/**************************************************************************** * examplex/ajoystick/ajoy_main.c * * Copyright (C) 2014 Gregory Nutt. All rights reserved. * Author: Gregory Nutt * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in * the documentation and/or other materials provided with the * distribution. * 3. Neither the name NuttX nor the names of its contributors may be * used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE * POSSIBILITY OF SUCH DAMAGE. * ****************************************************************************/ /**************************************************************************** * Included Files ****************************************************************************/ #include #include #include #include #include #include #include #include #include /**************************************************************************** * Pre-processor Definitions ****************************************************************************/ /* Configuration ************************************************************/ #ifndef CONFIG_AJOYSTICK # error "CONFIG_AJOYSTICK is not defined in the configuration" #endif #ifndef CONFIG_EXAMPLES_AJOYSTICK_DEVNAME # define CONFIG_EXAMPLES_AJOYSTICK_DEVNAME "/dev/ajoy0" #endif #ifndef CONFIG_EXAMPLES_AJOYSTICK_SIGNO # define CONFIG_EXAMPLES_AJOYSTICK_SIGNO 13 #endif #define FULL_RANGE 16 /* Helpers ******************************************************************/ #ifndef MIN # define MIN(a,b) (a < b ? a : b) #endif #ifndef MAX # define MAX(a,b) (a > b ? a : b) #endif /**************************************************************************** * Private Function Prototypes ****************************************************************************/ static void show_buttons(ajoy_buttonset_t oldset, ajoy_buttonset_t newset); static void show_joystick(FAR const struct ajoy_sample_s *sample); static int ajoy_wait(int fd, FAR const struct timespec *timeout); static int ajoy_read(int fd, FAR struct ajoy_sample_s *sample); static int ajoy_calibrate(int fd); /**************************************************************************** * Private Data ****************************************************************************/ /* The set of supported joystick buttons */ static ajoy_buttonset_t g_ajoysupported; /* Last sampled button set */ static ajoy_buttonset_t g_ajoylast; /* Calibration data */ static bool g_calibrated; static bool g_lispositive; static bool g_fispositive; static int16_t g_xcenter; static int16_t g_ycenter; static b16_t g_xlslope; static b16_t g_xrslope; static b16_t g_yfslope; static b16_t g_ybslope; /* Joystick button names */ static const char *g_ajoynames[AJOY_NBUTTONS] = { "SELECT", "FIRE", "JUMP", "BUTTON 4", "BUTTON 5", "BUTTON 6", "BUTTON 7", "BUTTON 8", }; /**************************************************************************** * Private Functions ****************************************************************************/ static void show_buttons(ajoy_buttonset_t oldset, ajoy_buttonset_t newset) { ajoy_buttonset_t chgset = oldset ^ newset; int i; if (chgset != 0) { /* Show each button state change */ for (i = 0; i <= AJOY_NBUTTONS; i++) { ajoy_buttonset_t mask = (1 << i); if ((chgset & mask) != 0) { FAR const char *state; /* Get the button state */ if ((newset & mask) != 0) { state = "selected"; } else { state = "released"; } printf(" %-6s: %s\n", g_ajoynames[i], state); } } } } /**************************************************************************** * Private Functions ****************************************************************************/ static void show_joystick(FAR const struct ajoy_sample_s *sample) { printf(" RAW: X=%d Y=%d\n", sample->as_x, sample->as_y); if (g_calibrated) { int tmp; int x; int y; tmp = sample->as_x - g_xcenter; if ((g_lispositive && tmp >= 0) || (!g_lispositive && tmp < 0)) { x = tmp * g_xlslope; } else { x = tmp * g_xrslope; } tmp = sample->as_y - g_ycenter; if ((g_fispositive && tmp >= 0) || (!g_fispositive && tmp < 0)) { y = tmp * g_yfslope; } else { y = tmp * g_ybslope; } printf(" Calibrated: X=%d Y=%d\n", x, y); } } static int ajoy_wait(int fd, FAR const struct timespec *timeout) { sigset_t sigset; struct siginfo value; ajoy_buttonset_t newset; int ret; /* Wait for a signal */ (void)sigemptyset(&sigset); (void)sigaddset(&sigset, CONFIG_EXAMPLES_AJOYSTICK_SIGNO); ret = sigtimedwait(&sigset, &value, timeout); if (ret < 0) { int errcode = errno; if (!timeout || errcode != EAGAIN) { fprintf(stderr, "ERROR: sigtimedwait() failed: %d\n", errcode); return -errcode; } /* Timeout is not an error */ printf("Timeout!