From 4dedf494c242b2c4b52707441eefe2a36fbacf0f Mon Sep 17 00:00:00 2001 From: patacongo Date: Thu, 22 Mar 2012 21:22:59 +0000 Subject: First check-in of NxWidgets git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@4505 42af7a65-404d-4744-a932-0658087f49c3 --- NxWidgets/UnitTests/CRadioButton/Makefile | 172 ++++++++++++ .../UnitTests/CRadioButton/cradiobuttontest.cxx | 305 +++++++++++++++++++++ .../UnitTests/CRadioButton/cradiobuttontest.hxx | 162 +++++++++++ NxWidgets/UnitTests/CRadioButton/main.cxx | 238 ++++++++++++++++ 4 files changed, 877 insertions(+) create mode 100644 NxWidgets/UnitTests/CRadioButton/Makefile create mode 100644 NxWidgets/UnitTests/CRadioButton/cradiobuttontest.cxx create mode 100644 NxWidgets/UnitTests/CRadioButton/cradiobuttontest.hxx create mode 100644 NxWidgets/UnitTests/CRadioButton/main.cxx (limited to 'NxWidgets/UnitTests/CRadioButton') diff --git a/NxWidgets/UnitTests/CRadioButton/Makefile b/NxWidgets/UnitTests/CRadioButton/Makefile new file mode 100644 index 000000000..0b4906dd8 --- /dev/null +++ b/NxWidgets/UnitTests/CRadioButton/Makefile @@ -0,0 +1,172 @@ +################################################################################# +# NxWidgets/UnitTests/CRadioButton/Makefile +# +# Copyright (C) 2012 Gregory Nutt. All rights reserved. +# Author: Gregory Nutt +# +# Redistribution and use in source and binary forms, with or without +# modification, are permitted provided that the following conditions +# are met: +# +# 1. Redistributions of source code must retain the above copyright +# notice, this list of conditions and the following disclaimer. +# 2. Redistributions in binary form must reproduce the above copyright +# notice, this list of conditions and the following disclaimer in +# the documentation and/or other materials provided with the +# distribution. +# 3. Neither the name NuttX, NxWidgets, nor the names of its contributors +# me be used to endorse or promote products derived from this software +# without specific prior written permission. +# +# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS +# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT +# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS +# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE +# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, +# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, +# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS +# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED +# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT +# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN +# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE +# POSSIBILITY OF SUCH DAMAGE. +# +################################################################################# + +TESTDIR := ${shell pwd | sed -e 's/ /\\ /g'} + +-include $(TOPDIR)/.config +-include $(TOPDIR)/Make.defs +include $(APPDIR)/Make.defs + +# Add the path to the NXWidget include directory to the CFLAGS + +NXWIDGETS_DIR="$(TESTDIR)/../../NXWidgets/libnxwidgets" +NXWIDGETS_INC="$(NXWIDGETS_DIR)/include" +NXWIDGETS_LIB="$(NXWIDGETS_DIR)/libnxwidgets$(LIBEXT)" + +INCDIR=$(TOPDIR)/tools/incdir.sh +ifeq ($(WINTOOL),y) + CFLAGS += ${shell $(INCDIR) -w "$(CC)" "$(NXWIDGETS_INC)"} + CXXFLAGS += ${shell $(INCDIR) -w "$(CXX)" "$(NXWIDGETS_INC)"} +else + CFLAGS += ${shell $(INCDIR) "$(CC)" "$(NXWIDGETS_INC)"} + CXXFLAGS += ${shell $(INCDIR) "$(CXX)" "$(NXWIDGETS_INC)"} +endif + +# Get the path to the archiver tool + +TESTTOOL_DIR="$(TESTDIR)/../tools" +ARCHIVER=$(TESTTOOL_DIR)/addobjs.sh + +# Hello, World! C++ Example + +ASRCS = +CSRCS = +CXXSRCS = main.cxx cradiobuttontest.cxx + +AOBJS = $(ASRCS:.S=$(OBJEXT)) +COBJS = $(CSRCS:.c=$(OBJEXT)) +CXXOBJS = $(CXXSRCS:.cxx=$(OBJEXT)) + +SRCS = $(ASRCS) $(CSRCS) $(CXXSRCS) +OBJS = $(AOBJS) $(COBJS) $(CXXOBJS) + +POSIX_BIN = "$(APPDIR)/libapps$(LIBEXT)" +ifeq ($(WINTOOL),y) + BIN = "${shell cygpath -w $(POSIX_BIN)}" +else + BIN = $(POSIX_BIN) +endif + +ROOTDEPPATH = --dep-path . + +# helloxx built-in application info + +APPNAME = cradiobutton +PRIORITY = SCHED_PRIORITY_DEFAULT +STACKSIZE = 2048 + +# Common build + +VPATH = + +all: .built +.PHONY: clean depend context disclean chkcxx chklib + +# Object file creation targets + +$(AOBJS): %$(OBJEXT): %.S + $(call ASSEMBLE, $<, $@) + +$(COBJS): %$(OBJEXT): %.c + $(call COMPILE, $<, $@) + +$(CXXOBJS): %$(OBJEXT): %.cxx + $(call COMPILEXX, $<, $@) + +# Verify that the NuttX configuration is setup to support C++ + +chkcxx: +ifneq ($(CONFIG_HAVE_CXX),y) + @echo "" + @echo "In order to use this example, you toolchain must support must" + @echo "" + @echo " (1) Explicitly select CONFIG_HAVE_CXX to build in C++ support" + @echo " (2) Define CXX, CXXFLAGS, and COMPILEXX in the Make.defs file" + @echo " of the configuration that you are using." + @echo "" + @exit 1 +endif + +# Verify that the NXWidget library has been built + +chklib: + @( \ + if [ ! -e "$(NXWIDGETS_LIB)" ]; then \ + echo "$(NXWIDGETS_LIB) does not exist."; \ + echo "Please go to $(NXWIDGETS_DIR)"; \ + echo "and rebuild the library"; \ + exit 1; \ + fi; \ + ) + +# Library creation targets + +$(NXWIDGETS_LIB): # Just to keep make happy. chklib does the work. + +.built: chkcxx chklib $(OBJS) $(NXWIDGETS_LIB) + @( for obj in $(OBJS) ; do \ + $(call ARCHIVE, $(BIN), $${obj}); \ + done ; ) +ifeq ($(WINTOOL),y) + @$(ARCHIVER) -w -p "$(CROSSDEV)" $(BIN) $(NXWIDGETS_DIR) +else + @$(ARCHIVER) -p "$(CROSSDEV)" $(BIN) $(NXWIDGETS_DIR) +endif + @touch .built + +# Standard housekeeping targets + +.context: +ifeq ($(CONFIG_NSH_BUILTIN_APPS),y) + $(call REGISTER,$(APPNAME),$(PRIORITY),$(STACKSIZE),$(APPNAME)_main) +endif + @touch $@ + +context: .context + +.depend: Makefile $(SRCS) + @$(MKDEP) $(ROOTDEPPATH) $(CXX) -- $(CXXFLAGS) -- $(SRCS) >Make.dep + @touch $@ + +depend: .depend + +clean: + @rm -f *.o *~ .*.swp .built + $(call CLEAN) + +distclean: clean + @rm -f Make.dep .depend + +-include Make.dep diff --git a/NxWidgets/UnitTests/CRadioButton/cradiobuttontest.cxx b/NxWidgets/UnitTests/CRadioButton/cradiobuttontest.cxx new file mode 100644 index 000000000..f97089ce7 --- /dev/null +++ b/NxWidgets/UnitTests/CRadioButton/cradiobuttontest.cxx @@ -0,0 +1,305 @@ +///////////////////////////////////////////////////////////////////////////// +// NxWidgets/UnitTests/CRadioButton/cradiobuttontest.cxx +// +// Copyright (C) 2012 Gregory Nutt. All rights reserved. +// Author: Gregory Nutt +// +// Redistribution and use in source and binary forms, with or without +// modification, are permitted provided that the following conditions +// are met: +// +// 1. Redistributions of source code must retain the above copyright +// notice, this list of conditions and the following disclaimer. +// 2. Redistributions in binary form must reproduce the above copyright +// notice, this list of conditions and the following disclaimer in +// the documentation and/or other materials provided with the +// distribution. +// 3. Neither the name NuttX, NxWidgets, nor the names of its contributors +// me be used to endorse or promote products derived from this software +// without specific prior written permission. +// +// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS +// "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT +// LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS +// FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE +// COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, +// INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, +// BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS +// OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED +// AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT +// LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN +// ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE +// POSSIBILITY OF SUCH DAMAGE. +// +////////////////////////////////////////////////////////////////////////////// + +///////////////////////////////////////////////////////////////////////////// +// Included Files +///////////////////////////////////////////////////////////////////////////// + +#include + +#include +#include +#include +#include + +#include +#include + +#include "nxconfig.hxx" +#include "cbgwindow.hxx" +#include "cradiobuttontest.hxx" +#include "cbitmap.hxx" +#include "glyphs.hxx" + +///////////////////////////////////////////////////////////////////////////// +// Definitions +///////////////////////////////////////////////////////////////////////////// + +///////////////////////////////////////////////////////////////////////////// +// Private Classes +///////////////////////////////////////////////////////////////////////////// + +///////////////////////////////////////////////////////////////////////////// +// Private Data +///////////////////////////////////////////////////////////////////////////// + +///////////////////////////////////////////////////////////////////////////// +// Public Data +///////////////////////////////////////////////////////////////////////////// + +///////////////////////////////////////////////////////////////////////////// +// Public Function Prototypes +///////////////////////////////////////////////////////////////////////////// + +///////////////////////////////////////////////////////////////////////////// +// CRadioButtonTest Method Implementations +///////////////////////////////////////////////////////////////////////////// + +// CRadioButtonTest Constructor + +CRadioButtonTest::CRadioButtonTest() +{ + // Initialize state data + + m_widgetControl = (CWidgetControl *)NULL; + m_bgWindow = (CBgWindow *)NULL; + + // Peek at the radio button glyph to get a good estimate of the size + + m_size.w = g_radioButtonOn.width; + m_size.h = g_radioButtonOn.height; +} + +// CRadioButtonTest Descriptor + +CRadioButtonTest::~CRadioButtonTest(void) +{ + disconnect(); +} + +// Connect to the NX server + +bool CRadioButtonTest::connect(void) +{ + // Connect to the server + + bool nxConnected = CNxServer::connect(); + if (nxConnected) + { + // Set the background color + + if (!setBackgroundColor(CONFIG_CRADIOBUTTONTEST_BGCOLOR)) + { + message("CRadioButtonTest::connect: setBackgroundColor failed\n"); + } + } + + return nxConnected; +} + +// Disconnect from the NX server + +void CRadioButtonTest::disconnect(void) +{ + // Free the radiobutton group + + if (m_radioButtonGroup) + { + delete m_radioButtonGroup; + m_radioButtonGroup = (CRadioButtonGroup *)NULL; + } + + // Close the window + + if (m_bgWindow) + { + delete m_bgWindow; + } + + // Free the widget control instance + + if (m_widgetControl) + { + delete m_widgetControl; + } + + // And disconnect from the server + + CNxServer::disconnect(); +} + +// Create the background window instance. This function illustrates +// the basic steps to instantiate any window: +// +// 1) Create a dumb CWigetControl instance +// 2) Pass the dumb CWidgetControl instance to the window constructor +// that inherits from INxWindow. This will "smarten" the CWidgetControl +// instance with some window knowlede +// 3) Call the open() method on the window to display the window. +// 4) After that, the fully smartened CWidgetControl instance can +// be used to generate additional widgets by passing it to the +// widget constructor + +bool CRadioButtonTest::createWindow(void) +{ + // Initialize the widget control using the default style + + m_widgetControl = new CWidgetControl((CWidgetStyle *)NULL); + + // Get an (uninitialized) instance of the background window as a class + // that derives from INxWindow. + + m_bgWindow = getBgWindow(m_widgetControl); + if (!m_bgWindow) + { + message("CRadioButtonTest::createGraphics: Failed to create CBgWindow instance\n"); + delete m_widgetControl; + return false; + } + + // Open (and initialize) the window + + bool success = m_bgWindow->open(); + if (!success) + { + message("CRadioButtonTest::createGraphics: Failed to open background window\n"); + delete m_bgWindow; + m_bgWindow = (CBgWindow*)0; + return false; + } + + return true; +} + +// Create a CRadioButton instance + +CRadioButton *CRadioButtonTest::newRadioButton(void) +{ + // Get the width of the display + + struct nxgl_size_s windowSize; + if (!m_bgWindow->getSize(&windowSize)) + { + message("CRadioButtonTest::newRadioButton: Failed to get window size\n"); + return (CRadioButton *)NULL; + } + + // Create the radio button group, if we have not already done so + + if (!m_radioButtonGroup) + { + // Start the radio button group in the center of the upper, left + // quadrant. The initial size is 0,0 and the default style is used. + + nxgl_coord_t groupX = windowSize.w >> 2; + nxgl_coord_t groupY = windowSize.h >> 2; + + m_radioButtonGroup = new CRadioButtonGroup(m_widgetControl, groupX, groupY); + if (!m_radioButtonGroup) + { + message("CRadioButtonTest::newRadioButton: Failed to create the radio button group\n"); + return (CRadioButton *)NULL; + } + } + + // Create the new radio button at the botton of the radio button group and + // with the size of the ON radio button glyph (they all need to be the same + // size!). Note that coordinates are relative to the parent bounding box. + + nxgl_coord_t buttonX = 0; + nxgl_coord_t buttonY = m_radioButtonGroup->getHeight(); + + return m_radioButtonGroup->newRadioButton(buttonX, buttonY, m_size.w, m_size.h); +} + +// (Re-)draw the buttons. + +void CRadioButtonTest::showButtons(void) +{ + m_radioButtonGroup->enable(); // Un-necessary, the widget is enabled by default + m_radioButtonGroup->enableDrawing(); + m_radioButtonGroup->redraw(); +} + +// Push the radio button + +void CRadioButtonTest::pushButton(CRadioButton *button) +{ + // Get the button center coordinates + + nxgl_coord_t buttonX = button->getX() + (button->getWidth() >> 1); + nxgl_coord_t buttonY = button->getY() + (button->getHeight() >> 1); + + // Then push the button by calling nx_mousein. nx_mousein is meant to be + // called by mouse handling software. Here we just inject a left-button click + // directly in the center of the radio button. + + // First, get the server handle. Graphics software will never care + // about the server handle. Here we need it to get access to the + // low-level mouse interface + + NXHANDLE handle = getServer(); + + // Then inject the mouse click + + (void)nx_mousein(handle, buttonX, buttonY, NX_MOUSE_LEFTBUTTON); + + // Poll for mouse events + // + // Widget events are normally handled in a modal loop (by calling goModal()). + // However, for this case we know that we just pressed the mouse button + // so we don't have to poll. We can just perform a one pass poll then + // then check if the mouse event was processed corredly. + + m_widgetControl->pollEvents(m_radioButtonGroup); + + // Then inject the mouse release + + (void)nx_mousein(handle, buttonX, buttonY, 0); + + // And poll for more mouse events + + m_widgetControl->pollEvents(m_radioButtonGroup); + + // And re-draw the buttons (the mouse click event should have automatically + // triggered the re-draw) + // + // showButtons(); +} + +// Show the state of the radio button group + +void CRadioButtonTest::showButtonState(void) +{ + int index = m_radioButtonGroup->getSelectedIndex(); + if (index < 0) + { + message("CRadioButtonTest::showButtonState No button is pressed\n"); + } + else + { + message("CRadioButtonTest::showButtonState button%d is selected\n", index+1); + } +} diff --git a/NxWidgets/UnitTests/CRadioButton/cradiobuttontest.hxx b/NxWidgets/UnitTests/CRadioButton/cradiobuttontest.hxx new file mode 100644 index 000000000..563049dcf --- /dev/null +++ b/NxWidgets/UnitTests/CRadioButton/cradiobuttontest.hxx @@ -0,0 +1,162 @@ +///////////////////////////////////////////////////////////////////////////// +// NxWidgets/UnitTests/CRadioButton/cradiobuttontest.hxx +// +// Copyright (C) 2012 Gregory Nutt. All rights reserved. +// Author: Gregory Nutt +// +// Redistribution and use in source and binary forms, with or without +// modification, are permitted provided that the following conditions +// are met: +// +// 1. Redistributions of source code must retain the above copyright +// notice, this list of conditions and the following disclaimer. +// 2. Redistributions in binary form must reproduce the above copyright +// notice, this list of conditions and the following disclaimer in +// the documentation and/or other materials provided with the +// distribution. +// 3. Neither the name NuttX, NxWidgets, nor the names of its