diff options
Diffstat (limited to 'apps/ardrone_control/rate_control.c')
-rw-r--r-- | apps/ardrone_control/rate_control.c | 320 |
1 files changed, 320 insertions, 0 deletions
diff --git a/apps/ardrone_control/rate_control.c b/apps/ardrone_control/rate_control.c new file mode 100644 index 000000000..4abba6255 --- /dev/null +++ b/apps/ardrone_control/rate_control.c @@ -0,0 +1,320 @@ +/**************************************************************************** + * + * Copyright (C) 2008-2012 PX4 Development Team. All rights reserved. + * Author: Tobias Naegeli <nagelit@student.ethz.ch> + * Lorenz Meier <lm@inf.ethz.ch> + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * 3. Neither the name PX4 nor the names of its contributors may be + * used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS + * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE + * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, + * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS + * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED + * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN + * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************/ + +/* + * @file Implementation of attitude rate control + */ + +#include "rate_control.h" +#include "ardrone_control_helper.h" +#include "ardrone_motor_control.h" +#include <arch/board/up_hrt.h> + +extern int ardrone_write; +extern int gpios; + +typedef struct { + uint16_t motor_front_nw; ///< Front motor in + configuration, front left motor in x configuration + uint16_t motor_right_ne; ///< Right motor in + configuration, front right motor in x configuration + uint16_t motor_back_se; ///< Back motor in + configuration, back right motor in x configuration + uint16_t motor_left_sw; ///< Left motor in + configuration, back left motor in x configuration + uint8_t target_system; ///< System ID of the system that should set these motor commands +} quad_motors_setpoint_t; + + +void control_rates(struct sensor_combined_s *raw, struct ardrone_motors_setpoint_s *setpoints) +{ + static quad_motors_setpoint_t actuators_desired; + //static quad_motors_setpoint_t quad_motors_setpoint_desired; + + static int16_t outputBand = 0; + +// static uint16_t control_counter; + static hrt_abstime now_time; + static hrt_abstime last_time; + + static float setpointXrate; + static float setpointYrate; + static float setpointZrate; + + static float setpointRateCast[3]; + static float Kp; +// static float Ki; + static float setpointThrustCast; + static float startpointFullControll; + static float maxThrustSetpoints; + + static float gyro_filtered[3]; + static float gyro_filtered_offset[3]; + static float gyro_alpha; + static float gyro_alpha_offset; +// static float errXrate; + static float attRatesScaled[3]; + + static uint16_t offsetCnt; +// static float antiwindup; + static int motor_skip_counter; + + static int read_ret; + + static bool initialized; + + if (initialized == false) { + initialized = true; + + /* Read sensors for initial values */ + + gyro_filtered_offset[0] = 0.00026631611f * (float)raw->gyro_raw[0]; + gyro_filtered_offset[1] = 0.00026631611f * (float)raw->gyro_raw[1]; + gyro_filtered_offset[2] = 0.00026631611f * (float)raw->gyro_raw[2]; + + gyro_filtered[0] = 0.00026631611f * (float)raw->gyro_raw[0]; + gyro_filtered[1] = 0.00026631611f * (float)raw->gyro_raw[1]; + gyro_filtered[2] = 0.00026631611f * (float)raw->gyro_raw[2]; + + outputBand = 0; + startpointFullControll = 150.0f; + maxThrustSetpoints = 511.0f; + //Kp=60; + //Kp=40.0f; + //Kp=45; + Kp = 30.0f; +// Ki=0.0f; +// antiwindup=50.0f; + } + + /* Get setpoint */ + + + //Rate Controller + setpointRateCast[0] = -((float)setpoints->motor_right_ne - 9999.0f) * 0.01f / 180.0f * 3.141f; + setpointRateCast[1] = -((float)setpoints->motor_front_nw - 9999.0f) * 0.01f / 180.0f * 3.141f; + setpointRateCast[2] = 0; //-((float)setpoints->motor_back_se-9999.0f)*0.01f; + //Ki=actuatorDesired.motorRight_NE*0.001f; + setpointThrustCast = setpoints->motor_left_sw; + + attRatesScaled[0] = 0.000317603994f * (float)raw->gyro_raw[0]; + attRatesScaled[1] = 0.000317603994f * (float)raw->gyro_raw[1]; + attRatesScaled[2] = 0.000317603994f * (float)raw->gyro_raw[2]; + + //filtering of the gyroscope values + + //compute filter coefficient alpha + + //gyro_alpha=0.005/(2.0f*3.1415f*200.0f+0.005f); + //gyro_alpha=0.009; + gyro_alpha = 0.09f; + gyro_alpha_offset = 0.001f; + //gyro_alpha=0.001; + //offset estimation and filtering + offsetCnt++; + uint8_t i; + + for (i = 0; i < 3; i++) { + if (offsetCnt < 5000) { + gyro_filtered_offset[i] = attRatesScaled[i] * gyro_alpha_offset + gyro_filtered_offset[i] * (1 - gyro_alpha_offset); + } + + gyro_filtered[i] = 1.0f * ((attRatesScaled[i] - gyro_filtered_offset[i]) * gyro_alpha + gyro_filtered[i] * (1 - gyro_alpha)) - 0 * setpointRateCast[i]; + } + + // //START DEBUG + // /* write filtered values to global_data_attitude */ + // global_data_attitude->rollspeed = gyro_filtered[0]; + // global_data_attitude->pitchspeed = gyro_filtered[1]; + // global_data_attitude->yawspeed = gyro_filtered[2]; + // //END DEBUG + + //rate controller + + //X-axis + setpointXrate = -Kp * (setpointRateCast[0] - gyro_filtered[0]); + //Y-axis + setpointYrate = -Kp * (setpointRateCast[1] - gyro_filtered[1]); + //Z-axis + setpointZrate = -Kp * (setpointRateCast[2] - gyro_filtered[2]); + + + + + //Mixing + if (setpointThrustCast <= 0) { + setpointThrustCast = 0; + outputBand = 0; + } + + if ((setpointThrustCast < startpointFullControll) && (setpointThrustCast > 0)) { + outputBand = 0.75f * setpointThrustCast; + } + + if ((setpointThrustCast >= startpointFullControll) && (setpointThrustCast < maxThrustSetpoints - 0.75f * startpointFullControll)) { + outputBand = 0.75f * startpointFullControll; + } + + if (setpointThrustCast >= maxThrustSetpoints - 0.75f * startpointFullControll) { + setpointThrustCast = 0.75f * startpointFullControll; + outputBand = 0.75f * startpointFullControll; + } + + actuators_desired.motor_front_nw = setpointThrustCast + (setpointXrate + setpointYrate + setpointZrate); + actuators_desired.motor_right_ne = setpointThrustCast + (-setpointXrate + setpointYrate - setpointZrate); + actuators_desired.motor_back_se = setpointThrustCast + (-setpointXrate - setpointYrate + setpointZrate); + actuators_desired.motor_left_sw = setpointThrustCast + (setpointXrate - setpointYrate - setpointZrate); + + + if ((setpointThrustCast + setpointXrate + setpointYrate + setpointZrate) > (setpointThrustCast + outputBand)) { + actuators_desired.motor_front_nw = setpointThrustCast + outputBand; + } + + if ((setpointThrustCast + setpointXrate + setpointYrate + setpointZrate) < (setpointThrustCast - outputBand)) { + actuators_desired.motor_front_nw = setpointThrustCast - outputBand; + } + + if ((setpointThrustCast + (-setpointXrate) + setpointYrate - setpointZrate) > (setpointThrustCast + outputBand)) { + actuators_desired.motor_right_ne = setpointThrustCast + outputBand; + } + + if ((setpointThrustCast + (-setpointXrate) + setpointYrate - setpointZrate) < (setpointThrustCast - outputBand)) { + actuators_desired.motor_right_ne = setpointThrustCast - outputBand; + } + + if ((setpointThrustCast + (-setpointXrate) + (-setpointYrate) + setpointZrate) > (setpointThrustCast + outputBand)) { + actuators_desired.motor_back_se = setpointThrustCast + outputBand; + } + + if ((setpointThrustCast + (-setpointXrate) + (-setpointYrate) + setpointZrate) < (setpointThrustCast - outputBand)) { + actuators_desired.motor_back_se = setpointThrustCast - outputBand; + } + + if ((setpointThrustCast + setpointXrate + (-setpointYrate) - setpointZrate) > (setpointThrustCast + outputBand)) { + actuators_desired.motor_left_sw = setpointThrustCast + outputBand; + } + + if ((setpointThrustCast + setpointXrate + (-setpointYrate) - setpointZrate) < (setpointThrustCast - outputBand)) { + actuators_desired.motor_left_sw = setpointThrustCast - outputBand; + } + + //printf("%lu,%lu,%lu,%lu\n",actuators_desired.motor_front_nw, actuators_desired.motor_right_ne, actuators_desired.motor_back_se, actuators_desired.motor_left_sw); + + if (motor_skip_counter % 5 == 0) { + uint8_t