diff options
author | philipoe <philipp.oettershagen@mavt.ethz.ch> | 2014-11-20 17:26:27 +0100 |
---|---|---|
committer | philipoe <philipp.oettershagen@mavt.ethz.ch> | 2014-11-20 17:26:27 +0100 |
commit | ec165b3f7ec5ca1d47fa1f8fcba72e8c1c72654f (patch) | |
tree | b5c5f7d4781281a8209a5580a5bb3e1268a7e6b5 | |
parent | 5c34f03c4ef1d0b928c8ad32f8038bb15dba7c11 (diff) | |
parent | 97a1410ec99e880207e4ee6d2a03451c2e11f4cf (diff) | |
download | px4-firmware-ec165b3f7ec5ca1d47fa1f8fcba72e8c1c72654f.tar.gz px4-firmware-ec165b3f7ec5ca1d47fa1f8fcba72e8c1c72654f.tar.bz2 px4-firmware-ec165b3f7ec5ca1d47fa1f8fcba72e8c1c72654f.zip |
Merge remote-tracking branch 'upstream/master' into PR_RCLossDur2
142 files changed, 2240 insertions, 754 deletions
diff --git a/Debug/NuttX b/Debug/NuttX index d34e9f5b4..4b9f4b5a1 100644 --- a/Debug/NuttX +++ b/Debug/NuttX @@ -78,7 +78,7 @@ end ################################################################################ define showfiles - set $task = (struct _TCB *)$arg0 + set $task = (struct tcb_s *)$arg0 set $nfiles = sizeof((*(struct filelist*)0).fl_files) / sizeof(struct file) printf "%d files\n", $nfiles set $index = 0 @@ -102,7 +102,7 @@ end ################################################################################ define _showtask_oneline - set $task = (struct _TCB *)$arg0 + set $task = (struct tcb_s *)$arg0 printf " %p %.2d %.3d %s\n", $task, $task->pid, $task->sched_priority, $task->name end @@ -139,7 +139,7 @@ end # Print task registers for a NuttX v7em target with FPU enabled. # define _showtaskregs_v7em - set $task = (struct _TCB *)$arg0 + set $task = (struct tcb_s *)$arg0 set $regs = (uint32_t *)&($task->xcp.regs[0]) printf " r0: 0x%08x 0x%08x 0x%08x 0x%08x 0x%08x 0x%08x 0x%08x 0x%08x\n", $regs[27], $regs[28], $regs[29], $regs[30], $regs[2], $regs[3], $regs[4], $regs[5] @@ -162,7 +162,7 @@ end define _showsemaphore printf "count %d ", $arg0->semcount if $arg0->holder.htcb != 0 - set $_task = (struct _TCB *)$arg0->holder.htcb + set $_task = (struct tcb_s *)$arg0->holder.htcb printf "held by %s", $_task->name end printf "\n" @@ -172,7 +172,7 @@ end # Print information about a task's stack usage # define showtaskstack - set $task = (struct _TCB *)$arg0 + set $task = (struct tcb_s *)$arg0 if $task == &g_idletcb printf "can't measure idle stack\n" @@ -189,7 +189,7 @@ end # Print details of a task # define showtask - set $task = (struct _TCB *)$arg0 + set $task = (struct tcb_s *)$arg0 printf "%p %.2d ", $task, $task->pid _showtaskstate $task @@ -204,7 +204,7 @@ define showtask if $task->task_state != TSTATE_TASK_RUNNING _showtaskregs_v7em $task else - _showcurrentregs_v7em + _showtaskregs_v7em $task end # XXX print registers here @@ -247,8 +247,10 @@ define showtasks _showtasklist &g_pendingtasks printf "RUNNABLE\n" _showtasklist &g_readytorun - printf "WAITING\n" + printf "WAITING for Semaphore\n" _showtasklist &g_waitingforsemaphore + printf "WAITING for Signal\n" + _showtasklist &g_waitingforsignal printf "INACTIVE\n" _showtasklist &g_inactivetasks end @@ -257,3 +259,23 @@ document showtasks . showtasks . Print a list of all tasks in the system, separated into their respective queues. end + +define my_mem + + set $start = $arg0 + set $end = $arg1 + set $cursor = $start + + if $start < $end + while $cursor != $end + set *$cursor = 0x0000 + set $cursor = $cursor + 4 + printf "0x%x of 0x%x\n",$cursor,$end + end + else + while $cursor != $end + set *$cursor = 0x0000 + set $cursor = $cursor - 4 + end + end +end
\ No newline at end of file diff --git a/Debug/Nuttx.py b/Debug/Nuttx.py index 7cc21b99f..cf86dd668 100644 --- a/Debug/Nuttx.py +++ b/Debug/Nuttx.py @@ -59,30 +59,42 @@ class NX_register_set(object): def __init__(self, xcpt_regs): if xcpt_regs is None: - self.regs['R0'] = long(gdb.parse_and_eval('$r0')) - self.regs['R1'] = long(gdb.parse_and_eval('$r1')) - self.regs['R2'] = long(gdb.parse_and_eval('$r2')) - self.regs['R3'] = long(gdb.parse_and_eval('$r3')) - self.regs['R4'] = long(gdb.parse_and_eval('$r4')) - self.regs['R5'] = long(gdb.parse_and_eval('$r5')) - self.regs['R6'] = long(gdb.parse_and_eval('$r6')) - self.regs['R7'] = long(gdb.parse_and_eval('$r7')) - self.regs['R8'] = long(gdb.parse_and_eval('$r8')) - self.regs['R9'] = long(gdb.parse_and_eval('$r9')) - self.regs['R10'] = long(gdb.parse_and_eval('$r10')) - self.regs['R11'] = long(gdb.parse_and_eval('$r11')) - self.regs['R12'] = long(gdb.parse_and_eval('$r12')) - self.regs['R13'] = long(gdb.parse_and_eval('$r13')) - self.regs['SP'] = long(gdb.parse_and_eval('$sp')) - self.regs['R14'] = long(gdb.parse_and_eval('$r14')) - self.regs['LR'] = long(gdb.parse_and_eval('$lr')) - self.regs['R15'] = long(gdb.parse_and_eval('$r15')) - self.regs['PC'] = long(gdb.parse_and_eval('$pc')) - self.regs['XPSR'] = long(gdb.parse_and_eval('$xpsr')) + self.regs['R0'] = self.mon_reg_call('r0') + self.regs['R1'] = self.mon_reg_call('r1') + self.regs['R2'] = self.mon_reg_call('r2') + self.regs['R3'] = self.mon_reg_call('r3') + self.regs['R4'] = self.mon_reg_call('r4') + self.regs['R5'] = self.mon_reg_call('r5') + self.regs['R6'] = self.mon_reg_call('r6') + self.regs['R7'] = self.mon_reg_call('r7') + self.regs['R8'] = self.mon_reg_call('r8') + self.regs['R9'] = self.mon_reg_call('r9') + self.regs['R10'] = self.mon_reg_call('r10') + self.regs['R11'] = self.mon_reg_call('r11') + self.regs['R12'] = self.mon_reg_call('r12') + self.regs['R13'] = self.mon_reg_call('r13') + self.regs['SP'] = self.mon_reg_call('sp') + self.regs['R14'] = self.mon_reg_call('r14') + self.regs['LR'] = self.mon_reg_call('lr') + self.regs['R15'] = self.mon_reg_call('r15') + self.regs['PC'] = self.mon_reg_call('pc') + self.regs['XPSR'] = self.mon_reg_call('xPSR') else: for key in self.v7em_regmap.keys(): self.regs[key] = int(xcpt_regs[self.v7em_regmap[key]]) + def mon_reg_call(self,register): + """ + register is the register as a string e.g. 'pc' + return integer containing the value of the register + """ + str_to_eval = "mon reg "+register + resp = gdb.execute(str_to_eval,to_string = True) + content = resp.split()[-1]; + try: + return int(content,16) + except: + return 0 @classmethod def with_xcpt_regs(cls, xcpt_regs): @@ -172,7 +184,7 @@ class NX_task(object): self.__dict__['stack_used'] = 0 else: stack_limit = self._tcb['adj_stack_size'] - for offset in range(0, stack_limit): + for offset in range(0, int(stack_limit)): if stack_base[offset] != 0xff: break self.__dict__['stack_used'] = stack_limit - offset @@ -187,7 +199,7 @@ class NX_task(object): def state(self): """return the name of the task's current state""" statenames = gdb.types.make_enum_dict(gdb.lookup_type('enum tstate_e')) - for name,value in statenames.iteritems(): + for name,value in statenames.items(): if value == self._tcb['task_state']: return name return 'UNKNOWN' @@ -196,16 +208,19 @@ class NX_task(object): def waiting_for(self): """return a description of what the task is waiting for, if it is waiting""" if self._state_is('TSTATE_WAIT_SEM'): - waitsem = self._tcb['waitsem'].dereference() - waitsem_holder = waitsem['holder'] - holder = NX_task.for_tcb(waitsem_holder['htcb']) - if holder is not None: - return '{}({})'.format(waitsem.address, holder.name) - else: - return '{}(<bad holder>)'.format(waitsem.address) + try: + waitsem = self._tcb['waitsem'].dereference() + waitsem_holder = waitsem['holder'] + holder = NX_task.for_tcb(waitsem_holder['htcb']) + if holder is not None: + return '{}({})'.format(waitsem.address, holder.name) + else: + return '{}(<bad holder>)'.format(waitsem.address) + except: + return 'EXCEPTION' if self._state_is('TSTATE_WAIT_SIG'): return 'signal' - return None + return "" @property def is_waiting(self): @@ -229,7 +244,7 @@ class NX_task(object): filearray = filelist['fl_files'] result = dict() for i in range(filearray.type.range()[0],filearray.type.range()[1]): - inode = long(filearray[i]['f_inode']) + inode = int(filearray[i]['f_inode']) if inode != 0: result[i] = inode return result @@ -253,7 +268,18 @@ class NX_task(object): def __str__(self): return "{}:{}".format(self.pid, self.name) - + + def showoff(self): + print("-------") + print(self.pid,end = ", ") + print(self.name,end = ", ") + print(self.state,end = ", ") + print(self.waiting_for,end = ", ") + print(self.stack_used,end = ", ") + print(self._tcb['adj_stack_size'],end = ", ") + print(self.file_descriptors) + print(self.registers) + def __format__(self, format_spec): return format_spec.format( pid = self.pid, @@ -265,7 +291,7 @@ class NX_task(object): file_descriptors = self.file_descriptors, registers = self.registers ) - + class NX_show_task (gdb.Command): """(NuttX) prints information about a task""" @@ -285,7 +311,7 @@ class NX_show_task (gdb.Command): my_fmt += ' R8 {registers[R8]:#010x} {registers[R9]:#010x} {registers[R10]:#010x} {registers[R11]:#010x}\n' my_fmt += ' R12 {registers[PC]:#010x}\n' my_fmt += ' SP {registers[SP]:#010x} LR {registers[LR]:#010x} PC {registers[PC]:#010x} XPSR {registers[XPSR]:#010x}\n' - print format(t, my_fmt) + print(format(t, my_fmt)) class NX_show_tasks (gdb.Command): """(NuttX) prints a list of tasks""" @@ -295,8 +321,10 @@ class NX_show_tasks (gdb.Command): def invoke(self, args, from_tty): tasks = NX_task.tasks() + print ('Number of tasks: ' + str(len(tasks))) for t in tasks: - print format(t, '{pid:<2} {name:<16} {state:<20} {stack_used:>4}/{stack_limit:<4}') + #t.showoff() + print(format(t, 'Task: {pid} {name} {state} {stack_used}/{stack_limit}')) NX_show_task() NX_show_tasks() @@ -306,15 +334,15 @@ class NX_show_heap (gdb.Command): def __init__(self): super(NX_show_heap, self).__init__('show heap', gdb.COMMAND_USER) - struct_mm_allocnode_s = gdb.lookup_type('struct mm_allocnode_s') - preceding_size = struct_mm_allocnode_s['preceding'].type.sizeof - if preceding_size == 2: + struct_mm_allocnode_s = gdb.lookup_type('struct mm_allocnode_s') + preceding_size = struct_mm_allocnode_s['preceding'].type.sizeof + if preceding_size == 2: self._allocflag = 0x8000 - elif preceding_size == 4: + elif preceding_size == 4: self._allocflag = 0x80000000 - else: - raise gdb.GdbError('invalid mm_allocnode_s.preceding size %u' % preceding_size) - self._allocnodesize = struct_mm_allocnode_s.sizeof + else: + raise gdb.GdbError('invalid mm_allocnode_s.preceding size %u' % preceding_size) + self._allocnodesize = struct_mm_allocnode_s.sizeof def _node_allocated(self, allocnode): if allocnode['preceding'] & self._allocflag: @@ -328,7 +356,7 @@ class NX_show_heap (gdb.Command): if region_start >= region_end: raise gdb.GdbError('heap region {} corrupt'.format(hex(region_start))) nodecount = region_end - region_start - print 'heap {} - {}'.format(region_start, region_end) + print ('heap {} - {}'.format(region_start, region_end)) cursor = 1 while cursor < nodecount: allocnode = region_start[cursor] @@ -336,8 +364,8 @@ class NX_show_heap (gdb.Command): state = '' else: state = '(free)' - print ' {} {} {}'.format(allocnode.address + self._allocnodesize, - self._node_size(allocnode), state) + print( ' {} {} {}'.format(allocnode.address + self._allocnodesize, + self._node_size(allocnode), state)) cursor += self._node_size(allocnode) / self._allocnodesize def invoke(self, args, from_tty): @@ -345,7 +373,7 @@ class NX_show_heap (gdb.Command): nregions = heap['mm_nregions'] region_starts = heap['mm_heapstart'] region_ends = heap['mm_heapend'] - print '{} heap(s)'.format(nregions) + print( '{} heap(s)'.format(nregions)) # walk the heaps for i in range(0, nregions): self._print_allocations(region_starts[i], region_ends[i]) @@ -370,6 +398,317 @@ class NX_show_interrupted_thread (gdb.Command): my_fmt += ' R8 {registers[R8]:#010x} {registers[R9]:#010x} {registers[R10]:#010x} {registers[R11]:#010x}\n' my_fmt += ' R12 {registers[PC]:#010x}\n' my_fmt += ' SP {registers[SP]:#010x} LR {registers[LR]:#010x} PC {registers[PC]:#010x} XPSR {registers[XPSR]:#010x}\n' - print format(registers, my_fmt) + print (format(registers, my_fmt)) NX_show_interrupted_thread() + +class NX_check_tcb(gdb.Command): + """ check the tcb of a task from a address """ + def __init__(self): + super(NX_check_tcb,self).__init__('show tcb', gdb.COMMAND_USER) + + def invoke(self,args,sth): + tasks = NX_task.tasks() + print("tcb int: ",int(args)) + print(tasks[int(args)]._tcb) + a =tasks[int(args)]._tcb['xcp']['regs'] + print("relevant registers:") + for reg in regmap: + hex_addr= hex(int(a[regmap[reg]])) + eval_string = 'info line *'+str(hex_addr) + print(reg,": ",hex_addr,) +NX_check_tcb() + +class NX_tcb(object): + def __init__(self): + pass + + def is_in(self,arg,list): + for i in list: + if arg == i: + return True; + return False + + def find_tcb_list(self,dq_entry_t): + tcb_list = [] + tcb_ptr = dq_entry_t.cast(gdb.lookup_type('struct tcb_s').pointer()) + first_tcb = tcb_ptr.dereference() + tcb_list.append(first_tcb); + next_tcb = first_tcb['flink'].dereference() + while not self.is_in(int(next_tcb['pid']),[int(t['pid']) for t in tcb_list]): + tcb_list.append(next_tcb); + old_tcb = next_tcb; + next_tcb = old_tcb['flink'].dereference() + + return [t for t in tcb_list if int(t['pid'])<2000] + + def getTCB(self): + list_of_listsnames = ['g_pendingtasks','g_readytorun','g_waitingforsemaphore','g_waitingforsignal','g_inactivetasks'] + tcb_list = []; + for l in list_of_listsnames: + li = gdb.lookup_global_symbol(l) + print(li) + cursor = li.value()['head'] + tcb_list = tcb_list + self.find_tcb_list(cursor) + +class NX_check_stack_order(gdb.Command): + """ Check the Stack order corresponding to the tasks """ + + def __init__(self): + super(NX_check_stack_order,self).__init__('show check_stack', gdb.COMMAND_USER) + + def is_in(self,arg,list): + for i in list: + if arg == i: + return True; + return False + + def find_tcb_list(self,dq_entry_t): + tcb_list = [] + tcb_ptr = dq_entry_t.cast(gdb.lookup_type('struct tcb_s').pointer()) + first_tcb = tcb_ptr.dereference() + tcb_list.append(first_tcb); + next_tcb = first_tcb['flink'].dereference() + while not self.is_in(int(next_tcb['pid']),[int(t['pid']) for t in tcb_list]): + tcb_list.append(next_tcb); + old_tcb = next_tcb; + next_tcb = old_tcb['flink'].dereference() + + return [t for t in tcb_list if int(t['pid'])<2000] + + def getTCB(self): + list_of_listsnames = ['g_pendingtasks','g_readytorun','g_waitingforsemaphore','g_waitingforsignal','g_inactivetasks'] + tcb_list = []; + for l in list_of_listsnames: + li = gdb.lookup_global_symbol(l) + cursor = li.value()['head'] + tcb_list = tcb_list + self.find_tcb_list(cursor) + return tcb_list + + def getSPfromTask(self,tcb): + regmap = NX_register_set.v7em_regmap + a =tcb['xcp']['regs'] + return int(a[regmap['SP']]) + + def find_closest(self,list,val): + tmp_list = [abs(i-val) for i in list] + tmp_min = min(tmp_list) + idx = tmp_list.index(tmp_min) + return idx,list[idx] + + def find_next_stack(self,address,_dict_in): + add_list = [] + name_list = [] + for key in _dict_in.keys(): + for i in range(3): + if _dict_in[key][i] < address: + add_list.append(_dict_in[key][i]) + if i == 2: # the last one is the processes stack pointer + name_list.append(self.check_name(key)+"_SP") + else: + name_list.append(self.check_name(key)) + + idx,new_address = self.find_closest(add_list,address) + return new_address,name_list[idx] + + def check_name(self,name): + if isinstance(name,(list)): + name = name[0]; + idx = name.find("\\") + newname = name[:idx] + + return newname + + def invoke(self,args,sth): + tcb = self.getTCB(); + stackadresses={}; + for t in tcb: + p = []; + #print(t.name,t._tcb['stack_alloc_ptr']) + p.append(int(t['stack_alloc_ptr'])) + p.append(int(t['adj_stack_ptr'])) + p.append(self.getSPfromTask(t)) + stackadresses[str(t['name'])] = p; + address = int("0x30000000",0) + print("stack address : process") + for i in range(len(stackadresses)*3): + address,name = self.find_next_stack(address,stackadresses) + print(hex(address),": ",name) + +NX_check_stack_order() + +class NX_run_debug_util(gdb.Command): + """ show the registers of a task corresponding to a tcb address""" + def __init__(self): + super(NX_run_debug_util,self).__init__('show regs', gdb.COMMAND_USER) + + def printRegisters(self,task): + regmap = NX_register_set.v7em_regmap + a =task._tcb['xcp']['regs'] + print("relevant registers in ",task.name,":") + for reg in regmap: + hex_addr= hex(int(a[regmap[reg]])) + eval_string = 'info line *'+str(hex_addr) + print(reg,": ",hex_addr,) + + def getPCfromTask(self,task): + regmap = NX_register_set.v7em_regmap + a =task._tcb['xcp']['regs'] + return hex(int(a[regmap['PC']])) + + def invoke(self,args,sth): + tasks = NX_task.tasks() + if args == '': + for t in tasks: + self.printRegisters(t) + eval_str = "list *"+str(self.getPCfromTask(t)) + print("this is the location in code where the current threads $pc is:") + gdb.execute(eval_str) + else: + tcb_nr = int(args); + print("tcb_nr = ",tcb_nr) + t = tasks[tcb_nr] + self.printRegisters(t) + eval_str = "list *"+str(self.getPCfromTask(t)) + print("this is the location in code where the current threads $pc is:") + gdb.execute(eval_str) + +NX_run_debug_util() + + +class NX_search_tcb(gdb.Command): + """ shot PID's of all running tasks """ + + def __init__(self): + super(NX_search_tcb,self).__init__('show alltcb', gdb.COMMAND_USER) + + def is_in(self,arg,list): + for i in list: + if arg == i: + return True; + return False + + def find_tcb_list(self,dq_entry_t): + tcb_list = [] + tcb_ptr = dq_entry_t.cast(gdb.lookup_type('struct tcb_s').pointer()) + first_tcb = tcb_ptr.dereference() + tcb_list.append(first_tcb); + next_tcb = first_tcb['flink'].dereference() + while not self.is_in(int(next_tcb['pid']),[int(t['pid']) for t in tcb_list]): + tcb_list.append(next_tcb); + old_tcb = next_tcb; + next_tcb = old_tcb['flink'].dereference() + + return [t for t in tcb_list if int(t['pid'])<2000] + + def invoke(self,args,sth): + list_of_listsnames = ['g_pendingtasks','g_readytorun','g_waitingforsemaphore','g_waitingforsignal','g_inactivetasks'] + tasks = []; + for l in list_of_listsnames: + li = gdb.lookup_global_symbol(l) + cursor = li.value()['head'] + tasks = tasks + self.find_tcb_list(cursor) + + # filter for tasks that are listed twice + tasks_filt = {} + for t in tasks: + pid = int(t['pid']); + if not pid in tasks_filt.keys(): + tasks_filt[pid] = t['name']; + print('{num_t} Tasks found:'.format(num_t = len(tasks_filt))) + for pid in tasks_filt.keys(): + print("PID: ",pid," ",tasks_filt[pid]) + +NX_search_tcb() + + +class NX_my_bt(gdb.Command): + """ 'fake' backtrace: backtrace the stack of a process and check every suspicious address for the list + arg: tcb_address$ + (can easily be found by typing 'showtask'). + """ + + def __init__(self): + super(NX_my_bt,self).__init__('show mybt', gdb.COMMAND_USER) + + def readmem(self,addr): + ''' + read memory at addr and return nr + ''' + str_to_eval = "x/x "+hex(addr) + resp = gdb.execute(str_to_eval,to_string = True) + idx = resp.find('\t') + return int(resp[idx:],16) + + def is_in_bounds(self,val): + lower_bound = int("08004000",16) + upper_bound = int("080ae0c0",16); + #print(lower_bound," ",val," ",upper_bound) + if val>lower_bound and val<upper_bound: + return True; + else: + return False; + def get_tcb_from_address(self,addr): + addr_value = gdb.Value(addr) + tcb_ptr = addr_value.cast(gdb.lookup_type('struct tcb_s').pointer()) + return tcb_ptr.dereference() + + def print_instruction_at(self,addr,stack_percentage): + gdb.write(str(round(stack_percentage,2))+":") + str_to_eval = "info line *"+hex(addr) + #gdb.execute(str_to_eval) + res = gdb.execute(str_to_eval,to_string = True) + # get information from results string: + words = res.split() + valid = False + if words[0] == 'No': + #no line info... + pass + else: + valid = True + line = int(words[1]) + idx = words[3].rfind("/"); #find first backslash + if idx>0: + name = words[3][idx+1:]; + path = words[3][:idx]; + else: + name = words[3]; + path = ""; + block = gdb.block_for_pc(addr) + func = block.function + if str(func) == "None": + func = block.superblock.function + + if valid: + print("Line: ",line," in ",path,"/",name,"in ",func) + return name,path,line,func + + + + + def invoke(self,args,sth): + addr_dec = int(args[2:],16) + _tcb = self.get_tcb_from_address(addr_dec) + print("found task with PID: ",_tcb["pid"]) + up_stack = int(_tcb['adj_stack_ptr']) + curr_sp = int(_tcb['xcp']['regs'][0]) #curr stack pointer + other_sp = int(_tcb['xcp']['regs'][8]) # other stack pointer + stacksize = int(_tcb['adj_stack_size']) # other stack pointer + + print("tasks current SP = ",hex(curr_sp),"stack max ptr is at ",hex(up_stack)) + + if curr_sp == up_stack: + sp = other_sp + else: + sp = curr_sp; + + while(sp < up_stack): + mem = self.readmem(sp) + #print(hex(sp)," : ",hex(mem)) + if self.is_in_bounds(mem): + # this is a potential instruction ptr + stack_percentage = (up_stack-sp)/stacksize + name,path,line,func = self.print_instruction_at(mem,stack_percentage) + sp = sp + 4; # jump up one word + +NX_my_bt() diff --git a/Documentation/versionfilter.sh b/Documentation/versionfilter.sh index a887d8bc4..a887d8bc4 100644..100755 --- a/Documentation/versionfilter.sh +++ b/Documentation/versionfilter.sh diff --git a/NuttX b/NuttX -Subproject 41fffa0df192e4a26d2325c7ac5d9b5d7ba0211 +Subproject 9d06b645790e1445f14e3b19c71d40b3088f4e4 diff --git a/ROMFS/px4fmu_common/init.d/1000_rc_fw_easystar.hil b/ROMFS/px4fmu_common/init.d/1000_rc_fw_easystar.hil index d114fe21a..4d6d350b8 100644 --- a/ROMFS/px4fmu_common/init.d/1000_rc_fw_easystar.hil +++ b/ROMFS/px4fmu_common/init.d/1000_rc_fw_easystar.hil @@ -1,14 +1,10 @@ #!nsh # -# HILStar / X-Plane -# -# Lorenz Meier <lm@inf.ethz.ch> +# HILStar +# <lorenz@px4.io> # sh /etc/init.d/rc.fw_defaults -echo "X Plane HIL starting.." - set HIL yes - set MIXER FMU_AERT diff --git a/ROMFS/px4fmu_common/init.d/10015_tbs_discovery b/ROMFS/px4fmu_common/init.d/10015_tbs_discovery index c4be16943..c8379e3a1 100644 --- a/ROMFS/px4fmu_common/init.d/10015_tbs_discovery +++ b/ROMFS/px4fmu_common/init.d/10015_tbs_discovery @@ -2,7 +2,7 @@ # # Team Blacksheep Discovery Quadcopter # -# Anton Babushkin <anton.babushkin@me.com>, Simon Wilks <sjwilks@gmail.com>, Thomas Gubler <thomasgubler@gmail.com> +# Anton Babushkin <anton@px4.io>, Simon Wilks <simon@px4.io> # sh /etc/init.d/rc.mc_defaults @@ -27,3 +27,4 @@ fi set MIXER FMU_quad_w set PWM_OUTPUTS 1234 +set PWM_MIN 1200 diff --git a/ROMFS/px4fmu_common/init.d/10016_3dr_iris b/ROMFS/px4fmu_common/init.d/10016_3dr_iris index 3f47390c1..0b422de7e 100644 --- a/ROMFS/px4fmu_common/init.d/10016_3dr_iris +++ b/ROMFS/px4fmu_common/init.d/10016_3dr_iris @@ -2,7 +2,7 @@ # # 3DR Iris Quadcopter # -# Anton Babushkin <anton.babushkin@me.com> +# Anton Babushkin <anton@px4.io> # sh /etc/init.d/rc.mc_defaults diff --git a/ROMFS/px4fmu_common/init.d/10017_steadidrone_qu4d b/ROMFS/px4fmu_common/init.d/10017_steadidrone_qu4d index 6179855f6..a621de7ce 100644 --- a/ROMFS/px4fmu_common/init.d/10017_steadidrone_qu4d +++ b/ROMFS/px4fmu_common/init.d/10017_steadidrone_qu4d @@ -2,8 +2,7 @@ # # Steadidrone QU4D # -# Thomas Gubler <thomasgubler@gmail.com> -# Lorenz Meier <lm@inf.ethz.ch> +# Thomas Gubler <thomas@px4.io> # sh /etc/init.d/rc.mc_defaults diff --git a/ROMFS/px4fmu_common/init.d/1001_rc_quad_x.hil b/ROMFS/px4fmu_common/init.d/1001_rc_quad_x.hil index 7a7a9542c..1c4f6803b 100644 --- a/ROMFS/px4fmu_common/init.d/1001_rc_quad_x.hil +++ b/ROMFS/px4fmu_common/init.d/1001_rc_quad_x.hil @@ -2,7 +2,7 @@ # # HIL Quadcopter X # -# Anton Babushkin <anton.babushkin@me.com> +# Anton Babushkin <anton@px4.io> # sh /etc/init.d/rc.mc_defaults diff --git a/ROMFS/px4fmu_common/init.d/1003_rc_quad_+.hil b/ROMFS/px4fmu_common/init.d/1003_rc_quad_+.hil index c47500c7a..0cbdd75be 100644 --- a/ROMFS/px4fmu_common/init.d/1003_rc_quad_+.hil +++ b/ROMFS/px4fmu_common/init.d/1003_rc_quad_+.hil @@ -2,7 +2,7 @@ # # HIL Quadcopter + # -# Anton Babushkin <anton.babushkin@me.com> +# Anton Babushkin <anton@px4.io> # sh /etc/init.d/rc.mc_defaults diff --git a/ROMFS/px4fmu_common/init.d/1004_rc_fw_Rascal110.hil b/ROMFS/px4fmu_common/init.d/1004_rc_fw_Rascal110.hil index 4e3e18326..fb440d2fc 100644 --- a/ROMFS/px4fmu_common/init.d/1004_rc_fw_Rascal110.hil +++ b/ROMFS/px4fmu_common/init.d/1004_rc_fw_Rascal110.hil @@ -2,13 +2,11 @@ # # HIL Rascal 110 (Flightgear) # -# Thomas Gubler <thomasgubler@gmail.com> +# Thomas Gubler <thomas@px4.io> # sh /etc/init.d/rc.fw_defaults -echo "HIL Rascal 110 starting.." - set HIL yes set MIXER FMU_AERT diff --git a/ROMFS/px4fmu_common/init.d/1005_rc_fw_Malolo1.hil b/ROMFS/px4fmu_common/init.d/1005_rc_fw_Malolo1.hil index 941f5664a..00b97d675 100644 --- a/ROMFS/px4fmu_common/init.d/1005_rc_fw_Malolo1.hil +++ b/ROMFS/px4fmu_common/init.d/1005_rc_fw_Malolo1.hil @@ -2,7 +2,7 @@ # # HIL Malolo 1 (Flightgear) # -# Thomas Gubler <thomasgubler@gmail.com> +# Thomas Gubler <thomas@px4.io> # sh /etc/init.d/rc.fw_defaults diff --git a/ROMFS/px4fmu_common/init.d/11001_hexa_cox b/ROMFS/px4fmu_common/init.d/11001_hexa_cox index daa04a4de..e4d96fbd5 100644 --- a/ROMFS/px4fmu_common/init.d/11001_hexa_cox +++ b/ROMFS/px4fmu_common/init.d/11001_hexa_cox @@ -2,12 +2,12 @@ # # Generic 10" Hexa coaxial geometry # -# Lorenz Meier <lm@inf.ethz.ch> +# Lorenz Meier <lorenz@px4.io> # sh /etc/init.d/rc.mc_defaults set MIXER FMU_hexa_cox -# We only can run one channel group with one rate, so set all 8 channels +# Need to set all 8 channels set PWM_OUTPUTS 12345678 diff --git a/ROMFS/px4fmu_common/init.d/12001_octo_cox b/ROMFS/px4fmu_common/init.d/12001_octo_cox index 8703f5f2f..f820251ad 100644 --- a/ROMFS/px4fmu_common/init.d/12001_octo_cox +++ b/ROMFS/px4fmu_common/init.d/12001_octo_cox @@ -2,7 +2,7 @@ # # Generic 10" Octo coaxial geometry # -# Lorenz Meier <lm@inf.ethz.ch> +# Lorenz Meier <lorenz@px4.io> # sh /etc/init.d/rc.mc_defaults diff --git a/ROMFS/px4fmu_common/init.d/3030_io_camflyer b/ROMFS/px4fmu_common/init.d/3030_io_camflyer index 83c470234..0f0cb3a89 100644 --- a/ROMFS/px4fmu_common/init.d/3030_io_camflyer +++ b/ROMFS/px4fmu_common/init.d/3030_io_camflyer @@ -3,3 +3,6 @@ sh /etc/init.d/rc.fw_defaults set MIXER FMU_Q +# Provide ESC a constant 1000 us pulse while disarmed +set PWM_OUTPUTS 4 +set PWM_DISARMED 1000 diff --git a/ROMFS/px4fmu_common/init.d/3031_phantom b/ROMFS/px4fmu_common/init.d/3031_phantom index 53c48d8aa..a7749cba6 100644 --- a/ROMFS/px4fmu_common/init.d/3031_phantom +++ b/ROMFS/px4fmu_common/init.d/3031_phantom @@ -2,7 +2,7 @@ # # Phantom FPV Flying Wing # -# Simon Wilks <sjwilks@gmail.com>, Thomas Gubler <thomasgubler@gmail.com> +# Simon Wilks <simon@px4.io> # sh /etc/init.d/rc.fw_defaults @@ -21,8 +21,6 @@ then param set FW_PR_P 0.03 param set FW_P_LIM_MAX 50 param set FW_P_LIM_MIN -50 - param set FW_P_RMAX_NEG 0 - param set FW_P_RMAX_POS 0 param set FW_P_ROLLFF 1 param set FW_RR_FF 0.5 param set FW_RR_I 0.02 diff --git a/ROMFS/px4fmu_common/init.d/3032_skywalker_x5 b/ROMFS/px4fmu_common/init.d/3032_skywalker_x5 index 7d0dc5bff..26c7c95e6 100644 --- a/ROMFS/px4fmu_common/init.d/3032_skywalker_x5 +++ b/ROMFS/px4fmu_common/init.d/3032_skywalker_x5 @@ -2,7 +2,7 @@ # # Skywalker X5 Flying Wing # -# Thomas Gubler <thomasgubler@gmail.com>, Julian Oes <joes@student.ethz.ch> +# Thomas Gubler <thomas@px4.io>, Julian Oes <julian@px4.io> # sh /etc/init.d/rc.fw_defaults @@ -19,10 +19,6 @@ then param