contributors +// me be used to endorse or promote products derived from this software +// without specific prior written permission. +// +// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS +// "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT +// LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS +// FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE +// COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, +// INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, +// BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS +// OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED +// AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT +// LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN +// ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE +// POSSIBILITY OF SUCH DAMAGE. +// +////////////////////////////////////////////////////////////////////////////// + +#ifndef __UNITTESTS_CRADIOBUTTON_CRADIOBUTTONTEST_HXX +#define __UNITTESTS_CRADIOBUTTON_CRADIOBUTTONTEST_HXX + +///////////////////////////////////////////////////////////////////////////// +// Included Files +///////////////////////////////////////////////////////////////////////////// + +#include + +#include +#include +#include +#include + +#include + +#include "nxconfig.hxx" +#include "cwidgetcontrol.hxx" +#include "ccallback.hxx" +#include "cbgwindow.hxx" +#include "cnxserver.hxx" +#include "cradiobutton.hxx" +#include "cradiobuttongroup.hxx" + +///////////////////////////////////////////////////////////////////////////// +// Definitions +///////////////////////////////////////////////////////////////////////////// +// Configuration //////////////////////////////////////////////////////////// + +#ifndef CONFIG_HAVE_CXX +# error "CONFIG_HAVE_CXX must be defined" +#endif + +#ifndef CONFIG_CRADIOBUTTONTEST_BGCOLOR +# define CONFIG_CRADIOBUTTONTEST_BGCOLOR CONFIG_NXWIDGETS_DEFAULT_BACKCOLOR +#endif + +// What is the entry point called? + +#ifdef CONFIG_NSH_BUILTIN_APPS +# define MAIN_NAME cradiobutton_main +# define MAIN_STRING "cradiobutton_main: " +#else +# define MAIN_NAME user_start +# define MAIN_STRING "user_start: " +#endif + +// If debug is enabled, use the debug function, lib_rawprintf() instead +// of printf() so that the output is synchronized. + +#ifdef CONFIG_DEBUG +# define message lib_lowprintf +#else +# define message printf +#endif + +///////////////////////////////////////////////////////////////////////////// +// Public Classes +///////////////////////////////////////////////////////////////////////////// + +using namespace NXWidgets; + +class CRadioButtonTest : public CNxServer +{ +private: + CWidgetControl *m_widgetControl; // The controlling widget for the window + CBgWindow *m_bgWindow; // Background window instance + CRadioButtonGroup *m_radioButtonGroup; // The radio button group + + // These are the dimensions that we will use for creating new radio buttons + + struct nxgl_size_s m_size; // The size of each radio button + +public: + // Constructor/destructors + + CRadioButtonTest(void); + ~CRadioButtonTest(void); + + // Initializer/unitializer. These methods encapsulate the basic steps for + // starting and stopping the NX server + + bool connect(void); + void disconnect(void); + + // Create a window. This method provides the general operations for + // creating a window that you can draw within. + // + // Those general operations are: + // 1) Create a dumb CWigetControl instance + // 2) Pass the dumb CWidgetControl instance to the window constructor + // that inherits from INxWindow. This will "smarten" the CWidgetControl + // instance with some window knowlede + // 3) Call the open() method on the window to display the window. + // 4) After that, the fully smartened CWidgetControl instance can + // be used to generate additional widgets by passing it to the + // widget constructor + + bool createWindow(void); + + // (Re-)draw the buttons. + + void showButtons(void); + + // Create a CRadioButton instance. This method will show you how to create + // a CRadioButton widget + + CRadioButton *newRadioButton(void); + + // Simulate