From 1dc0e8b8c5b6e03fcfcdcbc89efd512f934eaca5 Mon Sep 17 00:00:00 2001 From: patacongo Date: Sat, 21 Jul 2012 13:35:35 +0000 Subject: Check-in of initial, unmodified freemodbus-v1.5.0 git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@4960 42af7a65-404d-4744-a932-0658087f49c3 --- apps/include/modbus/mb.h | 417 +++++++++++++++++++++++++++++++++++++++++ apps/include/modbus/mbconfig.h | 132 +++++++++++++ apps/include/modbus/mbframe.h | 87 +++++++++ apps/include/modbus/mbfunc.h | 80 ++++++++ apps/include/modbus/mbport.h | 129 +++++++++++++ apps/include/modbus/mbproto.h | 83 ++++++++ apps/include/modbus/mbutils.h | 108 +++++++++++ 7 files changed, 1036 insertions(+) create mode 100644 apps/include/modbus/mb.h create mode 100644 apps/include/modbus/mbconfig.h create mode 100644 apps/include/modbus/mbframe.h create mode 100644 apps/include/modbus/mbfunc.h create mode 100644 apps/include/modbus/mbport.h create mode 100644 apps/include/modbus/mbproto.h create mode 100644 apps/include/modbus/mbutils.h (limited to 'apps/include') diff --git a/apps/include/modbus/mb.h b/apps/include/modbus/mb.h new file mode 100644 index 000000000..8d6be7b42 --- /dev/null +++ b/apps/include/modbus/mb.h @@ -0,0 +1,417 @@ +/* + * FreeModbus Libary: A portable Modbus implementation for Modbus ASCII/RTU. + * Copyright (c) 2006 Christian Walter + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. The name of the author may not be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR + * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES + * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. + * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * File: $Id: mb.h,v 1.17 2006/12/07 22:10:34 wolti Exp $ + */ + +#ifndef _MB_H +#define _MB_H + +#include "port.h" + +#ifdef __cplusplus +PR_BEGIN_EXTERN_C +#endif + +#include "mbport.h" +#include "mbproto.h" + +/*! \defgroup modbus Modbus + * \code #include "mb.h" \endcode + * + * This module defines the interface for the application. It contains + * the basic functions and types required to use the Modbus protocol stack. + * A typical application will want to call eMBInit() first. If the device + * is ready to answer network requests it must then call eMBEnable() to activate + * the protocol stack. In the main loop the function eMBPoll() must be called + * periodically. The time interval between pooling depends on the configured + * Modbus timeout. If an RTOS is available a separate task should be created + * and the task should always call the function eMBPoll(). + * + * \code + * // Initialize protocol stack in RTU mode for a slave with address 10 = 0x0A + * eMBInit( MB_RTU, 0x0A, 38400, MB_PAR_EVEN ); + * // Enable the Modbus Protocol Stack. + * eMBEnable( ); + * for( ;; ) + * { + * // Call the main polling loop of the Modbus protocol stack. + * eMBPoll( ); + * ... + * } + * \endcode + */ + +/* ----------------------- Defines ------------------------------------------*/ + +/*! \ingroup modbus + * \brief Use the default Modbus TCP port (502) + */ +#define MB_TCP_PORT_USE_DEFAULT 0 + +/* ----------------------- Type definitions ---------------------------------*/ + +/*! \ingroup modbus + * \brief Modbus serial transmission modes (RTU/ASCII). + * + * Modbus serial supports two transmission modes. Either ASCII or RTU. RTU + * is faster but has more hardware requirements and requires a network with + * a low jitter. ASCII is slower and more reliable on slower links (E.g. modems) + */ + typedef enum +{ + MB_RTU, /*!< RTU transmission mode. */ + MB_ASCII, /*!< ASCII transmission mode. */ + MB_TCP /*!< TCP mode. */ +} eMBMode; + +/*! \ingroup modbus + * \brief If register should be written or read. + * + * This value is passed to the callback functions which support either + * reading or writing register values. Writing means that the application + * registers should be updated and reading means that the modbus protocol + * stack needs to know the current register values. + * + * \see eMBRegHoldingCB( ), eMBRegCoilsCB( ), eMBRegDiscreteCB( ) and + * eMBRegInputCB( ). + */ +typedef enum +{ + MB_REG_READ, /*!< Read register values and pass to protocol stack. */ + MB_REG_WRITE /*!< Update register values. */ +} eMBRegisterMode; + +/*! \ingroup modbus + * \brief Errorcodes used by all function in the protocol stack. + */ +typedef enum +{ + MB_ENOERR, /*!< no error. */ + MB_ENOREG, /*!< illegal register address. */ + MB_EINVAL, /*!< illegal argument. */ + MB_EPORTERR, /*!< porting layer error. */ + MB_ENORES, /*!< insufficient resources. */ + MB_EIO, /*!< I/O error. */ + MB_EILLSTATE, /*!