From ae75e8e30f141aef342c6ce14fbb81ebeb359dbf Mon Sep 17 00:00:00 2001 From: patacongo Date: Sat, 30 Apr 2011 20:06:23 +0000 Subject: Add basic write logic git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@3544 42af7a65-404d-4744-a932-0658087f49c3 --- nuttx/fs/nxffs/nxffs.h | 54 +++-- nuttx/fs/nxffs/nxffs_cache.c | 19 ++ nuttx/fs/nxffs/nxffs_open.c | 45 ++-- nuttx/fs/nxffs/nxffs_reformat.c | 5 +- nuttx/fs/nxffs/nxffs_util.c | 15 +- nuttx/fs/nxffs/nxffs_write.c | 459 ++++++++++++++++++++++++++++++++++++++-- 6 files changed, 550 insertions(+), 47 deletions(-) diff --git a/nuttx/fs/nxffs/nxffs.h b/nuttx/fs/nxffs/nxffs.h index 6221cbd56..d9c4f3c88 100644 --- a/nuttx/fs/nxffs/nxffs.h +++ b/nuttx/fs/nxffs/nxffs.h @@ -177,6 +177,16 @@ #define NXFFS_NERASED 128 +/* Quasi-standard definitions */ + +#ifndef MIN +# define MIN(a,b) (a < b ? a : b) +#endif + +#ifndef MAX +# define MAX(a,b) (a > b ? a : b) +#endif + /**************************************************************************** * Public Types ****************************************************************************/ @@ -211,10 +221,9 @@ struct nxffs_data_s { uint8_t magic[4]; /* 0-3: Magic number for valid data */ uint8_t crc[4]; /* 4-7: CRC32 */ - uint8_t datlen[4]; /* 8-11: Length of data in bytes */ - /* 12-: Variable length data follows */ + uint8_t datlen[2]; /* 8-9: Length of data in bytes */ }; -#define SIZEOF_NXFFS_DATA_HDR 12 +#define SIZEOF_NXFFS_DATA_HDR 10 /* This is an in-memory representation of the NXFFS inode as extracted from * FLASH and with additional state information. @@ -251,14 +260,12 @@ struct nxffs_wrfile_s struct nxffs_ofile_s ofile; /* The following fields are required to support the current write - * operation. Note that the size of the current block can be determined - * from (wroffset - dathdr - SIZEOF_NXFFS_DATA_HDR). Basic write - * operation: + * operation. * * 1. Inode header location determined (but not yet written). * 2. Block header location determined (but not yet written). * 3. Check FLASH memory to make sure that it is erased. - * 4. As data is written, wrlen is updated and the data is written to FLASH. + * 4. As data is written, datlen is updated and the data is written to FLASH. * 5. If the end of the FLASH block is encountered, the data block CRC is * calculated and the block header is also written to flash. * 6. When the file is closed, the final, partial data block is written to @@ -269,8 +276,9 @@ struct nxffs_wrfile_s */ bool truncate; /* Delete a file of the same name */ - uint16_t wrlen; /* Number of bytes written in data block */ - off_t dathdr; /* FLASH offset to the current data header */ + uint16_t datlen; /* Number of bytes written in data block */ + off_t doffset; /* FLASH offset to the current data header */ + uint32_t crc; /* Accumulated data block CRC */ }; /* This structure represents the overall state of on NXFFS instance. */ @@ -396,6 +404,8 @@ extern uint16_t nxffs_rdle16(FAR const uint8_t *val); * Returned Values: * None * + * Defined in nxffs_util.c + * ****************************************************************************/ extern void nxffs_wrle16(uint8_t *dest, uint16_t val); @@ -431,6 +441,8 @@ extern uint32_t nxffs_rdle32(FAR const uint8_t *val); * Returned Value: * None * + * Defined in nxffs_util.c + * ****************************************************************************/ extern void nxffs_wrle32(uint8_t *dest, uint32_t val); @@ -439,20 +451,20 @@ extern void nxffs_wrle32(uint8_t *dest, uint32_t val); * Name: nxffs_erased * * Description: - * Check if the block of memory if in the erased state. + * Check if a block of memory is in the erased state. * * Input Parameters: * buffer - Address of the start of the memory to check. * buflen - The number of bytes to check. * * Returned Values: - * true: memory is erased; false: memory is not erased + * The number of erased bytes found at the beginning of the memory region. * * Defined in nxffs_util.c * ****************************************************************************/ -extern bool nxffs_erased(FAR const uint8_t *buffer, size_t buflen); +extern size_t nxffs_erased(FAR const uint8_t *buffer, size_t buflen); /**************************************************************************** * Name: nxffs_rdcache @@ -517,6 +529,24 @@ extern int nxffs_wrcache(FAR