#
# For a description of the syntax of this configuration file,
# see misc/tools/kconfig-language.txt.
#

comment "Kinetis Configuration Options"

choice
	prompt "Kinetis Chip Selection"
	default ARCH_CHIP_MK60N512VMD100
	depends on ARCH_CHIP_KINETIS

config ARCH_CHIP_MK40N512VLQ100
	bool "MK40N512VLQ100"
	select ARCH_FAMILY_K40

config ARCH_CHIP_MK40N512VMD100
	bool "MK40N512VMD100"
	select ARCH_FAMILY_K40

config ARCH_CHIP_MK40X128VLQ100
	bool "MK40X128VLQ100"
	select ARCH_FAMILY_K40

config ARCH_CHIP_MK40X128VMD100
	bool "MK40X128VMD100"
	select ARCH_FAMILY_K40

config ARCH_CHIP_MK40X256VLQ100
	bool "MK40X256VLQ100"
	select ARCH_FAMILY_K40

config ARCH_CHIP_MK40X256VMD100
	bool "MK40X256VMD100"
	select ARCH_FAMILY_K40

config ARCH_CHIP_MK60N256VLQ100
	bool "MK60N256VLQ100"
	select ARCH_FAMILY_K60

config ARCH_CHIP_MK60N256VMD100
	bool "MK60N256VMD100"
	select ARCH_FAMILY_K60

config ARCH_CHIP_MK60N512VLQ100
	bool "MK60N512VLQ100"
	select ARCH_FAMILY_K60

config ARCH_CHIP_MK60N512VMD100
	bool "MK60N512VMD100"
	select ARCH_FAMILY_K60

config ARCH_CHIP_MK60X256VLQ100
	bool "MK60X256VLQ100"
	select ARCH_FAMILY_K60

config ARCH_CHIP_MK60X256VMD100
	bool "MK60X256VMD100"
	select ARCH_FAMILY_K60

endchoice

# Chip families

config ARCH_FAMILY_K40
	bool
	default n

config ARCH_FAMILY_K60
	bool
	default n

menu "Kinetis Peripheral Support"

config KINETIS_TRACE
	bool "Trace"
	default n
	---help---
		Enable trace clocking on power up.

config KINETIS_FLEXBUS
	bool "FlexBus"
	default n
	---help---
		Enable flexbus clocking on power up.

config KINETIS_UART0
	bool "UART0"
	default n
	select ARCH_HAVE_UART0
	---help---
		Support UART0

config KINETIS_UART1
	bool "UART1"
	default n
	select ARCH_HAVE_UART1
	---help---
		Support UART1

config KINETIS_UART2
	bool "UART2"
	default n
	select ARCH_HAVE_UART2
	---help---
		Support UART2

config KINETIS_UART3
	bool "UART3"
	default n
	select ARCH_HAVE_UART3
	---help---
		Support UART3

config KINETIS_UART4
	bool "UART4"
	default n
	select ARCH_HAVE_UART4
	---help---
		Support UART4

config KINETIS_UART5
	bool "UART5"
	default n
	select ARCH_HAVE_UART5
	---help---
		Support UART5

config KINETIS_ENET
	bool "Ethernet"
	default n
	depends on ARCH_FAMILY_K60
	select NET
	---help---
		Support Ethernet (K60 only)

config KINETIS_RNGB
	bool "Random number generator"
	default n
	depends on ARCH_FAMILY_K60
	---help---
		Support the random number generator(K60 only)

config KINETIS_FLEXCAN0
	bool "FlexCAN0"
	default n
	---help---
		Support FlexCAN0

config KINETIS_FLEXCAN1
	bool "FlexCAN1"
	default n
	---help---
		Support FlexCAN1

config KINETIS_SPI0
	bool "SPI0"
	default n
	---help---
		Support SPI0

config KINETIS_SPI1
	bool "SPI1"
	default n
	---help---
		Support SPI1

config KINETIS_SPI2
	bool "SPI2"
	default n
	---help---
		Support SPI2

config KINETIS_I2C0
	bool "I2C0"
	default n
	---help---
		Support I2C0

config KINETIS_I2C1
	bool "I2C1"
	default n
	---help---
		Support I2C1

config KINETIS_I2S
	bool "I2S"
	default n
	---help---
		Support I2S

config KINETIS_DAC0
	bool "DAC0"
	default n
	---help---
		Support DAC0

config KINETIS_DAC1
	bool "DAC1"
	default n
	---help---
		Support DAC1

config KINETIS_ADC0
	bool "ADC0"
	default n
	---help---
		Support ADC0

config KINETIS_ADC1
	bool "ADC1"
	default n
	---help---
		Support ADC1

config KINETIS_CMP
	bool "CMP"
	default n
	---help---
		Support CMP

config KINETIS_VREF
	bool "VREF"
	default n
	---help---
		Support VREF

config KINETIS_SDHC
	bool "SDHC"
	default n
	select ARCH_HAVE_SDIO
	---help---
		Support SD host controller

config KINETIS_FTM0
	bool "FTM0"
	default n
	---help---
		Support FlexTimer 0

config KINETIS_FTM1
	bool "FTM1"
	default n
	---help---
		Support FlexTimer 1

config KINETIS_FTM2
	bool "FTM2"
	default n
	---help---
		Support FlexTimer 2

config KINETIS_LPTIMER
	bool "Low power timer (LPTIMER)"
	default n
	---help---
		Support the low power timer