set FW_PR_I 0 param set FW_PR_IMAX 0.2 param set FW_PR_P 0.03 - param set FW_P_LIM_MAX 45 - param set FW_P_LIM_MIN -45 - param set FW_P_RMAX_NEG 0 - param set FW_P_RMAX_POS 0 param set FW_P_ROLLFF 1 param set FW_RR_FF 0.3 param set FW_RR_I 0 diff --git a/ROMFS/px4fmu_common/init.d/3033_wingwing b/ROMFS/px4fmu_common/init.d/3033_wingwing index f4dedef15..919eefb4a 100644 --- a/ROMFS/px4fmu_common/init.d/3033_wingwing +++ b/ROMFS/px4fmu_common/init.d/3033_wingwing @@ -2,7 +2,7 @@ # # Wing Wing (aka Z-84) Flying Wing # -# Simon Wilks <sjwilks@gmail.com> +# Simon Wilks <simon@px4.io> # sh /etc/init.d/rc.fw_defaults diff --git a/ROMFS/px4fmu_common/init.d/3034_fx79 b/ROMFS/px4fmu_common/init.d/3034_fx79 index f4bd18269..4a76ba6eb 100644 --- a/ROMFS/px4fmu_common/init.d/3034_fx79 +++ b/ROMFS/px4fmu_common/init.d/3034_fx79 @@ -2,7 +2,7 @@ # # FX-79 Buffalo Flying Wing # -# Simon Wilks <sjwilks@gmail.com> +# Simon Wilks <simon@px4.io> # sh /etc/init.d/rc.fw_defaults diff --git a/ROMFS/px4fmu_common/init.d/3035_viper b/ROMFS/px4fmu_common/init.d/3035_viper index f3b0e8418..0f5f5502a 100644 --- a/ROMFS/px4fmu_common/init.d/3035_viper +++ b/ROMFS/px4fmu_common/init.d/3035_viper @@ -2,7 +2,7 @@ # # Viper # -# Simon Wilks <sjwilks@gmail.com> +# Simon Wilks <simon@px4.io> # sh /etc/init.d/rc.fw_defaults diff --git a/ROMFS/px4fmu_common/init.d/3100_tbs_caipirinha b/ROMFS/px4fmu_common/init.d/3100_tbs_caipirinha index 9a2150403..9bfd9d9ed 100644 --- a/ROMFS/px4fmu_common/init.d/3100_tbs_caipirinha +++ b/ROMFS/px4fmu_common/init.d/3100_tbs_caipirinha @@ -1,8 +1,8 @@ #!nsh # -# TBS Caipirinha Flying Wing +# TBS Caipirinha # -# Thomas Gubler <thomasgubler@gmail.com> +# Thomas Gubler <thomas@px4.io> # sh /etc/init.d/rc.fw_defaults @@ -22,10 +22,6 @@ then param set FW_PR_I 0 param set FW_PR_IMAX 0.2 param set FW_PR_P 0.03 - param set FW_P_LIM_MAX 45 - param set FW_P_LIM_MIN -45 - param set FW_P_RMAX_NEG 0 - param set FW_P_RMAX_POS 0 param set FW_P_ROLLFF 0 param set FW_RR_FF 0.3 param set FW_RR_I 0 diff --git a/ROMFS/px4fmu_common/init.d/4001_quad_x b/ROMFS/px4fmu_common/init.d/4001_quad_x index 06c54a41d..8fe8961c5 100644 --- a/ROMFS/px4fmu_common/init.d/4001_quad_x +++ b/ROMFS/px4fmu_common/init.d/4001_quad_x @@ -2,7 +2,7 @@ # # Generic 10" Quad X geometry # -# Lorenz Meier <lm@inf.ethz.ch> +# Lorenz Meier <lorenz@px4.io> # sh /etc/init.d/rc.mc_defaults diff --git a/ROMFS/px4fmu_common/init.d/4008_ardrone b/ROMFS/px4fmu_common/init.d/4008_ardrone index e6007db0e..0488e3928 100644 --- a/ROMFS/px4fmu_common/init.d/4008_ardrone +++ b/ROMFS/px4fmu_common/init.d/4008_ardrone @@ -3,9 +3,6 @@ # ARDrone # -echo "[init] 4008_ardrone: PX4FMU on PX4IOAR carrier board" - -# Just use the default multicopter settings. sh /etc/init.d/rc.mc_defaults # diff --git a/ROMFS/px4fmu_common/init.d/4010_dji_f330 b/ROMFS/px4fmu_common/init.d/4010_dji_f330 index 282ab620d..f0cc05207 100644 --- a/ROMFS/px4fmu_common/init.d/4010_dji_f330 +++ b/ROMFS/px4fmu_common/init.d/4010_dji_f330 @@ -1,8 +1,8 @@ #!nsh # -# DJI Flame Wheel F330 Quadcopter +# DJI Flame Wheel F330 # -# Anton Babushkin <anton.babushkin@me.com> +# Anton Babushkin <anton@px4.io> # sh /etc/init.d/4001_quad_x diff --git a/ROMFS/px4fmu_common/init.d/4011_dji_f450 b/ROMFS/px4fmu_common/init.d/4011_dji_f450 index 517b4aa86..1ca716a6b 100644 --- a/ROMFS/px4fmu_common/init.d/4011_dji_f450 +++ b/ROMFS/px4fmu_common/init.d/4011_dji_f450 @@ -1,8 +1,8 @@ #!nsh # -# DJI Flame Wheel F450 Quadcopter +# DJI Flame Wheel F450 # -# Lorenz Meier <lm@inf.ethz.ch> +# Lorenz Meier <lorenz@px4.io> # sh /etc/init.d/4001_quad_x diff --git a/ROMFS/px4fmu_common/init.d/4012_quad_x_can b/ROMFS/px4fmu_common/init.d/4012_quad_x_can index 8c5a4fbf2..5c4a6497a 100644 --- a/ROMFS/px4fmu_common/init.d/4012_quad_x_can +++ b/ROMFS/px4fmu_common/init.d/4012_quad_x_can @@ -2,7 +2,7 @@ # # F450-sized quadrotor with CAN # -# Lorenz Meier <lm@inf.ethz.ch> +# Pavel Kirienko <pavel@px4.io> # sh /etc/init.d/4001_quad_x diff --git a/ROMFS/px4fmu_common/init.d/4020_hk_micro_pcb b/ROMFS/px4fmu_common/init.d/4020_hk_micro_pcb index 99ffd73a5..9fe310dde 100644 --- a/ROMFS/px4fmu_common/init.d/4020_hk_micro_pcb +++ b/ROMFS/px4fmu_common/init.d/4020_hk_micro_pcb @@ -3,7 +3,7 @@ # Hobbyking Micro Integrated PCB Quadcopter # with SimonK ESC firmware and Mystery A1510 motors # -# Thomas Gubler <thomasgubler@gmail.com> +# Thomas Gubler <thomas@px4.io> # echo "HK Micro PCB Quad" diff --git a/ROMFS/px4fmu_common/init.d/5001_quad_+ b/ROMFS/px4fmu_common/init.d/5001_quad_+ index 1fb25e5d8..5512aa738 100644 --- a/ROMFS/px4fmu_common/init.d/5001_quad_+ +++ b/ROMFS/px4fmu_common/init.d/5001_quad_+ @@ -2,7 +2,7 @@ # # Generic 10" Quad + geometry # -# Anton Babushkin <anton.babushkin@me.com> +# Anton Babushkin <anton@px4.io> # sh /etc/init.d/rc.mc_defaults diff --git a/ROMFS/px4fmu_common/init.d/6001_hexa_x b/ROMFS/px4fmu_common/init.d/6001_hexa_x index 34fc6523f..1043ad8ad 100644 --- a/ROMFS/px4fmu_common/init.d/6001_hexa_x +++ b/ROMFS/px4fmu_common/init.d/6001_hexa_x @@ -2,12 +2,12 @@ # # Generic 10" Hexa X geometry # -# Anton Babushkin <anton.babushkin@me.com> +# Anton Babushkin <anton@px4.io> # sh /etc/init.d/rc.mc_defaults set MIXER FMU_hexa_x -# We only can run one channel group with one rate, so set all 8 channels +# Need to set all 8 channels set PWM_OUTPUTS 12345678 diff --git a/ROMFS/px4fmu_common/init.d/7001_hexa_+ b/ROMFS/px4fmu_common/init.d/7001_hexa_+ index 235e376a6..84ab88883 100644 --- a/ROMFS/px4fmu_common/init.d/7001_hexa_+ +++ b/ROMFS/px4fmu_common/init.d/7001_hexa_+ @@ -2,12 +2,12 @@ # # Generic 10" Hexa + geometry # -# Anton Babushkin <anton.babushkin@me.com> +# Anton Babushkin <anton@px4.io> # sh /etc/init.d/rc.mc_defaults set MIXER FMU_hexa_+ -# We only can run one channel group with one rate, so set all 8 channels +# Need to set all 8 channels set PWM_OUTPUTS 12345678 diff --git a/ROMFS/px4fmu_common/init.d/8001_octo_x b/ROMFS/px4fmu_common/init.d/8001_octo_x index 769217dc7..74e304cd9 100644 --- a/ROMFS/px4fmu_common/init.d/8001_octo_x +++ b/ROMFS/px4fmu_common/init.d/8001_octo_x @@ -2,7 +2,7 @@ # # Generic 10" Octo X geometry # -# Anton Babushkin <anton.babushkin@me.com> +# Anton Babushkin <anton@px4.io> # sh /etc/init.d/rc.mc_defaults diff --git a/ROMFS/px4fmu_common/init.d/9001_octo_+ b/ROMFS/px4fmu_common/init.d/9001_octo_+ index 28b074a54..f7c06c6c8 100644 --- a/ROMFS/px4fmu_common/init.d/9001_octo_+ +++ b/ROMFS/px4fmu_common/init.d/9001_octo_+ @@ -2,7 +2,7 @@ # # Generic 10" Octo + geometry # -# Anton Babushkin <anton.babushkin@me.com> +# Anton Babushkin <anton@px4.io> # sh /etc/init.d/rc.mc_defaults diff --git a/ROMFS/px4fmu_common/init.d/rc.autostart b/ROMFS/px4fmu_common/init.d/rc.autostart index 78778d806..496a52c5f 100644 --- a/ROMFS/px4fmu_common/init.d/rc.autostart +++ b/ROMFS/px4fmu_common/init.d/rc.autostart @@ -1,5 +1,4 @@ # -# Check if auto-setup from one of the standard scripts is wanted # SYS_AUTOSTART = 0 means no autostart (default) # # AUTOSTART PARTITION: @@ -18,7 +17,7 @@ # 12000 .. 12999 Octo Cox # -# Simulation setups +# Simulation # if param compare SYS_AUTOSTART 901 @@ -53,7 +52,7 @@ then fi # -# Standard plane +# Plane # if param compare SYS_AUTOSTART 2100 100 diff --git a/ROMFS/px4fmu_common/init.d/rc.jig b/ROMFS/px4fmu_common/init.d/rc.jig deleted file mode 100644 index e2b5d8f30..000000000 --- a/ROMFS/px4fmu_common/init.d/rc.jig +++ /dev/null @@ -1,10 +0,0 @@ -#!nsh -# -# Test jig startup script -# - -echo "[testing] doing production test.." - -tests jig - -echo "[testing] testing done" diff --git a/ROMFS/px4fmu_common/init.d/rc.sensors b/ROMFS/px4fmu_common/init.d/rc.sensors index 739df7ac0..fbac50cf7 100644 --- a/ROMFS/px4fmu_common/init.d/rc.sensors +++ b/ROMFS/px4fmu_common/init.d/rc.sensors @@ -54,7 +54,6 @@ then fi fi -# Start airspeed sensors if meas_airspeed start then echo "[init] Using MEAS airspeed sensor" @@ -68,16 +67,12 @@ else fi fi -# Check for flow sensor if px4flow start then fi # -# Start the sensor collection task. -# IMPORTANT: this also loads param offsets -# ALWAYS start this task before the -# preflight_check. +# Start sensors -> preflight_check # if sensors start then diff --git a/ROMFS/px4fmu_common/init.d/rcS b/ROMFS/px4fmu_common/init.d/rcS index ea04ece34..f9c822635 100644 --- a/ROMFS/px4fmu_common/init.d/rcS +++ b/ROMFS/px4fmu_common/init.d/rcS @@ -137,9 +137,7 @@ then # if param compare SYS_AUTOCONFIG 1 then - # We can't be sure the defaults haven't changed, so - # if someone requests a re-configuration, we do it - # cleanly from scratch (except autostart / autoconfig) + # Wipe out params param reset_nostart set DO_AUTOCONFIG yes else @@ -202,12 +200,10 @@ then if px4io checkcrc $IO_FILE then - echo "[init] PX4IO CRC OK" echo "PX4IO CRC OK" >> $LOG_FILE set IO_PRESENT yes else - echo "[init] Trying to update" echo "PX4IO Trying to update" >> $LOG_FILE tone_alarm MLL32CP8MB @@ -217,18 +213,15 @@ then usleep 500000 if px4io checkcrc $IO_FILE then - echo "[init] PX4IO CRC OK, update successful" echo "PX4IO CRC OK after updating" >> $LOG_FILE tone_alarm MLL8CDE set IO_PRESENT yes else - echo "[init] ERROR: PX4IO update failed" echo "PX4IO update failed" >> $LOG_FILE tone_alarm $TUNE_OUT_ERROR fi else - echo "[init] ERROR: PX4IO update failed" echo "PX4IO update failed" >> $LOG_FILE tone_alarm $TUNE_OUT_ERROR fi @@ -281,16 +274,12 @@ then fi fi - # - # Start the datamanager (and do not abort boot if it fails) - # + # waypoint storage if dataman start then fi - # - # Start the Commander (needs to be this early for in-air-restarts) - # + # Needs to be this early for in-air-restarts commander start # @@ -424,9 +413,6 @@ then fi fi - # - # MAVLink - # if [ $MAVLINK_FLAGS == default ] then # Normal mode, use baudrate 57600 (default) and data rate 1000 bytes/s @@ -454,10 +440,6 @@ then # Sensors, Logging, GPS # sh /etc/init.d/rc.sensors - - # - # Start logging in all modes, including HIL - # sh /etc/init.d/rc.logging if [ $GPS == yes ] diff --git a/Tools/px_generate_xml.sh b/Tools/px_generate_xml.sh index 65f0c95da..65f0c95da 100644..100755 --- a/Tools/px_generate_xml.sh +++ b/Tools/px_generate_xml.sh diff --git a/Tools/px_update_wiki.sh b/Tools/px_update_wiki.sh index d66bb9e10..d66bb9e10 100644..100755 --- a/Tools/px_update_wiki.sh +++ b/Tools/px_update_wiki.sh diff --git a/Tools/px_uploader.py b/Tools/px_uploader.py index b46db00b5..3a4540ac0 100755 --- a/Tools/px_uploader.py +++ b/Tools/px_uploader.py @@ -178,9 +178,9 @@ class uploader(object): MAVLINK_REBOOT_ID1 = bytearray(b'\xfe\x21\x72\xff\x00\x4c\x00\x00\x80\x3f\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\xf6\x00\x01\x00\x00\x48\xf0') MAVLINK_REBOOT_ID0 = bytearray(b'\xfe\x21\x45\xff\x00\x4c\x00\x00\x80\x3f\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\xf6\x00\x00\x00\x00\xd7\xac') - def __init__(self, portname, baudrate, interCharTimeout=0.001, timeout=0.5): + def __init__(self, portname, baudrate): # open the port, keep the default timeout short so we can poll quickly - self.port = serial.Serial(portname, baudrate) + self.port = serial.Serial(portname, baudrate, timeout=0.5) self.otp = b'' self.sn = b'' @@ -195,7 +195,7 @@ class uploader(object): def __recv(self, count=1): c = self.port.read(count) if len(c) < 1: - raise RuntimeError("timeout waiting for data (%u bytes)", count) + raise RuntimeError("timeout waiting for data (%u bytes)" % count) # print("recv " + binascii.hexlify(c)) return c @@ -458,7 +458,8 @@ if os.path.exists("/usr/sbin/ModemManager"): # Load the firmware file fw = firmware(args.firmware) -print("Loaded firmware for %x,%x, waiting for the bootloader..." % (fw.property('board_id'), fw.property('board_revision'))) +print("Loaded firmware for %x,%x, size: %d bytes, waiting for the bootloader..." % (fw.property('board_id'), fw.property('board_revision'), fw.property('image_size'))) +print("If the board does not respond within 1-2 seconds, unplug and re-plug the USB connector.") # Spin waiting for a device to show up while True: @@ -508,9 +509,12 @@ while True: except Exception: # most probably a timeout talking to the port, no bootloader, try to reboot the board print("attempting reboot on %s..." % port) + print("if the board does not respond, unplug and re-plug the USB connector.") up.send_reboot() # wait for the reboot, without we might run into Serial I/O Error 5 time.sleep(0.5) + # always close the port + up.close() continue try: diff --git a/Tools/sdlog2/sdlog2_dump.py b/Tools/sdlog2/sdlog2_dump.py index ca2efb021..8b0ccb2d7 100644..100755 --- a/Tools/sdlog2/sdlog2_dump.py +++ b/Tools/sdlog2/sdlog2_dump.py @@ -154,8 +154,8 @@ class SDLog2Parser: first_data_msg = False self.__parseMsg(msg_descr) bytes_read += self.__ptr - if not self.__debug_out and self.__time_msg != None and self.__csv_updated: - self.__printCSVRow() + if not self.__debug_out and self.__time_msg != None and self.__csv_updated: + self.__printCSVRow() f.close() def __bytesLeft(self): diff --git a/Tools/upload.sh b/Tools/upload.sh new file mode 100755 index 000000000..c0dd65eba --- /dev/null +++ b/Tools/upload.sh @@ -0,0 +1,28 @@ +#!/bin/bash + +EXEDIR=`pwd` +BASEDIR=$(dirname $0) + +SYSTYPE=`uname -s` + +# +# Serial port defaults. +# +# XXX The uploader should be smarter than this. +# +if [ $SYSTYPE = "Darwin" ]; +then +SERIAL_PORTS="/dev/tty.usbmodemPX*,/dev/tty.usbmodem*" +fi + +if [ $SYSTYPE = "Linux" ]; +then +SERIAL_PORTS="/dev/serial/by-id/usb-3D_Robotics*" +fi + +if [ $SYSTYPE = "" ]; +then +SERIAL_PORTS="COM32,COM31,COM30,COM29,COM28,COM27,COM26,COM25,COM24,COM23,COM22,COM21,COM20,COM19,COM18,COM17,COM16,COM15,COM14,COM13,COM12,COM11,COM10,COM9,COM8,COM7,COM6,COM5,COM4,COM3,COM2,COM1,COM0" +fi + +python $BASEDIR/px_uploader.py --port $SERIAL_PORTS $1
\ No newline at end of file diff --git a/Tools/usb_serialload.py b/Tools/usb_serialload.py new file mode 100644 index 000000000..5c864532f --- /dev/null +++ b/Tools/usb_serialload.py @@ -0,0 +1,55 @@ +import serial, time + + +port = serial.Serial('/dev/ttyACM0', baudrate=57600, timeout=2) + +data = '01234567890123456789012345678901234567890123456789' +#data = 'hellohello' +outLine = 'echo %s\n' % data + +port.write('\n\n\n') +port.write('free\n') +line = port.readline(80) +while line != '': + print(line) + line = port.readline(80) + + +i = 0 +bytesOut = 0 +bytesIn = 0 + +startTime = time.time() +lastPrint = startTime +while True: + bytesOut += port.write(outLine) + line = port.readline(80) + bytesIn += len(line) + # check command line echo + if (data not in line): + print('command error %d: %s' % (i,line)) + #break + # read echo output + line = port.readline(80) + if (data not in line): + print('echo output error %d: %s' % (i,line)) + #break + bytesIn += len(line) + #print('%d: %s' % (i,line)) + #print('%d: bytesOut: %d, bytesIn: %d' % (i, bytesOut, bytesIn)) + + elapsedT = time.time() - lastPrint + if (time.time() - lastPrint >= 5): + outRate = bytesOut / elapsedT + inRate = bytesIn / elapsedT + usbRate = (bytesOut + bytesIn) / elapsedT + lastPrint = time.time() + print('elapsed time: %f' % (time.time() - startTime)) + print('data rates (bytes/sec): out: %f, in: %f, total: %f' % (outRate, inRate, usbRate)) + + bytesOut = 0 + bytesIn = 0 + + i += 1 + #if (i > 2): break + diff --git a/makefiles/config_px4fmu-v2_default.mk b/makefiles/config_px4fmu-v2_default.mk index d17dff5bb..3c65b19e0 100644 --- a/makefiles/config_px4fmu-v2_default.mk +++ b/makefiles/config_px4fmu-v2_default.mk @@ -40,14 +40,8 @@ MODULES += drivers/meas_airspeed MODULES += drivers/frsky_telemetry MODULES += modules/sensors MODULES += drivers/mkblctrl -MODULES += drivers/pca8574 MODULES += drivers/px4flow - -# Needs to be burned to the ground and re-written; for now, -# just don't build it. -#MODULES += drivers/mkblctrl - # # System commands # @@ -61,7 +55,6 @@ MODULES += systemcmds/pwm MODULES += systemcmds/esc_calib MODULES += systemcmds/reboot MODULES += systemcmds/top -MODULES += systemcmds/tests MODULES += systemcmds/config MODULES += systemcmds/nshterm MODULES += systemcmds/mtd @@ -81,10 +74,8 @@ MODULES += modules/uavcan # Estimation modules (EKF/ SO3 / other filters) # MODULES += modules/attitude_estimator_ekf -MODULES += modules/attitude_estimator_so3 MODULES += modules/ekf_att_pos_estimator MODULES += modules/position_estimator_inav -MODULES += examples/flow_position_estimator # # Vehicle Control @@ -101,12 +92,6 @@ MODULES += modules/mc_pos_control MODULES += modules/sdlog2 # -# Unit tests -# -#MODULES += modules/unit_test -#MODULES += modules/commander/commander_tests - -# # Library modules # MODULES += modules/systemlib @@ -139,7 +124,7 @@ MODULES += modules/bottle_drop #MODULES += examples/math_demo # Tutorial code from # https://pixhawk.ethz.ch/px4/dev/hello_sky -MODULES += examples/px4_simple_app +#MODULES += examples/px4_simple_app # Tutorial code from # https://pixhawk.ethz.ch/px4/dev/daemon diff --git a/makefiles/config_px4fmu-v2_test.mk b/makefiles/config_px4fmu-v2_test.mk index 2f4d9d6a4..6f54b960c 100644 --- a/makefiles/config_px4fmu-v2_test.mk +++ b/makefiles/config_px4fmu-v2_test.mk @@ -50,6 +50,13 @@ MODULES += lib/mathlib/math/filter MODULES += lib/conversion # +# Modules to test-build, but not useful for test environment +# +MODULES += modules/attitude_estimator_so3 +MODULES += drivers/pca8574 +MODULES += examples/flow_position_estimator + +# # Libraries # LIBRARIES += lib/mathlib/CMSIS diff --git a/makefiles/toolchain_gnu-arm-eabi.mk b/makefiles/toolchain_gnu-arm-eabi.mk index 71c7fb49f..84e5cd08a 100644 --- a/makefiles/toolchain_gnu-arm-eabi.mk +++ b/makefiles/toolchain_gnu-arm-eabi.mk @@ -50,11 +50,11 @@ OBJDUMP = $(CROSSDEV)objdump # Check if the right version of the toolchain is available # -CROSSDEV_VER_SUPPORTED = 4.7 +CROSSDEV_VER_SUPPORTED = 4.7.4 4.7.5 4.7.6 4.8.4 CROSSDEV_VER_FOUND = $(shell $(CC) -dumpversion) -ifeq (,$(findstring $(CROSSDEV_VER_SUPPORTED),$(CROSSDEV_VER_FOUND))) -$(error Unsupported version of $(CC), found: $(CROSSDEV_VER_FOUND) instead of $(CROSSDEV_VER_SUPPORTED).x) +ifeq (,$(findstring $(CROSSDEV_VER_FOUND), $(CROSSDEV_VER_SUPPORTED))) +$(error Unsupported version of $(CC), found: $(CROSSDEV_VER_FOUND) instead of one in: $(CROSSDEV_VER_SUPPORTED)) endif diff --git a/mavlink/include/mavlink/v1.0 b/mavlink/include/mavlink/v1.0 -Subproject 8587a007cf89cb13f146ac46be94b61276343ce +Subproject ad5e5a645dec152419264ad32221f7c113ea5c3 diff --git a/nuttx-configs/px4fmu-v1/nsh/Make.defs b/nuttx-configs/px4fmu-v1/nsh/Make.defs index 7b2ea703a..e7318e519 100644 --- a/nuttx-configs/px4fmu-v1/nsh/Make.defs +++ b/nuttx-configs/px4fmu-v1/nsh/Make.defs @@ -53,7 +53,7 @@ NM = $(CROSSDEV)nm OBJCOPY = $(CROSSDEV)objcopy OBJDUMP = $(CROSSDEV)objdump -MAXOPTIMIZATION = -O3 +MAXOPTIMIZATION = -Os ARCHCPUFLAGS = -mcpu=cortex-m4 \ -mthumb \ -march=armv7e-m \ diff --git a/nuttx-configs/px4fmu-v2/nsh/Make.defs b/nuttx-configs/px4fmu-v2/nsh/Make.defs index e70320aaa..f3ce53b4a 100644 --- a/nuttx-configs/px4fmu-v2/nsh/Make.defs +++ b/nuttx-configs/px4fmu-v2/nsh/Make.defs @@ -53,7 +53,7 @@ NM = $(CROSSDEV)nm OBJCOPY = $(CROSSDEV)objcopy OBJDUMP = $(CROSSDEV)objdump -MAXOPTIMIZATION = -O3 +MAXOPTIMIZATION = -Os ARCHCPUFLAGS = -mcpu=cortex-m4 \ -mthumb \ -march=armv7e-m \ diff --git a/nuttx-configs/px4fmu-v2/scripts/ld.script b/nuttx-configs/px4fmu-v2/scripts/ld.script index 1be39fb87..bec896d1c 100644 --- a/nuttx-configs/px4fmu-v2/scripts/ld.script +++ b/nuttx-configs/px4fmu-v2/scripts/ld.script @@ -50,7 +50,8 @@ MEMORY { - flash (rx) : ORIGIN = 0x08004000, LENGTH = 2032K + /* disabled due to silicon errata flash (rx) : ORIGIN = 0x08004000, LENGTH = 2032K */ + flash (rx) : ORIGIN = 0x08004000, LENGTH = 1008K sram (rwx) : ORIGIN = 0x20000000, LENGTH = 192K ccsram (rwx) : ORIGIN = 0x10000000, LENGTH = 64K } diff --git a/nuttx-configs/px4io-v1/nsh/Make.defs b/nuttx-configs/px4io-v1/nsh/Make.defs index 712631f47..7a0792ff6 100644 --- a/nuttx-configs/px4io-v1/nsh/Make.defs +++ b/nuttx-configs/px4io-v1/nsh/Make.defs @@ -53,7 +53,7 @@ NM = $(CROSSDEV)nm OBJCOPY = $(CROSSDEV)objcopy OBJDUMP = $(CROSSDEV)objdump -MAXOPTIMIZATION = -O3 +MAXOPTIMIZATION = -Os ARCHCPUFLAGS = -mcpu=cortex-m3 \ -mthumb \ -march=armv7-m diff --git a/nuttx-configs/px4io-v2/nsh/Make.defs b/nuttx-configs/px4io-v2/nsh/Make.defs index cd2d8eba3..1717464d2 100644 --- a/nuttx-configs/px4io-v2/nsh/Make.defs +++ b/nuttx-configs/px4io-v2/nsh/Make.defs @@ -53,15 +53,11 @@ NM = $(CROSSDEV)nm OBJCOPY = $(CROSSDEV)objcopy OBJDUMP = $(CROSSDEV)objdump -MAXOPTIMIZATION = -O3 +MAXOPTIMIZATION = -Os ARCHCPUFLAGS = -mcpu=cortex-m3 \ -mthumb \ -march=armv7-m -# enable precise stack overflow tracking -#INSTRUMENTATIONDEFINES = -finstrument-functions \ -# -ffixed-r10 - # use our linker script LDSCRIPT = ld.script diff --git a/src/drivers/airspeed/airspeed.cpp b/src/drivers/airspeed/airspeed.cpp index 293690d27..3a1e1b7b5 100644 --- a/src/drivers/airspeed/airspeed.cpp +++ b/src/drivers/airspeed/airspeed.cpp @@ -147,7 +147,7 @@ Airspeed::init() _airspeed_pub = orb_advertise(ORB_ID(differential_pressure), &arp); if (_airspeed_pub < 0) - warnx("failed to create airspeed sensor object. uORB started?"); + warnx("uORB started?"); } ret = OK; diff --git a/src/drivers/ardrone_interface/ardrone_interface.c b/src/drivers/ardrone_interface/ardrone_interface.c index e5bb772b3..9d2c1441d 100644 --- a/src/drivers/ardrone_interface/ardrone_interface.c +++ b/src/drivers/ardrone_interface/ardrone_interface.c @@ -89,8 +89,8 @@ static void usage(const char *reason) { if (reason) - fprintf(stderr, "%s\n", reason); - fprintf(stderr, "usage: ardrone_interface {start|stop|status} [-d <UART>]\n\n"); + warnx("%s\n", reason); + warnx("usage: {start|stop|status} [-d <UART>]\n\n"); exit(1); } @@ -110,7 +110,7 @@ int ardrone_interface_main(int argc, char *argv[]) if (!strcmp(argv[1], "start")) { if (thread_running) { - printf("ardrone_interface already running\n"); + warnx("already running\n"); /* this is not an error */ exit(0); } @@ -132,9 +132,9 @@ int ardrone_interface_main(int argc, char *argv[]) if (!strcmp(argv[1], "status")) { if (thread_running) { - printf("\tardrone_interface is running\n"); + warnx("running"); } else { - printf("\tardrone_interface not started\n"); + warnx("not started"); } exit(0); } @@ -158,7 +158,7 @@ static int ardrone_open_uart(char *uart_name, struct termios *uart_config_origin /* Back up the original uart configuration to restore it after exit */ if ((termios_state = tcgetattr(uart, uart_config_original)) < 0) { - fprintf(stderr, "[ardrone_interface] ERROR getting baudrate / termios config for %s: %d\n", uart_name, termios_state); + warnx("ERR: TCGETATTR %s: %d", uart_name, termios_state); close(uart); return -1; } @@ -171,14 +171,14 @@ static int ardrone_open_uart(char *uart_name, struct termios *uart_config_origin /* Set baud rate */ if (cfsetispeed(&uart_config, speed) < 0 || cfsetospeed(&uart_config, speed) < 0) { - fprintf(stderr, "[ardrone_interface] ERROR setting baudrate / termios config for %s: %d (cfsetispeed, cfsetospeed)\n", uart_name, termios_state); + warnx("ERR: cfsetispeed %s: %d", uart_name, termios_state); close(uart); return -1; } if ((termios_state = tcsetattr(uart, TCSANOW, &uart_config)) < 0) { - fprintf(stderr, "[ardrone_interface] ERROR setting baudrate / termios config for %s (tcsetattr)\n", uart_name); + warnx("ERR: tcsetattr: %s", uart_name); close(uart); return -1; } @@ -192,9 +192,6 @@ int ardrone_interface_thread_main(int argc, char *argv[]) char *device = "/dev/ttyS1"; - /* welcome user */ - printf("[ardrone_interface] Control started, taking over motors\n"); - /* File descriptors */ int gpios; @@ -237,7 +234,7 @@ int ardrone_interface_thread_main(int argc, char *argv[]) struct termios uart_config_original; if (motor_test_mode) { - printf("[ardrone_interface] Motor test mode enabled, setting 10 %% thrust.\n"); + warnx("setting 10 %% thrust.\n"); } /* Led animation */ @@ -255,9 +252,6 @@ int ardrone_interface_thread_main(int argc, char *argv[]) int actuator_controls_sub = orb_subscribe(ORB_ID_VEHICLE_ATTITUDE_CONTROLS); int armed_sub = orb_subscribe(ORB_ID(actuator_armed)); - printf("[ardrone_interface] Motors initialized - ready.\n"); - fflush(stdout); - /* enable UART, writes potentially an empty buffer, but multiplexing is disabled */ ardrone_write = ardrone_open_uart(device, &uart_config_original); @@ -265,7 +259,7 @@ int ardrone_interface_thread_main(int argc, char *argv[]) gpios = ar_multiplexing_init(); if (ardrone_write < 0) { - fprintf(stderr, "[ardrone_interface] Failed opening AR.Drone UART, exiting.\n"); + warnx("No UART, exiting."); thread_running = false; exit(ERROR); } @@ -273,7 +267,7 @@ int ardrone_interface_thread_main(int argc, char *argv[]) /* initialize motors */ if (OK != ar_init_motors(ardrone_write, gpios)) { close(ardrone_write); - fprintf(stderr, "[ardrone_interface] Failed initializing AR.Drone motors, exiting.\n"); + warnx("motor init fail"); thread_running = false; exit(ERROR); } @@ -294,7 +288,7 @@ int ardrone_interface_thread_main(int argc, char *argv[]) gpios = ar_multiplexing_init(); if (ardrone_write < 0) { - fprintf(stderr, "[ardrone_interface] Failed opening AR.Drone UART, exiting.\n"); + warnx("write fail"); thread_running = false; exit(ERROR); } @@ -302,7 +296,7 @@ int ardrone_interface_thread_main(int argc, char *argv[]) /* initialize motors */ if (OK != ar_init_motors(ardrone_write, gpios)) { close(ardrone_write); - fprintf(stderr, "[ardrone_interface] Failed initializing AR.Drone motors, exiting.\n"); + warnx("motor init fail"); thread_running = false; exit(ERROR); } @@ -378,11 +372,9 @@ int ardrone_interface_thread_main(int argc, char *argv[]) int termios_state; if ((termios_state = tcsetattr(ardrone_write, TCSANOW, &uart_config_original)) < 0) { - fprintf(stderr, "[ardrone_interface] ERROR setting baudrate / termios config for (tcsetattr)\n"); + warnx("ERR: tcsetattr"); } - printf("[ardrone_interface] Restored original UART config, exiting..