/**************************************************************************** * examples/mtdpart/mtdpart_main.c * * Copyright (C) 2013 Gregory Nutt. All rights reserved. * Author: Gregory Nutt * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in * the documentation and/or other materials provided with the * distribution. * 3. Neither the name NuttX nor the names of its contributors may be * used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE * POSSIBILITY OF SUCH DAMAGE. * ****************************************************************************/ /**************************************************************************** * Included Files ****************************************************************************/ #include #include #include #include #include #include #include #include #include #include /**************************************************************************** * Definitions ****************************************************************************/ /* Configuration ************************************************************/ /* Make sure that support for MTD partitions is enabled */ #ifndef CONFIG_MTD_PARTITION # error "CONFIG_MTD_PARTITION is required" #endif /* The default is to use the RAM MTD device at drivers/mtd/rammtd.c. But * an architecture-specific MTD driver can be used instead by defining * CONFIG_EXAMPLES_MTDPART_ARCHINIT. In this case, the initialization logic * will call mtdpart_archinitialize() to obtain the MTD driver instance. */ #ifndef CONFIG_EXAMPLES_MTDPART_ARCHINIT /* Make sure that the RAM MTD driver is enabled */ # ifndef CONFIG_RAMMTD # error "CONFIG_RAMMTD is required without CONFIG_EXAMPLES_MTDPART_ARCHINIT" # endif /* This must exactly match the default configuration in drivers/mtd/rammtd.c */ # ifndef CONFIG_RAMMTD_ERASESIZE # define CONFIG_RAMMTD_ERASESIZE 4096 # endif /* Given the ERASESIZE, CONFIG_EXAMPLES_MTDPART_NEBLOCKS will determine the * size of the RAM allocation needed. */ # ifndef CONFIG_EXAMPLES_MTDPART_NEBLOCKS # define CONFIG_EXAMPLES_MTDPART_NEBLOCKS (32) # endif # undef MTDPART_BUFSIZE # define MTDPART_BUFSIZE \ (CONFIG_RAMMTD_ERASESIZE * CONFIG_EXAMPLES_MTDPART_NEBLOCKS) #endif #ifdef CONFIG_EXAMPLES_MTDPART_NPARTITIONS # define CONFIG_EXAMPLES_MTDPART_NPARTITIONS 3 #endif /**************************************************************************** * Private Types ****************************************************************************/ struct mtdpart_filedesc_s { FAR char *name; bool deleted; size_t len; uint32_t crc; }; /**************************************************************************** * Private Data ****************************************************************************/ /* Pre-allocated simulated flash */ #ifndef CONFIG_EXAMPLES_MTDPART_ARCHINIT static uint8_t g_simflash[MTDPART_BUFSIZE]; #endif /**************************************************************************** * External Functions ****************************************************************************/ #ifdef CONFIG_EXAMPLES_MTDPART_ARCHINIT extern FAR struct mtd_dev_s *mtdpart_archinitialize(void); #endif /**************************************************************************** * Private Functions ****************************************************************************/ /**************************************************************************** * Public Functions ****************************************************************************/ /**************************************************************************** * Name: mtdpart_main ****************************************************************************/ #ifdef CONFIG_BUILD_KERNEL int main(int argc, FAR char *argv[]) #else int mtdpart_main(int argc, char *argv[]) #endif { FAR struct mtd_dev_s *master; FAR struct mtd_dev_s *part[CONFIG_EXAMPLES_MTDPART_NPARTITIONS]; FAR struct mtd_geometry_s geo; FAR uint32_t *buffer; char blockname[32]; char charname[32]; size_t partsize; ssize_t nbytes; off_t nblocks; off_t offset; off_t check; off_t sectoff; off_t seekpos; unsigned