXFLAGS = -fno-builtin -fno-exceptions -fno-rtti
+ARCHWARNINGS = -Wall -Wstrict-prototypes -Wshadow
+ARCHWARNINGSXX = -Wall -Wshadow
+ARCHDEFINES =
+ARCHPICFLAGS = -fpic -msingle-pic-base -mpic-register=r10
+
+CFLAGS = $(ARCHCFLAGS) $(ARCHWARNINGS) $(ARCHOPTIMIZATION) $(ARCHCPUFLAGS) $(ARCHINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES) -pipe
+CPICFLAGS = $(ARCHPICFLAGS) $(CFLAGS)
+CXXFLAGS = $(ARCHCXXFLAGS) $(ARCHWARNINGSXX) $(ARCHOPTIMIZATION) $(ARCHCPUFLAGS) $(ARCHXXINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES) -pipe
+CXXPICFLAGS = $(ARCHPICFLAGS) $(CXXFLAGS)
+CPPFLAGS = $(ARCHINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES)
+AFLAGS = $(CFLAGS) -D__ASSEMBLY__
+
+NXFLATLDFLAGS1 = -r -d -warn-common
+NXFLATLDFLAGS2 = $(NXFLATLDFLAGS1) -T$(TOPDIR)\binfmt\libnxflat\gnu-nxflat-pcrel.ld -no-check-sections
+LDNXFLATFLAGS = -e main -s 2048
+
+OBJEXT = .o
+LIBEXT = .a
+EXEEXT =
+
+LDFLAGS += -nostartfiles -nodefaultlibs
+ifeq ($(CONFIG_DEBUG_SYMBOLS),y)
+  LDFLAGS += -g
+endif
+
+HOSTCC = mingw32-gcc.exe
+HOSTINCLUDES = -I.
+HOSTCFLAGS = -Wall -Wstrict-prototypes -Wshadow -g -pipe
+HOSTLDFLAGS =
+HOSTEXEEXT = .exe
+
+# Windows-native host tools
+
+MKDEP = $(TOPDIR)\tools\mkdeps.exe --winnative
+
diff --git a/nuttx/configs/px4fmu-v2/winbuild/defconfig b/nuttx/configs/px4fmu-v2/winbuild/defconfig
new file mode 100644
index 000000000..ae935233c
--- /dev/null
+++ b/nuttx/configs/px4fmu-v2/winbuild/defconfig
@@ -0,0 +1,578 @@
+#
+# Automatically generated file; DO NOT EDIT.
+# Nuttx/ Configuration
+#
+
+#
+# Build Setup
+#
+# CONFIG_EXPERIMENTAL is not set
+# CONFIG_HOST_LINUX is not set
+# CONFIG_HOST_OSX is not set
+CONFIG_HOST_WINDOWS=y
+# CONFIG_HOST_OTHER is not set
+CONFIG_WINDOWS_NATIVE=y
+# CONFIG_WINDOWS_CYGWIN is not set
+# CONFIG_WINDOWS_MSYS is not set
+# CONFIG_WINDOWS_OTHER is not set
+# CONFIG_WINDOWS_MKLINK is not set
+
+#
+# Build Configuration
+#
+# CONFIG_APPS_DIR="../apps"
+# CONFIG_BUILD_2PASS is not set
+
+#
+# Binary Output Formats
+#
+# CONFIG_RRLOAD_BINARY is not set
+CONFIG_INTELHEX_BINARY=y
+# CONFIG_MOTOROLA_SREC is not set
+CONFIG_RAW_BINARY=y
+
+#
+# Customize Header Files
+#
+# CONFIG_ARCH_STDBOOL_H is not set
+# CONFIG_ARCH_MATH_H is not set
+# CONFIG_ARCH_FLOAT_H is not set
+# CONFIG_ARCH_STDARG_H is not set
+
+#
+# Debug Options
+#
+# CONFIG_DEBUG is not set
+# CONFIG_DEBUG_SYMBOLS is not set
+
+#
+# System Type
+#
+CONFIG_ARCH_ARM=y
+# CONFIG_ARCH_AVR is not set
+# CONFIG_ARCH_HC is not set
+# CONFIG_ARCH_MIPS is not set