\n"); - /* close uarts */ close(ardrone_write); ar_multiplexing_deinit(gpios); diff --git a/src/drivers/ardrone_interface/ardrone_motor_control.c b/src/drivers/ardrone_interface/ardrone_motor_control.c index fc017dd58..4fa24275f 100644 --- a/src/drivers/ardrone_interface/ardrone_motor_control.c +++ b/src/drivers/ardrone_interface/ardrone_motor_control.c @@ -301,7 +301,7 @@ int ar_init_motors(int ardrone_uart, int gpios) ardrone_write_motor_commands(ardrone_uart, 0, 0, 0, 0); if (errcounter != 0) { - fprintf(stderr, "[ardrone_interface] init sequence incomplete, failed %d times", -errcounter); + warnx("Failed %d times", -errcounter); fflush(stdout); } return errcounter; diff --git a/src/drivers/boards/aerocore/module.mk b/src/drivers/boards/aerocore/module.mk index b53fe0a29..0a2d91009 100644 --- a/src/drivers/boards/aerocore/module.mk +++ b/src/drivers/boards/aerocore/module.mk @@ -6,3 +6,5 @@ SRCS = aerocore_init.c \ aerocore_pwm_servo.c \ aerocore_spi.c \ aerocore_led.c + +MAXOPTIMIZATION = -Os diff --git a/src/drivers/boards/px4fmu-v1/module.mk b/src/drivers/boards/px4fmu-v1/module.mk index 66b776917..5e1a27d5a 100644 --- a/src/drivers/boards/px4fmu-v1/module.mk +++ b/src/drivers/boards/px4fmu-v1/module.mk @@ -8,3 +8,5 @@ SRCS = px4fmu_can.c \ px4fmu_spi.c \ px4fmu_usb.c \ px4fmu_led.c + +MAXOPTIMIZATION = -Os diff --git a/src/drivers/boards/px4fmu-v2/module.mk b/src/drivers/boards/px4fmu-v2/module.mk index 99d37eeca..103232b0c 100644 --- a/src/drivers/boards/px4fmu-v2/module.mk +++ b/src/drivers/boards/px4fmu-v2/module.mk @@ -8,3 +8,5 @@ SRCS = px4fmu_can.c \ px4fmu_spi.c \ px4fmu_usb.c \ px4fmu2_led.c + +MAXOPTIMIZATION = -Os diff --git a/src/drivers/boards/px4io-v1/module.mk b/src/drivers/boards/px4io-v1/module.mk index 2601a1c15..a7a14dd07 100644 --- a/src/drivers/boards/px4io-v1/module.mk +++ b/src/drivers/boards/px4io-v1/module.mk @@ -4,3 +4,5 @@ SRCS = px4io_init.c \ px4io_pwm_servo.c + +MAXOPTIMIZATION = -Os diff --git a/src/drivers/boards/px4io-v2/board_config.h b/src/drivers/boards/px4io-v2/board_config.h index ef9bb5cad..10a93be0b 100644 --- a/src/drivers/boards/px4io-v2/board_config.h +++ b/src/drivers/boards/px4io-v2/board_config.h @@ -77,6 +77,7 @@ #define GPIO_LED1 (GPIO_OUTPUT|GPIO_CNF_OUTOD|GPIO_MODE_50MHz|GPIO_OUTPUT_SET|GPIO_PORTB|GPIO_PIN14) #define GPIO_LED2 (GPIO_OUTPUT|GPIO_CNF_OUTOD|GPIO_MODE_50MHz|GPIO_OUTPUT_SET|GPIO_PORTB|GPIO_PIN15) #define GPIO_LED3 (GPIO_OUTPUT|GPIO_CNF_OUTOD|GPIO_MODE_50MHz|GPIO_OUTPUT_SET|GPIO_PORTB|GPIO_PIN13) +#define GPIO_LED4 (GPIO_OUTPUT|GPIO_CNF_OUTOD|GPIO_MODE_50MHz|GPIO_OUTPUT_SET|GPIO_PORTA|GPIO_PIN11) /* Safety switch button *******************************************************/ diff --git a/src/drivers/boards/px4io-v2/module.mk b/src/drivers/boards/px4io-v2/module.mk index 85f94e8be..3f0e9a0b3 100644 --- a/src/drivers/boards/px4io-v2/module.mk +++ b/src/drivers/boards/px4io-v2/module.mk @@ -4,3 +4,5 @@ SRCS = px4iov2_init.c \ px4iov2_pwm_servo.c + +MAXOPTIMIZATION = -Os diff --git a/src/drivers/boards/px4io-v2/px4iov2_init.c b/src/drivers/boards/px4io-v2/px4iov2_init.c index 9f8c0eeb2..5c3343ccc 100644 --- a/src/drivers/boards/px4io-v2/px4iov2_init.c +++ b/src/drivers/boards/px4io-v2/px4iov2_init.c @@ -108,6 +108,7 @@ __EXPORT void stm32_boardinitialize(void) stm32_configgpio(GPIO_LED1); stm32_configgpio(GPIO_LED2); stm32_configgpio(GPIO_LED3); + stm32_configgpio(GPIO_LED4); stm32_configgpio(GPIO_BTN_SAFETY); diff --git a/src/drivers/device/device.h b/src/drivers/device/device.h index 9d684e394..67aaa0aff 100644 --- a/src/drivers/device/device.h +++ b/src/drivers/device/device.h @@ -130,7 +130,8 @@ public: enum DeviceBusType { DeviceBusType_UNKNOWN = 0, DeviceBusType_I2C = 1, - DeviceBusType_SPI = 2 + DeviceBusType_SPI = 2, + DeviceBusType_UAVCAN = 3, }; /* diff --git a/src/drivers/drv_pwm_output.h b/src/drivers/drv_pwm_output.h index f66ec7c95..b10c3e18a 100644 --- a/src/drivers/drv_pwm_output.h +++ b/src/drivers/drv_pwm_output.h @@ -117,6 +117,23 @@ struct pwm_output_values { unsigned channel_count; }; + +/** + * RC config values for a channel + * + * This allows for PX4IO_PAGE_RC_CONFIG values to be set without a + * param_get() dependency + */ +struct pwm_output_rc_config { + uint8_t channel; + uint16_t rc_min; + uint16_t rc_trim; + uint16_t rc_max; + uint16_t rc_dz; + uint16_t rc_assignment; + bool rc_reverse; +}; + /* * ORB tag for PWM outputs. */ @@ -213,6 +230,21 @@ ORB_DECLARE(output_pwm); /** make failsafe non-recoverable (termination) if it occurs */ #define PWM_SERVO_SET_TERMINATION_FAILSAFE _IOC(_PWM_SERVO_BASE, 25) +/** force safety switch on (to enable use of safety switch) */ +#define PWM_SERVO_SET_FORCE_SAFETY_ON _IOC(_PWM_SERVO_BASE, 26) + +/** set RC config for a channel. This takes a pointer to pwm_output_rc_config */ +#define PWM_SERVO_SET_RC_CONFIG _IOC(_PWM_SERVO_BASE, 27) + +/** set the 'OVERRIDE OK' bit, which allows for RC control on FMU loss */ +#define PWM_SERVO_SET_OVERRIDE_OK _IOC(_PWM_SERVO_BASE, 28) + +/** clear the 'OVERRIDE OK' bit, which allows for RC control on FMU loss */ +#define PWM_SERVO_CLEAR_OVERRIDE_OK _IOC(_PWM_SERVO_BASE, 29) + +/** setup OVERRIDE_IMMEDIATE behaviour on FMU fail */ +#define PWM_SERVO_SET_OVERRIDE_IMMEDIATE _IOC(_PWM_SERVO_BASE, 30) + /* * * diff --git a/src/drivers/frsky_telemetry/frsky_telemetry.c b/src/drivers/frsky_telemetry/frsky_telemetry.c index 6e0839043..bccdf1190 100644 --- a/src/drivers/frsky_telemetry/frsky_telemetry.c +++ b/src/drivers/frsky_telemetry/frsky_telemetry.c @@ -84,7 +84,7 @@ static int frsky_open_uart(const char *uart_name, struct termios *uart_config_or /* Back up the original UART configuration to restore it after exit */ int termios_state; if ((termios_state = tcgetattr(uart, uart_config_original)) < 0) { - warnx("ERROR get termios config %s: %d\n", uart_name, termios_state); + warnx("ERR: tcgetattr%s: %d\n", uart_name, termios_state); close(uart); return -1; } @@ -100,13 +100,13 @@ static int frsky_open_uart(const char *uart_name, struct termios *uart_config_or static const speed_t speed = B9600; if (cfsetispeed(&uart_config, speed) < 0 || cfsetospeed(&uart_config, speed) < 0) { - warnx("ERROR setting baudrate / termios config for %s: %d (cfsetispeed, cfsetospeed)\n", uart_name, termios_state); + warnx("ERR: %s: %d (cfsetispeed, cfsetospeed)\n", uart_name, termios_state); close(uart); return -1; } if ((termios_state = tcsetattr(uart, TCSANOW, &uart_config)) < 0) { - warnx("ERROR setting baudrate / termios config for %s (tcsetattr)\n", uart_name); + warnx("ERR: %s (tcsetattr)\n", uart_name); close(uart); return -1; } @@ -151,9 +151,6 @@ static int frsky_telemetry_thread_main(int argc, char *argv[]) } } - /* Print welcome text */ - warnx("FrSky telemetry interface starting..."); - /* Open UART */ struct termios uart_config_original; const int uart = frsky_open_uart(device_name, &uart_config_original); diff --git a/src/drivers/hil/hil.cpp b/src/drivers/hil/hil.cpp index f0dc0c651..9b5c8133b 100644 --- a/src/drivers/hil/hil.cpp +++ b/src/drivers/hil/hil.cpp @@ -442,8 +442,6 @@ HIL::task_main() /* make sure servos are off */ // up_pwm_servo_deinit(); - log("stopping"); - /* note - someone else is responsible for restoring the GPIO config */ /* tell the dtor that we are exiting */ diff --git a/src/drivers/hmc5883/hmc5883.cpp b/src/drivers/hmc5883/hmc5883.cpp index e4ecfa6b5..81f767965 100644 --- a/src/drivers/hmc5883/hmc5883.cpp +++ b/src/drivers/hmc5883/hmc5883.cpp @@ -1049,11 +1049,9 @@ int HMC5883::calibrate(struct file *filp, unsigned enable) * LSM/Ga, giving 1.16 and 1.08 */ float expected_cal[3] = { 1.16f, 1.08f, 1.08f }; - warnx("starting mag scale calibration"); - /* start the sensor polling at 50 Hz */ if (OK != ioctl(filp, SENSORIOCSPOLLRATE, 50)) { - warn("failed to set 2Hz poll rate"); + warn("FAILED: SENSORIOCSPOLLRATE 2Hz"); ret = 1; goto out; } @@ -1061,25 +1059,25 @@ int HMC5883::calibrate(struct file *filp, unsigned enable) /* Set to 2.5 Gauss. We ask for 3 to get the right part of * the chained if statement above. */ if (OK != ioctl(filp, MAGIOCSRANGE, 3)) { - warnx("failed to set 2.5 Ga range"); + warnx("FAILED: MAGIOCSRANGE 3.3 Ga"); ret = 1; goto out; } if (OK != ioctl(filp, MAGIOCEXSTRAP, 1)) { - warnx("failed to enable sensor calibration mode"); + warnx("FAILED: MAGIOCEXSTRAP 1"); ret = 1; goto out; } if (OK != ioctl(filp, MAGIOCGSCALE, (long unsigned int)&mscale_previous)) { - warn("WARNING: failed to get scale / offsets for mag"); + warn("FAILED: MAGIOCGSCALE 1"); ret = 1; goto out; } if (OK != ioctl(filp, MAGIOCSSCALE, (long unsigned int)&mscale_null)) { - warn("WARNING: failed to set null scale / offsets for mag"); + warn("FAILED: MAGIOCSSCALE 1"); ret = 1; goto out; } @@ -1094,7 +1092,7 @@ int HMC5883::calibrate(struct file *filp, unsigned enable) ret = ::poll(&fds, 1, 2000); if (ret != 1) { - warn("timed out waiting for sensor data"); + warn("ERROR: TIMEOUT 1"); goto out; } @@ -1102,7 +1100,7 @@ int HMC5883::calibrate(struct file *filp, unsigned enable) sz = ::read(fd, &report, sizeof(report)); if (sz != sizeof(report)) { - warn("periodic read failed"); + warn("ERROR: READ 1"); ret = -EIO; goto out; } @@ -1118,7 +1116,7 @@ int HMC5883::calibrate(struct file *filp, unsigned enable) ret = ::poll(&fds, 1, 2000); if (ret != 1) { - warn("timed out waiting for sensor data"); + warn("ERROR: TIMEOUT 2"); goto out; } @@ -1126,7 +1124,7 @@ int HMC5883::calibrate(struct file *filp, unsigned enable) sz = ::read(fd, &report, sizeof(report)); if (sz != sizeof(report)) { - warn("periodic read failed"); + warn("ERROR: READ 2"); ret = -EIO; goto out; } @@ -1142,33 +1140,19 @@ int HMC5883::calibrate(struct file *filp, unsigned enable) sum_excited[1] += cal[1]; sum_excited[2] += cal[2]; } - - //warnx("periodic read %u", i); - //warnx("measurement: %.6f %.6f %.6f", (double)report.x, (double)report.y, (double)report.z); - //warnx("cal: %.6f %.6f %.6f", (double)cal[0], (double)cal[1], (double)cal[2]); } if (good_count < 5) { - warn("failed calibration"); ret = -EIO; goto out; } -#if 0 - warnx("measurement avg: %.6f %.6f %.6f", - (double)sum_excited[0]/good_count, - (double)sum_excited[1]/good_count, - (double)sum_excited[2]/good_count); -#endif - float scaling[3]; scaling[0] = sum_excited[0] / good_count; scaling[1] = sum_excited[1] / good_count; scaling[2] = sum_excited[2] / good_count; - warnx("axes scaling: %.6f %.6f %.6f", (double)scaling[0], (double)scaling[1], (double)scaling[2]); - /* set scaling in device */ mscale_previous.x_scale = scaling[0]; mscale_previous.y_scale = scaling[1]; @@ -1179,29 +1163,26 @@ int HMC5883::calibrate(struct file *filp, unsigned enable) out: if (OK != ioctl(filp, MAGIOCSSCALE, (long unsigned int)&mscale_previous)) { - warn("failed to set new scale / offsets for mag"); + warn("FAILED: MAGIOCSSCALE 2"); } /* set back to normal mode */ /* Set to 1.1 Gauss */ if (OK != ::ioctl(fd, MAGIOCSRANGE, 1)) { - warnx("failed to set 1.1 Ga range"); + warnx("FAILED: MAGIOCSRANGE 1.1 Ga"); } if (OK != ::ioctl(fd, MAGIOCEXSTRAP, 0)) { - warnx("failed to disable sensor calibration mode"); + warnx("FAILED: MAGIOCEXSTRAP 0"); } if (ret == OK) { - if (!check_scale()) { - warnx("mag scale calibration successfully finished."); - } else { - warnx("mag scale calibration finished with invalid results."); + if (check_scale()) { + /* failed */ + warnx("FAILED: SCALE"); ret = ERROR; } - } else { - warnx("mag scale calibration failed."); } return ret; diff --git a/src/drivers/hmc5883/module.mk b/src/drivers/hmc5883/module.mk index 5daa01dc5..be2ee7276 100644 --- a/src/drivers/hmc5883/module.mk +++ b/src/drivers/hmc5883/module.mk @@ -42,3 +42,5 @@ SRCS = hmc5883.cpp MODULE_STACKSIZE = 1200 EXTRACXXFLAGS = -Weffc++ + +MAXOPTIMIZATION = -Os diff --git a/src/drivers/hott/comms.cpp b/src/drivers/hott/comms.cpp index cb8bbba37..60a49b559 100644 --- a/src/drivers/hott/comms.cpp +++ b/src/drivers/hott/comms.cpp @@ -55,7 +55,7 @@ open_uart(const char *device) const int uart = open(device, O_RDWR | O_NOCTTY); if (uart < 0) { - err(1, "Error opening port: %s", device); + err(1, "ERR: opening %s", device); } /* Back up the original uart configuration to restore it after exit */ @@ -63,7 +63,7 @@ open_uart(const char *device) struct termios uart_config_original; if ((termios_state = tcgetattr(uart, &uart_config_original)) < 0) { close(uart); - err(1, "Error getting baudrate / termios config for %s: %d", device, termios_state); + err(1, "ERR: %s: %d", device, termios_state); } /* Fill the struct for the new configuration */ @@ -76,13 +76,13 @@ open_uart(const char *device) /* Set baud rate */ if (cfsetispeed(&uart_config, speed) < 0 || cfsetospeed(&uart_config, speed) < 0) { close(uart); - err(1, "Error setting baudrate / termios config for %s: %d (cfsetispeed, cfsetospeed)", + err(1, "ERR: %s: %d (cfsetispeed, cfsetospeed)", device, termios_state); } if ((termios_state = tcsetattr(uart, TCSANOW, &uart_config)) < 0) { close(uart); - err(1, "Error setting baudrate / termios config for %s (tcsetattr)", device); + err(1, "ERR: %s (tcsetattr)", device); } /* Activate single wire mode */ diff --git a/src/drivers/hott/hott_sensors/hott_sensors.cpp b/src/drivers/hott/hott_sensors/hott_sensors.cpp index a3d3a3933..8ab9d8d55 100644 --- a/src/drivers/hott/hott_sensors/hott_sensors.cpp +++ b/src/drivers/hott/hott_sensors/hott_sensors.cpp @@ -204,7 +204,7 @@ hott_sensors_main(int argc, char *argv[]) if (!strcmp(argv[1], "start")) { if (thread_running) { - warnx("deamon already running"); + warnx("already running"); exit(0); } @@ -225,10 +225,10 @@ hott_sensors_main(int argc, char *argv[]) if (!strcmp(argv[1], "status")) { if (thread_running) { - warnx("daemon is running"); + warnx("is running"); } else { - warnx("daemon not started"); + warnx("not started"); } exit(0); diff --git a/src/drivers/hott/hott_telemetry/hott_telemetry.cpp b/src/drivers/hott/hott_telemetry/hott_telemetry.cpp index d293f9954..edbb14172 100644 --- a/src/drivers/hott/hott_telemetry/hott_telemetry.cpp +++ b/src/drivers/hott/hott_telemetry/hott_telemetry.cpp @@ -230,7 +230,7 @@ hott_telemetry_main(int argc, char *argv[]) if (!strcmp(argv[1], "start")) { if (thread_running) { - warnx("deamon already running"); + warnx("already running"); exit(0); } @@ -251,10 +251,10 @@ hott_telemetry_main(int argc, char *argv[]) if (!strcmp(argv[1], "status")) { if (thread_running) { - warnx("daemon is running"); + warnx("is running"); } else { - warnx("daemon not started"); + warnx("not started"); } exit(0); diff --git a/src/drivers/l3gd20/l3gd20.cpp b/src/drivers/l3gd20/l3gd20.cpp index cfae8761c..82fa5cc6e 100644 --- a/src/drivers/l3gd20/l3gd20.cpp +++ b/src/drivers/l3gd20/l3gd20.cpp @@ -176,6 +176,7 @@ static const int ERROR = -1; #define L3G4200D_DEFAULT_RATE 800 #define L3GD20_DEFAULT_RANGE_DPS 2000 #define L3GD20_DEFAULT_FILTER_FREQ 30 +#define L3GD20_TEMP_OFFSET_CELSIUS 40 #ifndef SENSOR_BOARD_ROTATION_DEFAULT #define SENSOR_BOARD_ROTATION_DEFAULT SENSOR_BOARD_ROTATION_270_DEG @@ -856,7 +857,7 @@ L3GD20::measure() #pragma pack(push, 1) struct { uint8_t cmd; - uint8_t temp; + int8_t temp; uint8_t status; int16_t x; int16_t y; @@ -930,6 +931,8 @@ L3GD20::measure() report.z_raw = raw_report.z; + report.temperature_raw = raw_report.temp; + report.x = ((report.x_raw * _gyro_range_scale) - _gyro_scale.x_offset) * _gyro_scale.x_scale; report.y = ((report.y_raw * _gyro_range_scale) - _gyro_scale.y_offset) * _gyro_scale.y_scale; report.z = ((report.z_raw * _gyro_range_scale) - _gyro_scale.z_offset) * _gyro_scale.z_scale; @@ -938,6 +941,8 @@ L3GD20::measure() report.y = _gyro_filter_y.apply(report.y); report.z = _gyro_filter_z.apply(report.z); + report.temperature = L3GD20_TEMP_OFFSET_CELSIUS - raw_report.temp; + // apply user specified rotation rotate_3f(_rotation, report.x, report.y, report.z); @@ -1091,9 +1096,11 @@ test() warnx("gyro x: \t% 9.5f\trad/s", (double)g_report.x); warnx("gyro y: \t% 9.5f\trad/s", (double)g_report.y); warnx("gyro z: \t% 9.5f\trad/s", (double)g_report.z); + warnx("temp: \t%d\tC", (int)g_report.temperature); warnx("gyro x: \t%d\traw", (int)g_report.x_raw); warnx("gyro y: \t%d\traw", (int)g_report.y_raw); warnx("gyro z: \t%d\traw", (int)g_report.z_raw); + warnx("temp: \t%d\traw", (int)g_report.temperature_raw); warnx("gyro range: %8.4f rad/s (%d deg/s)", (double)g_report.range_rad_s, (int)((g_report.range_rad_s / M_PI_F) * 180.0f + 0.5f)); diff --git a/src/drivers/l3gd20/module.mk b/src/drivers/l3gd20/module.mk index 5630e7aec..3d64d62be 100644 --- a/src/drivers/l3gd20/module.mk +++ b/src/drivers/l3gd20/module.mk @@ -8,3 +8,5 @@ SRCS = l3gd20.cpp MODULE_STACKSIZE = 1200 EXTRACXXFLAGS = -Weffc++ + +MAXOPTIMIZATION = -Os diff --git a/src/drivers/ll40ls/ll40ls.cpp b/src/drivers/ll40ls/ll40ls.cpp index 8b156f7ba..6793acd81 100644 --- a/src/drivers/ll40ls/ll40ls.cpp +++ b/src/drivers/ll40ls/ll40ls.cpp @@ -73,15 +73,19 @@ /* Configuration Constants */ #define LL40LS_BUS PX4_I2C_BUS_EXPANSION -#define LL40LS_BASEADDR 0x42 /* 7-bit address */ +#define LL40LS_BASEADDR 0x62 /* 7-bit address */ +#define LL40LS_BASEADDR_OLD 0x42 /* previous 7-bit address */ #define LL40LS_DEVICE_PATH_INT "/dev/ll40ls_int" #define LL40LS_DEVICE_PATH_EXT "/dev/ll40ls_ext" /* LL40LS Registers addresses */ #define LL40LS_MEASURE_REG 0x00 /* Measure range register */ -#define LL40LS_MSRREG_ACQUIRE 0x04 /* Value to initiate a measurement, varies based on sensor revision */ +#define LL40LS_MSRREG_ACQUIRE 0x04 /* Value to initiate a measurement, varies based on sensor revision */ #define LL40LS_DISTHIGH_REG 0x8F /* High byte of distance register, auto increment */ +#define LL40LS_WHO_AM_I_REG 0x11 +#define LL40LS_WHO_AM_I_REG_VAL 0xCA +#define LL40LS_SIGNAL_STRENGTH_REG 0x5b /* Device limits */ #define LL40LS_MIN_DISTANCE (0.00f) @@ -117,6 +121,7 @@ public: protected: virtual int probe(); + virtual int read_reg(uint8_t reg, uint8_t &val); private: float _min_distance; @@ -210,7 +215,7 @@ LL40LS::LL40LS(int bus, const char *path, int address) : _bus(bus) { // up the retries since the device misses the first measure attempts - I2C::_retries = 3; + _retries = 3; // enable debug() calls _debug_enabled = false; @@ -278,8 +283,50 @@ out: } int +LL40LS::read_reg(uint8_t reg, uint8_t &val) +{ + return transfer(®, 1, &val, 1); +} + +int LL40LS::probe() { + // cope with both old and new I2C bus address + const uint8_t addresses[2] = {LL40LS_BASEADDR, LL40LS_BASEADDR_OLD}; + + // more retries for detection + _retries = 10; + + for (uint8_t i=0; i<sizeof(addresses); i++) { + uint8_t val=0, who_am_i=0; + + // set the I2C bus address + set_address(addresses[i]); + + if (read_reg(LL40LS_WHO_AM_I_REG, who_am_i) == OK && who_am_i == LL40LS_WHO_AM_I_REG_VAL) { + // it is responding correctly to a WHO_AM_I + goto ok; + } + + if (read_reg(LL40LS_SIGNAL_STRENGTH_REG, val) == OK && val != 0) { + // very likely to be a ll40ls. px4flow does not + // respond to this + goto ok; + } + + debug("WHO_AM_I byte mismatch 0x%02x should be 0x%02x val=0x%02x\n", + (unsigned)who_am_i, + LL40LS_WHO_AM_I_REG_VAL, + (unsigned)val); + } + + // not found on any address + return -EIO; + +ok: + _retries = 3; + + // start a measurement return measure(); } diff --git a/src/drivers/lsm303d/module.mk b/src/drivers/lsm303d/module.mk index b4f3974f4..0421eb113 100644 --- a/src/drivers/lsm303d/module.mk +++ b/src/drivers/lsm303d/module.mk @@ -8,3 +8,5 @@ SRCS = lsm303d.cpp MODULE_STACKSIZE = 1200 EXTRACXXFLAGS = -Weffc++ + +MAXOPTIMIZATION = -Os diff --git a/src/drivers/meas_airspeed/meas_airspeed.cpp b/src/drivers/meas_airspeed/meas_airspeed.cpp index 1d9a463ad..ba46de379 100644 --- a/src/drivers/meas_airspeed/meas_airspeed.cpp +++ b/src/drivers/meas_airspeed/meas_airspeed.cpp @@ -519,7 +519,7 @@ test() ret = poll(&fds, 1, 2000); if (ret != 1) { - errx(1, "timed out waiting for sensor data"); + errx(1, "timed out"); } /* now go get it */ diff --git a/src/drivers/mpu6000/module.mk b/src/drivers/mpu6000/module.mk index 5b4893b12..da9fcc0fc 100644 --- a/src/drivers/mpu6000/module.mk +++ b/src/drivers/mpu6000/module.mk @@ -42,3 +42,5 @@ SRCS = mpu6000.cpp MODULE_STACKSIZE = 1200 EXTRACXXFLAGS = -Weffc++ + +MAXOPTIMIZATION = -Os diff --git a/src/drivers/mpu6000/mpu6000.cpp b/src/drivers/mpu6000/mpu6000.cpp index b22bb2e07..a95e041a1 100644 --- a/src/drivers/mpu6000/mpu6000.cpp +++ b/src/drivers/mpu6000/mpu6000.cpp @@ -229,6 +229,7 @@ private: perf_counter_t _gyro_reads; perf_counter_t _sample_perf; perf_counter_t _bad_transfers; + perf_counter_t _good_transfers; math::LowPassFilter2p _accel_filter_x; math::LowPassFilter2p _accel_filter_y; @@ -404,6 +405,7 @@ MPU6000::MPU6000(int bus, const char *path_accel, const char *path_gyro, spi_dev _gyro_reads(perf_alloc(PC_COUNT, "mpu6000_gyro_read")), _sample_perf(perf_alloc(PC_ELAPSED, "mpu6000_read")), _bad_transfers(perf_alloc(PC_COUNT, "mpu6000_bad_transfers")), + _good_transfers(perf_alloc(PC_COUNT, "mpu6000_good_transfers")), _accel_filter_x(MPU6000_ACCEL_DEFAULT_RATE, MPU6000_ACCEL_DEFAULT_DRIVER_FILTER_FREQ), _accel_filter_y(MPU6000_ACCEL_DEFAULT_RATE, MPU6000_ACCEL_DEFAULT_DRIVER_FILTER_FREQ), _accel_filter_z(MPU6000_ACCEL_DEFAULT_RATE, MPU6000_ACCEL_DEFAULT_DRIVER_FILTER_FREQ), @@ -456,6 +458,7 @@ MPU6000::~MPU6000() perf_free(_accel_reads); perf_free(_gyro_reads); perf_free(_bad_transfers); + perf_free(_good_transfers); } int @@ -1279,8 +1282,14 @@ MPU6000::measure() // all zero data - probably a SPI bus error perf_count(_bad_transfers); perf_end(_sample_perf); + // note that we don't call reset() here as a reset() + // costs 20ms with interrupts disabled. That means if + // the mpu6k does go bad it would cause a FMU failure, + // regardless of whether another sensor is available, return; } + + perf_count(_good_transfers); /* @@ -1399,6 +1408,8 @@ MPU6000::print_info() perf_print_counter(_sample_perf); perf_print_counter(_accel_reads); perf_print_counter(_gyro_reads); + perf_print_counter(_bad_transfers); + perf_print_counter(_good_transfers); _accel_reports->print_info("accel queue"); _gyro_reports->print_info("gyro queue"); } diff --git a/src/drivers/px4flow/px4flow.cpp b/src/drivers/px4flow/px4flow.cpp index 60ad3c1af..804027b05 100644 --- a/src/drivers/px4flow/px4flow.cpp +++ b/src/drivers/px4flow/px4flow.cpp @@ -200,7 +200,7 @@ PX4FLOW::PX4FLOW(int bus, int address) : _buffer_overflows(perf_alloc(PC_COUNT, "px4flow_buffer_overflows")) { // enable debug() calls - _debug_enabled = true; + _debug_enabled = false; // work_cancel in the dtor will explode if we don't do this... memset(&_work, 0, sizeof(_work)); @@ -212,8 +212,9 @@ PX4FLOW::~PX4FLOW() stop(); /* free any existing reports */ - if (_reports != nullptr) + if (_reports != nullptr) { delete _reports; + } } int @@ -222,22 +223,25 @@ PX4FLOW::init() int ret = ERROR; /* do I2C init (and probe) first */ - if (I2C::init() != OK) + if (I2C::init() != OK) { goto out; + } /* allocate basic report buffers */ _reports = new RingBuffer(2, sizeof(struct optical_flow_s)); - if (_reports == nullptr) + if (_reports == nullptr) { goto out; + } /* get a publish handle on the px4flow topic */ struct optical_flow_s zero_report; memset(&zero_report, 0, sizeof(zero_report)); _px4flow_topic = orb_advertise(ORB_ID(optical_flow), &zero_report); - if (_px4flow_topic < 0) - debug("failed to create px4flow object. Did you start uOrb?"); + if (_px4flow_topic < 0) { + warnx("failed to create px4flow object. Did you start uOrb?"); + } ret = OK; /* sensor is ok, but we don't really know if it is within range */ @@ -249,6 +253,17 @@ out: int PX4FLOW::probe() { + uint8_t val[22]; + + // to be sure this is not a ll40ls Lidar (which can also be on + // 0x42) we check if a 22 byte transfer works from address + // 0. The ll40ls gives an error for that, whereas the flow + // happily returns some data + if (transfer(nullptr, 0, &val[0], 22) != OK) { + return -EIO; + } + + // that worked, so start a measurement cycle return measure(); } @@ -260,20 +275,20 @@ PX4FLOW::ioctl(struct file *filp, int cmd, unsigned long arg) case SENSORIOCSPOLLRATE: { switch (arg) { - /* switching to manual polling */ + /* switching to manual polling */ case SENSOR_POLLRATE_MANUAL: stop(); _measure_ticks = 0; return OK; - /* external signalling (DRDY) not supported */ + /* external signalling (DRDY) not supported */ case SENSOR_POLLRATE_EXTERNAL: - /* zero would be bad */ + /* zero would be bad */ case 0: return -EINVAL; - /* set default/max polling rate */ + /* set default/max polling rate */ case SENSOR_POLLRATE_MAX: case SENSOR_POLLRATE_DEFAULT: { /* do we need to start internal polling? */ @@ -283,13 +298,14 @@ PX4FLOW::ioctl(struct file *filp, int cmd, unsigned long arg) _measure_ticks = USEC2TICK(PX4FLOW_CONVERSION_INTERVAL); /* if we need to start the poll state machine, do it */ - if (want_start) + if (want_start) { start(); + } return OK; } - /* adjust to a legal polling interval in Hz */ + /* adjust to a legal polling interval in Hz */ default: { /* do we need to start internal polling? */ bool want_start = (_measure_ticks == 0); @@ -298,15 +314,17 @@ PX4FLOW::ioctl(struct file *filp, int cmd, unsigned long arg) unsigned ticks = USEC2TICK(1000000 / arg); /* check against maximum rate */ - if (ticks < USEC2TICK(PX4FLOW_CONVERSION_INTERVAL)) + if (ticks < USEC2TICK(PX4FLOW_CONVERSION_INTERVAL)) { return -EINVAL; + } /* update interval for next measurement */ _measure_ticks = ticks; /* if we need to start the poll state machine, do it */ - if (want_start) + if (want_start) { start(); + } return OK; } @@ -314,25 +332,29 @@ PX4FLOW::ioctl(struct file *filp, int cmd, unsigned long arg) } case SENSORIOCGPOLLRATE: - if (_measure_ticks == 0) + if (_measure_ticks == 0) { return SENSOR_POLLRATE_MANUAL; + } return (1000 / _measure_ticks); case SENSORIOCSQUEUEDEPTH: { - /* lower bound is mandatory, upper bound is a sanity check */ - if ((arg < 1) || (arg > 100)) - return -EINVAL; + /* lower bound is mandatory, upper bound is a sanity check */ + if ((arg < 1) || (arg > 100)) { + return -EINVAL; + } + + irqstate_t flags = irqsave(); + + if (!_reports->resize(arg)) { + irqrestore(flags); + return -ENOMEM; + } - irqstate_t flags = irqsave(); - if (!