From be8373a51ca9d70debecae387df06b621890cbf7 Mon Sep 17 00:00:00 2001 From: patacongo Date: Sun, 11 Apr 2010 19:44:36 +0000 Subject: Prep for 5.3 release git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@2589 42af7a65-404d-4744-a932-0658087f49c3 --- nuttx/ChangeLog | 13 ++-- nuttx/Documentation/NuttX.html | 112 +++++++++++++++++++---------- nuttx/Documentation/README.html | 6 +- nuttx/README.txt | 4 ++ nuttx/ReleaseNotes | 21 ++++++ nuttx/configs/olimex-lpc2378/src/up_leds.c | 27 ++++--- 6 files changed, 126 insertions(+), 57 deletions(-) diff --git a/nuttx/ChangeLog b/nuttx/ChangeLog index b93a999c8..bcc923a2c 100644 --- a/nuttx/ChangeLog +++ b/nuttx/ChangeLog @@ -42,7 +42,7 @@ Can't do this; the caller must be able to wait for access to memory. * Fixed bugs associated with debug output: - Cannot do dbg() in middle of context switch logic. + Cannot do dbg() in middle of context switch logic. because it may require use of semaphores and cause additional context switches. lldbg() is safe. * Interrupt must be disabled throughout all context switches. @@ -51,8 +51,8 @@ serial.h defines the interface. * Fixed mq_receive() and mq_send() -- bad memcpy() * Fixed C5471 signal deliver logic: use of dbg() and - other actions by use signal handler can alter errno. - need to protect errno during signal handling. + other actions by use signal handler can alter errno. + need to protect errno during signal handling. * Fixed uninitialized variable in filesystem that could cause various problems * Added a test for roundrobin scheduler. @@ -1068,7 +1068,7 @@ * configs/ea3131/nsh - Added a NuttShell (NSH) configuration for the EA3131. -5.3 2010-xx-xx Gregory Nutt +5.3 2010-04-11 Gregory Nutt * arch/arm/src/lpc313x/lpc313x_usbdev.c - USB driver for the LPC313x contributed by David Hewson. @@ -1078,9 +1078,8 @@ * Several important compilation error fixes in lpc313x and (dualspeed) USB code also contributed by David Hewson. * arch/arm/src/sam3u/sam3u_dmac.c - DMA support for the AT90SAM3U. - (untested on initial checkin). * arch/arm/src/sam3u/sam3u_hsmci.c - SD memory card support for AT90SAM3U - (incomplete on initial checkin). + (Neither the DMA nor the HSMCI driver are functional on the initial checkin). * drivers/usbdev - Several important fixes to the USB mass storage driver submitted by David Hewson. * configs/olimex-lpc2378, arch/arm/include/lpc2378, and arch/arm/src/lpc2378 - @@ -1089,3 +1088,5 @@ * arch/arm/src/sam3u/sam3u_internal.h - Fixed a critical bug in the AT91SAM3U PIO decoding. No PIOs greater than 15 could be used on any port! Obviously, no one has been using this port. + +5.4 2010-xx-xx Gregory Nutt diff --git a/nuttx/Documentation/NuttX.html b/nuttx/Documentation/NuttX.html index 203ae6e88..8dd0eaa49 100644 --- a/nuttx/Documentation/NuttX.html +++ b/nuttx/Documentation/NuttX.html @@ -729,31 +729,37 @@ -

nuttx-5.2 Release Notes: +

nuttx-5.3 Release Notes:

- This 49th release of NuttX was made on March 18, 2010 and is available for download from the + This 50th release of NuttX was made on April 11, 2010 and is available for download from the SourceForge website. The change log associated with the release is available here. Unreleased changes after this release are available in CVS. These unreleased changes are listed here.

