|
|
/************************************************************************************
* arch/arm/src/lm/chip/lm3s_memorymap.h
*
* Copyright (C) 2009-2010 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <gnutt@nuttx.org>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
************************************************************************************/
#ifndef __ARCH_ARM_SRC_LM_CHIP_LM3S_MEMORYMAP_H
#define __ARCH_ARM_SRC_LM_CHIP_LM3S_MEMORYMAP_H
/************************************************************************************
* Included Files
************************************************************************************/
#include <nuttx/config.h>
/************************************************************************************
* Pre-processor Definitions
************************************************************************************/
/* Memory map ***********************************************************************/
#if defined(CONFIG_ARCH_CHIP_LM3S6918) || defined(CONFIG_ARCH_CHIP_LM3S6432) || \
defined(CONFIG_ARCH_CHIP_LM3S6965) || defined(CONFIG_ARCH_CHIP_LM3S8962)
# define LM_FLASH_BASE 0x00000000 /* -0x0003ffff: On-chip FLASH */
/* -0x1fffffff: Reserved */
# define LM_SRAM_BASE 0x20000000 /* -0x2000ffff: Bit-banded on-chip SRAM */
/* -0x21ffffff: Reserved */
# define LM_ASRAM_BASE 0x22000000 /* -0x221fffff: Bit-band alias of 20000000- */
/* -0x3fffffff: Reserved */
# define LM_PERIPH_BASE 0x40000000 /* -0x4001ffff: FiRM Peripherals */
/* -0x41ffffff: Peripherals */
# define LM_APERIPH_BASE 0x42000000 /* -0x43ffffff: Bit-band alias of 40000000- */
/* -0xdfffffff: Reserved */
# define LM_ITM_BASE 0xe0000000 /* -0xe0000fff: Instrumentation Trace Macrocell */
# define LM_DWT_BASE 0xe0001000 /* -0xe0001fff: Data Watchpoint and Trace */
# define LM_FPB_BASE 0xe0002000 /* -0xe0002fff: Flash Patch and Breakpoint */
/* -0xe000dfff: Reserved */
# define LM_NVIC_BASE 0xe000e000 /* -0xe000efff: Nested Vectored Interrupt Controller */
/* -0xe003ffff: Reserved */
# define LM_TPIU_BASE 0xe0040000 /* -0xe0040fff: Trace Port Interface Unit */
/* -0xffffffff: Reserved */
#elif defined(CONFIG_ARCH_CHIP_LM3S9B96)
# define LM_FLASH_BASE 0x00000000 /* -0x0003ffff: On-chip FLASH */
/* -0x1fffffff: Reserved */
# define LM_SRAM_BASE 0x20000000 /* -0x2000ffff: Bit-banded on-chip SRAM */
/* -0x21ffffff: Reserved */
# define LM_ASRAM_BASE 0x22000000 /* -0x221fffff: Bit-band alias of 20000000- */
/* -0x3fffffff: Reserved */
# define LM_PERIPH_BASE 0x40000000 /* -0x4001ffff: FiRM Peripherals */
/* -0x41ffffff: Peripherals */
# define LM_APERIPH_BASE 0x42000000 /* -0x43ffffff: Bit-band alise of 40000000- */
/* -0x5fffffff: Reserved */
# define LM_EPI0RAM_BASE 0x60000000 /* -0xdfffffff: EPI0 mapped peripheral and RAM */
# define LM_ITM_BASE 0xe0000000 /* -0xe0000fff: Instrumentation Trace Macrocell */
# define LM_DWT_BASE 0xe0001000 /* -0xe0001fff: Data Watchpoint and Trace */
# define LM_FPB_BASE 0xe0002000 /* -0xe0002fff: Flash Patch and Breakpoint */
/* -0xe000dfff: Reserved */
# define LM_NVIC_BASE 0xe000e000 /* -0xe000efff: Nested Vectored Interrupt Controller */
/* -0xe003ffff: Reserved */
# define LM_TPIU_BASE 0xe0040000 /* -0xe0040fff: Trace Port Interface Unit */
/* -0xffffffff: Reserved */
#else
# error "Memory map not specified for this LM3S chip"
#endif
/* Peripheral base addresses ********************************************************/
/* The LM3S6918 and LM3S6965 differ by only the presence or absence of a few differnt
* peripheral modules. They could probably be combined into one peripheral memory
* map. However, keeping them separate does also provide so early, compile-time
* error detection that makes the duplication worthwhile.