_reports->resize(arg)) { irqrestore(flags); - return -ENOMEM; - } - irqrestore(flags); - return OK; - } + return OK; + } case SENSORIOCGQUEUEDEPTH: return _reports->size(); @@ -355,8 +377,9 @@ PX4FLOW::read(struct file *filp, char *buffer, size_t buflen) int ret = 0; /* buffer must be large enough */ - if (count < 1) + if (count < 1) { return -ENOSPC; + } /* if automatic measurement is enabled */ if (_measure_ticks > 0) { @@ -417,13 +440,11 @@ PX4FLOW::measure() uint8_t cmd = PX4FLOW_REG; ret = transfer(&cmd, 1, nullptr, 0); - if (OK != ret) - { + if (OK != ret) { perf_count(_comms_errors); - log("i2c::transfer returned %d", ret); - printf("i2c::transfer flow returned %d"); return ret; } + ret = OK; return ret; @@ -435,15 +456,14 @@ PX4FLOW::collect() int ret = -EIO; /* read from the sensor */ - uint8_t val[22] = {0, 0,0, 0,0, 0,0, 0,0, 0,0, 0,0, 0,0, 0,0, 0,0, 0,0, 0}; + uint8_t val[22] = {0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0}; perf_begin(_sample_perf); ret = transfer(nullptr, 0, &val[0], 22); - if (ret < 0) - { - log("error reading from sensor: %d", ret); + if (ret < 0) { + debug("error reading from sensor: %d", ret); perf_count(_comms_errors); perf_end(_sample_perf); return ret; @@ -467,12 +487,12 @@ PX4FLOW::collect() int16_t gdist = val[21] << 8 | val[20]; struct optical_flow_s report; - report.flow_comp_x_m = float(flowcx)/1000.0f; - report.flow_comp_y_m = float(flowcy)/1000.0f; - report.flow_raw_x= val[3] << 8 | val[2]; - report.flow_raw_y= val[5] << 8 | val[4]; - report.ground_distance_m =float(gdist)/1000.0f; - report.quality= val[10]; + report.flow_comp_x_m = float(flowcx) / 1000.0f; + report.flow_comp_y_m = float(flowcy) / 1000.0f; + report.flow_raw_x = val[3] << 8 | val[2]; + report.flow_raw_y = val[5] << 8 | val[4]; + report.ground_distance_m = float(gdist) / 1000.0f; + report.quality = val[10]; report.sensor_id = 0; report.timestamp = hrt_absolute_time(); @@ -509,11 +529,13 @@ PX4FLOW::start() true, true, true, - SUBSYSTEM_TYPE_OPTICALFLOW}; + SUBSYSTEM_TYPE_OPTICALFLOW + }; static orb_advert_t pub = -1; if (pub > 0) { orb_publish(ORB_ID(subsystem_info), pub, &info); + } else { pub = orb_advertise(ORB_ID(subsystem_info), &info); } @@ -541,7 +563,7 @@ PX4FLOW::cycle() /* perform collection */ if (OK != collect()) { - log("collection error"); + debug("collection error"); /* restart the measurement state machine */ start(); return; @@ -567,8 +589,9 @@ PX4FLOW::cycle() } /* measurement phase */ - if (OK != measure()) - log("measure error"); + if (OK != measure()) { + debug("measure error"); + } /* next phase is collection */ _collect_phase = true; @@ -619,33 +642,37 @@ start() { int fd; - if (g_dev != nullptr) + if (g_dev != nullptr) { errx(1, "already started"); + } /* create the driver */ g_dev = new PX4FLOW(PX4FLOW_BUS); - if (g_dev == nullptr) + if (g_dev == nullptr) { goto fail; + } - if (OK != g_dev->init()) + if (OK != g_dev->init()) { goto fail; + } /* set the poll rate to default, starts automatic data collection */ fd = open(PX4FLOW_DEVICE_PATH, O_RDONLY); - if (fd < 0) + if (fd < 0) { goto fail; + } - if (ioctl(fd, SENSORIOCSPOLLRATE, SENSOR_POLLRATE_MAX) < 0) + if (ioctl(fd, SENSORIOCSPOLLRATE, SENSOR_POLLRATE_MAX) < 0) { goto fail; + } exit(0); fail: - if (g_dev != nullptr) - { + if (g_dev != nullptr) { delete g_dev; g_dev = nullptr; } @@ -658,15 +685,14 @@ fail: */ void stop() { - if (g_dev != nullptr) - { + if (g_dev != nullptr) { delete g_dev; g_dev = nullptr; - } - else - { + + } else { errx(1, "driver not running"); } + exit(0); } @@ -684,14 +710,17 @@ test() int fd = open(PX4FLOW_DEVICE_PATH, O_RDONLY); - if (fd < 0) + if (fd < 0) { err(1, "%s open failed (try 'px4flow start' if the driver is not running", PX4FLOW_DEVICE_PATH); + } /* do a simple demand read */ sz = read(fd, &report, sizeof(report)); if (sz != sizeof(report)) - // err(1, "immediate read failed"); + { + warnx("immediate read failed"); + } warnx("single read"); warnx("flowx: %0.2f m/s", (double)report.flow_comp_x_m); @@ -700,8 +729,9 @@ test() /* start the sensor polling at 2Hz */ - if (OK != ioctl(fd, SENSORIOCSPOLLRATE, 2)) + if (OK != ioctl(fd, SENSORIOCSPOLLRATE, 2)) { errx(1, "failed to set 2Hz poll rate"); + } /* read the sensor 5x and report each value */ for (unsigned i = 0; i < 5; i++) { @@ -712,14 +742,16 @@ test() fds.events = POLLIN; ret = poll(&fds, 1, 2000); - if (ret != 1) + if (ret != 1) { errx(1, "timed out waiting for sensor data"); + } /* now go get it */ sz = read(fd, &report, sizeof(report)); - if (sz != sizeof(report)) + if (sz != sizeof(report)) { err(1, "periodic read failed"); + } warnx("periodic read %u", i); warnx("flowx: %0.2f m/s", (double)report.flow_comp_x_m); @@ -740,14 +772,17 @@ reset() { int fd = open(PX4FLOW_DEVICE_PATH, O_RDONLY); - if (fd < 0) + if (fd < 0) { err(1, "failed "); + } - if (ioctl(fd, SENSORIOCRESET, 0) < 0) + if (ioctl(fd, SENSORIOCRESET, 0) < 0) { err(1, "driver reset failed"); + } - if (ioctl(fd, SENSORIOCSPOLLRATE, SENSOR_POLLRATE_DEFAULT) < 0) + if (ioctl(fd, SENSORIOCSPOLLRATE, SENSOR_POLLRATE_DEFAULT) < 0) { err(1, "driver poll restart failed"); + } exit(0); } @@ -758,8 +793,9 @@ reset() void info() { - if (g_dev == nullptr) + if (g_dev == nullptr) { errx(1, "driver not running"); + } printf("state @ %p\n", g_dev); g_dev->print_info(); @@ -775,32 +811,37 @@ px4flow_main(int argc, char *argv[]) /* * Start/load the driver. */ - if (!strcmp(argv[1], "start")) + if (!strcmp(argv[1], "start")) { px4flow::start(); + } - /* - * Stop the driver - */ - if (!strcmp(argv[1], "stop")) - px4flow::stop(); + /* + * Stop the driver + */ + if (!strcmp(argv[1], "stop")) { + px4flow::stop(); + } /* * Test the driver/device. */ - if (!strcmp(argv[1], "test")) + if (!strcmp(argv[1], "test")) { px4flow::test(); + } /* * Reset the driver. */ - if (!strcmp(argv[1], "reset")) + if (!strcmp(argv[1], "reset")) { px4flow::reset(); + } /* * Print driver information. */ - if (!strcmp(argv[1], "info") || !strcmp(argv[1], "status")) + if (!strcmp(argv[1], "info") || !strcmp(argv[1], "status")) { px4flow::info(); + } errx(1, "unrecognized command, try 'start', 'test', 'reset' or 'info'"); } diff --git a/src/drivers/px4fmu/fmu.cpp b/src/drivers/px4fmu/fmu.cpp index 122a3cd17..3d3e1b0eb 100644 --- a/src/drivers/px4fmu/fmu.cpp +++ b/src/drivers/px4fmu/fmu.cpp @@ -829,6 +829,7 @@ PX4FMU::pwm_ioctl(file *filp, int cmd, unsigned long arg) case PWM_SERVO_SET_ARM_OK: case PWM_SERVO_CLEAR_ARM_OK: case PWM_SERVO_SET_FORCE_SAFETY_OFF: + case PWM_SERVO_SET_FORCE_SAFETY_ON: // these are no-ops, as no safety switch break; diff --git a/src/drivers/px4fmu/module.mk b/src/drivers/px4fmu/module.mk index a60f1a434..a06323a52 100644 --- a/src/drivers/px4fmu/module.mk +++ b/src/drivers/px4fmu/module.mk @@ -8,3 +8,5 @@ SRCS = fmu.cpp MODULE_STACKSIZE = 1200 EXTRACXXFLAGS = -Weffc++ + +MAXOPTIMIZATION = -Os diff --git a/src/drivers/px4io/module.mk b/src/drivers/px4io/module.mk index 5b838fb75..924283356 100644 --- a/src/drivers/px4io/module.mk +++ b/src/drivers/px4io/module.mk @@ -48,3 +48,5 @@ INCLUDE_DIRS += $(NUTTX_SRC)/arch/arm/src/stm32 $(NUTTX_SRC)/arch/arm/src/com MODULE_STACKSIZE = 1200 EXTRACXXFLAGS = -Weffc++ + +MAXOPTIMIZATION = -Os diff --git a/src/drivers/px4io/px4io.cpp b/src/drivers/px4io/px4io.cpp index d212be766..519ba663a 100644 --- a/src/drivers/px4io/px4io.cpp +++ b/src/drivers/px4io/px4io.cpp @@ -1245,30 +1245,43 @@ PX4IO::io_set_rc_config() * for compatibility reasons with existing * autopilots / GCS'. */ - param_get(param_find("RC_MAP_ROLL"), &ichan); - if ((ichan >= 0) && (ichan < (int)_max_rc_input)) + /* ROLL */ + param_get(param_find("RC_MAP_ROLL"), &ichan); + if ((ichan > 0) && (ichan <= (int)_max_rc_input)) { input_map[ichan - 1] = 0; + } + /* PITCH */ param_get(param_find("RC_MAP_PITCH"), &ichan); - - if ((ichan >= 0) && (ichan < (int)_max_rc_input)) + if ((ichan > 0) && (ichan <= (int)_max_rc_input)) { input_map[ichan - 1] = 1; + } + /* YAW */ param_get(param_find("RC_MAP_YAW"), &ichan); - - if ((ichan >= 0) && (ichan < (int)_max_rc_input)) + if ((ichan > 0) && (ichan <= (int)_max_rc_input)) { input_map[ichan - 1] = 2; + } + /* THROTTLE */ param_get(param_find("RC_MAP_THROTTLE"), &ichan); - - if ((ichan >= 0) && (ichan < (int)_max_rc_input)) + if ((ichan > 0) && (ichan <= (int)_max_rc_input)) { input_map[ichan - 1] = 3; + } - param_get(param_find("RC_MAP_MODE_SW"), &ichan); - - if ((ichan >= 0) && (ichan < (int)_max_rc_input)) + /* FLAPS */ + param_get(param_find("RC_MAP_FLAPS"), &ichan); + if ((ichan > 0) && (ichan <= (int)_max_rc_input)) { input_map[ichan - 1] = 4; + } + + /* MAIN MODE SWITCH */ + param_get(param_find("RC_MAP_MODE_SW"), &ichan); + if ((ichan > 0) && (ichan <= (int)_max_rc_input)) { + /* use out of normal bounds index to indicate special channel */ + input_map[ichan - 1] = PX4IO_P_RC_CONFIG_ASSIGNMENT_MODESWITCH; + } /* * Iterate all possible RC inputs. @@ -1644,10 +1657,6 @@ PX4IO::io_publish_raw_rc() int PX4IO::io_publish_pwm_outputs() { - /* if no FMU comms(!) just don't publish */ - if (!(_status & PX4IO_P_STATUS_FLAGS_FMU_OK)) - return OK; - /* data we are going to fetch */ actuator_outputs_s outputs; outputs.timestamp = hrt_absolute_time(); @@ -2048,7 +2057,7 @@ PX4IO::print_status(bool extended_status) ((features & PX4IO_P_SETUP_FEATURES_ADC_RSSI) ? " RSSI_ADC" : "") ); uint16_t arming = io_reg_get(PX4IO_PAGE_SETUP, PX4IO_P_SETUP_ARMING); - printf("arming 0x%04x%s%s%s%s%s%s%s%s\n", + printf("arming 0x%04x%s%s%s%s%s%s%s%s%s%s\n", arming, ((arming & PX4IO_P_SETUP_ARMING_FMU_ARMED) ? " FMU_ARMED" : " FMU_DISARMED"), ((arming & PX4IO_P_SETUP_ARMING_IO_ARM_OK) ? " IO_ARM_OK" : " IO_ARM_DENIED"), @@ -2058,7 +2067,8 @@ PX4IO::print_status(bool extended_status) ((arming & PX4IO_P_SETUP_ARMING_ALWAYS_PWM_ENABLE) ? " ALWAYS_PWM_ENABLE" : ""), ((arming & PX4IO_P_SETUP_ARMING_LOCKDOWN) ? " LOCKDOWN" : ""), ((arming & PX4IO_P_SETUP_ARMING_FORCE_FAILSAFE) ? " FORCE_FAILSAFE" : ""), - ((arming & PX4IO_P_SETUP_ARMING_TERMINATION_FAILSAFE) ? " TERM_FAILSAFE" : "") + ((arming & PX4IO_P_SETUP_ARMING_TERMINATION_FAILSAFE) ? " TERM_FAILSAFE" : ""), + ((arming & PX4IO_P_SETUP_ARMING_OVERRIDE_IMMEDIATE) ? " OVERRIDE_IMMEDIATE" : "") ); #ifdef CONFIG_ARCH_BOARD_PX4FMU_V1 printf("rates 0x%04x default %u alt %u relays 0x%04x\n", @@ -2271,6 +2281,11 @@ PX4IO::ioctl(file * filep, int cmd, unsigned long arg) ret = io_reg_set(PX4IO_PAGE_SETUP, PX4IO_P_SETUP_FORCE_SAFETY_OFF, PX4IO_FORCE_SAFETY_MAGIC); break; + case PWM_SERVO_SET_FORCE_SAFETY_ON: + /* force safety switch on */ + ret = io_reg_set(PX4IO_PAGE_SETUP, PX4IO_P_SETUP_FORCE_SAFETY_ON, PX4IO_FORCE_SAFETY_MAGIC); + break; + case PWM_SERVO_SET_FORCE_FAILSAFE: /* force failsafe mode instantly */ if (arg == 0) { @@ -2293,6 +2308,19 @@ PX4IO::ioctl(file * filep, int cmd, unsigned long arg) } break; + case PWM_SERVO_SET_OVERRIDE_IMMEDIATE: + /* control whether override on FMU failure is + immediate or waits for override threshold on mode + switch */ + if (arg == 0) { + /* clear override immediate flag */ + ret = io_reg_modify(PX4IO_PAGE_SETUP, PX4IO_P_SETUP_ARMING, PX4IO_P_SETUP_ARMING_OVERRIDE_IMMEDIATE, 0); + } else { + /* set override immediate flag */ + ret = io_reg_modify(PX4IO_PAGE_SETUP, PX4IO_P_SETUP_ARMING, 0, PX4IO_P_SETUP_ARMING_OVERRIDE_IMMEDIATE); + } + break; + case DSM_BIND_START: /* only allow DSM2, DSM-X and DSM-X with more than 7 channels */ @@ -2554,6 +2582,42 @@ PX4IO::ioctl(file * filep, int cmd, unsigned long arg) break; + case PWM_SERVO_SET_RC_CONFIG: { + /* enable setting of RC configuration without relying + on param_get() + */ + struct pwm_output_rc_config* config = (struct pwm_output_rc_config*)arg; + if (config->channel >= _max_actuators) { + /* fail with error */ + return E2BIG; + } + + /* copy values to registers in IO */ + uint16_t regs[PX4IO_P_RC_CONFIG_STRIDE]; + uint16_t offset = config->channel * PX4IO_P_RC_CONFIG_STRIDE; + regs[PX4IO_P_RC_CONFIG_MIN] = config->rc_min; + regs[PX4IO_P_RC_CONFIG_CENTER] = config->rc_trim; + regs[PX4IO_P_RC_CONFIG_MAX] = config->rc_max; + regs[PX4IO_P_RC_CONFIG_DEADZONE] = config->rc_dz; + regs[PX4IO_P_RC_CONFIG_ASSIGNMENT] = config->rc_assignment; + regs[PX4IO_P_RC_CONFIG_OPTIONS] = PX4IO_P_RC_CONFIG_OPTIONS_ENABLED; + if (config->rc_reverse) { + regs[PX4IO_P_RC_CONFIG_OPTIONS] |= PX4IO_P_RC_CONFIG_OPTIONS_REVERSE; + } + ret = io_reg_set(PX4IO_PAGE_RC_CONFIG, offset, regs, PX4IO_P_RC_CONFIG_STRIDE); + break; + } + + case PWM_SERVO_SET_OVERRIDE_OK: + /* set the 'OVERRIDE OK' bit */ + ret = io_reg_modify(PX4IO_PAGE_SETUP, PX4IO_P_SETUP_ARMING, 0, PX4IO_P_SETUP_ARMING_MANUAL_OVERRIDE_OK); + break; + + case PWM_SERVO_CLEAR_OVERRIDE_OK: + /* clear the 'OVERRIDE OK' bit */ + ret = io_reg_modify(PX4IO_PAGE_SETUP, PX4IO_P_SETUP_ARMING, PX4IO_P_SETUP_ARMING_MANUAL_OVERRIDE_OK, 0); + break; + default: /* see if the parent class can make any use of it */ ret = CDev::ioctl(filep, cmd, arg); diff --git a/src/drivers/stm32/adc/module.mk b/src/drivers/stm32/adc/module.mk index 48620feea..38ea490a0 100644 --- a/src/drivers/stm32/adc/module.mk +++ b/src/drivers/stm32/adc/module.mk @@ -40,3 +40,5 @@ MODULE_COMMAND = adc SRCS = adc.cpp INCLUDE_DIRS += $(NUTTX_SRC)/arch/arm/src/stm32 $(NUTTX_SRC)/arch/arm/src/common + +MAXOPTIMIZATION = -Os diff --git a/src/drivers/stm32/module.mk b/src/drivers/stm32/module.mk index bb751c7f6..54428e270 100644 --- a/src/drivers/stm32/module.mk +++ b/src/drivers/stm32/module.mk @@ -41,3 +41,5 @@ SRCS = drv_hrt.c \ drv_pwm_servo.c INCLUDE_DIRS += $(NUTTX_SRC)/arch/arm/src/stm32 $(NUTTX_SRC)/arch/arm/src/common + +MAXOPTIMIZATION = -Os diff --git a/src/drivers/stm32/tone_alarm/module.mk b/src/drivers/stm32/tone_alarm/module.mk index 827cf30b2..25a194ef6 100644 --- a/src/drivers/stm32/tone_alarm/module.mk +++ b/src/drivers/stm32/tone_alarm/module.mk @@ -40,3 +40,5 @@ MODULE_COMMAND = tone_alarm SRCS = tone_alarm.cpp INCLUDE_DIRS += $(NUTTX_SRC)/arch/arm/src/stm32 $(NUTTX_SRC)/arch/arm/src/common + +MAXOPTIMIZATION = -Os diff --git a/src/lib/conversion/rotation.h b/src/lib/conversion/rotation.h index 5187b448f..917c7f830 100644 --- a/src/lib/conversion/rotation.h +++ b/src/lib/conversion/rotation.h @@ -74,6 +74,7 @@ enum Rotation { ROTATION_ROLL_270_YAW_135 = 23, ROTATION_PITCH_90 = 24, ROTATION_PITCH_270 = 25, + ROTATION_ROLL_270_YAW_270 = 26, ROTATION_MAX }; @@ -109,7 +110,8 @@ const rot_lookup_t rot_lookup[] = { {270, 0, 90 }, {270, 0, 135 }, { 0, 90, 0 }, - { 0, 270, 0 } + { 0, 270, 0 }, + {270, 0, 270 } }; /** diff --git a/src/lib/external_lgpl/tecs/tecs.cpp b/src/lib/external_lgpl/tecs/tecs.cpp index 6a2a61b04..cfcc48b62 100644 --- a/src/lib/external_lgpl/tecs/tecs.cpp +++ b/src/lib/external_lgpl/tecs/tecs.cpp @@ -299,7 +299,7 @@ void TECS::_update_throttle(float throttle_cruise, const math::Matrix<3,3> &rotM // Calculate throttle demand // If underspeed condition is set, then demand full throttle if (_underspeed) { - _throttle_dem_unc = 1.0f; + _throttle_dem = 1.0f; } else { // Calculate gain scaler from specific energy error to throttle @@ -321,31 +321,29 @@ void TECS::_update_throttle(float throttle_cruise, const math::Matrix<3,3> &rotM ff_throttle = nomThr - STEdot_dem / _STEdot_min * nomThr; } - // Calculate PD + FF throttle + // Calculate PD + FF throttle and constrain to avoid blow-up of the integrator later _throttle_dem = (_STE_error + STEdot_error * _thrDamp) * K_STE2Thr + ff_throttle; + _throttle_dem = constrain(_throttle_dem, _THRminf, _THRmaxf); // Rate limit PD + FF throttle // Calculate the throttle increment from the specified slew time if (fabsf(_throttle_slewrate) > 0.01f) { float thrRateIncr = _DT * (_THRmaxf - _THRminf) * _throttle_slewrate; - _throttle_dem = constrain(_throttle_dem, - _last_throttle_dem - thrRateIncr, - _last_throttle_dem + thrRateIncr); + _last_throttle_dem - thrRateIncr, + _last_throttle_dem + thrRateIncr); } // Ensure _last_throttle_dem is always initialized properly - // Also: The throttle_slewrate limit is only applied to throttle_dem, but does not limit the integrator!! _last_throttle_dem = _throttle_dem; - // Calculate integrator state upper and lower limits - // Set to a value thqat will allow 0.1 (10%) throttle saturation to allow for noise on the demand + // Set to a value that will allow 0.1 (10%) throttle saturation to allow for noise on the demand float integ_max = (_THRmaxf - _throttle_dem + 0.1f); float integ_min = (_THRminf - _throttle_dem - 0.1f); // Calculate integrator state, constraining state - // Set integrator to a max throttle value dduring climbout + // Set integrator to a max throttle value during climbout _integ6_state = _integ6_state + (_STE_error * _integGain) * _DT * K_STE2Thr; if (_climbOutDem) { @@ -363,10 +361,10 @@ void TECS::_update_throttle(float throttle_cruise, const math::Matrix<3,3> &rotM } else { _throttle_dem = ff_throttle; } - } - // Constrain throttle demand - _throttle_dem = constrain(_throttle_dem, _THRminf, _THRmaxf); + // Constrain throttle demand + _throttle_dem = constrain(_throttle_dem, _THRminf, _THRmaxf); + } } void TECS::_detect_bad_descent(void) diff --git a/src/lib/external_lgpl/tecs/tecs.h b/src/lib/external_lgpl/tecs/tecs.h index 8ac31de6f..eb45237b7 100644 --- a/src/lib/external_lgpl/tecs/tecs.h +++ b/src/lib/external_lgpl/tecs/tecs.h @@ -345,9 +345,6 @@ private: // climbout mode bool _climbOutDem; - // throttle demand before limiting - float _throttle_dem_unc; - // pitch demand before limiting float _pitch_dem_unc; diff --git a/src/modules/bottle_drop/bottle_drop.cpp b/src/modules/bottle_drop/bottle_drop.cpp index 31c9157e1..e0bcbc6e9 100644 --- a/src/modules/bottle_drop/bottle_drop.cpp +++ b/src/modules/bottle_drop/bottle_drop.cpp @@ -223,7 +223,7 @@ BottleDrop::start() _main_task = task_spawn_cmd("bottle_drop", SCHED_DEFAULT, SCHED_PRIORITY_DEFAULT + 15, - 2048, + 1500, (main_t)&BottleDrop::task_main_trampoline, nullptr); @@ -283,7 +283,6 @@ BottleDrop::drop() // force the door open if we have to if (_doors_opened == 0) { open_bay(); - warnx("bay not ready, forced open"); } while (hrt_elapsed_time(&_doors_opened) < 500 * 1000 && hrt_elapsed_time(&starttime) < 2000000) { @@ -723,16 +722,16 @@ BottleDrop::handle_command(struct vehicle_command_s *cmd) if (cmd->param1 > 0.5f && cmd->param2 > 0.5f) { open_bay(); drop(); - mavlink_log_info(_mavlink_fd, "#audio: drop bottle"); + mavlink_log_critical(_mavlink_fd, "drop bottle"); } else if (cmd->param1 > 0.5f) { open_bay(); - mavlink_log_info(_mavlink_fd, "#audio: opening bay"); + mavlink_log_critical(_mavlink_fd, "opening bay"); } else { lock_release(); close_bay(); - mavlink_log_info(_mavlink_fd, "#audio: closing bay"); + mavlink_log_critical(_mavlink_fd, "closing bay"); } answer_command(cmd, VEHICLE_CMD_RESULT_ACCEPTED); @@ -743,12 +742,12 @@ BottleDrop::handle_command(struct vehicle_command_s *cmd) switch ((int)(cmd->param1 + 0.5f)) { case 0: _drop_approval = false; - mavlink_log_info(_mavlink_fd, "#audio: got drop position, no approval"); + mavlink_log_critical(_mavlink_fd, "got drop position, no approval"); break; case 1: _drop_approval = true; - mavlink_log_info(_mavlink_fd, "#audio: got drop position and approval"); + mavlink_log_critical(_mavlink_fd, "got drop position and approval"); break; default: @@ -818,19 +817,19 @@ BottleDrop::answer_command(struct vehicle_command_s *cmd, enum VEHICLE_CMD_RESUL break; case VEHICLE_CMD_RESULT_DENIED: - mavlink_log_critical(_mavlink_fd, "#audio: command denied: %u", cmd->command); + mavlink_log_critical(_mavlink_fd, "command denied: %u", cmd->command); break; case VEHICLE_CMD_RESULT_FAILED: - mavlink_log_critical(_mavlink_fd, "#audio: command failed: %u", cmd->command); + mavlink_log_critical(_mavlink_fd, "command failed: %u", cmd->command); break; case VEHICLE_CMD_RESULT_TEMPORARILY_REJECTED: - mavlink_log_critical(_mavlink_fd, "#audio: command temporarily rejected: %u", cmd->command); + mavlink_log_critical(_mavlink_fd, "command temporarily rejected: %u", cmd->command); break; case VEHICLE_CMD_RESULT_UNSUPPORTED: - mavlink_log_critical(_mavlink_fd, "#audio: command unsupported: %u", cmd->command); + mavlink_log_critical(_mavlink_fd, "command unsupported: %u", cmd->command); break; default: diff --git a/src/modules/bottle_drop/module.mk b/src/modules/bottle_drop/module.mk index 6b18fff55..df9f5473b 100644 --- a/src/modules/bottle_drop/module.mk +++ b/src/modules/bottle_drop/module.mk @@ -39,3 +39,7 @@ MODULE_COMMAND = bottle_drop SRCS = bottle_drop.cpp \ bottle_drop_params.c + +MAXOPTIMIZATION = -Os + +MODULE_STACKSIZE = 1200 diff --git a/src/modules/commander/accelerometer_calibration.cpp b/src/modules/commander/accelerometer_calibration.cpp index 7a4e7a766..0cb41489f 100644 --- a/src/modules/commander/accelerometer_calibration.cpp +++ b/src/modules/commander/accelerometer_calibration.cpp @@ -83,7 +83,7 @@ * | accel_T[1][i] | * [ accel_T[2][i] ] * - * b = [ accel_corr_ref[0][i] ] // One measurement per axis is enough + * b = [ accel_corr_ref[0][i] ] // One measurement per side is enough * | accel_corr_ref[2][i] | * [ accel_corr_ref[4][i] ] * @@ -162,6 +162,11 @@ int do_accel_calibration(int mavlink_fd) mavlink_log_info(mavlink_fd, CAL_STARTED_MSG, sensor_name); + mavlink_log_info(mavlink_fd, "You need to put the system on all six sides"); + sleep(3); + mavlink_log_info(mavlink_fd, "Follow the instructions on the screen"); + sleep(5); + struct accel_scale accel_scale = { 0.0f, 1.0f, @@ -258,7 +263,7 @@ int do_accel_calibration_measurements(int mavlink_fd, float accel_offs[3], float const int samples_num = 2500; float accel_ref[6][3]; bool data_collected[6] = { false, false, false, false, false, false }; - const char *orientation_strs[6] = { "x+", "x-", "y+", "y-", "z+", "z-" }; + const char *orientation_strs[6] = { "front", "back", "left", "right", "top", "bottom" }; int sensor_combined_sub = orb_subscribe(ORB_ID(sensor_combined)); @@ -287,29 +292,37 @@ int do_accel_calibration_measurements(int mavlink_fd, float accel_offs[3], float break; } - mavlink_log_info(mavlink_fd, "directions left: %s%s%s%s%s%s", - (!data_collected[0]) ? "x+ " : "", - (!data_collected[1]) ? "x- " : "", - (!data_collected[2]) ? "y+ " : "", - (!data_collected[3]) ? "y- " : "", - (!data_collected[4]) ? "z+ " : "", - (!data_collected[5]) ? "z- " : ""); + /* inform user which axes are still needed */ + mavlink_log_info(mavlink_fd, "pending: %s%s%s%s%s%s", + (!data_collected[0]) ? "front " : "", + (!data_collected[1]) ? "back " : "", + (!data_collected[2]) ? "left " : "", + (!data_collected[3]) ? "right " : "", + (!data_collected[4]) ? "up " : "", + (!data_collected[5]) ? "down " : ""); + + /* allow user enough time to read the message */ + sleep(3); int orient = detect_orientation(mavlink_fd, sensor_combined_sub); if (orient < 0) { - res = ERROR; - break; + mavlink_log_info(mavlink_fd, "invalid motion, hold still..."); + sleep(3); + continue; } + /* inform user about already handled side */ if (data_collected[orient]) { - mavlink_log_info(mavlink_fd, "%s done, rotate to a different axis", orientation_strs[orient]); + mavlink_log_info(mavlink_fd, "%s side done, rotate to a different side", orientation_strs[orient]); + sleep(4); continue; } - mavlink_log_info(mavlink_fd, "accel measurement started: %s axis", orientation_strs[orient]); + mavlink_log_info(mavlink_fd, "Hold still, starting to measure %s side", orientation_strs[orient]); + sleep(1); read_accelerometer_avg(sensor_combined_sub, &(accel_ref[orient][0]), samples_num); - mavlink_log_info(mavlink_fd, "result for %s axis: [ %.2f %.2f %.2f ]", orientation_strs[orient], + mavlink_log_info(mavlink_fd, "result for %s side: [ %.2f %.2f %.2f ]", orientation_strs[orient], (double)accel_ref[orient][0], (double)accel_ref[orient][1], (double)accel_ref[orient][2]); @@ -400,7 +413,7 @@ int detect_orientation(int mavlink_fd, int sub_sensor_combined) /* is still now */ if (t_still == 0) { /* first time */ - mavlink_log_info(mavlink_fd, "detected rest position, waiting..."); + mavlink_log_info(mavlink_fd, "detected rest position, hold still..."); t_still = t; t_timeout = t + timeout; @@ -418,6 +431,7 @@ int detect_orientation(int mavlink_fd, int sub_sensor_combined) /* not still, reset still start time */ if (t_still != 0) { mavlink_log_info(mavlink_fd, "detected motion, hold still..."); + sleep(3); t_still = 0; } } diff --git a/src/modules/commander/airspeed_calibration.cpp b/src/modules/commander/airspeed_calibration.cpp index 339b11bbe..cae1d7684 100644 --- a/src/modules/commander/airspeed_calibration.cpp +++ b/src/modules/commander/airspeed_calibration.cpp @@ -61,6 +61,15 @@ static const int ERROR = -1; static const char *sensor_name = "dpress"; +#define HUMAN_ASPD_CAL_FAILED_MSG "Calibration failed, see http://px4.io/help/aspd" + +static void feedback_calibration_failed(int mavlink_fd) +{ + sleep(5); + mavlink_log_critical(mavlink_fd, CAL_FAILED_MSG, sensor_name); + mavlink_log_critical(mavlink_fd, HUMAN_ASPD_CAL_FAILED_MSG); +} + int do_airspeed_calibration(int mavlink_fd) { /* give directions */ @@ -99,7 +108,7 @@ int do_airspeed_calibration(int mavlink_fd) float analog_scaling = 0.0f; param_get(param_find("SENS_DPRES_ANSC"), &(analog_scaling)); if (fabsf(analog_scaling) < 0.1f) { - mavlink_log_critical(mavlink_fd, "If analog sens, retry with [SENS_DPRES_ANSC=1000]"); + mavlink_log_critical(mavlink_fd, "No airspeed sensor, see http://px4.io/help/aspd"); close(diff_pres_sub); return ERROR; } @@ -138,7 +147,7 @@ int do_airspeed_calibration(int mavlink_fd) } else if (poll_ret == 0) { /* any poll failure for 1s is a reason to abort */ - mavlink_log_critical(mavlink_fd, CAL_FAILED_MSG, sensor_name); + feedback_calibration_failed(mavlink_fd); close(diff_pres_sub); return ERROR; } @@ -175,7 +184,7 @@ int do_airspeed_calibration(int mavlink_fd) } } else { - mavlink_log_info(mavlink_fd, CAL_FAILED_MSG, sensor_name); + feedback_calibration_failed(mavlink_fd); close(diff_pres_sub); return ERROR; } @@ -207,7 +216,7 @@ int do_airspeed_calibration(int mavlink_fd) if (fabsf(diff_pres.differential_pressure_raw_pa) < 50.0f) { if (calibration_counter % 500 == 0) { - mavlink_log_info(mavlink_fd, "Create airflow! (%d, wanted: 50 Pa)", + mavlink_log_info(mavlink_fd, "Create air pressure! (got %d, wanted: 50 Pa)", (int)diff_pres.differential_pressure_raw_pa); } continue; @@ -215,9 +224,9 @@ int do_airspeed_calibration(int mavlink_fd) /* do not allow negative values */ if (diff_pres.differential_pressure_raw_pa < 0.0f) { - mavlink_log_critical(mavlink_fd, "Swap static and dynamic ports!"); mavlink_log_info(mavlink_fd, "ERROR: Negative pressure difference detected! (%d Pa)", (int)diff_pres.differential_pressure_raw_pa); + mavlink_log_critical(mavlink_fd, "Swap static and dynamic ports!"); close(diff_pres_sub); /* the user setup is wrong, wipe the calibration to force a proper re-calibration */ @@ -235,7 +244,7 @@ int do_airspeed_calibration(int mavlink_fd) close(diff_pres_sub); - mavlink_log_info(mavlink_fd, CAL_FAILED_MSG, sensor_name); + feedback_calibration_failed(mavlink_fd); return ERROR; } else { mavlink_log_info(mavlink_fd, "Positive pressure: OK (%d Pa)", @@ -245,14 +254,14 @@ int do_airspeed_calibration(int mavlink_fd) } else if (poll_ret == 0) { /* any poll failure for 1s is a reason to abort */ - mavlink_log_critical(mavlink_fd, CAL_FAILED_MSG, sensor_name); + feedback_calibration_failed(mavlink_fd); close(diff_pres_sub); return ERROR; } } if (calibration_counter == maxcount) { - mavlink_log_critical(mavlink_fd, CAL_FAILED_MSG, sensor_name); + feedback_calibration_failed(mavlink_fd); close(diff_pres_sub); return ERROR; } diff --git a/src/modules/commander/commander.cpp b/src/modules/commander/commander.cpp index 1f13aaec4..deb048566 100644 --- a/src/modules/commander/commander.cpp +++ b/src/modules/commander/commander.cpp @@ -207,7 +207,9 @@ void usage(const char *reason); /** * React to commands that are sent e.g. from the mavlink module. */ -bool handle_command(struct vehicle_status_s *status, const struct safety_s *safety, struct vehicle_command_s *cmd, struct actuator_armed_s *armed, struct home_position_s *home, struct vehicle_global_position_s *global_pos, orb_advert_t *home_pub); +bool handle_command(struct vehicle_status_s *status, const struct safety_s *safety, struct vehicle_command_s *cmd, + struct actuator_armed_s *armed, struct home_position_s *home, struct vehicle_global_position_s *global_pos, + orb_advert_t *home_pub); /** * Mainloop of commander. @@ -218,8 +220,6 @@ void control_status_leds(vehicle_status_s *status, const actuator_armed_s *actua void check_valid(hrt_abstime timestamp, hrt_abstime timeout, bool valid_in, bool *valid_out, bool *changed); -void check_mode_switches(struct manual_control_setpoint_s *sp_man, struct vehicle_status_s *status); - transition_result_t set_main_state_rc(struct vehicle_status_s *status, struct manual_control_setpoint_s *sp_man); void set_control_mode(); @@ -230,7 +230,8 @@ void print_reject_arm(const char *msg); void print_status(); -transition_result_t check_navigation_state_machine(struct vehicle_status_s *status, struct vehicle_control_mode_s *control_mode, struct vehicle_local_position_s *local_pos); +transition_result_t check_navigation_state_machine(struct vehicle_status_s *status, + struct vehicle_control_mode_s *control_mode, struct vehicle_local_position_s *local_pos); transition_result_t arm_disarm(bool arm, const int mavlink_fd, const char *armedBy); @@ -260,7 +261,7 @@ int commander_main(int argc, char *argv[]) daemon_task = task_spawn_cmd("commander", SCHED_DEFAULT, SCHED_PRIORITY_MAX - 40, - 2950, + 3200, commander_thread_main, (argv) ? (const char **)&argv[2] : (const char **)NULL); @@ -393,7 +394,8 @@ transition_result_t arm_disarm(bool arm, const int mavlink_fd_local, const char // Transition the armed state. By passing mavlink_fd to arming_state_transition it will // output appropriate error messages if the state cannot transition. - arming_res = arming_state_transition(&status, &safety, arm ? ARMING_STATE_ARMED : ARMING_STATE_STANDBY, &armed, true /* fRunPreArmChecks */, mavlink_fd_local); + arming_res = arming_state_transition(&status, &safety, arm ? ARMING_STATE_ARMED : ARMING_STATE_STANDBY, &armed, + true /* fRunPreArmChecks */, mavlink_fd_local); if (arming_res == TRANSITION_CHANGED && mavlink_fd) { mavlink_log_info(mavlink_fd_local, "[cmd] %s by %s", arm ? "ARMED" : "DISARMED", armedBy); @@ -406,11 +408,12 @@ transition_result_t arm_disarm(bool arm, const int mavlink_fd_local, const char } bool handle_command(struct vehicle_status_s *status_local, const struct safety_s *safety_local, - struct vehicle_command_s *cmd, struct actuator_armed_s *armed_local, - struct home_position_s *home, struct vehicle_global_position_s *global_pos, orb_advert_t *home_pub) + struct vehicle_command_s *cmd, struct actuator_armed_s *armed_local, + struct home_position_s *home, struct vehicle_global_position_s *global_pos, orb_advert_t *home_pub) { /* only handle commands that are meant to be handled by this system and component */ - if (cmd->target_system != status_local->system_id || ((cmd->target_component != status_local->component_id) && (cmd->target_component != 0))) { // component_id 0: valid for all components + if (cmd->target_system != status_local->system_id || ((cmd->target_component != status_local->component_id) + && (cmd->target_component != 0))) { // component_id 0: valid for all components return false; } @@ -537,13 +540,13 @@ bool handle_command(struct vehicle_status_s *status_local, const struct safety_s } else { mavlink_log_critical(mavlink_fd, "REJ CMD: %.1f %.1f %.1f %.1f %.1f %.1f %.1f %.1f", - (double)cmd->param1, - (double)cmd->param2, - (double)cmd->param3, - (double)cmd->param4, - (double)cmd->param5, - (double)cmd->param6, - (double)cmd->param7); + (double)cmd->param1, + (double)cmd->param2, + (double)cmd->param3, + (double)cmd->param4, + (double)cmd->param5, + (double)cmd->param6, + (double)cmd->param7); } } break; @@ -554,35 +557,43 @@ bool handle_command(struct vehicle_status_s *status_local, const struct safety_s //XXX update state machine? armed_local->force_failsafe = true; warnx("forcing failsafe (termination)"); + } else { armed_local->force_failsafe = false; warnx("disabling failsafe (termination)"); } + /* param2 is currently used for other failsafe modes */ status_local->engine_failure_cmd = false; status_local->data_link_lost_cmd = false; status_local->gps_failure_cmd = false; status_local->rc_signal_lost_cmd = false; + if ((int)cmd->param2 <= 0) { /* reset all commanded failure modes */ warnx("reset all non-flighttermination failsafe commands"); + } else if ((int)cmd->param2 == 1) { /* trigger engine failure mode */ status_local->engine_failure_cmd = true; warnx("engine failure mode commanded"); + } else if ((int)cmd->param2 == 2) { /* trigger data link loss mode */ status_local->data_link_lost_cmd = true; warnx("data link loss mode commanded"); + } else if ((int)cmd->param2 == 3) { /* trigger gps loss mode */ status_local->gps_failure_cmd = true; warnx("gps loss mode commanded"); + } else if ((int)cmd->param2 == 4) { /* trigger rc loss mode */ status_local->rc_signal_lost_cmd = true; warnx("rc loss mode commanded"); } + cmd_result = VEHICLE_CMD_RESULT_ACCEPTED; } break; @@ -633,21 +644,27 @@ bool handle_command(struct vehicle_status_s *status_local, const struct safety_s } } break; + case VEHICLE_CMD_NAV_GUIDED_ENABLE: { transition_result_t res = TRANSITION_DENIED; static main_state_t main_state_pre_offboard = MAIN_STATE_MANUAL; + if (status_local->main_state != MAIN_STATE_OFFBOARD) { main_state_pre_offboard = status_local->main_state; } + if (cmd->param1 > 0.5f) { res = main_state_transition(status_local, MAIN_STATE_OFFBOARD); + if (res == TRANSITION_DENIED) { print_reject_mode(status_local, "OFFBOARD"); status_local->offboard_control_set_by_command = false; + } else { /* Set flag that offboard was set via command, main state is not overridden by rc */ status_local->offboard_control_set_by_command = true; } + } else { /* If the mavlink command is used to enable or disable offboard control: * switch back to previous mode when disabling */ @@ -656,6 +673,7 @@ bool handle_command(struct vehicle_status_s *status_local, const struct safety_s } } break; + case VEHICLE_CMD_PREFLIGHT_REBOOT_SHUTDOWN: case VEHICLE_CMD_PREFLIGHT_CALIBRATION: case VEHICLE_CMD_PREFLIGHT_SET_SENSOR_OFFSETS: @@ -740,7 +758,10 @@ int commander_thread_main(int argc, char *argv[]) nav_states_str[NAVIGATION_STATE_AUTO_MISSION] = "AUTO_MISSION"; nav_states_str[NAVIGATION_STATE_AUTO_LOITER] = "AUTO_LOITER"; nav_states_str[NAVIGATION_STATE_AUTO_RTL] = "AUTO_RTL"; + nav_states_str[NAVIGATION_STATE_AUTO_RCRECOVER] = "AUTO_RCRECOVER"; nav_states_str[NAVIGATION_STATE_AUTO_RTGS] = "AUTO_RTGS"; + nav_states_str[NAVIGATION_STATE_AUTO_LANDENGFAIL] = "AUTO_LANDENGFAIL"; + nav_states_str[NAVIGATION_STATE_AUTO_LANDGPSFAIL] = "AUTO_LANDGPSFAIL"; nav_states_str[NAVIGATION_STATE_ACRO] = "ACRO"; nav_states_str[NAVIGATION_STATE_LAND] = "LAND"; nav_states_str[NAVIGATION_STATE_DESCEND] = "DESCEND"; @@ -802,6 +823,7 @@ int commander_thread_main(int argc, char *argv[]) /* publish initial state */ status_pub = orb_advertise(ORB_ID(vehicle_status), &status); + if (status_pub < 0) { warnx("ERROR: orb_advertise for topic vehicle_status failed (uorb app running?).\n"); warnx("exiting."); @@ -827,11 +849,14 @@ int commander_thread_main(int argc, char *argv[]) /* init mission state, do it here to allow navigator to use stored mission even if mavlink failed to start */ orb_advert_t mission_pub = -1; mission_s mission; + if (dm_read(DM_KEY_MISSION_STATE, 0, &mission, sizeof(mission_s)) == sizeof(mission_s)) { if (mission.dataman_id >= 0 && mission.dataman_id <= 1) { - warnx("loaded mission state: dataman_id=%d, count=%u, current=%d", mission.dataman_id, mission.count, mission.current_seq); + warnx("loaded mission state: dataman_id=%d, count=%u, current=%d", mission.dataman_id, mission.count, + mission.current_seq); mavlink_log_info(mavlink_fd, "[cmd] dataman_id=%d, count=%u, current=%d", - mission.dataman_id, mission.count, mission.current_seq); + mission.dataman_id, mission.count, mission.current_seq); + } else { const char *missionfail = "reading mission state failed"; warnx("%s", missionfail); @@ -1097,6 +1122,7 @@ int commander_thread_main(int argc, char *argv[]) status.offboard_control_signal_lost = false; status_changed = true; } + } else { if (!status.offboard_control_signal_lost) { status.offboard_control_signal_lost = true; @@ -1115,9 +1141,9 @@ int commander_thread_main(int argc, char *argv[]) /* perform system checks when new telemetry link connected */ if (mavlink_fd && - telemetry_last_heartbeat[i] == 0 && - telemetry.heartbeat_time > 0 && - hrt_elapsed_time(&telemetry.heartbeat_time) < datalink_loss_timeout * 1e6) { + telemetry_last_heartbeat[i] == 0 && + telemetry.heartbeat_time > 0 && + hrt_elapsed_time(&telemetry.heartbeat_time) < datalink_loss_timeout * 1e6) { (void)rc_calibration_check(mavlink_fd); } @@ -1130,6 +1156,7 @@ int commander_thread_main(int argc, char *argv[]) if (updated) { orb_copy(ORB_ID(sensor_combined), sensor_sub, &sensors); + /* Check if the barometer is healthy and issue a warning in the GCS if not so. * Because the barometer is used for calculating AMSL altitude which is used to ensure * vertical separation from other airtraffic the operator has to know when the @@ -1142,6 +1169,7 @@ int commander_thread_main(int argc, char *argv[]) status_changed = true; mavlink_log_critical(mavlink_fd, "baro healthy"); } + } else { if (!status.barometer_failure) { status.barometer_failure = true; @@ -1164,10 +1192,11 @@ int commander_thread_main(int argc, char *argv[]) if (hrt_elapsed_time(&system_power.timestamp) < 200000) { if (system_power.servo_valid && - !system_power.brick_valid && - !system_power.usb_connected) { + !system_power.brick_valid && + !system_power.usb_connected) { /* flying only on servo rail, this is unsafe */ status.condition_power_input_valid = false; + } else { status.condition_power_input_valid = true; } @@ -1187,9 +1216,11 @@ int commander_thread_main(int argc, char *argv[]) /* disarm if safety is now on and still armed */ if (status.hil_state == HIL_STATE_OFF && safety.safety_switch_available && !safety.safety_off && armed.armed) { - arming_state_t new_arming_state = (status.arming_state == ARMING_STATE_ARMED ? ARMING_STATE_STANDBY : ARMING_STATE_STANDBY_ERROR); + arming_state_t new_arming_state = (status.arming_state == ARMING_STATE_ARMED ? ARMING_STATE_STANDBY : + ARMING_STATE_STANDBY_ERROR); - if (TRANSITION_CHANGED == arming_state_transition(&status, &safety, new_arming_state, &armed, true /* fRunPreArmChecks */, mavlink_fd)) { + if (TRANSITION_CHANGED == arming_state_transition(&status, &safety, new_arming_state, &armed, + true /* fRunPreArmChecks */, mavlink_fd)) { mavlink_log_info(mavlink_fd, "DISARMED by safety switch"); arming_state_changed = true; } @@ -1233,7 +1264,8 @@ int commander_thread_main(int argc, char *argv[]) } } - check_valid(global_position.timestamp, POSITION_TIMEOUT, eph_good, &(status.condition_global_position_valid), &status_changed); + check_valid(global_position.timestamp, POSITION_TIMEOUT, eph_good, &(status.condition_global_position_valid), + &status_changed); /* update home position */ if (!status.condition_home_position_valid && status.condition_global_position_valid && !armed.armed && @@ -1283,8 +1315,11 @@ int commander_thread_main(int argc, char *argv[]) local_eph_good = false; } } - check_valid(local_position.timestamp, POSITION_TIMEOUT, local_position.xy_valid && local_eph_good, &(status.condition_local_position_valid), &status_changed); - check_valid(local_position.timestamp, POSITION_TIMEOUT, local_position.z_valid, &(status.condition_local_altitude_valid), &status_changed); + + check_valid(local_position.timestamp, POSITION_TIMEOUT, local_position.xy_valid + && local_eph_good, &(status.condition_local_position_valid), &status_changed); + check_valid(local_position.timestamp, POSITION_TIMEOUT, local_position.z_valid, + &(status.condition_local_altitude_valid), &status_changed); if (status.condition_local_altitude_valid) { if (status.condition_landed != local_position.landed) { @@ -1315,7 +1350,8 @@ int commander_thread_main(int argc, char *argv[]) /* get throttle (if armed), as we only care about energy negative throttle also counts */ float throttle = (armed.armed) ? fabsf(actuator_controls.control[3]) : 0.0f; - status.battery_remaining = battery_remaining_estimate_voltage(battery.voltage_filtered_v, battery.discharged_mah, throttle); + status.battery_remaining = battery_remaining_estimate_voltage(battery.voltage_filtered_v, battery.discharged_mah, + throttle); } } @@ -1372,8 +1408,8 @@ int commander_thread_main(int argc, char *argv[]) last_idle_time = system_load.tasks[0].total_runtime; /* check if board is connected via USB */ - //struct stat statbuf; - //on_usb_power = (stat("/dev/ttyACM0", &statbuf) == 0); + struct stat statbuf; + on_usb_power = (stat("/dev/ttyACM0", &statbuf) == 0); } /* if battery voltage is getting lower, warn using buzzer, etc. */ @@ -1383,26 +1419,30 @@ int commander_thread_main(int argc, char *argv[]) status.battery_warning = VEHICLE_BATTERY_WARNING_LOW; status_changed = true; - } else if (status.condition_battery_voltage_valid && status.battery_remaining < 0.09f && !critical_battery_voltage_actions_done && low_battery_voltage_actions_done) { + } else if (!on_usb_power && status.condition_battery_voltage_valid && status.battery_remaining < 0.09f + && !critical_battery_voltage_actions_done && low_battery_voltage_actions_done) { /* critical battery voltage, this is rather an emergency, change state machine */ critical_battery_voltage_actions_done = true; mavlink_log_emergency(mavlink_fd, "CRITICAL BATTERY, LAND IMMEDIATELY"); status.battery_warning = VEHICLE_BATTERY_WARNING_CRITICAL; if (armed.armed) { - arming_ret = arming_state_transition(&status, &safety, ARMING_STATE_ARMED_ERROR, &armed, true /* fRunPreArmChecks */, mavlink_fd); + arming_ret = arming_state_transition(&status, &safety, ARMING_STATE_ARMED_ERROR, &armed, true /* fRunPreArmChecks */, + mavlink_fd); if (arming_ret == TRANSITION_CHANGED) { arming_state_changed = true; } } else { - arming_ret = arming_state_transition(&status, &safety, ARMING_STATE_STANDBY_ERROR, &armed, true /* fRunPreArmChecks */, mavlink_fd); + arming_ret = arming_state_transition(&status, &safety, ARMING_STATE_STANDBY_ERROR, &armed, true /* fRunPreArmChecks */, + mavlink_fd); if (arming_ret == TRANSITION_CHANGED) { arming_state_changed = true; } } + status_changed = true; } @@ -1411,7 +1451,8 @@ int commander_thread_main(int argc, char *argv[]) /* If in INIT state, try to proceed to STANDBY state */ if (status.arming_state == ARMING_STATE_INIT && low_prio_task == LOW_PRIO_TASK_NONE) { /* TODO: check for sensors */ - arming_ret = arming_state_transition(&status, &safety, ARMING_STATE_STANDBY, &armed, true /* fRunPreArmChecks */, mavlink_fd); + arming_ret = arming_state_transition(&status, &safety, ARMING_STATE_STANDBY, &armed, true /* fRunPreArmChecks */, + mavlink_fd); if (arming_ret == TRANSITION_CHANGED) { arming_state_changed = true; @@ -1439,23 +1480,25 @@ int commander_thread_main(int argc, char *argv[]) /* Initialize map projection if gps is valid */ if (!map_projection_global_initialized() - && (gps_position.eph < eph_threshold) - && (gps_position.epv < epv_threshold) - && hrt_elapsed_time((hrt_abstime*)&gps_position.timestamp_position) < 1e6) { + && (gps_position.eph < eph_threshold) + && (gps_position.epv < epv_threshold) + && hrt_elapsed_time((hrt_abstime *)&gps_position.timestamp_position) < 1e6) { /* set reference for global coordinates <--> local coordiantes conversion and map_projection */ - globallocalconverter_init((double)gps_position.lat * 1.0e-7, (double)gps_position.lon * 1.0e-7, (float)gps_position.alt * 1.0e-3f, hrt_absolute_time()); + globallocalconverter_init((double)gps_position.lat * 1.0e-7, (double)gps_position.lon * 1.0e-7, + (float)gps_position.alt * 1.0e-3f, hrt_absolute_time()); } /* check if GPS fix is ok */ if (status.circuit_breaker_engaged_gpsfailure_check || - (gps_position.fix_type >= 3 && - hrt_elapsed_time(&gps_position.timestamp_position) < FAILSAFE_DEFAULT_TIMEOUT)) { + (gps_position.fix_type >= 3 && + hrt_elapsed_time(&gps_position.timestamp_position) < FAILSAFE_DEFAULT_TIMEOUT)) { /* handle the case where gps was regained */ if (status.gps_failure) { status.gps_failure = false; status_changed = true; mavlink_log_critical(mavlink_fd, "gps regained"); } + } else { if (!status.gps_failure) { status.gps_failure = true; @@ -1477,12 +1520,14 @@ int commander_thread_main(int argc, char *argv[]) armed.force_failsafe = true; status_changed = true; static bool flight_termination_printed = false; + if (!flight_termination_printed) { warnx("Flight termination because of navigator request or geofence"); mavlink_log_critical(mavlink_fd, "GF violation: flight termination"); flight_termination_printed = true; } - if (counter % (1000000 / COMMANDER_MONITORING_INTERVAL) == 0 ) { + + if (counter % (1000000 / COMMANDER_MONITORING_INTERVAL) == 0) { mavlink_log_critical(mavlink_fd, "GF violation: flight termination"); } } // no reset is done here on purpose, on geofence violation we want to stay in flighttermination @@ -1490,7 +1535,7 @@ int commander_thread_main(int argc, char *argv[]) /* RC input check */ if (!status.rc_input_blocked && sp_man.timestamp != 0 && - hrt_absolute_time() < sp_man.timestamp + (uint64_t)(rc_loss_timeout * 1e6f)) { + hrt_absolute_time() < sp_man.timestamp + (uint64_t)(rc_loss_timeout * 1e6f)) { /* handle the case where RC signal was regained */ if (!status.rc_signal_found_once) { status.rc_signal_found_once = true; @@ -1515,11 +1560,15 @@ int commander_thread_main(int argc, char *argv[]) if (stick_off_counter > STICK_ON_OFF_COUNTER_LIMIT) { /* disarm to STANDBY if ARMED or to STANDBY_ERROR if ARMED_ERROR */ - arming_state_t new_arming_state = (status.arming_state == ARMING_STATE_ARMED ? ARMING_STATE_STANDBY : ARMING_STATE_STANDBY_ERROR); - arming_ret = arming_state_transition(&status, &safety, new_arming_state, &armed, true /* fRunPreArmChecks */, mavlink_fd); + arming_state_t new_arming_state = (status.arming_state == ARMING_STATE_ARMED ? ARMING_STATE_STANDBY : + ARMING_STATE_STANDBY_ERROR); + arming_ret = arming_state_transition(&status, &safety, new_arming_state, &armed, true /* fRunPreArmChecks */, + mavlink_fd); + if (arming_ret == TRANSITION_CHANGED) { arming_state_changed = true; } + stick_off_counter = 0; } else { @@ -1541,8 +1590,11 @@ int commander_thread_main(int argc, char *argv[]) */ if (status.main_state != MAIN_STATE_MANUAL) { print_reject_arm("NOT ARMING: Switch to MANUAL mode first."); + } else { - arming_ret = arming_state_transition(&status, &safety, ARMING_STATE_ARMED, &armed, true /* fRunPreArmChecks */, mavlink_fd); + arming_ret = arming_state_transition(&status, &safety, ARMING_STATE_ARMED, &armed, true /* fRunPreArmChecks */, + mavlink_fd); + if (arming_ret == TRANSITION_CHANGED) { arming_state_changed = true; } @@ -1565,6 +1617,7 @@ int commander_thread_main(int argc, char *argv[]) } else { mavlink_log_info(mavlink_fd, "DISARMED by RC"); } + arming_state_changed = true; } else if (arming_ret == TRANSITION_DENIED) { @@ -1601,18 +1654,20 @@ int commander_thread_main(int argc, char *argv[]) /* data links check */ bool have_link = false; + for (int i = 0; i < TELEMETRY_STATUS_ORB_ID_NUM; i++) { if (telemetry_last_heartbeat[i] != 0 && - hrt_elapsed_time(&telemetry_last_heartbeat[i]) < datalink_loss_timeout * 1e6) { + hrt_elapsed_time(&telemetry_last_heartbeat[i]) < datalink_loss_timeout * 1e6) { /* handle the case where data link was regained, * accept datalink as healthy only after datalink_regain_timeout seconds * */ if (telemetry_lost[i] && - hrt_elapsed_time(&telemetry_last_dl_loss[i]) > datalink_regain_timeout * 1e6) { + hrt_elapsed_time(&telemetry_last_dl_loss[i]) > datalink_regain_timeout * 1e6) { mavlink_log_critical(mavlink_fd, "data link %i regained", i); telemetry_lost[i] = false; have_link = true; + } else if (!telemetry_lost[i]) { /* telemetry was healthy also in last iteration * we don't have to check a timeout */ @@ -1621,6 +1676,7 @@ int commander_thread_main(int argc, char *argv[]) } else { telemetry_last_dl_loss[i] = hrt_absolute_time(); + if (!telemetry_lost[i]) { mavlink_log_critical(mavlink_fd, "data link %i lost", i); telemetry_lost[i] = true; @@ -1648,24 +1704,26 @@ int commander_thread_main(int argc, char *argv[]) * only for fixed wing for now */ if (!status.circuit_breaker_engaged_enginefailure_check && - status.is_rotary_wing == false && - armed.armed && - ((actuator_controls.control[3] > ef_throttle_thres && - battery.current_a/actuator_controls.control[3] < - ef_current2throttle_thres) || - (status.engine_failure))) { + status.is_rotary_wing == false && + armed.armed && + ((actuator_controls.control[3] > ef_throttle_thres && + battery.current_a / actuator_controls.control[3] < + ef_current2throttle_thres) || + (status.engine_failure))) { /* potential failure, measure time */ if (timestamp_engine_healthy > 0 && - hrt_elapsed_time(×tamp_engine_healthy) > - ef_time_thres * 1e6 && - !status.engine_failure) { - status.engine_failure = true; - status_changed = true; - mavlink_log_critical(mavlink_fd, "Engine Failure"); + hrt_elapsed_time(×tamp_engine_healthy) > + ef_time_thres * 1e6 && + !status.engine_failure) { + status.engine_failure = true; + status_changed = true; + mavlink_log_critical(mavlink_fd, "Engine Failure"); } + } else { /* no failure reset flag */ timestamp_engine_healthy = hrt_absolute_time(); + if (status.engine_failure) { status.engine_failure = false; status_changed = true; @@ -1692,20 +1750,22 @@ int commander_thread_main(int argc, char *argv[]) * If we are not in a manual (RC stick controlled mode) * and both failed we want to terminate the flight */ if (status.main_state != MAIN_STATE_MANUAL && - status.main_state != MAIN_STATE_ACRO && - status.main_state != MAIN_STATE_ALTCTL && - status.main_state != MAIN_STATE_POSCTL && - ((status.data_link_lost && status.gps_failure) || - (status.data_link_lost_cmd && status.gps_failure_cmd))) { + status.main_state != MAIN_STATE_ACRO && + status.main_state != MAIN_STATE_ALTCTL && + status.main_state != MAIN_STATE_POSCTL && + ((status.data_link_lost && status.gps_failure) || + (status.data_link_lost_cmd && status.gps_failure_cmd))) { armed.force_failsafe = true; status_changed = true; static bool flight_termination_printed = false; + if (!flight_termination_printed) { warnx("Flight termination because of data link loss && gps failure"); mavlink_log_critical(mavlink_fd, "DL and GPS lost: flight termination"); flight_termination_printed = true; } - if (counter % (1000000 / COMMANDER_MONITORING_INTERVAL) == 0 ) { + + if (counter % (1000000 / COMMANDER_MONITORING_INTERVAL) == 0) { mavlink_log_critical(mavlink_fd, "DL and GPS lost: flight termination"); } } @@ -1714,19 +1774,21 @@ int commander_thread_main(int argc, char *argv[]) * If we are in manual (controlled with RC): * if both failed we want to terminate the flight */ if ((status.main_state == MAIN_STATE_ACRO || - status.main_state == MAIN_STATE_MANUAL || - status.main_state == MAIN_STATE_ALTCTL || - status.main_state == MAIN_STATE_POSCTL) && - ((status.rc_signal_lost && status.gps_failure) || - (status.rc_signal_lost_cmd && status.gps_failure_cmd))) { + status.main_state == MAIN_STATE_MANUAL || + status.main_state == MAIN_STATE_ALTCTL || + status.main_state == MAIN_STATE_POSCTL) && + ((status.rc_signal_lost && status.gps_failure) || + (status.rc_signal_lost_cmd && status.gps_failure_cmd))) { armed.force_failsafe = true; status_changed = true; static bool flight_termination_printed = false; + if (!flight_termination_printed) { warnx("Flight termination because of RC signal loss && gps failure"); flight_termination_printed = true; } - if (counter % (1000000 / COMMANDER_MONITORING_INTERVAL) == 0 ) { + + if (counter % (1000000 / COMMANDER_MONITORING_INTERVAL) == 0) { mavlink_log_critical(mavlink_fd, "RC and GPS lost: flight termination"); } } @@ -1767,6 +1829,7 @@ int commander_thread_main(int argc, char *argv[]) /* mark home position as set */ status.condition_home_position_valid = true; } + arming_state_changed = false; } @@ -1787,7 +1850,11 @@ int commander_thread_main(int argc, char *argv[]) if (status.failsafe != failsafe_old) { status_changed = true; - mavlink_log_info(mavlink_fd, "[cmd] failsafe state: %i", status.failsafe); + if (status.failsafe) { + mavlink_log_critical(mavlink_fd, "failsafe mode on"); + } else { + mavlink_log_critical(mavlink_fd, "failsafe mode off"); + } failsafe_old = status.failsafe; } @@ -1811,7 +1878,8 @@ int commander_thread_main(int argc, char *argv[]) } /* play arming and battery warning tunes */ - if (!arm_tune_played && armed.armed && (!safety.safety_switch_available || (safety.safety_switch_available && safety.safety_off))) { + if (!arm_tune_played && armed.armed && (!safety.safety_switch_available || (safety.safety_switch_available + && safety.safety_off))) { /* play tune when armed */ set_tune(TONE_ARMING_WARNING_TUNE); arm_tune_played = true; @@ -1989,6 +2057,7 @@ set_main_state_rc(struct vehicle_status_s *status_local, struct manual_control_s /* offboard switch overrides main switch */ if (sp_man->offboard_switch == SWITCH_POS_ON) { res = main_state_transition(status_local, MAIN_STATE_OFFBOARD); + if (res == TRANSITION_DENIED) { print_reject_mode(status_local, "OFFBOARD"); @@ -2010,6 +2079,7 @@ set_main_state_rc(struct vehicle_status_s *status_local, struct manual_control_s } else { res = main_state_transition(status_local, MAIN_STATE_MANUAL); } + // TRANSITION_DENIED is not possible here break; @@ -2024,7 +2094,7 @@ set_main_state_rc(struct vehicle_status_s *status_local, struct manual_control_s print_reject_mode(status_local, "POSCTL"); } - // fallback to ALTCTL + // fallback to ALTCTL res = main_state_transition(status_local, MAIN_STATE_ALTCTL); if (res != TRANSITION_DENIED) { @@ -2048,14 +2118,14 @@ set_main_state_rc(struct vehicle_status_s *status_local, struct manual_control_s break; // changed successfully or already in this state } - print_reject_mode(status_local, "AUTO_RTL"); + print_reject_mode(status_local, "AUTO_RTL"); - // fallback to LOITER if home position not set - res = main_state_transition(status_local, MAIN_STATE_AUTO_LOITER); + // fallback to LOITER if home position not set + res = main_state_transition(status_local, MAIN_STATE_AUTO_LOITER); - if (res != TRANSITION_DENIED) { - break; // changed successfully or already in this state - } + if (res != TRANSITION_DENIED) { + break; // changed successfully or already in this state + } } else if (sp_man->loiter_switch == SWITCH_POS_ON) { res = main_state_transition(status_local, MAIN_STATE_AUTO_LOITER); @@ -2064,7 +2134,7 @@ set_main_state_rc(struct vehicle_status_s *status_local, struct manual_control_s break; // changed successfully or already in this state } - print_reject_mode(status_local, "AUTO_LOITER"); + print_reject_mode(status_local, "AUTO_LOITER"); } else { res = main_state_transition(status_local, MAIN_STATE_AUTO_MISSION); @@ -2073,22 +2143,22 @@ set_main_state_rc(struct vehicle_status_s *status_local, struct manual_control_s break; // changed successfully or already in this state } - print_reject_mode(status_local, "AUTO_MISSION"); + print_reject_mode(status_local, "AUTO_MISSION"); - // fallback to LOITER if home position not set - res = main_state_transition(status_local, MAIN_STATE_AUTO_LOITER); + // fallback to LOITER if home position not set + res = main_state_transition(status_local, MAIN_STATE_AUTO_LOITER); - if (res != TRANSITION_DENIED) { - break; // changed successfully or already in this state - } + if (res != TRANSITION_DENIED) { + break; // changed successfully or already in this state + } } - // fallback to POSCTL - res = main_state_transition(status_local, MAIN_STATE_POSCTL); + // fallback to POSCTL + res = main_state_transition(status_local, MAIN_STATE_POSCTL); - if (res != TRANSITION_DENIED) { - break; // changed successfully or already in this state - } + if (res != TRANSITION_DENIED) { + break; // changed successfully or already in this state + } // fallback to ALTCTL res = main_state_transition(status_local, MAIN_STATE_ALTCTL); @@ -2132,18 +2202,6 @@ set_control_mode() control_mode.flag_control_termination_enabled = false; break; - case NAVIGATION_STATE_ACRO: - control_mode.flag_control_manual_enabled = true; - control_mode.flag_control_auto_enabled = false; - control_mode.flag_control_rates_enabled = true; - control_mode.flag_control_attitude_enabled = false; - control_mode.flag_control_altitude_enabled = false; - control_mode.flag_control_climb_rate_enabled = false; - control_mode.flag_control_position_enabled = false; - control_mode.flag_control_velocity_enabled = false; - control_mode.flag_control_termination_enabled = false; - break; - case NAVIGATION_STATE_ALTCTL: control_mode.flag_control_manual_enabled = true; control_mode.flag_control_auto_enabled = false; @@ -2156,59 +2214,6 @@ set_control_mode() control_mode.flag_control_termination_enabled = false; break; - case NAVIGATION_STATE_OFFBOARD: - control_mode.flag_control_manual_enabled = false; - control_mode.flag_control_auto_enabled = false; - control_mode.flag_control_offboard_enabled = true; - - switch (sp_offboard.mode) { - case OFFBOARD_CONTROL_MODE_DIRECT_RATES: - control_mode.flag_control_rates_enabled = true; - control_mode.flag_control_attitude_enabled = false; - control_mode.flag_control_altitude_enabled = false; - control_mode.flag_control_climb_rate_enabled = false; - control_mode.flag_control_position_enabled = false; - control_mode.flag_control_velocity_enabled = false; - break; - case OFFBOARD_CONTROL_MODE_DIRECT_ATTITUDE: - control_mode.flag_control_rates_enabled = true; - control_mode.flag_control_attitude_enabled = true; - control_mode.flag_control_altitude_enabled = false; - control_mode.flag_control_climb_rate_enabled = false; - control_mode.flag_control_position_enabled = false; - control_mode.flag_control_velocity_enabled = false; - break; - case OFFBOARD_CONTROL_MODE_DIRECT_FORCE: - control_mode.flag_control_rates_enabled = true; - control_mode.flag_control_attitude_enabled = false; - control_mode.flag_control_force_enabled = true; - control_mode.flag_control_altitude_enabled = false; - control_mode.flag_control_climb_rate_enabled = false; - control_mode.flag_control_position_enabled = false; - control_mode.flag_control_velocity_enabled = false; - break; - case OFFBOARD_CONTROL_MODE_DIRECT_LOCAL_NED: - case OFFBOARD_CONTROL_MODE_DIRECT_LOCAL_OFFSET_NED: - case OFFBOARD_CONTROL_MODE_DIRECT_BODY_NED: - case OFFBOARD_CONTROL_MODE_DIRECT_BODY_OFFSET_NED: - control_mode.flag_control_rates_enabled = true; - control_mode.flag_control_attitude_enabled = true; - control_mode.flag_control_altitude_enabled = true; - control_mode.flag_control_climb_rate_enabled = true; - control_mode.flag_control_position_enabled = true; - control_mode.flag_control_velocity_enabled = true; - //XXX: the flags could depend on sp_offboard.ignore - break; - default: - control_mode.flag_control_rates_enabled = false; - control_mode.flag_control_attitude_enabled = false; - control_mode.flag_control_altitude_enabled = false; - control_mode.flag_control_climb_rate_enabled = false; - control_mode.flag_control_position_enabled = false; - control_mode.flag_control_velocity_enabled = false; - } - break; - case NAVIGATION_STATE_POSCTL: control_mode.flag_control_manual_enabled = true; control_mode.flag_control_auto_enabled = false; @@ -2224,6 +2229,7 @@ set_control_mode() case NAVIGATION_STATE_AUTO_MISSION: case NAVIGATION_STATE_AUTO_LOITER: case NAVIGATION_STATE_AUTO_RTL: + case NAVIGATION_STATE_AUTO_RCRECOVER: case NAVIGATION_STATE_AUTO_RTGS: case NAVIGATION_STATE_AUTO_LANDENGFAIL: control_mode.flag_control_manual_enabled = false; @@ -2249,6 +2255,19 @@ set_control_mode() control_mode.flag_control_termination_enabled = false; break; + case NAVIGATION_STATE_ACRO: + control_mode.flag_control_manual_enabled = true; + control_mode.flag_control_auto_enabled = false; + control_mode.flag_control_rates_enabled = true; + control_mode.flag_control_attitude_enabled = false; + control_mode.flag_control_altitude_enabled = false; + control_mode.flag_control_climb_rate_enabled = false; + control_mode.flag_control_position_enabled = false; + control_mode.flag_control_velocity_enabled = false; + control_mode.flag_control_termination_enabled = false; + break; + + case NAVIGATION_STATE_LAND: control_mode.flag_control_manual_enabled = false; control_mode.flag_control_auto_enabled = true; @@ -2262,6 +2281,19 @@ set_control_mode() control_mode.flag_control_termination_enabled = false; break; + case NAVIGATION_STATE_DESCEND: + /* TODO: check if this makes sense */ + control_mode.flag_control_manual_enabled = false; + control_mode.flag_control_auto_enabled = true; + control_mode.flag_control_rates_enabled = true; + control_mode.flag_control_attitude_enabled = true; + control_mode.flag_control_position_enabled = false; + control_mode.flag_control_velocity_enabled = false; + control_mode.flag_control_altitude_enabled = false; + control_mode.flag_control_climb_rate_enabled = true; + control_mode.flag_control_termination_enabled = false; + break; + case NAVIGATION_STATE_TERMINATION: /* disable all controllers on termination */ control_mode.flag_control_manual_enabled = false; @@ -2275,6 +2307,63 @@ set_control_mode() control_mode.flag_control_termination_enabled = true; break; + case NAVIGATION_STATE_OFFBOARD: + control_mode.flag_control_manual_enabled = false; + control_mode.flag_control_auto_enabled = false; + control_mode.flag_control_offboard_enabled = true; + + switch (sp_offboard.mode) { + case OFFBOARD_CONTROL_MODE_DIRECT_RATES: + control_mode.flag_control_rates_enabled = true; + control_mode.flag_control_attitude_enabled = false; + control_mode.flag_control_altitude_enabled = false; + control_mode.flag_control_climb_rate_enabled = false; + control_mode.flag_control_position_enabled = false; + control_mode.flag_control_velocity_enabled = false; + break; + + case OFFBOARD_CONTROL_MODE_DIRECT_ATTITUDE: + control_mode.flag_control_rates_enabled = true; + control_mode.flag_control_attitude_enabled = true; + control_mode.flag_control_altitude_enabled = false; + control_mode.flag_control_climb_rate_enabled = false; + control_mode.flag_control_position_enabled = false; + control_mode.flag_control_velocity_enabled = false; + break; + + case OFFBOARD_CONTROL_MODE_DIRECT_FORCE: + control_mode.flag_control_rates_enabled = true; + control_mode.flag_control_attitude_enabled = false; + control_mode.flag_control_force_enabled = true; + control_mode.flag_control_altitude_enabled = false; + control_mode.flag_control_climb_rate_enabled = false; + control_mode.flag_control_position_enabled = false; + control_mode.flag_control_velocity_enabled = false; + break; + + case OFFBOARD_CONTROL_MODE_DIRECT_LOCAL_NED: + case OFFBOARD_CONTROL_MODE_DIRECT_LOCAL_OFFSET_NED: + case OFFBOARD_CONTROL_MODE_DIRECT_BODY_NED: + case OFFBOARD_CONTROL_MODE_DIRECT_BODY_OFFSET_NED: + control_mode.flag_control_rates_enabled = true; + control_mode.flag_control_attitude_enabled = true; + control_mode.flag_control_altitude_enabled = true; + control_mode.flag_control_climb_rate_enabled = true; + control_mode.flag_control_position_enabled = true; + control_mode.flag_control_velocity_enabled = true; + //XXX: the flags could depend on sp_offboard.ignore + break; + + default: + control_mode.flag_control_rates_enabled = false; + control_mode.flag_control_attitude_enabled = false; + control_mode.flag_control_altitude_enabled = false; + control_mode.flag_control_climb_rate_enabled = false; + control_mode.flag_control_position_enabled = false; + control_mode.flag_control_velocity_enabled = false; + } + break; + default: break; } @@ -2416,7 +2505,8 @@ void *commander_low_prio_loop(void *arg) int calib_ret = ERROR; /* try to go to INIT/PREFLIGHT arming state */ - if (TRANSITION_DENIED == arming_state_transition(&status, &safety, ARMING_STATE_INIT, &armed, true /* fRunPreArmChecks */, mavlink_fd)) { + if (TRANSITION_DENIED == arming_state_transition(&status, &safety, ARMING_STATE_INIT, &armed, + true /* fRunPreArmChecks */, mavlink_fd)) { answer_command(cmd, VEHICLE_CMD_RESULT_DENIED); break; } diff --git a/src/modules/commander/gyro_calibration.cpp b/src/modules/commander/gyro_calibration.cpp index d89c67c2b..8ab14dd52 100644 --- a/src/modules/commander/gyro_calibration.cpp +++ b/src/modules/commander/gyro_calibration.cpp @@ -63,7 +63,10 @@ static const char *sensor_name = "gyro"; int do_gyro_calibration(int mavlink_fd) { mavlink_log_info(mavlink_fd, CAL_STARTED_MSG, sensor_name); - mavlink_log_info(mavlink_fd, "don't move system"); + mavlink_log_info(mavlink_fd, "HOLD STILL"); + + /* wait for the user to respond */ + sleep(2); struct gyro_scale gyro_scale = { 0.0f, diff --git a/src/modules/commander/mag_calibration.cpp b/src/modules/commander/mag_calibration.cpp index 23900f386..7be8de9c6 100644 --- a/src/modules/commander/mag_calibration.cpp +++ b/src/modules/commander/mag_calibration.cpp @@ -155,7 +155,7 @@ int do_mag_calibration(int mavlink_fd) uint64_t calibration_deadline = hrt_absolute_time() + calibration_interval; unsigned poll_errcount = 0; - mavlink_log_info(mavlink_fd, "rotate in a figure 8 around all axis"); + mavlink_log_info(mavlink_fd, "Turn on all sides: front/back,left/right,up/down"); calibration_counter = 0; diff --git a/src/modules/commander/state_machine_helper.cpp b/src/modules/commander/state_machine_helper.cpp index 9568752ae..e37019d02 100644 --- a/src/modules/commander/state_machine_helper.cpp +++ b/src/modules/commander/state_machine_helper.cpp @@ -444,7 +444,7 @@ transition_result_t hil_state_transition(hil_state_t new_state, int status_pub, * Check failsafe and main status and set navigation status for navigator accordingly */ bool set_nav_state(struct vehicle_status_s *status, const bool data_link_loss_enabled, const bool mission_finished, - const bool stay_in_failsafe) + const bool stay_in_failsafe) { navigation_state_t nav_state_old = status->nav_state; @@ -497,11 +497,13 @@ bool set_nav_state(struct vehicle_status_s *status, const bool data_link_loss_en break; case MAIN_STATE_AUTO_MISSION: + /* go into failsafe * - if commanded to do so * - if we have an engine failure - * - if either the datalink is enabled and lost as well as RC is lost - * - if there is no datalink and the mission is finished */ + * - depending on datalink, RC and if the mission is finished */ + + /* first look at the commands */ if (status->engine_failure_cmd) { status->nav_state = NAVIGATION_STATE_AUTO_LANDENGFAIL; } else if (status->data_link_lost_cmd) { @@ -509,14 +511,17 @@ bool set_nav_state(struct vehicle_status_s *status, const bool data_link_loss_en } else if (status->gps_failure_cmd) { status->nav_state = NAVIGATION_STATE_AUTO_LANDGPSFAIL; } else if (status->rc_signal_lost_cmd) { - status->nav_state = NAVIGATION_STATE_AUTO_RTGS; //XXX - /* Finished handling commands which have priority , now handle failures */ + status->nav_state = NAVIGATION_STATE_AUTO_RCRECOVER; + + /* finished handling commands which have priority, now handle failures */ } else if (status->gps_failure) { status->nav_state = NAVIGATION_STATE_AUTO_LANDGPSFAIL; } else if (status->engine_failure) { status->nav_state = NAVIGATION_STATE_AUTO_LANDENGFAIL; - } else if (((status->data_link_lost && data_link_loss_enabled) && status->rc_signal_lost) || - (!data_link_loss_enabled && status->rc_signal_lost && mission_finished)) { + + /* datalink loss enabled: + * check for datalink lost: this should always trigger RTGS */ + } else if (data_link_loss_enabled && status->data_link_lost) { status->failsafe = true; if (status->condition_global_position_valid && status->condition_home_position_valid) { @@ -529,12 +534,15 @@ bool set_nav_state(struct vehicle_status_s *status, const bool data_link_loss_en status->nav_state = NAVIGATION_STATE_TERMINATION; } - /* also go into failsafe if just datalink is lost */ - } else if (status->data_link_lost && data_link_loss_enabled) { + /* datalink loss disabled: + * check if both, RC and datalink are lost during the mission + * or RC is lost after the mission is finished: this should always trigger RCRECOVER */ + } else if (!data_link_loss_enabled && ((status->rc_signal_lost && status->data_link_lost) || + (status->rc_signal_lost && mission_finished))) { status->failsafe = true; if (status->condition_global_position_valid && status->condition_home_position_valid) { - status->nav_state = NAVIGATION_STATE_AUTO_RTGS; + status->nav_state = NAVIGATION_STATE_AUTO_RCRECOVER; } else if (status->condition_local_position_valid) { status->nav_state = NAVIGATION_STATE_LAND; } else if (status->condition_local_altitude_valid) { @@ -543,13 +551,8 @@ bool set_nav_state(struct vehicle_status_s *status, const bool data_link_loss_en status->nav_state = NAVIGATION_STATE_TERMINATION; } - /* don't bother if RC is lost and mission is not yet finished */ - } else if (status->rc_signal_lost && !stay_in_failsafe) { - - /* this mode is ok, we don't need RC for missions */ - status->nav_state = NAVIGATION_STATE_AUTO_MISSION; + /* stay where you are if you should stay in failsafe, otherwise everything is perfect */ } else if (!stay_in_failsafe){ - /* everything is perfect */ status->nav_state = NAVIGATION_STATE_AUTO_MISSION; } break; diff --git a/src/modules/controllib/module.mk b/src/modules/controllib/module.mk index f0139a4b7..2860d1efc 100644 --- a/src/modules/controllib/module.mk +++ b/src/modules/controllib/module.mk @@ -39,3 +39,5 @@ SRCS = test_params.c \ block/BlockParam.cpp \ uorb/blocks.cpp \ blocks.cpp + +MAXOPTIMIZATION = -Os diff --git a/src/modules/ekf_att_pos_estimator/ekf_att_pos_estimator_main.cpp b/src/modules/ekf_att_pos_estimator/ekf_att_pos_estimator_main.cpp index 685f5e12f..e7805daa9 100644 --- a/src/modules/ekf_att_pos_estimator/ekf_att_pos_estimator_main.cpp +++ b/src/modules/ekf_att_pos_estimator/ekf_att_pos_estimator_main.cpp @@ -613,8 +613,11 @@ FixedwingEstimator::check_filter_state() warn_index = max_warn_index; } - warnx("reset: %s", feedback[warn_index]); - mavlink_log_critical(_mavlink_fd, "[ekf check] %s", feedback[warn_index]); + // Do not warn about accel offset if we have no position updates + if (!(warn_index == 5 && _ekf->staticMode)) { + warnx("reset: %s", feedback[warn_index]); + mavlink_log_critical(_mavlink_fd, "[ekf check] %s", feedback[warn_index]); + } } struct estimator_status_report rep; @@ -1557,7 +1560,7 @@ FixedwingEstimator::start() _estimator_task = task_spawn_cmd("ekf_att_pos_estimator", SCHED_DEFAULT, SCHED_PRIORITY_MAX - 40, - 5000, + 7500, (main_t)&FixedwingEstimator::task_main_trampoline, nullptr); diff --git a/src/modules/mavlink/mavlink.c b/src/modules/mavlink/mavlink.c index bec706bad..9afe74af1 100644 --- a/src/modules/mavlink/mavlink.c +++ b/src/modules/mavlink/mavlink.c @@ -78,11 +78,7 @@ PARAM_DEFINE_INT32(MAV_FWDEXTSP, 1); mavlink_system_t mavlink_system = { 100, - 50, - MAV_TYPE_FIXED_WING, - 0, - 0, - 0 + 50 }; // System ID, 1-255, Component/Subsystem ID, 1-255 /* diff --git a/src/modules/mavlink/mavlink_main.cpp b/src/modules/mavlink/mavlink_main.cpp index 0d932d20a..fb9f65cf5 100644 --- a/src/modules/mavlink/mavlink_main.cpp +++ b/src/modules/mavlink/mavlink_main.cpp @@ -167,8 +167,10 @@ Mavlink::Mavlink() : _param_initialized(false), _param_system_id(0), _param_component_id(0), - _param_system_type(0), + _param_system_type(MAV_TYPE_FIXED_WING), _param_use_hil_gps(0), + _param_forward_externalsp(0), + _system_type(0), /* performance counters */ _loop_perf(perf_alloc(PC_ELAPSED, "mavlink_el")), @@ -524,7 +526,7 @@ void Mavlink::mavlink_update_system(void) param_get(_param_system_type, &system_type); if (system_type >= 0 && system_type < MAV_TYPE_ENUM_END) { - mavlink_system.type = system_type; + _system_type = system_type; } int32_t use_hil_gps; @@ -755,7 +757,7 @@ Mavlink::send_message(const uint8_t msgid, const void *msg) pthread_mutex_lock(&_send_mutex); - int buf_free = get_free_tx_buf(); + unsigned buf_free = get_free_tx_buf(); uint8_t payload_len = mavlink_message_lengths[msgid]; unsigned packet_len = payload_len + MAVLINK_NUM_NON_PAYLOAD_BYTES; @@ -763,7 +765,7 @@ Mavlink::send_message(const uint8_t msgid, const void *msg) _last_write_try_time = hrt_absolute_time(); /* check if there is space in the buffer, let it overflow else */ - if (buf_free < TX_BUFFER_GAP) { + if ((buf_free < TX_BUFFER_GAP) || (buf_free < packet_len)) { /* no enough space in buffer to send */ count_txerr(); count_txerrbytes(packet_len); @@ -820,14 +822,14 @@ Mavlink::resend_message(mavlink_message_t *msg) pthread_mutex_lock(&_send_mutex); - int buf_free = get_free_tx_buf(); + unsigned buf_free = get_free_tx_buf(); _last_write_try_time = hrt_absolute_time(); unsigned packet_len = msg->len + MAVLINK_NUM_NON_PAYLOAD_BYTES; /* check if there is space in the buffer, let it overflow else */ - if (buf_free < TX_BUFFER_GAP) { + if ((buf_free < TX_BUFFER_GAP) || (buf_free < packet_len)) { /* no enough space in buffer to send */ count_txerr(); count_txerrbytes(packet_len); @@ -1634,7 +1636,7 @@ Mavlink::start(int argc, char *argv[]) task_spawn_cmd(buf, SCHED_DEFAULT, SCHED_PRIORITY_DEFAULT, - 2700, + 2800, (main_t)&Mavlink::start_helper, (const char **)argv); diff --git a/src/modules/mavlink/mavlink_main.h b/src/modules/mavlink/mavlink_main.h index 1f96e586b..ad5e5001b 100644 --- a/src/modules/mavlink/mavlink_main.h +++ b/src/modules/mavlink/mavlink_main.h @@ -265,6 +265,8 @@ public: struct mavlink_logbuffer *get_logbuffer() { return &_logbuffer; } + unsigned get_system_type() { return _system_type; } + protected: Mavlink *next; @@ -354,6 +356,8 @@ private: param_t _param_use_hil_gps; param_t _param_forward_externalsp; + unsigned _system_type; + perf_counter_t _loop_perf; /**< loop performance counter */ perf_counter_t _txerr_perf; /**< TX error counter */ diff --git a/src/modules/mavlink/mavlink_messages.cpp b/src/modules/mavlink/mavlink_messages.cpp index cccb698bf..978aee118 100644 --- a/src/modules/mavlink/mavlink_messages.cpp +++ b/src/modules/mavlink/mavlink_messages.cpp @@ -302,7 +302,7 @@ protected: msg.base_mode = 0; msg.custom_mode = 0; get_mavlink_mode_state(&status, &pos_sp_triplet, &msg.system_status, &msg.base_mode, &msg.custom_mode); - msg.type = mavlink_system.type; + msg.type = _mavlink->get_system_type(); msg.autopilot = MAV_AUTOPILOT_PX4; msg.mavlink_version = 3; @@ -382,11 +382,11 @@ protected: clock_gettime(CLOCK_REALTIME, &ts); /* use GPS time for log file naming, e.g. /fs/microsd/2014-01-19/19_37_52.bin */ time_t gps_time_sec = ts.tv_sec + (ts.tv_nsec / 1e9); - struct tm t; - gmtime_r(&gps_time_sec, &t); + struct tm tt; + gmtime_r(&gps_time_sec, &tt); // XXX we do not want to interfere here with the SD log app - strftime(log_file_name, sizeof(log_file_name), "msgs_%Y_%m_%d_%H_%M_%S.txt", &t); + strftime(log_file_name, sizeof(log_file_name), "msgs_%Y_%m_%d_%H_%M_%S.txt", &tt); snprintf(log_file_path, sizeof(log_file_path), "/fs/microsd/%s", log_file_name); fp = fopen(log_file_path, "ab"); } @@ -1353,15 +1353,17 @@ protected: const float pwm_center = (PWM_HIGHEST_MAX + PWM_LOWEST_MIN) / 2; + unsigned system_type = _mavlink->get_system_type(); + /* scale outputs depending on system type */ - if (mavlink_system.type == MAV_TYPE_QUADROTOR || - mavlink_system.type == MAV_TYPE_HEXAROTOR || - mavlink_system.type == MAV_TYPE_OCTOROTOR) { + if (system_type == MAV_TYPE_QUADROTOR || + system_type == MAV_TYPE_HEXAROTOR || + system_type == MAV_TYPE_OCTOROTOR) { /* multirotors: set number of rotor outputs depending on type */ unsigned n; - switch (mavlink_system.type) { + switch (system_type) { case MAV_TYPE_QUADROTOR: n = 4; break; @@ -1717,7 +1719,53 @@ protected: msg.chan16_raw = (rc.channel_count > 15) ? rc.values[15] : UINT16_MAX; msg.chan17_raw = (rc.channel_count > 16) ? rc.values[16] : UINT16_MAX; msg.chan18_raw = (rc.channel_count > 17) ? rc.values[17] : UINT16_MAX; - msg.rssi = rc.rssi; + + /* RSSI has a max value of 100, and when Spektrum or S.BUS are + * available, the RSSI field is invalid, as they do not provide + * an RSSI measurement. Use an out of band magic value to signal + * these digital ports. XXX revise MAVLink spec to address this. + * One option would be to use the top bit to toggle between RSSI + * and input source mode. + * + * Full RSSI field: 0b 1 111 1111 + * + * ^ If bit is set, RSSI encodes type + RSSI + * + * ^ These three bits encode a total of 8 + * digital RC input types. + * 0: PPM, 1: SBUS, 2: Spektrum, 2: ST24 + * ^ These four bits encode a total of + * 16 RSSI levels. 15 = full, 0 = no signal + * + */ + + /* Initialize RSSI with the special mode level flag */ + msg.rssi = (1 << 7); + + /* Set RSSI */ + msg.rssi |= (rc.rssi <= 100) ? ((rc.rssi / 7) + 1) : 15; + + switch (rc.input_source) { + case RC_INPUT_SOURCE_PX4FMU_PPM: + /* fallthrough */ + case RC_INPUT_SOURCE_PX4IO_PPM: + msg.rssi |= (0 << 4); + break; + case RC_INPUT_SOURCE_PX4IO_SPEKTRUM: + msg.rssi |= (1 << 4); + break; + case RC_INPUT_SOURCE_PX4IO_SBUS: + msg.rssi |= (2 << 4); + break; + case RC_INPUT_SOURCE_PX4IO_ST24: + msg.rssi |= (3 << 4); + break; + } + + if (rc.rc_lost) { + /* RSSI is by definition zero */ + msg.rssi = 0; + } _mavlink->send_message(MAVLINK_MSG_ID_RC_CHANNELS, &msg); } diff --git a/src/modules/mavlink/mavlink_receiver.cpp b/src/modules/mavlink/mavlink_receiver.cpp index e8d783847..bc092c7e9 100644 --- a/src/modules/mavlink/mavlink_receiver.cpp +++ b/src/modules/mavlink/mavlink_receiver.cpp @@ -391,11 +391,9 @@ MavlinkReceiver::handle_message_hil_optical_flow(mavlink_message_t *msg) f.timestamp = hrt_absolute_time(); f.flow_timestamp = flow.time_usec; - f.flow_raw_x = flow.flow_x; - f.flow_raw_y = flow.flow_y; - f.flow_comp_x_m = flow.flow_comp_m_x; - f.flow_comp_y_m = flow.flow_comp_m_y; - f.ground_distance_m = flow.ground_distance; + f.flow_raw_x = flow.integrated_x; + f.flow_raw_y = flow.integrated_y; + f.ground_distance_m = flow.distance; f.quality = flow.quality; f.sensor_id = flow.sensor_id; @@ -413,7 +411,7 @@ MavlinkReceiver::handle_message_hil_optical_flow(mavlink_message_t *msg) r.timestamp = hrt_absolute_time(); r.error_count = 0; r.type = RANGE_FINDER_TYPE_LASER; - r.distance = flow.ground_distance; + r.distance = flow.distance; r.minimum_distance = 0.0f; r.maximum_distance = 40.0f; // this is set to match the typical range of real sensors, could be made configurable r.valid = (r.distance > r.minimum_distance) && (r.distance < r.maximum_distance); @@ -1398,7 +1396,7 @@ MavlinkReceiver::receive_start(Mavlink *parent) struct sched_param param; (void)pthread_attr_getschedparam(&receiveloop_attr, ¶m); - param.sched_priority = SCHED_PRIORITY_MAX - 40; + param.sched_priority = SCHED_PRIORITY_MAX - 80; (void)pthread_attr_setschedparam(&receiveloop_attr, ¶m); pthread_attr_setstacksize(&receiveloop_attr, 2900); diff --git a/src/modules/navigator/datalinkloss.cpp b/src/modules/navigator/datalinkloss.cpp index 66f1c8c73..e789fd10d 100644 --- a/src/modules/navigator/datalinkloss.cpp +++ b/src/modules/navigator/datalinkloss.cpp @@ -156,6 +156,7 @@ DataLinkLoss::set_dll_item() /* Request flight termination from the commander */ _navigator->get_mission_result()->flight_termination = true; _navigator->publish_mission_result(); + reset_mission_item_reached(); warnx("not switched to manual: request flight termination"); pos_sp_triplet->previous.valid = false; pos_sp_triplet->current.valid = false; @@ -188,6 +189,7 @@ DataLinkLoss::advance_dll() mavlink_log_info(_navigator->get_mavlink_fd(), "#audio: too many DL losses, fly to airfield home"); _navigator->get_mission_result()->stay_in_failsafe = true; _navigator->publish_mission_result(); + reset_mission_item_reached(); _dll_state = DLL_STATE_FLYTOAIRFIELDHOMEWP; } else { if (!_param_skipcommshold.get()) { @@ -208,6 +210,7 @@ DataLinkLoss::advance_dll() _dll_state = DLL_STATE_FLYTOAIRFIELDHOMEWP; _navigator->get_mission_result()->stay_in_failsafe = true; _navigator->publish_mission_result(); + reset_mission_item_reached(); break; case DLL_STATE_FLYTOAIRFIELDHOMEWP: _dll_state = DLL_STATE_TERMINATE; @@ -215,6 +218,7 @@ DataLinkLoss::advance_dll() mavlink_log_info(_navigator->get_mavlink_fd(), "#audio: no manual control, terminating"); _navigator->get_mission_result()->stay_in_failsafe = true; _navigator->publish_mission_result(); + reset_mission_item_reached(); break; case DLL_STATE_TERMINATE: warnx("dll end"); diff --git a/src/modules/navigator/mission.cpp b/src/modules/navigator/mission.cpp index 7fac69a61..0765e9b7c 100644 --- a/src/modules/navigator/mission.cpp +++ b/src/modules/navigator/mission.cpp @@ -371,7 +371,7 @@ Mission::set_mission_items() } else { /* no mission available or mission finished, switch to loiter */ if (_mission_type != MISSION_TYPE_NONE) { - mavlink_log_critical(_navigator->get_mavlink_fd(), "mission finished, loitering"); + mavlink_log_critical(_navigator->get_mavlink_fd(), "mission finished"); /* use last setpoint for loiter */ _navigator->set_can_loiter_at_sp(true); @@ -595,13 +595,15 @@ Mission::read_mission_item(bool onboard, bool is_current, struct mission_item_s dm_item = DM_KEY_WAYPOINTS_OFFBOARD(_offboard_mission.dataman_id); } - if (*mission_index_ptr < 0 || *mission_index_ptr >= (int)mission->count) { - /* mission item index out of bounds */ - return false; - } - - /* repeat several to get the mission item because we might have to follow multiple DO_JUMPS */ + /* Repeat this several times in case there are several DO JUMPS that we need to follow along, however, after + * 10 iterations we have to assume that the DO JUMPS are probably cycling and give up. */ for (int i = 0; i < 10; i++) { + + if (*mission_index_ptr < 0 || *mission_index_ptr >= (int)mission->count) { + /* mission item index out of bounds */ + return false; + } + const ssize_t len = sizeof(struct mission_item_s); /* read mission item to temp storage first to not overwrite current mission item if data damaged */ @@ -626,11 +628,12 @@ Mission::read_mission_item(bool onboard, bool is_current, struct mission_item_s if (is_current) { (mission_item_tmp.do_jump_current_count)++; /* save repeat count */ - if (dm_write(dm_item, *mission_index_ptr, DM_PERSIST_IN_FLIGHT_RESET, &mission_item_tmp, len) != len) { + if (dm_write(dm_item, *mission_index_ptr, DM_PERSIST_POWER_ON_RESET, + &mission_item_tmp, len) != len) { /* not supposed to happen unless the datamanager can't access the * dataman */ mavlink_log_critical(_navigator->get_mavlink_fd(), - "ERROR DO JUMP waypoint could not be written"); + "ERROR DO JUMP waypoint could not be written"); return false; } } @@ -639,8 +642,10 @@ Mission::read_mission_item(bool onboard, bool is_current, struct mission_item_s *mission_index_ptr = mission_item_tmp.do_jump_mission_index; } else { - mavlink_log_critical(_navigator->get_mavlink_fd(), - "DO JUMP repetitions completed"); + if (is_current) { + mavlink_log_critical(_navigator->get_mavlink_fd(), + "DO JUMP repetitions completed"); + } /* no more DO_JUMPS, therefore just try to continue with next mission item */ (*mission_index_ptr)++; } @@ -707,6 +712,7 @@ Mission::set_mission_item_reached() _navigator->get_mission_result()->reached = true; _navigator->get_mission_result()->seq_reached = _current_offboard_mission_index; _navigator->publish_mission_result(); + reset_mission_item_reached(); } void diff --git a/src/modules/navigator/navigator_main.cpp b/src/modules/navigator/navigator_main.cpp index a867dd0da..10a4ee88f 100644 --- a/src/modules/navigator/navigator_main.cpp +++ b/src/modules/navigator/navigator_main.cpp @@ -289,8 +289,9 @@ Navigator::task_main() navigation_capabilities_update(); params_update(); - /* rate limit position updates to 50 Hz */ + /* rate limit position and sensor updates to 50 Hz */ orb_set_interval(_global_pos_sub, 20); + orb_set_interval(_sensor_combined_sub, 20); hrt_abstime mavlink_open_time = 0; const hrt_abstime mavlink_open_interval = 500000; @@ -497,8 +498,8 @@ Navigator::start() /* start the task */ _navigator_task = task_spawn_cmd("navigator", SCHED_DEFAULT, - SCHED_PRIORITY_MAX - 5, - 2000, + SCHED_PRIORITY_DEFAULT + 20, + 1800, (main_t)&Navigator::task_main_trampoline, nullptr); @@ -630,9 +631,6 @@ Navigator::publish_mission_result() /* advertise and publish */ _mission_result_pub = orb_advertise(ORB_ID(mission_result), &_mission_result); } - /* reset reached bool */ - _mission_result.reached = false; - _mission_result.finished = false; } void diff --git a/src/modules/navigator/rcloss.cpp b/src/modules/navigator/rcloss.cpp index 5564a1c42..42392e739 100644 --- a/src/modules/navigator/rcloss.cpp +++ b/src/modules/navigator/rcloss.cpp @@ -163,6 +163,7 @@ RCLoss::advance_rcl() _rcl_state = RCL_STATE_TERMINATE; _navigator->get_mission_result()->stay_in_failsafe = true; _navigator->publish_mission_result(); + reset_mission_item_reached(); } break; case RCL_STATE_LOITER: @@ -171,6 +172,7 @@ RCLoss::advance_rcl() mavlink_log_info(_navigator->get_mavlink_fd(), "#audio: RC not regained, terminating"); _navigator->get_mission_result()->stay_in_failsafe = true; _navigator->publish_mission_result(); + reset_mission_item_reached(); break; case RCL_STATE_TERMINATE: warnx("rcl end"); diff --git a/src/modules/px4iofirmware/controls.c b/src/modules/px4iofirmware/controls.c index 7b127759a..58c9429b6 100644 --- a/src/modules/px4iofirmware/controls.c +++ b/src/modules/px4iofirmware/controls.c @@ -41,6 +41,7 @@ #include <stdbool.h> #include <drivers/drv_hrt.h> +#include <drivers/drv_rc_input.h> #include <systemlib/perf_counter.h> #include <systemlib/ppm_decode.h> #include <rc/st24.h> @@ -60,6 +61,8 @@ static perf_counter_t c_gather_ppm; static int _dsm_fd; +static uint16_t rc_value_override = 0; + bool dsm_port_input(uint16_t *rssi, bool *dsm_updated, bool *st24_updated) { perf_begin(c_gather_dsm); @@ -68,7 +71,6 @@ bool dsm_port_input(uint16_t *rssi, bool *dsm_updated, bool *st24_updated) uint8_t *bytes; *dsm_updated = dsm_input(r_raw_rc_values, &temp_count, &n_bytes, &bytes); if (*dsm_updated) { - r_raw_rc_flags |= PX4IO_P_STATUS_FLAGS_RC_DSM; r_raw_rc_count = temp_count & 0x7fff; if (temp_count & 0x8000) r_raw_rc_flags |= PX4IO_P_RAW_RC_FLAGS_RC_DSM11; @@ -89,6 +91,7 @@ bool dsm_port_input(uint16_t *rssi, bool *dsm_updated, bool *st24_updated) for (unsigned i = 0; i < n_bytes; i++) { /* set updated flag if one complete packet was parsed */ + st24_rssi = RC_INPUT_RSSI_MAX; *st24_updated |= (OK == st24_decode(bytes[i], &st24_rssi, &rx_count, &st24_channel_count, r_raw_rc_values, PX4IO_RC_INPUT_CHANNELS)); } @@ -168,6 +171,12 @@ controls_tick() { perf_begin(c_gather_dsm); bool dsm_updated, st24_updated; (void)dsm_port_input(&rssi, &dsm_updated, &st24_updated); + if (dsm_updated) { + r_status_flags |= PX4IO_P_STATUS_FLAGS_RC_DSM; + } + if (st24_updated) { + r_status_flags |= PX4IO_P_STATUS_FLAGS_RC_ST24; + } perf_end(c_gather_dsm); perf_begin(c_gather_sbus); @@ -316,6 +325,9 @@ controls_tick() { r_rc_values[mapped] = SIGNED_TO_REG(scaled); assigned_channels |= (1 << mapped); + } else if (mapped == PX4IO_P_RC_CONFIG_ASSIGNMENT_MODESWITCH) { + /* pick out override channel, indicated by special mapping */ + rc_value_override = SIGNED_TO_REG(scaled); } } } @@ -409,9 +421,18 @@ controls_tick() { * requested override. * */ - if ((r_status_flags & PX4IO_P_STATUS_FLAGS_RC_OK) && (REG_TO_SIGNED(r_rc_values[4]) < RC_CHANNEL_LOW_THRESH)) + if ((r_status_flags & PX4IO_P_STATUS_FLAGS_RC_OK) && (REG_TO_SIGNED(rc_value_override) < RC_CHANNEL_LOW_THRESH)) override = true; + /* + if the FMU is dead then enable override if we have a + mixer and OVERRIDE_IMMEDIATE is set + */ + if (!