#
# For a description of the syntax of this configuration file,
# see misc/tools/kconfig-language.txt.
#

comment "LPC2378 Configuration Options"

choice
	prompt "Memory Execution Mode"
	default LPC2378_DEFAULT_MODE

config LPC2378_EXTMEM_MODE
	bool "External Memory Mode"
	depends on EXPERIMENTAL # Not used
	---help---
		Code executes from external memory starting at address 0x8000:0000.

config LPC2378_RAM_MODE
	bool "RAM Memory Mode"
	depends on EXPERIMENTAL # Not used
	---help---
		Code executes from on-chip RAM at address 0x4000:0000.

config LPC2378_DEFAULT_MODE
	bool "Default Memory Mode"
	---help---
		Executes from 0x0000:0000.  In non-default modes, the MEMAP register
		is set override the settings of the CPU configuration pins.

endchoice

config LPC2378_CODE_BASE
	hex "Execution Base Address"
	default 0x00000000
	---help---
		This must match the expected address for the selected "Memory
		Execution Address":

		LPC2378_EXTMEM_MODE:  0x8000:0000
		LPC2378_RAM_MODE:     0x4000:0000
		LPC2378_DEFAULT_MODE: 0x0000:0000

config LPC2378_PLL_SETUP
	bool "Configure the PLL"
	default y

config LPC2378_PLL_CLKSRC
	int "PLL clock source"
	default 1
	range 0 2
	depends on LPC2378_PLL_SETUP
	---help---
		PLL clock source

config LPC2378_MAM_SETUP
	bool "Configure the Memory Accelerator Module (MAM)"
	default y

config LPC2378_LPC2378_MAMCR_VALUE
	int "Memory accelerator mode"
	default 1
	range 0 2
	---help---
		Memory accelerator mode:

		OFF		0
		PART	1
		FULL	2

config LPC2378_LPC2378_MAMTIM_VALUE
	int "Memory accelerator timing value"
	default 3
	---help---
		Memory accelerator timing value

config LPC2378_APBDIV_SETUP
	bool "Configure the APB Divider"
	default y
	depends on EXPERIMENTAL # Not used

config LPC2378_APBDIV_VALUE
	int "APB Divisor"
	default 1
	depends on EXPERIMENTAL # Not used

config LPC2378_EMC_SETUP
	bool "Configure EMC"
	default n
	depends on EXPERIMENTAL # Not used

config LPC2378_BCFG0_SETUP
	bool "Configure BCFG0"
	default n
	depends on EXPERIMENTAL # Not used

config LPC2378_BCFG1_SETUP
	bool "Configure BCFG1"
	default n
	depends on EXPERIMENTAL # Not used

config LPC2378_BCFG2_SETUP
	bool "Configure BCFG2"
	default n
	depends on EXPERIMENTAL # Not used

config BCFG3_SETUP
	bool "Configure BCFG3"
	default n
	depends on EXPERIMENTAL # Not used

config LPC2378_ADC_SETUP
	bool "Configure ADC"
	default y
	depends on EXPERIMENTAL # Not used

menu "LPC2378 Peripheral Support"

config LPC2378_UART0
	bool "UART0"
	default n
	select ARCH_HAVE_UART0

config LPC2378_UART1
	bool "UART1"
	default n
	select ARCH_HAVE_UART1

config LPC2378_UART2
	bool "UART2"
	default n
	select ARCH_HAVE_UART2

config LPC2378_UART3
	bool "UART3"
	default n
	select ARCH_HAVE_UART3

config LPC2378_USBDEV
	bool "USB Device"
	default n
	depends on USBDEV

config LPC2378_I2C0
	bool "I2C0"
	default n
	select I2C

config LPC2378_I2C1
	bool "I2C1"
	default n
	select I2C

config LPC2378_I2C2
	bool "I2C2"
	default n
	select I2C

config LPC2378_SPI
	bool "SPI"
	default n
	select SPI

endmenu

if LPC2378_USBDEV
menu "LPC2378 USB Device Configuration"

config LPC2378_USBDEV_DMA
	bool "USB Device DMA Support"
	default n

config LPC2378_USBDEV_NDMADESCRIPTORS
	int "Number of USB DMA Descriptors"
	default 8
	depends on LPC2378_USBDEV_DMA

config LPC2378_USBDEV_EPFAST_INTERRUPT
	bool "USB Device Fast Endpoint Interrupts"
	default n

config LPC2378_USBDEV_FRAME_INTERRUPT
	bool "USB Device Frame Interrupts"
	default n

config LPC2378_USBDEV_REGDEBUG
	bool "USB Device Register-Level Debug Output"
	default n
	depends on DEBUG

endmenu
endif