- This release completes the verification of the basic port for the NXP - LPC3131 MCU - on the Embedded Artists EA3131 board. - This basic port includes basic boot-up, serial console, and timer interrupts. This port - has been verified on the using the NuttX OS test and includes a working - implementation of the NuttShell (NSH). + This release suport for one new achitecture:

+
    +
  • A basic port for the NXP LPC2378 MCU on the Olimex-LPC2378 development board was contributed by Rommel Marcelo.
    • +

- An extended release will follow and should include SDIO-based SD card - support and device USB. + And extensions to two existing architures:

+
    +
  • David Hewson contributed a dual-speed (full/high) USB device-side driver + for the NXP LPC3131 on the Embedded Artists EA3131 development board.
    • +
  • A DMA driver and a high speed MCI driver for the Atmel AT91SAM3U are + included (but not fully tested in this release).
    • +

- A few additional features and bugfixes of a minor nature were also incorporated - as detailed in the ChangeLog. + Two important bugfix was also included:

+
    +
  • An important fix to the USB mass storage driver was contributed by David Hewson.
    • +
  • A serious error in the AT91SAM3U PIO handling was fixed.
    • +
@@ -845,6 +851,34 @@ + + + + + + + + @@ -1606,21 +1640,26 @@ Other memory:


+

+ NXP LPC2378. + Support is provided for the NXP LPC2378 MCU. In particular, + support is provided for the Olimex-LPC2378 development board. + This port was contributed by Rommel Marcelo is was first released in NuttX-5.3. + This port also used the GNU arm-elf toolchain* under Linux or Cygwin. +

+
    +

    + STATUS: + This port boots and passes the OS test (examples/ostest) and includes a + working includes a working implementation of the NuttShell ((NSH)). + The port is complete and verified. + As of NuttX 5.3, the port includes only basic timer interrupts and serial console support. +

    +

    + Development Environments: (Same as for the NXP LPC214x). +

    +
+


@@ -934,8 +968,8 @@
NXP LPC3131. - The basic port for the NXP LPC3131 on the Embedded Artists EA3131 - development board was released in NuttX-5.1 with a GNU arm-elf or arm-eabi toolchain* under Linux or Cygwin + The port for the NXP LPC3131 on the Embedded Artists EA3131 + development board was first released in NuttX-5.1 with a GNU arm-elf or arm-eabi toolchain* under Linux or Cygwin (but was not functional until NuttX-5.2).

    @@ -943,10 +977,10 @@ STATUS: The basic EA3131 port is complete and verified in NuttX-5.2 This basic port includes basic boot-up, serial console, and timer interrupts. - This port has been verified on the using the NuttX OS test and includes a working - implementation of the NuttShell (NSH). - An extended release will follow and should include SDIO-based SD card - support and device USB. + This port was extended in NuttX 5.3 with a USB high speed driver contributed by David Hewson. + This port has been verified on the using the NuttX OS test, USB serial and mass storage + tests and includes a working implementation of the NuttShell ((NSH)). + An extended release will follow and should include SDIO-based SD card support. 

    -nuttx-5.2 2010-xx-xx Gregory Nutt <spudmonkey@racsa.co.cr>
-
-	* arch/arm/src/sam3u/sam3u_pio.c - Fix an address calculation error
-	  that caused ports B & C to get mapped to the PIOA base address.
-	  This is an important bugfix! (a patch is available)
-	* arch/arm/src/lpc313x/lpc313x_boot.c - Fix an error in the vector
-	  initialization was causing a memory fault.
-	* lib/lib_strtod.c - Add strtod()
-	* lpc3131/ea3131 - Several bring fixes submitted by David Hewson.  The
-	  lpc3131 is almost there!  Thanks David!
-	* arch/arm/src/arm/up_head.S - Corrected backward conditional compilation
-	  that selects if vectors are located at 0x0000:0000 or 0xffff:f000.
-	  This fixes the last show stopper bug in the lpc313x bring-up.
-	* configs/ea3131/nsh - Added a NuttShell (NSH) configuration for the
-	  EA3131.
+nuttx-5.3 2010-04-11 Gregory Nutt <spudmonkey@racsa.co.cr>
+
+	* arch/arm/src/lpc313x/lpc313x_usbdev.c - USB driver for the LPC313x
+	  contributed by David Hewson.
+	* configs/ea3131/src/up_ubstrgc.c, configs/ea3131/usbserial,
+	  configs/ea3131/usbstorage - USB storage and USB serial example support
+	  contributed by David Hewson.
+	* Several important compilation error fixes in lpc313x and (dualspeed) USB
+	  code also contributed by David Hewson.
+	* arch/arm/src/sam3u/sam3u_dmac.c - DMA support for the AT90SAM3U.
+	* arch/arm/src/sam3u/sam3u_hsmci.c - SD memory card support for AT90SAM3U
+	  (Neither the DMA nor the HSMCI driver are functional on the initial checkin).
+	* drivers/usbdev - Several important fixes to the USB mass storage driver
+	  submitted by David Hewson.
+	* configs/olimex-lpc2378, arch/arm/include/lpc2378, and arch/arm/src/lpc2378 -
+	  Basic port of the NXP 2378 on the Olimex board contributed by
+	  Rommel Marcelo.
+	* arch/arm/src/sam3u/sam3u_internal.h - Fixed a critical bug in the AT91SAM3U
+	  PIO decoding.  No PIOs greater than 15 could be used on any port!  Obviously,
+	  no one has been using this port.
 
