apps/interpreters README file ============================= This apps/ directory is set aside to hold interpreters that may be incorporated into NuttX. ficl ---- This is DIY port of Ficl (the "Forth Inspired Command Language"). See http://ficl.sourceforge.net/. It is a "DIY" port because the Ficl source is not in that directory, only an environment and instructions that will let you build Ficl under NuttX. The rest is up to you. micropython ----------- This is a port of a build environment for Micro Python: https://micropython.org/ Configuration Options: CONFIG_INTERPRETERS_MICROPYTHON - Enables support for the Micro Python interpreter CONFIG_INTERPRETERS_MICROPYTHON_URL - URL where Micro Python can be downloaded. default "https://github.com/micropython/micropython/archive". There are more recent snapshots at https://micropython.org/download/ CONFIG_INTERPRETERS_MICROPYTHON_VERSION - Version number. Default "1.3.8" CONFIG_INTERPRETERS_MICROPYTHON_APPNAME - Executable name. Only needed if CONFIG_NSH_BUILTIN_APPS=y. Default: "micropython" CONFIG_INTERPRETERS_MICROPYTHON_STACKSIZE - Interpreter stack size. Only needed if CONFIG_NSH_BUILTIN_APPS=y. Default: 2048 CONFIG_INTERPRETERS_MICROPYTHON_PRIORITY - Interpreter priority. Only needed if CONFIG_NSH_BUILTIN_APPS=y. Default: 100 CONFIG_INTERPRETERS_MICROPYTHON_PROGNAME - Program name. Only needed if CONFIG_BUILD_KERNEL=y. Default: "micropython" NOTE that Micro Python is not included in this directory. Be default, it will be downloaded at build time from the github . You can avoid this download by pre-installing Micro Python. Before building, just download Micro Python from: https://micropython.org/download/ https://github.com/micropython/micropython/releases Or clone from the GIT repository at: https://github.com/micropython/ https://github.com/micropython/micropython The Micro Python should be provided as a tarbll name: apps/interpreters/micropython/v$(CONFIG_INTERPRETERS_MICROPYTHON_VERSION).tar.gz and the unpacked code should reside in directory at: apps/interpreters/micropython/micropython-$(CONFIG_INTERPRETERS_MICROPYTHON_VERSION) This port was contributed by Dave Marples using Micro Python circa 1.3.8. It may not be compatible with other versions. NOTES: 1. Micro Python will not build on Windows with a Windows native toolchain due to use of POSIX paths in the Micro Python build system. It should build correctly on Linux or under Cygwin with the NuttX buildroot tools. 2. Micro Python will not run correctly on a 64-bit target (such as the NuttX simulation on a 64-bit platfform). In that case it generates assertions like: OverflowError: long int not supported in this build This change to mpconfigport.h is a partial work-around but does not solve all issues: -#define MICROPY_LONGINT_IMPL (MICROPY_LONGINT_IMPL_MPZ) +#define MICROPY_LONGINT_IMPL (MICROPY_LONGINT_IMPL_LONGLONG) Someday it will probably be necessary to autogenerate the mpconfigport.h header file with the correct properties for the target system.\ 3. Can't fine alloca.h? With GCC compilers you may be able replace the inclusion of alloca.h in mkconfigport.h with: #define alloca(a) __builtin_alloca(a) 4. Micro Python needs the math library libm.a. The math library built into NuttX is sufficient and that can be included with CONFIG_LIBM=y. If you prefer a more highly tuned math library then refer to the discussion of math.h in the the top-level nuttx/README.txt file. Also refer to the discussions in the NuttX Yahoo! forum; people have found many creative way to link with the newlib math library, for example. 5. Micro Python is released under the MIT license which is license-compatible with the NuttX 3-clause BSD license. Here is the full text of the Micro Python LICENSE file as of 2015-01-14: The MIT License (MIT) Copyright (c) 2013, 2014 Damien P. George Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the "Software"), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions: The above copyright notice and this permission notice shall be included in all copies or substantial portions of the Software. THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. pcode ----- At present, only the NuttX Pascal add-on is supported. This NuttX add-on must be downloaded separately (or is available in an GIT snapshot in the misc/pascal directory). This Pascal add-on must be installed into the NuttX apps/ directory. After unpacking the Pascal add-on package, an installation script and README.txt instructions can be found at pascal/nuttx. INSTALL.sh -- The script that performs the operation. Usage: ./INSTALL.sh [-16|-32] If you are using this standard NuttX apps/ package, the correct location for the is apps/interpreters. That is where the examples and build logic will expect to find the pcode sub-directory. Example: ./INSTALL.sh -16 $PWD/../../../apps/interpreters After installation, the NuttX apps/interpresters directory will contain the following files pcode |-- Makefile |-- include | `-- Common header files |-- libboff | `-- Pascal object format (POFF) library `--insn |-- include | `-- model-specific header files `-- prun `-- model-specific source files pashello There is a simple Pascal example at apps/examples/pashello. This is the standard "Hello, World!" example written in Pascal and interpreted from Pascal P-Code at runtime. To use this example, place the following in your defonfig file: CONFIG_EXAMPLES_PASHELLO=y CONFIG_INTERPRETERS_PCODE=y prun This directory holds some simple, convenience functions to simplify and standardize the interaction with the P-Code library.