struct nxffs_volume_s *volume, off_t block, extern void nxffs_ioseek(FAR struct nxffs_volume_s *volume, off_t offset); +/**************************************************************************** + * Name: nxffs_iotell + * + * Description: + * Report the current position. + * + * Input Parameters: + * volume - Describes the NXFFS volume + * + * Returned Value: + * The offset from the beginning of FLASH to the current seek position. + * + * Defined in nxffs_cache.c + * + ****************************************************************************/ + +extern off_t nxffs_iotell(FAR struct nxffs_volume_s *volume); + /**************************************************************************** * Name: nxffs_getc * diff --git a/nuttx/fs/nxffs/nxffs_cache.c b/nuttx/fs/nxffs/nxffs_cache.c index f149de7cb..41974bf93 100644 --- a/nuttx/fs/nxffs/nxffs_cache.c +++ b/nuttx/fs/nxffs/nxffs_cache.c @@ -166,6 +166,25 @@ void nxffs_ioseek(FAR struct nxffs_volume_s *volume, off_t offset) volume->iooffset = offset - volume->geo.blocksize * volume->ioblock; } +/**************************************************************************** + * Name: nxffs_iotell + * + * Description: + * Report the current position. + * + * Input Parameters: + * volume - Describes the NXFFS volume + * + * Returned Value: + * The offset from the beginning of FLASH to the current seek position. + * + ****************************************************************************/ + +off_t nxffs_iotell(FAR struct nxffs_volume_s *volume) +{ + return volume->ioblock * volume->geo.blocksize + volume->iooffset; +} + /**************************************************************************** * Name: nxffs_getc * diff --git a/nuttx/fs/nxffs/nxffs_open.c b/nuttx/fs/nxffs/nxffs_open.c index 424256dcf..9d435f760 100644 --- a/nuttx/fs/nxffs/nxffs_open.c +++ b/nuttx/fs/nxffs/nxffs_open.c @@ -64,11 +64,19 @@ ****************************************************************************/ /**************************************************************************** - * Public Variables + * Private Data ****************************************************************************/ +/* Since we are limited to a single file opened for writing, it makes sense + * to pre-allocate the write state structure. + */ + +#ifdef CONFIG_NXFSS_PREALLOCATED +static struct nxffs_wrfile_s g_wrfile; +#endif + /**************************************************************************** - * Private Variables + * Public Data ****************************************************************************/ /**************************************************************************** @@ -124,8 +132,7 @@ static inline int nxffs_hdrpos(FAR struct nxffs_volume_s *volume, { /* Save the offset to the FLASH region reserved for the inode header */ - wrfile->ofile.entry.hoffset = - volume->ioblock * volume->geo.blocksize + volume->iooffset; + wrfile->ofile.entry.hoffset = nxffs_iotell(volume); } return OK; } @@ -180,8 +187,7 @@ static inline int nxffs_nampos(FAR struct nxffs_volume_s *volume, { /* Save the offset to the FLASH region reserved for the inode name */ - wrfile->ofile.entry.noffset = - volume->ioblock * volume->geo.blocksize + volume->iooffset; + wrfile->ofile.entry.noffset = nxffs_iotell(volume); } return OK; } @@ -242,8 +248,7 @@ static inline int nxffs_hdrerased(FAR struct nxffs_volume_s *volume, { /* This is where we will put the header */ - wrfile->ofile.entry.hoffset = - volume->ioblock * volume->geo.blocksize + volume->iooffset; + wrfile->ofile.entry.hoffset = nxffs_iotell(volume); } return ret; } @@ -305,8 +310,7 @@ static inline int nxffs_namerased(FAR struct nxffs_volume_s *volume, { /* This is where we will put the name */ - wrfile->ofile.entry.hoffset = - volume->ioblock * volume->geo.blocksize + volume->iooffset; + wrfile->ofile.entry.hoffset = nxffs_iotell(volume); } return ret; } @@ -412,12 +416,17 @@ static inline int nxffs_wropen(FAR struct nxffs_volume_s *volume, * that includes additional information to support the write operation. */ +#ifdef CONFIG_NXFSS_PREALLOCATED + wrfile = &g_wrfile; + memset(wrfile, 0, sizeof(struct nxffs_wrfile_s)); +#else wrfile = (FAR struct nxffs_wrfile_s *)kzalloc(sizeof(struct nxffs_wrfile_s)); if (!wrfile) { ret = -ENOMEM; goto errout; } +#endif /* Initialize the open file state