diff options
Diffstat (limited to 'nuttx/arch/arm/src/stm32/chip/stm32_can.h')
-rw-r--r-- | nuttx/arch/arm/src/stm32/chip/stm32_can.h | 505 |
1 files changed, 505 insertions, 0 deletions
diff --git a/nuttx/arch/arm/src/stm32/chip/stm32_can.h b/nuttx/arch/arm/src/stm32/chip/stm32_can.h new file mode 100644 index 000000000..253bf68fc --- /dev/null +++ b/nuttx/arch/arm/src/stm32/chip/stm32_can.h @@ -0,0 +1,505 @@ +/************************************************************************************ + * arch/arm/src/stm32/chip/stm32_can.h + * + * Copyright (C) 2009, 2011 Gregory Nutt. All rights reserved. + * Author: Gregory Nutt <gnutt@nuttx.org> + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * 3. Neither the name NuttX nor the names of its contributors may be + * used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS + * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE + * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, + * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS + * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED + * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN + * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + * + ************************************************************************************/ + +#ifndef __ARCH_ARM_SRC_STM32_CHIP_STM32_CAN_H +#define __ARCH_ARM_SRC_STM32_CHIP_STM32_CAN_H + +/************************************************************************************ + * Included Files + ************************************************************************************/ + +#include <nuttx/config.h> + +#include "chip.h" + +/************************************************************************************ + * Pre-processor Definitions + ************************************************************************************/ + +/* 3 TX mailboxes */ + +#define CAN_TXMBOX1 0 +#define CAN_TXMBOX2 1 +#define CAN_TXMBOX3 2 + +/* 2 RX mailboxes */ + +#define CAN_RXMBOX1 0 +#define CAN_RXMBOX2 1 + +/* Number of filters depends on silicon */ + +#if defined(CONFIG_STM32_CONNECTIVITYLINE) || defined(CONFIG_STM32_STM32F20XX) || defined(CONFIG_STM32_STM32F40XX) +# define CAN_NFILTERS 28 +#else +# define CAN_NFILTERS 14 +#endif + +/* Register Offsets *****************************************************************/ + +/* CAN control and status registers */ + +#define STM32_CAN_MCR_OFFSET 0x0000 /* CAN master control register */ +#define STM32_CAN_MSR_OFFSET 0x0004 /* CAN master status register */ +#define STM32_CAN_TSR_OFFSET 0x0008 /* CAN transmit status register */ +#define STM32_CAN_RF0R_OFFSET 0x000c /* CAN receive FIFO 0 register */ +#define STM32_CAN_RF1R_OFFSET 0x0010 /* CAN receive FIFO 1 register */ +#define STM32_CAN_IER_OFFSET 0x0014 /* CAN interrupt enable register */ +#define STM32_CAN_ESR_OFFSET 0x0018 /* CAN error status register */ +#define STM32_CAN_BTR_OFFSET 0x001c /* CAN bit timing register */ + +/* CAN mailbox registers (3 TX and 2 RX) */ + +#define STM32_CAN_TIR_OFFSET(m) (0x0180+((m)<<4)) +#define STM32_CAN_TI0R_OFFSET 0x0180 /* TX mailbox identifier register 0 */ +#define STM32_CAN_TI1R_OFFSET 