pushing and releasing of the radio button + + void pushButton(CRadioButton *button); + + // Show the state of the radio button group + + void showButtonState(void); +}; + +///////////////////////////////////////////////////////////////////////////// +// Public Data +///////////////////////////////////////////////////////////////////////////// + +///////////////////////////////////////////////////////////////////////////// +// Public Function Prototypes +///////////////////////////////////////////////////////////////////////////// + +#endif // __UNITTESTS_CRADIOBUTTON_CRADIOBUTTONTEST_HXX diff --git a/NxWidgets/UnitTests/CRadioButton/main.cxx b/NxWidgets/UnitTests/CRadioButton/main.cxx new file mode 100644 index 000000000..d53cd4a09 --- /dev/null +++ b/NxWidgets/UnitTests/CRadioButton/main.cxx @@ -0,0 +1,238 @@ +///////////////////////////////////////////////////////////////////////////// +// NxWidgets/UnitTests/CRadioButton/main.cxx +// +// Copyright (C) 2012 Gregory Nutt. All rights reserved. +// Author: Gregory Nutt +// +// Redistribution and use in source and binary forms, with or without +// modification, are permitted provided that the following conditions +// are met: +// +// 1. Redistributions of source code must retain the above copyright +// notice, this list of conditions and the following disclaimer. +// 2. Redistributions in binary form must reproduce the above copyright +// notice, this list of conditions and the following disclaimer in +// the documentation and/or other materials provided with the +// distribution. +// 3. Neither the name NuttX, NxWidgets, nor the names of its contributors +// me be used to endorse or promote products derived from this software +// without specific prior written permission. +// +// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS +// "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT +// LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS +// FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE +// COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, +// INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, +// BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS +// OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED +// AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT +// LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN +// ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE +// POSSIBILITY OF SUCH DAMAGE. +// +////////////////////////////////////////////////////////////////////////////// + +///////////////////////////////////////////////////////////////////////////// +// Included Files +///////////////////////////////////////////////////////////////////////////// + +#include + +#include +#include +#include +#include +#include +#include + +#include + +#include "crlepalettebitmap.hxx" +#include "glyphs.hxx" +#include "cradiobuttontest.hxx" + +///////////////////////////////////////////////////////////////////////////// +// Definitions +///////////////////////////////////////////////////////////////////////////// + +///////////////////////////////////////////////////////////////////////////// +// Private Classes +///////////////////////////////////////////////////////////////////////////// + +///////////////////////////////////////////////////////////////////////////// +// Private Data +///////////////////////////////////////////////////////////////////////////// + +static unsigned int g_mmInitial; +static unsigned int g_mmprevious; + +///////////////////////////////////////////////////////////////////////////// +// Public Function Prototypes +///////////////////////////////////////////////////////////////////////////// + +// Suppress name-mangling + +extern "C" int MAIN_NAME(int argc, char *argv[]); + +///////////////////////////////////////////////////////////////////////////// +// Private Functions +///////////////////////////////////////////////////////////////////////////// + +///////////////////////////////////////////////////////////////////////////// +// Name: updateMemoryUsage +///////////////////////////////////////////////////////////////////////////// + +static