diff options
Diffstat (limited to 'nuttx/arch/arm/src/stm32/stm32_wwdg.c')
-rw-r--r-- | nuttx/arch/arm/src/stm32/stm32_wwdg.c | 807 |
1 files changed, 807 insertions, 0 deletions
diff --git a/nuttx/arch/arm/src/stm32/stm32_wwdg.c b/nuttx/arch/arm/src/stm32/stm32_wwdg.c new file mode 100644 index 000000000..4506fa4e0 --- /dev/null +++ b/nuttx/arch/arm/src/stm32/stm32_wwdg.c @@ -0,0 +1,807 @@ +/**************************************************************************** + * arch/arm/src/stm32/stm32_wwdg.c + * + * Copyright (C) 2012 Gregory Nutt. All rights reserved. + * Author: Gregory Nutt <gnutt@nuttx.org> + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * 3. Neither the name NuttX nor the names of its contributors may be + * used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS + * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE + * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, + * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS + * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED + * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN + * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************/ + +/**************************************************************************** + * Included Files + ****************************************************************************/ + +#include <nuttx/config.h> +#include <nuttx/arch.h> + +#include <stdint.h> +#include <errno.h> +#include <debug.h> + +#include <nuttx/watchdog.h> +#include <arch/board/board.h> + +#include "up_arch.h" +#include "chip/stm32_dbgmcu.h" +#include "stm32_wdg.h" + +#if defined(CONFIG_WATCHDOG) && defined(CONFIG_STM32_WWDG) + +/**************************************************************************** + * Pre-Processor Definitions + ****************************************************************************/ +/* Clocking *****************************************************************/ +/* The minimum frequency of the WWDG clock is: + * + * Fmin = PCLK1 / 4096 / 8 + * + * So the maximum delay (in milliseconds) is then: + * + * 1000 * (WWDG_CR_T_MAX+1) / Fmin + * + * For example, if PCLK1 = 42MHz, then the maximum delay is: + * + * Fmin = 1281.74 + * 1000 * 64 / Fmin = 49.93 msec + */ + +#define WWDG_FMIN (STM32_PCLK1_FREQUENCY / 4096 / 8) +#define WWDG_MAXTIMEOUT (1000 * (WWDG_CR_T_MAX+1) / WWDG_FMIN) + +/* Configuration ************************************************************/ + +#ifndef CONFIG_STM32_WWDG_DEFTIMOUT +# define CONFIG_STM32_WWDG_DEFTIMOUT WWDG_MAXTIMEOUT +#endif + +/* Debug ********************************************************************/ +/* Non-standard debug that may be enabled just for testing the watchdog + * driver. NOTE: that only lldbg types are used so that the output is + * immediately available. + */ + +#ifdef CONFIG_DEBUG_WATCHDOG +# define wddbg lldbg +# define wdvdbg llvdbg +#else +# define wddbg(x...) +# define wdvdbg(x...) +#endif + +/**************************************************************************** + * Private Types + ****************************************************************************/ +/* This structure provides the private representation of the "lower-half" + * driver state structure. This structure must be cast-compatible with the + * well-known watchdog_lowerhalf_s structure. + */ + +struct stm32_lowerhalf_s +{ + FAR const struct watchdog_ops_s *ops; /* Lower half operations */ + xcpt_t handler; /* Current EWI interrupt handler */ + uint32_t timeout; /* The actual timeout value */ + uint32_t fwwdg; /* WWDG clock frequency */ + bool started; /* The timer has been started */ + uint8_t reload; /* The 7-bit reload field reset value */ + uint8_t window; /* The 7-bit window (W) field value */ +}; + +/**************************************************************************** + * Private Function Prototypes + ****************************************************************************/ +/* Register operations ******************************************************/ + +#if defined(CONFIG_STM32_WWDG_REGDEBUG) && defined(CONFIG_DEBUG) +static uint16_t stm32_getreg(uint32_t addr); +static void stm32_putreg(uint16_t val, uint32_t addr); +#else +# define stm32_getreg(addr) getreg32(addr) +# define stm32_putreg(val,addr) putreg32(val,addr) +#endif +static void stm32_setwindow(FAR struct stm32_lowerhalf_s *priv, + uint8_t window); + +/* Interrupt hanlding *******************************************************/ + +static int stm32_interrupt(int irq, FAR void *context); + +/* "Lower half" driver methods **********************************************/ + +static int stm32_start(FAR struct watchdog_lowerhalf_s *lower); +static int stm32_stop(FAR struct watchdog_lowerhalf_s *lower); +static int stm32_keepalive(FAR struct watchdog_lowerhalf_s *lower); +static int stm32_getstatus(FAR struct watchdog_lowerhalf_s *lower, + FAR struct watchdog_status_s *status); +static int stm32_settimeout(FAR struct watchdog_lowerhalf_s *lower, + uint32_t timeout); +static xcpt_t stm32_capture(FAR struct watchdog_lowerhalf_s *lower, + xcpt_t handler); +static int stm32_ioctl(FAR struct watchdog_lowerhalf_s *lower, int cmd, + unsigned long arg); + +/**************************************************************************** + * Private Data + ****************************************************************************/ +/* "Lower half" driver methods */ + +static const struct watchdog_ops_s g_wdgops = +{ + .start = stm32_start, + .stop = stm32_stop, + .keepalive = stm32_keepalive, + .getstatus = stm32_getstatus, + .settimeout = stm32_settimeout, + .capture = stm32_capture, + .ioctl = stm32_ioctl, +}; + +/* "Lower half" driver state */ + +static struct stm32_lowerhalf_s g_wdgdev; + +/**************************************************************************** + * Private Functions + ****************************************************************************/ + +/**************************************************************************** + * Name: stm32_getreg + * + * Description: + * Get the contents of an STM32 register + * + ****************************************************************************/ + +#if defined(CONFIG_STM32_WWDG_REGDEBUG) && defined(CONFIG_DEBUG) +static uint16_t stm32_getreg(uint32_t addr) +{ + static uint32_t prevaddr = 0; + static uint32_t count = 0; + static uint16_t preval = 0; + + /* Read the value from the register */ + + uint16_t val = getreg16(addr); + + /* Is this the same value that we read from the same registe last time? Are + * we polling the register? If so, suppress some of the output. + */ + + if (addr == prevaddr && val == preval) + { + if (count == 0xffffffff || ++count > 3) + { + if (count == 4) + { + lldbg("...\n"); + } + return val; + } + } + + /* No this is a new address or value */ + + else + { + /* Did we print "..." for the previous value? */ + + if (count > 3) + { + /* Yes.. then show how many times the value repeated */ + + lldbg("[repeats %d more times]\n", count-3); + } + + /* Save the new address, value, and count */ + + prevaddr = addr; + preval = val; + count = 1; + } + + /* Show the register value read */ + + lldbg("%08x->%04x\n", addr, val); + return val; +} +#endif + +/**************************************************************************** + * Name: stm32_putreg + * + * Description: + * Set the contents of an STM32 register to a value + * + ****************************************************************************/ + +#if defined(CONFIG_STM32_WWDG_REGDEBUG) && defined(CONFIG_DEBUG) +static void stm32_putreg(uint16_t val, uint32_t addr) +{ + /* Show the register value being written */ + + lldbg("%08x<-%04x\n", addr, val); + + /* Write the value */ + + putreg16(val, addr); +} +#endif + +/**************************************************************************** + * Name: stm32_setwindow + * + * Description: + * Set the CFR window value. The window value is compared to the down- + * counter when the counter is updated. The WWDG counter should be updated + * only when the counter is below this window value (and greater than 64) + * otherwise a reset will be generated + * + ****************************************************************************/ + +static void stm32_setwindow(FAR struct stm32_lowerhalf_s *priv, uint8_t window) +{ + uint16_t regval; + + /* Set W[6:0] bits according to selected window value */ + + regval = stm32_getreg(STM32_WWDG_CFR); + regval &= ~WWDG_CFR_W_MASK; + regval |= window << WWDG_CFR_W_SHIFT; + stm32_putreg(regval, STM32_WWDG_CFR); + + /* Remember the window setting */ + + priv->window = window; +} + +/**************************************************************************** + * Name: stm32_interrupt + * + * Description: + * WWDG early warning interrupt + * + * Input Parameters: + * Usual interrupt handler arguments. + * + * Returned Values: + * Always returns OK. + * + ****************************************************************************/ + +static int stm32_interrupt(int irq, FAR void *context) +{ + FAR struct stm32_lowerhalf_s *priv = &g_wdgdev; + uint16_t regval; + + /* Check if the EWI interrupt is really pending */ + + regval = stm32_getreg(STM32_WWDG_SR); + if ((regval & WWDG_SR_EWIF) != 0) + { + /* Is there a registered handler? */ + + if (priv->handler) + { + /* Yes... NOTE: This interrupt service routine (ISR) must reload + * the WWDG counter to prevent the reset. Otherwise, we will reset + * upon return. + */ + + priv->handler(irq, context); + } + + /* The EWI interrupt is cleared by writing '0' to the EWIF bit in the + * WWDG_SR register. + */ + + regval &= ~WWDG_SR_EWIF; + stm32_putreg(regval, STM32_WWDG_SR); + } + + return OK; +} + +/**************************************************************************** + * Name: stm32_start + * + * Description: + * Start the watchdog timer, resetting the time to the current timeout, + * + * Input Parameters: + * lower - A pointer the publicly visible representation of the "lower-half" + * driver state structure. + * + * Returned Values: + * Zero on success; a negated errno value on failure. + * + ****************************************************************************/ + +static int stm32_start(FAR struct watchdog_lowerhalf_s *lower) +{ + FAR struct stm32_lowerhalf_s *priv = (FAR struct stm32_lowerhalf_s *)lower; + + wdvdbg("Entry\n"); + DEBUGASSERT(priv); + + /* The watchdog is always disabled after a reset. It is enabled by setting + * the WDGA bit in the WWDG_CR register, then it cannot be disabled again + * except by a reset. + */ + + stm32_putreg(WWDG_CR_WDGA | WWDG_CR_T_RESET | priv->reload, STM32_WWDG_CR); + priv->started = true; + return OK; +} + +/**************************************************************************** + * Name: stm32_stop + * + * Description: + * Stop the watchdog timer + * + * Input Parameters: + * lower - A pointer the publicly visible representation of the "lower-half" + * driver state structure. + * + * Returned Values: + * Zero on success; a negated errno value on failure. + * + ****************************************************************************/ + +static int stm32_stop(FAR struct watchdog_lowerhalf_s *lower) +{ + /* The watchdog is always disabled after a reset. It is enabled by setting + * the WDGA bit in the WWDG_CR register, then it cannot be disabled again + * except by a reset. + */ + + wdvdbg("Entry\n"); + return -ENOSYS; +} + +/**************************************************************************** + * Name: stm32_keepalive + * + * Description: + * Reset the watchdog timer to the current timeout value, prevent any + * imminent watchdog timeouts. This is sometimes referred as "pinging" + * the atchdog timer or "petting the dog". + * + * The application program must write