0x0190 /* TX mailbox identifier register 1 */ +#define STM32_CAN_TI2R_OFFSET 0x01a0 /* TX mailbox identifier register 2 */ + +#define STM32_CAN_TDTR_OFFSET(m) (0x0184+((m)<<4)) +#define STM32_CAN_TDT0R_OFFSET 0x0184 /* Mailbox data length control and time stamp register 0 */ +#define STM32_CAN_TDT1R_OFFSET 0x0194 /* Mailbox data length control and time stamp register 1 */ +#define STM32_CAN_TDT2R_OFFSET 0x01a4 /* Mailbox data length control and time stamp register 2 */ + +#define STM32_CAN_TDLR_OFFSET(m) (0x0188+((m)<<4)) +#define STM32_CAN_TDL0R_OFFSET 0x0188 /* Mailbox data low register 0 */ +#define STM32_CAN_TDL1R_OFFSET 0x0198 /* Mailbox data low register 1 */ +#define STM32_CAN_TDL2R_OFFSET 0x01a8 /* Mailbox data low register 2 */ + +#define STM32_CAN_TDHR_OFFSET(m) (0x018c+((m)<<4)) +#define STM32_CAN_TDH0R_OFFSET 0x018c /* Mailbox data high register 0 */ +#define STM32_CAN_TDH1R_OFFSET 0x019c /* Mailbox data high register 1 */ +#define STM32_CAN_TDH2R_OFFSET 0x01ac /* Mailbox data high register 2 */ + +#define STM32_CAN_RIR_OFFSET(m) (0x01b0+((m)<<4)) +#define STM32_CAN_RI0R_OFFSET 0x01b0 /* Rx FIFO mailbox identifier register 0 */ +#define STM32_CAN_RI1R_OFFSET 0x01c0 /* Rx FIFO mailbox identifier register 1 */ + +#define STM32_CAN_RDTR_OFFSET(m) (0x01b4+((m)<<4)) +#define STM32_CAN_RDT0R_OFFSET 0x01b4 /* Rx FIFO mailbox data length control and time stamp register 0 */ +#define STM32_CAN_RDT1R_OFFSET 0x01c4 /* Rx FIFO mailbox data length control and time stamp register 1 */ + +#define STM32_CAN_RDLR_OFFSET(m) (0x01b8+((m)<<4)) +#define STM32_CAN_RDL0R_OFFSET 0x01b8 /* Receive FIFO mailbox data low register 0 */ +#define STM32_CAN_RDL1R_OFFSET 0x01c8 /* Receive FIFO mailbox data low register 1 */ + +#define STM32_CAN_RDHR_OFFSET(m) (0x01bc+((m)<<4)) +#define STM32_CAN_RDH0R_OFFSET 0x01bc /* Receive FIFO mailbox data high register 0 */ +#define STM32_CAN_RDH1R_OFFSET 0x01cc /* Receive FIFO mailbox data high register 1 */ + +/* CAN filter registers */ + +#define STM32_CAN_FMR_OFFSET 0x0200 /* CAN filter master register */ +#define STM32_CAN_FM1R_OFFSET 0x0204 /* CAN filter mode register */ +#define STM32_CAN_FS1R_OFFSET 0x020c /* CAN filter scale register */ +#define STM32_CAN_FFA1R_OFFSET 0x0214 /* CAN filter FIFO assignment register */ +#define STM32_CAN_FA1R_OFFSET 0x021c /* CAN filter activation register */ + +/* There are 14 or 28 filter banks (depending) on the device. Each filter bank is + * composed of two 32-bit registers, CAN_FiR: + * F0R1 Offset 0x240 + * F0R2 Offset 0x244 + * F1R1 Offset 0x248 + * F1R2 Offset 0x24c + * ... + */ + +#define STM32_CAN_FR_OFFSET(f,i) (0x240+((f)<<3)+(((i)-1)<<2)) + +/* Register Addresses ***************************************************************/ + +#if STM32_NCAN > 0 +# define STM32_CAN1_MCR (STM32_CAN1_BASE+STM32_CAN_MCR_OFFSET) +# define STM32_CAN1_MSR (STM32_CAN1_BASE+STM32_CAN_MSR_OFFSET) +# define STM32_CAN1_TSR (STM32_CAN1_BASE+STM32_CAN_TSR_OFFSET) +# define STM32_CAN1_RF0R (STM32_CAN1_BASE+STM32_CAN_RF0R_OFFSET) +# define STM32_CAN1_RF1R (STM32_CAN1_BASE+STM32_CAN_RF1R_OFFSET) +# define STM32_CAN1_IER (STM32_CAN1_BASE+STM32_CAN_IER_OFFSET) +# define STM32_CAN1_ESR (STM32_CAN1_BASE+STM32_CAN_ESR_OFFSET) +# define STM32_CAN1_BTR (STM32_CAN1_BASE+STM32_CAN_BTR_OFFSET) + +# define STM32_CAN1_TIR(m) (STM32_CAN1_BASE+STM32_CAN_TIR_OFFSET(m)) +# define STM32_CAN1_TI0R (STM32_CAN1_BASE+STM32_CAN_TI0R_OFFSET) +# define STM32_CAN1_TI1R (STM32_CAN1_BASE+STM32_CAN_TI1R_OFFSET) +# define STM32_CAN1_TI2R (STM32_CAN1_BASE+STM32_CAN_TI2R_OFFSET) + +# define STM32_CAN1_TDTR(m) (STM32_CAN1_BASE+STM32_CAN_TDTR_OFFSET(m)) +# define STM32_CAN1_TDT0R (STM32_CAN1_BASE+STM32_CAN_TDT0R_OFFSET) +# define STM32_CAN1_TDT1R (STM32_CAN1_BASE+STM32_CAN_TDT1R_OFFSET) +# define STM32_CAN1_TDT2R (STM32_CAN1_BASE+STM32_CAN_TDT2R_OFFSET) + +# define STM32_CAN1_TDLR(m) (STM32_CAN1_BASE+STM32_CAN_TDLR_OFFSET(m)) +# define STM32_CAN1_TDL0R (STM32_CAN1_BASE+STM32_CAN_TDL0R_OFFSET) +# define STM32_CAN1_TDL1R (STM32_CAN1_BASE+STM32_CAN_TDL1R_OFFSET) +# define STM32_CAN1_TDL2R (STM32_CAN1_BASE+STM32_CAN_TDL2R_OFFSET) + +# define STM32_CAN1_TDHR(m) (STM32_CAN1_BASE+STM32_CAN_TDHR_OFFSET(m)) +# define STM32_CAN1_TDH0R (STM32_CAN1_BASE+STM32_CAN_TDH0R_OFFSET) +# define STM32_CAN1_TDH1R (STM32_CAN1_BASE+STM32_CAN_TDH1R_OFFSET) +# define STM32_CAN1_TDH2R (STM32_CAN1_BASE+STM32_CAN_TDH2R_OFFSET) + +# define STM32_CAN1_RIR(m) (STM32_CAN1_BASE+STM32_CAN_RIR_OFFSET(m)) +# define STM32_CAN1_RI0R (STM32_CAN1_BASE+STM32_CAN_RI0R_OFFSET) +# define STM32_CAN1_RI1R (STM32_CAN1_BASE+STM32_CAN_RI1R_OFFSET) + +# define STM32_CAN1_RDTR(m) (STM32_CAN1_BASE+STM32_CAN_RDTR_OFFSET(m)) +# define STM32_CAN1_RDT0R (STM32_CAN1_BASE+STM32_CAN_RDT0R_OFFSET) +# define STM32_CAN1_RDT1R (STM32_CAN1_BASE+STM32_CAN_RDT1R_OFFSET) + +# define STM32_CAN1_RDLR(m) (STM32_CAN1_BASE+STM32_CAN_RDLR_OFFSET(m)) +# define STM32_CAN1_RDL0R (STM32_CAN1_BASE+STM32_CAN_RDL0R_OFFSET) +# define STM32_CAN1_RDL1R (STM32_CAN1_BASE+STM32_CAN_RDL1R_OFFSET) + +# define STM32_CAN1_RDHR(m) (STM32_CAN1_BASE+STM32_CAN_RDHR_OFFSET(m)) +# define STM32_CAN1_RDH0R (STM32_CAN1_BASE+STM32_CAN_RDH0R_OFFSET) +# define STM32_CAN1_RDH1R (STM32_CAN1_BASE+STM32_CAN_RDH1R_OFFSET) + +# define STM32_CAN1_FMR (STM32_CAN1_BASE+STM32_CAN_FMR_OFFSET) +# define STM32_CAN1_FM1R (STM32_CAN1_BASE+STM32_CAN_FM1R_OFFSET) +# define STM32_CAN1_FS1R (STM32_CAN1_BASE+STM32_CAN_FS1R_OFFSET) +# define STM32_CAN1_FFA1R (STM32_CAN1_BASE+STM32_CAN_FFA1R_OFFSET) +# define STM32_CAN1_FA1R (STM32_CAN1_BASE+STM32_CAN_FA1R_OFFSET) +# define STM32_CAN1_FIR(b,i) (STM32_CAN1_BASE+STM32_CAN_FIR_OFFSET(b,i)) +#endif + +#if STM32_NCAN > 1 +# define STM32_CAN2_MCR (STM32_CAN2_BASE+STM32_CAN_MCR_OFFSET) +# define STM32_CAN2_MSR (STM32_CAN2_BASE+STM32_CAN_MSR_OFFSET) +# define STM32_CAN2_TSR (STM32_CAN2_BASE+STM32_CAN_TSR_OFFSET) +# define STM32_CAN2_RF0R (STM32_CAN2_BASE+STM32_CAN_RF0R_OFFSET) +# define STM32_CAN2_RF1R (STM32_CAN2_BASE+STM32_CAN_RF1R_OFFSET) +# define STM32_CAN2_IER (STM32_CAN2_BASE+STM32_CAN_IER_OFFSET) +# define STM32_CAN2_ESR (STM32_CAN2_BASE+STM32_CAN_ESR_OFFSET) +# define STM32_CAN2_BTR (STM32_CAN2_BASE+STM32_CAN_BTR_OFFSET) + +# define STM32_CAN2_TIR(m) (STM32_CAN2_BASE+STM32_CAN_TIR_OFFSET(m)) +# define STM32_CAN2_TI0R (STM32_CAN2_BASE+STM32_CAN_TI0R_OFFSET) +# define STM32_CAN2_TI1R (STM32_CAN2_BASE+STM32_CAN_TI1R_OFFSET) +# define STM32_CAN2_TI2R (STM32_CAN2_BASE+STM32_CAN_TI2R_OFFSET) + +# define STM32_CAN2_TDTR(m) (STM32_CAN2_BASE+STM32_CAN_TDTR_OFFSET(m)) +# define STM32_CAN2_TDT0R (STM32_CAN2_BASE+STM32_CAN_TDT0R_OFFSET) +# define STM32_CAN2_TDT1R (STM32_CAN2_BASE+STM32_CAN_TDT1R_OFFSET) +# define STM32_CAN2_TDT2R (STM32_CAN2_BASE+STM32_CAN_TDT2R_OFFSET) + +# define STM32_CAN2_TDLR(m) (STM32_CAN2_BASE+STM32_CAN_TDLR_OFFSET(m)) +# define STM32_CAN2_TDL0R (STM32_CAN2_BASE+STM32_CAN_TDL0R_OFFSET) +# define STM32_CAN2_TDL1R (STM32_CAN2_BASE+STM32_CAN_TDL1R_OFFSET) +# define STM32_CAN2_TDL2R (STM32_CAN2_BASE+STM32_CAN_TDL2R_OFFSET) + +# define STM32_CAN2_TDHR(m) (STM32_CAN2_BASE+STM32_CAN_TDHR_OFFSET(m)) +# define STM32_CAN2_TDH0R (STM32_CAN2_BASE+STM32_CAN_TDH0R_OFFSET) +# define STM32_CAN2_TDH1R (STM32_CAN2_BASE+STM32_CAN_TDH1R_OFFSET) +# define STM32_CAN2_TDH2R (STM32_CAN2_BASE+STM32_CAN_TDH2R_OFFSET) + +# define STM32_CAN2_RIR(m) (STM32_CAN2_BASE+STM32_CAN_RIR_OFFSET(m)) +# define STM32_CAN2_RI0R (STM32_CAN2_BASE+STM32_CAN_RI0R_OFFSET) +# define STM32_CAN2_RI1R (STM32_CAN2_BASE+STM32_CAN_RI1R_OFFSET) + +# define STM32_CAN2_RDTR(m) (STM32_CAN2_BASE+STM32_CAN_RDTR_OFFSET(m)) +# define STM32_CAN2_RDT0R (STM32_CAN2_BASE+STM32_CAN_RDT0R_OFFSET) +# define STM32_CAN2_RDT1R (STM32_CAN2_BASE+STM32_CAN_RDT1R_OFFSET) + +# define STM32_CAN2_RDLR(m) (STM32_CAN2_BASE+STM32_CAN_RDLR_OFFSET(m)) +# define STM32_CAN2_RDL0R (STM32_CAN2_BASE+STM32_CAN_RDL0R_OFFSET) +# define STM32_CAN2_RDL1R (STM32_CAN2_BASE+STM32_CAN_RDL1R_OFFSET) + +# define STM32_CAN2_RDHR(m) (STM32_CAN2_BASE+STM32_CAN_RDHR_OFFSET(m)) +# define STM32_CAN2_RDH0R (STM32_CAN2_BASE+STM32_CAN_RDH0R_OFFSET) +# define STM32_CAN2_RDH1R (STM32_CAN2_BASE+STM32_CAN_RDH1R_OFFSET) + +# define STM32_CAN2_FMR (STM32_CAN2_BASE+STM32_CAN_FMR_OFFSET) +# define STM32_CAN2_FM1R (STM32_CAN2_BASE+STM32_CAN_FM1R_OFFSET) +# define STM32_CAN2_FS1R (STM32_CAN2_BASE+STM32_CAN_FS1R_OFFSET) +# define STM32_CAN2_FFA1R (STM32_CAN2_BASE+STM32_CAN_FFA1R_OFFSET) +# define STM32_CAN2_FA1R (STM32_CAN2_BASE+STM32_CAN_FA1R_OFFSET) +# define STM32_CAN2_FIR(b,i) (STM32_CAN2_BASE+STM32_CAN_FIR_OFFSET(b,i)) +#endif + +/* Register Bitfield Definitions ****************************************************/ + +/* CAN master control register */ + +#define CAN_MCR_INRQ (1 << 0) /* Bit 0: Initialization Request */ +#define CAN_MCR_SLEEP (1 << 1) /* Bit 1: Sleep Mode Request */ +#define CAN_MCR_TXFP (1 << 2) /* Bit 2: Transmit FIFO Priority */ +#define CAN_MCR_RFLM (1 << 3) /* Bit 3: Receive FIFO Locked Mode */ +#define CAN_MCR_NART (1 << 4) /* Bit 4: No Automatic Retransmission */ +#define CAN_MCR_AWUM (1 << 5) /* Bit 5: Automatic Wakeup Mode */ +#define CAN_MCR_ABOM (1 << 6) /* Bit 6: Automatic Bus-Off Management */ +#define CAN_MCR_TTCM (1 << 7) /* Bit 7: Time Triggered Communication Mode Enable */ +#define CAN_MCR_RESET (1 << 15) /* Bit 15: bxCAN software master reset */ +#define CAN_MCR_DBF (1 << 16) /* Bit 16: Debug freeze */ + +/* CAN master status register */ + +#define CAN_MSR_INAK (1 << 0) /* Bit 0: Initialization Acknowledge */ +#define CAN_MSR_SLAK (1 << 1) /* Bit 1: Sleep Acknowledge */ +#define CAN_MSR_ERRI (1 << 2) /* Bit 2: Error Interrupt */ +#define CAN_MSR_WKUI (1 << 3) /* Bit 3: Wakeup Interrupt */ +#define CAN_MSR_SLAKI (1 << 4) /* Bit 4: Sleep acknowledge interrupt */ +#define CAN_MSR_TXM (1 << 8) /* Bit 8: Transmit Mode */ +#define CAN_MSR_RXM (1 << 9) /* Bit 9: Receive Mode */ +#define CAN_MSR_SAMP (1 << 20) /* Bit 10: Last Sample Point */ +#define CAN_MSR_RX (1 << 11) /* Bit 11: CAN Rx Signal */ + +/* CAN transmit status register */ + +#define CAN_TSR_RQCP0 (1 << 0) /* Bit 0: Request Completed Mailbox 0 */ +#define CAN_TSR_TXOK0 (1 << 1) /* Bit 1 : Transmission OK of Mailbox 0 */ +#define CAN_TSR_ALST0 (1 << 2) /* Bit 2 : Arbitration Lost for Mailbox 0 */ +#define CAN_TSR_TERR0 (1 << 3) /* Bit 3 : Transmission Error of Mailbox 0 */ +#define CAN_TSR_ABRQ0 (1 << 7) /* Bit 7 : Abort Request for Mailbox 0 */ +#define CAN_TSR_RQCP1 (1 << 8) /* Bit 8 : Request Completed Mailbox 1 */ +#define CAN_TSR_TXOK1 (1 << 9) /* Bit 9 : Transmission OK of Mailbox 1 */ +#define CAN_TSR_ALST1 (1 << 10) /* Bit 10 : Arbitration Lost for Mailbox 1 */ +#define CAN_TSR_TERR1 (1 << 11) /* Bit 11 : Transmission Error of Mailbox 1 */ +#define CAN_TSR_ABRQ1 (1 << 15) /* Bit 15 : Abort Request for Mailbox 1 */ +#define CAN_TSR_RQCP2 (1 << 16) /* Bit 16 : Request Completed Mailbox 2 */ +#define CAN_TSR_TXOK2 (1 << 17) /* Bit 17 : Transmission OK of Mailbox 2 */ +#define CAN_TSR_ALST2 (1 << 18) /* Bit 18: Arbitration Lost for Mailbox 2 */ +#define CAN_TSR_TERR2 (1 << 19) /* Bit 19: Transmission Error of Mailbox 2 */ +#define CAN_TSR_ABRQ2 (1 << 23) /* Bit 23: Abort Request for Mailbox 2 */ +#define CAN_TSR_CODE_SHIFT (24) /* Bits 25-24: Mailbox Code */ +#define CAN_TSR_CODE_MASK (3 << CAN_TSR_CODE_SHIFT) +#define CAN_TSR_TME0 (1 << 26) /* Bit 26: Transmit Mailbox 0 Empty */ +#define CAN_TSR_TME1 (1 << 27) /* Bit 27: Transmit Mailbox 1 Empty */ +#define CAN_TSR_TME2 (1 << 28) /* Bit 28: Transmit Mailbox 2 Empty */ +#define CAN_TSR_LOW0 (1 << 29) /* Bit 29: Lowest Priority Flag for Mailbox 0 */ +#define CAN_TSR_LOW1 (1 << 30) /* Bit 30: Lowest Priority Flag for Mailbox 1 */ +#define CAN_TSR_LOW2 (1 << 31) /* Bit 31: Lowest Priority Flag for Mailbox 2 */ + +/* CAN receive FIFO 0/1 registers */ + +#define CAN_RFR_FMP_SHIFT (0) /* Bits 1-0: FIFO Message Pending */ +#define CAN_RFR_FMP_MASK (3 << CAN_RFR_FMP_SHIFT) +#define CAN_RFR_FULL (1 << 3) /* Bit 3: FIFO 0 Full */ +#define CAN_RFR_FOVR (1 << 4) /* Bit 4: FIFO 0 Overrun */ +#define CAN_RFR_RFOM (1 << 5) /* Bit 5: Release FIFO 0 Output Mailbox */ + +/* CAN interrupt enable register */ + +#define CAN_IER_TMEIE (1 << 0) /* Bit 0: Transmit Mailbox Empty Interrupt Enable */ +#define CAN_IER_FMPIE0 (1 << 1) /* Bit 1: FIFO Message Pending Interrupt Enable */ +#define CAN_IER_FFIE0 (1 << 2) /* Bit 2: FIFO Full Interrupt Enable */ +#define CAN_IER_FOVIE0 (1 << 3) /* Bit 3: FIFO Overrun Interrupt Enable */ +#define CAN_IER_FMPIE1 (1 << 4) /* Bit 4: FIFO Message Pending Interrupt Enable */ +#define CAN_IER_FFIE1 (1 << 5) /* Bit 5: FIFO Full Interrupt Enable */ +#define CAN_IER_FOVIE1 (1 << 6) /* Bit 6: FIFO Overrun Interrupt Enable */ +#define CAN_IER_EWGIE (1 << 8) /* Bit 8: Error Warning Interrupt Enable */ +#define CAN_IER_EPVIE (1 << 9) /* Bit 9: Error Passive Interrupt Enable */ +#define CAN_IER_BOFIE (1 << 10) /* Bit 10: Bus-Off Interrupt Enable */ +#define CAN_IER_LECIE (1 << 11) /* Bit 11: Last Error Code Interrupt Enable */ +#define CAN_IER_ERRIE (1 << 15) /* Bit 15: Error Interrupt Enable */ +#define CAN_IER_WKUIE (1 << 16) /* Bit 16: Wakeup Interrupt Enable */ +#define CAN_IER_SLKIE (1 << 17) /* Bit 17: Sleep Interrupt Enable */ + +/* CAN error status register */ + +#define CAN_ESR_EWGF (1 << 0) /* Bit 0: Error Warning Flag */ +#define CAN_ESR_EPVF (1 << 1) /* Bit 1: Error Passive Flag */ +#define CAN_ESR_BOFF (1 << 2) /* Bit 2: Bus-Off Flag */ +#define CAN_ESR_LEC_SHIFT (4) /* Bits 6-4: Last Error Code */ +#define CAN_ESR_LEC_MASK (7 << CAN_ESR_LEC_SHIFT) +# define CAN_ESR_NOERROR (0 << CAN_ESR_LEC_SHIFT) /* 000: No Error */ +# define CAN_ESR_STUFFERROR (1 << CAN_ESR_LEC_SHIFT) /* 001: Stuff Error */ +# define CAN_ESR_FORMERROR (2 << CAN_ESR_LEC_SHIFT) /* 010: Form Error */ +# define CAN_ESR_ACKERROR (3 << CAN_ESR_LEC_SHIFT) /* 011: Acknowledgment Error */ +# define CAN_ESR_BRECERROR (4 << CAN_ESR_LEC_SHIFT) /* 100: Bit recessive Error */ +# define CAN_ESR_BDOMERROR (5 << CAN_ESR_LEC_SHIFT) /* 101: Bit dominant Error */ +# define CAN_ESR_CRCERRPR (6 << CAN_ESR_LEC_SHIFT) /* 110: CRC Error */ +# define CAN_ESR_SWERROR (7 << CAN_ESR_LEC_SHIFT) /* 111: Set by software */ +#define CAN_ESR_TEC_SHIFT (16) /* Bits 23-16: LS byte of the 9-bit Transmit Error Counter */ +#define CAN_ESR_TEC_MASK (0xff << CAN_ESR_TEC_SHIF) +#define CAN_ESR_REC_SHIFT (24) /* Bits 31-24: Receive Error Counter */ +#define CAN_ESR_REC_MASK (0xff << CAN_ESR_REC_SHIFT) + +/* CAN bit timing register */ + +#define CAN_BTR_BRP_SHIFT (0) /* Bits 9-0: Baud Rate Prescaler */ +#define CAN_BTR_BRP_MASK (0x03ff << CAN_BTR_BRP_SHIFT) +#define CAN_BTR_TS1_SHIFT (16) /* Bits 19-16: Time Segment 1 */ +#define CAN_BTR_TS1_MASK (0x0f << CAN_BTR_TS1_SHIFT) +#define CAN_BTR_TS2_SHIFT (20) /* Bits 22-20: Time Segment 2 */ +#define CAN_BTR_TS2_MASK (7 << CAN_BTR_TS2_SHIFT) +#define CAN_BTR_SJW_SHIFT (24) /* Bits 25-24: Resynchronization Jump Width */ +#define CAN_BTR_SJW_MASK (3 << CAN_BTR_SJW_SHIFT) +#define CAN_BTR_LBKM (1 << 30) /* Bit 30: Loop Back Mode (Debug) */ +#define CAN_BTR_SILM (1 << 31) /* Bit 31: Silent Mode (Debug) */ + +#define CAN_BTR_BRP_MAX (1024) /* Maximum BTR value (without decrement) */ +#define CAN_BTR_TSEG1_MAX (16) /* Maximum TSEG1 value (without decrement) */ +#define CAN_BTR_TSEG2_MAX (8) /* Maximum TSEG2 value (without decrement) */ + +/* TX mailbox identifier register */ + +#define CAN_TIR_TXRQ (1 << 0) /* Bit 0: Transmit Mailbox Request */ +#define CAN_TIR_RTR (1 << 1) /* Bit 1: Remote Transmission Request */ +#define CAN_TIR_IDE (1 << 2) /* Bit 2: Identifier Extension */ +#define CAN_TIR_EXID_SHIFT (3) /* Bit 3-31: Extended Identifier */ +#define CAN_TIR_EXID_MASK (0x1fffffff << CAN_TIR_EXID_SHIFT) +#define