1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
|
/****************************************************************************
* configs/ubw32/include/board.h
* include/arch/board/board.h
*
* Copyright (C) 2012 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <gnutt@nuttx.org>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
****************************************************************************/
#ifndef __CONFIGS_UBW32_INCLUDE_BOARD_H
#define __CONFIGS_UBW32_INCLUDE_BOARD_H
/****************************************************************************
* Included Files
****************************************************************************/
#include <nuttx/config.h>
/****************************************************************************
* Pre-Processor Definitions
****************************************************************************/
/* Configuration ************************************************************/
/* Clocking *****************************************************************/
/* Crystal frequencies */
#define BOARD_POSC_FREQ 8000000 /* Primary OSC XTAL frequency (8MHz) */
#define BOARD_SOSC_FREQ 32768 /* Secondary OSC XTAL frequency (32.768KHz)
* (Not present on my board) */
/* Oscillator modes */
#define BOARD_FNOSC_POSCPLL 1 /* Use primary oscillator w/PLL */
#define BOARD_POSC_HSMODE 1 /* High-speed crystal (HS) mode */
/* PLL configuration and resulting CPU clock.
* CPU_CLOCK = ((POSC_FREQ / IDIV) * MULT) / ODIV
*/
#define BOARD_PLL_INPUT BOARD_POSC_FREQ
#define BOARD_PLL_IDIV 2 /* PLL input divider */
#define BOARD_PLL_MULT 20 /* PLL multiplier */
#define BOARD_PLL_ODIV 1 /* PLL output divider */
#define BOARD_CPU_CLOCK 80000000 /* CPU clock (80MHz = 8MHz * 20 / 2) */
/* USB PLL configuration.
* USB_CLOCK = ((POSC_XTAL / IDIV) * 24) / 2
*/
#define BOARD_UPLL_IDIV 2 /* USB PLL divider (revisit) */
#define BOARD_USB_CLOCK 48000000 /* USB clock (8MHz / 2) * 24 / 2) */
/* Peripheral clock is divided down from CPU clock.
* PBCLOCK = CPU_CLOCK / PBDIV
*/
#define BOARD_PBDIV 2 /* Peripheral clock divisor (PBDIV) */
#define BOARD_PBCLOCK 40000000 /* Peripheral clock (PBCLK = 80MHz/2) */
/* Watchdog pre-scaler (re-visit) */
#define BOARD_WD_ENABLE 0 /* Watchdog is disabled */
#define BOARD_WD_PRESCALER 8 /* Watchdog pre-scaler */
/* LED definitions **********************************************************/
/* ----- ----- -------------------------------------------------------------
* LABEL COLOR CONTROL
* ----- ----- -------------------------------------------------------------
* USB Green RF3. This could be used by software if USB is not used.
* Otherwise, RF3 is used as the USBID signal.
* LED1 While RE2, Pulled up. Low value illuminates
* LED2 Red RE1, Pulled up. Low value illuminates
* LED3 Yellow RE0, Pulled up. Low value illuminates
* PWR Blue Illuminated when 5V is present, not controlled by software
*/
/* LED index values for use with pic32mx_setled() */
#define PIC32MX_UBW32_LED1 0
#define PIC32MX_UBW32_LED2 1
#define PIC32MX_UBW32_LED3 2
#define PIC32MX_UBW32_NLEDS 3
/* LED bits for use with pic32mx_setleds() */
#define PIC32MX_UBW32_LED1_BIT (1 << PIC32MX_UBW32_LED1)
#define PIC32MX_UBW32_LED2_BIT (1 << PIC32MX_UBW32_LED2)
#define PIC32MX_UBW32_LED3_BIT (1 << PIC32MX_UBW32_LED3)
/* If CONFIG_ARCH_LEDS is defined, then NuttX will control these LEDs as follows:
*
* ON OFF
* ------------------------- ---- ---- ---- ---- ---- ----
* LED1 LED2 LED3 LED1 LED2 LED3
* ------------------------- ---- ---- ---- ---- ---- ----
* LED_STARTED 0 OFF OFF OFF --- --- ---
* LED_HEAPALLOCATE 1 ON OFF N/C --- --- ---
* LED_IRQSENABLED 2 OFF ON N/C --- --- ---
* LED_STACKCREATED 3 ON ON N/C --- --- ---
* LED_INIRQ 4 N/C N/C ON N/C N/C OFF
* LED_SIGNAL 4 N/C N/C ON N/C N/C OFF
* LED_ASSERTION 4 N/C N/C ON N/C N/C OFF
* LED_PANIC 5 ON N/C N/C OFF N/C N/C
*/
#define LED_STARTED 0
#define LED_HEAPALLOCATE 1
#define LED_IRQSENABLED 2
#define LED_STACKCREATED 3
#define LED_INIRQ 4
#define LED_SIGNAL 4
#define LED_ASSERTION 4
#define LED_PANIC 5
#define LED_NVALUES 6
/* The UBW32 board has three buttons.
*
* PROGRAM RE7 Pulled high, Grounded/low when depressed
* USER RE6 Pulled high, Grounded/low when depressed
* RESET Not software accessible
*/
#define BUTTON_PROGRAM 0
#define BUTTON_USER 1
#define NUM_BUTTONS 2
#define BUTTON_PROGRAM_BIT (1 << BUTTON_PROGRAM)
#define BUTTON_USER_BIT (1 << BUTTON_USER)
/****************************************************************************
* Public Types
****************************************************************************/
#ifndef __ASSEMBLY__
/****************************************************************************
* Inline Functions
****************************************************************************/
/****************************************************************************
* Public Function Prototypes
****************************************************************************/
#ifdef __cplusplus
#define EXTERN extern "C"
extern "C" {
#else
#define EXTERN extern
#endif
/****************************************************************************
* Name: pic32mx_ledinit and pic32mx_setled
*
* Description:
* If CONFIG_ARCH_LEDS is defined, then NuttX will control the on-board
* LEDs. If CONFIG_ARCH_LEDS is not defined, then the following interfaces
* are available to control the LEDs from user applicaitons.
*
****************************************************************************/
#ifndef CONFIG_ARCH_LEDS
EXTERN void pic32mx_ledinit(void);
#endif
#ifndef CONFIG_ARCH_LEDS
EXTERN void pic32mx_setled(int led, bool ledon);
#endif
#ifndef CONFIG_ARCH_LEDS
EXTERN void pic32mx_setleds(uint8_t ledset);
#endif
#undef EXTERN
#ifdef __cplusplus
}
#endif
#endif /* __ASSEMBLY__ */
#endif /* __CONFIGS_UBW32_INCLUDE_BOARD_H */
|
