From 84ebd8284c5c2f190ee154e0124fc5ddccbb0361 Mon Sep 17 00:00:00 2001 From: patacongo Date: Wed, 25 Jan 2012 20:50:57 +0000 Subject: Massive name change USB STRG -> USB MSC git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@4335 42af7a65-404d-4744-a932-0658087f49c3 --- apps/examples/README.txt | 38 +++++++++++++++++++------------------- 1 file changed, 19 insertions(+), 19 deletions(-) (limited to 'apps/examples/README.txt') diff --git a/apps/examples/README.txt b/apps/examples/README.txt index 223f34e81..1955b7a7d 100644 --- a/apps/examples/README.txt +++ b/apps/examples/README.txt @@ -1034,57 +1034,57 @@ examples/usbstorage the device using the USB storage class driver. In order to use this example, your board-specific logic must provide the function: - void usbstrg_archinitialize(void); + void usbmsc_archinitialize(void); This function will be called by the example/usbstorage in order to do the actual registration of the block device drivers. For examples - of the implementation of usbstrg_archinitialize() see - configs/mcu123-lpc124x/src/up_usbstrg.c or - configs/stm3210e-eval/src/usbstrg.c + of the implementation of usbmsc_archinitialize() see + configs/mcu123-lpc124x/src/up_usbmsc.c or + configs/stm3210e-eval/src/usbmsc.c Configuration options: - CONFIG_EXAMPLES_USBSTRG_BUILTIN + CONFIG_EXAMPLES_USBMSC_BUILTIN This example can be built as two NSH "built-in" commands if this option is selection: 'msconn' will connect the USB mass storage device; 'msdis' will disconnect the USB storage device. - CONFIG_EXAMPLES_USBSTRG_NLUNS + CONFIG_EXAMPLES_USBMSC_NLUNS Defines the number of logical units (LUNs) exported by the USB storage driver. Each LUN corresponds to one exported block driver (or partition of a block driver). May be 1, 2, or 3. Default is 1. - CONFIG_EXAMPLES_USBSTRG_DEVMINOR1 + CONFIG_EXAMPLES_USBMSC_DEVMINOR1 The minor device number of the block driver for the first LUN. For example, N in /dev/mmcsdN. Used for registering the block driver. Default is zero. - CONFIG_EXAMPLES_USBSTRG_DEVPATH1 + CONFIG_EXAMPLES_USBMSC_DEVPATH1 The full path to the registered block driver. Default is "/dev/mmcsd0" - CONFIG_EXAMPLES_USBSTRG_DEVMINOR2 and CONFIG_EXAMPLES_USBSTRG_DEVPATH2 - Similar parameters that would have to be provided if CONFIG_EXAMPLES_USBSTRG_NLUNS + CONFIG_EXAMPLES_USBMSC_DEVMINOR2 and CONFIG_EXAMPLES_USBMSC_DEVPATH2 + Similar parameters that would have to be provided if CONFIG_EXAMPLES_USBMSC_NLUNS is 2 or 3. No defaults. - CONFIG_EXAMPLES_USBSTRG_DEVMINOR3 and CONFIG_EXAMPLES_USBSTRG_DEVPATH3 - Similar parameters that would have to be provided if CONFIG_EXAMPLES_USBSTRG_NLUNS + CONFIG_EXAMPLES_USBMSC_DEVMINOR3 and CONFIG_EXAMPLES_USBMSC_DEVPATH3 + Similar parameters that would have to be provided if CONFIG_EXAMPLES_USBMSC_NLUNS is 3. No defaults. - CONFIG_EXAMPLES_USBSTRG_DEBUGMM + CONFIG_EXAMPLES_USBMSC_DEBUGMM Enables some debug tests to check for memory usage and memory leaks. If CONFIG_USBDEV_TRACE is enabled (or CONFIG_DEBUG and CONFIG_DEBUG_USB), then the example code will also manage the USB trace output. The amount of trace output can be controlled using: - CONFIG_EXAMPLES_USBSTRG_TRACEINIT + CONFIG_EXAMPLES_USBMSC_TRACEINIT Show initialization events - CONFIG_EXAMPLES_USBSTRG_TRACECLASS + CONFIG_EXAMPLES_USBMSC_TRACECLASS Show class driver events - CONFIG_EXAMPLES_USBSTRG_TRACETRANSFERS + CONFIG_EXAMPLES_USBMSC_TRACETRANSFERS Show data transfer events - CONFIG_EXAMPLES_USBSTRG_TRACECONTROLLER + CONFIG_EXAMPLES_USBMSC_TRACECONTROLLER Show controller events - CONFIG_EXAMPLES_USBSTRG_TRACEINTERRUPTS + CONFIG_EXAMPLES_USBMSC_TRACEINTERRUPTS Show interrupt-related events. Error results are always shown in the trace output - NOTE 1: When built as an NSH add-on command (CONFIG_EXAMPLES_USBSTRG_BUILTIN=y), + NOTE 1: When built as an NSH add-on command (CONFIG_EXAMPLES_USBMSC_BUILTIN=y), Caution should be used to assure that the SD drive (or other storage device) is not in use when the USB storage device is configured. Specifically, the SD driver should be unmounted like: -- cgit v1.2.3