From 97ef769f2d180b5809c2f9513cf4bb66de1f2595 Mon Sep 17 00:00:00 2001 From: Gregory Nutt Date: Wed, 25 Sep 2013 18:50:14 -0600 Subject: Mov apps/examples/composite to apps/system/composite; convert configs/stm3210e-eval/composite to use kconfig-frontend tools -- untested --- apps/examples/Kconfig | 1 - apps/examples/Make.defs | 4 - apps/examples/Makefile | 12 +- apps/examples/README.txt | 78 --- apps/examples/composite/.gitignore | 11 - apps/examples/composite/Kconfig | 64 --- apps/examples/composite/Makefile | 117 ----- apps/examples/composite/composite.h | 259 ---------- apps/examples/composite/composite_main.c | 850 ------------------------------- 9 files changed, 6 insertions(+), 1390 deletions(-) delete mode 100644 apps/examples/composite/.gitignore delete mode 100644 apps/examples/composite/Kconfig delete mode 100644 apps/examples/composite/Makefile delete mode 100644 apps/examples/composite/composite.h delete mode 100644 apps/examples/composite/composite_main.c (limited to 'apps/examples') diff --git a/apps/examples/Kconfig b/apps/examples/Kconfig index 3f699148d..505ba5670 100644 --- a/apps/examples/Kconfig +++ b/apps/examples/Kconfig @@ -7,7 +7,6 @@ source "$APPSDIR/examples/adc/Kconfig" source "$APPSDIR/examples/buttons/Kconfig" source "$APPSDIR/examples/can/Kconfig" source "$APPSDIR/examples/cc3000/Kconfig" -source "$APPSDIR/examples/composite/Kconfig" source "$APPSDIR/examples/cxxtest/Kconfig" source "$APPSDIR/examples/dhcpd/Kconfig" source "$APPSDIR/examples/elf/Kconfig" diff --git a/apps/examples/Make.defs b/apps/examples/Make.defs index 944739a12..d4615e2f7 100644 --- a/apps/examples/Make.defs +++ b/apps/examples/Make.defs @@ -50,10 +50,6 @@ ifeq ($(CONFIG_EXAMPLES_CC3000BASIC),y) CONFIGURED_APPS += examples/cc3000 endif -ifeq ($(CONFIG_EXAMPLES_COMPOSITE),y) -CONFIGURED_APPS += examples/composite -endif - ifeq ($(CONFIG_EXAMPLES_CXXTEST),y) CONFIGURED_APPS += examples/cxxtest endif diff --git a/apps/examples/Makefile b/apps/examples/Makefile index daa944e89..b629efa77 100644 --- a/apps/examples/Makefile +++ b/apps/examples/Makefile @@ -37,10 +37,10 @@ # Sub-directories -SUBDIRS = adc buttons can cc3000 composite cxxtest dhcpd discover elf -SUBDIRS += flash_test ftpc ftpd hello helloxx hidkbd igmp json keypadtest -SUBDIRS += lcdrw mm modbus mount mtdpart nettest nrf24l01_term nsh null -SUBDIRS += nx nxconsole nxffs nxflat nxhello nximage nxlines nxtext ostest +SUBDIRS = adc buttons can cc3000 cxxtest dhcpd discover elf flash_test +SUBDIRS += ftpc ftpd hello helloxx hidkbd igmp json keypadtest lcdrw +SUBDIRS += mm modbus mount mtdpart nettest nrf24l01_term nsh null nx +SUBDIRS += nxconsole nxffs nxflat nxhello nximage nxlines nxtext ostest SUBDIRS += pashello pipe poll posix_spawn pwm qencoder relays rgmp romfs SUBDIRS += sendmail serloop slcd smart smart_test tcpecho telnetd thttpd tiff SUBDIRS += touchscreen udp uip usbserial usbterm watchdog wget wgetjson @@ -53,8 +53,8 @@ SUBDIRS += xmlrpc CNTXTDIRS = pwm ifeq ($(CONFIG_NSH_BUILTIN_APPS),y) -CNTXTDIRS += adc can cc3000 composite cxxtest dhcpd discover flash_test -CNTXTDIRS += ftpd hello helloxx json keypadtestmodbus lcdrw mtdpart nettest +CNTXTDIRS += adc can cc3000 cxxtest dhcpd discover flash_test ftpd +CNTXTDIRS += hello helloxx json keypadtestmodbus lcdrw mtdpart nettest CNTXTDIRS += nx nxhello nximage nxlines nxtext nrf24l01_term ostest relays CNTXTDIRS += qencoder slcd smart_test tcpecho telnetd tiff touchscreen CNTXTDIRS += usbterm watchdog wgetjson diff --git a/apps/examples/README.txt b/apps/examples/README.txt index 29dd6fa7d..85b0e60fc 100644 --- a/apps/examples/README.txt +++ b/apps/examples/README.txt @@ -131,84 +131,6 @@ examples/cc3000 This is a test for the TI CC3000 wireless networking module. -examples/composite -^^^^^^^^^^^^^^^^^^ - - This example test a USB composite device. The only supported composite is - CDC/ACM serial with a USB mass storage device. - - Required overall configuration: - - CONFIG_USBDEV=y - USB device support - CONFIG_USBDEV_COMPOSITE=y - USB composite device support - CONFIG_COMPOSITE_IAD=y - Interface associate descriptor needed - - CONFIG_CDCACM=y - USB CDC/ACM serial device support - CONFIG_CDCACM_COMPOSITE=y - USB CDC/ACM serial composite device support - CONFIG_CDCACM_IFNOBASE=0 - CDC/ACM interfaces start with number 0 - CONFIG_CDCACM_STRBASE=4 - Base of string numbers (not really needed) - CONFIG_CDCACM_EPINTIN=1 - Endpoint numbers must be unique - CONFIG_CDCACM_EPBULKIN=2 - CONFIG_CDCACM_EPBULKOUT=3 - - CONFIG_USBMSC - USB mass storage device support - CONFIG_USBMSC_COMPOSITE=y - USB mass storage composite device support - CONFIG_USBMSC_IFNOBASE=2 - USB mass storage interfaces start with number 2 - CONFIG_USBMSC_STRBASE=4 - Base of string numbers (needed) - CONFIG_USBMSC_EPBULKOUT=4 - Endpoint numbers must be unique - CONFIG_USBMSC_EPBULKIN=5 - - CONFIG_NSH_BUILTIN_APPS - This example can be built as two NSH "built-in" commands if this option - is selected: 'conn' will connect the USB composite device; 'msdis' - will disconnect the USB composite device. - - Configuration options unique to this example: - - CONFIG_EXAMPLES_COMPOSITE_DEBUGMM - Enables some debug tests to check for memory usage and memory leaks. - - CONFIG_EXAMPLES_COMPOSITE_NLUNS - Defines the number of logical units (LUNs) exported by the USB storage - driver. Each LUN corresponds to one exported block driver (or partition - of a block driver). May be 1, 2, or 3. Default is 1. - CONFIG_EXAMPLES_COMPOSITE_DEVMINOR1 - The minor device number of the block driver for the first LUN. For - example, N in /dev/mmcsdN. Used for registering the block driver. Default - is