*/
#if defined(CONFIG_ARCH_CHIP_LM3S6918)
/* FiRM Peripheral Base Addresses */
# define LM_WDOG_BASE (LM_PERIPH_BASE + 0x00000) /* -0x00fff: Watchdog Timer */
/* -0x03fff: Reserved */
# define LM_GPIOA_BASE (LM_PERIPH_BASE + 0x04000) /* -0x04fff: GPIO Port A */
# define LM_GPIOB_BASE (LM_PERIPH_BASE + 0x05000) /* -0x05fff: GPIO Port B */
# define LM_GPIOC_BASE (LM_PERIPH_BASE + 0x06000) /* -0x06fff: GPIO Port C */
# define LM_GPIOD_BASE (LM_PERIPH_BASE + 0x07000) /* -0x07fff: GPIO Port D */
# define LM_SSI0_BASE (LM_PERIPH_BASE + 0x08000) /* -0x08fff: SSI0 */
# define LM_SSI1_BASE (LM_PERIPH_BASE + 0x09000) /* -0x09fff: SSI1 */
/* -0x0bfff: Reserved */
# define LM_UART0_BASE (LM_PERIPH_BASE + 0x0c000) /* -0x0cfff: UART0 */
# define LM_UART1_BASE (LM_PERIPH_BASE + 0x0d000) /* -0x0dfff: UART1 */
/* -0x1ffff: Reserved */
/* Peripheral Base Addresses */
# define LM_I2CM0_BASE (LM_PERIPH_BASE + 0x20000) /* -0x207ff: I2C Master 0 */
# define LM_I2CS0_BASE (LM_PERIPH_BASE + 0x20800) /* -0x20fff: I2C Slave 0 */
# define LM_I2CM1_BASE (LM_PERIPH_BASE + 0x21000) /* -0x217ff: I2C Master 1 */
# define LM_I2CS1_BASE (LM_PERIPH_BASE + 0x21800) /* -0x21fff: I2C Slave 1 */
/* -0x23fff: Reserved */
# define LM_GPIOE_BASE (LM_PERIPH_BASE + 0x24000) /* -0x24fff: GPIO Port E */
# define LM_GPIOF_BASE (LM_PERIPH_BASE + 0x25000) /* -0x25fff: GPIO Port F */
# define LM_GPIOG_BASE (LM_PERIPH_BASE + 0x26000) /* -0x26fff: GPIO Port G */
# define LM_GPIOH_BASE (LM_PERIPH_BASE + 0x27000) /* -0x27fff: GPIO Port H */
/* -0x2ffff: Reserved */
# define LM_TIMER0_BASE (LM_PERIPH_BASE + 0x30000) /* -0x30fff: Timer 0 */
# define LM_TIMER1_BASE (LM_PERIPH_BASE + 0x31000) /* -0x31fff: Timer 1 */
# define LM_TIMER2_BASE (LM_PERIPH_BASE + 0x32000) /* -0x32fff: Timer 2 */
# define LM_TIMER3_BASE (LM_PERIPH_BASE + 0x33000) /* -0x33fff: Timer 3 */
/* -0x37fff: Reserved */
# define LM_ADC_BASE (LM_PERIPH_BASE + 0x38000) /* -0x38fff: ADC */
/* -0x3bfff: Reserved */
# define LM_COMPARE_BASE (LM_PERIPH_BASE + 0x3c000) /* -0x3cfff: Analog Comparators */
/* -0x47fff: Reserved */
# define LM_ETHCON_BASE (LM_PERIPH_BASE + 0x48000) /* -0x48fff: Ethernet Controller */
/* -0xfcfff: Reserved */
# define LM_HIBERNATE_BASE (LM_PERIPH_BASE + 0xfc000) /* -0xfcfff: Ethernet Controller */
# define LM_FLASHCON_BASE (LM_PERIPH_BASE + 0xfd000) /* -0xfdfff: FLASH Control */
# define LM_SYSCON_BASE (LM_PERIPH_BASE + 0xfe000) /* -0xfefff: System Control */
/* -0x1ffffff: Reserved */