structure */ @@ -553,7 +562,9 @@ static inline int nxffs_wropen(FAR struct nxffs_volume_s *volume, return OK; errout_with_ofile: +#ifndef CONFIG_NXFSS_PREALLOCATED kfree(wrfile); +#endif errout: return ret; } @@ -672,10 +683,20 @@ static inline void nxffs_freeofile(FAR struct nxffs_volume_s *volume, volume->ofiles = ofile->flink; } - /* Then free the open file */ + /* Release the open file entry */ nxffs_freeentry(&ofile->entry); - kfree(ofile); + + /* Then free the open file container (unless this the pre-alloated + * write-only open file container) + */ + +#ifdef CONFIG_NXFSS_PREALLOCATED + if ((FAR struct nxffs_wrfile_s*)ofile != &g_wrfile) +#endif + { + kfree(ofile); + } } else { diff --git a/nuttx/fs/nxffs/nxffs_reformat.c b/nuttx/fs/nxffs/nxffs_reformat.c index df4261371..e2e46fd07 100644 --- a/nuttx/fs/nxffs/nxffs_reformat.c +++ b/nuttx/fs/nxffs/nxffs_reformat.c @@ -191,8 +191,9 @@ static int nxffs_badblocks(FAR struct nxffs_volume_s *volume) else { - good = nxffs_erased(&blkptr[SIZEOF_NXFFS_BLOCK_HDR], - volume->geo.blocksize - SIZEOF_NXFFS_BLOCK_HDR); + size_t blocksize = volume->geo.blocksize - SIZEOF_NXFFS_BLOCK_HDR; + size_t erasesize = nxffs_erased(&blkptr[SIZEOF_NXFFS_BLOCK_HDR], blocksize); + good = (blocksize == erasesize); } /* If the block is bad, attempt to re-write the block header indicating diff --git a/nuttx/fs/nxffs/nxffs_util.c b/nuttx/fs/nxffs/nxffs_util.c index 061276e81..ea2e97967 100644 --- a/nuttx/fs/nxffs/nxffs_util.c +++ b/nuttx/fs/nxffs/nxffs_util.c @@ -153,26 +153,29 @@ void nxffs_wrle32(uint8_t *dest, uint32_t val) * Name: nxffs_erased * * Description: - * Check if the block of memory if in the erased state. + * Check if a block of memory is in the erased state. * * Input Parameters: * buffer - Address of the start of the memory to check. * buflen - The number of bytes to check. * * Returned Values: - * true: memory is erased; false: memory is not erased + * The number of erased bytes found at the beginning of the memory region. * ****************************************************************************/ -bool nxffs_erased(FAR const uint8_t *buffer, size_t buflen) +size_t nxffs_erased(FAR const uint8_t *buffer, size_t buflen) { - for (; buflen; buflen--) + size_t nerased = 0; + + for (; nerased < buflen; nerased++) { if (*buffer != CONFIG_NXFFS_ERASEDSTATE) { - return false; + break; } buffer++; } - return true; + + return nerased; } diff --git a/nuttx/fs/nxffs/nxffs_write.c b/nuttx/fs/nxffs/nxffs_write.c index f7afcd006..e56d2e0e3 100644 --- a/nuttx/fs/nxffs/nxffs_write.c +++ b/nuttx/fs/nxffs/nxffs_write.c @@ -43,6 +43,7 @@ #include #include +#include #include #include #include @@ -56,18 +57,373 @@ * Pre-processor Definitions ****************************************************************************/ +/* When we allocate FLASH for a new inode data block, we will require that + * space is available to hold this minimum number of data bytes in addition + * to the size of the data block headeer. + */ + +#define NXFFS_MINDATA 16 + /**************************************************************************** * Public Types ****************************************************************************/ + +/**************************************************************************** + * Private Data + ****************************************************************************/ /**************************************************************************** - * Public Variables + * Public Data ****************************************************************************/ /**************************************************************************** * Private Functions ****************************************************************************/ +/**************************************************************************** + * Name: nxffs_hdrpos + * + * Description: + * Find a valid location for the data block header. A valid location will + * have these properties: + * + * 1. It will lie in the free flash region. + * 2. It will have enough contiguous memory to hold the entire header + * PLUS some meaningful amount of data (NXFFS_MINDATA). + * 3. The memory at this location will be fully erased. + * + * This function will only perform the checks of 1) and 2). + * + * Input Parameters: + * volume - Describes the NXFFS volume + * wrfile - Contains the current guess for the header position. On + * successful return, this field will hold the selected header + * position. + * size - The minimum size of the current write. + * + * Returned Value: + * Zero is returned on success. Otherwise, a negated errno value is + * returned indicating the nature of the failure. Of special interest + * the return error of -ENOSPC which means that the FLASH volume is + * full and should be repacked. + * + * On successful return the following are also valid: + * + * wrfile->doffset - Flash offset to candidate header position + * volume->ioblock - Read/write block number of the block containing the + * header position + * volume->iooffset - The offset in the block to the candidate header + * position. + * volume->froffset - Updated offset to the first free FLASH block. + * + ****************************************************************************/ + +static inline int nxffs_hdrpos(FAR struct nxffs_volume_s *volume, + FAR struct nxffs_wrfile_s *wrfile, + size_t size) +{ + int ret; + + /* Reserve memory for the object */ + + ret = nxffs_wrreserve(volume, SIZEOF_NXFFS_DATA_HDR + size); + if (ret == OK) + { + /* Save the offset to the FLASH region reserved for the inode header */ + + wrfile->doffset = nxffs_iotell(volume); + } + return OK; +} + +/**************************************************************************** + * Name: nxffs_hdrerased + * + * Description: + * Find a valid location for the data block header. A valid location will + * have these properties: + * + * 1. It will lie in the free flash region. + * 2. It will have enough contiguous memory to hold the entire header + * PLUS some meaningful amount of data (NXFFS_MINDATA). + * 3. The memory at this location will be fully erased. + * + * This function will only perform the check 3). On entry it assumes: + * + * volume->ioblock - Read/write block number of the block containing the + * header position + * volume->iooffset - The offset in the block to the candidate header + * position. + * + * Input Parameters: + * volume - Describes the NXFFS volume + * wrfile - Contains the current guess for the header position. On + * successful return, this field will hold the selected header + * position. + * size - The minimum size of the current write. + * + * Returned Value: + * Zero is returned on success. Otherwise, a negated errno value is + * returned indicating the nature of the failure. Of special interest + * the return error of -ENOSPC which means that the FLASH volume is + * full and should be repacked. + * + * On successful return the following are also valid: + * + * wrfile->doffset - Flash offset to candidate header position + * volume->ioblock - Read/write block number of the block containing the + * header position + * volume->iooffset - The offset in the block to the candidate header + * position. + * volume->froffset - Updated offset to the first free FLASH block. + * + ****************************************************************************/ + +static inline int nxffs_hdrerased(FAR struct nxffs_volume_s *volume, + FAR struct nxffs_wrfile_s *wrfile, + size_t size) +{ + int ret; + + /* Find a valid location to save the inode header */ + + ret = nxffs_wrverify(volume, SIZEOF_NXFFS_DATA_HDR + size); + if (ret == OK) + { + /* This is where we will put the header */ + + wrfile->doffset = nxffs_iotell(volume); + } + return ret; +} + +/**************************************************************************** + * Name: nxffs_wralloc + * + * Description: + * Allocate FLASH memory for the data block. + * + * Input Parameters: + * volume - Describes the NXFFS volume + * wrfile - Describes the open file to be written. + * size - Size of the current write operation. + * + * Returned Value: + * Zero is returned on success. Otherwise, a negated errno value is + * returned indicating the nature of the failure. + * + ****************************************************************************/ + +static inline int nxffs_wralloc(FAR struct nxffs_volume_s *volume, + FAR struct nxffs_wrfile_s *wrfile, + size_t size) +{ + bool packed; + int ret; + + /* Allocate FLASH memory for the data block. + * + * Loop until the data block header is configured or until a failure + * occurs. Note that nothing is written to FLASH. The data block