#
# For a description of the syntax of this configuration file,
# see misc/tools/kconfig-language.txt.
#

if ARCH_ARM
comment "ARM Options"

choice
	prompt "ARM chip selection"
	default ARCH_CHIP_STM32

config ARCH_CHIP_C5471
	bool "TMS320 C5471"
	select ARCH_ARM7TDMI
	select ARCH_HAVE_LOWVECTORS
	---help---
		TI TMS320 C5471, A180, or DA180 (ARM7TDMI)

config ARCH_CHIP_CALYPSO
	bool "Calypso"
	select ARCH_ARM7TDMI
	select ARCH_HAVE_HEAP2
	select ARCH_HAVE_LOWVECTORS
	---help---
		TI Calypso-based cell phones (ARM7TDMI)

config ARCH_CHIP_DM320
	bool "TMS320 DM320"
	select ARCH_ARM926EJS
	select ARCH_HAVE_LOWVECTORS
	select ARCH_HAVE_MMU
	---help---
		TI DMS320 DM320 (ARM926EJS)

config ARCH_CHIP_IMX
	bool "Freescale iMX"
	select ARCH_ARM920T
	select ARCH_HAVE_HEAP2
	select ARCH_HAVE_LOWVECTORS
	select ARCH_HAVE_MMU
	---help---
		Freescale iMX architectures (ARM920T)

config ARCH_CHIP_KINETIS
	bool "Freescale Kinetis"
	select ARCH_CORTEXM4
	select ARCH_HAVE_MPU
	select ARCH_IRQPRIO
	---help---
		Freescale Kinetis Architectures (ARM Cortex-M4)

config ARCH_CHIP_LM
	bool "TI Stellaris"
	select ARCH_HAVE_MPU
	select ARCH_IRQPRIO
	---help---
		TI Stellaris LMS3 architecutres (ARM Cortex-M3)

config ARCH_CHIP_LPC17XX
	bool "NXP LPC17xx"
	select ARCH_CORTEXM3
	select ARCH_HAVE_MPU
	select ARCH_IRQPRIO
	---help---
		NXP LPC17xx architectures (ARM Cortex-M3)

config ARCH_CHIP_LPC214X
	bool "NXP LPC214x"
	select ARCH_ARM7TDMI
	select ARCH_HAVE_LOWVECTORS
	---help---
		NXP LPC2145x architectures (ARM7TDMI)

config ARCH_CHIP_LPC2378
	bool "NXP LPC2378"
	select ARCH_ARM7TDMI
	select ARCH_HAVE_LOWVECTORS
	---help---
		NXP LPC2145x architectures (ARM7TDMI)

config ARCH_CHIP_LPC31XX
	bool "NXP LPC31XX"
	select ARCH_ARM926EJS
	select ARCH_HAVE_LOWVECTORS
	select ARCH_HAVE_MMU
	---help---
		NPX LPC31XX architectures (ARM926EJS).

config ARCH_CHIP_LPC43XX
	bool "NXP LPC43XX"
	select ARCH_CORTEXM4
	select ARCH_HAVE_CMNVECTOR
	select ARMV7M_CMNVECTOR
	select ARCH_HAVE_MPU
	select ARCH_IRQPRIO
	---help---
		NPX LPC43XX architectures (ARM Cortex-M4).

config ARCH_CHIP_SAM3U
	bool "Atmel AT91SAM3U"
	select ARCH_CORTEXM3
	select ARCH_HAVE_MPU
	select ARCH_IRQPRIO
	---help---
		Atmel AT91SAM3U architectures (ARM Cortex-M3)

config ARCH_CHIP_STM32
	bool "STMicro STM32"
	select ARCH_HAVE_CMNVECTOR
	select ARCH_HAVE_MPU
	select ARCH_HAVE_I2CRESET
	select ARCH_IRQPRIO
	---help---
		STMicro STM32 architectures (ARM Cortex-M3/4).

config ARCH_CHIP_STR71X
	bool "STMicro STR71x"
	select ARCH_ARM7TDMI
	select ARCH_HAVE_LOWVECTORS
	---help---
		STMicro STR71x architectures (ARM7TDMI).

endchoice

config ARCH_ARM7TDMI
	bool

config ARCH_ARM926EJS
	bool

config ARCH_ARM920T
	bool

config ARCH_CORTEXM3
	bool

config ARCH_CORTEXM4
	bool

config ARCH_FAMILY
	string
	default "arm"		if ARCH_ARM7TDMI || ARCH_ARM926EJS || ARCH_ARM920T
	default "armv7-m"	if ARCH_CORTEXM3 || ARCH_CORTEXM4

config ARCH_CHIP
	string
	default "c5471"		if ARCH_CHIP_C5471
	default "calypso"	if ARCH_CHIP_CALYPSO
	default "dm320"		if ARCH_CHIP_DM320
	default "imx"		if ARCH_CHIP_IMX
	default "kinetis"	if ARCH_CHIP_KINETIS
	default "lm"		if ARCH_CHIP_LM
	default "lpc17xx"	if ARCH_CHIP_LPC17XX
	default "lpc214x"	if ARCH_CHIP_LPC214X
	default "lpc2378"	if ARCH_CHIP_LPC2378
	default "lpc31xx"	if ARCH_CHIP_LPC31XX
	default "lpc43xx"	if ARCH_CHIP_LPC43XX
	default "sam3u"		if ARCH_CHIP_SAM3U
	default "stm32"		if ARCH_CHIP_STM32
	default "str71x"	if ARCH_CHIP_STR71X