CAN_TIR_STID_SHIFT (21) /* Bits 21-31: Standard Identifier */ +#define CAN_TIR_STID_MASK (0x07ff << CAN_TIR_STID_SHIFT) + +/* Mailbox data length control and time stamp register */ + +#define CAN_TDTR_DLC_SHIFT (0) /* Bits 3:0: Data Length Code */ +#define CAN_TDTR_DLC_MASK (0x0f << CAN_TDTR_DLC_SHIFT) +#define CAN_TDTR_TGT (1 << 8) /* Bit 8: Transmit Global Time */ +#define CAN_TDTR_TIME_SHIFT (16) /* Bits 31:16: Message Time Stamp */ +#define CAN_TDTR_TIME_MASK (0xffff << CAN_TDTR_TIME_SHIFT) + +/* Mailbox data low register */ + +#define CAN_TDLR_DATA0_SHIFT (0) /* Bits 7-0: Data Byte 0 */ +#define CAN_TDLR_DATA0_MASK (0xff << CAN_TDLR_DATA0_SHIFT) +#define CAN_TDLR_DATA1_SHIFT (8) /* Bits 15-8: Data Byte 1 */ +#define CAN_TDLR_DATA1_MASK (0xff << CAN_TDLR_DATA1_SHIFT) +#define CAN_TDLR_DATA2_SHIFT (16) /* Bits 23-16: Data Byte 2 */ +#define CAN_TDLR_DATA2_MASK (0xff << CAN_TDLR_DATA2_SHIFT) +#define CAN_TDLR_DATA3_SHIFT (24) /* Bits 31-24: Data Byte 3 */ +#define CAN_TDLR_DATA3_MASK (0xff << CAN_TDLR_DATA3_SHIFT) + +/* Mailbox data high register */ + +#define CAN_TDHR_DATA4_SHIFT (0) /* Bits 7-0: Data Byte 4 */ +#define CAN_TDHR_DATA4_MASK (0xff << CAN_TDHR_DATA4_SHIFT) +#define CAN_TDHR_DATA5_SHIFT (8) /* Bits 15-8: Data Byte 5 */ +#define CAN_TDHR_DATA5_MASK (0xff << CAN_TDHR_DATA5_SHIFT) +#define CAN_TDHR_DATA6_SHIFT (16) /* Bits 23-16: Data Byte 6 */ +#define CAN_TDHR_DATA6_MASK (0xff << CAN_TDHR_DATA6_SHIFT) +#define CAN_TDHR_DATA7_SHIFT (24) /* Bits 31-24: Data Byte 7 */ +#define CAN_TDHR_DATA7_MASK (0xff << CAN_TDHR_DATA7_SHIFT) + +/* Rx FIFO mailbox identifier register */ + +#define CAN_RIR_RTR (1 << 1) /* Bit 1: Remote Transmission Request */ +#define CAN_RIR_IDE (1 << 2) /* Bit 2: Identifier Extension */ +#define CAN_RIR_EXID_SHIFT (3) /* Bit 3-31: Extended Identifier */ +#define CAN_RIR_EXID_MASK (0x1fffffff << CAN_RIR_EXID_SHIFT) +#define CAN_RIR_STID_SHIFT (21) /* Bits 21-31: Standard Identifier */ +#define CAN_RIR_STID_MASK (0x07ff << CAN_RIR_STID_SHIFT) + +/* Receive FIFO mailbox data length control and time stamp register */ + +#define CAN_RDTR_DLC_SHIFT (0) /* Bits 3:0: Data Length Code */ +#define CAN_RDTR_DLC_MASK (0x0f << CAN_RDTR_DLC_SHIFT) +#define CAN_RDTR_FM_SHIFT (8) /* Bits 15-8: Filter Match Index */ +#define CAN_RDTR_FM_MASK (0xff << CAN_RDTR_FM_SHIFT) +#define CAN_RDTR_TIME_SHIFT (16) /* Bits 31:16: Message Time Stamp */ +#define CAN_RDTR_TIME_MASK (0xffff << CAN_RDTR_TIME_SHIFT) + +/* Receive FIFO mailbox data low register */ + +#define CAN_RDLR_DATA0_SHIFT (0) /* Bits 7-0: Data Byte 0 */ +#define CAN_RDLR_DATA0_MASK (0xff << CAN_RDLR_DATA0_SHIFT) +#define CAN_RDLR_DATA1_SHIFT (8) /* Bits 15-8: Data Byte 1 */ +#define CAN_RDLR_DATA1_MASK (0xff << CAN_RDLR_DATA1_SHIFT) +#define CAN_RDLR_DATA2_SHIFT (16) /* Bits 23-16: Data Byte 2 */ +#define CAN_RDLR_DATA2_MASK (0xff << CAN_RDLR_DATA2_SHIFT) +#define CAN_RDLR_DATA3_SHIFT (24) /* Bits 31-24: Data Byte 3 */ +#define CAN_RDLR_DATA3_MASK (0xff << CAN_RDLR_DATA3_SHIFT) + +/* Receive FIFO mailbox data high register */ + +#define CAN_RDHR_DATA4_SHIFT (0) /* Bits 7-0: Data Byte 4 */ +#define CAN_RDHR_DATA4_MASK (0xff << CAN_RDHR_DATA4_SHIFT) +#define CAN_RDHR_DATA5_SHIFT (8) /* Bits 15-8: Data Byte 5 */ +#define CAN_RDHR_DATA5_MASK (0xff << CAN_RDHR_DATA5_SHIFT) +#define CAN_RDHR_DATA6_SHIFT (16) /* Bits 23-16: Data Byte 6 */ +#define CAN_RDHR_DATA6_MASK (0xff << CAN_RDHR_DATA6_SHIFT) +#define CAN_RDHR_DATA7_SHIFT (24) /* Bits 31-24: Data Byte 7 */ +#define CAN_RDHR_DATA7_MASK (0xff << CAN_RDHR_DATA7_SHIFT) + +/* CAN filter master register */ + +#define CAN_FMR_FINIT (1 << 0) /* Bit 0: Filter Init Mode */ +#if defined(CONFIG_STM32_CONNECTIVITYLINE) || defined(CONFIG_STM32_STM32F20XX) || defined(CONFIG_STM32_STM32F40XX) +# define CAN_FMR_CAN2SB_SHIFT (8) /* Bits 13-8: CAN2 start bank */ +# define CAN_FMR_CAN2SB_MASK (0x3f << CAN_FMR_CAN2SB_SHIFT) +#endif + +/* CAN filter mode register */ + +#if defined(CONFIG_STM32_CONNECTIVITYLINE) || defined(CONFIG_STM32_STM32F20XX) || defined(CONFIG_STM32_STM32F40XX) +# define CAN_FM1R_FBM_SHIFT (0) /* Bits 13:0: Filter Mode */ +# define CAN_FM1R_FBM_MASK (0x3fff << CAN_FM1R_FBM_SHIFT) +#else +# define CAN_FM1R_FBM_SHIFT (0) /* Bits 27:0: Filter Mode */ +# define CAN_FM1R_FBM_MASK (0x0fffffff << CAN_FM1R_FBM_SHIFT) +#endif + +/* CAN filter scale register */ + +#if defined(CONFIG_STM32_CONNECTIVITYLINE) || defined(CONFIG_STM32_STM32F20XX) || defined(CONFIG_STM32_STM32F40XX) +# define CAN_FS1R_FSC_SHIFT (0) /* Bits 13:0: Filter Scale Configuration */ +# define CAN_FS1R_FSC_MASK (0x3fff << CAN_FS1R_FSC_SHIFT) +#else +# define CAN_FS1R_FSC_SHIFT (0) /* Bits 27:0: Filter Scale Configuration */ +# define CAN_FS1R_FSC_MASK (0x0fffffff << CAN_FS1R_FSC_SHIFT) +#endif + +/* CAN filter FIFO assignment register */ + +#if defined(CONFIG_STM32_CONNECTIVITYLINE) || defined(CONFIG_STM32_STM32F20XX) || defined(CONFIG_STM32_STM32F40XX) +# define CAN_FFA1R_FFA_SHIFT (0) /* Bits 13:0: Filter FIFO Assignment */ +# define CAN_FFA1R_FFA_MASK (0x3fff << CAN_FFA1R_FFA_SHIFT) +#else +# define CAN_FFA1R_FFA_SHIFT (0) /* Bits 27:0: Filter FIFO Assignment */ +# define CAN_FFA1R_FFA_MASK (0x0fffffff << CAN_FFA1R_FFA_SHIFT) +#endif + +/* CAN filter activation register */ + +#if defined(CONFIG_STM32_CONNECTIVITYLINE) || defined(CONFIG_STM32_STM32F20XX) || defined(CONFIG_STM32_STM32F40XX) +# define CAN_FA1R_FACT_SHIFT (0) /* Bits 13:0: Filter Active */ +# define CAN_FA1R_FACT_MASK (0x3fff << CAN_FA1R_FACT_SHIFT) +#else +# define CAN_FA1R_FACT_SHIFT (0) /* Bits 27:0: Filter Active */ +# define CAN_FA1R_FACT_MASK (0x0fffffff << CAN_FA1R_FACT_SHIFT) +#endif + +/************************************************************************************ + * Public Types + ************************************************************************************/ + +/************************************************************************************ + * Public Data + ************************************************************************************/ + +/************************************************************************************ + * Public Functions + ************************************************************************************/ + +#endif /* __ARCH_ARM_SRC_STM32_CHIP_STM32_CAN_H */ |