Add ILI9488 header file

2 files changed, 165 insertions, 24 deletions

diff --git a/nuttx/drivers/lcd/README.txt b/nuttx/drivers/lcd/README.txt
index 522749460..10e31ecec 100644
--- a/nuttx/drivers/lcd/README.txt
+++ b/nuttx/drivers/lcd/README.txt
@@ -21,7 +21,7 @@ LCD Header files
 
       Structures and APIs needed to work with LCD drivers are provided in
       this header file.  This header file also depends on some of the same
-      definitions used for the frame buffer driver as privided in
+      definitions used for the frame buffer driver as provided in
       include/nuttx/video/fb.h.
 
   struct lcd_dev_s
@@ -106,7 +106,7 @@ Re-usable LCD drivers reside in the drivers/lcd directory:
 
   ssd12989.c.  Generic LCD driver for LCDs based on the Solomon Systech
     SSD1289 LCD controller. Think of this as a template for an LCD driver
-    that you will proably ahve to customize for any particular LCD
+    that you will probably have to customize for any particular LCD
     hardware. (see also configs/hymini-stm32v/src/ssd1289.c below).
 
   st7567.c.  LCD Display Module, ST7567, Univision Technology Inc. Used
@@ -143,7 +143,7 @@ Re-usable LCD drivers reside in the drivers/lcd directory:
   ssd1306.c.  OLED Display Modules based on the SSD1306 controllers.
     This includes the UG-2864HSWEG01 and UG2832HSWEG04, Both from Univision
     Technology Inc.  The latter is used with the OLED1 module that comes
-    with the Atmel SAM4l Xplained Pro board.  Examplel usage:
+    with the Atmel SAM4l Xplained Pro board.  Example usage:
 
       configs/stm32f4discovery
       configs/sam4l-xplained
@@ -164,67 +164,72 @@ that makes then less re-usable:
 
     configs/hymini-stm32v/src/ssd1289.c.  See also drivers/lcd/ssd1298.c
       above.
-    configs/stm32f4discovery/src/up_ssd1289.c.  This examples is the
+    configs/stm32f4discovery/src/stm32_ssd1289.c.  This examples is the
       bottom half for the SSD1289 driver at drivers/lcd/ssd1289.c
     configs/hymini-stm32v/src/ssd1289.c.  See also drivers/lcd/ssd1298.c
       above.
-    configs/shenzhou/src/up_ssd1289.c
+    configs/shenzhou/src/stm32_ssd1289.c
 
   kwikstik-k40:
 
-    configs/kwikstik-k40/src/up_lcd.c.  Don't waste your time.  This is
+    configs/kwikstik-k40/src/k40_lcd.c.  Don't waste your time.  This is
       just a stub.
 
   Nokia LCD Drivers:
 
-    configs/olimex-lpc1766stk/src/up_lcd.c.  This examples is the
+    configs/olimex-lpc1766stk/src/lpc17_lcd.c.  This examples is the
       bottom half for the driver at drivers/lcd/nokia6100.c.
-      This was never completedly debugged ... there are probably issues
+      This was never completely debugged ... there are probably issues
       with that nasty 9-bit SPI interfaces.
 
   HX8346:
 
-    configs/sam3u-ek/src/up_lcd.c.  The SAM3U-EK developement board features
+    configs/sam3u-ek/src/sam_lcd.c.  The SAM3U-EK development board features
       a TFT/Transmissive color LCD module with touch-screen, FTM280C12D,
       with integrated driver IC HX8346.
 
   HX8347:
 
-    configs/pic32mx7mmb/src/up_mio283qt2.c.  This driver is for the MI0283QT-2
+    configs/pic32mx7mmb/src/pic32_mio283qt2.c.  This driver is for the MI0283QT-2
       LCD from Multi-Inno Technology Co., Ltd. This LCD is based on the Himax
       HX8347-D LCD controller.
 