header + * is not written until either (1) the file is closed, or (2) the data + * region is fully populated. + */ + + packed = false; + for (;;) + { + size_t mindata = MIN(NXFFS_MINDATA, size); + + /* File a valid location to position the data block. Start with + * the first byte in the free FLASH region. + */ + + ret = nxffs_hdrpos(volume, wrfile, mindata); + if (ret == OK) + { + /* Find a region of memory in the block that is fully erased */ + + ret = nxffs_hdrerased(volume, wrfile, mindata); + if (ret == OK) + { + /* Valid memory for the data block was found. Return success. */ + + return OK; + } + } + + /* If no valid memory is found searching to the end of the volume, + * then -ENOSPC will be returned. Other errors are not handled. + */ + + if (ret != -ENOSPC || packed) + { + fdbg("Failed to find inode header memory: %d\n", -ret); + return -ENOSPC; + } + + /* -ENOSPC is a special case.. It means that the volume is full. + * Try to pack the volume in order to free up some space. + */ + + ret = nxffs_pack(volume); + if (ret < 0) + { + fdbg("Failed to pack the volume: %d\n", -ret); + return ret; + } + + /* After packing the volume, froffset will be updated to point to the + * new free flash region. Try again. + */ + + packed = true; + } + + /* Can't get here */ + + return OK; +} + +/**************************************************************************** + * Name: nxffs_reverify + * + * Description: + * Verify that the partial flash data block in the volume cache is valid. + * On entry, this function assumes: + * + * volume->ioblock - Read/write block number of the block containing the + * data block. + * volume->iooffset - The offset in the block to the data block. + * + * Input Parameters: + * volume - Describes the NXFFS volume + * wrfile - Describes the open file to be written. + * + * Returned Value: + * Zero is returned on success. Otherwise, a negated errno value is + * returned indicating the nature of the failure. + * + ****************************************************************************/ + +static inline int nxffs_reverify(FAR struct nxffs_volume_s *volume, + FAR struct nxffs_wrfile_s *wrfile) +{ + uint32_t crc; + off_t offset; + + if (wrfile->datlen > 0) + { + /* Get the offset to the start of the data */ + + offset = volume->iooffset + SIZEOF_NXFFS_DATA_HDR; + DEBUGASSERT(offset + wrfile->datlen < volume->geo.blocksize); + + /* Calculate the CRC of the partial data block */ + + crc = crc32(&volume->cache[offset], wrfile->datlen); + + /* It must match the previoulsy calculated CRC value */ + + if (crc != wrfile->crc) + { + fdbg("CRC failure\n"); + return -EIO; + } + } + return OK; +} + +/**************************************************************************** + * Name: nxffs_wrappend + * + * Description: + * Append FLASH data to the data block. + * + * Input Parameters: + * volume - Describes the NXFFS volume + * wrfile - Describes the open file to be written. + * buffer - Address of buffer of data to be written. + * buflen - The number of bytes remaimining to be written + * + * Returned Value: + * The number of bytes written is returned on success. Otherwise, a + * negated errno value is returned indicating the nature of the failure. + * + ****************************************************************************/ + +static inline ssize_t nxffs_wrappend(FAR struct nxffs_volume_s *volume, + FAR struct nxffs_wrfile_s *wrfile, + FAR const char *buffer, size_t buflen) +{ + ssize_t maxsize; + size_t nbytestowrite; + ssize_t nbytesleft; + off_t offset; + int ret; + + /* Get the offset to the start of unwritten data */ + + offset = volume->iooffset + wrfile->datlen + SIZEOF_NXFFS_DATA_HDR; + + /* Determine that maximum amount of data that can be written to this + * block. + */ + + maxsize = volume->geo.blocksize - offset; + DEBUGASSERT(maxsize > 0); + + /* But don't try to write over any unerased bytes */ + + maxsize = nxffs_erased(&volume->cache[offset], maxsize); + + /* Write as many bytes as we can into the data buffer */ + + nbytestowrite = MIN(maxsize, buflen); + nbytesleft = maxsize - nbytestowrite; + + if (nbytestowrite > 0) + { + /* Copy the data into the volume write cache */ + + memcpy(&volume->cache[offset], buffer, nbytestowrite); + + /* Re-calculate the CRC */ + + wrfile->crc = crc32(&volume->cache[offset], nbytestowrite); + + /* And