diff options
Diffstat (limited to 'nuttx/arch/arm/src/stm32/stm32_irq.c')
-rw-r--r-- | nuttx/arch/arm/src/stm32/stm32_irq.c | 476 |
1 files changed, 476 insertions, 0 deletions
diff --git a/nuttx/arch/arm/src/stm32/stm32_irq.c b/nuttx/arch/arm/src/stm32/stm32_irq.c new file mode 100644 index 000000000..36a5cf5fa --- /dev/null +++ b/nuttx/arch/arm/src/stm32/stm32_irq.c @@ -0,0 +1,476 @@ +/**************************************************************************** + * arch/arm/src/stm32/stm32_irq.c + * arch/arm/src/chip/stm32_irq.c + * + * Copyright (C) 2009-2012 Gregory Nutt. All rights reserved. + * Author: Gregory Nutt <gnutt@nuttx.org> + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * 3. Neither the name NuttX nor the names of its contributors may be + * used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS + * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE + * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, + * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS + * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED + * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN + * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************/ + +/**************************************************************************** + * Included Files + ****************************************************************************/ + +#include <nuttx/config.h> + +#include <stdint.h> +#include <debug.h> + +#include <nuttx/irq.h> +#include <nuttx/arch.h> +#include <arch/irq.h> + +#include "nvic.h" +#include "up_arch.h" +#include "os_internal.h" +#include "up_internal.h" +#include "stm32_internal.h" + +/**************************************************************************** + * Definitions + ****************************************************************************/ + +/* Enable NVIC debug features that are probably only desireable during + * bringup + */ + +#undef STM32_IRQ_DEBUG + +/* Get a 32-bit version of the default priority */ + +#define DEFPRIORITY32 \ + (NVIC_SYSH_PRIORITY_DEFAULT << 24 |\ + NVIC_SYSH_PRIORITY_DEFAULT << 16 |\ + NVIC_SYSH_PRIORITY_DEFAULT << 8 |\ + NVIC_SYSH_PRIORITY_DEFAULT) + +/**************************************************************************** + * Public Data + ****************************************************************************/ + +volatile uint32_t *current_regs; + +/**************************************************************************** + * Private Data + ****************************************************************************/ + +/**************************************************************************** + * Private Functions + ****************************************************************************/ + +/**************************************************************************** + * Name: stm32_dumpnvic + * + * Description: + * Dump some interesting NVIC registers + * + ****************************************************************************/ + +#if defined(STM32_IRQ_DEBUG) && defined (CONFIG_DEBUG) +static void stm32_dumpnvic(const char *msg, int irq) +{ + irqstate_t flags; + + flags = irqsave(); + slldbg("NVIC (%s, irq=%d):\n", msg, irq); + slldbg(" INTCTRL: %08x VECTAB: %08x\n", + getreg32(NVIC_INTCTRL), getreg32(NVIC_VECTAB)); +#if 0 + slldbg(" SYSH ENABLE MEMFAULT: %08x BUSFAULT: %08x USGFAULT: %08x SYSTICK: %08x\n", + getreg32(NVIC_SYSHCON_MEMFAULTENA), getreg32(NVIC_SYSHCON_BUSFAULTENA), + getreg32(NVIC_SYSHCON_USGFAULTENA), getreg32(NVIC_SYSTICK_CTRL_ENABLE)); +#endif + slldbg(" IRQ ENABLE: %08x %08x %08x\n", + getreg32(NVIC_IRQ0_31_ENABLE), getreg32(NVIC_IRQ32_63_ENABLE), + getreg32(NVIC_IRQ64_95_ENABLE)); + slldbg(" SYSH_PRIO: %08x %08x %08x\n", + getreg32(NVIC_SYSH4_7_PRIORITY), getreg32(NVIC_SYSH8_11_PRIORITY), + getreg32(NVIC_SYSH12_15_PRIORITY)); + slldbg(" IRQ PRIO: %08x %08x %08x %08x\n", + getreg32(NVIC_IRQ0_3_PRIORITY), getreg32(NVIC_IRQ4_7_PRIORITY), + getreg32(NVIC_IRQ8_11_PRIORITY), getreg32(NVIC_IRQ12_15_PRIORITY)); + slldbg(" %08x %08x %08x %08x\n", + getreg32(NVIC_IRQ16_19_PRIORITY), getreg32(NVIC_IRQ20_23_PRIORITY), + getreg32(NVIC_IRQ24_27_PRIORITY), getreg32(NVIC_IRQ28_31_PRIORITY)); + slldbg(" %08x %08x %08x %08x\n", + getreg32(NVIC_IRQ32_35_PRIORITY), getreg32(NVIC_IRQ36_39_PRIORITY), + getreg32(NVIC_IRQ40_43_PRIORITY), getreg32(NVIC_IRQ44_47_PRIORITY)); + slldbg(" %08x %08x %08x %08x\n", + getreg32(NVIC_IRQ48_51_PRIORITY), getreg32(NVIC_IRQ52_55_PRIORITY), + getreg32(NVIC_IRQ56_59_PRIORITY), getreg32(NVIC_IRQ60_63_PRIORITY)); + slldbg(" %08x\n", + getreg32(NVIC_IRQ64_67_PRIORITY)); + irqrestore(flags); +} +#else +# define stm32_dumpnvic(msg, irq) +#endif + +/**************************************************************************** + * Name: stm32_nmi, stm32_busfault, stm32_usagefault, stm32_pendsv, + * stm32_dbgmonitor, stm32_pendsv, stm32_reserved + * + * Description: + * Handlers for various execptions. None are handled and all are fatal + * error conditions. The only advantage these provided over the default + * unexpected interrupt handler is that they provide a diagnostic output. + * + ****************************************************************************/ + +#ifdef CONFIG_DEBUG +static int stm32_nmi(int irq, FAR void *context) +{ + (void)irqsave(); + dbg("PANIC!!! NMI received\n"); + PANIC(OSERR_UNEXPECTEDISR); + return 0; +} + +static int stm32_busfault(int irq, FAR void *context) +{ + (void)irqsave(); + dbg("PANIC!!! Bus fault recived\n"); + PANIC(OSERR_UNEXPECTEDISR); + return 0; +} + +static int stm32_usagefault(int irq, FAR void *context) +{ + (void)irqsave(); + dbg("PANIC!!! Usage fault received\n"); + PANIC(OSERR_UNEXPECTEDISR); + return 0; +} + +static int stm32_pendsv(int irq, FAR void *context) +{ + (void)irqsave(); + dbg("PANIC!!! PendSV received\n"); + PANIC(OSERR_UNEXPECTEDISR); + return 0; +} + +static int stm32_dbgmonitor(int irq, FAR void *context) +{ + (void)irqsave(); + dbg("PANIC!!! Debug Monitor receieved\n"); + PANIC(OSERR_UNEXPECTEDISR); + return 0; +} + +static int stm32_reserved(int irq, FAR void *context) +{ + (void)irqsave(); + dbg("PANIC!!! Reserved interrupt\n"); + PANIC(OSERR_UNEXPECTEDISR); + return 0; +} +#endif + +/**************************************************************************** + * Name: stm32_irqinfo + * + * Description: + * Given an IRQ number, provide the register and bit setting to enable or + * disable the irq. + * + ****************************************************************************/ + +static int stm32_irqinfo(int irq, uint32_t *regaddr, uint32_t *bit) +{ + DEBUGASSERT(irq >= STM32_IRQ_NMI && irq < NR_IRQS); + + /* Check for external interrupt */ + + if (irq >= STM32_IRQ_INTERRUPTS) + { + if (irq < STM32_IRQ_INTERRUPTS + 32) + { + *regaddr = NVIC_IRQ0_31_ENABLE; + *bit = 1 << (irq - STM32_IRQ_INTERRUPTS); + } + else if (irq < STM32_IRQ_INTERRUPTS + 64) + { + *regaddr = NVIC_IRQ32_63_ENABLE; + *bit = 1 << (irq - STM32_IRQ_INTERRUPTS - 32); + } + else if (irq < NR_IRQS) + { + *regaddr = NVIC_IRQ64_95_ENABLE; + *bit = 1 << (irq - STM32_IRQ_INTERRUPTS - 64); + } + else + { + return ERROR; /* Invalid interrupt */ + } + } + + /* Handle processor exceptions. Only a few can be disabled */ + + else + { + *regaddr = NVIC_SYSHCON; + if (irq == STM32_IRQ_MEMFAULT) + { + *bit = NVIC_SYSHCON_MEMFAULTENA; + } + else if (irq == STM32_IRQ_BUSFAULT) + { + *bit = NVIC_SYSHCON_BUSFAULTENA; + } + else if (irq == STM32_IRQ_USAGEFAULT) + { + *bit = NVIC_SYSHCON_USGFAULTENA; + } + else if (irq == STM32_IRQ_SYSTICK) + { + *regaddr = NVIC_SYSTICK_CTRL; + *bit = NVIC_SYSTICK_CTRL_ENABLE; + } + else + { + return ERROR; /* Invalid or unsupported exception */ + } + } + + return OK; +} + +/**************************************************************************** + * Public Functions + ****************************************************************************/ + +/**************************************************************************** + * Name: up_irqinitialize + ****************************************************************************/ + +void up_irqinitialize(void) +{ + uint32_t regaddr; + int num_priority_registers; + + /* Disable all interrupts */ + + putreg32(0, NVIC_IRQ0_31_ENABLE); + putreg32(0, NVIC_IRQ32_63_ENABLE); + + /* The standard location for the vector table is at the beginning of FLASH + * at address 0x0800:0000. If we are using the STMicro DFU bootloader, then + * the vector table will be offset to a different location in FLASH and we + * will need to set the NVIC vector location to this alternative location. + */ + +#ifdef CONFIG_STM32_DFU + putreg32((uint32_t)stm32_vectors, NVIC_VECTAB); +#endif + + /* Set all interrupts (and exceptions) to the default priority */ + + putreg32(DEFPRIORITY32, NVIC_SYSH4_7_PRIORITY); + putreg32(DEFPRIORITY32, NVIC_SYSH8_11_PRIORITY); + putreg32(DEFPRIORITY32, NVIC_SYSH12_15_PRIORITY); + + /* The NVIC ICTR register (bits 0-4) holds the number of of interrupt + * lines that the NVIC supports: + * + * 0 -> 32 interrupt lines, 8 priority registers + * 1 -> 64 " " " ", 16 priority registers + * 2 -> 96 " " " ", 32 priority registers + * ... + */ + + num_priority_registers = (getreg32(NVIC_ICTR) + 1) * 8; + + /* Now set all of the interrupt lines to the default priority */ + + regaddr = NVIC_IRQ0_3_PRIORITY; + while (num_priority_registers--) + { + putreg32(DEFPRIORITY32, regaddr); + regaddr += 4; + } + + /* currents_regs is non-NULL only while processing an interrupt */ + + current_regs = NULL; + + /* Attach the SVCall and Hard Fault exception handlers. The SVCall + * exception is used for performing context switches; The Hard Fault + * must also be caught because a SVCall may show up as a Hard Fault + * under certain conditions. + */ + + irq_attach(STM32_IRQ_SVCALL, up_svcall); + irq_attach(STM32_IRQ_HARDFAULT, up_hardfault); + + /* Set the priority of the SVCall interrupt */ + +#ifdef CONFIG_ARCH_IRQPRIO +/* up_prioritize_irq(STM32_IRQ_PENDSV, NVIC_SYSH_PRIORITY_MIN); */ +#endif + + /* If the MPU is