in the WWDG_CR register at regular + * intervals during normal operation to prevent an MCU reset. This operation + * must occur only when the counter value is lower than the window register + * value. The value to be stored in the WWDG_CR register must be between + * 0xff and 0xC0: + * + * Input Parameters: + * lower - A pointer the publicly visible representation of the "lower-half" + * driver state structure. + * + * Returned Values: + * Zero on success; a negated errno value on failure. + * + ****************************************************************************/ + +static int stm32_keepalive(FAR struct watchdog_lowerhalf_s *lower) +{ + FAR struct stm32_lowerhalf_s *priv = (FAR struct stm32_lowerhalf_s *)lower; + + wdvdbg("Entry\n"); + DEBUGASSERT(priv); + + /* Write to T[6:0] bits to configure the counter value, no need to do + * a read-modify-write; writing a 0 to WDGA bit does nothing. + */ + + stm32_putreg((WWDG_CR_T_RESET | priv->reload), STM32_WWDG_CR); + return OK; +} + +/**************************************************************************** + * Name: stm32_getstatus + * + * Description: + * Get the current watchdog timer status + * + * Input Parameters: + * lower - A pointer the publicly visible representation of the "lower-half" + * driver state structure. + * stawtus - The location to return the watchdog status information. + * + * Returned Values: + * Zero on success; a negated errno value on failure. + * + ****************************************************************************/ + +static int stm32_getstatus(FAR struct watchdog_lowerhalf_s *lower, + FAR struct watchdog_status_s *status) +{ + FAR struct stm32_lowerhalf_s *priv = (FAR struct stm32_lowerhalf_s *)lower; + uint32_t elapsed; + uint16_t reload; + + wdvdbg("Entry\n"); + DEBUGASSERT(priv); + + /* Return the status bit */ + + status->flags = WDFLAGS_RESET; + if (priv->started) + { + status->flags |= WDFLAGS_ACTIVE; + } + + if (priv->handler) + { + status->flags |= WDFLAGS_CAPTURE; + } + + /* Return the actual timeout is milliseconds */ + + status->timeout = priv->timeout; + + /* Get the time remaining until the watchdog expires (in milliseconds) */ + + reload = (stm32_getreg(STM32_WWDG_CR) >> WWDG_CR_T_SHIFT) & 0x7f; + elapsed = priv->reload - reload; + status->timeleft = (priv->timeout * elapsed) / (priv->reload + 1); + + wdvdbg("Status :\n"); + wdvdbg(" flags : %08x\n", status->flags); + wdvdbg(" timeout : %d\n", status->timeout); + wdvdbg(" timeleft : %d\n", status->flags); + return OK; +} + +/**************************************************************************** + * Name: stm32_settimeout + * + * Description: + * Set a new timeout value (and reset the watchdog timer) + * + * Input Parameters: + * lower - A pointer the publicly visible representation of the "lower-half" + * driver state structure. + * timeout - The new timeout value in millisecnds. + * + * Returned Values: + * Zero on success; a negated errno value on failure. + * + ****************************************************************************/ + +static int stm32_settimeout(FAR struct watchdog_lowerhalf_s *lower, + uint32_t timeout) +{ + FAR struct stm32_lowerhalf_s *priv = (FAR struct stm32_lowerhalf_s *)lower; + uint32_t fwwdg; + uint32_t reload; + uint16_t regval; + int wdgtb; + + DEBUGASSERT(priv); + wdvdbg("Entry: timeout=%d\n", timeout); + + /* Can this timeout be represented? */ + + if (timeout < 1 || timeout > WWDG_MAXTIMEOUT) + { + wddbg("Cannot represent timeout=%d > %d\n", + timeout, WWDG_MAXTIMEOUT); + return -ERANGE; + } + + /* Determine prescaler value. + * + * Fwwdg = PCLK1/4096/prescaler. + * + * Where + * Fwwwdg is the frequency of the WWDG clock + * wdgtb is one of {1, 2, 4, or 8} + */ + + /* Select the smallest prescaler that will result in a reload field value that is + * less than the maximum. + */ + + for (wdgtb = 0; ; wdgtb++) + { + /* WDGTB = 0 -> Divider = 1 = 1 << 0 + * WDGTB = 1 -> Divider = 2 = 1 << 1 + * WDGTB = 2 -> Divider = 4 = 1 << 2 + * WDGTB = 3 -> Divider = 8 = 1 << 3 + */ + + /* Get the WWDG counter frequency in Hz. */ + + fwwdg = (STM32_PCLK1_FREQUENCY/4096) >> wdgtb; + + /* The formula to calculate the timeout value is given by: + * + * timeout = 1000 * (reload + 1) / Fwwdg, OR + * reload = timeout * Fwwdg / 1000 - 1 + * + * Where + * timeout is the desired timout in milliseconds + * reload is the contents of T{5:0] + * Fwwdg is the frequency of the WWDG clock + */ + + reload = timeout * fwwdg / 1000 - 1; + + /* If this reload valid is less than the maximum or we are not ready + * at the prescaler value, then break out of the loop to use these + * settings. + */ + +#if 0 + wdvdbg("wdgtb=%d fwwdg=%d reload=%d timout=%d\n", + wdgtb, fwwdg, reload, 1000 * (reload + 1) / fwwdg); +#endif + if (reload <= WWDG_CR_T_MAX || wdgtb == 3) + { + /* Note that we explicity break out of the loop rather than using + * the 'for' loop termination logic because we do not want the + * value of wdgtb to be incremented. + */ + + break; + } + } + + /* Make sure that the final reload value is within range */ + + if (reload > WWDG_CR_T_MAX) + { + reload = WWDG_CR_T_MAX; + } + + /* Calculate and save the actual timeout value in milliseconds: + * + * timeout = 1000 * (reload + 1) / Fwwdg + */ + + priv->timeout = 1000 * (reload + 1) / fwwdg; + + /* Remember the selected values */ + + priv->fwwdg = fwwdg; + priv->reload = reload; + + wdvdbg("wdgtb=%d fwwdg=%d reload=%d timout=%d\n", + wdgtb, fwwdg, reload, priv->timeout); + + /* Set WDGTB[1:0] bits according to calculated value */ + + regval = stm32_getreg(STM32_WWDG_CFR); + regval &= ~WWDG_CFR_WDGTB_MASK; + regval |= (uint16_t)wdgtb << WWDG_CFR_WDGTB_SHIFT; + stm32_putreg(regval, STM32_WWDG_CFR); + + /* Reset the 7-bit window value to the maximum value.. essentially disabling + * the lower limit of the watchdog reset time. + */ + + stm32_setwindow(priv, 0x7f); + return OK; +} + +/**************************************************************************** + * Name: stm32_capture + * + * Description: + * Don't reset on watchdog timer timeout; instead, call this user provider + * timeout handler. NOTE: Providing handler==NULL will restore the reset + * behavior. + * + * Input Parameters: + * lower - A pointer the publicly visible representation of the "lower-half" + * driver state structure. + * newhandler - The new watchdog expiration function pointer. If this + * function pointer is NULL, then the the reset-on-expiration + * behavior is restored, + * + * Returned Values: + * The previous watchdog expiration function pointer or NULL is there was + * no previous function pointer, i.e., if the previous behavior was + * reset-on-expiration (NULL is also returned if an error occurs). + * + ****************************************************************************/ + +static xcpt_t stm32_capture(FAR struct watchdog_lowerhalf_s *lower, + xcpt_t handler) +{ + FAR struct stm32_lowerhalf_s *priv = (FAR struct stm32_lowerhalf_s *)lower; + irqstate_t flags; + xcpt_t oldhandler; + uint16_t regval; + + DEBUGASSERT(priv); + wdvdbg("Entry: handler=%p\n", handler); + + /* Get the old handler return value */ + + flags = irqsave(); + oldhandler = priv->handler; + + /* Save the new handler */ + + priv->handler = handler; + + /* Are we attaching or detaching the handler? */ + + regval = stm32_getreg(STM32_WWDG_CFR); + if (handler) + { + /* Attaching... Enable the EWI interrupt */ + + regval |= WWDG_CFR_EWI; + stm32_putreg(regval, STM32_WWDG_CFR); + + up_enable_irq(STM32_IRQ_WWDG); + } + else + { + /* Detaching... Disable the EWI interrupt */ + + regval &= ~WWDG_CFR_EWI; + stm32_putreg(regval, STM32_WWDG_CFR); + + up_disable_irq(STM32_IRQ_WWDG); + } + + irqrestore(flags); + return oldhandler; +} + +/**************************************************************************** + * Name: stm32_ioctl + * + * Description: + * Any ioctl commands that are not recognized by the "upper-half" driver + * are forwarded to the lower half driver through this method. + * + * Input Parameters: + * lower - A pointer the publicly visible representation of the "lower-half" + * driver state structure. + * cmd - The ioctol command value + * arg - The optional argument that accompanies the 'cmd'. The + * interpretation of this argument depends on the particular + * command. + * + * Returned Values: + * Zero on success; a negated errno value on failure. + * + ****************************************************************************/ + +static int stm32_ioctl(FAR struct watchdog_lowerhalf_s *lower, int cmd, + unsigned long arg) +{ + FAR struct stm32_lowerhalf_s *priv = (FAR struct stm32_lowerhalf_s *)lower; + int ret = -ENOTTY; + + DEBUGASSERT(priv); + wdvdbg("Entry: cmd=%d arg=%ld\n", cmd, arg); + + /* WDIOC_MINTIME: Set the minimum ping time. If two keepalive ioctls + * are received within this time, a reset event will be generated. + * Argument: A 32-bit time value in milliseconds. + */ + + if (cmd == WDIOC_MINTIME) + { + uint32_t mintime = (uint32_t)arg; + + /* The minimum time should be strictly less than the total delay + * which, in turn, will be less than or equal to WWDG_CR_T_MAX + */ + + ret = -EINVAL; + if (mintime < priv->timeout) + { + uint32_t window = (priv->timeout - mintime) * priv->fwwdg / 1000 - 1; + DEBUGASSERT(window < priv->reload); + stm32_setwindow(priv, window | WWDG_CR_T_RESET); + ret = OK; + } + } + + return ret; +} + +/**************************************************************************** + * Public Functions + ****************************************************************************/ + +/**************************************************************************** + * Name: stm32_wwdginitialize + * + * Description: + * Initialize the WWDG watchdog time. The watchdog timer is intialized and + * registers as 'devpath. The initial state of the watchdog time is + * disabled. + * + * Input Parameters: + * devpath - The full path to the watchdog. This should be of the form + * /dev/watchdog0 + * + * Returned Values: + * None + * + ****************************************************************************/ + +void stm32_wwdginitialize(FAR const char *devpath) +{ + FAR struct stm32_lowerhalf_s *priv = &g_wdgdev; + + wdvdbg("Entry: devpath=%s\n", devpath); + + /* NOTE we assume that clocking to the IWDG has already been provided by + * the RCC initialization logic. + */ + + /* Initialize the driver state structure. Here we assume: (1) the state + * structure lies in .bss and was zeroed at reset time. (2) This function + * is only called once so it is never necessary to re-zero the structure. + */ + + priv->ops = &g_wdgops; + + /* Attach our EWI interrupt handler (But don't enable it yet) */ + + (void)irq_attach(STM32_IRQ_WWDG, stm32_interrupt); + + /* Select an arbitrary initial timeout value. But don't start the watchdog + * yet. NOTE: If the "Hardware watchdog" feature is enabled through the + * device option bits, the watchdog is automatically enabled at power-on. + */ + + stm32_settimeout((FAR struct watchdog_lowerhalf_s *)priv, + CONFIG_STM32_WWDG_DEFTIMOUT); + + /* Register the watchdog driver as /dev/watchdog0 */ + + (void)watchdog_register(devpath, (FAR struct watchdog_lowerhalf_s *)priv); + + /* When the microcontroller enters debug mode (Cortex™-M4F core halted), + * the WWDG counter either continues to work normally or stops, depending + * on DBG_WWDG_STOP configuration bit in DBG module. + */ + +#if defined(CONFIG_STM32_JTAG_FULL_ENABLE) || \ + defined(CONFIG_STM32_JTAG_NOJNTRST_ENABLE) || \ + defined(CONFIG_STM32_JTAG_SW_ENABLE) + { + uint32_t cr = getreg32(STM32_DBGMCU_CR); + cr |= DBGMCU_CR_WWDGSTOP; + putreg32(cr, STM32_DBGMCU_CR); + } +#endif +} + +#endif /* CONFIG_WATCHDOG && CONFIG_STM32_WWDG */ |