< protocol stack in illegal state. */ + MB_ETIMEDOUT /*!< timeout error occurred. */ +} eMBErrorCode; + + +/* ----------------------- Function prototypes ------------------------------*/ +/*! \ingroup modbus + * \brief Initialize the Modbus protocol stack. + * + * This functions initializes the ASCII or RTU module and calls the + * init functions of the porting layer to prepare the hardware. Please + * note that the receiver is still disabled and no Modbus frames are + * processed until eMBEnable( ) has been called. + * + * \param eMode If ASCII or RTU mode should be used. + * \param ucSlaveAddress The slave address. Only frames sent to this + * address or to the broadcast address are processed. + * \param ucPort The port to use. E.g. 1 for COM1 on windows. This value + * is platform dependent and some ports simply choose to ignore it. + * \param ulBaudRate The baudrate. E.g. 19200. Supported baudrates depend + * on the porting layer. + * \param eParity Parity used for serial transmission. + * + * \return If no error occurs the function returns eMBErrorCode::MB_ENOERR. + * The protocol is then in the disabled state and ready for activation + * by calling eMBEnable( ). Otherwise one of the following error codes + * is returned: + * - eMBErrorCode::MB_EINVAL If the slave address was not valid. Valid + * slave addresses are in the range 1 - 247. + * - eMBErrorCode::MB_EPORTERR IF the porting layer returned an error. + */ +eMBErrorCode eMBInit( eMBMode eMode, UCHAR ucSlaveAddress, + UCHAR ucPort, ULONG ulBaudRate, eMBParity eParity ); + +/*! \ingroup modbus + * \brief Initialize the Modbus protocol stack for Modbus TCP. + * + * This function initializes the Modbus TCP Module. Please note that + * frame processing is still disabled until eMBEnable( ) is called. + * + * \param usTCPPort The TCP port to listen on. + * \return If the protocol stack has been initialized correctly the function + * returns eMBErrorCode::MB_ENOERR. Otherwise one of the following error + * codes is returned: + * - eMBErrorCode::MB_EINVAL If the slave address was not valid. Valid + * slave addresses are in the range 1 - 247. + * - eMBErrorCode::MB_EPORTERR IF the porting layer returned an error. + */ +eMBErrorCode eMBTCPInit( USHORT usTCPPort ); + +/*! \ingroup modbus + * \brief Release resources used by the protocol stack. + * + * This function disables the Modbus protocol stack and release all + * hardware resources. It must only be called when the protocol stack + * is disabled. + * + * \note Note all ports implement this function. A port which wants to + * get an callback must define the macro MB_PORT_HAS_CLOSE to 1. + * + * \return If the resources where released it return eMBErrorCode::MB_ENOERR. + * If the protocol stack is not in the disabled state it returns + * eMBErrorCode::MB_EILLSTATE. + */ +eMBErrorCode eMBClose( void ); + +/*! \ingroup modbus + * \brief Enable the Modbus protocol stack. + * + * This function enables processing of Modbus frames. Enabling the protocol + * stack is only possible if it is in the disabled state. + * + * \return If the protocol stack is now in the state enabled it returns + * eMBErrorCode::MB_ENOERR. If it was not in the disabled state it + * return eMBErrorCode::MB_EILLSTATE. + */ +eMBErrorCode eMBEnable( void ); + +/*! \ingroup modbus + * \brief Disable the Modbus protocol stack. + * + * This function disables processing of Modbus frames. + * + * \return If the protocol stack has been disabled it returns + * eMBErrorCode::MB_ENOERR. If it was not in the enabled state it returns + * eMBErrorCode::MB_EILLSTATE. + */ +eMBErrorCode eMBDisable( void ); + +/*! \ingroup modbus + * \brief The main pooling loop of the Modbus protocol stack. + * + * This function must be called periodically. The timer interval required + * is given by the application dependent Modbus slave timeout. Internally the + * function calls xMBPortEventGet() and waits for an event from the receiver or + * transmitter state machines. + * + * \return If the protocol stack is not in the enabled state the function + * returns eMBErrorCode::MB_EILLSTATE. Otherwise it returns + * eMBErrorCode::MB_ENOERR. + */ +eMBErrorCode eMBPoll( void ); + +/*! \ingroup modbus + * \brief Configure the slave id of the device. + * + * This function should be called when the Modbus function Report Slave ID + * is enabled ( By defining MB_FUNC_OTHER_REP_SLAVEID_ENABLED in mbconfig.h ). + * + * \param ucSlaveID Values is returned in the Slave ID byte of the + * Report Slave ID response. + * \param xIsRunning If TRUE the Run Indicator Status