write the partial write block to FLASH -- unless the data + * block is full. In that case, the block will be written below. + */ + + ret = nxffs_wrcache(volume, volume->ioblock, 1); + if (ret < 0) + { + fdbg("nxffs_wrcache failed: %d\n", -ret); + return ret; + } + } + + /* Calculate the number of bytes remaining in data block */ + + nbytesleft = maxsize - nbytestowrite; + if (nbytesleft <= 0) + { + /* The data block is full, write the block to FLASH */ + + ret = nxffs_wrblkhdr(volume, wrfile); + if (ret < 0) + { + fdbg("nxffs_wrblkdhr failed: %d\n", -ret); + return ret; + } + } + + /* Return the number of bytes written to FLASH this time */ + + return nbytestowrite; +} + /**************************************************************************** * Public Functions ****************************************************************************/ @@ -85,7 +441,8 @@ ssize_t nxffs_write(FAR struct file *filep, FAR const char *buffer, size_t bufle { FAR struct nxffs_volume_s *volume; FAR struct nxffs_wrfile_s *wrfile; - ssize_t ret; + ssize_t nbyteswritten; + int ret; fvdbg("Write %d bytes to offset %d\n", buflen, filep->f_pos); @@ -116,29 +473,62 @@ ssize_t nxffs_write(FAR struct file *filep, FAR const char *buffer, size_t bufle /* Check if the file was opened with write access */ -#ifdef CONFIG_DEBUG if ((wrfile->ofile.mode & O_WROK) == 0) { fdbg("File not open for write access\n"); ret = -EACCES; goto errout_with_semaphore; } -#endif - /* Seek to the current file offset */ + /* Loop until we successfully appended all of the data to the file (or an + * error occurs) + */ - nxffs_ioseek(volume, wrfile->dathdr + wrfile->wrlen); + while (buflen > 0) + { + /* Have we already allocated the data block? */ - /* Write data to that file offset */ + if (wrfile->doffset == 0) + { + /* No, allocate the data block now */ - ret = nxffs_wrdata(volume, (FAR const uint8_t*)buffer, buflen); - if (ret > 0) - { - /* Update the file offset */ + wrfile->datlen = 0; + ret = nxffs_wralloc(volume, wrfile, buflen); + if (ret < 0) + { + fdbg("Failed to allocate a data block: %d\n", -ret); + goto errout_with_semaphore; + } + } + + /* Seek to the FLASH block containing the data block */ + + nxffs_ioseek(volume, wrfile->doffset); - filep->f_pos += ret; + /* Verify that the FLASH data that was previously written is still intact */ + + ret = nxffs_reverify(volume, wrfile); + if (ret < 0) + { + fdbg("Failed to verify FLASH a data block: %d\n", -ret); + goto errout_with_semaphore; + } + + /* Append the data to the end of the data block and write the updated + * block to flash. + */ + + nbyteswritten = nxffs_wrappend(volume, wrfile, buffer, buflen); + if (nbyteswritten < 0) + { + fdbg("Failed to append to FLASH a data block: %d\n", -ret); + goto errout_with_semaphore; + } + + /* Decrement the number of bytes remaining to be written */ + + buflen -= nbyteswritten; } -#warning "Add check for block full" errout_with_semaphore: sem_post(&volume->exclsem); @@ -387,7 +777,46 @@ int nxffs_wrverify(FAR struct nxffs_volume_s *volume, size_t size) int nxffs_wrblkhdr(FAR struct nxffs_volume_s *volume, FAR struct nxffs_wrfile_s *wrfile) { -#warning "Missing logic" - return -ENOSYS; + FAR struct nxffs_data_s *dathdr; + int ret; + + /* Write the dat block header to memory */ + + nxffs_ioseek(volume, wrfile->doffset); + dathdr = (FAR struct nxffs_data_s *)&volume->cache[volume->iooffset]; + memcpy(dathdr->magic, g_datamagic, NXFFS_MAGICSIZE); + nxffs_wrle32(dathdr->crc, 0); + nxffs_wrle16(dathdr->datlen, wrfile->datlen); + + /* Update the entire data block CRC (including the header) */ + + wrfile->crc = crc32(&volume->cache[volume->iooffset], wrfile->datlen + SIZEOF_NXFFS_DATA_HDR); + nxffs_wrle32(dathdr->crc, wrfile->crc); + + /* And write the data block to FLASH */ + + ret = nxffs_wrcache(volume, volume->ioblock, 1); + if (ret < 0) + { + fdbg("nxffs_wrcache failed: %d\n", -ret); + goto errout; + } + + /* After the block has been successfully written to flash, update the inode + * statistics and reset the write state. + */ + + wrfile->ofile.entry.datlen += wrfile->datlen; + if (wrfile->ofile.entry.doffset) + { + wrfile->ofile.entry.doffset = wrfile->doffset; + } + ret = OK; + +errout: + wrfile->crc = 0; + wrfile->doffset = 0; + wrfile->datlen = 0; + return ret; } -- cgit v1.2.3