diff options
Diffstat (limited to 'nuttx/configs/samv71-xult/include/board.h')
| -rw-r--r-- | nuttx/configs/samv71-xult/include/board.h | 26 |
1 files changed, 13 insertions, 13 deletions
diff --git a/nuttx/configs/samv71-xult/include/board.h b/nuttx/configs/samv71-xult/include/board.h index 2a9b6b281..2f07bdbec 100644 --- a/nuttx/configs/samv71-xult/include/board.h +++ b/nuttx/configs/samv71-xult/include/board.h @@ -425,7 +425,7 @@ /* maXTouch Xplained Pro Xplained Pro LCD Connector ********************************* * - * Only the RGB is supported by this BSP (via SMC/EBI). The switch mode + * Only the parallel is supported by this BSP (via SMC/EBI). The switch mode * selector on the back of the maXtouch should be set in the OFF-ON-OFF * positions to select 16-bit color mode. * @@ -465,20 +465,20 @@ * 30 N/C - - * 31 N/C - - * 32 GND - GND Ground - * 33 PCLK/ PC30 GPIO RGB: Pixel clock Display RAM select. - * CMD_DATA_SEL MCU: One address line of the MCU for displays where + * 33 PCLK/ PC30 GPIO SMC: Pixel clock Display RAM select. + * CMD_DATA_SEL SPI: One address line of the MCU for displays where * it is possible to select either the register * or the data interface - * 34 VSYNC/CS PD19 NCS3 RGB: Vertical synchronization. - * MCU: Chip select - * 35 HSYNC/WE PC8 NWE RGB: Horizontal synchronization - * MCU: Write enable signal - * 36 DATA ENABLE/ PC11 NRD RGB: Data enable signal - * RE MCU: Read enable signal - * 37 SPI SCK - - MCU: Clock for SPI - * 38 SPI MOSI - - MCU: Master out slave in line of SPI - * 39 SPI MISO - - MCU: Master in slave out line of SPI - * 40 SPI SS - - MCU: Slave select for SPI + * 34 VSYNC/CS PD19 NCS3 SMC: Vertical synchronization. + * SPI: Chip select + * 35 HSYNC/WE PC8 NWE SMC: Horizontal synchronization + * SPI: Write enable signal + * 36 DATA ENABLE/ PC11 NRD SMC: Data enable signal + * RE SPI: Read enable signal + * 37 SPI SCK - - SPI: Clock for SPI + * 38 SPI MOSI - - SPI: Master out slave in line of SPI + * 39 SPI MISO - - SPI: Master in slave out line of SPI + * 40 SPI SS - - SPI: Slave select for SPI * 41 N/C - - * 42 TWI SDA PA3 TWD0 I2C data line (maXTouch®) * 43 TWI SCL PA4 TWCK0 I2C clock line (maXTouch) |