zero. - CONFIG_EXAMPLES_COMPOSITE_DEVPATH1 - The full path to the registered block driver. Default is "/dev/mmcsd0" - CONFIG_EXAMPLES_COMPOSITE_DEVMINOR2 and CONFIG_EXAMPLES_COMPOSITE_DEVPATH2 - Similar parameters that would have to be provided if CONFIG_EXAMPLES_COMPOSITE_NLUNS - is 2 or 3. No defaults. - CONFIG_EXAMPLES_COMPOSITE_DEVMINOR3 and CONFIG_EXAMPLES_COMPOSITE_DEVPATH2 - Similar parameters that would have to be provided if CONFIG_EXAMPLES_COMPOSITE_NLUNS - is 3. No defaults. - CONFIG_EXAMPLES_COMPOSITE_BUFLEN. Default 256. - - CONFIG_EXAMPLES_COMPOSITE_TTYUSB - The minor number of the USB serial device. - Default is zero (corresponding to /dev/ttyUSB0 or /dev/ttyACM0). Default is zero. - CCONFIG_EXAMPLES_COMPOSITE_SERDEV - The string corresponding to - CONFIG_EXAMPLES_COMPOSITE_TTYUSB. The default is "/dev/ttyUSB0" (for the PL2303 - emulation) or "/dev/ttyACM0" (for the CDC/ACM serial device). - CONFIG_EXAMPLES_COMPOSITE_BUFSIZE - The size of the serial I/O buffer in - bytes. Default 256 bytes. - - If CONFIG_USBDEV_TRACE is enabled (or CONFIG_DEBUG and CONFIG_DEBUG_USB), then - the example code will also manage the USB trace output. The amount of trace output - can be controlled using: - - CONFIG_EXAMPLES_COMPOSITE_TRACEINIT - Show initialization events - CONFIG_EXAMPLES_COMPOSITE_TRACECLASS - Show class driver events - CONFIG_EXAMPLES_COMPOSITE_TRACETRANSFERS - Show data transfer events - CONFIG_EXAMPLES_COMPOSITE_TRACECONTROLLER - Show controller events - CONFIG_EXAMPLES_COMPOSITE_TRACEINTERRUPTS - Show interrupt-related events. - examples/cxxtest ^^^^^^^^^^^^^^^^ diff --git a/apps/examples/composite/.gitignore b/apps/examples/composite/.gitignore deleted file mode 100644 index fa1ec7579..000000000 --- a/apps/examples/composite/.gitignore +++ /dev/null @@ -1,11 +0,0 @@ -/Make.dep -/.depend -/.built -/*.asm -/*.obj -/*.rel -/*.lst -/*.sym -/*.adb -/*.lib -/*.src diff --git a/apps/examples/composite/Kconfig b/apps/examples/composite/Kconfig deleted file mode 100644 index 4d55d5548..000000000 --- a/apps/examples/composite/Kconfig +++ /dev/null @@ -1,64 +0,0 @@ -# -# For a description of the syntax of this configuration file, -# see misc/tools/kconfig-language.txt. -# - -config EXAMPLES_COMPOSITE - bool "USB composite class driver example" - default n - ---help--- - Enable the USB compsite class driver example - -if EXAMPLES_COMPOSITE -config EXAMPLES_COMPOSITE_TRACEINIT - bool "USB Trace Initialization" - default n - depends on USBDEV_TRACE || DEBUG_USB - ---help--- - If USBDEV_TRACE is enabled (or DEBUG and DEBUG_USB), - then the example code will also manage the USB trace output. The - amount of trace output can be controlled this configuration value: - This setting will show USB initialization events - -config EXAMPLES_COMPOSITE_TRACECLASS - bool "USB Trace Class" - default n - depends on USBDEV_TRACE || DEBUG_USB - ---help--- - If USBDEV_TRACE is enabled (or DEBUG and DEBUG_USB), - then the example code will also manage the USB trace output. The - amount of trace output can be controlled this configuration value: - This setting will show USB class driver events - -config EXAMPLES_COMPOSITE_TRACETRANSFERS - bool "USB Trace Transfers" - default n - depends on USBDEV_TRACE || DEBUG_USB - ---help--- - If USBDEV_TRACE is enabled (or DEBUG and DEBUG_USB), - then the example code will also manage the USB trace output. The - amount of trace output can be controlled this configuration value: - This setting will show USB data transfer events - -config EXAMPLES_COMPOSITE_TRACECONTROLLER - bool "USB Trace Device Controller Events" - default n - depends on USBDEV_TRACE || DEBUG_USB - ---help--- - If USBDEV_TRACE is enabled (or DEBUG and DEBUG_USB), - then the example code will also manage the USB trace output. The - amount of trace output can be controlled this configuration value: - This setting will show USB device controller events - -config EXAMPLES_COMPOSITE_TRACEINTERRUPTS - bool "USB Trace Device Controller Interrupt Events" - default n - depends on USBDEV_TRACE || DEBUG_USB - ---help--- - If USBDEV_TRACE is enabled (or DEBUG and DEBUG_USB), - then the example code will also manage the USB trace output. The - amount of trace output can be controlled this configuration value: - This setting will show USB device controller interrupt-related events. - -endif - diff --git a/apps/examples/composite/Makefile b/apps/examples/composite/Makefile deleted file mode 100644 index 1f05d9c64..000000000 --- a/apps/examples/composite/Makefile +++ /dev/null @@ -1,117 +0,0 @@ -############################################################################ -# apps/examples/composite/Makefile -# -# Copyright (C) 2012 Gregory Nutt. All rights reserved. -# Author: Gregory Nutt -# -# Redistribution and use in source and binary forms, with or without -# modification, are permitted provided that the following conditions -# are met: -# -# 1. Redistributions of source code must retain the above copyright -# notice, this list of conditions and the following disclaimer. -# 2. Redistributions in binary form must reproduce the above copyright -# notice, this list of conditions and the following disclaimer in -# the documentation and/or other materials provided with the -# distribution. -# 3. Neither the name NuttX nor the names of its contributors may be -# used to endorse or promote products derived from this software -# without specific prior written permission. -# -# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS -# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT -# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS -# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE -# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, -# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, -# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS -# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED -# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT -# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN -# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE -# POSSIBILITY OF SUCH DAMAGE. -# -############################################################################ - --include $(TOPDIR)/.config --include $(TOPDIR)/Make.defs -include $(APPDIR)/Make.defs - -# USB device mass storage example - -ASRCS = -CSRCS = composite_main.c - -AOBJS = $(ASRCS:.S=$(OBJEXT)) -COBJS = $(CSRCS:.c=$(OBJEXT)) - -SRCS = $(ASRCS) $(CSRCS) -OBJS = $(AOBJS) $(COBJS) - -ifeq ($(CONFIG_WINDOWS_NATIVE),y) - BIN = ..