---
layout: global
title: GraphX Programming Guide
---
* This will become a table of contents (this text will be scraped).
{:toc}
# Overview
GraphX is the new (alpha) Spark API for graphs and graph-parallel computation. At a high-level,
GraphX extends the Spark [RDD](api/core/index.html#org.apache.spark.rdd.RDD) by introducing the
[Resilient Distributed property Graph (RDG)](#property_graph): a directed multigraph with properties
attached to each vertex and edge. To support graph computation, GraphX exposes a set of fundamental
operators (e.g., [subgraph](#structural_operators), [joinVertices](#join_operators), and
[mapReduceTriplets](#mrTriplets)) as well as an optimized variant of the [Pregel](#pregel) API. In
addition, GraphX includes a growing collection of graph [algorithms](#graph_algorithms) and
[builders](#graph_builders) to simplify graph analytics tasks.
## Background on Graph-Parallel Computation
From social networks to language modeling, the growing scale and importance of
graph data has driven the development of numerous new *graph-parallel* systems
(e.g., [Giraph](http://http://giraph.apache.org) and
[GraphLab](http://graphlab.org)). By restricting the types of computation that can be
expressed and introducing new techniques to partition and distribute graphs,
these systems can efficiently execute sophisticated graph algorithms orders of
magnitude faster than more general *data-parallel* systems.
However, the same restrictions that enable these substantial performance gains
also make it difficult to express many of the important stages in a typical graph-analytics pipeline:
constructing the graph, modifying its structure, or expressing computation that
spans multiple graphs. As a consequence, existing graph analytics pipelines
compose graph-parallel and data-parallel systems, leading to extensive data
movement and duplication and a complicated programming model.
The goal of the GraphX project is to unify graph-parallel and data-parallel computation in one
system with a single composable API. The GraphX API enables users to view data both as a graph and
as collections (i.e., RDDs) without data movement or duplication. By incorporating recent advances
in graph-parallel systems, GraphX is able to optimize the execution of graph operations.
## GraphX Replaces the Spark Bagel API
Prior to the release of GraphX, graph computation in Spark was expressed using Bagel, an
implementation of Pregel. GraphX improves upon Bagel by exposing a richer property graph API, a
more streamlined version of the Pregel abstraction, and system optimizations to improve performance
and reduce memory overhead. While we plan to eventually deprecate Bagel, we will continue to
support the [Bagel API](api/bagel/index.html#org.apache.spark.bagel.package) and
[Bagel programming guide](bagel-programming-guide.html). However, we encourage Bagel users to
explore the new GraphX API and comment on issues that may complicate the transition from Bagel.
# Getting Started
To get started you first need to import Spark and GraphX into your project, as follows:
{% highlight scala %}
import org.apache.spark._
import org.apache.spark.graphx._
{% endhighlight %}
If you are not using the Spark shell you will also need a Spark context.
# The Property Graph
The [property graph](api/graphx/index.html#org.apache.spark.graphx.Graph) is a directed multigraph
with user defined objects attached to each vertex and edge. A directed multigraph is a directed
graph with potentially multiple parallel edges sharing the same source and destination vertex. The
ability to support parallel edges simplifies modeling scenarios where there can be multiple
relationships (e.g., co-worker and friend) between the same vertices. Each vertex is keyed by a
*unique* 64-bit long identifier (`VertexId`). Similarly, edges have corresponding source and
destination vertex identifiers. GraphX does not impose any ordering or constraints on the vertex
identifiers. The property graph is parameterized over the vertex `VD` and edge `ED` types. These
are the types of the objects associated with each vertex and edge respectively.
> GraphX optimizes the representation of `VD` and `ED` when they are plain old data-types (e.g.,
> int, double, etc...) reducing the in memory footprint.