#elif defined(CONFIG_ARCH_CHIP_LM3S6432)
/* FiRM Peripheral Base Addresses */
# define LM_WDOG_BASE (LM_PERIPH_BASE + 0x00000) /* -0x00fff: Watchdog Timer */
/* -0x03fff: Reserved */
# define LM_GPIOA_BASE (LM_PERIPH_BASE + 0x04000) /* -0x04fff: GPIO Port A */
# define LM_GPIOB_BASE (LM_PERIPH_BASE + 0x05000) /* -0x05fff: GPIO Port B */
# define LM_GPIOC_BASE (LM_PERIPH_BASE + 0x06000) /* -0x06fff: GPIO Port C */
# define LM_GPIOD_BASE (LM_PERIPH_BASE + 0x07000) /* -0x07fff: GPIO Port D */
# define LM_SSI0_BASE (LM_PERIPH_BASE + 0x08000) /* -0x08fff: SSI0 */
/* -0x0bfff: Reserved */
# define LM_UART0_BASE (LM_PERIPH_BASE + 0x0c000) /* -0x0cfff: UART0 */
# define LM_UART1_BASE (LM_PERIPH_BASE + 0x0d000) /* -0x0dfff: UART1 */
/* -0x1ffff: Reserved */
/* Peripheral Base Addresses */
# define LM_I2CM0_BASE (LM_PERIPH_BASE + 0x20000) /* -0x207ff: I2C Master 0 */
# define LM_I2CS0_BASE (LM_PERIPH_BASE + 0x20800) /* -0x20fff: I2C Slave 0 */
/* -0x23fff: Reserved */
# define LM_GPIOE_BASE (LM_PERIPH_BASE + 0x24000) /* -0x24fff: GPIO Port E */
# define LM_GPIOF_BASE (LM_PERIPH_BASE + 0x25000) /* -0x25fff: GPIO Port F */
# define LM_GPIOG_BASE (LM_PERIPH_BASE + 0x26000) /* -0x26fff: GPIO Port G */
/* -0x27fff: Reserved */
# define LM_PWM0_BASE (LM_PERIPH_BASE + 0x28000) /* -0x28fff: PWM */
/* -0x2ffff: Reserved */
# define LM_TIMER0_BASE (LM_PERIPH_BASE + 0x30000) /* -0x30fff: Timer 0 */
# define LM_TIMER1_BASE (LM_PERIPH_BASE + 0x31000) /* -0x31fff: Timer 1 */
# define LM_TIMER2_BASE (LM_PERIPH_BASE + 0x32000) /* -0x32fff: Timer 2 */
/* -0x37fff: Reserved */
# define LM_ADC_BASE (LM_PERIPH_BASE + 0x38000) /* -0x38fff: ADC */
/* -0x3bfff: Reserved */
# define LM_COMPARE_BASE (LM_PERIPH_BASE + 0x3c000) /* -0x3cfff: Analog Comparators */
/* -0x47fff: Reserved */
# define LM_ETHCON_BASE (LM_PERIPH_BASE + 0x48000) /* -0x48fff: Ethernet Controller */
/* -0xfcfff: Reserved */
# define LM_HIBERNATE_BASE (LM_PERIPH_BASE + 0xfc000) /* -0xfcfff: Ethernet Controller */
# define LM_FLASHCON_BASE (LM_PERIPH_BASE + 0xfd000) /* -0xfdfff: FLASH Control */
# define LM_SYSCON_BASE (LM_PERIPH_BASE + 0xfe000) /* -0xfefff: System Control */
/* -0x1ffffff: Reserved */
#elif defined(CONFIG_ARCH_CHIP_LM3S6965)
/* FiRM Peripheral Base Addresses */
# define LM_WDOG_BASE (LM_PERIPH_BASE + 0x00000) /* -0x00fff: Watchdog Timer */
/* -0x03fff: Reserved */