 pascal-2.0 2010-12-21 Gregory Nutt <spudmonkey@racsa.co.cr>
 
@@ -1650,7 +1689,7 @@ buildroot-1.8 2009-12-21 <spudmonkey@racsa.co.cr>
 
 
 
      -nuttx-5.3 2010-xx-xx Gregory Nutt <spudmonkey@racsa.co.cr>
+nuttx-5.3 2010-04-11 Gregory Nutt <spudmonkey@racsa.co.cr>
 
 	* arch/arm/src/lpc313x/lpc313x_usbdev.c - USB driver for the LPC313x
 	  contributed by David Hewson.
@@ -1660,9 +1699,8 @@ nuttx-5.3 2010-xx-xx Gregory Nutt <spudmonkey@racsa.co.cr>
 	* Several important compilation error fixes in lpc313x and (dualspeed) USB
 	  code also contributed by David Hewson.
 	* arch/arm/src/sam3u/sam3u_dmac.c - DMA support for the AT90SAM3U.
-	  (untested on initial checkin).
 	* arch/arm/src/sam3u/sam3u_hsmci.c - SD memory card support for AT90SAM3U
-	  (incomplete on initial checkin).
+	  (Neither the DMA nor the HSMCI driver are functional on the initial checkin).
 	* drivers/usbdev - Several important fixes to the USB mass storage driver
 	  submitted by David Hewson.
 	* configs/olimex-lpc2378, arch/arm/include/lpc2378, and arch/arm/src/lpc2378 -
@@ -1672,6 +1710,8 @@ nuttx-5.3 2010-xx-xx Gregory Nutt <spudmonkey@racsa.co.cr>
 	  PIO decoding.  No PIOs greater than 15 could be used on any port!  Obviously,
 	  no one has been using this port.
 
+nuttx-5.3 2010-xx-xx Gregory Nutt <spudmonkey@racsa.co.cr>
+
 pascal-2.1 2010-xx-xx Gregory Nutt <spudmonkey@racsa.co.cr>
 
 buildroot-1.9 2010-xx-xx 
diff --git a/nuttx/Documentation/README.html b/nuttx/Documentation/README.html
index 20df92f9c..686ed824b 100755
--- a/nuttx/Documentation/README.html
+++ b/nuttx/Documentation/README.html
@@ -9,7 +9,7 @@
   
     
       
      NuttX README Files
      
-      
      Last Updated: January 21, 2009
      
+      
      Last Updated: Aprill 11, 2009
      
     
   
 
@@ -86,6 +86,10 @@
  |   |   |- include/README.txt
  |   |   |- src/README.txt
  |   |   `- README.txt
+ |   |- olimex-lpc2378/
+ |   |   |- include/README.txt
+ |   |   |- src/README.txt
+ |   |   `- README.txt
  |   |- pjrc-8051/
  |   |   |- include/README.txt
  |   |   |- src/README.txt
diff --git a/nuttx/README.txt b/nuttx/README.txt
index 50239a89c..3222bad92 100755
--- a/nuttx/README.txt
+++ b/nuttx/README.txt
@@ -177,6 +177,10 @@ Below is a guide to the available README files in the NuttX source tree:
  |   |   |- include/README.txt
  |   |   |- src/README.txt
  |   |   `- README.txt
+ |   |- olimex-lpc2378/
+ |   |   |- include/README.txt
+ |   |   |- src/README.txt
+ |   |   `- README.txt
  |   |- pjrc-8051/
  |   |   |- include/README.txt
  |   |   |- src/README.txt
diff --git a/nuttx/ReleaseNotes b/nuttx/ReleaseNotes
index 1b676103f..0b329f101 100644
--- a/nuttx/ReleaseNotes
+++ b/nuttx/ReleaseNotes
@@ -1178,3 +1178,24 @@ implementation of the NuttShell (NSH).
 