+# CONFIG_ARCH_RGMP is not set
+# CONFIG_ARCH_SH is not set
+# CONFIG_ARCH_SIM is not set
+# CONFIG_ARCH_X86 is not set
+# CONFIG_ARCH_Z16 is not set
+# CONFIG_ARCH_Z80 is not set
+CONFIG_ARCH="arm"
+
+#
+# ARM Options
+#
+# CONFIG_ARCH_CHIP_C5471 is not set
+# CONFIG_ARCH_CHIP_CALYPSO is not set
+# CONFIG_ARCH_CHIP_DM320 is not set
+# CONFIG_ARCH_CHIP_IMX is not set
+# CONFIG_ARCH_CHIP_KINETIS is not set
+# CONFIG_ARCH_CHIP_LM3S is not set
+# CONFIG_ARCH_CHIP_LPC17XX is not set
+# CONFIG_ARCH_CHIP_LPC214X is not set
+# CONFIG_ARCH_CHIP_LPC2378 is not set
+# CONFIG_ARCH_CHIP_LPC31XX is not set
+# CONFIG_ARCH_CHIP_LPC43XX is not set
+# CONFIG_ARCH_CHIP_SAM3U is not set
+CONFIG_ARCH_CHIP_STM32=y
+# CONFIG_ARCH_CHIP_STR71X is not set
+CONFIG_ARCH_CORTEXM4=y
+CONFIG_ARCH_FAMILY="armv7-m"
+CONFIG_ARCH_CHIP="stm32"
+CONFIG_ARCH_HAVE_CMNVECTOR=y
+# CONFIG_ARMV7M_CMNVECTOR is not set
+# CONFIG_ARCH_FPU is not set
+CONFIG_ARCH_HAVE_MPU=y
+# CONFIG_ARMV7M_MPU is not set
+# CONFIG_ARCH_IRQPRIO is not set
+CONFIG_BOARD_LOOPSPERMSEC=16717
+# CONFIG_ARCH_CALIBRATION is not set
+# CONFIG_SERIAL_TERMIOS is not set
+
+#
+# STM32 Configuration Options
+#
+# CONFIG_ARCH_CHIP_STM32F100C8 is not set
+# CONFIG_ARCH_CHIP_STM32F100CB is not set
+# CONFIG_ARCH_CHIP_STM32F100R8 is not set
+# CONFIG_ARCH_CHIP_STM32F100RB is not set
+# CONFIG_ARCH_CHIP_STM32F100RC is not set
+# CONFIG_ARCH_CHIP_STM32F100RD is not set
+# CONFIG_ARCH_CHIP_STM32F100RE is not set
+# CONFIG_ARCH_CHIP_STM32F100V8 is not set
+# CONFIG_ARCH_CHIP_STM32F100VB is not set
+# CONFIG_ARCH_CHIP_STM32F100VC is not set
+# CONFIG_ARCH_CHIP_STM32F100VD is not set
+# CONFIG_ARCH_CHIP_STM32F100VE is not set
+# CONFIG_ARCH_CHIP_STM32F103RE is not set
+# CONFIG_ARCH_CHIP_STM32F103VC is not set
+# CONFIG_ARCH_CHIP_STM32F103VE is not set
+# CONFIG_ARCH_CHIP_STM32F103ZE is not set
+# CONFIG_ARCH_CHIP_STM32F105VB is not set
+# CONFIG_ARCH_CHIP_STM32F107VC is not set
+# CONFIG_ARCH_CHIP_STM32F207IG is not set
+# CONFIG_ARCH_CHIP_STM32F405RG is not set
+# CONFIG_ARCH_CHIP_STM32F405VG is not set
+# CONFIG_ARCH_CHIP_STM32F405ZG is not set
+# CONFIG_ARCH_CHIP_STM32F407VE is not set
+CONFIG_ARCH_CHIP_STM32F407VG=y
+# CONFIG_ARCH_CHIP_STM32F407ZE is not set
+# CONFIG_ARCH_CHIP_STM32F407ZG is not set
+# CONFIG_ARCH_CHIP_STM32F407IE is not set
+# CONFIG_ARCH_CHIP_STM32F407IG is not set
+CONFIG_STM32_STM32F40XX=y
+CONFIG_ARMV7M_TOOLCHAIN_CODESOURCERYW=y
+# CONFIG_ARMV7M_TOOLCHAIN_CODESOURCERYL is not set
+# CONFIG_ARMV7M_TOOLCHAIN_ATOLLIC is not set