int blkpererase; int fd; int i; int j; int k; int ret; /* Create and initialize a RAM MTD FLASH driver instance */ #ifdef CONFIG_EXAMPLES_MTDPART_ARCHINIT master = mtdpart_archinitialize(); #else master = rammtd_initialize(g_simflash, MTDPART_BUFSIZE); #endif if (!master) { printf("ERROR: Failed to create RAM MTD instance\n"); fflush(stdout); exit(1); } /* Perform the IOCTL to erase the entire FLASH part */ ret = master->ioctl(master, MTDIOC_BULKERASE, 0); if (ret < 0) { printf("ERROR: MTDIOC_BULKERASE ioctl failed: %d\n", ret); } /* Initialize to provide an FTL block driver on the MTD FLASH interface. * * NOTE: We could just skip all of this FTL and BCH stuff. We could * instead just use the MTD drivers bwrite and bread to perform this * test. Creating the character drivers, however, makes this test more * interesting. */ ret = ftl_initialize(0, master); if (ret < 0) { printf("ERROR: ftl_initialize /dev/mtdblock0 failed: %d\n", ret); fflush(stdout); exit(2); } /* Now create a character device on the block device */ ret = bchdev_register("/dev/mtdblock0", "/dev/mtd0", false); if (ret < 0) { printf("ERROR: bchdev_register /dev/mtd0 failed: %d\n", ret); fflush(stdout); exit(3); } /* Get the geometry of the FLASH device */ ret = master->ioctl(master, MTDIOC_GEOMETRY, (unsigned long)((uintptr_t)&geo)); if (ret < 0) { fdbg("ERROR: mtd->ioctl failed: %d\n", ret); exit(3); } printf("Flash Geometry:\n"); printf(" blocksize: %lu\n", (unsigned long)geo.blocksize); printf(" erasesize: %lu\n", (unsigned long)geo.erasesize); printf(" neraseblocks: %lu\n", (unsigned long)geo.neraseblocks); /* Determine the size of each partition. Make each partition an even * multiple of the erase block size (perhaps not using some space at the * end of the FLASH). */ blkpererase = geo.erasesize / geo.blocksize; nblocks = (geo.neraseblocks / CONFIG_EXAMPLES_MTDPART_NPARTITIONS) * blkpererase; partsize = nblocks * geo.blocksize; printf(" No. partitions: %u\n", CONFIG_EXAMPLES_MTDPART_NPARTITIONS); printf(" Partition size: %lu Blocks (%lu bytes)\n", nblocks, partsize); /* Now create MTD FLASH partitions */ printf("Creating partitions\n"); for (offset = 0, i = 1; i <= CONFIG_EXAMPLES_MTDPART_NPARTITIONS; offset += nblocks, i++) { printf(" Partition %d. Block offset=%lu, size=%lu\n", i, (unsigned long)offset, (unsigned long)nblocks); /* Create the partition */ part[i] = mtd_partition(master, offset, nblocks); if (!part[i]) { printf("ERROR: mtd_partition failed. offset=%lu nblocks=%lu\n", (unsigned long)offset, (unsigned long)nblocks); fflush(stdout); exit(4); } /* Initialize to provide an FTL block driver on the MTD FLASH interface */ snprintf(blockname, 32, "/dev/mtdblock%d", i); snprintf(charname, 32, "/dev/mtd%d", i); ret = ftl_initialize(i, part[i]); if (ret < 0) { printf("ERROR: ftl_initialize %s failed: %d\n", blockname, ret); fflush(stdout); exit(5); } /* Now create a character device on the block device */ ret = bchdev_register(blockname, charname, false); if (ret < 0) { printf("ERROR: bchdev_register %s failed: %d\n", charname, ret); fflush(stdout); exit(6); } } /* Allocate a buffer */ buffer = (FAR uint32_t *)malloc(geo.blocksize); if (!buffer) { printf("ERROR: failed to allocate a sector buffer\n"); fflush(stdout); exit(7); } /* Open the master MTD FLASH character driver for writing */ fd = open("/dev/mtd0", O_WRONLY); if (fd < 0) { printf("ERROR: open /dev/mtd0 failed: %d\n", errno); fflush(stdout); exit(8); } /* Now write the offset into every block */ printf("Initializing media:\n"); offset = 0; for (i = 0; i < geo.neraseblocks; i++) { for (j = 0; j < blkpererase; j++) { /* Fill the block with the offset */ for (k = 0; k < geo.blocksize / sizeof(uint32_t); k++) { buffer[k] = offset; offset += 4; } /* And write it using the character driver */ nbytes = write(fd, buffer, geo.blocksize); if (nbytes < 0) { printf("ERROR: write to /dev/mtd0 failed: %d\n", errno); fflush(stdout); exit(9); } } } close(fd); /* Now read each partition */ printf("Checking partitions:\n"); for (offset = 0, i = 1; i <= CONFIG_EXAMPLES_MTDPART_NPARTITIONS; offset += partsize, i++) { printf(" Partition %d. Byte offset=%lu, size=%lu\n", i, (unsigned long)offset, (unsigned long)partsize); /* Open the master MTD partition character driver for writing */ snprintf(charname, 32, "/dev/mtd%d", i); fd = open(charname, O_RDWR); if (fd < 0) { printf("ERROR: open %s failed: %d\n", charname, errno); fflush(stdout); exit(10); } /* Now verify the offset in every block */ check = offset; sectoff = 0; for (j = 0; j < nblocks; j++) { #if 0 /* Too much */ printf(" block=%u offset=%lu\n", j, (unsigned long) check); #endif /* Seek to the next read position */ seekpos = lseek(fd, sectoff, SEEK_SET); if (seekpos != sectoff) { printf("ERROR: lseek to offset %ld failed: %d\n", (unsigned long)sectoff, errno); fflush(stdout); exit(11); } /* Read the next block into memory */ nbytes = read(fd, buffer, geo.blocksize); if (nbytes < 0) { printf("ERROR: read from %s failed: %d\n", charname, errno); fflush(stdout); exit(12); } else if (nbytes == 0) { printf("ERROR: Unexpected end-of file in %s\n", charname); fflush(stdout); exit(13); } else if (nbytes != geo.blocksize) { printf("ERROR: Unexpected read size from %s: %ld\n", charname, (unsigned long)nbytes); fflush(stdout); exit(14); } /* Since we forced the size of the partition to be an even number * of erase blocks, we do not expect to encounter the end of file * indication. */ else if (nbytes == 0) { printf("ERROR: Unexpected end of file on %s\n", charname); fflush(stdout); exit(15); } /* This is not expected at all */ else if (nbytes != geo.blocksize) { printf("ERROR: Short read from %s failed: %lu\n", charname, (unsigned long)nbytes); fflush(stdout); exit(16); } /* Verfy the offsets in the block */ for (k = 0; k < geo.blocksize / sizeof(uint32_t); k++) { if (buffer[k] != check) { printf("ERROR: Bad offset %lu, expected %lu\n", (long)buffer[k], (long)check); fflush(stdout); exit(17); } /* Invert the value to indicate that we have verified * this value. */ buffer[k] = ~check; check += sizeof(uint32_t); } /* Seek to the next write position */ seekpos = lseek(fd, sectoff, SEEK_SET); if (seekpos != sectoff) { printf("ERROR: lseek to offset %ld failed: %d\n", (unsigned long)sectoff, errno); fflush(stdout); exit(18); } /* Now write the block back to FLASH with the modified value */ nbytes = write(fd, buffer, geo.blocksize); if (nbytes < 0) { printf("ERROR: write to %s failed: %d\n", charname, errno); fflush(stdout); exit(19); } else if (nbytes != geo.blocksize) { printf("ERROR: Unexpected write size to %s: %ld\n", charname, (unsigned long)nbytes); fflush(stdout); exit(20); } /* Get the offset to the next block */ sectoff += geo.blocksize; } /* Try reading one more time. We should get the end of file */ nbytes = read(fd, buffer, geo.blocksize); if (nbytes != 0) { printf("ERROR: Expected end-of-file from %s failed: %d %d\n", charname, nbytes, errno); fflush(stdout); exit(22); } close(fd); } /* Now verify that all of the verifed blocks appear where we thing they * should on the device. */ printf("Verfying media:\n"); fd = open("/dev/mtd0", O_RDONLY); if (fd < 0) { printf("ERROR: open /dev/mtd0 failed: %d\n", errno); fflush(stdout); exit(23); } offset = 0; check = 0; for (i = 0; i < nblocks * CONFIG_EXAMPLES_MTDPART_NPARTITIONS; i++) { /* Read the next block into memory */ nbytes = read(fd, buffer, geo.blocksize); if (nbytes < 0) { printf("ERROR: read from %s failed: %d\n", charname, errno); fflush(stdout); exit(24); } else if (nbytes == 0) { printf("ERROR: Unexpected end-of file in %s\n", charname); fflush(stdout); exit(25); } else if (nbytes != geo.blocksize) { printf("ERROR: Unexpected read size from %s: %ld\n", charname, (unsigned long)nbytes); fflush(stdout); exit(26); } /* Verfy the values in the block */ for (k = 0; k < geo.blocksize / sizeof(uint32_t); k++) { if (buffer[k] != ~check) { printf("ERROR: Bad value %lu, expected %lu\n", (long)buffer[k], (long)(~check)); fflush(stdout); exit(27); } check += sizeof(uint32_t); } } close(fd); /* And exit without bothering to clean up */ printf("PASS: Everything looks good\n"); fflush(stdout); return 0; }