/**************************************************************************** * c5471/chip.h * * Copyright (C) 2007 Gregory Nutt. All rights reserved. * Author: Gregory Nutt * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in * the documentation and/or other materials provided with the * distribution. * 3. Neither the name Gregory Nutt nor the names of its contributors may be * used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE * POSSIBILITY OF SUCH DAMAGE. * ****************************************************************************/ #ifndef __C5471_CHIP_H #define __C5471_CHIP_H /**************************************************************************** * Included Files ****************************************************************************/ /**************************************************************************** * Definitions ****************************************************************************/ #define EIM_RAM_START 0xffd00000 /* Ethernet Interface Module (EIM) ******************************************/ #define EIM_CTRL 0xffff0000 /* ESM control register */ #define EIM_STATUS 0xffff0004 /* ESM status register */ #define EIM_CPU_TXBA 0xffff0008 /* CPU TX descriptors base address */ #define EIM_CPU_RXBA 0xffff000c /* CPU RX descriptors base address */ #define EIM_BUFSIZE 0xffff0010 /* Packet buffer size register */ #define EIM_CPU_FILTER 0xffff0014 /* CPU filtering contol registers */ #define EIM_CPU_DAHI 0xffff0018 /* CPU destination address (HI) */ #define EIM_CPU_DALO 0xffff001c /* CPU destination address (LO) */ #define EIM_MFVHI 0xffff0020 /* Multicast filter valid (HI) */ #define EIM_MFVLO 0xffff0024 /* Multicast filter valid (LO) */ #define EIM_MFMHI 0xffff0028 /* Multicast filter mask (HI) */ #define EIM_MFMLO 0xffff002c /* Multicast filter mask (LO) */ #define EIM_RXTH 0xffff0030 /* RX threshold register */ #define EIM_CPU_RXREADY 0xffff0034 /* CPU RX ready register */ #define EIM_INTEN 0xffff0038 /* ESM interrupt enable register */ #define EIM_ENET0_TXDESC 0xffff0040 /* ENET0 TX Queue pointer */ #define EIM_ENET0_RXDESC 0xffff0044 /* ENET0 RX Queue pointer */ #define EIM_CPU_TXDESC 0xffff0050 /* CPU TX Queue pointer */ #define EIM_CPU_RXDESC 0xffff0054 /* CPU RX Queue pointer */ #define ENET0_MODE 0xffff0100 /* Mode register */ #define ENET0_BOFFSEED 0xffff0104 /* Backoff seed register */ #define ENET0_BCOUNT 0xffff0108 /* Backoff count register */ #define ENET0_FLWPAUSE 0xffff010c /* TX flow pause count register */ #define ENET0_FLWCONTROL 0xffff0110 /* Flow control register */ #define ENET0_VTYPE 0xffff0114 /* VTYPE tag register */ #define ENET0_SEISR 0xffff0118 /* System error int status register */ #define ENET0_TXBUFRDY 0xffff011c /* TX descripter buffer ready */ #define ENET0_TDBA 0xffff0120 /* TX descriptor base address */ #define ENET0_RDBA 0xffff0124 /* RX descriptor base address */ #define ENET0_PARHI 0xffff0128 /* Dest phys address match (HI) */ #define ENET0_PARLO 0xffff012c /* Dest phys address match (LO) */ #define ENET0_LARHI 0xffff0130 /* Log address hash filter (HI) */ #define ENET0_LARLO 0xffff0134 /* Log address hash filter (LO) */ #define ENET0_ADRMODE_EN 0xffff0138 /* Address mode enable register */ #define ENET0_DRP 0xffff013c /* Desc ring poll interval count */ /* UARTs ********************************************************************/ #define UART_IRDA_BASE 0xffff0800 #define UART_MODEM_BASE 0xffff1000 #define UARTn_IO_RANGE 0x00000800 /* Common UART Registers. Expressed as offsets from the BASE address */ #define UART_RHR_OFFS 