+# CONFIG_ARMV7M_TOOLCHAIN_DEVKITARM is not set
+# CONFIG_ARMV7M_TOOLCHAIN_RAISONANCE is not set
+# CONFIG_ARMV7M_TOOLCHAIN_BUILDROOT is not set
+# CONFIG_STM32_DFU is not set
+
+#
+# STM32 Peripheral Support
+#
+# CONFIG_STM32_ADC1 is not set
+# CONFIG_STM32_ADC2 is not set
+# CONFIG_STM32_ADC3 is not set
+# CONFIG_STM32_BKPSRAM is not set
+# CONFIG_STM32_CAN1 is not set
+# CONFIG_STM32_CAN2 is not set
+# CONFIG_STM32_CCMDATARAM is not set
+# CONFIG_STM32_CRC is not set
+# CONFIG_STM32_CRYP is not set
+# CONFIG_STM32_DMA1 is not set
+# CONFIG_STM32_DMA2 is not set
+# CONFIG_STM32_DAC1 is not set
+# CONFIG_STM32_DAC2 is not set
+# CONFIG_STM32_DCMI is not set
+# CONFIG_STM32_ETHMAC is not set
+# CONFIG_STM32_FSMC is not set
+# CONFIG_STM32_HASH is not set
+# CONFIG_STM32_I2C1 is not set
+# CONFIG_STM32_I2C2 is not set
+# CONFIG_STM32_I2C3 is not set
+# CONFIG_STM32_IWDG is not set
+# CONFIG_STM32_OTGFS is not set
+# CONFIG_STM32_OTGHS is not set
+# CONFIG_STM32_PWR is not set
+# CONFIG_STM32_RNG is not set
+# CONFIG_STM32_SDIO is not set
+# CONFIG_STM32_SPI1 is not set
+# CONFIG_STM32_SPI2 is not set
+# CONFIG_STM32_SPI3 is not set
+CONFIG_STM32_SYSCFG=y
+# CONFIG_STM32_TIM1 is not set
+# CONFIG_STM32_TIM2 is not set
+# CONFIG_STM32_TIM3 is not set
+# CONFIG_STM32_TIM4 is not set
+# CONFIG_STM32_TIM5 is not set
+# CONFIG_STM32_TIM6 is not set
+# CONFIG_STM32_TIM7 is not set
+# CONFIG_STM32_TIM8 is not set
+# CONFIG_STM32_TIM9 is not set
+# CONFIG_STM32_TIM10 is not set
+# CONFIG_STM32_TIM11 is not set
+# CONFIG_STM32_TIM12 is not set
+# CONFIG_STM32_TIM13 is not set
+# CONFIG_STM32_TIM14 is not set
+# CONFIG_STM32_USART1 is not set
+CONFIG_STM32_USART2=y
+# CONFIG_STM32_USART3 is not set
+# CONFIG_STM32_UART4 is not set
+# CONFIG_STM32_UART5 is not set
+# CONFIG_STM32_USART6 is not set
+# CONFIG_STM32_WWDG is not set
+
+#
+# Alternate Pin Mapping
+#
+# CONFIG_STM32_JTAG_DISABLE is not set
+# CONFIG_STM32_JTAG_FULL_ENABLE is not set
+# CONFIG_STM32_JTAG_NOJNTRST_ENABLE is not set
+CONFIG_STM32_JTAG_SW_ENABLE=y
+# CONFIG_STM32_FORCEPOWER is not set
+# CONFIG_ARCH_BOARD_STM32_CUSTOM_CLOCKCONFIG is not set
+# CONFIG_STM32_CCMEXCLUDE is not set
+
+#
+# USB Host Configuration
+#
+
+#
+# Architecture Options
+#
+# CONFIG_ARCH_NOINTC is not set
+# CONFIG_ARCH_DMA is not set
+CONFIG_ARCH_STACKDUMP=y
+
+#
+# Board Settings
+#
+CONFIG_RAM_START=0x20000000
+CONFIG_RAM_SIZE=114688
+CONFIG_ARCH_HAVE_INTERRUPTSTACK=y
+CONFIG_ARCH_INTERRUPTSTACK=0
+
+#
+# Boot options
+#