# define LM_GPIOA_BASE (LM_PERIPH_BASE + 0x04000) /* -0x04fff: GPIO Port A */
# define LM_GPIOB_BASE (LM_PERIPH_BASE + 0x05000) /* -0x05fff: GPIO Port B */
# define LM_GPIOC_BASE (LM_PERIPH_BASE + 0x06000) /* -0x06fff: GPIO Port C */
# define LM_GPIOD_BASE (LM_PERIPH_BASE + 0x07000) /* -0x07fff: GPIO Port D */
# define LM_SSI0_BASE (LM_PERIPH_BASE + 0x08000) /* -0x08fff: SSI0 */
/* -0x0bfff: Reserved */
# define LM_UART0_BASE (LM_PERIPH_BASE + 0x0c000) /* -0x0cfff: UART0 */
# define LM_UART1_BASE (LM_PERIPH_BASE + 0x0d000) /* -0x0dfff: UART1 */
# define LM_UART2_BASE (LM_PERIPH_BASE + 0x0e000) /* -0x0dfff: UART2 */
/* -0x1ffff: Reserved */
/* Peripheral Base Addresses */
# define LM_I2CM0_BASE (LM_PERIPH_BASE + 0x20000) /* -0x207ff: I2C Master 0 */
# define LM_I2CS0_BASE (LM_PERIPH_BASE + 0x20800) /* -0x20fff: I2C Slave 0 */
# define LM_I2CM1_BASE (LM_PERIPH_BASE + 0x21000) /* -0x217ff: I2C Master 1 */
# define LM_I2CS1_BASE (LM_PERIPH_BASE + 0x21800) /* -0x21fff: I2C Slave 1 */
/* -0x23fff: Reserved */
# define LM_GPIOE_BASE (LM_PERIPH_BASE + 0x24000) /* -0x24fff: GPIO Port E */
# define LM_GPIOF_BASE (LM_PERIPH_BASE + 0x25000) /* -0x25fff: GPIO Port F */
# define LM_GPIOG_BASE (LM_PERIPH_BASE + 0x26000) /* -0x26fff: GPIO Port G */
/* -0x27fff: Reserved */
# define LM_PWM0_BASE (LM_PERIPH_BASE + 0x28000) /* -0x28fff: PWM */
/* -0x2bfff: Reserved */
# define LM_QEI0_BASE (LM_PERIPH_BASE + 0x2c000) /* -0x2cfff: QEI0 */
# define LM_QEI1_BASE (LM_PERIPH_BASE + 0x2d000) /* -0x2dfff: QEI1 */
/* -0x2ffff: Reserved */
# define LM_TIMER0_BASE (LM_PERIPH_BASE + 0x30000) /* -0x30fff: Timer 0 */
# define LM_TIMER1_BASE (LM_PERIPH_BASE + 0x31000) /* -0x31fff: Timer 1 */
# define LM_TIMER2_BASE (LM_PERIPH_BASE + 0x32000) /* -0x32fff: Timer 2 */
# define LM_TIMER3_BASE (LM_PERIPH_BASE + 0x33000) /* -0x33fff: Timer 3 */
/* -0x37fff: Reserved */
# define LM_ADC_BASE (LM_PERIPH_BASE + 0x38000) /* -0x38fff: ADC */
/* -0x3bfff: Reserved */
# define LM_COMPARE_BASE (LM_PERIPH_BASE + 0x3c000) /* -0x3cfff: Analog Comparators */
/* -0x47fff: Reserved */
# define LM_ETHCON_BASE (LM_PERIPH_BASE + 0x48000) /* -0x48fff: Ethernet Controller */
/* -0xfcfff: Reserved */
# define LM_HIBERNATE_BASE (LM_PERIPH_BASE + 0xfc000) /* -0xfcfff: Ethernet Controller */
# define LM_FLASHCON_BASE (LM_PERIPH_BASE + 0xfd000) /* -0xfdfff: FLASH Control */
# define LM_SYSCON_BASE (LM_PERIPH_BASE + 0xfe000) /* -0xfefff: System Control */
/* -0x1ffffff: Reserved */
#elif defined(CONFIG_ARCH_CHIP_LM3S8962)
/* FiRM Peripheral Base Addresses */
