diff options
-rw-r--r-- | src/drivers/px4io/px4io.cpp | 141 |
1 files changed, 90 insertions, 51 deletions
diff --git a/src/drivers/px4io/px4io.cpp b/src/drivers/px4io/px4io.cpp index 960ac06ff..c561ea83a 100644 --- a/src/drivers/px4io/px4io.cpp +++ b/src/drivers/px4io/px4io.cpp @@ -89,21 +89,61 @@ #define PX4IO_SET_DEBUG _IOC(0xff00, 0) #define PX4IO_INAIR_RESTART_ENABLE _IOC(0xff00, 1) +/** + * The PX4IO class. + * + * Encapsulates PX4FMU to PX4IO communications modeled as file operations. + */ class PX4IO : public device::I2C { public: + /** + * Constructor. + * + * Initialize all class variables. + */ PX4IO(); + /** + * Destructor. + * + * Wait for worker thread to terminate. + */ virtual ~PX4IO(); + /** + * Initialize the PX4IO class. + * + * Initialize the physical I2C interface to PX4IO. Retrieve relevant initial system parameters. Initialize PX4IO registers. + */ virtual int init(); + /** + * IO Control handler. + * + * Handle all IOCTL calls to the PX4IO file descriptor. + * + * @param[in] filp file handle (not used). This function is always called directly through object reference + * @param[in] cmd the IOCTL command + * @param[in] the IOCTL command parameter (optional) + */ virtual int ioctl(file *filp, int cmd, unsigned long arg); + + /** + * write handler. + * + * Handle writes to the PX4IO file descriptor. + * + * @param[in] filp file handle (not used). This function is always called directly through object reference + * @param[in] buffer pointer to the data buffer to be written + * @param[in] len size in bytes to be written + * @return number of bytes written + */ virtual ssize_t write(file *filp, const char *buffer, size_t len); /** * Set the update rate for actuator outputs from FMU to IO. * - * @param rate The rate in Hz actuator outpus are sent to IO. + * @param[in] rate The rate in Hz actuator output are sent to IO. * Min 10 Hz, max 400 Hz */ int set_update_rate(int rate); @@ -111,29 +151,41 @@ public: /** * Set the battery current scaling and bias * - * @param amp_per_volt - * @param amp_bias + * @param[in] amp_per_volt + * @param[in] amp_bias */ void set_battery_current_scaling(float amp_per_volt, float amp_bias); /** * Push failsafe values to IO. * - * @param vals Failsafe control inputs: in us PPM (900 for zero, 1500 for centered, 2100 for full) - * @param len Number of channels, could up to 8 + * @param[in] vals Failsafe control inputs: in us PPM (900 for zero, 1500 for centered, 2100 for full) + * @param[in] len Number of channels, could up to 8 */ int set_failsafe_values(const uint16_t *vals, unsigned len); /** - * Print the current status of IO - */ + * Print IO status. + * + * Print all relevant IO status information + */ void print_status(); + /** + * Set the DSM VCC is controlled by relay one flag + * + * @param[in] enable true=DSM satellite VCC is controlled by relay1, false=DSM satellite VCC not controlled + */ inline void set_dsm_vcc_ctl(bool enable) { _dsm_vcc_ctl = enable; }; + /** + * Get the DSM VCC is controlled by relay one flag + * + * @return true=DSM satellite VCC is controlled by relay1, false=DSM satellite VCC not controlled + */ inline bool get_dsm_vcc_ctl() { return _dsm_vcc_ctl; @@ -141,58 +193,48 @@ public: private: // XXX - unsigned _max_actuators; - unsigned _max_controls; - unsigned _max_rc_input; - unsigned _max_relays; - unsigned _max_transfer; + unsigned _max_actuators; ///<Maximum # of actuators supported by PX4IO + unsigned _max_controls; ///<Maximum # of controls supported by PX4IO + unsigned _max_rc_input; ///<Maximum receiver channels supported by PX4IO + unsigned _max_relays; ///<Maximum relays supported by PX4IO + unsigned _max_transfer; ///<Maximum number of I2C transfers supported by PX4IO - unsigned _update_interval; ///< subscription interval limiting send rate + unsigned _update_interval; ///<Subscription interval limiting send rate - volatile int _task; ///< worker task - volatile bool _task_should_exit; + volatile int _task; ///<worker task id + volatile bool _task_should_exit; ///<worker terminate flag - int _mavlink_fd; + int _mavlink_fd; ///<mavlink file descriptor - perf_counter_t _perf_update; + perf_counter_t _perf_update; ///<local performance counter /* cached IO state */ - uint16_t _status; - uint16_t _alarms; + uint16_t _status; ///<Various IO status flags + uint16_t _alarms; ///<Various IO alarms /* subscribed topics */ - int _t_actuators; ///< actuator controls topic - int _t_armed; ///< system armed control topic - int _t_vstatus; ///< system / vehicle status - int _t_param; ///< parameter update topic + int _t_actuators; ///<actuator controls topic + int _t_armed; ///<system armed control topic + int _t_vstatus; ///<system / vehicle status + int _t_param; ///<parameter update topic /* advertised topics */ - orb_advert_t _to_input_rc; ///< rc inputs from io - orb_advert_t _to_actuators_effective; ///< effective actuator controls topic - orb_advert_t _to_outputs; ///< mixed servo outputs topic - orb_advert_t _to_battery; ///< battery status / voltage + orb_advert_t _to_input_rc; ///<rc inputs from IO topic + orb_advert_t _to_actuators_effective; ///<effective actuator controls topic + orb_advert_t _to_outputs; ///<mixed servo outputs topic + orb_advert_t _to_battery; ///<battery status / voltage topic - actuator_outputs_s _outputs; ///< mixed outputs - actuator_controls_effective_s _controls_effective; ///< effective controls + actuator_outputs_s _outputs; ///<mixed outputs + actuator_controls_effective_s _controls_effective; ///<effective controls - bool _primary_pwm_device; ///< true if we are the default PWM output + bool _primary_pwm_device; ///<true if we are the default PWM output - float _battery_amp_per_volt; - float _battery_amp_bias; - float _battery_mamphour_total; - uint64_t _battery_last_timestamp; + float _battery_amp_per_volt; ///<current sensor amps/volt + float _battery_amp_bias; ///<current sensor bias + float _battery_mamphour_total;///<amp hours consumed so far + uint64_t _battery_last_timestamp;///<last amp hour calculation timestamp - /** - * Relay1 is dedicated to controlling DSM receiver power - */ - - bool _dsm_vcc_ctl; - - /** - * System armed - */ - - bool _system_armed; + bool _dsm_vcc_ctl; ///<true if relay 1 controls DSM satellite RX power /** * Trampoline to the worker task @@ -361,8 +403,7 @@ PX4IO::PX4IO() : _battery_amp_bias(0), _battery_mamphour_total(0), _battery_last_timestamp(0), - _dsm_vcc_ctl(false), - _system_armed(false) + _dsm_vcc_ctl(false) { /* we need this potentially before it could be set in task_main */ g_dev = this; @@ -687,7 +728,7 @@ PX4IO::task_main() // See if bind parameter has been set, and reset it to 0 param_get(dsm_bind_param = param_find("RC_DSM_BIND"), &dsm_bind_val); if (dsm_bind_val) { - if (!_system_armed) { + if (!(_status & PX4IO_P_STATUS_FLAGS_ARMED)) { if ((dsm_bind_val == 1) || (dsm_bind_val == 2)) { mavlink_log_info(mavlink_fd, "[IO] binding dsm%c rx", dsm_bind_val == 1 ? '2' : 'x'); ioctl(nullptr, DSM_BIND_START, dsm_bind_val == 1 ? 3 : 7); @@ -765,8 +806,6 @@ PX4IO::io_set_arming_state() uint16_t set = 0; uint16_t clear = 0; - _system_armed = vstatus.flag_system_armed; - if (armed.armed && !armed.lockdown) { set |= PX4IO_P_SETUP_ARMING_FMU_ARMED; } else { @@ -1628,7 +1667,7 @@ PX4IO::ioctl(file * /*filep*/, int cmd, unsigned long arg) } ssize_t -PX4IO::write(file *filp, const char *buffer, size_t len) +PX4IO::write(file */*filp*/, const char *buffer, size_t len) { unsigned count = len / 2; |