+# CONFIG_BOOT_RUNFROMEXTSRAM is not set
+CONFIG_BOOT_RUNFROMFLASH=y
+# CONFIG_BOOT_RUNFROMISRAM is not set
+# CONFIG_BOOT_RUNFROMSDRAM is not set
+# CONFIG_BOOT_COPYTORAM is not set
+
+#
+# Board Selection
+#
+CONFIG_ARCH_BOARD_STM32F4_DISCOVERY=y
+# CONFIG_ARCH_BOARD_CUSTOM is not set
+CONFIG_ARCH_BOARD="stm32f4discovery"
+
+#
+# Common Board Options
+#
+CONFIG_ARCH_HAVE_LEDS=y
+CONFIG_ARCH_LEDS=y
+CONFIG_ARCH_HAVE_BUTTONS=y
+# CONFIG_ARCH_BUTTONS is not set
+CONFIG_ARCH_HAVE_IRQBUTTONS=y
+
+#
+# Board-Specific Options
+#
+
+#
+# RTOS Features
+#
+CONFIG_USEC_PER_TICK=10000
+CONFIG_RR_INTERVAL=200
+# CONFIG_SCHED_INSTRUMENTATION is not set
+CONFIG_TASK_NAME_SIZE=0
+# CONFIG_JULIAN_TIME is not set
+CONFIG_START_YEAR=2009
+CONFIG_START_MONTH=9
+CONFIG_START_DAY=21
+CONFIG_DEV_CONSOLE=y
+# CONFIG_MUTEX_TYPES is not set
+# CONFIG_PRIORITY_INHERITANCE is not set
+# CONFIG_FDCLONE_DISABLE is not set
+# CONFIG_FDCLONE_STDIO is not set
+CONFIG_SDCLONE_DISABLE=y
+# CONFIG_SCHED_WORKQUEUE is not set
+# CONFIG_SCHED_WAITPID is not set
+# CONFIG_SCHED_ATEXIT is not set
+# CONFIG_SCHED_ONEXIT is not set
+CONFIG_USER_ENTRYPOINT="ostest_main"
+CONFIG_DISABLE_OS_API=y
+# CONFIG_DISABLE_POSIX_TIMERS is not set
+# CONFIG_DISABLE_PTHREAD is not set
+# CONFIG_DISABLE_SIGNALS is not set
+# CONFIG_DISABLE_MQUEUE is not set
+CONFIG_DISABLE_MOUNTPOINT=y
+CONFIG_DISABLE_ENVIRON=y
+CONFIG_DISABLE_POLL=y
+
+#
+# Sizes of configurable things (0 disables)
+#
+CONFIG_MAX_TASKS=16
+CONFIG_MAX_TASK_ARGS=4
+CONFIG_NPTHREAD_KEYS=4
+CONFIG_NFILE_DESCRIPTORS=8
+CONFIG_NFILE_STREAMS=8
+CONFIG_NAME_MAX=32
+CONFIG_PREALLOC_MQ_MSGS=4
+CONFIG_MQ_MAXMSGSIZE=32
+CONFIG_MAX_WDOGPARMS=2
+CONFIG_PREALLOC_WDOGS=4
+CONFIG_WDOG_INTRESERVE=0
+CONFIG_PREALLOC_TIMERS=4
+
+#
+# Stack and heap information
+#
+CONFIG_IDLETHREAD_STACKSIZE=1024
+CONFIG_USERMAIN_STACKSIZE=2048
+CONFIG_PTHREAD_STACK_MIN=256
+CONFIG_PTHREAD_STACK_DEFAULT=2048
+
+#
+# Device Drivers
+#
+CONFIG_DEV_NULL=y
+# CONFIG_DEV_ZERO is not set
+# CONFIG_LOOP is not set
+# CONFIG_RAMDISK is not set
+# CONFIG_CAN is not set
+# CONFIG_PWM is not set
+# CONFIG_I2C is not set
+CONFIG_ARCH_HAVE_I2CRESET=y
+# CONFIG_SPI is not set
+# CONFIG_RTC is not set
+# CONFIG_WATCHDOG is not set
+# CONFIG_ANALOG is not set
+# CONFIG_BCH is not set
+# CONFIG_INPUT is not set
+# CONFIG_LCD is not set
+# CONFIG_MMCSD is not set
+# CONFIG_MTD is not set
+# CONFIG_PIPES is not set
+# CONFIG_PM is not set
+# CONFIG_POWER is not set
+# CONFIG_SENSORS is not set