\..\libapps$(LIBEXT) -else -ifeq ($(WINTOOL),y) - BIN = ..\\..\\libapps$(LIBEXT) -else - BIN = ../../libapps$(LIBEXT) -endif -endif - -ROOTDEPPATH = --dep-path . - -# USB storage built-in application info - -APPNAME1 = conn -PRIORITY1 = SCHED_PRIORITY_DEFAULT -STACKSIZE1 = 2048 - -APPNAME2 = disconn -PRIORITY2 = SCHED_PRIORITY_DEFAULT -STACKSIZE2 = 2048 - -# Common build - -VPATH = - -all: .built -.PHONY: context clean depend distclean - -$(AOBJS): %$(OBJEXT): %.S - $(call ASSEMBLE, $<, $@) - -$(COBJS): %$(OBJEXT): %.c - $(call COMPILE, $<, $@) - -.built: $(OBJS) - $(call ARCHIVE, $(BIN), $(OBJS)) - @touch .built - -ifeq ($(CONFIG_NSH_BUILTIN_APPS),y) -$(BUILTIN_REGISTRY)$(DELIM)$(APPNAME1)_main.bdat: $(DEPCONFIG) Makefile - $(call REGISTER,$(APPNAME1),$(PRIORITY1),$(STACKSIZE1),$(APPNAME1)_main) - -$(BUILTIN_REGISTRY)$(DELIM)$(APPNAME2)_main.bdat: $(DEPCONFIG) Makefile - $(call REGISTER,$(APPNAME2),$(PRIORITY2),$(STACKSIZE2),$(APPNAME2)_main) - -context: $(BUILTIN_REGISTRY)$(DELIM)$(APPNAME1)_main.bdat $(BUILTIN_REGISTRY)$(DELIM)$(APPNAME2)_main.bdat -else -context: -endif - -.depend: Makefile $(SRCS) - @$(MKDEP) $(ROOTDEPPATH) "$(CC)" -- $(CFLAGS) -- $(SRCS) >Make.dep - @touch $@ - -depend: .depend - -clean: - $(call DELFILE, .built) - $(call CLEAN) - -distclean: clean - $(call DELFILE, Make.dep) - $(call DELFILE, .depend) - --include Make.dep - diff --git a/apps/examples/composite/composite.h b/apps/examples/composite/composite.h deleted file mode 100644 index 3f7f7ebad..000000000 --- a/apps/examples/composite/composite.h +++ /dev/null @@ -1,259 +0,0 @@ -/**************************************************************************** - * examples/composite/composite.h - * - * Copyright (C) 2012 Gregory Nutt. All rights reserved. - * Author: Gregory Nutt - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * 3. Neither the name NuttX nor the names of its contributors may be - * used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS - * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE - * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, - * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS - * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED - * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN - * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE - * POSSIBILITY OF SUCH DAMAGE. - * - ****************************************************************************/ - -#ifndef __EXAMPLES_COMPOSITE_COMPOSITE_H -#define __EXAMPLES_COMPOSITE_COMPOSITE_H - -/**************************************************************************** - * Included Files - ****************************************************************************/ - -#include -#include - -/**************************************************************************** - * Pre-Processor Definitions - ****************************************************************************/ -/* Configuration ************************************************************/ -/* OS/Driver configuration checkes */ - -#ifndef CONFIG_USBDEV -# error "USB device support is not enabled (CONFIG_USBDEV)" -#endif - -#ifndef CONFIG_USBDEV_COMPOSITE -# error "USB composite device support is not enabled (CONFIG_USBDEV_COMPOSITE)" -#endif - -#ifndef CONFIG_CDCACM -# error "USB CDC/ACM serial device support is not enabled (CONFIG_CDCACM)" -#endif - -#ifndef CONFIG_CDCACM_COMPOSITE -# error "USB CDC/ACM serial composite device support is not enabled (CONFIG_CDCACM_COMPOSITE)" -#endif - -#ifndef CONFIG_USBMSC -# error "USB mass storage device support is not enabled (CONFIG_USBMSC)" -#endif - -#ifndef CONFIG_USBMSC_COMPOSITE -# error "USB mass storage composite device support is not enabled (CONFIG_USBMSC_COMPOSITE)" -#endif - -/* Example MSC default values */ - -#ifndef CONFIG_EXAMPLES_COMPOSITE_NLUNS -# define CONFIG_EXAMPLES_COMPOSITE_NLUNS 1 -#endif - -#ifndef CONFIG_EXAMPLES_COMPOSITE_DEVMINOR1 -# define CONFIG_EXAMPLES_COMPOSITE_DEVMINOR1 0 -#endif - -#ifndef CONFIG_EXAMPLES_COMPOSITE_DEVPATH1 -# define CONFIG_EXAMPLES_COMPOSITE_DEVPATH1 "/dev/mmcsd0" -#endif - -#if CONFIG_EXAMPLES_COMPOSITE_NLUNS > 1 -# ifndef CONFIG_EXAMPLES_COMPOSITE_DEVMINOR2 -# error "CONFIG_EXAMPLES_COMPOSITE_DEVMINOR2 for LUN=2" -# endif -# ifndef CONFIG_EXAMPLES_COMPOSITE_DEVPATH2 -# error "CONFIG_EXAMPLES_COMPOSITE_DEVPATH2 for LUN=2" -# endif -# if CONFIG_EXAMPLES_COMPOSITE_NLUNS > 2 -# ifndef CONFIG_EXAMPLES_COMPOSITE_DEVMINOR3 -# error "CONFIG_EXAMPLES_COMPOSITE_DEVMINOR2 for LUN=3" -# endif -# ifndef CONFIG_EXAMPLES_COMPOSITE_DEVPATH2 -# error "CONFIG_EXAMPLES_COMPOSITE_DEVPATH2 for LUN=3" -# endif -# if CONFIG_EXAMPLES_COMPOSITE_NLUNS > 3 -# error "CONFIG_EXAMPLES_COMPOSITE_NLUNS must be {1,2,3}" -# endif -# endif -#endif - -#ifndef CONFIG_EXAMPLES_COMPOSITE_BUFLEN -# define CONFIG_EXAMPLES_COMPOSITE_BUFLEN 