config KINETIS_RTC
	bool "RTC"
	default n
	---help---
		Support RTC

config KINETIS_SLCD
	bool "Segment LCD (SLCD)"
	default n
	depends on ARCH_FAMILY_K40
	---help---
		Support the segment LCD (K40 only)

config KINETIS_EWM
	bool "External watchdog (WVM)"
	default n
	---help---
		Support the external watchdog

config KINETIS_CMT
	bool "Carrier modulator transmitter (CMT)"
	default n
	---help---
		Support Carrier Modulator Transmitter

config KINETIS_USBOTG
	bool "USB OTG"
	default n
	---help---
		Support USB OTG (see also USBHOST and USBDEV)

config KINETIS_USBDCD
	bool "USB device controller"
	default n
	---help---
		Support the USB Device Charger Detection module

config KINETIS_LLWU
	bool "Low leakage wake-up unit (LLWU)"
	default n
	---help---
		Support the Low Leakage Wake-Up Unit

config KINETIS_TSI
	bool "Touchscreen interface (TSI)"
	default n
	---help---
		Support the touch screeen interface

config KINETIS_FTFL
	bool "FLASH (FTFL)"
	default n
	---help---
		Support FLASH

config KINETIS_DMA
	bool "DMA"
	default n
	---help---
		Support DMA

config KINETIS_CRC
	bool "CRC"
	default n
	---help---
		Support CRC

config KINETIS_PDB
	bool "Programmable delay block (PDB)"
	default n
	---help---
		Support the Programmable Delay Block

config KINETIS_PIT
	bool "Programmable interval timer (PIT)"
	default n
	---help---
		Support Programmable Interval Timers

endmenu

comment "Kinetis GPIO Interrupt Configuration"

config GPIO_IRQ
	bool "GPIO pin interrupts"
	---help---
		Enable support for interrupting GPIO pins

if GPIO_IRQ

config KINETIS_PORTAINTS
	bool "GPIOA interrupts"
	---help---
		Enable support for 32 interrupts from GPIO port A pins

config KINETIS_PORTBINTS
	bool "GPIOB interrupts"
	---help---
		Enable support for 32 interrupts from GPIO port B pins

config KINETIS_PORTCINTS
	bool "GPIOC interrupts"
	---help---
		Enable support for 32 interrupts from GPIO port C pins

config KINETIS_PORTDINTS
	bool "GPIOD interrupts"
	---help---
		Enable support for 32 interrupts from GPIO port D pins

config KINETIS_PORTEINTS
	bool "GPIOE interrupts"
	---help---
		Enable support for 32 interrupts from GPIO port E pins

endif

if KINETIS_ENET

comment "Kinetis Ethernet Configuration"

config ENET_ENHANCEDBD
	bool "Use enhanced buffer descriptors"
	default n
	---help---
		Use enhanced, 32-byte buffer descriptors

config ENET_NETHIFS
	int "Number of Ethernet interfaces"
	default 1
	---help---
		Number of Ethernet interfaces supported by the hardware.  Must be
		one for now.

config ENET_NRXBUFFERS
	int "Number of Ethernet Rx buffers"
	default 6
	---help---
		Number of Ethernet Rx buffers to use.  The size of one buffer is
		determined by NET_BUFSIZE

config ENET_NTXBUFFERS
	int "Number of Ethernet Tx buffers"
	default 2
	---help---
		Number of Ethernet Tx buffers to use. The size of one buffer is
		determined by NET_BUFSIZE

config ENET_PHYADDR
	int "PHY address"
	default 1
	---help---
		MII/RMII address of the PHY

config ENET_USEMII
	bool "Use MII interface"
	default n
	---help---
		The the MII PHY interface.  Default:  Use RMII interface

endif

if KINETIS_SDHC

comment "Kinetis SDHC Configuration"

config KINETIS_SDHC_ABSFREQ
	bool "Custom transfer frequencies"
	default n
	---help---
		Select SDCLK frequencies corresponding to various modes of operation.
		These values may be provided in either the NuttX configuration file
		or in the board.h file

		NOTE:  These settings are not currently used.  Since there are only
		four frequencies, it makes more sense to just "can" the fixed
		frequency prescaler and divider values.

if KINETIS_SDHC_ABSFREQ

config KINETIS_IDMODE_FREQ
	int "ID mode frequency"
	default 400000
	---help---
		Initial, ID mode SD frequency

config KINETIS_MMCXFR_FREQ
	int "MMC transfer frequency"
	default 20000000
	---help---
		Frequency to use for transferring data to/from an MMC card

config KINETIS_SD1BIT_FREQ
	int "SD 1-bit transfer frequency"
	default 20000000
	depends on SDIO_WIDTH_D1_ONLY
	---help---
		Frequency to use for transferring data to/from an SD card using on a single data liune.

config KINETIS_SD4BIT_FREQ
	int "SD 4-bit transfer frequency"
	default 20000000
	depends on !SDIO_WIDTH_D1_ONLY
	---help---
		Frequency to use for transferring data to/from an SD card using all four data lines.

endif

config KINETIS_SDHC_DMAPRIO
	int "SDHC DMA priority"
	depends on SDIO_DMA
	---help---
		SDHC DMA priority

endif

comment "Kinetis UART Configuration"

config KINETIS_UARTFIFOS
	bool "Enable UART0 FIFO"
	default n
	depends on KINETIS_UART0