0x00000000 /* Rcv Holding Register */ #define UART_THR_OFFS 0x00000004 /* Xmit Holding Register */ #define UART_FCR_OFFS 0x00000008 /* FIFO Control Register */ #define UART_RFCR_OFFS 0x00000008 /* Rcv FIFO Control Register */ #define UART_TFCR_OFFS 0x00000008 /* Xmit FIFO Control Register */ #define UART_SCR_OFFS 0x0000000c /* Status Control Register */ #define UART_LCR_OFFS 0x00000010 /* Line Control Register */ #define UART_LSR_OFFS 0x00000014 /* Line Status Register */ #define UART_SSR_OFFS 0x00000018 /* Supplementary Status Register */ #define UART_MCR_OFFS 0x0000001c /* Modem Control Register */ #define UART_MSR_OFFS 0x00000020 /* Modem Status Register */ #define UART_IER_OFFS 0x00000024 /* Interrupt Enable Register */ #define UART_ISR_OFFS 0x00000028 /* Interrupt Status Register */ #define UART_EFR_OFFS 0x0000002c /* Enhanced Feature Register */ #define UART_XON1_OFFS 0x00000030 /* XON1 Character Register */ #define UART_XON2_OFFS 0x00000034 /* XON2 Character Register */ #define UART_XOFF1_OFFS 0x00000038 /* XOFF1 Character Register */ #define UART_XOFF2_OFFS 0x0000003c /* XOFF2 Character Register */ #define UART_SPR_OFFS 0x00000040 /* Scratch-pad Register */ #define UART_DIV_115K_OFFS 0x00000044 /* Divisor for baud generation */ #define UART_DIV_BIT_RATE_OFFS 0x00000048 /* For baud rate generation */ #define UART_TCR_OFFS 0x0000004c /* Transmission Control Register */ #define UART_TLR_OFFS 0x00000050 /* Trigger Level Register */ #define UART_MDR_OFFS 0x00000054 /* Mode Definition Register */ /* Registers available only for the IrDA UART (absolute address). */ #define UART_IRDA_MDR1 0xffff0854 /* Mode Definition Register 1 */ #define UART_IRDA_MDR2 0xffff0858 /* Mode Definition Register 2 */ #define UART_IRDA_TXFLL 0xffff085c /* LS Xmit Frame Length Register */ #define UART_IRDA_TXFLH 0xffff0860 /* MS Xmit Frame Length Register */ #define UART_IRDA_RXFLL 0xffff0864 /* LS Rcvd Frame Length Register */ #define UART_IRDA_RXFLH 0xffff0868 /* MS Rcvd Frame Length Register */ #define UART_IRDA_SFLSR 0xffff086c /* Status FIFO Line Status Reg */ #define UART_IRDA_SFREGL 0xffff0870 /* LS Status FIFO Register */ #define UART_IRDA_SFREGH 0xffff0874 /* MS Status FIFO Register */ #define UART_IRDA_BLR 0xffff0878 /* Begin of File Length Register */ #define UART_IRDA_PULSE_WIDTH 0xffff087c /* Pulse Width Register */ #define UART_IRDA_ACREG 0xffff0880 /* Auxiliary Control Register */ #define UART_IRDA_PULSE_START 0xffff0884 /* Start time of pulse */ #define UART_IRDA_RX_W_PTR 0xffff0888 /* RX FIFO write pointer */ #define UART_IRDA_RX_R_PTR 0xffff088c /* RX FIFO read pointer */ #define UART_IRDA_TX_W_PTR 0xffff0890 /* TX FIFO write pointer */ #define UART_IRDA_TX_R_PTR 0xffff0894 /* TX FIFO read pointer */ #define UART_IRDA_STATUS_W_PTR 0xffff0898 /* Write pointer of status FIFO */ #define UART_IRDA_STATUS_R_PTR 0xffff089c /* Read pointer of status FIFO */ #define UART_IRDA_RESUME 0xffff08a0 /* Resume register */ #define UART_IRDA_MUX 0xffff08a4 /* Selects UART_IRDA output mux */ /* Registers available for the Modem UART (absolute addresses) */ #define UART_MODEM_MDR 0xffff1054 /* Mode Definition Register */ #define UART_MODEM_UASR 0xffff1058 /* UART Auto-baud Status Register */ #define UART_MODEM_RDPTR_URX 0xffff105c /* RX FIFO Read Pointer Register */ #define UART_MODEM_WRPTR_URX 0xffff1060 /* RX FIFO Write Pointer Register */ #define UART_MODEM_RDPTR_UTX 0xffff1064 /* TX FIFO Read Pointer Register */ #define UART_MODEM_WRPTR_UTX 0xffff1068 /* TX FIFO Write Pointer Register */ /* UART Settings ************************************************************/ /* Miscellaneous UART settings. */ #define UART_RX_FIFO_NOEMPTY 0x00000001 #define UART_SSR_TXFULL 0x00000001 #define UART_LSR_TREF 0x00000020 #define UART_XMIT_FIFO_SIZE 64 #define UART_IRDA_XMIT_FIFO_SIZE 64 /* UART_LCR Register */ /* Bits 31-7: Reserved */ #define UART_LCR_BOC 0x00000040 /* Bit 6: Break Control */ /* Bit 5: Parity Type 2 */ #define UART_LCR_PAREVEN 0x00000010 /* Bit 4: Parity Type 1 */ #define UART_LCR_PARODD 0x00000000 #define UART_LCR_PAREN 0x00000008 /* Bit 3: Paity Enable */ #define UART_LCR_PARDIS 0x00000000 #define UART_LCR_2STOP 0x00000004 /* Bit 2: Number of stop bits */ #define UART_LCR_1STOP 0x00000000 #define UART_LCR_5BITS 0x00000000 /* Bits 0-1: Word-length */ #define UART_LCR_6BITS 0x00000001 #define UART_LCR_7BITS 0x00000002 #define UART_LCR_8BITS 0x00000003 #define UART_FCR_FTL 0x00000000 #define UART_FCR_FIFO_EN 0x00000001 #define UART_FCR_TX_CLR 0x00000002 #define UART_FCR_RX_CLR 0x00000004 #define UART_IER_RECVINT 0x00000001 #define UART_IER_XMITINT 0x00000002 #define UART_IER_LINESTSINT 0x00000004 #define UART_IER_MODEMSTSINT 0x00000008 /* IrDA UART only */ #define UART_IER_XOFFINT 0x00000020 #define UART_IER_RTSINT 0x00000040 /* IrDA UART only */ #define UART_IER_CTSINT 0x00000080 /* IrDA UART only */ #define UART_IER_INTMASK 0x000000ff #define BAUD_115200 0x00000001 #define BAUD_57600 0x00000002 #define BAUD_38400 0x00000003 #define BAUD_19200 0x00000006 #define BAUD_9600 0x0000000C #define BAUD_4800 0x00000018 #define BAUD_2400 0x00000030 #define BAUD_1200 0x00000060 #define MDR_UART_MODE 0x00000000 /* Both IrDA and Modem UARTs */ #define MDR_SIR_MODE 0x00000001 /* IrDA UART only */ #define MDR_AUTOBAUDING_MODE 0x00000002 /* Modem UART only */ #define MDR_RESET_MODE 0x00000007 /* Both IrDA and Modem UARTs */ /* SPI **********************************************************************/ #define MAX_SPI 3 #define SPI_REGISTER_BASE 0xffff2000 /* GIO **********************************************************************/ #define MAX_GIO (35) #define GIO_REGISTER_BASE 0xffff2800 #define GPIO_IO 0xffff2800 /* Writeable when I/O is configured * as an output; reads value on I/O * pin when I/O is configured as an * input */ #define GPIO_CIO 0xffff2804 /* GPIO configuration register */ #define GPIO_IRQA 0xffff2808 /* In conjunction with GPIO_IRQB * determines the behavior when GPIO * pins configured as input IRQ */ #define GPIO_IRQB 0xffff280c /* Determines the behavior when GPIO * pins configured as input IRQ */ #define GPIO_DDIO 0xffff2810 /* Delta Detect Register * (detects changes in the I/O pins) */ #define GPIO_EN 0xffff2814 /* Selects register for muxed GPIOs */ #define KGIO_REGISTER_BASE 0xffff2900 #define KBGPIO_IO 0xffff2900 /* Keyboard I/O bits: Writeable * when KBGPIO is configured as an * output; reads value on I/O pin * when KBGPIO is configured as an * input */ #define KBGPIO_CIO 0xffff2904 /* KBGPIO configuration register */ #define KBGPIO_IRQA 0xffff2908 /* In conjunction with KBGPIO_IRQB * determines the behavior when * KBGPIO pins configured as input * IRQ */ #define KBGPIO_IRQB 0xffff290c /* In conjunction with KBGPIO_IRQA * determines the behavior when * KBGPIO pins configured as input * IRQ */ #define KBGPIO_DDIO 0xffff2910 /* Delta Detect Register (detects * changes in the KBGPIO pins) */ #define KBGPIO_EN 0xffff2914 /* Selects register for muxed * KBGPIOs */ /* Timers *******************************************************************/ #define C5471_TIMER0_CTRL 0xffff2a00 #define