   ILI93xx and Similar:
 
-    configs/stm3210e-eval/src/up_lcd.c. This driver supports the following
+    configs/stm3210e-eval/src/stm32_lcd.c. This driver supports the following
       LCDs:
 
       1. Ampire AM-240320LTNQW00H
       2. Orise Tech SPFD5408B
       3. RenesasSP R61580
 
-    configs/stm3220g-eval/src/up_lcd.c and configs/stm3240g-eval/src/up_lcd.c.
+    configs/stm3220g-eval/src/stm32_lcd.c and configs/stm3240g-eval/src/smt32_lcd.c.
       AM-240320L8TNQW00H (LCD_ILI9320 or LCD_ILI9321) and
       AM-240320D5TOQW01H (LCD_ILI9325)
 
-    configs/shenzhou/src/up_ili93xx.c. Another ILI93xx driver.
+    configs/shenzhou/src/stm32_ili93xx.c. Another ILI93xx driver.
     config/sam4e-ek/src/sam_ili9325.c. ILI9325 driver
     config/sam4e-ek/src/sam_ili9341.c. ILI9341 driver
 
+  ILI9488
+
+    configs/samv71-xult/src/sam_ili9488.c
+    include/nuttx/lcd/ili9488.h
+
   R61505U
 
-    configs/hymini-stm32v/src/up_r61505u.c
+    configs/hymini-stm32v/src/stm32_r61505u.c
 
   Sharp Memory LCD:
 
-    configs/maple/src/up_lcd.c
+    configs/maple/src/stm32_lcd.c
 
   OLEDs:
 
-    configs/stm32f4discovery/src/up_ug2864ambag01.c
-    configs/stm32f4discovery/src/up_ug2864hsweg01.c
-    configs/sam4l-xplained/src/up_ug2832hsweg04.c
-    configs/zp214xpa/src/up_ug2864ambag01.c
+    configs/stm32f4discovery/src/stm32_ug2864ambag01.c
+    configs/stm32f4discovery/src/stm32_ug2864hsweg01.c
+    configs/sam4l-xplained/src/sa,_ug2832hsweg04.c
+    configs/zp214xpa/src/lpc2148_ug2864ambag01.c
 
   LCD controllers built-into the MCU:
 
@@ -235,14 +240,14 @@ that makes then less re-usable:
 
   Alphnumeric/segment LCD Displays:
 
-    configs/skp16c26/src/up_lcd.c.  Untested alphanumeric LCD driver.
-    configs/pcblogic-pic32mx/src/up_lcd1602.c. LCD1602 is based on the
+    configs/skp16c26/src/m16c_lcd.c.  Untested alphanumeric LCD driver.
+    configs/pcblogic-pic32mx/src/pic32mx_lcd1602.c. LCD1602 is based on the
       Hitachi HD44780U LCD controller.  This version of the driver
       uses the PIC32MX PMP interface to control the LCD.  As of this
-      writing, has *NOT* been verfied (mostly because I get bewildered
+      writing, has *NOT* been verified (mostly because I get bewildered
       by all of the jumper wires).  See include/nuttx/lcd/hd4478ou.h
       for more information about LCD1602.
-    configs/sure-pic32mx/src/up_lcd1602.c. Another LCD1602 segment
+    configs/sure-pic32mx/src/pic32_lcd1602.c. Another LCD1602 segment
       LCD.  This is a bit-bang version of the driver and appears to
       be fully functional.  This version of the LCD1602 driver has
       been verified and is working fine.
@@ -259,4 +264,3 @@ graphics/
 =========
 
   See also the usage of the LCD driver in the graphics/ directory.
-
diff --git a/nuttx/include/nuttx/lcd/ili9488.h b/nuttx/include/nuttx/lcd/ili9488.h
new file mode 100644
index 000000000..f769cd39d
--- /dev/null
+++ b/nuttx/include/nuttx/lcd/ili9488.h
@@ -0,0 +1,137 @@
+/****************************************************************************

+ * include/nuttx/lcd/ili9488.h

+ *

+ *   Copyright (c) 2011, Atmel Corporation

+ *   All rights reserved.

+ *

+ * Redistribution and use in source and binary forms, with or without

+ * modification, are permitted provided that the following conditions are

+ * met:

+ *

+ *   - Redistributions of source code must retain the above copyright notice,

+ *     this list of conditions and the disclaimer below.

+ *

+ *   - Atmel's name may not be used to endorse or promote products derived

+ *     from this software without specific prior written permission.

