diff options
Diffstat (limited to 'nuttx/arch/arm/Kconfig')
| -rw-r--r-- | nuttx/arch/arm/Kconfig | 206 |
1 files changed, 206 insertions, 0 deletions
diff --git a/nuttx/arch/arm/Kconfig b/nuttx/arch/arm/Kconfig new file mode 100644 index 000000000..40dcb1105 --- /dev/null +++ b/nuttx/arch/arm/Kconfig @@ -0,0 +1,206 @@ +# +# For a description of the syntax of this configuration file, +# see misc/tools/kconfig-language.txt. +# + +if ARCH_ARM +choice + prompt "ARM chip selection" + default ARCH_CHIP_STM32 + +config ARCH_CHIP_C5471 + bool "TMS320 C5471" + ---help--- + TI TMS320 C5471, A180, or DA180 (ARM7TDMI) + +config ARCH_CHIP_CALYPSO + bool "Calypso" + ---help--- + TI Calypso-based cell phones (ARM7TDMI) + +config ARCH_CHIP_DM320 + bool "TMS320 DM320" + ---help--- + TI DMS320 DM320 (ARM926EJS) + +config ARCH_CHIP_IMX + bool "Freescale iMX" + ---help--- + Freescale iMX architectures (ARM920T) + +config ARCH_CHIP_KINETIS + bool "Freescale Kinetis" + ---help--- + Freescale Kinetis Architectures (ARM Cortex-M4) + +config ARCH_CHIP_LM3S + bool "TI Stellaris" + ---help--- + TI Stellaris LMS3 architecutres (ARM Cortex-M3) + +config ARCH_CHIP_LPC17XX + bool "NXP LPC17xx" + ---help--- + NXP LPC17xx architectures (ARM Cortex-M3) + +config ARCH_CHIP_LPC214X + bool "NXP LPC214x" + ---help--- + NXP LPC2145x architectures (ARM7TDMI) + +config ARCH_CHIP_LPC2378 + bool "NXP LPC2378" + ---help--- + NXP LPC2145x architectures (ARM7TDMI) + +config ARCH_CHIP_LPC31XX + bool "NXP LPC31XX" + ---help--- + NPX LPC31XX architectures (ARM926EJS). + +config ARCH_CHIP_LPC43XX + bool "NXP LPC43XX" + ---help--- + NPX LPC43XX architectures (ARM Cortex-M4). + +config ARCH_CHIP_SAM3U + bool "Atmel AT91SAM3U" + ---help--- + Atmel AT91SAM3U architectures (ARM Cortex-M3) + +config ARCH_CHIP_STM32 + bool "STMicro STM32" + ---help--- + STMicro STM32 architectures (ARM Cortex-M3/4). + +config ARCH_CHIP_STR71X + bool "STMicro STR71x" + ---help--- + STMicro STR71x architectures (ARM7TDMI). + +endchoice + +config ARCH_ARM7TDMI + bool + default y if ARCH_CHIP_C5471 || ARCH_CHIP_CALYPSO || ARCH_CHIP_LPC214X || ARCH_CHIP_LPC2378 || ARCH_CHIP_STR71X + +config ARCH_ARM926EJS + bool + default y if ARCH_CHIP_DM320 || ARCH_CHIP_LPC31XX + +config ARCH_ARM920T + bool + default y if ARCH_CHIP_IMX + +config ARCH_CORTEXM + bool + default y if ARCH_CHIP_KINETIS || ARCH_CHIP_LM3S || ARCH_CHIP_LPC17XX || ARCH_CHIP_LPC43XX || ARCH_CHIP_SAM3U || ARCH_CHIP_STM32 + +config ARCH_FAMILY + string + default "arm" if ARCH_ARM7TDMI || ARCH_ARM926EJS || ARCH_ARM920T + default "armv7-m" if ARCH_CORTEXM + +config ARCH_CHIP + string + default "c5471" if ARCH_CHIP_C5471 + default "calypso" if ARCH_CHIP_CALYPSO + default "dm320" if ARCH_CHIP_DM320 + default "imx" if ARCH_CHIP_IMX + default "kinetis" if ARCH_CHIP_KINETIS + default "lm3s" if ARCH_CHIP_LM3S + default "lpc17x" if ARCH_CHIP_LPC17XX + default "lpc214x" if ARCH_CHIP_LPC214X + default "lpc2378" if ARCH_CHIP_LPC2378 + default "lpc31xx" if ARCH_CHIP_LPC31XX + default "lpc43xx" if ARCH_CHIP_LPC43XX + default "sam3u" if ARCH_CHIP_SAM3U + default "stm32" if ARCH_CHIP_STM32 + default "str71x" if ARCH_CHIP_STR71X + +config ARCH_STACKDUMP + bool "Dump stack on assertions" + default n + ---help--- + Enable to do stack dumps after assertions + +config ARCH_LEDS + bool "Use board LEDs to show state" + default y + ---help--- + Use LEDs to show state. Unique to boards that have LEDs + +config ARCH_INTERRUPTSTACK + bool "Use interrupt stack" + default y + ---help--- + This architecture supports an interrupt stack. If defined, this symbol + is the size of the interrupt stack in bytes. If not defined, the user + task stacks will be used during interrupt handling. + +config ARCH_IRQPRIO + bool "Interrupt priority" + default y if ARCH_CORTEXM + ---help--- + Select if your board supports interrupt prioritization. + +config ARCH_LOOPSPERMSEC + int "Delay loops per millisecond" + default 5000 + ---help--- + Delay loops nust be calibrated for correct operation. + +config ARCH_CALIBRATION + bool "Calibrate delay loop" + default n + ---help--- + Enables some built in instrumentation that causes a 100 second delay + during boot-up. This 100 second delay serves no purpose other than it + allows you to calibratre ARCH_LOOPSPERMSEC. You simply use a stop + watch to measure the 100 second delay then adjust ARCH_LOOPSPERMSEC until + the delay actually is 100 seconds. + +if ARCH_CHIP_C5471 +source arch/arm/src/c5471/Kconfig +endif +if ARCH_CHIP_CALYPSO +source arch/arm/src/calypso/Kconfig +endif +if ARCH_CHIP_DM320 +source arch/arm/src/dm320/Kconfig +endif +if ARCH_CHIP_IMX +source arch/arm/src/imx/Kconfig +endif +if ARCH_CHIP_KINETIS +source arch/arm/src/kinetis/Kconfig +endif +if ARCH_CHIP_LM3S +source arch/arm/src/lm3s/Kconfig +endif +if ARCH_CHIP_LPC17XX +source arch/arm/src/lpc17xx/Kconfig +endif +if ARCH_CHIP_LPC214X +source arch/arm/src/lpc214x/Kconfig +endif +if ARCH_CHIP_LPC2378 +source arch/arm/src/lpc2378/Kconfig +endif +if ARCH_CHIP_LPC31XX +source arch/arm/src/lpc31xx/Kconfig +endif +if ARCH_CHIP_LPC43XX +source arch/arm/src/lpc43xx/Kconfig +endif +if ARCH_CHIP_SAM3U +source arch/arm/src/sam3u/Kconfig +endif +if ARCH_CHIP_STM32 +source arch/arm/src/stm32/Kconfig +endif +if ARCH_CHIP_STR71X +source arch/arm/src/str71x/Kconfig +endif + +endif |