In some cases we may wish to have vertices with different property types in the same graph. This can
be accomplished through inheritance. For example to model users and products as a bipartite graph
we might do the following:
{% highlight scala %}
case class VertexProperty
case class UserProperty extends VertexProperty
(val name: String)
case class ProductProperty extends VertexProperty
(val name: String, val price: Double)
// The graph might then have the type:
val graph: Graph[VertexProperty, String]
{% endhighlight %}
Like RDDs, property graphs are immutable, distributed, and fault-tolerant. Changes to the values or
structure of the graph are accomplished by producing a new graph with the desired changes. The graph
is partitioned across the workers using a range of vertex-partitioning heuristics. As with RDDs,
each partition of the graph can be recreated on a different machine in the event of a failure.
Logically the property graph corresponds to a pair of typed collections (RDDs) encoding the
properties for each vertex and edge. As a consequence, the graph class contains members to access
the vertices and edges of the graph:
{% highlight scala %}
val vertices: VertexRDD[VD]
val edges: EdgeRDD[ED]
{% endhighlight %}
The classes `VertexRDD[VD]` and `EdgeRDD[ED]` extend and are optimized versions of `RDD[(VertexId,
VD)]` and `RDD[Edge[ED]]` respectively. Both `VertexRDD[VD]` and `EdgeRDD[ED]` provide additional
functionality built around graph computation and leverage internal optimizations. We discuss the
`VertexRDD` and `EdgeRDD` API in greater detail in the section on [vertex and edge
RDDs](#vertex_and_edge_rdds) but for now they can be thought of as simply RDDs of the form:
`RDD[(VertexId, VD)]` and `RDD[Edge[ED]]`.
### Example Property Graph
Suppose we want to construct a property graph consisting of the various collaborators on the GraphX
project. The vertex property might contain the username and occupation. We could annotate edges
with a string describing the relationships between collaborators:
The resulting graph would have the type signature:
{% highlight scala %}
val userGraph: Graph[(String, String), String]
{% endhighlight %}
There are numerous ways to construct a property graph from raw files, RDDs, and even synthetic
generators and these are discussed in more detail in the section on
[graph builders](#graph_builders). Probably the most general method is to use the
[Graph object](api/graphx/index.html#org.apache.spark.graphx.Graph$). For example the following
code constructs a graph from a collection of RDDs:
{% highlight scala %}
// Assume the SparkContext has already been constructed
val sc: SparkContext
// Create an RDD for the vertices
val users: RDD[(VertexId, (String, String))] =
sc.parallelize(Array((3, ("rxin", "student")), (7, ("jgonzal", "postdoc")),
(5, ("franklin", "prof")), (2, ("istoica", "prof"))))
// Create an RDD for edges
val relationships: RDD[Edge[String]] =
sc.parallelize(Array(Edge(3, 7, "collab"), Edge(5, 3, "advisor"),
Edge(2, 5, "colleague"), Edge(5, 7, "pi"))
// Define a default user in case there are relationship with missing user
val defaultUser = ("John Doe", "Missing")
// Build the initial Graph
val graph = Graph(users, relationships, defaultUser)
{% endhighlight %}
In the above example we make use of the [`Edge`][Edge] case class. Edges have a `srcId` and a
`dstId` corresponding to the source and destination vertex identifiers. In addition, the `Edge`
class contains the `attr` member which contains the edge property.
[Edge]: api/graphx/index.html#org.apache.spark.graphx.Edge
We can deconstruct a graph into the respective vertex and edge views by using the `graph.vertices`
and `graph.edges` members respectively.
{% highlight scala %}
val graph: Graph[(String, String), String] // Constructed from above
// Count all users which are postdocs
graph.vertices.filter { case (id, (name, pos)) => pos == "postdoc"}.count
// Count all the edges where src > dst
graph.edges.filter(e => e.srcId > e.dstId).count
{% endhighlight %}
> Note that `graph.vertices` returns an `VertexRDD[(String, String)]` which extends
> `RDD[(VertexId, (String, String))]` and so we use the scala `case` expression to deconstruct the
> tuple. On the other hand, `graph.edges` returns an `EdgeRDD` containing `Edge[String]` objects.