# define LM_WDOG_BASE (LM_PERIPH_BASE + 0x00000) /* -0x00fff: Watchdog Timer */
/* -0x03fff: Reserved */
# define LM_GPIOA_BASE (LM_PERIPH_BASE + 0x04000) /* -0x04fff: GPIO Port A */
# define LM_GPIOB_BASE (LM_PERIPH_BASE + 0x05000) /* -0x05fff: GPIO Port B */
# define LM_GPIOC_BASE (LM_PERIPH_BASE + 0x06000) /* -0x06fff: GPIO Port C */
# define LM_GPIOD_BASE (LM_PERIPH_BASE + 0x07000) /* -0x07fff: GPIO Port D */
# define LM_SSI0_BASE (LM_PERIPH_BASE + 0x08000) /* -0x08fff: SSI0 */
/* -0x0bfff: Reserved */
# define LM_UART0_BASE (LM_PERIPH_BASE + 0x0c000) /* -0x0cfff: UART0 */
# define LM_UART1_BASE (LM_PERIPH_BASE + 0x0d000) /* -0x0dfff: UART1 */
/* -0x1ffff: Reserved */
/* Peripheral Base Addresses */
# define LM_I2CM0_BASE (LM_PERIPH_BASE + 0x20000) /* -0x207ff: I2C Master 0 */
# define LM_I2CS0_BASE (LM_PERIPH_BASE + 0x20800) /* -0x20fff: I2C Slave 0 */
/* -0x23fff: Reserved */
# define LM_GPIOE_BASE (LM_PERIPH_BASE + 0x24000) /* -0x24fff: GPIO Port E */
# define LM_GPIOF_BASE (LM_PERIPH_BASE + 0x25000) /* -0x25fff: GPIO Port F */
# define LM_GPIOG_BASE (LM_PERIPH_BASE + 0x26000) /* -0x26fff: GPIO Port G */
/* -0x27fff: Reserved */
# define LM_PWM0_BASE (LM_PERIPH_BASE + 0x28000) /* -0x28fff: PWM */
/* -0x2bfff: Reserved */
# define LM_QEI0_BASE (LM_PERIPH_BASE + 0x2c000) /* -0x2cfff: QEI0 */
# define LM_QEI1_BASE (LM_PERIPH_BASE + 0x2d000) /* -0x2dfff: QEI1 */
/* -0x2ffff: Reserved */
# define LM_TIMER0_BASE (LM_PERIPH_BASE + 0x30000) /* -0x30fff: Timer 0 */
# define LM_TIMER1_BASE (LM_PERIPH_BASE + 0x31000) /* -0x31fff: Timer 1 */
# define LM_TIMER2_BASE (LM_PERIPH_BASE + 0x32000) /* -0x32fff: Timer 2 */
# define LM_TIMER3_BASE (LM_PERIPH_BASE + 0x33000) /* -0x33fff: Timer 3 */
/* -0x37fff: Reserved */
# define LM_ADC_BASE (LM_PERIPH_BASE + 0x38000) /* -0x38fff: ADC */
/* -0x3bfff: Reserved */
# define LM_COMPARE_BASE (LM_PERIPH_BASE + 0x3c000) /* -0x3cfff: Analog Comparators */
/* -0x3fffff: Reserved */
# define LM_CANCON_BASE (LM_PERIPH_BASE + 0x40000) /* -0x40fff: CAN Controller */
/* -0x47fff: Reserved */
# define LM_ETHCON_BASE (LM_PERIPH_BASE + 0x48000) /* -0x48fff: Ethernet Controller */
/* -0xfcfff: Reserved */
# define LM_HIBERNATE_BASE (LM_PERIPH_BASE + 0xfc000) /* -0xfcfff: Hibernation Controller */
# define LM_FLASHCON_BASE (LM_PERIPH_BASE + 0xfd000) /* -0xfdfff: FLASH Control */
# define LM_SYSCON_BASE (LM_PERIPH_BASE + 0xfe000) /* -0xfefff: System Control */
/* -0x1ffffff: Reserved */
#elif defined(CONFIG_ARCH_CHIP_LM3S9B96)