\n"); return OK; } /* Show the set of joystick buttons accompanying the signal */ printf("Signalled button set\n"); newset = (ajoy_buttonset_t)value.si_value.sival_int; show_buttons(g_ajoylast, newset); g_ajoylast = newset; return OK; } static int ajoy_read(int fd, FAR struct ajoy_sample_s *sample) { ssize_t nread; /* Read the joystack sample */ nread = read(fd, sample, sizeof(struct ajoy_sample_s)); if (nread < 0) { int errcode = errno; fprintf(stderr, "ERROR: read() failed: %d\n", errcode); return -errcode; } else if (nread != sizeof(struct ajoy_sample_s)) { fprintf(stderr, "ERROR: read() unexpected size: %ld vs %d\n", (long)nread, sizeof(struct ajoy_sample_s)); return -EIO; } /* Show the joystick position and set buttons accompanying the signal */ /* Show the set of joystick buttons that we just read */ printf("Read position and button set\n"); show_joystick(sample); show_buttons(g_ajoylast, sample->as_buttons); g_ajoylast = sample->as_buttons; return OK; } static int ajoy_waitread(int fd, FAR const struct timespec *timeout, FAR struct ajoy_sample_s *sample) { int ret; /* Wait for a signal */ ret = ajoy_wait(fd, timeout); if (ret < 0) { fprintf(stderr, "ERROR: ajoy_wait() failed: %d\n", ret); return ret; } /* Read the joystick sample */ ret = ajoy_read(fd, sample); if (ret < 0) { fprintf(stderr, "ERROR: ajoy_read() failed: %d\n", ret); return ret; } return OK; } static b16_t ajoy_slope(int16_t value, int32_t full_range) { return itob16(full_range) / (int32_t)value; } static int ajoy_calibrate(int fd) { struct ajoy_sample_s sample; int ret; printf("Calibrating the joystick...\n"); /* Get the center position */ printf("Center the joystick and press any button\n"); ret = ajoy_waitread(fd, NULL, &sample); if (ret < 0) { fprintf(stderr, "ERROR: ajoy_waitread() failed: %d\n", errno); return ret; } g_xcenter = sample.as_x; g_ycenter = sample.as_y; /* Get the left/right calibration data */ printf("Move the joystick to the far RIGHT and press any button\n"); ret = ajoy_waitread(fd, NULL, &sample); if (ret < 0) { fprintf(stderr, "ERROR: ajoy_waitread() failed: %d\n", errno); return ret; } g_lispositive = (sample.as_x > g_xcenter); g_xlslope = ajoy_slope(sample.as_x - g_xcenter, FULL_RANGE); printf("Move the joystick to the far LEFT and press any button\n"); ret = ajoy_waitread(fd, NULL, &sample); if (ret < 0) { fprintf(stderr, "ERROR: ajoy_waitread() failed: %d\n", errno); return ret; } g_xrslope = ajoy_slope(sample.as_x - g_xcenter, -FULL_RANGE); /* Get the forward/backward calibration data */ printf("Move the joystick to the far FORWARD and press any button\n"); ret = ajoy_waitread(fd, NULL, &sample); if (ret < 0) { fprintf(stderr, "ERROR: ajoy_waitread() failed: %d\n", errno); return ret; } g_fispositive = (sample.as_y > g_ycenter); g_yfslope = ajoy_slope(sample.as_y - g_ycenter, FULL_RANGE); printf("Move the joystick to the far BACKWARD and press any button\n"); ret = ajoy_waitread(fd, NULL, &sample); if (ret < 0) { fprintf(stderr, "ERROR: ajoy_waitread() failed: %d\n", errno); return ret; } g_ybslope = ajoy_slope(sample.as_y - g_ycenter, -FULL_RANGE); printf("Calibrated:\n"); g_calibrated = true; printf(" X: center=%d, R-slope=%08lx L-slope=%08lx\n", g_xcenter, g_xrslope, g_xlslope); printf(" Y: center=%d, F-slope=%08lx B-slope=%08lx\n", g_ycenter, g_yfslope, g_ybslope); return OK; } /**************************************************************************** * Public Functions ****************************************************************************/ /**************************************************************************** * ajoy_main ****************************************************************************/ #ifdef CONFIG_BUILD_KERNEL int main(int argc, FAR char *argv[]) #else int ajoy_main(int argc, char *argv[]) #endif { struct timespec timeout; struct ajoy_notify_s notify; int fd; int tmp; int ret; int err = EXIT_FAILURE; /* Reset some globals that might been been left in a bad state */ g_ajoylast = 0; /* Open the ajoystick device */ fd = open(CONFIG_EXAMPLES_AJOYSTICK_DEVNAME, O_RDONLY); if (fd < 0) { fprintf(stderr, "ERROR: Failed to open %s: %d\n", CONFIG_EXAMPLES_AJOYSTICK_DEVNAME, errno); return EXIT_FAILURE; } /* Get the set of supported buttons */ ret = ioctl(fd, AJOYIOC_SUPPORTED, (unsigned long)((uintptr_t)&tmp)); if (ret < 0) { fprintf(stderr, "ERROR: ioctl(AJOYIOC_SUPPORTED) failed: %d\n", errno); goto errout_with_fd; } g_ajoysupported = (ajoy_buttonset_t)tmp; printf("Supported joystick buttons:\n"); show_buttons(0, g_ajoysupported); /* Register to receive a signal on any change in the joystick buttons. */ notify.an_press = g_ajoysupported; notify.an_release = g_ajoysupported; notify.an_signo = CONFIG_EXAMPLES_AJOYSTICK_SIGNO; ret = ioctl(fd, AJOYIOC_REGISTER, (unsigned long)((uintptr_t)¬ify)); if (ret < 0) { fprintf(stderr, "ERROR: ioctl(AJOYIOC_REGISTER) failed: %d\n", errno); goto errout_with_fd; } /* Calibrate the joystick */ ajoy_calibrate(fd); /* Then loop, receiving signals indicating joystick events. If this is an * NSH builtin application, we will turn as soon as the SELECT button is * depressed. */ timeout.tv_sec = 0; timeout.tv_nsec = 600*1000*1000; #ifdef CONFIG_NSH_BUILTIN_APPS while ((g_ajoylast & AJOY_BUTTON_SELECT_BIT) == 0) #else for (;;) #endif { struct ajoy_sample_s sample; /* Wait for a signal and read the sample */ ret = ajoy_waitread(fd, &timeout, &sample); if (ret < 0) { fprintf(stderr, "ERROR: ajoy_waitread() failed: %d\n", errno); goto errout_with_fd; } } err = EXIT_SUCCESS; errout_with_fd: close(fd); return err; }