byte is set to 0xFF. + * otherwise the Run Indicator Status is 0x00. + * \param pucAdditional Values which should be returned in the Additional + * bytes of the Report Slave ID response. + * \param usAdditionalLen Length of the buffer pucAdditonal. + * + * \return If the static buffer defined by MB_FUNC_OTHER_REP_SLAVEID_BUF in + * mbconfig.h is to small it returns eMBErrorCode::MB_ENORES. Otherwise + * it returns eMBErrorCode::MB_ENOERR. + */ +eMBErrorCode eMBSetSlaveID( UCHAR ucSlaveID, BOOL xIsRunning, + UCHAR const *pucAdditional, + USHORT usAdditionalLen ); + +/*! \ingroup modbus + * \brief Registers a callback handler for a given function code. + * + * This function registers a new callback handler for a given function code. + * The callback handler supplied is responsible for interpreting the Modbus PDU and + * the creation of an appropriate response. In case of an error it should return + * one of the possible Modbus exceptions which results in a Modbus exception frame + * sent by the protocol stack. + * + * \param ucFunctionCode The Modbus function code for which this handler should + * be registers. Valid function codes are in the range 1 to 127. + * \param pxHandler The function handler which should be called in case + * such a frame is received. If \c NULL a previously registered function handler + * for this function code is removed. + * + * \return eMBErrorCode::MB_ENOERR if the handler has been installed. If no + * more resources are available it returns eMBErrorCode::MB_ENORES. In this + * case the values in mbconfig.h should be adjusted. If the argument was not + * valid it returns eMBErrorCode::MB_EINVAL. + */ +eMBErrorCode eMBRegisterCB( UCHAR ucFunctionCode, + pxMBFunctionHandler pxHandler ); + +/* ----------------------- Callback -----------------------------------------*/ + +/*! \defgroup modbus_registers Modbus Registers + * \code #include "mb.h" \endcode + * The protocol stack does not internally allocate any memory for the + * registers. This makes the protocol stack very small and also usable on + * low end targets. In addition the values don't have to be in the memory + * and could for example be stored in a flash.
+ * Whenever the protocol stack requires a value it calls one of the callback + * function with the register address and the number of registers to read + * as an argument. The application should then read the actual register values + * (for example the ADC voltage) and should store the result in the supplied + * buffer.
+ * If the protocol stack wants to update a register value because a write + * register function was received a buffer with the new register values is + * passed to the callback function. The function should then use these values + * to update the application register values. + */ + +/*! \ingroup modbus_registers + * \brief Callback function used if the value of a Input Register + * is required by the protocol stack. The starting register address is given + * by \c usAddress and the last register is given by usAddress + + * usNRegs - 1. + * + * \param pucRegBuffer A buffer where the callback function should write + * the current value of the modbus registers to. + * \param usAddress The starting address of the register. Input registers + * are in the range 1 - 65535. + * \param usNRegs Number of registers the callback function must supply. + * + * \return The function must return one of the following error codes: + * - eMBErrorCode::MB_ENOERR If no error occurred. In this case a normal + * Modbus response is sent. + * - eMBErrorCode::MB_ENOREG If the application can not supply values + * for registers within this range. In this case a + * ILLEGAL DATA ADDRESS exception frame is sent as a response. + * - eMBErrorCode::MB_ETIMEDOUT If the requested register block is + * currently not available and the application dependent response + * timeout would be violated. In this case a SLAVE DEVICE BUSY + * exception is sent as a response. + * - eMBErrorCode::MB_EIO If an unrecoverable error occurred. In this case + * a SLAVE DEVICE FAILURE exception is sent as a response. + */ +eMBErrorCode eMBRegInputCB( UCHAR * pucRegBuffer, USHORT usAddress, + USHORT usNRegs ); + +/*! \ingroup modbus_registers + * \brief Callback function used if a Holding Register value is + * read or written by the protocol stack. The starting register address + * is given by \c usAddress and the last register is given by + * usAddress + usNRegs - 1. + * + * \param pucRegBuffer If the application registers values should be updated the + * buffer points to the new registers values. If