+ *

+ * DISCLAIMER: THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR

+ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF

+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE

+ * DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT,

+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT

+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,

+ * OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF

+ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING

+ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,

+ * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

+ *

+ ****************************************************************************/

+

+#ifndef __INCLUDE_NUTTX_LCD_ILI9488_H

+#define __INCLUDE_NUTTX_LCD_ILI9488_H

+

+/****************************************************************************

+ * Pre-processor Definitions

+ ****************************************************************************/

+

+/* Level 1 Commands (from the display Datasheet) */

+

+#define ILI9488_CMD_NOP                             0x00

+#define ILI9488_CMD_SOFTWARE_RESET                  0x01

+#define ILI9488_CMD_READ_DISP_ID                    0x04

+#define ILI9488_CMD_READ_ERROR_DSI                  0x05

+#define ILI9488_CMD_READ_DISP_STATUS                0x09

+#define ILI9488_CMD_READ_DISP_POWER_MODE            0x0a

+#define ILI9488_CMD_READ_DISP_MADCTRL               0x0b

+#define ILI9488_CMD_READ_DISP_PIXEL_FORMAT          0x0c

+#define ILI9488_CMD_READ_DISP_IMAGE_MODE            0x0d

+#define ILI9488_CMD_READ_DISP_SIGNAL_MODE           0x0e

+#define ILI9488_CMD_READ_DISP_SELF_DIAGNOSTIC       0x0f

+#define ILI9488_CMD_ENTER_SLEEP_MODE                0x10

+#define ILI9488_CMD_SLEEP_OUT                       0x11

+#define ILI9488_CMD_PARTIAL_MODE_ON                 0x12

+#define ILI9488_CMD_NORMAL_DISP_MODE_ON             0x13

+#define ILI9488_CMD_DISP_INVERSION_OFF              0x20

+#define ILI9488_CMD_DISP_INVERSION_ON               0x21

+#define ILI9488_CMD_PIXEL_OFF                       0x22

+#define ILI9488_CMD_PIXEL_ON                        0x23

+#define ILI9488_CMD_DISPLAY_OFF                     0x28

+#define ILI9488_CMD_DISPLAY_ON                      0x29

+#define ILI9488_CMD_COLUMN_ADDRESS_SET              0x2a

+#define ILI9488_CMD_PAGE_ADDRESS_SET                0x2b

+#define ILI9488_CMD_MEMORY_WRITE                    0x2c

+#define ILI9488_CMD_MEMORY_READ                     0x2e

+#define ILI9488_CMD_PARTIAL_AREA                    0x30

+#define ILI9488_CMD_VERT_SCROLL_DEFINITION          0x33

+#define ILI9488_CMD_TEARING_EFFECT_LINE_OFF         0x34

+#define ILI9488_CMD_TEARING_EFFECT_LINE_ON          0x35

+#define ILI9488_CMD_MEMORY_ACCESS_CONTROL           0x36

+#define ILI9488_CMD_VERT_SCROLL_START_ADDRESS       0x37

+#define ILI9488_CMD_IDLE_MODE_OFF                   0x38

+#define ILI9488_CMD_IDLE_MODE_ON                    0x39

+#define ILI9488_CMD_COLMOD_PIXEL_FORMAT_SET         0x3a

+#define ILI9488_CMD_WRITE_MEMORY_CONTINUE           0x3c

+#define ILI9488_CMD_READ_MEMORY_CONTINUE            0x3e

+#define ILI9488_CMD_SET_TEAR_SCANLINE               0x44

+#define ILI9488_CMD_GET_SCANLINE                    0x45

+#define ILI9488_CMD_WRITE_DISPLAY_BRIGHTNESS        0x51