/* FiRM Peripheral Base Addresses */
# define LM_WDOG_BASE (LM_PERIPH_BASE + 0x00000) /* -0x00fff: Watchdog Timer */
/* -0x03fff: Reserved */
# define LM_GPIOA_BASE (LM_PERIPH_BASE + 0x04000) /* -0x04fff: GPIO Port A */
# define LM_GPIOB_BASE (LM_PERIPH_BASE + 0x05000) /* -0x05fff: GPIO Port B */
# define LM_GPIOC_BASE (LM_PERIPH_BASE + 0x06000) /* -0x06fff: GPIO Port C */
# define LM_GPIOD_BASE (LM_PERIPH_BASE + 0x07000) /* -0x07fff: GPIO Port D */
# define LM_SSI0_BASE (LM_PERIPH_BASE + 0x08000) /* -0x08fff: SSI0 */
# define LM_SSI1_BASE (LM_PERIPH_BASE + 0x09000) /* -0x09fff: SSI0 */
/* -0x0bfff: Reserved */
# define LM_UART0_BASE (LM_PERIPH_BASE + 0x0c000) /* -0x0cfff: UART0 */
# define LM_UART1_BASE (LM_PERIPH_BASE + 0x0d000) /* -0x0dfff: UART1 */
# define LM_UART2_BASE (LM_PERIPH_BASE + 0x0e000) /* -0x0dfff: UART2 */
/* -0x1ffff: Reserved */
/* Peripheral Base Addresses */
# define LM_I2CM0_BASE (LM_PERIPH_BASE + 0x20000) /* -0x207ff: I2C Master 0 */
# define LM_I2CS0_BASE (LM_PERIPH_BASE + 0x20800) /* -0x20fff: I2C Slave 0 */
# define LM_I2CM1_BASE (LM_PERIPH_BASE + 0x21000) /* -0x217ff: I2C Master 1 */
# define LM_I2CS1_BASE (LM_PERIPH_BASE + 0x21800) /* -0x21fff: I2C Slave 1 */
/* -0x23fff: Reserved */
# define LM_GPIOE_BASE (LM_PERIPH_BASE + 0x24000) /* -0x24fff: GPIO Port E */
# define LM_GPIOF_BASE (LM_PERIPH_BASE + 0x25000) /* -0x25fff: GPIO Port F */
# define LM_GPIOG_BASE (LM_PERIPH_BASE + 0x26000) /* -0x26fff: GPIO Port G */
# define LM_GPIOH_BASE (LM_PERIPH_BASE + 0x27000) /* -0x27fff: GPIO Port H */
# define LM_PWM0_BASE (LM_PERIPH_BASE + 0x28000) /* -0x28fff: PWM */
/* -0x2bfff: Reserved */
# define LM_QEI0_BASE (LM_PERIPH_BASE + 0x2c000) /* -0x2cfff: QEI0 */
# define LM_QEI1_BASE (LM_PERIPH_BASE + 0x2d000) /* -0x2dfff: QEI1 */
/* -0x2ffff: Reserved */
# define LM_TIMER0_BASE (LM_PERIPH_BASE + 0x30000) /* -0x30fff: Timer 0 */
# define LM_TIMER1_BASE (LM_PERIPH_BASE + 0x31000) /* -0x31fff: Timer 1 */
# define LM_TIMER2_BASE (LM_PERIPH_BASE + 0x32000) /* -0x32fff: Timer 2 */
# define LM_TIMER3_BASE (LM_PERIPH_BASE + 0x33000) /* -0x33fff: Timer 3 */
/* -0x37fff: Reserved */
# define LM_ADC0_BASE (LM_PERIPH_BASE + 0x38000) /* -0x38fff: ADC 0 */
# define LM_ADC1_BASE (LM_PERIPH_BASE + 0x39000) /* -0x39fff: ADC 1 */
/* -0x3bfff: Reserved */
# define LM_COMPARE_BASE (LM_PERIPH_BASE + 0x3c000) /* -0x3cfff: Analog Comparators */
# define LM_GPIOJ_BASE (LM_PERIPH_BASE + 0x3d000) /* -0x3dfff: GPIO Port J */
/* -0x3ffff: Reserved */