256 -#endif - -/* Example MSC default values */ - -#ifndef CONFIG_EXAMPLES_COMPOSITE_TTYUSB -# define CONFIG_EXAMPLES_COMPOSITE_TTYUSB 0 -#endif - -#ifndef CONFIG_EXAMPLES_COMPOSITE_SERDEV -# if CONFIG_EXAMPLES_COMPOSITE_TTYUSB != 0 -# error "Serial device unknown (CONFIG_EXAMPLES_COMPOSITE_SERDEV)" -# elif defined(CONFIG_CDCACM) -# define CONFIG_EXAMPLES_COMPOSITE_SERDEV "/dev/ttyACM0" -# else -# define CONFIG_EXAMPLES_COMPOSITE_SERDEV "/dev/ttyUSB0" -# endif -#endif - -#ifndef CONFIG_EXAMPLES_COMPOSITE_BUFSIZE -# define CONFIG_EXAMPLES_COMPOSITE_BUFSIZE 256 -#endif - -/* Trace initialization *****************************************************/ - -#ifdef CONFIG_EXAMPLES_COMPOSITE_TRACEINIT -# define TRACE_INIT_BITS (TRACE_INIT_BIT) -#else -# define TRACE_INIT_BITS (0) -#endif - -#define TRACE_ERROR_BITS (TRACE_DEVERROR_BIT|TRACE_CLSERROR_BIT) - -#ifdef CONFIG_EXAMPLES_COMPOSITE_TRACECLASS -# define TRACE_CLASS_BITS (TRACE_CLASS_BIT|TRACE_CLASSAPI_BIT|TRACE_CLASSSTATE_BIT) -#else -# define TRACE_CLASS_BITS (0) -#endif - -#ifdef CONFIG_EXAMPLES_COMPOSITE_TRACETRANSFERS -# define TRACE_TRANSFER_BITS (TRACE_OUTREQQUEUED_BIT|TRACE_INREQQUEUED_BIT|TRACE_READ_BIT|\ - TRACE_WRITE_BIT|TRACE_COMPLETE_BIT) -#else -# define TRACE_TRANSFER_BITS (0) -#endif - -#ifdef CONFIG_EXAMPLES_COMPOSITE_TRACECONTROLLER -# define TRACE_CONTROLLER_BITS (TRACE_EP_BIT|TRACE_DEV_BIT) -#else -# define TRACE_CONTROLLER_BITS (0) -#endif - -#ifdef CONFIG_EXAMPLES_COMPOSITE_TRACEINTERRUPTS -# define TRACE_INTERRUPT_BITS (TRACE_INTENTRY_BIT|TRACE_INTDECODE_BIT|TRACE_INTEXIT_BIT) -#else -# define TRACE_INTERRUPT_BITS (0) -#endif - -#define TRACE_BITSET (TRACE_INIT_BITS|TRACE_ERROR_BITS|TRACE_CLASS_BITS|\ - TRACE_TRANSFER_BITS|TRACE_CONTROLLER_BITS|TRACE_INTERRUPT_BITS) - -/* Debug ********************************************************************/ - -#ifdef CONFIG_CPP_HAVE_VARARGS -# ifdef CONFIG_DEBUG -# define message(...) lowsyslog(__VA_ARGS__) -# define msgflush() -# else -# define message(...) printf(__VA_ARGS__) -# define msgflush() fflush(stdout) -# endif -#else -# ifdef CONFIG_DEBUG -# define message lowsyslog -# define msgflush() -# else -# define message printf -# define msgflush() fflush(stdout) -# endif -#endif - -/**************************************************************************** - * Public Types - ****************************************************************************/ - -/* All global variables used by this example are packed into a structure in - * order to avoid name collisions. - */ - -struct composite_state_s -{ - /* This is the handle that references to this particular USB composite driver - * instance. It is only needed if the example is built using - * CONFIG_NSH_BUILTIN_APPS. In this case, the value of the driver handle - * must be remembered between the 'conn' and 'disconn' commands. - */ - - FAR void *cmphandle; /* Composite device handle */ - FAR void *mschandle; /* Mass storage device handle */ - - /* Serial file descriptors */ - -#if !defined(CONFIG_NSH_BUILTIN_APPS) || defined(CONFIG_DISABLE_SIGNALS) - int outfd; /* Blocking write-only */ - int infd; /* Non-blockig read-only */ -#endif - - /* Heap usage samples. These are useful for checking USB storage memory - * usage and for tracking down memoryh leaks. - */ - -#ifdef CONFIG_EXAMPLES_COMPOSITE_DEBUGMM - struct mallinfo mmstart; /* Memory usage before the connection */ - struct mallinfo mmprevious; /* The last memory usage sample */ - struct mallinfo mmcurrent; /* The current memory usage sample */ -#endif - - /* Serial I/O buffer */ - -#if !defined(CONFIG_NSH_BUILTIN_APPS) || defined(CONFIG_DISABLE_SIGNALS) - uint8_t serbuf[CONFIG_EXAMPLES_COMPOSITE_BUFSIZE]; -#endif -}; - -/**************************************************************************** - * Public Data - ****************************************************************************/ - -/* All global variables used by this example are packed into a structure in - * order to avoid name collisions. - */ - -extern struct composite_state_s g_composite; - -/**************************************************************************** - * Public Functions - ****************************************************************************/ - -/**************************************************************************** - * Name: composite_archinitialize - * - * Description: - * Perform architecture specific initialization. - * - ****************************************************************************/ - -extern int composite_archinitialize(void); - -#endif /* __EXAMPLES_COMPOSITE_COMPOSITE_H */ diff --git a/apps/examples/composite/composite_main.c b/apps/examples/composite/composite_main.c deleted file mode 100644 index 744c64096..000000000 --- a/apps/examples/composite/composite_main.c +++ /dev/null @@ -1,850 +0,0 @@ -/**************************************************************************** - * examples/composite/composite_main.c - * - * Copyright (C) 2012 Gregory Nutt. All rights reserved. - * Author: Gregory Nutt - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * 3. Neither the name NuttX nor the names of its contributors may be - * used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS - * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE - * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, - * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS - * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED - * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN - * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE - * POSSIBILITY OF SUCH DAMAGE. - * - ****************************************************************************/ - -/**************************************************************************** - * Included Files - ****************************************************************************/ - -#include - -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include -#include -#include - -#include "composite.h" - -/**************************************************************************** - * Definitions - ****************************************************************************/ - -/**************************************************************************** - * Private Data - ****************************************************************************/ - -/* All global variables used by this example are packed into a structure in - * order to avoid name collisions. - */ - -struct composite_state_s g_composite; - -/**************************************************************************** - * Private Functions - ****************************************************************************/ - -/**************************************************************************** - * Name: show_memory_usage - ****************************************************************************/ - -#ifdef CONFIG_EXAMPLES_COMPOSITE_DEBUGMM -static void show_memory_usage(struct mallinfo *mmbefore, - struct mallinfo *mmafter) -{ - int diff; - - message(" total used free largest\n"); - message("Before:%11d%11d%11d%11d\n", - mmbefore->arena, mmbefore->uordblks, mmbefore->fordblks, mmbefore->mxordblk); - message("After: %11d%11d%11d%11d\n", - mmafter->arena, mmafter->uordblks, mmafter->fordblks, mmafter->mxordblk); - - diff = mmbefore->uordblks - mmafter->uordblks; - if (diff < 0) - { - message("Change:%11d allocated\n", -diff); - } - else if (diff > 0) - { - message("Change:%11d freed\n", diff); - } -} -#else -# define show_memory_usage(mm1, mm2) -#endif - -/**************************************************************************** - * Name: check_test_memory_usage - ****************************************************************************/ - -#ifdef CONFIG_EXAMPLES_COMPOSITE_DEBUGMM -static void check_test_memory_usage(FAR const char *msg) -{ - /* Get the current memory usage */ - -#ifdef CONFIG_CAN_PASS_STRUCTS - g_composite.mmcurrent = mallinfo(); -#else - (void)mallinfo(&g_composite.mmcurrent); -#endif - - /* Show the change from the previous time */ - - message("\%s:\n", msg); - show_memory_usage(&g_composite.mmprevious, &g_composite.mmcurrent); - - /* Set up for the next test */ - -#ifdef CONFIG_CAN_PASS_STRUCTS - g_composite.mmprevious = g_composite.mmcurrent; -#else - memcpy(&g_composite.mmprevious, &g_composite.mmcurrent, sizeof(struct mallinfo)); -#endif -} -#else -# define check_test_memory_usage(msg) -#endif - -/**************************************************************************** - * Name: check_test_memory_usage - ****************************************************************************/ - -#ifdef CONFIG_EXAMPLES_COMPOSITE_DEBUGMM -static void final_memory_usage(FAR const char *msg) -{ - /* Get the current memory usage */ - -#ifdef CONFIG_CAN_PASS_STRUCTS - g_composite.mmcurrent = mallinfo(); -#else - (void)mallinfo(&g_composite.mmcurrent); -#endif - - /* Show the change from the previous time */ - - message("\n%s:\n", msg); - show_memory_usage(&g_composite.mmstart, &g_composite.mmcurrent); -} -#else -# define final_memory_usage(msg) -#endif - -/**************************************************************************** - * Name: composite_enumerate - ****************************************************************************/ - -#ifdef CONFIG_USBDEV_TRACE -static int composite_enumerate(struct usbtrace_s *trace, void *arg) -{ - switch (trace->event) - { - case TRACE_DEVINIT: - message("USB controller initialization: %04x\n", trace->value); - break; - - case TRACE_DEVUNINIT: - message("USB controller un-initialization: %04x\n", trace->value); - break; - - case TRACE_DEVREGISTER: - message("usbdev_register(): %04x\n", trace->value); - break; - - case TRACE_DEVUNREGISTER: - message("usbdev_unregister(): %04x\n", trace->value); - break; - - case TRACE_EPCONFIGURE: - message("Endpoint configure(): %04x\n", trace->value); - break; - - case TRACE_EPDISABLE: - message("Endpoint disable(): %04x\n", trace->value); - break; - - case TRACE_EPALLOCREQ: - message("Endpoint allocreq(): %04x\n", trace->value); - break; - - case TRACE_EPFREEREQ: - message("Endpoint freereq(): %04x\n", trace->value); - break; - - case TRACE_EPALLOCBUFFER: - message("Endpoint allocbuffer(): %04x\n", trace->value); - break; - - case TRACE_EPFREEBUFFER: - message("Endpoint freebuffer(): %04x\n", trace->value); - break; - - case TRACE_EPSUBMIT: - message("Endpoint submit(): %04x\n", trace->value); - break; - - case TRACE_EPCANCEL: - message("Endpoint cancel(): %04x\n", trace->value); - break; - - case TRACE_EPSTALL: - message("Endpoint stall(true): %04x\n", trace->value); - break; - - case TRACE_EPRESUME: - message("Endpoint stall(false): %04x\n", trace->value); - break; - - case TRACE_DEVALLOCEP: - message("Device allocep(): %04x\n", trace->value); - break; - - case TRACE_DEVFREEEP: - message("Device freeep(): %04x\n", trace->value); - break; - - case TRACE_DEVGETFRAME: - message("Device getframe(): %04x\n", trace->value); - break; - - case TRACE_DEVWAKEUP: - message("Device wakeup(): %04x\n", trace->value); - break; - - case TRACE_DEVSELFPOWERED: - message("Device selfpowered(): %04x\n", trace->value); - break; - - case TRACE_DEVPULLUP: - message("Device pullup(): %04x\n", trace->value); - break; - - case TRACE_CLASSBIND: - message("Class bind(): %04x\n", trace->value); - break; - - case