diff options
Diffstat (limited to 'nuttx/arch/arm/src/armv7-m/up_assert.c')
-rw-r--r-- | nuttx/arch/arm/src/armv7-m/up_assert.c | 334 |
1 files changed, 334 insertions, 0 deletions
diff --git a/nuttx/arch/arm/src/armv7-m/up_assert.c b/nuttx/arch/arm/src/armv7-m/up_assert.c new file mode 100644 index 000000000..77fd0b596 --- /dev/null +++ b/nuttx/arch/arm/src/armv7-m/up_assert.c @@ -0,0 +1,334 @@ +/**************************************************************************** + * arch/arm/src/armv7-m/up_assert.c + * + * Copyright (C) 2009-2010 Gregory Nutt. All rights reserved. + * Author: Gregory Nutt <spudmonkey@racsa.co.cr> + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * 3. Neither the name NuttX nor the names of its contributors may be + * used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS + * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE + * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, + * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS + * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED + * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN + * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************/ + +/**************************************************************************** + * Included Files + ****************************************************************************/ + +#include <nuttx/config.h> + +#include <stdint.h> +#include <stdlib.h> +#include <assert.h> +#include <debug.h> + +#include <nuttx/irq.h> +#include <nuttx/arch.h> +#include <arch/board/board.h> + +#include "up_arch.h" +#include "os_internal.h" +#include "up_internal.h" + +/**************************************************************************** + * Pre-processor Definitions + ****************************************************************************/ + +/* Output debug info if stack dump is selected -- even if + * debug is not selected. + */ + +#ifdef CONFIG_ARCH_STACKDUMP +# undef lldbg +# define lldbg lib_lowprintf +#endif + +/* The following is just intended to keep some ugliness out of the mainline + * code. We are going to print the task name if: + * + * CONFIG_TASK_NAME_SIZE > 0 && <-- The task has a name + * (defined(CONFIG_DEBUG) || <-- And the debug is enabled (lldbg used) + * defined(CONFIG_ARCH_STACKDUMP) <-- Or lib_lowprintf() is used + */ + +#undef CONFIG_PRINT_TASKNAME +#if CONFIG_TASK_NAME_SIZE > 0 && (defined(CONFIG_DEBUG) || defined(CONFIG_ARCH_STACKDUMP)) +# define CONFIG_PRINT_TASKNAME 1 +#endif + +/**************************************************************************** + * Private Data + ****************************************************************************/ + +/**************************************************************************** + * Private Functions + ****************************************************************************/ + +/**************************************************************************** + * Name: up_getsp + ****************************************************************************/ + +/* I don't know if the builtin to get SP is enabled */ + +static inline uint32_t up_getsp(void) +{ + uint32_t sp; + __asm__ + ( + "\tmov %0, sp\n\t" + : "=r"(sp) + ); + return sp; +} + +/**************************************************************************** + * Name: up_stackdump + ****************************************************************************/ + +#ifdef CONFIG_ARCH_STACKDUMP +static void up_stackdump(uint32_t sp, uint32_t stack_base) +{ + uint32_t stack ; + + for (stack = sp & ~0x1f; stack < stack_base; stack += 32) + { + uint32_t *ptr = (uint32_t*)stack; + lldbg("%08x: %08x %08x %08x %08x %08x %08x %08x %08x\n", + stack, ptr[0], ptr[1], ptr[2], ptr[3], + ptr[4], ptr[5], ptr[6], ptr[7]); + } +} +#else +# define up_stackdump() +#endif + +/**************************************************************************** + * Name: up_registerdump + ****************************************************************************/ + +#ifdef CONFIG_ARCH_STACKDUMP +static inline void up_registerdump(void) +{ + /* Are user registers available from interrupt processing? */ + + if (current_regs) + { + /* Yes.. dump the interrupt registers */ + + lldbg("R0: %08x %08x %08x %08x %08x %08x %08x %08x\n", + current_regs[REG_R0], current_regs[REG_R1], + current_regs[REG_R2], current_regs[REG_R3], + current_regs[REG_R4], current_regs[REG_R5], + current_regs[REG_R6], current_regs[REG_R7]); + lldbg("R8: %08x %08x %08x %08x %08x %08x %08x %08x\n", + current_regs[REG_R8], current_regs[REG_R9], + current_regs[REG_R10], current_regs[REG_R11], + current_regs[REG_R12], current_regs[REG_R13], + current_regs[REG_R14], current_regs[REG_R15]); + lldbg("xPSR: %08x PRIMASK: %08x\n", + current_regs[REG_XPSR], current_regs[REG_PRIMASK]); + } +} +#else +# define up_registerdump() +#endif + +/**************************************************************************** + * Name: up_dumpstate + ****************************************************************************/ + +#ifdef CONFIG_ARCH_STACKDUMP +static void up_dumpstate(void) +{ + _TCB *rtcb = (_TCB*)g_readytorun.head; + uint32_t sp = up_getsp(); + uint32_t ustackbase; + uint32_t ustacksize; +#if CONFIG_ARCH_INTERRUPTSTACK > 3 + uint32_t istackbase; + uint32_t istacksize; +#endif + + /* Get the limits on the user stack memory */ + + if (rtcb->pid == 0) + { + ustackbase = g_heapbase - 4; + ustacksize = CONFIG_IDLETHREAD_STACKSIZE; + } + else + { + ustackbase = (uint32_t)rtcb->adj_stack_ptr; + ustacksize = (uint32_t)rtcb->adj_stack_size; + } + + /* Get the limits on the interrupt stack memory */ + +#if CONFIG_ARCH_INTERRUPTSTACK > 3 + istackbase = (uint32_t)&g_intstackbase; + istacksize = (CONFIG_ARCH_INTERRUPTSTACK & ~3) - 4; + + /* Show interrupt stack info */ + + lldbg("sp: %08x\n", sp); + lldbg("IRQ stack:\n"); + lldbg(" base: %08x\n", istackbase); + lldbg(" size: %08x\n", istacksize); + + /* Does the current stack pointer lie within the interrupt + * stack? + */ + + if (sp <= istackbase && sp > istackbase - istacksize) + { + /* Yes.. dump the interrupt stack */ + + up_stackdump(sp, istackbase); + } + + /* Extract the user stack pointer if we are in an interrupt handler. + * If we are not in an interrupt handler. Then sp is the user stack + * pointer (and the above range check should have failed). + */ + + if (current_regs) + { + sp = current_regs[REG_R13]; + lldbg("sp: %08x\n", sp); + } + + lldbg("User stack:\n"); + lldbg(" base: %08x\n", ustackbase); + lldbg(" size: %08x\n", ustacksize); + + /* Dump the user stack if the stack pointer lies within the allocated user + * stack memory. + */ + + if (sp <= ustackbase && sp > ustackbase - ustacksize) + { + up_stackdump(sp, ustackbase); + } +#else + lldbg("sp: %08x\n", sp); + lldbg("stack base: %08x\n", ustackbase); + lldbg("stack size: %08x\n", ustacksize); + + /* Dump the user stack if the stack pointer lies within the allocated user + * stack memory. + */ + + if (sp > ustackbase || sp <= ustackbase - ustacksize) + { + lldbg("ERROR: Stack pointer is not within allocated stack\n"); + } + else + { + up_stackdump(sp, ustackbase); + } +#endif + + /* Then dump the registers (if available) */ + + up_registerdump(); +} +#else +# define up_dumpstate() +#endif + +/**************************************************************************** + * Name: _up_assert + ****************************************************************************/ + +static void _up_assert(int errorcode) /* __attribute__ ((noreturn)) */ +{ + /* Are we in an interrupt handler or the idle task? */ + + if (current_regs || ((_TCB*)g_readytorun.head)->pid == 0) + { + (void)irqsave(); + for(;;) + { +#ifdef CONFIG_ARCH_LEDS + up_ledon(LED_PANIC); + up_mdelay(250); + up_ledoff(LED_PANIC); + up_mdelay(250); +#endif + } + } + else + { + exit(errorcode); + } +} + +/**************************************************************************** + * Public Functions + ****************************************************************************/ + +/**************************************************************************** + * Name: up_assert + ****************************************************************************/ + +void up_assert(const uint8_t *filename, int lineno) +{ +#ifdef CONFIG_PRINT_TASKNAME + _TCB *rtcb = (_TCB*)g_readytorun.head; +#endif + + up_ledon(LED_ASSERTION); +#ifdef CONFIG_PRINT_TASKNAME + lldbg("Assertion failed at file:%s line: %d task: %s\n", + filename, lineno, rtcb->name); +#else + lldbg("Assertion failed at file:%s line: %d\n", + filename, lineno); +#endif + up_dumpstate(); + _up_assert(EXIT_FAILURE); +} + +/**************************************************************************** + * Name: up_assert_code + ****************************************************************************/ + +void up_assert_code(const uint8_t *filename, int lineno, int errorcode) +{ +#ifdef CONFIG_PRINT_TASKNAME + _TCB *rtcb = (_TCB*)g_readytorun.head; +#endif + + up_ledon(LED_ASSERTION); +#ifdef CONFIG_PRINT_TASKNAME + lldbg("Assertion failed at file:%s line: %d task: %s error code: %d\n", + filename, lineno, rtcb->name, errorcode); +#else + lldbg("Assertion failed at file:%s line: %d error code: %d\n", + filename, lineno, errorcode); +#endif + up_dumpstate(); + _up_assert(errorcode); +} |