+# CONFIG_SERCOMM_CONSOLE is not set
+CONFIG_SERIAL=y
+CONFIG_DEV_LOWCONSOLE=y
+# CONFIG_16550_UART is not set
+CONFIG_ARCH_HAVE_USART2=y
+CONFIG_MCU_SERIAL=y
+CONFIG_STANDARD_SERIAL=y
+CONFIG_USART2_SERIAL_CONSOLE=y
+# CONFIG_NO_SERIAL_CONSOLE is not set
+
+#
+# USART2 Configuration
+#
+CONFIG_USART2_RXBUFSIZE=128
+CONFIG_USART2_TXBUFSIZE=128
+CONFIG_USART2_BAUD=115200
+CONFIG_USART2_BITS=8
+CONFIG_USART2_PARITY=0
+CONFIG_USART2_2STOP=0
+# CONFIG_USBDEV is not set
+# CONFIG_USBHOST is not set
+# CONFIG_WIRELESS is not set
+
+#
+# System Logging Device Options
+#
+
+#
+# System Logging
+#
+# CONFIG_RAMLOG is not set
+
+#
+# Networking Support
+#
+# CONFIG_NET is not set
+
+#
+# File Systems
+#
+
+#
+# File system configuration
+#
+# CONFIG_FS_RAMMAP is not set
+
+#
+# System Logging
+#
+# CONFIG_SYSLOG is not set
+
+#
+# Graphics Support
+#
+# CONFIG_NX is not set
+
+#
+# Memory Management
+#
+# CONFIG_MM_SMALL is not set
+CONFIG_MM_REGIONS=2
+# CONFIG_GRAN is not set
+
+#
+# Binary Formats
+#
+# CONFIG_BINFMT_DISABLE is not set
+# CONFIG_NXFLAT is not set
+# CONFIG_ELF is not set
+CONFIG_SYMTAB_ORDEREDBYNAME=y
+
+#
+# Library Routines
+#
+CONFIG_STDIO_BUFFER_SIZE=64
+CONFIG_STDIO_LINEBUFFER=y
+CONFIG_NUNGET_CHARS=2
+# CONFIG_LIBM is not set
+# CONFIG_NOPRINTF_FIELDWIDTH is not set
+# CONFIG_LIBC_FLOATINGPOINT is not set
+# CONFIG_EOL_IS_CR is not set
+# CONFIG_EOL_IS_LF is not set
+# CONFIG_EOL_IS_BOTH_CRLF is not set
+CONFIG_EOL_IS_EITHER_CRLF=y
+# CONFIG_LIBC_STRERROR is not set
+# CONFIG_LIBC_PERROR_STDOUT is not set
+CONFIG_ARCH_LOWPUTC=y
+CONFIG_LIB_SENDFILE_BUFSIZE=512
+# CONFIG_ARCH_ROMGETC is not set
+# CONFIG_ARCH_OPTIMIZED_FUNCTIONS is not set
+
+#
+# Basic CXX Support
+#
+# CONFIG_HAVE_CXX is not set
+
+#
+# Application Configuration
+#
+
+#
+# Named Applications
+#
+# CONFIG_BUILTIN is not set
+
+#
+# Examples
+#
+# CONFIG_EXAMPLES_BUTTONS is not set
+# CONFIG_EXAMPLES_CAN is not set
+# CONFIG_SYSTEM_CDCACM is not set
+# CONFIG_SYSTEM_COMPOSITE is not set
+# CONFIG_EXAMPLES_DHCPD is not set
+# CONFIG_EXAMPLES_ELF is not set
+# CONFIG_EXAMPLES_FTPC is not set
+# CONFIG_EXAMPLES_FTPD is not set
+# CONFIG_EXAMPLES_HELLO is not set
+# CONFIG_EXAMPLES_HELLOXX is not set
+# CONFIG_EXAMPLES_JSON is not set
+# CONFIG_EXAMPLES_HIDKBD is not set
+# CONFIG_EXAMPLES_IGMP is not set
+# CONFIG_EXAMPLES_LCDRW is not set
+# CONFIG_EXAMPLES_MM is not set
+# CONFIG_EXAMPLES_MOUNT is not set
+# CONFIG_EXAMPLES_MODBUS is not set
+# CONFIG_EXAMPLES_NETTEST is not set
+# CONFIG_EXAMPLES_NSH is not set
