diff options
Diffstat (limited to 'apps/nshlib/nsh_usbdev.c')
-rw-r--r-- | apps/nshlib/nsh_usbdev.c | 395 |
1 files changed, 0 insertions, 395 deletions
diff --git a/apps/nshlib/nsh_usbdev.c b/apps/nshlib/nsh_usbdev.c deleted file mode 100644 index ec80df481..000000000 --- a/apps/nshlib/nsh_usbdev.c +++ /dev/null @@ -1,395 +0,0 @@ -/**************************************************************************** - * apps/nshlib/nsh_usbdev.c - * - * Copyright (C) 2012-2013 Gregory Nutt. All rights reserved. - * Author: Gregory Nutt <gnutt@nuttx.org> - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * 3. Neither the name NuttX nor the names of its contributors may be - * used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS - * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE - * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, - * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS - * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED - * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN - * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE - * POSSIBILITY OF SUCH DAMAGE. - * - ****************************************************************************/ - -/**************************************************************************** - * Included Files - ****************************************************************************/ - -#include <nuttx/config.h> - -#include <stdio.h> -#include <stdlib.h> -#include <unistd.h> -#include <fcntl.h> -#include <assert.h> -#include <debug.h> - -#ifdef CONFIG_CDCACM -# include <nuttx/usb/cdcacm.h> -#endif - -#ifdef CONFIG_CDCACM -# include <nuttx/usb/pl2303.h> -#endif - -#include "nsh.h" -#include "nsh_console.h" - -/**************************************************************************** - * Pre-processor Definitions - ****************************************************************************/ -/* Output USB trace data to the console device using printf() unless (1) - * debug is enabled, then we want to keep the trace output in sync with the - * debug output by using syslog()we are using a USB console. In that case, - * we don't want the trace output on the USB console; let's try sending it - * a SYSLOG device (hopefully one is set up!) - */ - -#if defined(CONFIG_DEBUG) || defined(HAVE_USB_CONSOLE) -# define trmessage syslog -#else -# define trmessage printf -#endif - -/**************************************************************************** - * Private Types - ****************************************************************************/ - -/**************************************************************************** - * Private Function Prototypes - ****************************************************************************/ - -/**************************************************************************** - * Private Data - ****************************************************************************/ - -/**************************************************************************** - * Public Data - ****************************************************************************/ - -/**************************************************************************** - * Private Functions - ****************************************************************************/ - -/**************************************************************************** - * Name: nsh_tracecallback - ****************************************************************************/ - -/**************************************************************************** - * Name: nsh_tracecallback - * - * Description: - * This is part of the USB trace logic - * - ****************************************************************************/ - -#ifdef CONFIG_NSH_USBDEV_TRACE -static int nsh_tracecallback(struct usbtrace_s *trace, void *arg) -{ - usbtrace_trprintf((trprintf_t)trmessage, trace->event, trace->value); - return 0; -} -#endif - -/**************************************************************************** - * Name: nsh_configstdio - * - * Description: - * Configure standard I/O - * - ****************************************************************************/ - -#ifdef HAVE_USB_CONSOLE -static void nsh_configstdio(int fd) -{ - /* Make sure the stdin, stdout, and stderr are closed */ - - (void)fclose(stdin); - (void)fclose(stdout); - (void)fclose(stderr); - - /* Dup the fd to create standard fd 0-2 */ - - (void)dup2(fd, 0); - (void)dup2(fd, 1); - (void)dup2(fd, 2); - - /* fdopen to get the stdin, stdout and stderr streams. The following logic depends - * on the fact that the library layer will allocate FILEs in order. And since - * we closed stdin, stdout, and stderr above, that is what we should get. - * - * fd = 0 is stdin (read-only) - * fd = 1 is stdout (write-only, append) - * fd = 2 is stderr (write-only, append) - */ - - (void)fdopen(0, "r"); - (void)fdopen(1, "a"); - (void)fdopen(2, "a"); -} -#endif - -/**************************************************************************** - * Name: nsh_nullstdio - * - * Description: - * Use /dev/null for standard I/O - * - ****************************************************************************/ - -#ifdef HAVE_USB_CONSOLE -static int nsh_nullstdio(void) -{ - int fd; - - /* Open /dev/null for read/write