void updateMemoryUsage(unsigned int previous, + FAR const char *msg) +{ + struct mallinfo mmcurrent; + + /* Get the current memory usage */ + +#ifdef CONFIG_CAN_PASS_STRUCTS + mmcurrent = mallinfo(); +#else + (void)mallinfo(&mmcurrent); +#endif + + /* Show the change from the previous time */ + + message("\n%s:\n", msg); + message(" Before: %8d After: %8d Change: %8d\n\n", + previous, mmcurrent.uordblks, mmcurrent.uordblks - previous); + + /* Set up for the next test */ + + g_mmprevious = mmcurrent.uordblks; +} + +///////////////////////////////////////////////////////////////////////////// +// Name: initMemoryUsage +///////////////////////////////////////////////////////////////////////////// + +static void initMemoryUsage(void) +{ + struct mallinfo mmcurrent; + + /* Get the current memory usage */ + +#ifdef CONFIG_CAN_PASS_STRUCTS + mmcurrent = mallinfo(); +#else + (void)mallinfo(&mmcurrent); +#endif + + g_mmInitial = mmcurrent.uordblks; + g_mmprevious = mmcurrent.uordblks; +} + +///////////////////////////////////////////////////////////////////////////// +// Public Functions +///////////////////////////////////////////////////////////////////////////// + +///////////////////////////////////////////////////////////////////////////// +// Name: user_start/nxheaders_main +///////////////////////////////////////////////////////////////////////////// + +int MAIN_NAME(int argc, char *argv[]) +{ + // Initialize memory monitor logic + + initMemoryUsage(); + + // Create an instance of the radio button test + + message(MAIN_STRING "Create CRadioButtonTest instance\n"); + CRadioButtonTest *test = new CRadioButtonTest(); + updateMemoryUsage(g_mmprevious, "After creating CRadioButtonTest"); + + // Connect the NX server + + message(MAIN_STRING "Connect the CRadioButtonTest instance to the NX server\n"); + if (!test->connect()) + { + message(MAIN_STRING "Failed to connect the CRadioButtonTest instance to the NX server\n"); + delete test; + return 1; + } + updateMemoryUsage(g_mmprevious, MAIN_STRING "After connecting to the server"); + + // Create a window to draw into + + message(MAIN_STRING "Create a Window\n"); + if (!test->createWindow()) + { + message(MAIN_STRING "Failed to create a window\n"); + delete test; + return 1; + } + updateMemoryUsage(g_mmprevious, MAIN_STRING "After creating a window"); + + // Create three radio buttons + + CRadioButton *button1 = test->newRadioButton(); + if (!button1) + { + message(MAIN_STRING "Failed to create radio button 1\n"); + delete test; + return 1; + } + updateMemoryUsage(g_mmprevious, MAIN_STRING "After creating radio button 1"); + + CRadioButton *button2 = test->newRadioButton(); + if (!button2) + { + message(MAIN_STRING "Failed to create radio button 2\n"); + delete test; + return 1; + } + updateMemoryUsage(g_mmprevious, MAIN_STRING "After creating radio button 2"); + + CRadioButton *button3 = test->newRadioButton(); + if (!button3) + { + message(MAIN_STRING "Failed to create radio button 3\n"); + delete test; + return 1; + } + updateMemoryUsage(g_mmprevious, MAIN_STRING "After creating radio button 3"); + + // Show the initial state of the buttons + + test->showButtons(); + test->showButtonState(); + sleep(1); + + // Now push some buttons + + message(MAIN_STRING "Pushing button 1\n"); + test->pushButton(button1); + usleep(500*1000); + test->showButtonState(); + updateMemoryUsage(g_mmprevious, "After pushing button 1"); + usleep(500*1000); + + message(MAIN_STRING "Pushing button 2\n"); + test->pushButton(button2); + usleep(500*1000); + test->showButtonState(); + updateMemoryUsage(g_mmprevious, "After pushing button 2"); + usleep(500*1000); + + message(MAIN_STRING "Pushing button 3\n"); + test->pushButton(button3); + usleep(500*1000); + test->showButtonState(); + updateMemoryUsage(g_mmprevious, "After pushing button 3"); + sleep(2); + + // Clean up and exit + + message(MAIN_STRING "Clean-up and exit\n"); + delete test; + updateMemoryUsage(g_mmprevious, "After deleting the test"); + updateMemoryUsage(g_mmInitial, "Final memory usage"); + return 0; +} + -- cgit v1.2.3