TRACE_CLASSUNBIND: - message("Class unbind(): %04x\n", trace->value); - break; - - case TRACE_CLASSDISCONNECT: - message("Class disconnect(): %04x\n", trace->value); - break; - - case TRACE_CLASSSETUP: - message("Class setup(): %04x\n", trace->value); - break; - - case TRACE_CLASSSUSPEND: - message("Class suspend(): %04x\n", trace->value); - break; - - case TRACE_CLASSRESUME: - message("Class resume(): %04x\n", trace->value); - break; - - case TRACE_CLASSRDCOMPLETE: - message("Class RD request complete: %04x\n", trace->value); - break; - - case TRACE_CLASSWRCOMPLETE: - message("Class WR request complete: %04x\n", trace->value); - break; - - default: - switch (TRACE_ID(trace->event)) - { - case TRACE_CLASSAPI_ID: /* Other class driver system API calls */ - message("Class API call %d: %04x\n", TRACE_DATA(trace->event), trace->value); - break; - - case TRACE_CLASSSTATE_ID: /* Track class driver state changes */ - message("Class state %d: %04x\n", TRACE_DATA(trace->event), trace->value); - break; - - case TRACE_INTENTRY_ID: /* Interrupt handler entry */ - message("Interrrupt %d entry: %04x\n", TRACE_DATA(trace->event), trace->value); - break; - - case TRACE_INTDECODE_ID: /* Decoded interrupt trace->event */ - message("Interrrupt decode %d: %04x\n", TRACE_DATA(trace->event), trace->value); - break; - - case TRACE_INTEXIT_ID: /* Interrupt handler exit */ - message("Interrrupt %d exit: %04x\n", TRACE_DATA(trace->event), trace->value); - break; - - case TRACE_OUTREQQUEUED_ID: /* Request queued for OUT endpoint */ - message("EP%d OUT request queued: %04x\n", TRACE_DATA(trace->event), trace->value); - break; - - case TRACE_INREQQUEUED_ID: /* Request queued for IN endpoint */ - message("EP%d IN request queued: %04x\n", TRACE_DATA(trace->event), trace->value); - break; - - case TRACE_READ_ID: /* Read (OUT) action */ - message("EP%d OUT read: %04x\n", TRACE_DATA(trace->event), trace->value); - break; - - case TRACE_WRITE_ID: /* Write (IN) action */ - message("EP%d IN write: %04x\n", TRACE_DATA(trace->event), trace->value); - break; - - case TRACE_COMPLETE_ID: /* Request completed */ - message("EP%d request complete: %04x\n", TRACE_DATA(trace->event), trace->value); - break; - - case TRACE_DEVERROR_ID: /* USB controller driver error event */ - message("Controller error: %02x:%04x\n", TRACE_DATA(trace->event), trace->value); - break; - - case TRACE_CLSERROR_ID: /* USB class driver error event */ - message("Class error: %02x:%04x\n", TRACE_DATA(trace->event), trace->value); - break; - - default: - message("Unrecognized event: %02x:%02x:%04x\n", - TRACE_ID(trace->event) >> 8, TRACE_DATA(trace->event), trace->value); - break; - } - } - return OK; -} -#endif - -/**************************************************************************** - * Name: dumptrace - * - * Description: - * Dump collected trace data. - * - ****************************************************************************/ - -#ifdef CONFIG_USBDEV_TRACE -static int dumptrace(void) -{ - int ret; - - ret = usbtrace_enumerate(composite_enumerate, NULL); - if (ret < 0) - { - message("dumptrace: usbtrace_enumerate failed: %d\n", -ret); - } - return ret; -} -#else -# define dumptrace() (OK) -#endif - -/**************************************************************************** - * Name: open_serial - ****************************************************************************/ - -#if !defined(CONFIG_NSH_BUILTIN_APPS) && !defined(CONFIG_DISABLE_SIGNALS) -static int open_serial(void) -{ - int errcode; -#ifdef CONFIG_USBDEV_TRACE - int ret; -#endif - - /* Open the USB serial device for writing (blocking) */ - - do - { - message("open_serial: Opening USB serial driver\n"); - g_composite.outfd = open(CONFIG_EXAMPLES_COMPOSITE_SERDEV, O_WRONLY); - if (g_composite.outfd < 0) - { - errcode = errno; - message("open_serial: ERROR: Failed to open %s for writing: %d\n", - CONFIG_EXAMPLES_COMPOSITE_SERDEV, errcode); - - /* ENOTCONN means that the USB device is not yet connected */ - - if (errcode == ENOTCONN) - { - message("open_serial: Not connected. Wait and try again.\n"); - sleep(5); - } - else - { - /* Give up on other errors */ - - message("open_serial: Aborting\n"); - return -errcode; - } - } - - /* If USB tracing is enabled, then dump all collected trace data to - * stdout. - */ - -#ifdef CONFIG_USBDEV_TRACE - ret = dumptrace(); - if (ret < 0) - { - return ret; - } -#endif - } - while (g_composite.outfd < 0); - - /* Open the USB serial device for reading (non-blocking) */ - - g_composite.infd = open(CONFIG_EXAMPLES_COMPOSITE_SERDEV, O_RDONLY|O_NONBLOCK); - if (g_composite.infd < 0) - { - errcode = errno; - message("open_serial: ERROR: Failed to open%s for reading: %d\n", - CONFIG_EXAMPLES_COMPOSITE_SERDEV, errcode); - close(g_composite.outfd); - return -errcode; - } - - message("open_serial: Successfully opened the serial driver\n"); - return OK; -} -#endif - -/**************************************************************************** - * Name: echo_serial - ****************************************************************************/ - -static int echo_serial(void) -{ - ssize_t bytesread; - ssize_t byteswritten; - int errcode; - - /* Read data */ - - bytesread = read(g_composite.infd, g_composite.serbuf, CONFIG_EXAMPLES_COMPOSITE_BUFSIZE); - if (bytesread < 0) - { - errcode = errno; - if (errcode != EAGAIN) - { - message("echo_serial: ERROR: read failed: %d\n", errcode); - return -errcode; - } - return OK; - } - - /* Echo data */ - - byteswritten = write(g_composite.outfd, g_composite.serbuf, bytesread); - if (byteswritten < 0) - { - errcode = errno; - message("echo_serial: ERROR: write failed: %d\n", errcode); - return -errcode; - } - else if (byteswritten != bytesread) - { - message("echo_serial: ERROR: read size: %d write size: %d\n", - bytesread, byteswritten); - } - return OK; -} - -/**************************************************************************** - * Public Functions - ****************************************************************************/ - -/**************************************************************************** - * Name: board_mscclassobject - * - * Description: - * If the mass storage class driver is part of composite device, then - * its instantiation and configuration is a multi-step, board-specific, - * process (See comments for usbmsc_configure below). In this case, - * board-specific logic must provide board_mscclassobject(). - * - * board_mscclassobject() is called from the composite driver. It must - * encapsulate the instantiation and configuration of the mass storage - * class and the return the mass storage device's class driver instance - * to the composite dirver. - * - * Input Parameters: - * classdev - The location to return the mass storage class' device - * instance. - * - * Returned Value: - * 0 on success; a negated errno on failure - * - ****************************************************************************/ - -int board_mscclassobject(FAR struct usbdevclass_driver_s **classdev) -{ - int ret; - - DEBUGASSERT(g_composite.mschandle == NULL); - - /* Initialize USB trace output IDs */ - - usbtrace_enable(TRACE_BITSET); - check_test_memory_usage("After usbtrace_enable()"); - - /* Configure the mass storage device */ - - message("board_mscclassobject: Configuring with NLUNS=%d\n", CONFIG_EXAMPLES_COMPOSITE_NLUNS); - ret = usbmsc_configure(CONFIG_EXAMPLES_COMPOSITE_NLUNS, &g_composite.mschandle); - if (ret < 0) - { - message("board_mscclassobject: usbmsc_configure failed: %d\n", -ret); - return ret; - } - message("board_mscclassobject: MSC handle=%p\n", g_composite.mschandle); - check_test_memory_usage("After usbmsc_configure()"); - - /* Bind the LUN(s) */ - - message("board_mscclassobject: Bind LUN=0 to %s\n", CONFIG_EXAMPLES_COMPOSITE_DEVPATH1); - ret = usbmsc_bindlun(g_composite.mschandle, CONFIG_EXAMPLES_COMPOSITE_DEVPATH1, 0, 0, 0, false); - if (ret < 0) - { - message("board_mscclassobject: usbmsc_bindlun failed for LUN 1 using %s: %d\n", - CONFIG_EXAMPLES_COMPOSITE_DEVPATH1, -ret); - usbmsc_uninitialize(g_composite.mschandle); - return ret; - } - check_test_memory_usage("After usbmsc_bindlun()"); - -#if CONFIG_EXAMPLES_COMPOSITE_NLUNS > 1 - - message("board_mscclassobject: Bind LUN=1 to %s\n", CONFIG_EXAMPLES_COMPOSITE_DEVPATH2); - ret = usbmsc_bindlun(g_composite.mschandle, CONFIG_EXAMPLES_COMPOSITE_DEVPATH2, 1, 0, 0, false); - if (ret < 0) - { - message("board_mscclassobject: usbmsc_bindlun failed for LUN 2 using %s: %d\n", - CONFIG_EXAMPLES_COMPOSITE_DEVPATH2, -ret); - usbmsc_uninitialize(g_composite.mschandle); - return ret; - } - check_test_memory_usage("After usbmsc_bindlun() #2"); - -#if CONFIG_EXAMPLES_COMPOSITE_NLUNS > 2 - - message("board_mscclassobject: Bind LUN=2 to %s\n", CONFIG_EXAMPLES_COMPOSITE_DEVPATH3); - ret = usbmsc_bindlun(g_composite.mschandle, CONFIG_EXAMPLES_COMPOSITE_DEVPATH3, 2, 0, 0, false); - if (ret < 0) - { - message("board_mscclassobject: usbmsc_bindlun failed for LUN 3 using %s: %d\n", - CONFIG_EXAMPLES_COMPOSITE_DEVPATH3, -ret); - usbmsc_uninitialize(g_composite.mschandle); - return ret; - } - check_test_memory_usage("After usbmsc_bindlun() #3"); - -#endif -#endif - - /* Get the mass storage device's class object */ - - ret = usbmsc_classobject(g_composite.mschandle, classdev); - if (ret < 0) - { - message("board_mscclassobject: usbmsc_classobject failed: %d\n", -ret); - usbmsc_uninitialize(g_composite.mschandle); - } - check_test_memory_usage("After usbmsc_classobject()"); - return ret; -} - -/**************************************************************************** - * Name: board_mscuninitialize - * - * Description: - * Un-initialize the USB storage class driver. This is just an application- - * specific wrapper aboutn usbmsc_unitialize() that is called form the composite - * device logic. - * - * Input Parameters: - * classdev - The class driver instrance previously give to the composite - * driver by board_mscclassobject(). - * - * Returned Value: - * None - * - ****************************************************************************/ - -void board_mscuninitialize(FAR struct usbdevclass_driver_s *classdev) -{ - DEBUGASSERT(g_composite.mschandle != NULL); - usbmsc_uninitialize(g_composite.mschandle); -} - -/**************************************************************************** - * Name: board_cdcclassobject - * - * Description: - * If the CDC serial class driver is part of composite device, then - * board-specific logic must provide board_cdcclassobject(). In the simplest - * case, board_cdcclassobject() is simply a wrapper around cdcacm_classobject() - * that provides the correct device minor number. - * - * Input Parameters: - * classdev - The location to return the CDC serial class' device - * instance. - * - * Returned Value: - * 0 on success; a negated errno on failure - * - ****************************************************************************/ - -int board_cdcclassobject(FAR struct usbdevclass_driver_s **classdev) -{ - int ret; - - /* Initialize the USB serial driver */ - - message("board_cdcclassobject: Initializing USB serial driver\n"); - ret = cdcacm_classobject(CONFIG_EXAMPLES_COMPOSITE_TTYUSB, classdev); - if (ret < 0) - { - message("board_cdcclassobject: ERROR: Failed to create the USB serial device: %d\n", -ret); - } - return