> We could have also used the case class type constructor as in the following:
> {% highlight scala %}
graph.edges.filter { case Edge(src, dst, prop) => src < dst }.count
{% endhighlight %}
In addition to the vertex and edge views of the property graph, GraphX also exposes a triplet view.
The triplet view logically joins the vertex and edge properties yielding an
`RDD[EdgeTriplet[VD, ED]]` containing instances of the [`EdgeTriplet`][EdgeTriplet] class. This
*join* can be expressed in the following SQL expression:
[EdgeTriplet]: api/graphx/index.html#org.apache.spark.graphx.EdgeTriplet
{% highlight sql %}
SELECT src.id, dst.id, src.attr, e.attr, dst.attr
FROM edges AS e LEFT JOIN vertices AS src, vertices AS dst
ON e.srcId = src.Id AND e.dstId = dst.Id
{% endhighlight %}
or graphically as:
The [`EdgeTriplet`][EdgeTriplet] class extends the [`Edge`][Edge] class by adding the `srcAttr` and
`dstAttr` members which contain the source and destination properties respectively. We can use the
triplet view of a graph to render a collection of strings describing relationships between users.
{% highlight scala %}
val graph: Graph[(String, String), String] // Constructed from above
// Use the triplets view to create an RDD of facts.
val facts: RDD[String] =
graph.triplets.map(et => et.srcAttr._1 + " is the " + et.attr + " of " et.dstAttr)
{% endhighlight %}
# Graph Operators
Just as RDDs have basic operations like `map`, `filter`, and `reduceByKey`, property graphs also
have a collection of basic operators that take user defined functions and produce new graphs with
transformed properties and structure. The core operators that have optimized implementations are
defined in [`Graph`][Graph] and convenient operators that are expressed as a compositions of the
core operators are defined in [`GraphOps`][GraphOps]. However, thanks to Scala implicits the
operators in `GraphOps` are automatically available as members of `Graph`. For example, we can
compute the in-degree of each vertex (defined in `GraphOps`) by the following:
[Graph]: api/graphx/index.html#org.apache.spark.graphx.Graph
[GraphOps]: api/graphx/index.html#org.apache.spark.graphx.GraphOps
{% highlight scala %}
val graph: Graph[(String, String), String]
// Use the implicit GraphOps.inDegrees operator
val indDegrees: VertexRDD[Int] = graph.inDegrees
{% endhighlight %}
The reason for differentiating between core graph operations and GraphOps is to be able to support
various graph representations in the future.
## Property Operators
In direct analogy to the RDD `map` operator, the property
graph contains the following:
{% highlight scala %}
def mapVertices[VD2](map: (VertexID, VD) => VD2): Graph[VD2, ED]
def mapEdges[ED2](map: Edge[ED] => ED2): Graph[VD, ED2]
def mapTriplets[ED2](map: EdgeTriplet[VD, ED] => ED2): Graph[VD, ED2]
{% endhighlight %}
Each of these operators yields a new graph with the vertex or edge properties modified by the user
defined `map` function.