enabled, then attach and enable the Memory Management + * Fault handler. + */ + +#ifdef CONFIG_ARMV7M_MPU + irq_attach(STM32_IRQ_MEMFAULT, up_memfault); + up_enable_irq(STM32_IRQ_MEMFAULT); +#endif + + /* Attach all other processor exceptions (except reset and sys tick) */ + +#ifdef CONFIG_DEBUG + irq_attach(STM32_IRQ_NMI, stm32_nmi); +#ifndef CONFIG_ARMV7M_MPU + irq_attach(STM32_IRQ_MEMFAULT, up_memfault); +#endif + irq_attach(STM32_IRQ_BUSFAULT, stm32_busfault); + irq_attach(STM32_IRQ_USAGEFAULT, stm32_usagefault); + irq_attach(STM32_IRQ_PENDSV, stm32_pendsv); + irq_attach(STM32_IRQ_DBGMONITOR, stm32_dbgmonitor); + irq_attach(STM32_IRQ_RESERVED, stm32_reserved); +#endif + + stm32_dumpnvic("initial", NR_IRQS); + +#ifndef CONFIG_SUPPRESS_INTERRUPTS + + /* And finally, enable interrupts */ + + setbasepri(NVIC_SYSH_PRIORITY_MAX); + irqrestore(0); +#endif +} + +/**************************************************************************** + * Name: up_disable_irq + * + * Description: + * Disable the IRQ specified by 'irq' + * + ****************************************************************************/ + +void up_disable_irq(int irq) +{ + uint32_t regaddr; + uint32_t regval; + uint32_t bit; + + if (stm32_irqinfo(irq, ®addr, &bit) == 0) + { + /* Clear the appropriate bit in the register to enable the interrupt */ + + regval = getreg32(regaddr); + regval &= ~bit; + putreg32(regval, regaddr); + } + stm32_dumpnvic("disable", irq); +} + +/**************************************************************************** + * Name: up_enable_irq + * + * Description: + * Enable the IRQ specified by 'irq' + * + ****************************************************************************/ + +void up_enable_irq(int irq) +{ + uint32_t regaddr; + uint32_t regval; + uint32_t bit; + + if (stm32_irqinfo(irq, ®addr, &bit) == 0) + { + /* Set the appropriate bit in the register to enable the interrupt */ + + regval = getreg32(regaddr); + regval |= bit; + putreg32(regval, regaddr); + } + stm32_dumpnvic("enable", irq); +} + +/**************************************************************************** + * Name: up_maskack_irq + * + * Description: + * Mask the IRQ and acknowledge it + * + ****************************************************************************/ + +void up_maskack_irq(int irq) +{ + up_disable_irq(irq); +} + +/**************************************************************************** + * Name: up_prioritize_irq + * + * Description: + * Set the priority of an IRQ. + * + * Since this API is not supported on all architectures, it should be + * avoided in common implementations where possible. + * + ****************************************************************************/ + +#ifdef CONFIG_ARCH_IRQPRIO +int up_prioritize_irq(int irq, int priority) +{ + uint32_t regaddr; + uint32_t regval; + int shift; + + DEBUGASSERT(irq >= STM32_IRQ_MEMFAULT && irq < NR_IRQS && (unsigned)priority <= NVIC_SYSH_PRIORITY_MIN); + + if (irq < STM32_IRQ_INTERRUPTS) + { + irq -= 4; + regaddr = NVIC_SYSH_PRIORITY(irq); + } + else + { + irq -= STM32_IRQ_INTERRUPTS; + regaddr = NVIC_IRQ_PRIORITY(irq); + } + + regval = getreg32(regaddr); + shift = ((irq & 3) << 3); + regval &= ~(0xff << shift); + regval |= (priority << shift); + putreg32(regval, regaddr); + + stm32_dumpnvic("prioritize", irq); + return OK; +} +#endif |