 An extended release will follow and should include SDIO-based SD card
 support and device USB.
+
+nuttx-5.3
+^^^^^^^^^
+
+This is the 50th release of NuttX.  This release suport for one new achitecture:
+
+  * A basic port for the NXP LPC2378 MCU on the Olimex-LPC2378 development board
+    was contributed by Rommel Marcelo.
+
+And extensions to two existing architures:
+
+  * David Hewson contributed a dual-speed (full/high) USB device-side driver
+    for the NXP LPC3131 on the Embedded Artists EA3131 development board.
+  * A DMA driver and a high speed MCI driver for the Atmel AT91SAM3U are
+    included (but not fully tested in this release).
+
+Two important bugfix was also included:
+
+  * An important fix to the USB mass storage driver was contributed by
+    David Hewson.
+  * A serious error in the AT91SAM3U PIO handling was fixed.
diff --git a/nuttx/configs/olimex-lpc2378/src/up_leds.c b/nuttx/configs/olimex-lpc2378/src/up_leds.c
index feaaf4455..e360eb5cd 100755
--- a/nuttx/configs/olimex-lpc2378/src/up_leds.c
+++ b/nuttx/configs/olimex-lpc2378/src/up_leds.c
@@ -48,11 +48,12 @@
 #include "chip.h"
 #include "up_arch.h"
 #include "up_internal.h"
-//~ #define LPC23XX_FIO_BASE	0x3fffc000  /* Fast I/O 0 base address */
+//~ #define LPC23XX_FIO_BASE    0x3fffc000  /* Fast I/O 0 base address */
 
 /****************************************************************************
  * Definitions
  ****************************************************************************/
+
 /* P3.0 : P0.7 PINSEL6 LEDS 1-8 */
 #define LEDBIT(led) (0x01 << (led))
 #define ALL_LEDS	(0xFF)
@@ -76,7 +77,6 @@
 //~ #  define LED_DIR_OFFSET LPC23XX_GPIO_DIR_OFFSET
 //~ #endif
 
-
 /****************************************************************************
  * Private Data
  ****************************************************************************/
@@ -97,9 +97,10 @@
 void up_ledinit(void)
 {
   /* Initilize GIOs P1.16-P1.23 */
-  putled8(ALL_LEDS,LED_DIR_OFFSET);
-  putled8(ALL_LEDS,LED_CLR_OFFSET);
-  putled8(LEDBIT(0),LED_SET_OFFSET);
+
+  putled8(ALL_LEDS, LED_DIR_OFFSET);
+  putled8(ALL_LEDS, LED_CLR_OFFSET);
+  putled8(LEDBIT(0), LED_SET_OFFSET);
 }
 
 /****************************************************************************
@@ -108,8 +109,8 @@ void up_ledinit(void)
 
 void up_ledon(int led)
 {
- putled8(~(LEDBIT(led)),LED_MASK_OFFSET);	
- putled8(LEDBIT(led),LED_SET_OFFSET);
+  putled8(~(LEDBIT(led)), LED_MASK_OFFSET);
+  putled8(LEDBIT(led), LED_SET_OFFSET);
 }
 
 /****************************************************************************
@@ -118,7 +119,7 @@ void up_ledon(int led)
 
 void up_ledoff(int led)
 {
-  putled8(LEDBIT(led),LED_CLR_OFFSET);
+  putled8(LEDBIT(led), LED_CLR_OFFSET);
 }
 
 /****************************************************************************
@@ -127,16 +128,14 @@ void up_ledoff(int led)
 
 void up_statledoff(void)
 {
- putled8(~STATLED, FIO1MASK2_OFFSET);
- putled8(STATLED, FIO1CLR2_OFFSET);
+  putled8(~STATLED, FIO1MASK2_OFFSET);
+  putled8(STATLED, FIO1CLR2_OFFSET);
 }
 
 void up_statledon(void)
 {
- putled8(~STATLED, FIO1MASK2_OFFSET);
- putled8(STATLED, FIO1SET2_OFFSET);
+  putled8(~STATLED, FIO1MASK2_OFFSET);
+  putled8(STATLED, FIO1SET2_OFFSET);
 }
 
 #endif /* CONFIG_ARCH_LEDS */
-
-
-- 
cgit v1.2.3