C5471_TIMER0_CNT 0xffff2a04 #define C5471_TIMER1_CTRL 0xffff2b00 #define C5471_TIMER1_CNT 0xffff2b04 #define C5471_TIMER2_CTRL 0xffff2c00 #define C5471_TIMER2_CNT 0xffff2c04 /* Interrupts */ #define HAVE_SRC_IRQ_BIN_REG 0 #define INT_FIRST_IO 0xffff2d00 #define INT_IO_RANGE 0x5C #define IT_REG 0xffff2d00 #define MASK_IT_REG 0xffff2d04 #define SRC_IRQ_REG 0xffff2d08 #define SRC_FIQ_REG 0xffff2d0c #define SRC_IRQ_BIN_REG 0xffff2d10 #define INT_CTRL_REG 0xffff2d18 #define ILR_IRQ0_REG 0xffff2d1C /* 0-Timer 0 */ #define ILR_IRQ1_REG 0xffff2d20 /* 1-Timer 1 */ #define ILR_IRQ2_REG 0xffff2d24 /* 2-Timer 2 */ #define ILR_IRQ3_REG 0xffff2d28 /* 3-GPIO0 */ #define ILR_IRQ4_REG 0xffff2d2c /* 4-Ethernet */ #define ILR_IRQ5_REG 0xffff2d30 /* 5-KBGPIO[7:0] */ #define ILR_IRQ6_REG 0xffff2d34 /* 6-Uart serial */ #define ILR_IRQ7_REG 0xffff2d38 /* 7-Uart IRDA */ #define ILR_IRQ8_REG 0xffff2d3c /* 8-KBGPIO[15:8] */ #define ILR_IRQ9_REG 0xffff2d40 /* 9-GPIO3 */ #define ILR_IRQ10_REG 0xffff2d44 /* 10-GPIO2 */ #define ILR_IRQ11_REG 0xffff2d48 /* 11-I2C */ #define ILR_IRQ12_REG 0xffff2d4c /* 12-GPIO1 */ #define ILR_IRQ13_REG 0xffff2d50 /* 13-SPI */ #define ILR_IRQ14_REG 0xffff2d54 /* 14-GPIO[19:4] */ #define ILR_IRQ15_REG 0xffff2d58 /* 15-API */ /* CLKM *********************************************************************/ #define CLKM 0xffff2f00 #define CLKM_CTL_RST 0xffff2f10 #define CLKM_RESET 0xffff2f18 #define CLKM_RESET_EIM 0x00000008 #define CLKM_EIM_CLK_STOP 0x00000010 #define CLKM_CTL_RST_LEAD_RESET 0x00000000 #define CLKM_CTL_RST_EXT_RESET 0x00000002 /* I2C **********************************************************************/ #define MAX_I2C 1 /* API **********************************************************************/ #define DSPRAM_BASE 0xffe00000 /* DSPRAM base address */ #define DSPRAM_END 0xffe03fff /* This is the API address range in the DSP address space. */ #define DSPMEM_DSP_START 0x2000 #define DSPMEM_DSP_END 0x3fff /* This is the API address range in the ARM address space. */ #define DSPMEM_ARM_START DSPRAM_BASE /* Defined in hardware.h */ #define DSPMEM_ARM_END DSPRAM_END /* DSPMEM_IN_RANGE is a generic macro to test is a value is within * a range of values. */ #define DSPMEM_IN_RANGE(addr, start, end) \ ((((__u32)(addr)) >= (start)) && (((__u32)(addr)) <= (end))) /* DSPMEM_ADDR_ALIGNED verifies that a potential DSP address is * properly word aligned. */ #define DSPMEM_ADDR_ALIGNED(addr, cpu) ((((__u32)(addr)) & 1) == 0) /* DSPMEM_DSP_ADDR checks if a DSP address lies in within the * DSP's API address range. */ #define DSPMEM_DSP_ADDR(addr, cpu) \ DSPMEM_IN_RANGE(addr, DSPMEM_DSP_START, DSPMEM_DSP_END) /* DSPMEM_ARM_ADDR checks if a ARM address lies in within the * ARM's API address range. */ #define DSPMEM_ARM_ADDR(addr) \ DSPMEM_IN_RANGE(addr, DSPMEM_ARM_START, DSPMEM_ARM_END) /* DSPMEM_DSP_TO_ARM maps a DSP API address into an ARM API address */ #define DSPMEM_DSP_TO_ARM(addr, cpu) \ ((((__u32)(addr) - DSPMEM_DSP_START) << 1) + DSPMEM_ARM_START) /* DSPMEM_ARM_TO_DSP maps an ARM API address into a DSP API address */ #define DSPMEM_ARM_TO_DSP(addr) \ ((((__u32)(addr) - DSPMEM_ARM_START) >> 1) + DSPMEM_DSP_START) /**************************************************************************** * Inline Functions ****************************************************************************/ /**************************************************************************** * Public Function Prototypes ****************************************************************************/ #endif /* __C5471_CHIP_H */