(r_status_flags & PX4IO_P_STATUS_FLAGS_FMU_OK) && + (r_setup_arming & PX4IO_P_SETUP_ARMING_OVERRIDE_IMMEDIATE) && + (r_status_flags & PX4IO_P_STATUS_FLAGS_MIXER_OK)) + override = true; + if (override) { r_status_flags |= PX4IO_P_STATUS_FLAGS_OVERRIDE; diff --git a/src/modules/px4iofirmware/mixer.cpp b/src/modules/px4iofirmware/mixer.cpp index 3e19333d8..c0b8ac358 100644 --- a/src/modules/px4iofirmware/mixer.cpp +++ b/src/modules/px4iofirmware/mixer.cpp @@ -60,13 +60,6 @@ extern "C" { */ #define FMU_INPUT_DROP_LIMIT_US 500000 -/* XXX need to move the RC_CHANNEL_FUNCTION out of rc_channels.h and into systemlib */ -#define ROLL 0 -#define PITCH 1 -#define YAW 2 -#define THROTTLE 3 -#define OVERRIDE 4 - /* current servo arm/disarm state */ static bool mixer_servos_armed = false; static bool should_arm = false; diff --git a/src/modules/px4iofirmware/protocol.h b/src/modules/px4iofirmware/protocol.h index 89a470b44..c7e9ae3eb 100644 --- a/src/modules/px4iofirmware/protocol.h +++ b/src/modules/px4iofirmware/protocol.h @@ -183,6 +183,7 @@ #define PX4IO_P_SETUP_ARMING_LOCKDOWN (1 << 7) /* If set, the system operates normally, but won't actuate any servos */ #define PX4IO_P_SETUP_ARMING_FORCE_FAILSAFE (1 << 8) /* If set, the system will always output the failsafe values */ #define PX4IO_P_SETUP_ARMING_TERMINATION_FAILSAFE (1 << 9) /* If set, the system will never return from a failsafe, but remain in failsafe once triggered. */ +#define PX4IO_P_SETUP_ARMING_OVERRIDE_IMMEDIATE (1 << 10) /* If set then on FMU failure override is immediate. Othewise it waits for the mode switch to go past the override thrshold */ #define PX4IO_P_SETUP_PWM_RATES 2 /* bitmask, 0 = low rate, 1 = high rate */ #define PX4IO_P_SETUP_PWM_DEFAULTRATE 3 /* 'low' PWM frame output rate in Hz */ @@ -221,6 +222,7 @@ enum { /* DSM bind states */ hence index 12 can safely be used. */ #define PX4IO_P_SETUP_RC_THR_FAILSAFE_US 13 /**< the throttle failsafe pulse length in microseconds */ +#define PX4IO_P_SETUP_FORCE_SAFETY_ON 14 /* force safety switch into 'disarmed' (PWM disabled state) */ #define PX4IO_FORCE_SAFETY_MAGIC 22027 /* required argument for force safety (random) */ /* autopilot control values, -10000..10000 */ @@ -246,6 +248,7 @@ enum { /* DSM bind states */ #define PX4IO_P_RC_CONFIG_MAX 2 /**< highest input value */ #define PX4IO_P_RC_CONFIG_DEADZONE 3 /**< band around center that is ignored */ #define PX4IO_P_RC_CONFIG_ASSIGNMENT 4 /**< mapped input value */ +#define PX4IO_P_RC_CONFIG_ASSIGNMENT_MODESWITCH 100 /**< magic value for mode switch */ #define PX4IO_P_RC_CONFIG_OPTIONS 5 /**< channel options bitmask */ #define PX4IO_P_RC_CONFIG_OPTIONS_ENABLED (1 << 0) #define PX4IO_P_RC_CONFIG_OPTIONS_REVERSE (1 << 1) diff --git a/src/modules/px4iofirmware/px4io.c b/src/modules/px4iofirmware/px4io.c index cd134ccb4..14ee9cb40 100644 --- a/src/modules/px4iofirmware/px4io.c +++ b/src/modules/px4iofirmware/px4io.c @@ -85,6 +85,9 @@ static volatile uint8_t msg_next_out, msg_next_in; #define NUM_MSG 2 static char msg[NUM_MSG][40]; +static void heartbeat_blink(void); +static void ring_blink(void); + /* * add a debug message to be printed on the console */ @@ -126,6 +129,65 @@ heartbeat_blink(void) LED_BLUE(heartbeat = !heartbeat); } +static void +ring_blink(void) +{ +#ifdef GPIO_LED4 + + if (/* IO armed */ (r_status_flags & PX4IO_P_STATUS_FLAGS_SAFETY_OFF) + /* and FMU is armed */ && (r_setup_arming & PX4IO_P_SETUP_ARMING_FMU_ARMED)) { + LED_RING(1); + return; + } + + // XXX this led code does have + // intentionally a few magic numbers. + const unsigned max_brightness = 118; + + static unsigned counter = 0; + static unsigned brightness = max_brightness; + static unsigned brightness_counter = 0; + static unsigned on_counter = 0; + + if (brightness_counter < max_brightness) { + + bool on = ((on_counter * 100) / brightness_counter+1) <= ((brightness * 100) / max_brightness+1); + + // XXX once led is PWM driven, + // remove the ! in the line below + // to return to the proper breathe + // animation / pattern (currently inverted) + LED_RING(!on); + brightness_counter++; + + if (on) { + on_counter++; + } + + } else { + + if (counter >= 62) { + counter = 0; + } + + int n; + + if (counter < 32) { + n = counter; + + } else { + n = 62 - counter; + } + + brightness = (n * n) / 8; + brightness_counter = 0; + on_counter = 0; + counter++; + } + +#endif +} + static uint64_t reboot_time; /** @@ -191,6 +253,9 @@ user_start(int argc, char *argv[]) LED_AMBER(false); LED_BLUE(false); LED_SAFETY(false); +#ifdef GPIO_LED4 + LED_RING(false); +#endif /* turn on servo power (if supported) */ #ifdef POWER_SERVO @@ -294,6 +359,8 @@ user_start(int argc, char *argv[]) heartbeat_blink(); } + ring_blink(); + check_reboot(); /* check for debug activity (default: none) */ diff --git a/src/modules/px4iofirmware/px4io.h b/src/modules/px4iofirmware/px4io.h index e32fcc72b..93a33490f 100644 --- a/src/modules/px4iofirmware/px4io.h +++ b/src/modules/px4iofirmware/px4io.h @@ -140,6 +140,7 @@ extern pwm_limit_t pwm_limit; #define LED_BLUE(_s) stm32_gpiowrite(GPIO_LED1, !(_s)) #define LED_AMBER(_s) stm32_gpiowrite(GPIO_LED2, !(_s)) #define LED_SAFETY(_s) stm32_gpiowrite(GPIO_LED3, !(_s)) +#define LED_RING(_s) stm32_gpiowrite(GPIO_LED4, (_s)) #ifdef CONFIG_ARCH_BOARD_PX4IO_V1 diff --git a/src/modules/px4iofirmware/registers.c b/src/modules/px4iofirmware/registers.c index 7a5a5e484..fbfdd35db 100644 --- a/src/modules/px4iofirmware/registers.c +++ b/src/modules/px4iofirmware/registers.c @@ -191,7 +191,8 @@ volatile uint16_t r_page_setup[] = PX4IO_P_SETUP_ARMING_RC_HANDLING_DISABLED | \ PX4IO_P_SETUP_ARMING_LOCKDOWN | \ PX4IO_P_SETUP_ARMING_FORCE_FAILSAFE | \ - PX4IO_P_SETUP_ARMING_TERMINATION_FAILSAFE) + PX4IO_P_SETUP_ARMING_TERMINATION_FAILSAFE | \ + PX4IO_P_SETUP_ARMING_OVERRIDE_IMMEDIATE) #define PX4IO_P_SETUP_RATES_VALID ((1 << PX4IO_SERVO_COUNT) - 1) #define PX4IO_P_SETUP_RELAYS_VALID ((1 << PX4IO_RELAY_CHANNELS) - 1) @@ -603,6 +604,12 @@ registers_set_one(uint8_t page, uint8_t offset, uint16_t value) dsm_bind(value & 0x0f, (value >> 4) & 0xF); break; + case PX4IO_P_SETUP_FORCE_SAFETY_ON: + if (value == PX4IO_FORCE_SAFETY_MAGIC) { + r_status_flags &= ~PX4IO_P_STATUS_FLAGS_SAFETY_OFF; + } + break; + case PX4IO_P_SETUP_FORCE_SAFETY_OFF: if (value == PX4IO_FORCE_SAFETY_MAGIC) { r_status_flags |= PX4IO_P_STATUS_FLAGS_SAFETY_OFF; @@ -686,7 +693,8 @@ registers_set_one(uint8_t page, uint8_t offset, uint16_t value) if (conf[PX4IO_P_RC_CONFIG_ASSIGNMENT] == UINT8_MAX) { disabled = true; - } else if (conf[PX4IO_P_RC_CONFIG_ASSIGNMENT] >= PX4IO_RC_MAPPED_CONTROL_CHANNELS) { + } else if ((conf[PX4IO_P_RC_CONFIG_ASSIGNMENT] >= PX4IO_RC_MAPPED_CONTROL_CHANNELS) && + (conf[PX4IO_P_RC_CONFIG_ASSIGNMENT] != PX4IO_P_RC_CONFIG_ASSIGNMENT_MODESWITCH)) { count++; } diff --git a/src/modules/px4iofirmware/sbus.c b/src/modules/px4iofirmware/sbus.c index 0f0414148..d76ec55f0 100644 --- a/src/modules/px4iofirmware/sbus.c +++ b/src/modules/px4iofirmware/sbus.c @@ -57,11 +57,12 @@ #define SBUS_FLAGS_BYTE 23 #define SBUS_FAILSAFE_BIT 3 #define SBUS_FRAMELOST_BIT 2 +#define SBUS1_FRAME_DELAY 14000 /* Measured values with Futaba FX-30/R6108SB: -+100% on TX: PCM 1.100/1.520/1.950ms -> SBus raw values: 350/1024/1700 (100% ATV) - -+140% on TX: PCM 0.930/1.520/2.112ms -> SBus raw values: 78/1024/1964 (140% ATV) + -+140% on TX: PCM 0.930/1.520/2.112ms -> SBus raw values: 78/1024/1964 (140% ATV) -+152% on TX: PCM 0.884/1.520/2.160ms -> SBus raw values: 1/1024/2047 (140% ATV plus dirty tricks) */ @@ -80,6 +81,7 @@ static int sbus_fd = -1; static hrt_abstime last_rx_time; static hrt_abstime last_frame_time; +static hrt_abstime last_txframe_time = 0; static uint8_t frame[SBUS_FRAME_SIZE]; @@ -87,13 +89,15 @@ static unsigned partial_frame_count; unsigned sbus_frame_drops; -static bool sbus_decode(hrt_abstime frame_time, uint16_t *values, uint16_t *num_values, bool *sbus_failsafe, bool *sbus_frame_drop, uint16_t max_channels); +static bool sbus_decode(hrt_abstime frame_time, uint16_t *values, uint16_t *num_values, bool *sbus_failsafe, + bool *sbus_frame_drop, uint16_t max_channels); int sbus_init(const char *device) { - if (sbus_fd < 0) + if (sbus_fd < 0) { sbus_fd = open(device, O_RDWR | O_NONBLOCK); + } if (sbus_fd >= 0) { struct termios t; @@ -113,16 +117,49 @@ sbus_init(const char *device) } else { debug("S.Bus: open failed"); } + return sbus_fd; } void sbus1_output(uint16_t *values, uint16_t num_values) { - char a = 'A'; - write(sbus_fd, &a, 1); -} + uint8_t byteindex = 1; /*Data starts one byte into the sbus frame. */ + uint8_t offset = 0; + uint16_t value; + hrt_abstime now; + + now = hrt_absolute_time(); + + if ((now - last_txframe_time) > SBUS1_FRAME_DELAY) { + last_txframe_time = now; + uint8_t oframe[SBUS_FRAME_SIZE] = { 0x0f }; + + /* 16 is sbus number of servos/channels minus 2 single bit channels. + * currently ignoring single bit channels. */ + for (unsigned i = 0; (i < num_values) && (i < 16); ++i) { + value = (uint16_t)(((values[i] - SBUS_SCALE_OFFSET) / SBUS_SCALE_FACTOR) + .5f); + + /*protect from out of bounds values and limit to 11 bits*/ + if (value > 0x07ff ) { + value = 0x07ff; + } + + while (offset >= 8) { + ++byteindex; + offset -= 8; + } + + oframe[byteindex] |= (value << (offset)) & 0xff; + oframe[byteindex + 1] |= (value >> (8 - offset)) & 0xff; + oframe[byteindex + 2] |= (value >> (16 - offset)) & 0xff; + offset += 11; + } + + write(sbus_fd, oframe, SBUS_FRAME_SIZE); + } +} void sbus2_output(uint16_t *values, uint16_t num_values) { @@ -167,8 +204,9 @@ sbus_input(uint16_t *values, uint16_t *num_values, bool *sbus_failsafe, bool *sb ret = read(sbus_fd, &frame[partial_frame_count], SBUS_FRAME_SIZE - partial_frame_count); /* if the read failed for any reason, just give up here */ - if (ret < 1) + if (ret < 1) { return false; + } last_rx_time = now; @@ -180,8 +218,9 @@ sbus_input(uint16_t *values, uint16_t *num_values, bool *sbus_failsafe, bool *sb /* * If we don't have a full frame, return */ - if (partial_frame_count < SBUS_FRAME_SIZE) + if (partial_frame_count < SBUS_FRAME_SIZE) { return false; + } /* * Great, it looks like we might have a frame. Go ahead and @@ -228,7 +267,8 @@ static const struct sbus_bit_pick sbus_decoder[SBUS_INPUT_CHANNELS][3] = { }; static bool -sbus_decode(hrt_abstime frame_time, uint16_t *values, uint16_t *num_values, bool *sbus_failsafe, bool *sbus_frame_drop, uint16_t max_values) +sbus_decode(hrt_abstime frame_time, uint16_t *values, uint16_t *num_values, bool *sbus_failsafe, bool *sbus_frame_drop, + uint16_t max_values) { /* check frame boundary markers to avoid out-of-sync cases */ if ((frame[0] != 0x0f)) { @@ -237,23 +277,27 @@ sbus_decode(hrt_abstime frame_time, uint16_t *values, uint16_t *num_values, bool } switch (frame[24]) { - case 0x00: + case 0x00: /* this is S.BUS 1 */ break; - case 0x03: + + case 0x03: /* S.BUS 2 SLOT0: RX battery and external voltage */ break; - case 0x83: + + case 0x83: /* S.BUS 2 SLOT1 */ break; - case 0x43: - case 0xC3: - case 0x23: - case 0xA3: - case 0x63: - case 0xE3: + + case 0x43: + case 0xC3: + case 0x23: + case 0xA3: + case 0x63: + case 0xE3: break; - default: + + default: /* we expect one of the bits above, but there are some we don't know yet */ break; } @@ -283,7 +327,7 @@ sbus_decode(hrt_abstime frame_time, uint16_t *values, uint16_t *num_values, bool /* convert 0-2048 values to 1000-2000 ppm encoding in a not too sloppy fashion */ - values[channel] = (uint16_t)(value * SBUS_SCALE_FACTOR +.5f) + SBUS_SCALE_OFFSET; + values[channel] = (uint16_t)(value * SBUS_SCALE_FACTOR + .5f) + SBUS_SCALE_OFFSET; } /* decode switch channels if data fields are wide enough */ @@ -304,16 +348,17 @@ sbus_decode(hrt_abstime frame_time, uint16_t *values, uint16_t *num_values, bool /* report that we failed to read anything valid off the receiver */ *sbus_failsafe = true; *sbus_frame_drop = true; - } - else if (frame[SBUS_FLAGS_BYTE] & (1 << SBUS_FRAMELOST_BIT)) { /* a frame was lost */ + + } else if (frame[SBUS_FLAGS_BYTE] & (1 << SBUS_FRAMELOST_BIT)) { /* a frame was lost */ /* set a special warning flag - * - * Attention! This flag indicates a skipped frame only, not a total link loss! Handling this - * condition as fail-safe greatly reduces the reliability and range of the radio link, + * + * Attention! This flag indicates a skipped frame only, not a total link loss! Handling this + * condition as fail-safe greatly reduces the reliability and range of the radio link, * e.g. by prematurely issueing return-to-launch!!! */ *sbus_failsafe = false; *sbus_frame_drop = true; + } else { *sbus_failsafe = false; *sbus_frame_drop = false; diff --git a/src/modules/sdlog2/module.mk b/src/modules/sdlog2/module.mk index a28d43e72..d4a00af39 100644 --- a/src/modules/sdlog2/module.mk +++ b/src/modules/sdlog2/module.mk @@ -43,3 +43,5 @@ SRCS = sdlog2.c \ logbuffer.c MODULE_STACKSIZE = 1200 + +MAXOPTIMIZATION = -Os diff --git a/src/modules/sdlog2/sdlog2.c b/src/modules/sdlog2/sdlog2.c index 1282bc0ea..af580f1f7 100644 --- a/src/modules/sdlog2/sdlog2.c +++ b/src/modules/sdlog2/sdlog2.c @@ -90,6 +90,7 @@ #include <uORB/topics/system_power.h> #include <uORB/topics/servorail_status.h> #include <uORB/topics/wind_estimate.h> +#include <uORB/topics/encoders.h> #include <systemlib/systemlib.h> #include <systemlib/param/param.h> @@ -954,6 +955,7 @@ int sdlog2_thread_main(int argc, char *argv[]) struct servorail_status_s servorail_status; struct satellite_info_s sat_info; struct wind_estimate_s wind_estimate; + struct encoders_s encoders; } buf; memset(&buf, 0, sizeof(buf)); @@ -996,6 +998,7 @@ int sdlog2_thread_main(int argc, char *argv[]) struct log_GS1B_s log_GS1B; struct log_TECS_s log_TECS; struct log_WIND_s log_WIND; + struct log_ENCD_s log_ENCD; } body; } log_msg = { LOG_PACKET_HEADER_INIT(0) @@ -1033,12 +1036,12 @@ int sdlog2_thread_main(int argc, char *argv[]) int system_power_sub; int servorail_status_sub; int wind_sub; + int encoders_sub; } subs; subs.cmd_sub = orb_subscribe(ORB_ID(vehicle_command)); subs.status_sub = orb_subscribe(ORB_ID(vehicle_status)); subs.gps_pos_sub = orb_subscribe(ORB_ID(vehicle_gps_position)); - subs.sat_info_sub = orb_subscribe(ORB_ID(satellite_info)); subs.sensor_sub = orb_subscribe(ORB_ID(sensor_combined)); subs.att_sub = orb_subscribe(ORB_ID(vehicle_attitude)); subs.att_sp_sub = orb_subscribe(ORB_ID(vehicle_attitude_setpoint)); @@ -1057,9 +1060,6 @@ int sdlog2_thread_main(int argc, char *argv[]) subs.esc_sub = orb_subscribe(ORB_ID(esc_status)); subs.global_vel_sp_sub = orb_subscribe(ORB_ID(vehicle_global_velocity_setpoint)); subs.battery_sub = orb_subscribe(ORB_ID(battery_status)); - for (int i = 0; i < TELEMETRY_STATUS_ORB_ID_NUM; i++) { - subs.telemetry_subs[i] = orb_subscribe(telemetry_status_orb_id[i]); - } subs.range_finder_sub = orb_subscribe(ORB_ID(sensor_range_finder)); subs.estimator_status_sub = orb_subscribe(ORB_ID(estimator_status)); subs.tecs_status_sub = orb_subscribe(ORB_ID(tecs_status)); @@ -1068,6 +1068,25 @@ int sdlog2_thread_main(int argc, char *argv[]) subs.wind_sub = orb_subscribe(ORB_ID(wind_estimate)); /* we need to rate-limit wind, as we do not need the full update rate */ orb_set_interval(subs.wind_sub, 90); + subs.encoders_sub = orb_subscribe(ORB_ID(encoders)); + + /* add new topics HERE */ + + + for (int i = 0; i < TELEMETRY_STATUS_ORB_ID_NUM; i++) { + subs.telemetry_subs[i] = orb_subscribe(telemetry_status_orb_id[i]); + } + + if (_extended_logging) { + subs.sat_info_sub = orb_subscribe(ORB_ID(satellite_info)); + } + + /* close non-needed fd's */ + + /* close stdin */ + close(0); + /* close stdout */ + close(1); thread_running = true; @@ -1652,6 +1671,16 @@ int sdlog2_thread_main(int argc, char *argv[]) LOGBUFFER_WRITE_AND_COUNT(WIND); } + /* --- ENCODERS --- */ + if (copy_if_updated(ORB_ID(encoders), subs.encoders_sub, &buf.encoders)) { + log_msg.msg_type = LOG_ENCD_MSG; + log_msg.body.log_ENCD.cnt0 = buf.encoders.counts[0]; + log_msg.body.log_ENCD.vel0 = buf.encoders.velocity[0]; + log_msg.body.log_ENCD.cnt1 = buf.encoders.counts[1]; + log_msg.body.log_ENCD.vel1 = buf.encoders.velocity[1]; + LOGBUFFER_WRITE_AND_COUNT(ENCD); + } + /* signal the other thread new data, but not yet unlock */ if (logbuffer_count(&lb) > MIN_BYTES_TO_WRITE) { /* only request write if several packets can be written at once */ diff --git a/src/modules/sdlog2/sdlog2_messages.h b/src/modules/sdlog2/sdlog2_messages.h index d49fc0c79..fa9bdacb8 100644 --- a/src/modules/sdlog2/sdlog2_messages.h +++ b/src/modules/sdlog2/sdlog2_messages.h @@ -407,6 +407,16 @@ struct log_VISN_s { float qw; }; +/* --- ENCODERS - ENCODER DATA --- */ +#define LOG_ENCD_MSG 39 +struct log_ENCD_s { + int64_t cnt0; + float vel0; + int64_t cnt1; + float vel1; +}; + + /********** SYSTEM MESSAGES, ID > 0x80 **********/ /* --- TIME - TIME STAMP --- */ @@ -471,6 +481,7 @@ static const struct log_format_s log_formats[] = { LOG_FORMAT(GS1B, "BBBBBBBBBBBBBBBB", "s0,s1,s2,s3,s4,s5,s6,s7,s8,s9,s10,s11,s12,s13,s14,s15"), LOG_FORMAT(TECS, "fffffffffffffB", "ASP,AF,FSP,F,FF,AsSP,AsF,AsDSP,AsD,TERSP,TER,EDRSP,EDR,M"), LOG_FORMAT(WIND, "ffff", "X,Y,CovX,CovY"), + LOG_FORMAT(ENCD, "qfqf", "cnt0,vel0,cnt1,vel1"), /* system-level messages, ID >= 0x80 */ /* FMT: don't write format of format message, it's useless */ diff --git a/src/modules/sensors/module.mk b/src/modules/sensors/module.mk index 5b1bc5e86..dfbba92d9 100644 --- a/src/modules/sensors/module.mk +++ b/src/modules/sensors/module.mk @@ -42,3 +42,5 @@ SRCS = sensors.cpp \ sensor_params.c MODULE_STACKSIZE = 1200 + +MAXOPTIMIZATION = -Os diff --git a/src/modules/systemlib/mcu_version.c b/src/modules/systemlib/mcu_version.c new file mode 100644 index 000000000..4bcf95784 --- /dev/null +++ b/src/modules/systemlib/mcu_version.c @@ -0,0 +1,109 @@ +/**************************************************************************** + * + * Copyright (c) 2014 PX4 Development Team. All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * 3. Neither the name PX4 nor the names of its contributors may be + * used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS + * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE + * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, + * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS + * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED + * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN + * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************/ + +/** + * @file mcu_version.c + * + * Read out the microcontroller version from the board + * + * @author Lorenz Meier <lorenz@px4.io> + * + */ + +#include "mcu_version.h" + +#include <nuttx/config.h> + +#ifdef CONFIG_ARCH_CHIP_STM32 +#include <up_arch.h> + +#define DBGMCU_IDCODE 0xE0042000 + +#define STM32F40x_41x 0x413 +#define STM32F42x_43x 0x419 + +#define REVID_MASK 0xFFFF0000 +#define DEVID_MASK 0xFFF + +#endif + + + +int mcu_version(char* rev, char** revstr) +{ +#ifdef CONFIG_ARCH_CHIP_STM32 + uint32_t abc = getreg32(DBGMCU_IDCODE); + + int32_t chip_version = abc & DEVID_MASK; + enum MCU_REV revid = (abc & REVID_MASK) >> 16; + + switch (chip_version) { + case STM32F40x_41x: + *revstr = "STM32F40x"; + break; + case STM32F42x_43x: + *revstr = "STM32F42x"; + break; + default: + *revstr = "STM32F???"; + break; + } + + switch (revid) { + + case MCU_REV_STM32F4_REV_A: + *rev = 'A'; + break; + case MCU_REV_STM32F4_REV_Z: + *rev = 'Z'; + break; + case MCU_REV_STM32F4_REV_Y: + *rev = 'Y'; + break; + case MCU_REV_STM32F4_REV_1: + *rev = '1'; + break; + case MCU_REV_STM32F4_REV_3: + *rev = '3'; + break; + default: + *rev = '?'; + revid = -1; + break; + } + + return revid; +#else + return -1; +#endif +} diff --git a/src/modules/systemlib/mcu_version.h b/src/modules/systemlib/mcu_version.h new file mode 100644 index 000000000..1b3d0aba9 --- /dev/null +++ b/src/modules/systemlib/mcu_version.h @@ -0,0 +1,52 @@ +/**************************************************************************** + * + * Copyright (c) 2014 PX4 Development Team. All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * 3. Neither the name PX4 nor the names of its contributors may be + * used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS + * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE + * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, + * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS + * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED + * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN + * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************/ + +#pragma once + +/* magic numbers from reference manual */ +enum MCU_REV { + MCU_REV_STM32F4_REV_A = 0x1000, + MCU_REV_STM32F4_REV_Z = 0x1001, + MCU_REV_STM32F4_REV_Y = 0x1003, + MCU_REV_STM32F4_REV_1 = 0x1007, + MCU_REV_STM32F4_REV_3 = 0x2001 +}; + +/** + * Reports the microcontroller version of the main CPU. + * + * @param rev The silicon revision character + * @param revstr The full chip name string + * @return The silicon revision / version number as integer + */ +__EXPORT int mcu_version(char* rev, char** revstr); diff --git a/src/modules/systemlib/mixer/mixer_load.c b/src/modules/systemlib/mixer/mixer_load.c index bf3428a50..0d629d610 100644 --- a/src/modules/systemlib/mixer/mixer_load.c +++ b/src/modules/systemlib/mixer/mixer_load.c @@ -91,6 +91,7 @@ int load_mixer_file(const char *fname, char *buf, unsigned maxlen) /* if the line is too long to fit in the buffer, bail */ if ((strlen(line) + strlen(buf) + 1) >= maxlen) { warnx("line too long"); + fclose(fp); return -1; } @@ -98,6 +99,7 @@ int load_mixer_file(const char *fname, char *buf, unsigned maxlen) strcat(buf, line); } + fclose(fp); return 0; } diff --git a/src/modules/systemlib/module.mk b/src/modules/systemlib/module.mk index 147903aa0..fe8b7e75a 100644 --- a/src/modules/systemlib/module.mk +++ b/src/modules/systemlib/module.mk @@ -53,5 +53,7 @@ SRCS = err.c \ otp.c \ board_serial.c \ pwm_limit/pwm_limit.c \ - circuit_breaker.c + circuit_breaker.c \ + mcu_version.c +MAXOPTIMIZATION = -Os diff --git a/src/modules/uORB/module.mk b/src/modules/uORB/module.mk index 0c29101fe..9385ce253 100644 --- a/src/modules/uORB/module.mk +++ b/src/modules/uORB/module.mk @@ -44,3 +44,5 @@ SRCS = uORB.cpp \ objects_common.cpp \ Publication.cpp \ Subscription.cpp + +MAXOPTIMIZATION = -Os diff --git a/src/modules/uORB/objects_common.cpp b/src/modules/uORB/objects_common.cpp index b921865eb..b91a00c1e 100644 --- a/src/modules/uORB/objects_common.cpp +++ b/src/modules/uORB/objects_common.cpp @@ -201,6 +201,9 @@ ORB_DEFINE(telemetry_status_1, struct telemetry_status_s); ORB_DEFINE(telemetry_status_2, struct telemetry_status_s); ORB_DEFINE(telemetry_status_3, struct telemetry_status_s); +#include "topics/test_motor.h" +ORB_DEFINE(test_motor, struct test_motor_s); + #include "topics/debug_key_value.h" ORB_DEFINE(debug_key_value, struct debug_key_value_s); diff --git a/src/modules/uORB/topics/manual_control_setpoint.h b/src/modules/uORB/topics/manual_control_setpoint.h index dde237adc..50b7bd9e5 100644 --- a/src/modules/uORB/topics/manual_control_setpoint.h +++ b/src/modules/uORB/topics/manual_control_setpoint.h @@ -47,7 +47,7 @@ * Switch position */ typedef enum { - SWITCH_POS_NONE = 0, /**< switch is not mapped */ + SWITCH_POS_NONE = 0, /**< switch is not mapped */ SWITCH_POS_ON, /**< switch activated (value = 1) */ SWITCH_POS_MIDDLE, /**< middle position (value = 0) */ SWITCH_POS_OFF /**< switch not activated (value = -1) */ @@ -93,13 +93,13 @@ struct manual_control_setpoint_s { float aux4; /**< default function: camera roll */ float aux5; /**< default function: payload drop */ - switch_pos_t mode_switch; /**< main mode 3 position switch (mandatory): _MANUAL_, ASSIST, AUTO */ - switch_pos_t return_switch; /**< return to launch 2 position switch (mandatory): _NORMAL_, RTL */ - switch_pos_t posctl_switch; /**< position control 2 position switch (optional): _ALTCTL_, POSCTL */ - switch_pos_t loiter_switch; /**< loiter 2 position switch (optional): _MISSION_, LOITER */ - switch_pos_t acro_switch; /**< acro 2 position switch (optional): _MANUAL_, ACRO */ - switch_pos_t offboard_switch; /**< offboard 2 