ret; -} - -/**************************************************************************** - * Name: board_cdcuninitialize - * - * Description: - * Un-initialize the USB serial class driver. This is just an application- - * specific wrapper aboutn cdcadm_unitialize() that is called form the composite - * device logic. - * - * Input Parameters: - * classdev - The class driver instrance previously give to the composite - * driver by board_cdcclassobject(). - * - * Returned Value: - * None - * - ****************************************************************************/ - -void board_cdcuninitialize(FAR struct usbdevclass_driver_s *classdev) -{ - DEBUGASSERT(classdev != NULL); - cdcacm_uninitialize(classdev); -} - -/**************************************************************************** - * conn_main - * - * Description: - * This is the main program that configures the USB mass storage device - * and exports the LUN(s). If CONFIG_NSH_BUILTIN_APPS is defined - * in the NuttX configuration, then this program can be executed by - * entering the "msconn" command at the NSH console. - * - ****************************************************************************/ - -int conn_main(int argc, char *argv[]) -{ - int ret; - - /* If this program is implemented as the NSH 'msconn' command, then we need to - * do a little error checking to assure that we are not being called re-entrantly. - */ - -#ifdef CONFIG_NSH_BUILTIN_APPS - - /* Check if there is a non-NULL USB mass storage device handle (meaning that the - * USB mass storage device is already configured). - */ - - if (g_composite.cmphandle) - { - message("conn_main: ERROR: Already connected\n"); - return 1; - } -#endif - -#ifdef CONFIG_EXAMPLES_COMPOSITE_DEBUGMM -# ifdef CONFIG_CAN_PASS_STRUCTS - g_composite.mmstart = mallinfo(); - g_composite.mmprevious = g_composite.mmstart; -# else - (void)mallinfo(&g_composite.mmstart); - memcpy(&g_composite.mmprevious, &g_composite.mmstart, sizeof(struct mallinfo)); -# endif -#endif - - /* Perform architecture-specific initialization */ - - message("conn_main: Performing architecture-specific intialization\n"); - ret = composite_archinitialize(); - if (ret < 0) - { - message("conn_main: composite_archinitialize failed: %d\n", -ret); - return 1; - } - check_test_memory_usage("After composite_archinitialize()"); - - /* Initialize the USB composite device device */ - - g_composite.cmphandle = composite_initialize(); - if (!g_composite.cmphandle) - { - message("conn_main: composite_initialize failed\n"); - return 1; - } - check_test_memory_usage("After composite_initialize()"); - -#if CONFIG_USBDEV_TRACE && CONFIG_USBDEV_TRACE_INITIALIDSET != 0 - /* If USB tracing is enabled and tracing of initial USB events is specified, - * then dump all collected trace data to stdout - */ - - sleep(5); - ret = dumptrace(); - if (ret < 0) - { - goto errout; - } -#endif - - /* It this program was configued as an NSH command, then just exit now. - * Also, if signals are not enabled (and, hence, sleep() is not supported. - * then we have not real option but to exit now. - */ - -#if !defined(CONFIG_NSH_BUILTIN_APPS) && !defined(CONFIG_DISABLE_SIGNALS) - - /* Otherwise, this thread will hang around and monitor the USB activity */ - - /* Open the serial driver */ - - ret = open_serial(); - if (ret < 0) - { - goto errout; - } - - /* Now looping */ - - for (;;) - { - /* Sleep for a bit */ - - msgflush(); - sleep(5); - - /* Echo any serial data */ - - ret = echo_serial(); - if (ret < 0) - { - goto errout; - } - - /* Dump trace data */ - -# ifdef CONFIG_USBDEV_TRACE - message("\n" "conn_main: USB TRACE DATA:\n"); - ret = dumptrace(); - if (ret < 0) - { - goto errout; - } - check_test_memory_usage("After usbtrace_enumerate()"); -# else - message("conn_main: Still alive\n"); -# endif - } -#else - - message("conn_main: Connected\n"); - check_test_memory_usage("After composite device connection"); -#endif - - /* Dump debug memory usage */ - - message("conn_main: Exiting\n"); -#if !defined(CONFIG_NSH_BUILTIN_APPS) && !defined(CONFIG_DISABLE_SIGNALS) - close(g_composite.infd); - close(g_composite.outfd); -#endif -#ifdef CONFIG_NSH_BUILTIN_APPS -#endif - final_memory_usage("Final memory usage"); - return 0; - -errout: -#if !defined(CONFIG_NSH_BUILTIN_APPS) && !defined(CONFIG_DISABLE_SIGNALS) - close(g_composite.infd); - close(g_composite.outfd); -#endif - composite_uninitialize(g_composite.cmphandle); - final_memory_usage("Final memory usage"); - return 1; -} - -/**************************************************************************** - * disconn_main - * - * Description: - * This is a program entry point that will disconnet the USB mass storage - * device. This program is only available if CONFIG_NSH_BUILTIN_APPS - * is defined in the NuttX configuration. In that case, this program can - * be executed by entering the "msdis" command at the NSH console. - * - ****************************************************************************/ - -#ifdef CONFIG_NSH_BUILTIN_APPS -int disconn_main(int argc, char *argv[]) -{ - /* First check if the USB mass storage device is already connected */ - - if (!g_composite.cmphandle) - { - message("disconn_main: ERROR: Not connected\n"); - return 1; - } - check_test_memory_usage("Since MS connection"); - - /* Then disconnect the device and uninitialize the USB mass storage driver */ - - composite_uninitialize(g_composite.cmphandle); - g_composite.mschandle = NULL; - message("disconn_main: Disconnected\n"); - check_test_memory_usage("After composite_uninitialize()"); - - /* Dump debug memory usage */ - - final_memory_usage("Final memory usage"); - return 0; -} -#endif -- cgit v1.2.3