README ^^^^^^ o Installation o Configuring NuttX o Building NuttX o Documentation INSTALLATION ^^^^^^^^^^^^ Download and Unpack: Download and unpack the NuttX tarball. If you are reading this, then you have probably already done that. After unpacking, you will end up with a directory called nuttx-version (where version is the NuttX version number). You might want to rename that directory nuttx to match the various instructions in the documentation and some scripts in the source tree. That nuttx build directory should reside in a path that contains no spaces in the higher level directory names. For example, under Cygwin, your home directory might be formed from your first and last names like: "/home/First Last". That will cause strange errors when the make system tries to build. [Actually, that problem is probably not to difficult to fix. Some Makefiles probably just need some pathes within double quotes] A Note about Header Files: Some toolchains are built with header files extracted from a C-library distribution (such as newlib). For those toolchains, NuttX must be compiled without using the standard header files that are distributed with your toolchain. This prevents including conflicting, incompatible header files (such as stdio.h). Certain header files, such as setjmp.h and varargs.h, may still be needed from your toolchain, however. If that is the case, one solution is to copy those header file from your toolchain into the NuttX include directory. Also, if you prefer to use the stdint.h and stdbool.h header files from your toolchain, those could be copied into the include/ directory too. Using most other header files from your toolchain would probably cause errors. CONFIGURING NUTTX ^^^^^^^^^^^^^^^^^ "Canned" NuttX configuration files are retained in: configs// Where is the name of your development board and . Configuring NuttX requires only copying three files from the to the directly where you installed NuttX (TOPDIR): Copy configs///Make.def to ${TOPDIR}/Make.defs Make.defs describes the rules needed by you tool chain to compile and link code. You may need to modify this file to match the specific needs of your toolchain. Copy configs///setenv.sh to ${TOPDIR}/setenv.sh setenv.sh is an optional convenience file that I use to set the PATH variable to the toolchain binaries. You may chose to use setenv.sh or not. If you use it, then it may need to be modified to include the path to your toolchain binaries. Copy configs///defconfig to ${TOPDIR}/.config The defconfig file holds the actual build configuration. This file is included by all other make files to determine what is included in the build and what is not. This file is also used to generate a C configuration header at include/nuttx/config.h. General information about configuring NuttX can be found in: ${TOPDIR}/configs/README.txt ${TOPDIR}/configs//README.txt There is a configuration script in the tools/ directory that makes this easier. It is used as follows: cd ${TOPDIR}/tools ./configure.sh / BUILDING NUTTX ^^^^^^^^^^^^^^ NuttX builds in-place in the source tree. You do not need to create any special build directories. Assuming that your Make.defs is setup properly for your tool chain, the following steps are all that are required to build NuttX: cd ${TOPDIR} make At least one configuration (eagle100) requires additional command line arguments on the make command. Read ${TOPDIR}/configs//README.txt to see if that applies to your target. DOCUMENTATION ^^^^^^^^^^^^^ Additional information can be found in the Documentation/ directory and also in README files that are scattered throughout the source tree. The documentation is in HTML and can be access by loading the following file into your Web browser: Documentation/index.html NuttX documentation is also available online at http://www.nuttx.org. Below is a guide to the available README files in the NuttX source tree: | |- arch/ | | | |- arm | | `- src | | `- lpc214x/README.txt | |- sh/ | | |- include/ | | | |-m16c/README.txt | | | |-sh1/README.txt | | | `-README.txt | | |- src/ | | | |-common/README.txt | | | |-m16c/README.txt | | | |-sh1/README.txt | | | `-README.txt | `- z80/ | | `- src/ | | `- z80/README.txt | `- README.txt |- configs/ | |- c5471evm/ | | |- include/README.txt | | |- src/README.txt | | `- README.txt | |- demo0s12ne64/ | | `- README.txt | |- ea3131/ | | `- README.txt | |- eagle100/ | | |- include/README.txt | | |- src/README.txt | | `- README.txt | |- ez80f910200kitg/ | | |- ostest/README.txt | | `- README.txt | |- ez80f910200zco/ | | |- dhcpd/README.txt | | |- httpd/README.txt | | |- nettest/README.txt | | |- nsh/README.txt | | |- ostest/README.txt | | |- poll/README.txt | | `- README.txt | |- m68332evb/ | | |- include/README.txt | | `- src/README.txt | |- mcu123-lpc214x/ | | |- include/README.txt | | |- src/README.txt | | `- README.txt | |- mx1ads/ | | |- include/README.txt | | |- src/README.txt | | `- README.txt | |- ntosd-dm320/ | | |- doc/README.txt | | |- include/README.txt | | |- src/README.txt | | `- README.txt | |- olimex-strp711/ | | |- include/README.txt | | |- src/README.txt | | `- README.txt | |- pjrc-8051/ | | |- include/README.txt | | |- src/README.txt | | `- README.txt | |- sim/ | | |- include/README.txt | | |- src/README.txt | | `- README.txt | |- skp16c26/ | | |- include/README.txt | | |- src/README.txt | | `- README.txt | |- stm3210e-eval/ | | |- include/README.txt | | |- RIDE/README.txt | | |- src/README.txt | | `- README.txt | |- us7032evb1/ | | |- bin/README.txt | | |- include/README.txt | | |- src/README.txt | | `- README.txt | |- xtrs/ | | |- include/README.txt | | |- src/README.txt | | `- README.txt | |- z16f2800100zcog/ | | |- ostest/README.txt | | |- pashello/README.txt | | `- README.txt | |- z80sim/ | | |- include/README.txt | | |- src/README.txt | | `- README.txt | |- z8encore000zco/ | | |- ostest/README.txt | | `- README.txt | |- z8f64200100kit/ | | |- ostest/README.txt | | `- README.txt | `- README.txt |- drivers/ | `- README.txt |- examples/ | |- nsh/README.txt | |- pashello/README.txt | `- README.txt |- graphics/ | `- README.txt |- libxx/ | `- README.txt `- netutils/ |- telnetd/README.txt `- README