position switch (optional): _NORMAL_, OFFBOARD */ -}; /**< manual control inputs */ + switch_pos_t mode_switch; /**< main mode 3 position switch (mandatory): _MANUAL_, ASSIST, AUTO */ + switch_pos_t return_switch; /**< return to launch 2 position switch (mandatory): _NORMAL_, RTL */ + switch_pos_t posctl_switch; /**< position control 2 position switch (optional): _ALTCTL_, POSCTL */ + switch_pos_t loiter_switch; /**< loiter 2 position switch (optional): _MISSION_, LOITER */ + switch_pos_t acro_switch; /**< acro 2 position switch (optional): _MANUAL_, ACRO */ + switch_pos_t offboard_switch; /**< offboard 2 position switch (optional): _NORMAL_, OFFBOARD */ +}; /** * @} diff --git a/src/modules/uORB/topics/rc_channels.h b/src/modules/uORB/topics/rc_channels.h index 8978de471..16916cc4d 100644 --- a/src/modules/uORB/topics/rc_channels.h +++ b/src/modules/uORB/topics/rc_channels.h @@ -34,6 +34,8 @@ /** * @file rc_channels.h * Definition of the rc_channels uORB topic. + * + * @deprecated DO NOT USE FOR NEW CODE */ #ifndef RC_CHANNELS_H_ @@ -63,10 +65,13 @@ enum RC_CHANNELS_FUNCTION { AUX_2, AUX_3, AUX_4, - AUX_5, - RC_CHANNELS_FUNCTION_MAX /**< Indicates the number of functions. There can be more functions than RC channels. */ + AUX_5 }; +// MAXIMUM FUNCTIONS IS != MAXIMUM RC INPUT CHANNELS + +#define RC_CHANNELS_FUNCTION_MAX 18 + /** * @addtogroup topics * @{ @@ -76,7 +81,6 @@ struct rc_channels_s { uint64_t timestamp_last_valid; /**< Timestamp of last valid RC signal */ float channels[RC_CHANNELS_FUNCTION_MAX]; /**< Scaled to -1..1 (throttle: 0..1) */ uint8_t channel_count; /**< Number of valid channels */ - char function_name[RC_CHANNELS_FUNCTION_MAX][20]; /**< String array to store the names of the functions */ int8_t function[RC_CHANNELS_FUNCTION_MAX]; /**< Functions mapping */ uint8_t rssi; /**< Receive signal strength index */ bool signal_lost; /**< Control signal lost, should be checked together with topic timeout */ diff --git a/src/modules/uORB/topics/test_motor.h b/src/modules/uORB/topics/test_motor.h new file mode 100644 index 000000000..2dd90e69d --- /dev/null +++ b/src/modules/uORB/topics/test_motor.h @@ -0,0 +1,70 @@ +/**************************************************************************** + * + * Copyright (C) 2014 PX4 Development Team. All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * 3. Neither the name PX4 nor the names of its contributors may be + * used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS + * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE + * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, + * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS + * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED + * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN + * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************/ + +/** + * @file test_motor.h + * + * Test a single drive motor while the vehicle is disarmed + * + * Publishing values to this topic causes a single motor to spin, e.g. for + * ground test purposes. This topic will be ignored while the vehicle is armed. + * + */ + +#ifndef TOPIC_TEST_MOTOR_H +#define TOPIC_TEST_MOTOR_H + +#include <stdint.h> +#include "../uORB.h" + +#define NUM_MOTOR_OUTPUTS 8 + +/** + * @addtogroup topics + * @{ + */ + +struct test_motor_s { + uint64_t timestamp; /**< output timestamp in us since system boot */ + unsigned motor_number; /**< number of motor to spin */ + float value; /**< output power, range [0..1] */ +}; + +/** + * @} + */ + +/* actuator output sets; this list can be expanded as more drivers emerge */ +ORB_DECLARE(test_motor); + +#endif diff --git a/src/modules/uORB/topics/vehicle_status.h b/src/modules/uORB/topics/vehicle_status.h index 8d797e21a..8ec9d98d6 100644 --- a/src/modules/uORB/topics/vehicle_status.h +++ b/src/modules/uORB/topics/vehicle_status.h @@ -108,7 +108,7 @@ typedef enum { NAVIGATION_STATE_AUTO_LANDGPSFAIL, /**< Auto land on gps failure (e.g. open loop loiter down) */ NAVIGATION_STATE_ACRO, /**< Acro mode */ NAVIGATION_STATE_LAND, /**< Land mode */ - NAVIGATION_STATE_DESCEND, /**< Descend mode (no position control) */ + NAVIGATION_STATE_DESCEND, /**< Descend mode (no position control) */ NAVIGATION_STATE_TERMINATION, /**< Termination mode */ NAVIGATION_STATE_OFFBOARD, NAVIGATION_STATE_MAX, diff --git a/src/modules/uavcan/actuators/esc.cpp b/src/modules/uavcan/actuators/esc.cpp index 1990651ef..1d23099f3 100644 --- a/src/modules/uavcan/actuators/esc.cpp +++ b/src/modules/uavcan/actuators/esc.cpp @@ -40,6 +40,9 @@ #include "esc.hpp" #include <systemlib/err.h> + +#define MOTOR_BIT(x) (1<<(x)) + UavcanEscController::UavcanEscController(uavcan::INode &node) : _node(node), _uavcan_pub_raw_cmd(node), @@ -95,9 +98,8 @@ void UavcanEscController::update_outputs(float *outputs, unsigned num_outputs) static const int cmd_max = uavcan::equipment::esc::RawCommand::FieldTypes::cmd::RawValueType::max(); - if (_armed) { - for (unsigned i = 0; i < num_outputs; i++) { - + for (unsigned i = 0; i < num_outputs; i++) { + if (_armed_mask & MOTOR_BIT(i)) { float scaled = (outputs[i] + 1.0F) * 0.5F * cmd_max; if (scaled < 1.0F) { scaled = 1.0F; // Since we're armed, we don't want to stop it completely @@ -111,6 +113,8 @@ void UavcanEscController::update_outputs(float *outputs, unsigned num_outputs) msg.cmd.push_back(static_cast<int>(scaled)); _esc_status.esc[i].esc_setpoint_raw = abs(static_cast<int>(scaled)); + } else { + msg.cmd.push_back(static_cast<unsigned>(0)); } } @@ -121,9 +125,22 @@ void UavcanEscController::update_outputs(float *outputs, unsigned num_outputs) (void)_uavcan_pub_raw_cmd.broadcast(msg); } -void UavcanEscController::arm_esc(bool arm) +void UavcanEscController::arm_all_escs(bool arm) +{ + if (arm) { + _armed_mask = -1; + } else { + _armed_mask = 0; + } +} + +void UavcanEscController::arm_single_esc(int num, bool arm) { - _armed = arm; + if (arm) { + _armed_mask = MOTOR_BIT(num); + } else { + _armed_mask = 0; + } } void UavcanEscController::esc_status_sub_cb(const uavcan::ReceivedDataStructure<uavcan::equipment::esc::Status> &msg) diff --git a/src/modules/uavcan/actuators/esc.hpp b/src/modules/uavcan/actuators/esc.hpp index f4a3877e6..12c035542 100644 --- a/src/modules/uavcan/actuators/esc.hpp +++ b/src/modules/uavcan/actuators/esc.hpp @@ -61,7 +61,8 @@ public: void update_outputs(float *outputs, unsigned num_outputs); - void arm_esc(bool arm); + void arm_all_escs(bool arm); + void arm_single_esc(int num, bool arm); private: /** @@ -99,6 +100,11 @@ private: uavcan::TimerEventForwarder<TimerCbBinder> _orb_timer; /* + * ESC states + */ + uint32_t _armed_mask = 0; + + /* * Perf counters */ perf_counter_t _perfcnt_invalid_input = perf_alloc(PC_COUNT, "uavcan_esc_invalid_input"); diff --git a/src/modules/uavcan/sensors/mag.cpp b/src/modules/uavcan/sensors/mag.cpp index 8e6a9a22f..0d9ea08c5 100644 --- a/src/modules/uavcan/sensors/mag.cpp +++ b/src/modules/uavcan/sensors/mag.cpp @@ -49,6 +49,8 @@ UavcanMagnetometerBridge::UavcanMagnetometerBridge(uavcan::INode& node) : UavcanCDevSensorBridgeBase("uavcan_mag", "/dev/uavcan/mag", MAG_DEVICE_PATH, MAG_TOPICS), _sub_mag(node) { + _device_id.devid_s.devtype = DRV_MAG_DEVTYPE_HMC5883; + _scale.x_scale = 1.0F; _scale.y_scale = 1.0F; _scale.z_scale = 1.0F; diff --git a/src/modules/uavcan/sensors/sensor_bridge.cpp b/src/modules/uavcan/sensors/sensor_bridge.cpp index 9608ce680..0999938fc 100644 --- a/src/modules/uavcan/sensors/sensor_bridge.cpp +++ b/src/modules/uavcan/sensors/sensor_bridge.cpp @@ -103,6 +103,9 @@ void UavcanCDevSensorBridgeBase::publish(const int node_id, const void *report) return; } + // update device id as we now know our device node_id + _device_id.devid_s.address = static_cast<uint8_t>(node_id); + // Ask the CDev helper which class instance we can take const int class_instance = register_class_devname(_class_devname); if (class_instance < 0 || class_instance >= int(_max_channels)) { diff --git a/src/modules/uavcan/sensors/sensor_bridge.hpp b/src/modules/uavcan/sensors/sensor_bridge.hpp index 1316f7ecc..e31960537 100644 --- a/src/modules/uavcan/sensors/sensor_bridge.hpp +++ b/src/modules/uavcan/sensors/sensor_bridge.hpp @@ -112,6 +112,8 @@ protected: _channels(new Channel[MaxChannels]) { memcpy(_orb_topics, orb_topics, sizeof(orb_id_t) * MaxChannels); + _device_id.devid_s.bus_type = DeviceBusType_UAVCAN; + _device_id.devid_s.bus = 0; } /** diff --git a/src/modules/uavcan/uavcan_main.cpp b/src/modules/uavcan/uavcan_main.cpp index a8485ee44..2c543462e 100644 --- a/src/modules/uavcan/uavcan_main.cpp +++ b/src/modules/uavcan/uavcan_main.cpp @@ -279,6 +279,7 @@ int UavcanNode::run() _output_count = 2; _armed_sub = orb_subscribe(ORB_ID(actuator_armed)); + _test_motor_sub = orb_subscribe(ORB_ID(test_motor)); actuator_outputs_s outputs; memset(&outputs, 0, sizeof(outputs)); @@ -344,7 +345,13 @@ int UavcanNode::run() } // can we mix? - if (controls_updated && (_mixers != nullptr)) { + if (_test_in_progress) { + float test_outputs[NUM_ACTUATOR_OUTPUTS] = {}; + test_outputs[_test_motor.motor_number] = _test_motor.value*2.0f-1.0f; + + // Output to the bus + _esc_controller.update_outputs(test_outputs, NUM_ACTUATOR_OUTPUTS); + } else if (controls_updated && (_mixers != nullptr)) { // XXX one output group has 8 outputs max, // but this driver could well serve multiple groups. @@ -384,15 +391,27 @@ int UavcanNode::run() } } - // Check arming state + // Check motor test state bool updated = false; + orb_check(_test_motor_sub, &updated); + + if (updated) { + orb_copy(ORB_ID(test_motor), _test_motor_sub, &_test_motor); + + // Update the test status and check that we're not locked down + _test_in_progress = (_test_motor.value > 0); + _esc_controller.arm_single_esc(_test_motor.motor_number, _test_in_progress); + } + + // Check arming state orb_check(_armed_sub, &updated); if (updated) { orb_copy(ORB_ID(actuator_armed), _armed_sub, &_armed); - // Update the armed status and check that we're not locked down - bool set_armed = _armed.armed && !_armed.lockdown; + // Update the armed status and check that we're not locked down and motor + // test is not running + bool set_armed = _armed.armed && !_armed.lockdown && !_test_in_progress; arm_actuators(set_armed); } @@ -429,7 +448,7 @@ int UavcanNode::arm_actuators(bool arm) { _is_armed = arm; - _esc_controller.arm_esc(arm); + _esc_controller.arm_all_escs(arm); return OK; } diff --git a/src/modules/uavcan/uavcan_main.hpp b/src/modules/uavcan/uavcan_main.hpp index be7db9741..274321f0d 100644 --- a/src/modules/uavcan/uavcan_main.hpp +++ b/src/modules/uavcan/uavcan_main.hpp @@ -41,6 +41,7 @@ #include <uORB/topics/actuator_controls.h> #include <uORB/topics/actuator_outputs.h> #include <uORB/topics/actuator_armed.h> +#include <uORB/topics/test_motor.h> #include "actuators/esc.hpp" #include "sensors/sensor_bridge.hpp" @@ -103,6 +104,10 @@ private: actuator_armed_s _armed; ///< the arming request of the system bool _is_armed = false; ///< the arming status of the actuators on the bus + int _test_motor_sub = -1; ///< uORB subscription of the test_motor status + test_motor_s _test_motor; + bool _test_in_progress = false; + unsigned _output_count = 0; ///< number of actuators currently available static UavcanNode *_instance; ///< singleton pointer diff --git a/src/systemcmds/motor_test/module.mk b/src/systemcmds/motor_test/module.mk new file mode 100644 index 000000000..261428ef9 --- /dev/null +++ b/src/systemcmds/motor_test/module.mk @@ -0,0 +1,43 @@ +############################################################################ +# +# Copyright (c) 2014 PX4 Development Team. All rights reserved. +# +# Redistribution and use in source and binary forms, with or without +# modification, are permitted provided that the following conditions +# are met: +# +# 1. Redistributions of source code must retain the above copyright +# notice, this list of conditions and the following disclaimer. +# 2. Redistributions in binary form must reproduce the above copyright +# notice, this list of conditions and the following disclaimer in +# the documentation and/or other materials provided with the +# distribution. +# 3. Neither the name PX4 nor the names of its contributors may be +# used to endorse or promote products derived from this software +# without specific prior written permission. +# +# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS +# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT +# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS +# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE +# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, +# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, +# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS +# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED +# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT +# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN +# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE +# POSSIBILITY OF SUCH DAMAGE. +# +############################################################################ + +# +# Build the motor_test tool. +# + +MODULE_COMMAND = motor_test +SRCS = motor_test.c + +MODULE_STACKSIZE = 4096 + +MAXOPTIMIZATION = -Os diff --git a/src/systemcmds/motor_test/motor_test.c b/src/systemcmds/motor_test/motor_test.c new file mode 100644 index 000000000..1b7ff75f7 --- /dev/null +++ b/src/systemcmds/motor_test/motor_test.c @@ -0,0 +1,131 @@ +/**************************************************************************** + * + * Copyright (C) 2014 PX4 Development Team. All rights reserved. + * Author: Holger Steinhaus <hsteinhaus@gmx.de> + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * 3. Neither the name PX4 nor the names of its contributors may be + * used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS + * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE + * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, + * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS + * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED + * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN + * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************/ + +/** + * @file motor_test.c + * + * Tool for drive testing + */ + +#include <nuttx/config.h> + +#include <stdio.h> +#include <stdlib.h> +#include <string.h> +#include <unistd.h> + +#include <arch/board/board.h> +#include <drivers/drv_hrt.h> +#include <uORB/topics/test_motor.h> + + +#include "systemlib/systemlib.h" +#include "systemlib/err.h" + + +__EXPORT int motor_test_main(int argc, char *argv[]); + +static void motor_test(unsigned channel, float value); +static void usage(const char *reason); + +void motor_test(unsigned channel, float value) +{ + orb_advert_t _test_motor_pub; + struct test_motor_s _test_motor; + + _test_motor.motor_number = channel; + _test_motor.timestamp = hrt_absolute_time(); + _test_motor.value = value; + + if (_test_motor_pub > 0) { + /* publish test state */ + orb_publish(ORB_ID(test_motor), _test_motor_pub, &_test_motor); + } else { + /* advertise and publish */ + _test_motor_pub = orb_advertise(ORB_ID(test_motor), &_test_motor); + } +} + +static void usage(const char *reason) +{ + if (reason != NULL) { + warnx("%s", reason); + } + + errx(1, + "usage:\n" + "motor_test\n" + " -m <channel> Motor to test (0..7)\n" + " -p <power> Power (0..100)\n"); +} + +int motor_test_main(int argc, char *argv[]) +{ + unsigned long channel = 0; + unsigned long lval; + float value = 0.0f; + int ch; + + if (argc != 5) { + usage("please specify motor and power"); + } + + while ((ch = getopt(argc, argv, "m:p:")) != EOF) { + switch (ch) { + + case 'm': + /* Read in motor number */ + channel = strtoul(optarg, NULL, 0); + break; + + case 'p': + /* Read in power value */ + lval = strtoul(optarg, NULL, 0); + + if (lval > 100) + usage("value invalid"); + + value = ((float)lval)/100.f; + break; + default: + usage(NULL); + } + } + + motor_test(channel, value); + + printf("motor %d set to %.2f\n", channel, (double)value); + + exit(0); +} diff --git a/src/systemcmds/nshterm/module.mk b/src/systemcmds/nshterm/module.mk index 7d2c59f91..a12bc369e 100644 --- a/src/systemcmds/nshterm/module.mk +++ b/src/systemcmds/nshterm/module.mk @@ -38,6 +38,8 @@ MODULE_COMMAND = nshterm SRCS = nshterm.c -MODULE_STACKSIZE = 1400 +MODULE_STACKSIZE = 1600 MAXOPTIMIZATION = -Os + +MODULE_PRIORITY = "SCHED_PRIORITY_DEFAULT-30" diff --git a/src/systemcmds/nshterm/nshterm.c b/src/systemcmds/nshterm/nshterm.c index fca1798e6..edeb5c624 100644 --- a/src/systemcmds/nshterm/nshterm.c +++ b/src/systemcmds/nshterm/nshterm.c @@ -51,6 +51,8 @@ #include <fcntl.h> #include <systemlib/err.h> +#include <uORB/topics/actuator_armed.h> + __EXPORT int nshterm_main(int argc, char *argv[]); int @@ -62,9 +64,30 @@ nshterm_main(int argc, char *argv[]) } unsigned retries = 0; int fd = -1; + int armed_fd = orb_subscribe(ORB_ID(actuator_armed)); + struct actuator_armed_s armed; + /* we assume the system does not provide arming status feedback */ + bool armed_updated = false; + + /* try the first 30 seconds or if arming system is ready */ + while ((retries < 300) || armed_updated) { + + /* abort if an arming topic is published and system is armed */ + bool updated = false; + if (orb_check(armed_fd, &updated)) { + /* the system is now providing arming status feedback. + * instead of timing out, we resort to abort bringing + * up the terminal. + */ + armed_updated = true; + orb_copy(ORB_ID(actuator_armed), armed_fd, &armed); + + if (armed.armed) { + /* this is not an error, but we are done */ + exit(0); + } + } - /* try the first 30 seconds */ - while (retries < 300) { /* the retries are to cope with the behaviour of /dev/ttyACM0 */ /* which may not be ready immediately. */ fd = open(argv[1], O_RDWR); @@ -87,7 +110,7 @@ nshterm_main(int argc, char *argv[]) /* Back up the original uart configuration to restore it after exit */ if ((termios_state = tcgetattr(fd, &uart_config)) < 0) { - warnx("ERROR get termios config %s: %d\n", argv[1], termios_state); + warnx("ERR get config %s: %d\n", argv[1], termios_state); close(fd); return -1; } @@ -96,7 +119,7 @@ nshterm_main(int argc, char *argv[]) uart_config.c_oflag |= (ONLCR | OPOST/* | OCRNL*/); if ((termios_state = tcsetattr(fd, TCSANOW, &uart_config)) < 0) { - warnx("ERROR setting baudrate / termios config for %s (tcsetattr)\n", argv[1]); + warnx("ERR set config %s\n", argv[1]); close(fd); return -1; } diff --git a/src/systemcmds/pwm/pwm.c b/src/systemcmds/pwm/pwm.c index 478c2a772..eeba89fa8 100644 --- a/src/systemcmds/pwm/pwm.c +++ b/src/systemcmds/pwm/pwm.c @@ -74,34 +74,34 @@ usage(const char *reason) "usage:\n" "pwm arm|disarm|rate|failsafe|disarmed|min|max|test|info ...\n" "\n" - " arm Arm output\n" - " disarm Disarm output\n" + "arm\t\t\t\tArm output\n" + "disarm\t\t\t\tDisarm output\n" "\n" - " rate ... Configure PWM rates\n" - " [-g <channel group>] Channel group that should update at the alternate rate\n" - " [-m <chanmask> ] Directly supply channel mask\n" - " [-a] Configure all outputs\n" - " -r <alt_rate> PWM rate (50 to 400 Hz)\n" + "rate ...\t\t\tConfigure PWM rates\n" + "\t[-g <channel group>]\t(e.g. 0,1,2)\n" + "\t[-m <channel mask> ]\t(e.g. 0xF)\n" + "\t[-a]\t\t\tConfigure all outputs\n" + "\t-r <alt_rate>\t\tPWM rate (50 to 400 Hz)\n" "\n" - " failsafe ... Configure failsafe PWM values\n" - " disarmed ... Configure disarmed PWM values\n" - " min ... Configure minimum PWM values\n" - " max ... Configure maximum PWM values\n" - " [-c <channels>] Supply channels (e.g. 1234)\n" - " [-m <chanmask> ] Directly supply channel mask (e.g. 0xF)\n" - " [-a] Configure all outputs\n" - " -p <pwm value> PWM value\n" + "failsafe ...\t\t\tFailsafe PWM\n" + "disarmed ...\t\t\tDisarmed PWM\n" + "min ...\t\t\t\tMinimum PWM\n" + "max ...\t\t\t\tMaximum PWM\n" + "\t[-c <channels>]\t\t(e.g. 1234)\n" + "\t[-m <channel mask> ]\t(e.g. 0xF)\n" + "\t[-a]\t\t\tConfigure all outputs\n" + "\t-p <pwm value>\t\tPWM value\n" "\n" - " test ... Directly set PWM values\n" - " [-c <channels>] Supply channels (e.g. 1234)\n" - " [-m <chanmask> ] Directly supply channel mask (e.g. 0xF)\n" - " [-a] Configure all outputs\n" - " -p <pwm value> PWM value\n" + "test ...\t\t\tDirectly set PWM\n" + "\t[-c <channels>]\t\t(e.g. 1234)\n" + "\t[-m <channel mask> ]\t(e.g. 0xF)\n" + "\t[-a]\t\t\tConfigure all outputs\n" + "\t-p <pwm value>\t\tPWM value\n" "\n" - " info Print information about the PWM device\n" + "info\t\t\t\tPrint information\n" "\n" - " -v Print verbose information\n" - " -d <device> PWM output device (defaults to " PWM_OUTPUT_DEVICE_PATH ")\n" + "\t-v\t\t\tVerbose\n" + "\t-d <dev>\t\t(default " PWM_OUTPUT_DEVICE_PATH ")\n" ); } @@ -123,7 +123,7 @@ pwm_main(int argc, char *argv[]) unsigned single_ch = 0; unsigned pwm_value = 0; - if (argc < 1) + if (argc < 2) usage(NULL); while ((ch = getopt(argc-1, &argv[1], "d:vc:g:m:ap:r:")) != EOF) { @@ -165,7 +165,7 @@ pwm_main(int argc, char *argv[]) /* Read in mask directly */ set_mask = strtoul(optarg, &ep, 0); if (*ep != '\0') - usage("bad set_mask value"); + usage("BAD set_mask VAL"); break; case 'a': @@ -176,12 +176,12 @@ pwm_main(int argc, char *argv[]) case 'p': pwm_value = strtoul(optarg, &ep, 0); if (*ep != '\0') - usage("bad PWM value provided"); + usage("BAD PWM VAL"); break; case 'r': alt_rate = strtoul(optarg, &ep, 0); if (*ep != '\0') - usage("bad alternative rate provided"); + usage("BAD rate VAL"); break; default: break; @@ -189,7 +189,7 @@ pwm_main(int argc, char *argv[]) } if (print_verbose && set_mask > 0) { - warnx("Chose channels: "); + warnx("Channels: "); printf(" "); for (unsigned i = 0; i<PWM_OUTPUT_MAX_CHANNELS; i++) { if (set_mask & 1<<i) @@ -364,7 +364,7 @@ pwm_main(int argc, char *argv[]) usage("no channels set"); } if (pwm_value == 0) - usage("no PWM value provided"); + usage("no PWM provided"); struct pwm_output_values pwm_values = {.values = {0}, .channel_count = 0}; @@ -383,7 +383,7 @@ pwm_main(int argc, char *argv[]) ret = ioctl(fd, PWM_SERVO_SET_FAILSAFE_PWM, (long unsigned int)&pwm_values); if (ret != OK) - errx(ret, "failed setting failsafe values"); + errx(ret, "BAD input VAL"); } exit(0); @@ -393,7 +393,7 @@ pwm_main(int argc, char *argv[]) usage("no channels set"); } if (pwm_value == 0) - usage("no PWM value provided"); + usage("no PWM provided"); /* get current servo values */ struct pwm_output_values last_spos; @@ -487,7 +487,7 @@ pwm_main(int argc, char *argv[]) steps_timing_index < sizeof(steps_timings_us) / sizeof(steps_timings_us[0]); steps_timing_index++ ) { - warnx("Sending step input with 0 to 100%% over a %u microseconds ramp", steps_timings_us[steps_timing_index]); + warnx("Step input (0 to 100%%) over %u us ramp", steps_timings_us[steps_timing_index]); while (1) { for (unsigned i = 0; i < servo_count; i++) { @@ -526,7 +526,7 @@ pwm_main(int argc, char *argv[]) err(1, "PWM_SERVO_SET(%d)", i); } } - warnx("Key pressed, user abort\n"); + warnx("User abort\n"); exit(0); } } @@ -675,7 +675,7 @@ pwm_main(int argc, char *argv[]) exit(0); } - usage("specify arm|disarm|rate|failsafe\n\t\tdisarmed|min|max|test|info|forcefail|terminatefail"); + usage(NULL); return 0; } diff --git a/src/systemcmds/tests/tests_main.c b/src/systemcmds/tests/tests_main.c index e3f26924f..0f56704e6 100644 --- a/src/systemcmds/tests/tests_main.c +++ b/src/systemcmds/tests/tests_main.c @@ -110,7 +110,9 @@ const struct { {"conv", test_conv, OPT_NOJIGTEST | OPT_NOALLTEST}, {"mount", test_mount, OPT_NOJIGTEST | OPT_NOALLTEST}, {"mtd", test_mtd, 0}, +#ifndef TESTS_MATHLIB_DISABLE {"mathlib", test_mathlib, 0}, +#endif {"help", test_help, OPT_NOALLTEST | OPT_NOHELP | OPT_NOJIGTEST}, {NULL, NULL, 0} }; diff --git a/src/systemcmds/ver/ver.c b/src/systemcmds/ver/ver.c index 9ae080ee2..2ead3e632 100644 --- a/src/systemcmds/ver/ver.c +++ b/src/systemcmds/ver/ver.c @@ -44,14 +44,16 @@ #include <string.h> #include <version/version.h> #include <systemlib/err.h> +#include <systemlib/mcu_version.h> -// string constants for version commands +/* string constants for version commands */ static const char sz_ver_hw_str[] = "hw"; static const char sz_ver_hwcmp_str[] = "hwcmp"; static const char sz_ver_git_str[] = "git"; static const char sz_ver_bdate_str[] = "bdate"; static const char sz_ver_gcc_str[] = "gcc"; static const char sz_ver_all_str[] = "all"; +static const char mcu_ver_str[] = "mcu"; static void usage(const char *reason) { @@ -59,55 +61,87 @@ static void usage(const char *reason) printf("%s\n", reason); } - printf("usage: ver {hw|hwcmp|git|bdate|gcc|all}\n\n"); + printf("usage: ver {hw|hwcmp|git|bdate|gcc|all|mcu}\n\n"); } __EXPORT int ver_main(int argc, char *argv[]); int ver_main(int argc, char *argv[]) { - int ret = 1; //defaults to an error + /* defaults to an error */ + int ret = 1; - // first check if there are at least 2 params + /* first check if there are at least 2 params */ if (argc >= 2) { if (argv[1] != NULL) { - if (!strncmp(argv[1], sz_ver_hw_str, sizeof(sz_ver_hw_str))) { - printf("%s\n", HW_ARCH); - ret = 0; - } else if (!strncmp(argv[1], sz_ver_hwcmp_str, sizeof(sz_ver_hwcmp_str))) { + if (!strncmp(argv[1], sz_ver_hwcmp_str, sizeof(sz_ver_hwcmp_str))) { if (argc >= 3 && argv[2] != NULL) { - // compare 3rd parameter with HW_ARCH string, in case of match, return 0 + /* compare 3rd parameter with HW_ARCH string, in case of match, return 0 */ ret = strncmp(HW_ARCH, argv[2], strlen(HW_ARCH)); if (ret == 0) { printf("ver hwcmp match: %s\n", HW_ARCH); } + return ret; } else { errx(1, "Not enough arguments, try 'ver hwcmp PX4FMU_V2'"); } + } - } else if (!strncmp(argv[1], sz_ver_git_str, sizeof(sz_ver_git_str))) { - printf("%s\n", FW_GIT); - ret = 0; + /* check if we want to show all */ + bool show_all = !strncmp(argv[1], sz_ver_all_str, sizeof(sz_ver_all_str)); - } else if (!strncmp(argv[1], sz_ver_bdate_str, sizeof(sz_ver_bdate_str))) { - printf("%s %s\n", __DATE__, __TIME__); + if (show_all || !strncmp(argv[1], sz_ver_hw_str, sizeof(sz_ver_hw_str))) { + printf("HW arch: %s\n", HW_ARCH); ret = 0; - } else if (!strncmp(argv[1], sz_ver_gcc_str, sizeof(sz_ver_gcc_str))) { - printf("%s\n", __VERSION__); + } + + if (show_all || !strncmp(argv[1], sz_ver_git_str, sizeof(sz_ver_git_str))) { + printf("FW git-hash: %s\n", FW_GIT); ret = 0; - } else if (!strncmp(argv[1], sz_ver_all_str, sizeof(sz_ver_all_str))) { - printf("HW arch: %s\n", HW_ARCH); + } + + if (show_all || !strncmp(argv[1], sz_ver_bdate_str, sizeof(sz_ver_bdate_str))) { printf("Build datetime: %s %s\n", __DATE__, __TIME__); - printf("FW git-hash: %s\n", FW_GIT); - printf("GCC toolchain: %s\n", __VERSION__); ret = 0; - } else { + } + + if (show_all || !strncmp(argv[1], sz_ver_gcc_str, sizeof(sz_ver_gcc_str))) { + printf("Toolchain: %s\n", __VERSION__); + ret = 0; + + } + + if (show_all || !strncmp(argv[1], mcu_ver_str, sizeof(mcu_ver_str))) { + + char rev; + char* revstr; + + int chip_version = mcu_version(&rev, &revstr); + + if (chip_version < 0) { + printf("UNKNOWN MCU\n"); + + } else { + printf("MCU: %s, rev. %c\n", revstr, rev); + + if (chip_version < MCU_REV_STM32F4_REV_3) { + printf("\nWARNING WARNING WARNING!\n" + "Revision %c has a silicon errata\n" + "This device can only utilize a maximum of 1MB flash safely!\n" + "http://px4.io/help/errata\n\n", rev); + } + } + + ret = 0; + } + + if (ret == 1) { errx(1, "unknown command.\n"); } |