+# CONFIG_EXAMPLES_NULL is not set
+# CONFIG_EXAMPLES_NX is not set
+# CONFIG_EXAMPLES_NXTERM is not set
+# CONFIG_EXAMPLES_NXFFS is not set
+# CONFIG_EXAMPLES_NXFLAT is not set
+# CONFIG_EXAMPLES_NXHELLO is not set
+# CONFIG_EXAMPLES_NXIMAGE is not set
+# CONFIG_EXAMPLES_NXLINES is not set
+# CONFIG_EXAMPLES_NXTEXT is not set
+CONFIG_EXAMPLES_OSTEST=y
+CONFIG_EXAMPLES_OSTEST_LOOPS=1
+CONFIG_EXAMPLES_OSTEST_STACKSIZE=2048
+CONFIG_EXAMPLES_OSTEST_NBARRIER_THREADS=3
+CONFIG_EXAMPLES_OSTEST_RR_RANGE=10000
+CONFIG_EXAMPLES_OSTEST_RR_RUNS=10
+# CONFIG_EXAMPLES_PASHELLO is not set
+# CONFIG_EXAMPLES_PIPE is not set
+# CONFIG_EXAMPLES_POLL is not set
+# CONFIG_EXAMPLES_QENCODER is not set
+# CONFIG_EXAMPLES_RGMP is not set
+# CONFIG_EXAMPLES_ROMFS is not set
+# CONFIG_EXAMPLES_SENDMAIL is not set
+# CONFIG_EXAMPLES_SERLOOP is not set
+# CONFIG_EXAMPLES_TELNETD is not set
+# CONFIG_EXAMPLES_THTTPD is not set
+# CONFIG_EXAMPLES_TIFF is not set
+# CONFIG_EXAMPLES_TOUCHSCREEN is not set
+# CONFIG_EXAMPLES_UDP is not set
+# CONFIG_EXAMPLES_WEBSERVER is not set
+# CONFIG_EXAMPLES_USBSERIAL is not set
+# CONFIG_SYSTEM_USBMSC is not set
+# CONFIG_EXAMPLES_USBTERM is not set
+# CONFIG_EXAMPLES_WATCHDOG is not set
+# CONFIG_EXAMPLES_WLAN is not set
+
+#
+# Interpreters
+#
+
+#
+# Interpreters
+#
+# CONFIG_INTERPRETERS_FICL is not set
+# CONFIG_INTERPRETERS_PCODE is not set
+
+#
+# Network Utilities
+#
+
+#
+# Networking Utilities
+#
+# CONFIG_NETUTILS_CODECS is not set
+# CONFIG_NETUTILS_DHCPC is not set
+# CONFIG_NETUTILS_DHCPD is not set
+# CONFIG_NETUTILS_FTPC is not set
+# CONFIG_NETUTILS_FTPD is not set
+# CONFIG_NETUTILS_JSON is not set
+# CONFIG_NETUTILS_DNSCLIENT is not set
+# CONFIG_NETUTILS_SMTP is not set
+# CONFIG_NETUTILS_TELNETD is not set
+# CONFIG_NETUTILS_TFTPC is not set
+# CONFIG_NETUTILS_THTTPD is not set
+# CONFIG_NETUTILS_NETLIB is not set
+# CONFIG_NETUTILS_WEBCLIENT is not set
+
+#
+# ModBus
+#
+
+#
+# FreeModbus
+#
+# CONFIG_MODBUS is not set
+
+#
+# NSH Library
+#
+# CONFIG_NSH_LIBRARY is not set
+
+#
+# NxWidgets/NxWM
+#
+
+#
+# System NSH Add-Ons
+#
+
+#
+# Custom Free Memory Command
+#
+# CONFIG_SYSTEM_FREE is not set
+
+#
+# I2C tool
+#
+
+#
+# FLASH Program Installation
+#
+# CONFIG_SYSTEM_INSTALL is not set
+
+#
+# readline()
+#
+# CONFIG_SYSTEM_READLINE is not set
+
+#
+# Power Off
+#
+# CONFIG_SYSTEM_POWEROFF is not set
+
+#
+# RAMTRON
+#
+# CONFIG_SYSTEM_RAMTRON is not set
+
+#
+# SD Card
+#
+# CONFIG_SYSTEM_SDCARD is not set
+
+#
+# Sysinfo