motorSpeedBuf[5]; + ar_get_motor_packet(motorSpeedBuf, actuators_desired.motor_front_nw, actuators_desired.motor_right_ne, actuators_desired.motor_back_se, actuators_desired.motor_left_sw); +// uint8_t* motorSpeedBuf = ar_get_motor_packet(1, 1, 1, 1); +// if(motor_skip_counter %50 == 0) +// { +// if(0==actuators_desired.motor_front_nw || 0 == actuators_desired.motor_right_ne || 0 == actuators_desired.motor_back_se || 0 == actuators_desired.motor_left_sw) +// printf("Motors set: %u, %u, %u, %u\n", actuators_desired.motor_front_nw, actuators_desired.motor_right_ne, actuators_desired.motor_back_se, actuators_desired.motor_left_sw); +// printf("input: %u\n", setpoints->motor_front_nw); +// printf("Roll casted desired: %f, Pitch casted desired: %f, Yaw casted desired: %f\n", setpointRateCast[0], setpointRateCast[1], setpointRateCast[2]); +// } + write(ardrone_write, motorSpeedBuf, 5); +// motor_skip_counter = 0; + } + + motor_skip_counter++; + + //START DEBUG +// global_data_lock(&global_data_ardrone_control->access_conf); +// global_data_ardrone_control->timestamp = hrt_absolute_time(); +// global_data_ardrone_control->gyro_scaled[0] = attRatesScaled[0]; +// global_data_ardrone_control->gyro_scaled[1] = attRatesScaled[1]; +// global_data_ardrone_control->gyro_scaled[2] = attRatesScaled[2]; +// global_data_ardrone_control->gyro_filtered[0] = gyro_filtered[0]; +// global_data_ardrone_control->gyro_filtered[1] = gyro_filtered[1]; +// global_data_ardrone_control->gyro_filtered[2] = gyro_filtered[2]; +// global_data_ardrone_control->gyro_filtered_offset[0] = gyro_filtered_offset[0]; +// global_data_ardrone_control->gyro_filtered_offset[1] = gyro_filtered_offset[1]; +// global_data_ardrone_control->gyro_filtered_offset[2] = gyro_filtered_offset[2]; +// global_data_ardrone_control->setpoint_rate_cast[0] = setpointRateCast[0]; +// global_data_ardrone_control->setpoint_rate_cast[1] = setpointRateCast[1]; +// global_data_ardrone_control->setpoint_rate_cast[2] = setpointRateCast[2]; +// global_data_ardrone_control->setpoint_thrust_cast = setpointThrustCast; +// global_data_ardrone_control->setpoint_rate[0] = setpointXrate; +// global_data_ardrone_control->setpoint_rate[1] = setpointYrate; +// global_data_ardrone_control->setpoint_rate[2] = setpointZrate; +// global_data_ardrone_control->motor_front_nw = actuators_desired.motor_front_nw; +// global_data_ardrone_control->motor_right_ne = actuators_desired.motor_right_ne; +// global_data_ardrone_control->motor_back_se = actuators_desired.motor_back_se; +// global_data_ardrone_control->motor_left_sw = actuators_desired.motor_left_sw; +// global_data_unlock(&global_data_ardrone_control->access_conf); +// global_data_broadcast(&global_data_ardrone_control->access_conf); + //END DEBUG + + + +// gettimeofday(&tv, NULL); +// now = ((uint32_t)tv.tv_sec) * 1000 + tv.tv_usec/1000; +// time_elapsed = now - last_run; +// if (time_elapsed*1000 > CONTROL_LOOP_USLEEP) +// { +// sleep_time = (int32_t)CONTROL_LOOP_USLEEP - ((int32_t)time_elapsed*1000 - (int32_t)CONTROL_LOOP_USLEEP); +// +// if(motor_skip_counter %500 == 0) +// { +// printf("Desired: %u, New usleep: %i, Time elapsed: %u, Now: %u, Last run: %u\n",(uint32_t)CONTROL_LOOP_USLEEP, sleep_time, time_elapsed*1000, now, last_run); +// } +// } +// +// if (sleep_time <= 0) +// { +// printf("WARNING: CPU Overload!\n"); +// printf("Desired: %u, New usleep: %i, Time elapsed: %u, Now: %u, Last run: %u\n",(uint32_t)CONTROL_LOOP_USLEEP, sleep_time, time_elapsed*1000, now, last_run); +// usleep(CONTROL_LOOP_USLEEP); +// } +// else +// { +// usleep(sleep_time); +// } +// last_run = now; +// +// now_time = hrt_absolute_time(); +// if(control_counter % 500 == 0) +// { +// printf("Now: %lu\n",(unsigned long)now_time); +// printf("Last: %lu\n",(unsigned long)last_time); +// printf("Difference: %lu\n", (unsigned long)(now_time - last_time)); +// printf("now seconds: %lu\n", (unsigned long)(now_time / 1000000)); +// } +// last_time = now_time; +// +// now_time = hrt_absolute_time() / 1000000; +// if(now_time - last_time > 0) +// { +// printf("Counter: %ld\n",control_counter); +// last_time = now_time; +// control_counter = 0; +// } +// control_counter++; +} |