diff options
Diffstat (limited to 'nuttx/configs/px4io/src/up_boardinitialize.c')
-rw-r--r-- | nuttx/configs/px4io/src/up_boardinitialize.c | 178 |
1 files changed, 178 insertions, 0 deletions
diff --git a/nuttx/configs/px4io/src/up_boardinitialize.c b/nuttx/configs/px4io/src/up_boardinitialize.c new file mode 100644 index 000000000..f6900ebb5 --- /dev/null +++ b/nuttx/configs/px4io/src/up_boardinitialize.c @@ -0,0 +1,178 @@ +/**************************************************************************** + * + * Copyright (C) 2012 PX4 Development Team. All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * 3. Neither the name PX4 nor the names of its contributors may be + * used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS + * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE + * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, + * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS + * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED + * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN + * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************/ + +/** + * @file Board initialisation and configuration data. + */ + +/**************************************************************************** + * Included Files + ****************************************************************************/ + +#include <nuttx/config.h> + +#include <stdbool.h> +#include <stdio.h> +#include <debug.h> +#include <errno.h> + +#include <arch/board/board.h> +#include <arch/board/up_boardinitialize.h> +#include <arch/board/up_hrt.h> +#include <arch/board/drv_pwm_servo.h> +#include <arch/board/drv_gpio.h> + +#include "chip.h" +#include "up_internal.h" +#include "up_arch.h" + +#include "stm32_internal.h" +#include "stm32_gpio.h" +#include "stm32_tim.h" + +/**************************************************************************** + * Pre-Processor Definitions + ****************************************************************************/ + +/* Debug ********************************************************************/ + +/* Configuration ************************************************************/ + +#if CONFIG_PWM_SERVO + /* + * Servo configuration for the PX4IO board. + */ + static const struct pwm_servo_config servo_config = { + .update_rate = 50, + .timers = { + { + .base = STM32_TIM2_BASE, + .clock_register = STM32_RCC_APB1ENR, + .clock_bit = RCC_APB1ENR_TIM2EN, + .clock_freq = STM32_APB1_TIM2_CLKIN + }, + { + .base = STM32_TIM3_BASE, + .clock_register = STM32_RCC_APB1ENR, + .clock_bit = RCC_APB1ENR_TIM3EN, + .clock_freq = STM32_APB1_TIM3_CLKIN + }, + { + .base = STM32_TIM4_BASE, + .clock_register = STM32_RCC_APB1ENR, + .clock_bit = RCC_APB1ENR_TIM4EN, + .clock_freq = STM32_APB1_TIM4_CLKIN + }, + }, + .channels = { + { + .gpio = GPIO_TIM2_CH1OUT, + .timer_index = 0, + .timer_channel = 1, + .default_value = 1000, + }, + { + .gpio = GPIO_TIM2_CH2OUT, + .timer_index = 0, + .timer_channel = 2, + .default_value = 1000, + }, + { + .gpio = GPIO_TIM4_CH3OUT, + .timer_index = 2, + .timer_channel = 3, + .default_value = 1000, + }, + { + .gpio = GPIO_TIM4_CH4OUT, + .timer_index = 2, + .timer_channel = 4, + .default_value = 1000, + }, + { + .gpio = GPIO_TIM3_CH1OUT, + .timer_index = 1, + .timer_channel = 1, + .default_value = 1000, + }, + { + .gpio = GPIO_TIM3_CH2OUT, + .timer_index = 1, + .timer_channel = 2, + .default_value = 1000, + }, + { + .gpio = GPIO_TIM3_CH3OUT, + .timer_index = 1, + .timer_channel = 3, + .default_value = 1000, + }, + { + .gpio = GPIO_TIM3_CH4OUT, + .timer_index = 1, + .timer_channel = 4, + .default_value = 1000, + }, + } + }; +#endif + +/**************************************************************************** + * Public Functions + ****************************************************************************/ + +/**************************************************************************** + * Name: nsh_archinitialize + * + * Description: + * Perform architecture specific initialization + * + ****************************************************************************/ + +int up_boardinitialize() +{ + /* configure the high-resolution time/callout interface */ +#ifdef CONFIG_HRT_TIMER + hrt_init(CONFIG_HRT_TIMER); +#endif + + /* configure the PWM servo driver */ +#if CONFIG_PWM_SERVO + pwm_servo_init(&servo_config); +#endif + + /* configure the GPIO driver */ + gpio_drv_init(); + + return OK; +} |