diff options
Diffstat (limited to 'nuttx/arch/arm/src/stm32/stm32f20xxx_rcc.c')
-rw-r--r-- | nuttx/arch/arm/src/stm32/stm32f20xxx_rcc.c | 666 |
1 files changed, 666 insertions, 0 deletions
diff --git a/nuttx/arch/arm/src/stm32/stm32f20xxx_rcc.c b/nuttx/arch/arm/src/stm32/stm32f20xxx_rcc.c new file mode 100644 index 000000000..8cfd405de --- /dev/null +++ b/nuttx/arch/arm/src/stm32/stm32f20xxx_rcc.c @@ -0,0 +1,666 @@ +/**************************************************************************** + * arch/arm/src/stm32/stm32f20xxx_rcc.c + * + * Copyright (C) 2012 Gregory Nutt. All rights reserved. + * Author: Gregory Nutt <gnutt@nuttx.org> + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * 3. Neither the name NuttX nor the names of its contributors may be + * used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS + * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE + * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, + * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS + * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED + * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN + * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************/ + +/**************************************************************************** + * Included Files + ****************************************************************************/ + +#include "stm32_pwr.h" + +/* This file supports only the STM32 F2 family (although it is identical to + * the corresponding F4 file). + */ + +/**************************************************************************** + * Definitions + ****************************************************************************/ + +/* Allow up to 100 milliseconds for the high speed clock to become ready. + * that is a very long delay, but if the clock does not become ready we are + * hosed anyway. Normally this is very fast, but I have seen at least one + * board that required this long, long timeout for the HSE to be ready. + */ + +#define HSERDY_TIMEOUT (100 * CONFIG_BOARD_LOOPSPERMSEC) + +/**************************************************************************** + * Private Data + ****************************************************************************/ + +/**************************************************************************** + * Private Functions + ****************************************************************************/ + +/**************************************************************************** + * Name: rcc_reset + * + * Description: + * Reset the RCC clock configuration to the default reset state + * + ****************************************************************************/ + +static inline void rcc_reset(void) +{ + uint32_t regval; + + /* Enable the Internal High Speed clock (HSI) */ + + regval = getreg32(STM32_RCC_CR); + regval |= RCC_CR_HSION; + putreg32(regval, STM32_RCC_CR); + + /* Reset CFGR register */ + + putreg32(0x00000000, STM32_RCC_CFGR); + + /* Reset HSEON, CSSON and PLLON bits */ + + regval = getreg32(STM32_RCC_CR); + regval &= ~(RCC_CR_HSEON|RCC_CR_CSSON|RCC_CR_PLLON); + putreg32(regval, STM32_RCC_CR); + + /* Reset PLLCFGR register to reset default */ + + putreg32(RCC_PLLCFG_RESET, STM32_RCC_PLLCFG); + + /* Reset HSEBYP bit */ + + regval = getreg32(STM32_RCC_CR); + regval &= ~RCC_CR_HSEBYP; + putreg32(regval, STM32_RCC_CR); + + /* Disable all interrupts */ + + putreg32(0x00000000, STM32_RCC_CIR); +} + +/**************************************************************************** + * Name: rcc_enableahb1 + * + * Description: + * Enable selected AHB1 peripherals + * + ****************************************************************************/ + +static inline void rcc_enableahb1(void) +{ + uint32_t regval; + + /* Set the appropriate bits in the AHB1ENR register to enabled the + * selected AHB1 