+#define ILI9488_CMD_READ_DISPLAY_BRIGHTNESS         0x52

+#define ILI9488_CMD_WRITE_CTRL_DISPLAY              0x53

+#define ILI9488_CMD_READ_CTRL_DISPLAY               0x54

+#define ILI9488_CMD_WRITE_CONTENT_ADAPT_BRIGHTNESS  0x55

+#define ILI9488_CMD_READ_CONTENT_ADAPT_BRIGHTNESS   0x56

+#define ILI9488_CMD_WRITE_MIN_CAB_LEVEL             0x5e

+#define ILI9488_CMD_READ_MIN_CAB_LEVEL              0x5f

+#define ILI9488_CMD_READ_ABC_SELF_DIAG_RES          0x68

+#define ILI9488_CMD_READ_ID1                        0xda

+#define ILI9488_CMD_READ_ID2                        0xdb

+#define ILI9488_CMD_READ_ID3                        0xdc

+

+/* Level 2 Commands (from the display Datasheet) */

+

+#define ILI9488_CMD_INTERFACE_MODE_CONTROL          0xb0

+#define ILI9488_CMD_FRAME_RATE_CONTROL_NORMAL       0xb1

+#define ILI9488_CMD_FRAME_RATE_CONTROL_IDLE_8COLOR  0xb2

+#define ILI9488_CMD_FRAME_RATE_CONTROL_PARTIAL      0xb3

+#define ILI9488_CMD_DISPLAY_INVERSION_CONTROL       0xb4

+#define ILI9488_CMD_BLANKING_PORCH_CONTROL          0xb5

+#define ILI9488_CMD_DISPLAY_FUNCTION_CONTROL        0xb6

+#define ILI9488_CMD_ENTRY_MODE_SET                  0xb7

+#define ILI9488_CMD_BACKLIGHT_CONTROL_1             0xb9

+#define ILI9488_CMD_BACKLIGHT_CONTROL_2             0xba

+#define ILI9488_CMD_HS_LANES_CONTROL                0xbe

+#define ILI9488_CMD_POWER_CONTROL_1                 0xc0

+#define ILI9488_CMD_POWER_CONTROL_2                 0xc1

+#define ILI9488_CMD_POWER_CONTROL_NORMAL_3          0xc2

+#define ILI9488_CMD_POWER_CONTROL_IDEL_4            0xc3

+#define ILI9488_CMD_POWER_CONTROL_PARTIAL_5         0xc4

+#define ILI9488_CMD_VCOM_CONTROL_1                  0xc5

+#define ILI9488_CMD_CABC_CONTROL_1                  0xc6

+#define ILI9488_CMD_CABC_CONTROL_2                  0xc8

+#define ILI9488_CMD_CABC_CONTROL_3                  0xc9

+#define ILI9488_CMD_CABC_CONTROL_4                  0xca

+#define ILI9488_CMD_CABC_CONTROL_5                  0xcb

+#define ILI9488_CMD_CABC_CONTROL_6                  0xcc

+#define ILI9488_CMD_CABC_CONTROL_7                  0xcd

+#define ILI9488_CMD_CABC_CONTROL_8                  0xce

+#define ILI9488_CMD_CABC_CONTROL_9                  0xcf

+#define ILI9488_CMD_NVMEM_WRITE                     0xd0

+#define ILI9488_CMD_NVMEM_PROTECTION_KEY            0xd1

+#define ILI9488_CMD_NVMEM_STATUS_READ               0xd2

+#define ILI9488_CMD_READ_ID4                        0xd3

+#define ILI9488_CMD_ADJUST_CONTROL_1                0xd7

+#define ILI9488_CMD_READ_ID_VERSION                 0xd8

+#define ILI9488_CMD_POSITIVE_GAMMA_CORRECTION       0xe0

+#define ILI9488_CMD_NEGATIVE_GAMMA_CORRECTION       0xe1

+#define ILI9488_CMD_DIGITAL_GAMMA_CONTROL_1         0xe2

+#define ILI9488_CMD_DIGITAL_GAMMA_CONTROL_2         0xe3

+#define ILI9488_CMD_SET_IMAGE_FUNCTION              0xe9

+#define ILI9488_CMD_ADJUST_CONTROL_2                0xf2

+#define ILI9488_CMD_ADJUST_CONTROL_3                0xf7

+#define ILI9488_CMD_ADJUST_CONTROL_4                0xf8

+#define ILI9488_CMD_ADJUST_CONTROL_5                0xf9

+#define ILI9488_CMD_SPI_READ_SETTINGS               0xfb

+#define ILI9488_CMD_ADJUST_CONTROL_6                0xfc

+#define ILI9488_CMD_ADJUST_CONTROL_7                0xff

+

+#endif /* __INCLUDE_NUTTX_LCD_ILI9488_H */