/**************************************************************************** * fs/vfs/fs_select.c * * Copyright (C) 2008-2009, 2012-2013 Gregory Nutt. All rights reserved. * Author: Gregory Nutt * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in * the documentation and/or other materials provided with the * distribution. * 3. Neither the name NuttX nor the names of its contributors may be * used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE * POSSIBILITY OF SUCH DAMAGE. * ****************************************************************************/ /**************************************************************************** * Included Files ****************************************************************************/ #include #include #include #include #include #include #include #include #include #include #include "inode/inode.h" #ifndef CONFIG_DISABLE_POLL /**************************************************************************** * Pre-processor Definitions ****************************************************************************/ /**************************************************************************** * Private Functions ****************************************************************************/ /**************************************************************************** * Public Functions ****************************************************************************/ /**************************************************************************** * Name: select * * Description: * select() allows a program to monitor multiple file descriptors, waiting * until one or more of the file descriptors become "ready" for some class * of I/O operation (e.g., input possible). A file descriptor is * considered ready if it is possible to perform the corresponding I/O * operation (e.g., read(2)) without blocking. * * NOTE: poll() is the fundamental API for performing such monitoring * operation under NuttX. select() is provided for compatibility and * is simply a layer of added logic on top of poll(). As such, select() * is more wasteful of resources and poll() is the recommended API to be * used. * * Input parameters: * nfds - the maximum fd number (+1) of any descriptor in any of the * three sets. * readfds - the set of descriptions to monitor for read-ready events * writefds - the set of descriptions to monitor for write-ready events * exceptfds - the set of descriptions to monitor for error events * timeout - Return at this time if none of these events of interest * occur. * * Return: * 0: Timer expired * >0: The number of bits set in the three sets of descriptors * -1: An error occurred (errno will be set appropriately) * ****************************************************************************/ int select(int nfds, FAR fd_set *readfds, FAR fd_set *writefds, FAR fd_set *exceptfds, FAR struct timeval *timeout) { struct pollfd *pollset; int fd; int npfds; int msec; int ndx; int ret; /* How many pollfd structures do we need to allocate? */ /* Initialize the descriptor list for poll() */ for (fd = 0, npfds = 0; fd < nfds; fd++) { /* Check if any monitor operation is requested on this fd */ if ((readfds && FD_ISSET(fd, readfds)) || (writefds && FD_ISSET(fd, writefds)) || (exceptfds && FD_ISSET(fd, exceptfds))) { /* Yes.. increment the count of pollfds structures needed */ npfds++; } } /* Allocate the descriptor list for poll() */ pollset = (struct pollfd *)kmm_zalloc(npfds * sizeof(struct pollfd)); if (!pollset) { set_errno(ENOMEM); return ERROR; } /* Initialize the descriptor list for poll() */ for (fd = 0, ndx = 0; fd < nfds; fd++) { int incr = 0; /* The readfs set holds the set of FDs that the caller can be assured * of reading from without blocking. Note that POLLHUP is included as * a read-able condition. POLLHUP will be reported at the end-of-file * or when a connection is lost. In either case, the read() can then * be performed without blocking. */ if (readfds && FD_ISSET(fd, readfds)) { pollset[ndx].fd = fd; pollset[ndx].events |= POLLIN; incr = 1; } /* The writefds set holds the set of FDs that the caller can be assured * of writing to without blocking. */ if (writefds && FD_ISSET(fd, writefds)) { pollset[ndx].fd = fd; pollset[ndx].events |= POLLOUT; incr = 1; } /* The exceptfds set holds the set of FDs that are watched for exceptions */ if (exceptfds && FD_ISSET(fd, exceptfds)) { pollset[ndx].fd = fd; incr = 1; } ndx += incr; } DEBUGASSERT(ndx == npfds); /* Convert the timeout to milliseconds */ if (timeout) { /* Calculate the timeout in milliseconds */ msec = timeout->tv_sec * 1000 + timeout->tv_usec / 1000; } else { /* Any negative value of msec means no timeout */ msec = -1; } /* Then let poll do all of the real work. */ ret = poll(pollset, npfds, msec); /* Now set up the return values */ if (readfds) { memset(readfds, 0, sizeof(fd_set)); } if (writefds) { memset(writefds, 0, sizeof(fd_set)); } if (exceptfds) { memset(exceptfds, 0, sizeof(fd_set)); } /* Convert the poll descriptor list back into selects 3 bitsets */ if (ret > 0) { ret = 0; for (ndx = 0; ndx < npfds; ndx++) { /* Check for read conditions. Note that POLLHUP is included as a * read condition. POLLHUP will be reported when no more data will * be available (such as when a connection is lost). In either * case, the read() can then be performed without blocking. */ if (readfds) { if (pollset[ndx].revents & (POLLIN|POLLHUP)) { FD_SET(pollset[ndx].fd, readfds); ret++; } } /* Check for write conditions */ if (writefds) { if (pollset[ndx].revents & POLLOUT) { FD_SET(pollset[ndx].fd, writefds); ret++; } } /* Check for exceptions */ if (exceptfds) { if (pollset[ndx].revents & POLLERR) { FD_SET(pollset[ndx].fd, exceptfds); ret++; } } } } kmm_free(pollset); return ret; } #endif /* CONFIG_DISABLE_POLL */