access */ - - fd = open("/dev/null", O_RDWR); - if (fd >= 0) - { - /* Configure standard I/O to use /dev/null */ - - nsh_configstdio(fd); - - /* We can close the original file descriptor now (unless it was one of - * 0-2) - */ - - if (fd > 2) - { - close(fd); - } - - return OK; - } - - return fd; -} -#endif - -/**************************************************************************** - * Name: nsh_waitusbready - * - * Description: - * Wait for the USB console device to be ready - * - ****************************************************************************/ - -#ifdef HAVE_USB_CONSOLE -static int nsh_waitusbready(void) -{ - char inch; - ssize_t nbytes; - int nlc; - int fd; - - /* Don't start the NSH console until the console device is ready. Chances - * are, we get here with no functional console. The USB console will not - * be available until the device is connected to the host and until the - * host-side application opens the connection. - */ - - /* Open the USB serial device for read/write access */ - - do - { - /* Try to open the console */ - - fd = open(CONFIG_NSH_USBCONDEV, O_RDWR); - if (fd < 0) - { - /* ENOTCONN means that the USB device is not yet connected. Anything - * else is bad. - */ - - DEBUGASSERT(errno == ENOTCONN); - - /* Sleep a bit and try again */ - - sleep(2); - } - } - while (fd < 0); - - /* Now wait until we successfully read a carriage return a few times. - * That is a sure way of know that there is something at the other end of - * the USB serial connection that is ready to talk with us. The user needs - * to hit ENTER a few times to get things started. - */ - - nlc = 0; - do - { - /* Read one byte */ - - inch = 0; - nbytes = read(fd, &inch, 1); - - /* Is it a carriage return (or maybe a newline)? */ - - if (nbytes == 1 && (inch == '\n' || inch == '\r')) - { - /* Yes.. increment the count */ - - nlc++; - } - else - { - /* No.. Reset the count. We need to see 3 in a row to continue. */ - - nlc = 0; - } - } - while (nlc < 3); - - /* Configure standard I/O */ - - nsh_configstdio(fd); - - /* We can close the original file descriptor now (unless it was one of 0-2) */ - - if (fd > 2) - { - close(fd); - } - - return OK; -} -#endif - -/**************************************************************************** - * Public Functions - ****************************************************************************/ - -/**************************************************************************** - * Name: nsh_consolemain (USB console version) - * - * Description: - * This interfaces maybe to called or started with task_start to start a - * single an NSH instance that operates on stdin and stdout. This - * function does not return. - * - * This function handles generic /dev/console character devices, or - * special USB console devices. The USB console requires some special - * operations to handle the cases where the session is lost when the - * USB device is unplugged and restarted when the USB device is plugged - * in again. - * - * Input Parameters: - * Standard task start-up arguments. These are not used. argc may be - * zero and argv may be NULL. - * - * Returned Values: - * This function does not return nor does it ever exit (unless the user - * executes the NSH exit command). - * - ****************************************************************************/ - -#ifdef HAVE_USB_CONSOLE -int nsh_consolemain(int argc, char *argv[]) -{ - FAR struct console_stdio_s *pstate = nsh_newconsole(); - int ret; - - DEBUGASSERT(pstate); - - /* Initialize any USB tracing options that were requested */ - -#ifdef CONFIG_NSH_USBDEV_TRACE - usbtrace_enable(TRACE_BITSET); -#endif - - /* Initialize the USB serial driver */ - -#if defined(CONFIG_PL2303) || defined(CONFIG_CDCACM) -#ifdef CONFIG_CDCACM - ret = cdcacm_initialize(CONFIG_NSH_USBDEV_MINOR, NULL); -#else - ret = usbdev_serialinitialize(CONFIG_NSH_USBDEV_MINOR); -#endif - - (void)ret; /* Eliminate warning if not used */ - DEBUGASSERT(ret == OK); -#endif - - /* Configure to use /dev/null if we do not have a valid console. */ - -#ifndef CONFIG_DEV_CONSOLE - (void)nsh_nullstdio(); -#endif - - /* Execute the one-time start-up script (output may go to /dev/null) */ - -#ifdef CONFIG_NSH_ROMFSETC - (void)nsh_initscript(&pstate->cn_vtbl); -#endif - - /* Now loop, executing creating a session for each USB connection */ - - for (;;) - { - /* Wait for the USB to be connected to the host and switch - * standard I/O to the USB serial device. - */ - - ret = nsh_waitusbready(); - - (void)ret; /* Eliminate warning if not used */ - DEBUGASSERT(ret == OK); - - /* Execute the session */ - - (void)nsh_session(pstate); - - /* Switch to /dev/null because we probably no longer have a - * valid console device. - */ - - (void)nsh_nullstdio(); - } -} -#endif - -/**************************************************************************** - * Name: nsh_usbtrace - * - * Description: - * The function is called from the nsh_session() to dump USB data to the - * SYSLOG device. - * - * Input Parameters: - * None - * - * Returned Values: - * None - * - ****************************************************************************/ - -#ifdef CONFIG_NSH_USBDEV_TRACE -void nsh_usbtrace(void) -{ - (void)usbtrace_enumerate(nsh_tracecallback, NULL); -} -#endif |