# define LM_CAN0_BASE (LM_PERIPH_BASE + 0x40000) /* -0x40fff: CAN 0 */
# define LM_CAN1_BASE (LM_PERIPH_BASE + 0x41000) /* -0x41fff: CAN 1 */
/* -0x47fff: Reserved */
# define LM_ETHCON_BASE (LM_PERIPH_BASE + 0x48000) /* -0x48fff: Ethernet Controller */
/* -0x49fff: Reserved */
# define LM_USB_BASE (LM_PERIPH_BASE + 0x50000) /* -0x50fff: USB */
/* -0x53fff: Reserved */
# define LM_I2S0_BASE (LM_PERIPH_BASE + 0x54000) /* -0x54fff: I2S 0 */
/* -0x57fff: Reserved */
# define LM_GPIOAAHB_BASE (LM_PERIPH_BASE + 0x58000) /* -0x58fff: GPIO Port A (AHB aperture) */
# define LM_GPIOBAHB_BASE (LM_PERIPH_BASE + 0x59000) /* -0x59fff: GPIO Port B (AHB aperture) */
# define LM_GPIOCAHB_BASE (LM_PERIPH_BASE + 0x5a000) /* -0x5afff: GPIO Port C (AHB aperture) */
# define LM_GPIODAHB_BASE (LM_PERIPH_BASE + 0x5b000) /* -0x5bfff: GPIO Port D (AHB aperture) */
# define LM_GPIOEAHB_BASE (LM_PERIPH_BASE + 0x5c000) /* -0x5cfff: GPIO Port E (AHB aperture) */
# define LM_GPIOFAHB_BASE (LM_PERIPH_BASE + 0x5d000) /* -0x5dfff: GPIO Port F (AHB aperture) */
# define LM_GPIOGAHB_BASE (LM_PERIPH_BASE + 0x5e000) /* -0x5efff: GPIO Port G (AHB aperture) */
# define LM_GPIOHAHB_BASE (LM_PERIPH_BASE + 0x5f000) /* -0x5ffff: GPIO Port H (AHB aperture) */
# define LM_GPIOJAHB_BASE (LM_PERIPH_BASE + 0x60000) /* -0x60fff: GPIO Port J (AHB aperture) */
/* -0xcffff: Reserved */
# define LM_EPI0_BASE (LM_PERIPH_BASE + 0xd0000) /* -0xd0fff: EPI 0 */
/* -0xfcfff: Reserved */
# define LM_FLASHCON_BASE (LM_PERIPH_BASE + 0xfd000) /* -0xfdfff: FLASH Control */
# define LM_SYSCON_BASE (LM_PERIPH_BASE + 0xfe000) /* -0xfefff: System Control */
# define LM_UDMA_BASE (LM_PERIPH_BASE + 0xff000) /* -0xfffff: Micro Direct Memory Access */
/* -0x1ffffff: Reserved */
#else
# error "Peripheral base addresses not specified for this Stellaris chip"
#endif
/************************************************************************************
* Public Types
************************************************************************************/
/************************************************************************************
* Public Data
************************************************************************************/
/************************************************************************************
* Public Function Prototypes
************************************************************************************/
#endif /* __ARCH_ARM_SRC_LM_CHIP_LM3S_MEMORYMAP_H */
|