config ARCH_HAVE_CMNVECTOR
	bool

config ARMV7M_CMNVECTOR
	bool "Use common ARMv7-M vectors"
	default n
	depends on ARCH_HAVE_CMNVECTOR
	---help---
		Some architectures use their own, built-in vector logic.  Some use only
		the common vector logic.  Some can use either their own built-in vector
		logic or the common vector logic.  This applies only to ARMv7-M
		architectures.

config ARCH_FPU
	bool "FPU support"
	default y
	depends on ARCH_CORTEXM4
	---help---
		Build in support for the ARM Cortex-M4 Floating Point Unit (FPU).
		Check your chip specifications first; not all Cortex-M4 chips support the FPU.

config ARCH_HAVE_MPU
	bool

config ARMV7M_MPU
	bool "MPU support"
	default n
	depends on ARCH_HAVE_MPU
	---help---
		Build in support for the ARM Cortex-M3/4 Memory Protection Unit (MPU).
		Check your chip specifications first; not all Cortex-M3/4 chips support the MPU.

config ARCH_HAVE_LOWVECTORS
	bool

config ARCH_LOWVECTORS
	bool "Vectors in low memory"
	default n
	depends on ARCH_HAVE_LOWVECTORS
	---help---
		Support ARM vectors in low memory.

config ARCH_HAVE_MMU
	bool

config PGTABLE_VADDR
	hex "Page table virtual address"
	depends on ARCH_HAVE_MMU
	---help---
		Page table virtual address (might be defined in the board.h file).  Not
		applicable to all architectures.

config ARCH_ROMPGTABLE
	bool "ROM page table"
	default n
	depends on ARCH_HAVE_MMU
	---help---
		Support a fixed memory mapping use a (read-only) page table in ROM/FLASH.

config PAGING
	bool "On-demand paging"
	default n
	depends on ARCH_HAVE_MMU && !ARCH_ROMPGTABLE
	---help---
		If set =y in your configation file, this setting will enable the on-demand
		paging feature as described in http://www.nuttx.org/NuttXDemandPaging.html.

config BOARD_LOOPSPERMSEC
	int "Delay loops per millisecond"
	default 5000
	---help---
		Delay loops nust be calibrated for correct operation.

config ARCH_CALIBRATION
	bool "Calibrate delay loop"
	default n
	---help---
		Enables some built in instrumentation that causes a 100 second delay
		during boot-up.  This 100 second delay serves no purpose other than it
		allows you to calibratre BOARD_LOOPSPERMSEC.  You simply use a stop
		watch to measure the 100 second delay then adjust BOARD_LOOPSPERMSEC until
		the delay actually is 100 seconds.

config DEBUG_HARDFAULT
	bool "Verbose Hard-Fault Debug"
	default n
	depends on DEBUG && (ARCH_CORTEXM3 || ARCH_CORTEXM4)
	---help---
		Enables verbose debug output when a hard fault is occurs.  This verbose
		output is sometimes helpful when debugging difficult hard fault problems,
		but may be more than you typcially want to see.

if ARCH_CORTEXM3 || ARCH_CORTEXM4
source arch/arm/src/armv7-m/Kconfig
endif
if ARCH_ARM7TDMI || ARCH_ARM926EJS
source arch/arm/src/arm/Kconfig
endif
if ARCH_CHIP_C5471
source arch/arm/src/c5471/Kconfig
endif
if ARCH_CHIP_CALYPSO
source arch/arm/src/calypso/Kconfig
endif
if ARCH_CHIP_DM320
source arch/arm/src/dm320/Kconfig
endif
if ARCH_CHIP_IMX
source arch/arm/src/imx/Kconfig
endif
if ARCH_CHIP_KINETIS
source arch/arm/src/kinetis/Kconfig
endif
if ARCH_CHIP_LM
source arch/arm/src/lm/Kconfig
endif
if ARCH_CHIP_LPC17XX
source arch/arm/src/lpc17xx/Kconfig
endif
if ARCH_CHIP_LPC214X
source arch/arm/src/lpc214x/Kconfig
endif
if ARCH_CHIP_LPC2378
source arch/arm/src/lpc2378/Kconfig
endif
if ARCH_CHIP_LPC31XX
source arch/arm/src/lpc31xx/Kconfig
endif
if ARCH_CHIP_LPC43XX
source arch/arm/src/lpc43xx/Kconfig
endif
if ARCH_CHIP_SAM3U
source arch/arm/src/sam3u/Kconfig
endif
if ARCH_CHIP_STM32
source arch/arm/src/stm32/Kconfig
endif
if ARCH_CHIP_STR71X
source arch/arm/src/str71x/Kconfig
endif

endif