+#
+# CONFIG_SYSTEM_SYSINFO is not set
diff --git a/nuttx/configs/px4fmu-v2/winbuild/setenv.bat b/nuttx/configs/px4fmu-v2/winbuild/setenv.bat
new file mode 100755
index 000000000..5c0dee86a
--- /dev/null
+++ b/nuttx/configs/px4fmu-v2/winbuild/setenv.bat
@@ -0,0 +1,50 @@
+@echo off
+
+rem configs/stm32f4discovery/winbuild/setenv.bat
+rem
+rem   Copyright (C) 2012 Gregory Nutt. All rights reserved.
+rem   Author: Gregory Nutt <gnutt@nuttx.org>
+rem
+rem Redistribution and use in source and binary forms, with or without
+rem modification, are permitted provided that the following conditions
+rem are met:
+rem
+rem 1. Redistributions of source code must retain the above copyright
+rem    notice, this list of conditions and the following disclaimer.
+rem 2. Redistributions in binary form must reproduce the above copyright
+rem    notice, this list of conditions and the following disclaimer in
+rem    the documentation and/or other materials provided with the
+rem    distribution.
+rem 3. Neither the name NuttX nor the names of its contributors may be
+rem    used to endorse or promote products derived from this software
+rem    without specific prior written permission.
+rem
+rem THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+rem "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+rem LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+rem FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+rem COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+rem INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+rem BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+rem OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+rem AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+rem LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+rem ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+rem POSSIBILITY OF SUCH DAMAGE.
+
+rem This is the location where I installed in the MinGW compiler. With
+rem this configuration, it is recommended that you do NOT install the
+rem MSYS tools; they conflict with the GNUWin32 tools.  See
+rem http://www.mingw.org/ for further info.
+
+set PATH=C:\MinGW\bin;%PATH%
+
+rem This is the location where I installed the CodeSourcey toolchain.  See
+rem http://www.mentor.com/embedded-software/codesourcery
+
+set PATH=C:\Program Files (x86)\CodeSourcery\Sourcery G++ Lite\bin;%PATH%
+
+rem This is the location where I installed the GNUWin32 tools.  See
+rem http://gnuwin32.sourceforge.net/.
+
+set PATH=C:\gnuwin32\bin;%PATH%