diff options
Diffstat (limited to 'nuttx/configs/olimex-strp711/scripts/oocd_ft2xx.cfg')
-rwxr-xr-x | nuttx/configs/olimex-strp711/scripts/oocd_ft2xx.cfg | 74 |
1 files changed, 37 insertions, 37 deletions
diff --git a/nuttx/configs/olimex-strp711/scripts/oocd_ft2xx.cfg b/nuttx/configs/olimex-strp711/scripts/oocd_ft2xx.cfg index a5c027bff..395da86b8 100755 --- a/nuttx/configs/olimex-strp711/scripts/oocd_ft2xx.cfg +++ b/nuttx/configs/olimex-strp711/scripts/oocd_ft2xx.cfg @@ -1,37 +1,37 @@ -#daemon configuration
-telnet_port 4444
-gdb_port 3333
-
-#interface
-interface ft2232
-ft2232_device_desc "Olimex OpenOCD JTAG A"
-ft2232_layout "olimex-jtag"
-ft2232_vid_pid 0x15BA 0x0003
-jtag_speed 0
-
-#use combined on interfaces or targets that can't set TRST/SRST separately
-reset_config trst_and_srst srst_pulls_trst
-
-#jtag scan chain
-#format L IRC IRCM IDCODE (Length, IR Capture, IR Capture Mask, IDCODE)
-jtag_device 4 0x1 0xf 0xe
-
-#target configuration
-daemon_startup reset
-
-#target <type> <startup mode>
-#target arm7tdmi <reset mode> <chainpos> <endianness> <variant>
-target arm7tdmi little run_and_halt 0 arm7tdmi
-run_and_halt_time 0 30
-
-working_area 0 0x2000C000 0x4000 nobackup
-
-#flash bank <driver> <base> <size> <chip_width> <bus_width>
-flash bank str7x 0x40000000 0x00040000 0 0 0 STR71x
-#flash bank cfi 0x60000000 0x00400000 2 2 0
-
-#Script used for FLASH programming
-#target_script 0 reset str71x_flashprogram.ocd
-
-# For more information about the configuration files, take a look at:
-# http://openfacts.berlios.de/index-en.phtml?title=Open+On-Chip+Debugger
+#daemon configuration +telnet_port 4444 +gdb_port 3333 + +#interface +interface ft2232 +ft2232_device_desc "Olimex OpenOCD JTAG A" +ft2232_layout "olimex-jtag" +ft2232_vid_pid 0x15BA 0x0003 +jtag_speed 0 + +#use combined on interfaces or targets that can't set TRST/SRST separately +reset_config trst_and_srst srst_pulls_trst + +#jtag scan chain +#format L IRC IRCM IDCODE (Length, IR Capture, IR Capture Mask, IDCODE) +jtag_device 4 0x1 0xf 0xe + +#target configuration +daemon_startup reset + +#target <type> <startup mode> +#target arm7tdmi <reset mode> <chainpos> <endianness> <variant> +target arm7tdmi little run_and_halt 0 arm7tdmi +run_and_halt_time 0 30 + +working_area 0 0x2000C000 0x4000 nobackup + +#flash bank <driver> <base> <size> <chip_width> <bus_width> +flash bank str7x 0x40000000 0x00040000 0 0 0 STR71x +#flash bank cfi 0x60000000 0x00400000 2 2 0 + +#Script used for FLASH programming +#target_script 0 reset str71x_flashprogram.ocd + +# For more information about the configuration files, take a look at: +# http://openfacts.berlios.de/index-en.phtml?title=Open+On-Chip+Debugger |