> Note that in all cases the graph structure is unaffected. This is a key feature of these operators
> which allows the resulting graph to reuse the structural indices of the original graph. The
> following snippets are logically equivalent, but the first one does not preserve the structural
> indices and would not benefit from the GraphX system optimizations:
> {% highlight scala %}
val newVertices = graph.vertices.map { case (id, attr) => (id, mapUdf(id, attr)) }
val newGraph = Graph(newVertices, graph.edges)
{% endhighlight %}
> Instead, use [`mapVertices`][Graph.mapVertices] to preserve the indices:
> {% highlight scala %}
val newGraph = graph.mapVertices((id, attr) => mapUdf(id, attr))
{% endhighlight %}
[Graph.mapVertices]: api/graphx/index.html#org.apache.spark.graphx.Graph@mapVertices[VD2]((VertexID,VD)⇒VD2)(ClassTag[VD2]):Graph[VD2,ED]
These operators are often used to initialize the graph for a particular computation or project away
unnecessary properties. For example, given a graph with the out-degrees as the vertex properties
(we describe how to construct such a graph later), we initialize it for PageRank:
{% highlight scala %}
// Given a graph where the vertex property is the out-degree
val inputGraph: Graph[Int, String]
// Construct a graph where each edge contains the weight
// and each vertex is the initial PageRank
val outputGraph: Graph[Double, Double] =
inputGraph.mapTriplets(et => 1.0 / et.srcAttr).mapVertices(v => 1.0)
{% endhighlight %}
## Structural Operators
Currently GraphX supports only a simple set of commonly used structural operators and we expect to
add more in the future. The following is a list of the basic structural operators.
{% highlight scala %}
def reverse: Graph[VD, ED]
def subgraph(epred: EdgeTriplet[VD,ED] => Boolean,
vpred: (VertexID, VD) => Boolean): Graph[VD, ED]
def mask[VD2, ED2](other: Graph[VD2, ED2]): Graph[VD, ED]
def groupEdges(merge: (ED, ED) => ED): Graph[VD,ED]
{% endhighlight %}
The [`reverse`][Graph.reverse] operator returns a new graph with all the edge directions reversed.
This can be useful when, for example, trying to compute the inverse PageRank. Because the reverse
operation does not modify vertex or edge properties or change the number of edges, it can be
implemented efficiently without data-movement or duplication.
[Graph.reverse]: api/graphx/index.html#org.apache.spark.graphx.Graph@reverse:Graph[VD,ED]
The [`subgraph`][Graph.subgraph] operator takes vertex and edge predicates and returns the graph
containing only the vertices that satisfy the vertex predicate (evaluate to true) and edges that
satisfy the edge predicate *and connect vertices that satisfy the vertex predicate*. The `subgraph`
operator can be used in number of situations to restrict the graph to the vertices and edges of
interest or eliminate broken links. For example in the following code we remove broken links:
[Graph.subgraph]: api/graphx/index.html#org.apache.spark.graphx.Graph@subgraph((EdgeTriplet[VD,ED])⇒Boolean,(VertexID,VD)⇒Boolean):Graph[VD,ED]
{% highlight scala %}
val users: RDD[(VertexId, (String, String))]
val edges: RDD[Edge[String]]
// Define a default user in case there are relationship with missing user
val defaultUser = ("John Doe", "Missing")
// Build the initial Graph
val graph = Graph(users, relationships, defaultUser)
// Remove missing vertices as well as the edges to connected to them
val validGraph = graph.subgraph((id, attr) => attr._2 != "Missing")
{% endhighlight %}
> Note in the above example only the vertex predicate is provided. The `subgraph` operator defaults
> to `true` if the vertex or edge predicates are not provided.
The [`mask`][Graph.mask] operator also constructs a subgraph by returning a graph that contains the
vertices and edges that are also found in the input graph. This can be used in conjunction with the
`subgraph` operator to restrict a graph based on the properties in another related graph. For
example, we might run connected components using the graph with missing vertices and then restrict
the answer to the valid subgraph.
[Graph.mask]: api/graphx/index.html#org.apache.spark.graphx.Graph@mask[VD2,ED2](Graph[VD2,ED2])(ClassTag[VD2],ClassTag[ED2]):Graph[VD,ED]
{% highlight scala %}
// Run Connected Components
val ccGraph = graph.connectedComponents() // No longer contains missing field
// Remove missing vertices as well as the edges to connected to them
val validGraph = graph.subgraph((id, attr) => attr._2 != "Missing")
// Restrict the answer to the valid subgraph
val validCCGraph = ccGraph.mask(validGraph)
{% endhighlight %}
The [`groupEdges`][Graph.groupEdges] operator merges parallel edges (i.e., duplicate edges between
pairs of vertices) in the multigraph. In many numerical applications, parallel edges can be *added*
(their weights combined) into a single edge thereby reducing the size of the graph.