the protocol stack needs + * to now the current values the callback function should write them into + * this buffer. + * \param usAddress The starting address of the register. + * \param usNRegs Number of registers to read or write. + * \param eMode If eMBRegisterMode::MB_REG_WRITE the application register + * values should be updated from the values in the buffer. For example + * this would be the case when the Modbus master has issued an + * WRITE SINGLE REGISTER command. + * If the value eMBRegisterMode::MB_REG_READ the application should copy + * the current values into the buffer \c pucRegBuffer. + * + * \return The function must return one of the following error codes: + * - eMBErrorCode::MB_ENOERR If no error occurred. In this case a normal + * Modbus response is sent. + * - eMBErrorCode::MB_ENOREG If the application can not supply values + * for registers within this range. In this case a + * ILLEGAL DATA ADDRESS exception frame is sent as a response. + * - eMBErrorCode::MB_ETIMEDOUT If the requested register block is + * currently not available and the application dependent response + * timeout would be violated. In this case a SLAVE DEVICE BUSY + * exception is sent as a response. + * - eMBErrorCode::MB_EIO If an unrecoverable error occurred. In this case + * a SLAVE DEVICE FAILURE exception is sent as a response. + */ +eMBErrorCode eMBRegHoldingCB( UCHAR * pucRegBuffer, USHORT usAddress, + USHORT usNRegs, eMBRegisterMode eMode ); + +/*! \ingroup modbus_registers + * \brief Callback function used if a Coil Register value is + * read or written by the protocol stack. If you are going to use + * this function you might use the functions xMBUtilSetBits( ) and + * xMBUtilGetBits( ) for working with bitfields. + * + * \param pucRegBuffer The bits are packed in bytes where the first coil + * starting at address \c usAddress is stored in the LSB of the + * first byte in the buffer pucRegBuffer. + * If the buffer should be written by the callback function unused + * coil values (I.e. if not a multiple of eight coils is used) should be set + * to zero. + * \param usAddress The first coil number. + * \param usNCoils Number of coil values requested. + * \param eMode If eMBRegisterMode::MB_REG_WRITE the application values should + * be updated from the values supplied in the buffer \c pucRegBuffer. + * If eMBRegisterMode::MB_REG_READ the application should store the current + * values in the buffer \c pucRegBuffer. + * + * \return The function must return one of the following error codes: + * - eMBErrorCode::MB_ENOERR If no error occurred. In this case a normal + * Modbus response is sent. + * - eMBErrorCode::MB_ENOREG If the application does not map an coils + * within the requested address range. In this case a + * ILLEGAL DATA ADDRESS is sent as a response. + * - eMBErrorCode::MB_ETIMEDOUT If the requested register block is + * currently not available and the application dependent response + * timeout would be violated. In this case a SLAVE DEVICE BUSY + * exception is sent as a response. + * - eMBErrorCode::MB_EIO If an unrecoverable error occurred. In this case + * a SLAVE DEVICE FAILURE exception is sent as a response. + */ +eMBErrorCode eMBRegCoilsCB( UCHAR * pucRegBuffer, USHORT usAddress, + USHORT usNCoils, eMBRegisterMode eMode ); + +/*! \ingroup modbus_registers + * \brief Callback function used if a Input Discrete Register value is + * read by the protocol stack. + * + * If you are going to use his function you might use the functions + * xMBUtilSetBits( ) and xMBUtilGetBits( ) for working with bitfields. + * + * \param pucRegBuffer The buffer should be updated with the current + * coil values. The first discrete input starting at \c usAddress must be + * stored at the LSB of the first byte in the buffer. If the requested number + * is not a multiple of eight the remaining bits should be set to zero. + * \param usAddress The starting address of the first discrete input. + * \param usNDiscrete Number of discrete input values. + * \return The function must return one of the following error codes: + * - eMBErrorCode::MB_ENOERR If no error occurred. In this case a normal + * Modbus response is sent. + * - eMBErrorCode::MB_ENOREG If no such discrete inputs exists. + * In this case a ILLEGAL DATA ADDRESS exception frame is sent + * as a response. + * - eMBErrorCode::MB_ETIMEDOUT If the requested register block is + * currently not available and the application dependent response + * timeout would be violated. In this case a SLAVE DEVICE BUSY + * exception is sent as a response. + * - eMBErrorCode::MB_EIO