peripherals. + */ + + regval = getreg32(STM32_RCC_AHB1ENR); + + /* Enable GPIOA, GPIOB, .... GPIOI*/ + +#if STM32_NGPIO > 0 + regval |= (RCC_AHB1ENR_GPIOAEN +#if STM32_NGPIO > 16 + |RCC_AHB1ENR_GPIOBEN +#endif +#if STM32_NGPIO > 32 + |RCC_AHB1ENR_GPIOCEN +#endif +#if STM32_NGPIO > 48 + |RCC_AHB1ENR_GPIODEN +#endif +#if STM32_NGPIO > 64 + |RCC_AHB1ENR_GPIOEEN +#endif +#if STM32_NGPIO > 80 + |RCC_AHB1ENR_GPIOFEN +#endif +#if STM32_NGPIO > 96 + |RCC_AHB1ENR_GPIOGEN +#endif +#if STM32_NGPIO > 112 + |RCC_AHB1ENR_GPIOHEN +#endif +#if STM32_NGPIO > 128 + |RCC_AHB1ENR_GPIOIEN +#endif + ); +#endif + +#ifdef CONFIG_STM32_CRC + /* CRC clock enable */ + + regval |= RCC_AHB1ENR_CRCEN; +#endif + +#ifdef CONFIG_STM32_BKPSRAM + /* Backup SRAM clock enable */ + + regval |= RCC_AHB1ENR_BKPSRAMEN; +#endif + +#ifdef CONFIG_STM32_DMA1 + /* DMA 1 clock enable */ + + regval |= RCC_AHB1ENR_DMA1EN; +#endif + +#ifdef CONFIG_STM32_DMA2 + /* DMA 2 clock enable */ + + regval |= RCC_AHB1ENR_DMA2EN; +#endif + +#ifdef CONFIG_STM32_ETHMAC + /* Ethernet MAC clocking */ + + regval |= (RCC_AHB1ENR_ETHMACEN|RCC_AHB1ENR_ETHMACTXEN|RCC_AHB1ENR_ETHMACRXEN); + +#ifdef CONFIG_STM32_ETH_PTP + /* Precision Time Protocol (PTP) */ + + regval |= RCC_AHB1ENR_ETHMACPTPEN; + +#endif +#endif + +#ifdef CONFIG_STM32_OTGHS + /* USB OTG HS */ + + regval |= (RCC_AHB1ENR_OTGHSEN|RCC_AHB1ENR_OTGHSULPIEN); +#endif + + putreg32(regval, STM32_RCC_AHB1ENR); /* Enable peripherals */ +} + +/**************************************************************************** + * Name: rcc_enableahb2 + * + * Description: + * Enable selected AHB2 peripherals + * + ****************************************************************************/ + +static inline void rcc_enableahb2(void) +{ + uint32_t regval; + + /* Set the appropriate bits in the AHB2ENR register to enabled the + * selected AHB2 peripherals. + */ + + regval = getreg32(STM32_RCC_AHB2ENR); + +#ifdef CONFIG_STM32_DCMI + /* Camera interface enable */ + + regval |= RCC_AHB2ENR_DCMIEN; +#endif + +#ifdef CONFIG_STM32_CRYP + /* Cryptographic modules clock enable */ + + regval |= RCC_AHB2ENR_CRYPEN; +#endif + +#ifdef CONFIG_STM32_HASH + /* Hash modules clock enable */ + + regval |= RCC_AHB2ENR_HASHEN; +#endif + +#ifdef CONFIG_STM32_RNG + /* Random number generator clock enable */ + + regval |= RCC_AHB2ENR_RNGEN; +#endif + +#ifdef CONFIG_STM32_OTGFS + /* USB OTG FS clock enable */ + + regval |= RCC_AHB2ENR_OTGFSEN; +#endif + + putreg32(regval, STM32_RCC_AHB2ENR); /* Enable peripherals */ +} + +/**************************************************************************** + * Name: rcc_enableahb3 + * + * Description: + * Enable selected AHB3 peripherals + * + ****************************************************************************/ + +static inline void rcc_enableahb3(void) +{ +#ifdef CONFIG_STM32_FSMC + uint32_t regval; + + /* Set the appropriate bits in the AHB3ENR register to enabled the + * selected AHB3 peripherals. + */ + + regval = getreg32(STM32_RCC_AHB3ENR); + + /* Flexible static memory controller module clock enable */ + + regval |= RCC_AHB3ENR_FSMCEN; + + putreg32(regval, STM32_RCC_AHB3ENR); /* Enable peripherals */ +#endif +} + +/**************************************************************************** + * Name: rcc_enableapb1 + * + * Description: + * Enable selected APB1 peripherals + * + ****************************************************************************/ + +static inline void rcc_enableapb1(void) +{ + uint32_t regval; + + /* Set the appropriate bits in the APB1ENR register to enabled the + * selected APB1 peripherals. + */ + + regval = getreg32(STM32_RCC_APB1ENR); + +#ifdef CONFIG_STM32_TIM2 + /* TIM2 clock enable */ + + regval |= RCC_APB1ENR_TIM2EN; +#endif + +#ifdef CONFIG_STM32_TIM3 + /* TIM3 clock enable */ + + regval |= RCC_APB1ENR_TIM3EN; +#endif + +#ifdef