[Graph.groupEdges]: api/graphx/index.html#org.apache.spark.graphx.Graph@groupEdges((ED,ED)⇒ED):Graph[VD,ED]
## Join Operators
In many cases it is necessary to join data from external collections (RDDs) with graphs. For
example, we might have extra user properties that we want to merge with an existing graph or we
might want to pull vertex properties from one graph into another. These tasks can be accomplished
using the *join* operators. Below we list the key join operators:
{% highlight scala %}
def joinVertices[U](table: RDD[(VertexID, U)])(map: (VertexID, VD, U) => VD)
: Graph[VD, ED]
def outerJoinVertices[U, VD2](table: RDD[(VertexID, U)])(map: (VertexID, VD, Option[U]) => VD2)
: Graph[VD2, ED]
{% endhighlight %}
The [`joinVertices`][GraphOps.joinVertices] operator joins the vertices with the input RDD and
returns a new graph with the vertex properties obtained by applying the user defined `map` function
to the result of the joined vertices. Vertices without a matching value in the RDD retain their
original value.
[GraphOps.joinVertices]: api/graphx/index.html#org.apache.spark.graphx.GraphOps@joinVertices[U](RDD[(VertexID,U)])((VertexID,VD,U)⇒VD)(ClassTag[U]):Graph[VD,ED]
> Note that if the RDD contains more than one value for a given vertex only one will be used. It
> is therefore recommended that the input RDD be first made unique using the following which will
> also *pre-index* the resulting values to substantially accelerate the subsequent join.
> {% highlight scala %}
val nonUniqueCosts: RDD[(VertexId, Double)]
val uniqueCosts: VertexRDD[Double] =
graph.vertices.aggregateUsingIndex(nonUnique, (a,b) => a + b)
val joinedGraph = graph.joinVertices(uniqueCosts)(
(id, oldCost, extraCost) => oldCost + extraCost)
{% endhighlight %}
The more general [`outerJoinVertices`][Graph.outerJoinVertices] behaves similarly to `joinVertices`
except that the user defined `map` function is applied to all vertices and can change the vertex
property type. Because not all vertices may have a matching value in the input RDD the `map`
function takes an `Option` type. For example, we can setup a graph for PageRank by initializing
vertex properties with their `outDegree`.
[Graph.outerJoinVertices]: api/graphx/index.html#org.apache.spark.graphx.Graph@outerJoinVertices[U,VD2](RDD[(VertexID,U)])((VertexID,VD,Option[U])⇒VD2)(ClassTag[U],ClassTag[VD2]):Graph[VD2,ED]
{% highlight scala %}
val outDegrees: VertexRDD[Int] = graph.outDegrees
val degreeGraph = graph.outerJoinVertices(outDegrees) { (id, oldAttr, outDegOpt) =>
outDegOpt match {
case Some(outDeg) => outDeg
case None => 0 // No outDegree means zero outDegree
}
}
{% endhighlight %}
> You may have noticed the multiple parameter lists (e.g., `f(a)(b)`) curried function pattern used
> in the above examples. While we could have equally written `f(a)(b)` as `f(a,b)` this would mean
> that type inference on `b` would not depend on `a`. As a consequence, the user would need to
> provide type annotation for the user defined function:
> {% highlight scala %}
val joinedGraph = graph.joinVertices(uniqueCosts,
(id: VertexId, oldCost: Double, extraCost: Double) => oldCost + extraCost)
{% endhighlight %}
## Map Reduce Triplets (mapReduceTriplets)
# Pregel API
# Graph Builders
# Vertex and Edge RDDs
# Optimized Representation
This section should give some intuition about how GraphX works and how that affects the user (e.g.,
things to worry about.)