If an unrecoverable error occurred. In this case + * a SLAVE DEVICE FAILURE exception is sent as a response. + */ +eMBErrorCode eMBRegDiscreteCB( UCHAR * pucRegBuffer, USHORT usAddress, + USHORT usNDiscrete ); + +#ifdef __cplusplus +PR_END_EXTERN_C +#endif +#endif diff --git a/apps/include/modbus/mbconfig.h b/apps/include/modbus/mbconfig.h new file mode 100644 index 000000000..21252ae58 --- /dev/null +++ b/apps/include/modbus/mbconfig.h @@ -0,0 +1,132 @@ +/* + * FreeModbus Libary: A portable Modbus implementation for Modbus ASCII/RTU. + * Copyright (c) 2006 Christian Walter + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. The name of the author may not be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR + * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES + * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. + * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * File: $Id: mbconfig.h,v 1.15 2010/06/06 13:54:40 wolti Exp $ + */ + +#ifndef _MB_CONFIG_H +#define _MB_CONFIG_H + +#ifdef __cplusplus +PR_BEGIN_EXTERN_C +#endif +/* ----------------------- Defines ------------------------------------------*/ +/*! \defgroup modbus_cfg Modbus Configuration + * + * Most modules in the protocol stack are completly optional and can be + * excluded. This is specially important if target resources are very small + * and program memory space should be saved.
+ * + * All of these settings are available in the file mbconfig.h + */ +/*! \addtogroup modbus_cfg + * @{ + */ +/*! \brief If Modbus ASCII support is enabled. */ +#define MB_ASCII_ENABLED ( 1 ) + +/*! \brief If Modbus RTU support is enabled. */ +#define MB_RTU_ENABLED ( 1 ) + +/*! \brief If Modbus TCP support is enabled. */ +#define MB_TCP_ENABLED ( 0 ) + +/*! \brief The character timeout value for Modbus ASCII. + * + * The character timeout value is not fixed for Modbus ASCII and is therefore + * a configuration option. It should be set to the maximum expected delay + * time of the network. + */ +#define MB_ASCII_TIMEOUT_SEC ( 1 ) + +/*! \brief Timeout to wait in ASCII prior to enabling transmitter. + * + * If defined the function calls vMBPortSerialDelay with the argument + * MB_ASCII_TIMEOUT_WAIT_BEFORE_SEND_MS to allow for a delay before + * the serial transmitter is enabled. This is required because some + * targets are so fast that there is no time between receiving and + * transmitting the frame. If the master is to slow with enabling its + * receiver then he will not receive the response correctly. + */ +#ifndef MB_ASCII_TIMEOUT_WAIT_BEFORE_SEND_MS +#define MB_ASCII_TIMEOUT_WAIT_BEFORE_SEND_MS ( 0 ) +#endif + +/*! \brief Maximum number of Modbus functions codes the protocol stack + * should support. + * + * The maximum number of supported Modbus functions must be greater than + * the sum of all enabled functions in this file and custom function + * handlers. If set to small adding more functions will fail. + */ +#define MB_FUNC_HANDLERS_MAX ( 16 ) + +/*! \brief Number of bytes which should be allocated for the Report Slave ID + * command. + * + * This number limits the maximum size of the additional segment in the + * report slave id function. See eMBSetSlaveID( ) for more information on + * how to set this value. It is only used if MB_FUNC_OTHER_REP_SLAVEID_ENABLED + * is set to 1. + */ +#define MB_FUNC_OTHER_REP_SLAVEID_BUF ( 32 ) + +/*! \brief If the Report Slave ID function should be enabled. */ +#define MB_FUNC_OTHER_REP_SLAVEID_ENABLED ( 1 ) + +/*! \brief If the Read Input Registers function should be enabled. */ +#define MB_FUNC_READ_INPUT_ENABLED ( 1 ) + +/*! \brief If the Read Holding Registers function should be enabled. */ +#define MB_FUNC_READ_HOLDING_ENABLED ( 1 ) + +/*! \brief If the Write Single Register function should be enabled. */ +#define MB_FUNC_WRITE_HOLDING_ENABLED ( 1 ) + +/*! \brief If the Write Multiple registers function should be enabled. */ +#define MB_FUNC_WRITE_MULTIPLE_HOLDING_ENABLED ( 1 ) + +/*! \brief If the Read Coils function should be enabled. */ +#define MB_FUNC_READ_COILS_ENABLED ( 1 ) + +/*! \brief If the Write Coils function should be enabled. */ +#define MB_FUNC_WRITE_COIL_ENABLED ( 1 ) + +/*! \brief If the Write Multiple Coils function should be enabled. */ +#define MB_FUNC_WRITE_MULTIPLE_COILS_ENABLED ( 1 ) + +/*! \brief If the Read Discrete Inputs function should be enabled. */ +#define MB_FUNC_READ_DISCRETE_INPUTS_ENABLED ( 1 ) + +/*! \brief If the Read/Write Multiple Registers function should be enabled. */ +#define MB_FUNC_READWRITE_HOLDING_ENABLED ( 1 ) + +/*! @} */ +#ifdef __cplusplus + PR_END_EXTERN_C +#endif +#endif diff --git a/apps/include/modbus/mbframe.h b/apps/include/modbus/mbframe.h new file mode 100644 index 000000000..99d59c613 --- /dev/null +++ b/apps/include/modbus/mbframe.h @@ -0,0 +1,87 @@ +/* + * FreeModbus Libary: A portable Modbus implementation for Modbus ASCII/RTU. + * Copyright (c) 2006 Christian Walter + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. The name of the author may not be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR + * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES + * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. + * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * File: $Id: mbframe.h,v 1.9 2006/12/07 22:10:34 wolti Exp $ + */ + +#ifndef _MB_FRAME_H +#define _MB_FRAME_H + +#ifdef __cplusplus +PR_BEGIN_EXTERN_C +#endif + +/*! + * Constants which defines the format of a modbus frame. The example is + * shown for a Modbus RTU/ASCII frame. Note that the Modbus PDU is not + * dependent on the underlying transport. + * + * + * <------------------------ MODBUS SERIAL LINE PDU (1) -------------------> + * <----------- MODBUS PDU (1') ----------------> + * +-----------+---------------+----------------------------+-------------+ + * | Address | Function Code | Data | CRC/LRC | + * +-----------+---------------+----------------------------+-------------+ + * | | | | + * (2) (3/2') (3') (4) + * + * (1) ... MB_SER_PDU_SIZE_MAX = 256 + * (2) ... MB_SER_PDU_ADDR_OFF = 0 + * (3) ... MB_SER_PDU_PDU_OFF = 1 + * (4) ... MB_SER_PDU_SIZE_CRC = 2 + * + * (1') ... MB_PDU_SIZE_MAX = 253 + * (2') ... MB_PDU_FUNC_OFF = 0 + * (3') ... MB_PDU_DATA_OFF = 1 + * + */ + +/* ----------------------- Defines ------------------------------------------*/ +#define MB_PDU_SIZE_MAX 253 /*!< Maximum size of a PDU. */ +#define MB_PDU_SIZE_MIN 1 /*!< Function Code */ +#define MB_PDU_FUNC_OFF 0 /*!< Offset of function code in PDU. */ +#define MB_PDU_DATA_OFF 1 /*!< Offset for response data in PDU. */ + +/* ----------------------- Prototypes 0-------------------------------------*/ +typedef void ( *pvMBFrameStart ) ( void ); + +typedef void ( *pvMBFrameStop ) ( void ); + +typedef eMBErrorCode( *peMBFrameReceive ) ( UCHAR * pucRcvAddress, + UCHAR ** pucFrame, + USHORT * pusLength ); + +typedef eMBErrorCode( *peMBFrameSend ) ( UCHAR slaveAddress, + const UCHAR * pucFrame, + USHORT usLength ); + +typedef void( *pvMBFrameClose ) ( void ); + +#ifdef __cplusplus +PR_END_EXTERN_C +#endif +#endif diff --git a/apps/include/modbus/mbfunc.h b/apps/include/modbus/mbfunc.h new file mode 100644 index 000000000..aea14f759 --- /dev/null +++ b/apps/include/modbus/mbfunc.h @@ -0,0 +1,80 @@ +/* + * FreeModbus Libary: A portable Modbus implementation for Modbus ASCII/RTU. + * Copyright (c) 2006 Christian Walter + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. The name of the author may not be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR + * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES + * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. + * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * File: $Id: mbfunc.h,v 1.12 2006/12/07 22:10:34 wolti Exp $ + */ + +#ifndef _MB_FUNC_H +#define _MB_FUNC_H + +#ifdef __cplusplus +PR_BEGIN_EXTERN_C +#endif +#if MB_FUNC_OTHER_REP_SLAVEID_BUF > 0 + eMBException eMBFuncReportSlaveID( UCHAR * pucFrame, USHORT * usLen ); +#endif + +#if MB_FUNC_READ_INPUT_ENABLED > 0 +eMBException eMBFuncReadInputRegister( UCHAR * pucFrame, USHORT * usLen ); +#endif + +#if MB_FUNC_READ_HOLDING_ENABLED > 0 +eMBException eMBFuncReadHoldingRegister( UCHAR * pucFrame, USHORT * usLen ); +#endif + +#if MB_FUNC_WRITE_HOLDING_ENABLED > 0 +eMBException eMBFuncWriteHoldingRegister( UCHAR * pucFrame, USHORT * usLen ); +#endif + +#if MB_FUNC_WRITE_MULTIPLE_HOLDING_ENABLED > 0 +eMBException eMBFuncWriteMultipleHoldingRegister( UCHAR * pucFrame, USHORT * usLen ); +#endif + +#if MB_FUNC_READ_COILS_ENABLED > 0 +eMBException eMBFuncReadCoils( UCHAR * pucFrame, USHORT * usLen ); +#endif + +#if MB_FUNC_WRITE_COIL_ENABLED > 0 +eMBException eMBFuncWriteCoil( UCHAR * pucFrame, USHORT * usLen ); +#endif + +#if MB_FUNC_WRITE_MULTIPLE_COILS_ENABLED > 0 +eMBException eMBFuncWriteMultipleCoils( UCHAR * pucFrame, USHORT * usLen ); +#endif + +#if MB_FUNC_READ_DISCRETE_INPUTS_ENABLED > 0 +eMBException eMBFuncReadDiscreteInputs( UCHAR * pucFrame, USHORT * usLen ); +#endif + +#if MB_FUNC_READWRITE_HOLDING_ENABLED > 0 +eMBException eMBFuncReadWriteMultipleHoldingRegister( UCHAR * pucFrame, USHORT * usLen ); +#endif + +#ifdef __cplusplus +PR_END_EXTERN_C +#endif +#endif diff --git a/apps/include/modbus/mbport.h b/apps/include/modbus/mbport.h new file mode 100644 index 000000000..4f25a9644 --- /dev/null +++ b/apps/include/modbus/mbport.h @@ -0,0 +1,129 @@ +/* + * FreeModbus Libary: A portable Modbus implementation for Modbus ASCII/RTU. + * Copyright (c) 2006 Christian Walter + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. The name of the author may not be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR + * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES + * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. + * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * File: $Id: mbport.h,v 1.19 2010/06/06 13:54:40 wolti Exp $ + */ + +#ifndef _MB_PORT_H +#define _MB_PORT_H + +#ifdef __cplusplus +PR_BEGIN_EXTERN_C +#endif + +/* ----------------------- Type definitions ---------------------------------*/ + +typedef enum +{ + EV_READY, /*!< Startup finished. */ + EV_FRAME_RECEIVED, /*!< Frame received. */ + EV_EXECUTE, /*!< Execute function. */ + EV_FRAME_SENT /*!< Frame sent. */ +} eMBEventType; + +/*! \ingroup modbus + * \brief Parity used for characters in serial mode. + * + * The parity which should be applied to the characters sent over the serial + * link. Please note that this values are actually passed to the porting + * layer and therefore not all parity modes might be available. + */ +typedef enum +{ + MB_PAR_NONE, /*!< No parity. */ + MB_PAR_ODD, /*!< Odd parity. */ + MB_PAR_EVEN /*!< Even parity. */ +} eMBParity; + +/* ----------------------- Supporting functions -----------------------------*/ +BOOL xMBPortEventInit( void ); + +BOOL xMBPortEventPost( eMBEventType eEvent ); + +BOOL xMBPortEventGet( /*@out@ */ eMBEventType * eEvent ); + +/* ----------------------- Serial port functions ----------------------------*/ + +BOOL xMBPortSerialInit( UCHAR ucPort, ULONG ulBaudRate, + UCHAR ucDataBits, eMBParity eParity ); + +void vMBPortClose( void ); + +void xMBPortSerialClose( void ); + +void vMBPortSerialEnable( BOOL xRxEnable, BOOL xTxEnable ); + +BOOL xMBPortSerialGetByte( CHAR * pucByte ); + +BOOL xMBPortSerialPutByte( CHAR ucByte ); + +/* ----------------------- Timers functions ---------------------------------*/ +BOOL xMBPortTimersInit( USHORT usTimeOut50us ); + +void xMBPortTimersClose( void ); + +void vMBPortTimersEnable( void ); + +void vMBPortTimersDisable( void ); + +void vMBPortTimersDelay( USHORT usTimeOutMS ); + +/* ----------------------- Callback for the protocol stack ------------------*/ + +/*! + * \brief Callback function for the porting layer when a new byte is + * available. + * + * Depending upon the mode this callback function is used by the RTU or + * ASCII transmission layers. In any case a call to xMBPortSerialGetByte() + * must immediately return a new character. + * + * \return TRUE if a event was posted to the queue because + * a new byte was received. The port implementation should wake up the + * tasks which are currently blocked on the eventqueue. + */ +extern BOOL( *pxMBFrameCBByteReceived ) ( void ); + +extern BOOL( *pxMBFrameCBTransmitterEmpty ) ( void ); + +extern BOOL( *pxMBPortCBTimerExpired ) ( void ); + +/* ----------------------- TCP port functions -------------------------------*/ +BOOL xMBTCPPortInit( USHORT usTCPPort ); + +void vMBTCPPortClose( void ); + +void vMBTCPPortDisable( void ); + +BOOL xMBTCPPortGetRequest( UCHAR **ppucMBTCPFrame, USHORT * usTCPLength ); + +BOOL xMBTCPPortSendResponse( const UCHAR *pucMBTCPFrame, USHORT usTCPLength ); + +#ifdef __cplusplus +PR_END_EXTERN_C +#endif +#endif diff --git a/apps/include/modbus/mbproto.h b/apps/include/modbus/mbproto.h new file mode 100644 index 000000000..786aaf403 --- /dev/null +++ b/apps/include/modbus/mbproto.h @@ -0,0 +1,83 @@ +/* + * FreeModbus Libary: A portable Modbus implementation for Modbus ASCII/RTU. + * Copyright (c) 2006 Christian Walter + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. The name of the author may not be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR + * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES + * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. + * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * File: $Id: mbproto.h,v 1.14 2006/12/07 22:10:34 wolti Exp $ + */ + +#ifndef _MB_PROTO_H +#define _MB_PROTO_H + +#ifdef __cplusplus +PR_BEGIN_EXTERN_C +#endif +/* ----------------------- Defines ------------------------------------------*/ +#define MB_ADDRESS_BROADCAST ( 0 ) /*! Modbus broadcast address. */ +#define MB_ADDRESS_MIN ( 1 ) /*! Smallest possible slave