CONFIG_STM32_TIM4 + /* TIM4 clock enable */ + + regval |= RCC_APB1ENR_TIM4EN; +#endif + +#ifdef CONFIG_STM32_TIM5 + /* TIM5 clock enable */ + + regval |= RCC_APB1ENR_TIM5EN; +#endif + +#ifdef CONFIG_STM32_TIM6 + /* TIM6 clock enable */ + + regval |= RCC_APB1ENR_TIM6EN; +#endif + +#ifdef CONFIG_STM32_TIM7 + /* TIM7 clock enable */ + + regval |= RCC_APB1ENR_TIM7EN; +#endif + +#ifdef CONFIG_STM32_TIM12 + /* TIM12 clock enable */ + + regval |= RCC_APB1ENR_TIM12EN; +#endif + +#ifdef CONFIG_STM32_TIM13 + /* TIM13 clock enable */ + + regval |= RCC_APB1ENR_TIM13EN; +#endif + +#ifdef CONFIG_STM32_TIM14 + /* TIM14 clock enable */ + + regval |= RCC_APB1ENR_TIM14EN; +#endif + +#ifdef CONFIG_STM32_WWDG + /* Window watchdog clock enable */ + + regval |= RCC_APB1ENR_WWDGEN; +#endif + +#ifdef CONFIG_STM32_SPI2 + /* SPI2 clock enable */ + + regval |= RCC_APB1ENR_SPI2EN; +#endif + +#ifdef CONFIG_STM32_SPI3 + /* SPI3 clock enable */ + + regval |= RCC_APB1ENR_SPI3EN; +#endif + +#ifdef CONFIG_STM32_USART2 + /* USART 2 clock enable */ + + regval |= RCC_APB1ENR_USART2EN; +#endif + +#ifdef CONFIG_STM32_USART3 + /* USART3 clock enable */ + + regval |= RCC_APB1ENR_USART3EN; +#endif + +#ifdef CONFIG_STM32_UART4 + /* UART4 clock enable */ + + regval |= RCC_APB1ENR_UART4EN; +#endif + +#ifdef CONFIG_STM32_UART5 + /* UART5 clock enable */ + + regval |= RCC_APB1ENR_UART5EN; +#endif + +#ifdef CONFIG_STM32_I2C1 + /* I2C1 clock enable */ + + regval |= RCC_APB1ENR_I2C1EN; +#endif + +#ifdef CONFIG_STM32_I2C2 + /* I2C2 clock enable */ + + regval |= RCC_APB1ENR_I2C2EN; +#endif + +#ifdef CONFIG_STM32_I2C3 + /* I2C3 clock enable */ + + regval |= RCC_APB1ENR_I2C3EN; +#endif + +#ifdef CONFIG_STM32_CAN1 + /* CAN 1 clock enable */ + + regval |= RCC_APB1ENR_CAN1EN; +#endif + +#ifdef CONFIG_STM32_CAN2 + /* CAN2 clock enable. NOTE: CAN2 needs CAN1 clock as well. */ + + regval |= (RCC_APB1ENR_CAN1EN | RCC_APB1ENR_CAN2EN); +#endif + + /* Power interface clock enable. The PWR block is always enabled so that + * we can set the internal voltage regulator for maximum performance. + */ + + regval |= RCC_APB1ENR_PWREN; + +#if defined (CONFIG_STM32_DAC1) || defined(CONFIG_STM32_DAC2) + /* DAC interface clock enable */ + + regval |= RCC_APB1ENR_DACEN; +#endif + + putreg32(regval, STM32_RCC_APB1ENR); /* Enable peripherals */ +} + +/**************************************************************************** + * Name: rcc_enableapb2 + * + * Description: + * Enable selected APB2 peripherals + * + ****************************************************************************/ + +static inline void rcc_enableapb2(void) +{ + uint32_t regval; + + /* Set the appropriate bits in the APB2ENR register to enabled the + * selected APB2 peripherals. + */ + + regval = getreg32(STM32_RCC_APB2ENR); + +#ifdef CONFIG_STM32_TIM1 + /* TIM1 clock enable */ + + regval |= RCC_APB2ENR_TIM1EN; +#endif + +#ifdef CONFIG_STM32_TIM8 + /* TIM8 clock enable */ + + regval |= RCC_APB2ENR_TIM8EN; +#endif + +#ifdef CONFIG_STM32_USART1 + /* USART1 clock enable */ + + regval |= RCC_APB2ENR_USART1EN; +#endif + +#ifdef CONFIG_STM32_USART6 + /* USART6 clock enable */ + + regval |= RCC_APB2ENR_USART6EN; +#endif + +#ifdef CONFIG_STM32_ADC1 + /* ADC1 clock enable */ + + regval |= RCC_APB2ENR_ADC1EN; +#endif + +#ifdef CONFIG_STM32_ADC2 + /* ADC2 clock enable */ + + regval |= RCC_APB2ENR_ADC2EN; +#endif + +#ifdef CONFIG_STM32_ADC3 + /* ADC3 clock enable */ + + regval |= RCC_APB2ENR_ADC3EN; +#endif + +#ifdef CONFIG_STM32_SDIO + /* SDIO clock enable */ + + regval |= RCC_APB2ENR_SDIOEN; +#endif + +#ifdef CONFIG_STM32_SPI1 + /* SPI1 clock enable */ + + regval |= RCC_APB2ENR_SPI1EN; +#endif + +#ifdef CONFIG_STM32_SYSCFG + /* System configuration controller clock enable */ + + regval |= RCC_APB2ENR_SYSCFGEN; +#endif + +#ifdef CONFIG_STM32_TIM9 + /* TIM9 clock enable */ + + regval |= RCC_APB2ENR_TIM9EN; +#endif + +#ifdef CONFIG_STM32_TIM10 + /* TIM10 clock enable */ + + regval |= RCC_APB2ENR_TIM10EN; +#endif + +#ifdef CONFIG_STM32_TIM11 + /* TIM11 clock enable */ + + regval |= RCC_APB2ENR_TIM11EN; +#endif + + putreg32(regval, STM32_RCC_APB2ENR); /* Enable peripherals */ +} + +/**************************************************************************** + * Name: stm32_stdclockconfig + * + * Description: + * Called to change to new clock based on settings in board.h + * + * NOTE: This logic would need to be extended if you need to select low- + * power clocking modes! + ****************************************************************************/ + +#ifndef CONFIG_ARCH_BOARD_STM32_CUSTOM_CLOCKCONFIG +static void stm32_stdclockconfig(void) +{ + uint32_t regval; + volatile int32_t timeout; + + /* Enable External High-Speed Clock (HSE) */ + + regval = getreg32(STM32_RCC_CR); + regval |= RCC_CR_HSEON; /* Enable HSE */ + putreg32(regval, STM32_RCC_CR); + + /* Wait until the HSE is ready (or until a timeout elapsed) */ + + for (timeout = HSERDY_TIMEOUT; timeout > 0; timeout--) + { + /* Check if the HSERDY flag is the set in the CR */ + + if ((getreg32(STM32_RCC_CR) & RCC_CR_HSERDY) != 0) + { + /* If so, then break-out with timeout > 0 */ + + break; + } + } + + /* Check for a timeout. If this timeout occurs, then we are hosed. We + * have no real back-up plan, although the following logic makes it look + * as though we do. + */ + + if (timeout > 0) + { + /* Select regulator voltage output Scale 1 mode to support system + * frequencies up to 168 MHz. + */ + + regval = getreg32(STM32_RCC_APB1ENR); + regval |= RCC_APB1ENR_PWREN; + putreg32(regval, STM32_RCC_APB1ENR); + + regval = getreg32(STM32_PWR_CR); + regval |= PWR_CR_VOS; + putreg32(regval, STM32_PWR_CR); + + /* Set the HCLK source/divider */ + + regval = getreg32(STM32_RCC_CFGR); + regval &= ~RCC_CFGR_HPRE_MASK; + regval |= STM32_RCC_CFGR_HPRE; + putreg32(regval, STM32_RCC_CFGR); + + /* Set the PCLK2 divider */ + + regval = getreg32(STM32_RCC_CFGR); + regval &= ~RCC_CFGR_PPRE2_MASK; + regval |= STM32_RCC_CFGR_PPRE2; + putreg32(regval, STM32_RCC_CFGR); + + /* Set the PCLK1 divider */ + + regval = getreg32(STM32_RCC_CFGR); + regval &= ~RCC_CFGR_PPRE1_MASK; + regval |= STM32_RCC_CFGR_PPRE1; + putreg32(regval, STM32_RCC_CFGR); + + /* Set the PLL dividers and multiplers to configure the main PLL */ + + regval = (STM32_PLLCFG_PLLM | STM32_PLLCFG_PLLN |STM32_PLLCFG_PLLP | + RCC_PLLCFG_PLLSRC_HSE | STM32_PLLCFG_PPQ); + putreg32(regval, STM32_RCC_PLLCFG); + + /* Enable the main PLL */ + + regval = getreg32(STM32_RCC_CR); + regval |= RCC_CR_PLLON; + putreg32(regval, STM32_RCC_CR); + + /* Wait until the PLL is ready */ + + while ((getreg32(STM32_RCC_CR) & RCC_CR_PLLRDY) == 0); + + /* Enable FLASH prefetch, instruction cache, data cache, and 5 wait states */ + + regval = (FLASH_ACR_LATENCY_5 | FLASH_ACR_ICEN | FLASH_ACR_DCEN); + putreg32(regval, STM32_FLASH_ACR); + + /* Select the main PLL as system clock source */ + + regval = getreg32(STM32_RCC_CFGR); + regval &= ~RCC_CFGR_SW_MASK; + regval |= RCC_CFGR_SW_PLL; + putreg32(regval, STM32_RCC_CFGR); + + /* Wait until the PLL source is used as the system clock source */ + + while ((getreg32(STM32_RCC_CFGR) & RCC_CFGR_SWS_MASK) != RCC_CFGR_SWS_PLL); + } +} +#endif + +/**************************************************************************** + * Name: rcc_enableperiphals + ****************************************************************************/ + +static inline void rcc_enableperipherals(void) +{ + rcc_enableahb1(); + rcc_enableahb2(); + rcc_enableahb3(); + rcc_enableapb1(); + rcc_enableapb2(); +} + +/**************************************************************************** + * Public Functions + ****************************************************************************/ |