# Graph Algorithms
GraphX includes a set of graph algorithms in to simplify analytics. The algorithms are contained in the `org.apache.spark.graphx.lib` package and can be accessed directly as methods on `Graph` via an implicit conversion to [`Algorithms`][Algorithms]. This section describes the algorithms and how they are used.
[Algorithms]: api/graphx/index.html#org.apache.spark.graphx.lib.Algorithms
## PageRank
PageRank measures the importance of each vertex in a graph, assuming an edge from *u* to *v* represents an endorsement of *v*'s importance by *u*. For example, if a Twitter user is followed by many others, the user will be ranked highly.
Spark includes an example social network dataset that we can run PageRank on. A set of users is given in `graphx/data/users.txt`, and a set of relationships between users is given in `graphx/data/followers.txt`. We can compute the PageRank of each user as follows:
{% highlight scala %}
// Load the implicit conversion to Algorithms
import org.apache.spark.graphx.lib._
// Load the datasets into a graph
val users = sc.textFile("graphx/data/users.txt").map { line =>
val fields = line.split("\\s+")
(fields(0).toLong, fields(1))
}
val followers = sc.textFile("graphx/data/followers.txt").map { line =>
val fields = line.split("\\s+")
Edge(fields(0).toLong, fields(1).toLong, 1)
}
val graph = Graph(users, followers)
// Run PageRank
val ranks = graph.pageRank(0.0001).vertices
// Join the ranks with the usernames
val ranksByUsername = users.leftOuterJoin(ranks).map {
case (id, (username, rankOpt)) => (username, rankOpt.getOrElse(0.0))
}
// Print the result
println(ranksByUsername.collect().mkString("\n"))
{% endhighlight %}
## Connected Components
The connected components algorithm labels each connected component of the graph with the ID of its lowest-numbered vertex. For example, in a social network, connected components can approximate clusters. We can compute the connected components of the example social network dataset from the [PageRank section](#pagerank) as follows:
{% highlight scala %}
// Load the implicit conversion and graph as in the PageRank example
import org.apache.spark.graphx.lib._
val users = ...
val followers = ...
val graph = Graph(users, followers)
// Find the connected components
val cc = graph.connectedComponents().vertices
// Join the connected components with the usernames
val ccByUsername = graph.vertices.innerJoin(cc) { (id, username, cc) =>
(username, cc)
}
// Print the result
println(ccByUsername.collect().mkString("\n"))
{% endhighlight %}
## Shortest Path
## Triangle Counting
## K-Core
## LDA
# Examples
Suppose I want to build a graph from some text files, restrict the graph
to important relationships and users, run page-rank on the sub-graph, and
then finally return attributes associated with the top users. I can do
all of this in just a few lines with GraphX:
{% highlight scala %}
// Connect to the Spark cluster
val sc = new SparkContext("spark://master.amplab.org", "research")
// Load my user data and prase into tuples of user id and attribute list
val users = sc.textFile("hdfs://user_attributes.tsv")
.map(line => line.split).map( parts => (parts.head, parts.tail) )
// Parse the edge data which is already in userId -> userId format
val followerGraph = Graph.textFile(sc, "hdfs://followers.tsv")
// Attach the user attributes
val graph = followerGraph.outerJoinVertices(users){
case (uid, deg, Some(attrList)) => attrList
// Some users may not have attributes so we set them as empty
case (uid, deg, None) => Array.empty[String]
}
// Restrict the graph to users which have exactly two attributes
val subgraph = graph.subgraph((vid, attr) => attr.size == 2)
// Compute the PageRank
val pagerankGraph = Analytics.pagerank(subgraph)
// Get the attributes of the top pagerank users
val userInfoWithPageRank = subgraph.outerJoinVertices(pagerankGraph.vertices){
case (uid, attrList, Some(pr)) => (pr, attrList)
case (uid, attrList, None) => (pr, attrList)
}
println(userInfoWithPageRank.top(5))
{% endhighlight %}