address. */ +#define MB_ADDRESS_MAX ( 247 ) /*! Biggest possible slave address. */ +#define MB_FUNC_NONE ( 0 ) +#define MB_FUNC_READ_COILS ( 1 ) +#define MB_FUNC_READ_DISCRETE_INPUTS ( 2 ) +#define MB_FUNC_WRITE_SINGLE_COIL ( 5 ) +#define MB_FUNC_WRITE_MULTIPLE_COILS ( 15 ) +#define MB_FUNC_READ_HOLDING_REGISTER ( 3 ) +#define MB_FUNC_READ_INPUT_REGISTER ( 4 ) +#define MB_FUNC_WRITE_REGISTER ( 6 ) +#define MB_FUNC_WRITE_MULTIPLE_REGISTERS ( 16 ) +#define MB_FUNC_READWRITE_MULTIPLE_REGISTERS ( 23 ) +#define MB_FUNC_DIAG_READ_EXCEPTION ( 7 ) +#define MB_FUNC_DIAG_DIAGNOSTIC ( 8 ) +#define MB_FUNC_DIAG_GET_COM_EVENT_CNT ( 11 ) +#define MB_FUNC_DIAG_GET_COM_EVENT_LOG ( 12 ) +#define MB_FUNC_OTHER_REPORT_SLAVEID ( 17 ) +#define MB_FUNC_ERROR ( 128 ) +/* ----------------------- Type definitions ---------------------------------*/ + typedef enum +{ + MB_EX_NONE = 0x00, + MB_EX_ILLEGAL_FUNCTION = 0x01, + MB_EX_ILLEGAL_DATA_ADDRESS = 0x02, + MB_EX_ILLEGAL_DATA_VALUE = 0x03, + MB_EX_SLAVE_DEVICE_FAILURE = 0x04, + MB_EX_ACKNOWLEDGE = 0x05, + MB_EX_SLAVE_BUSY = 0x06, + MB_EX_MEMORY_PARITY_ERROR = 0x08, + MB_EX_GATEWAY_PATH_FAILED = 0x0A, + MB_EX_GATEWAY_TGT_FAILED = 0x0B +} eMBException; + +typedef eMBException( *pxMBFunctionHandler ) ( UCHAR * pucFrame, USHORT * pusLength ); + +typedef struct +{ + UCHAR ucFunctionCode; + pxMBFunctionHandler pxHandler; +} xMBFunctionHandler; + +#ifdef __cplusplus +PR_END_EXTERN_C +#endif +#endif diff --git a/apps/include/modbus/mbutils.h b/apps/include/modbus/mbutils.h new file mode 100644 index 000000000..61495751d --- /dev/null +++ b/apps/include/modbus/mbutils.h @@ -0,0 +1,108 @@ +/* + * FreeModbus Libary: A portable Modbus implementation for Modbus ASCII/RTU. + * Copyright (c) 2006 Christian Walter + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. The name of the author may not be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR + * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES + * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. + * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * File: $Id: mbutils.h,v 1.5 2006/12/07 22:10:34 wolti Exp $ + */ + +#ifndef _MB_UTILS_H +#define _MB_UTILS_H + +#ifdef __cplusplus +PR_BEGIN_EXTERN_C +#endif +/*! \defgroup modbus_utils Utilities + * + * This module contains some utility functions which can be used by + * the application. It includes some special functions for working with + * bitfields backed by a character array buffer. + * + */ +/*! \addtogroup modbus_utils + * @{ + */ +/*! \brief Function to set bits in a byte buffer. + * + * This function allows the efficient use of an array to implement bitfields. + * The array used for storing the bits must always be a multiple of two + * bytes. Up to eight bits can be set or cleared in one operation. + * + * \param ucByteBuf A buffer where the bit values are stored. Must be a + * multiple of 2 bytes. No length checking is performed and if + * usBitOffset / 8 is greater than the size of the buffer memory contents + * is overwritten. + * \param usBitOffset The starting address of the bits to set. The first + * bit has the offset 0. + * \param ucNBits Number of bits to modify. The value must always be smaller + * than 8. + * \param ucValues Thew new values for the bits. The value for the first bit + * starting at usBitOffset is the LSB of the value + * ucValues + * + * \code + * ucBits[2] = {0, 0}; + * + * // Set bit 4 to 1 (read: set 1 bit starting at bit offset 4 to value 1) + * xMBUtilSetBits( ucBits, 4, 1, 1 ); + * + * // Set bit 7 to 1 and bit 8 to 0. + * xMBUtilSetBits( ucBits, 7, 2, 0x01 ); + * + * // Set bits 8 - 11 to 0x05 and bits 12 - 15 to 0x0A; + * xMBUtilSetBits( ucBits, 8, 8, 0x5A); + * \endcode + */ +void xMBUtilSetBits( UCHAR * ucByteBuf, USHORT usBitOffset, + UCHAR ucNBits, UCHAR ucValues ); + +/*! \brief Function to read bits in a byte buffer. + * + * This function is used to extract up bit values from an array. Up to eight + * bit values can be extracted in one step. + * + * \param ucByteBuf A buffer where the bit values are stored. + * \param usBitOffset The starting address of the bits to set. The first + * bit has the offset 0. + * \param ucNBits Number of bits to modify. The value must always be smaller + * than 8. + * + * \code + * UCHAR ucBits[2] = {0, 0}; + * UCHAR ucResult; + * + * // Extract the bits 3 - 10. + * ucResult = xMBUtilGetBits( ucBits, 3, 8 ); + * \endcode + */ +UCHAR xMBUtilGetBits( UCHAR * ucByteBuf, USHORT usBitOffset, + UCHAR ucNBits ); + +/*! @} */ + +#ifdef __cplusplus +PR_END_EXTERN_C +#endif +#endif -- cgit v1.2.3