diff options
Diffstat (limited to 'nuttx/drivers/lcd/ssd1289.c')
-rw-r--r-- | nuttx/drivers/lcd/ssd1289.c | 1279 |
1 files changed, 1279 insertions, 0 deletions
diff --git a/nuttx/drivers/lcd/ssd1289.c b/nuttx/drivers/lcd/ssd1289.c new file mode 100644 index 000000000..58c606968 --- /dev/null +++ b/nuttx/drivers/lcd/ssd1289.c @@ -0,0 +1,1279 @@ +/************************************************************************************** + * drivers/lcd/ssd1289.c + * + * Generic LCD driver for LCDs based on the Solomon Systech SSD1289 LCD controller. + * Think of this as a template for an LCD driver that you will proably ahve to + * customize for any particular LCD hardware. + * + * Copyright (C) 2012 Gregory Nutt. All rights reserved. + * Authors: Gregory Nutt <gnutt@nuttx.org> + * + * References: SSD1289, Rev 1.3, Apr 2007, Solomon Systech Limited + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * 3. Neither the name NuttX nor the names of its contributors may be + * used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS + * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE + * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, + * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS + * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED + * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN + * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + * + **************************************************************************************/ + +/************************************************************************************** + * Included Files + **************************************************************************************/ + +#include <nuttx/config.h> + +#include <sys/types.h> +#include <stdint.h> +#include <stdbool.h> +#include <string.h> +#include <errno.h> +#include <debug.h> + +#include <nuttx/arch.h> +#include <nuttx/spi.h> +#include <nuttx/lcd/lcd.h> +#include <nuttx/lcd/ssd1289.h> + +#include "ssd1289.h" + +#ifdef CONFIG_LCD_SSD1289 + +/************************************************************************************** + * Pre-processor Definitions + **************************************************************************************/ +/* Configuration **********************************************************************/ + +/* Check contrast selection */ + +#if !defined(CONFIG_LCD_MAXCONTRAST) +# define CONFIG_LCD_MAXCONTRAST 1 +#endif + +/* Check power setting */ + +#if !defined(CONFIG_LCD_MAXPOWER) || CONFIG_LCD_MAXPOWER < 1 +# define CONFIG_LCD_MAXPOWER 1 +#endif + +#if CONFIG_LCD_MAXPOWER > 255 +# error "CONFIG_LCD_MAXPOWER must be less than 256 to fit in uint8_t" +#endif + +/* Check orientation */ + +#if defined(CONFIG_LCD_PORTRAIT) +# if defined(CONFIG_LCD_LANDSCAPE) || defined(CONFIG_LCD_RLANDSCAPE) || defined(CONFIG_LCD_RPORTRAIT) +# error "Cannot define both portrait and any other orientations" +# endif +#elif defined(CONFIG_LCD_RPORTRAIT) +# if defined(CONFIG_LCD_LANDSCAPE) || defined(CONFIG_LCD_RLANDSCAPE) +# error "Cannot define both rportrait and any other orientations" +# endif +#elif defined(CONFIG_LCD_LANDSCAPE) +# ifdef CONFIG_LCD_RLANDSCAPE +# error "Cannot define both landscape and any other orientations" +# endif +#elif !defined(CONFIG_LCD_RLANDSCAPE) +# define CONFIG_LCD_LANDSCAPE 1 +#endif + +/* Define CONFIG_DEBUG_LCD to enable detailed LCD debug output. Verbose debug must + * also be enabled. + */ + +#ifndef CONFIG_DEBUG +# undef CONFIG_DEBUG_VERBOSE +# undef CONFIG_DEBUG_GRAPHICS +# undef CONFIG_DEBUG_LCD +#endif + +#ifndef CONFIG_DEBUG_VERBOSE +# undef CONFIG_DEBUG_LCD +#endif + +/* Display/Color Properties ***********************************************************/ +/* Display Resolution */ + +#if defined(CONFIG_LCD_LANDSCAPE) || defined(CONFIG_LCD_RLANDSCAPE) +# define SSD1289_XRES 320 +# define SSD1289_YRES 240 +#else +# define SSD1289_XRES 240 +# define SSD1289_YRES 320 +#endif + +/* Color depth and format */ + +#define SSD1289_BPP 16 +#define SSD1289_COLORFMT FB_FMT_RGB16_565 + +/* LCD Profiles ***********************************************************************/ +/* Many details of the controller initialization must, unfortunately, vary from LCD to + * LCD. I have looked at the spec and at three different drivers for LCDs that have + * SSD1289 controllers. I have tried to summarize these differences as "LCD profiles" + * + * Most of the differences between LCDs are nothing more than a few minor bit + * settings. The most significant difference betwen LCD drivers in is the + * manner in which the LCD is powered up and in how the power controls are set. + * My suggestion is that if you have working LCD initialization code, you should + * simply replace the code in ssd1289_hwinitialize with your working code. + */ + +#if defined (CONFIG_SSD1289_PROFILE2) +# undef SSD1289_USE_SIMPLE_INIT + + /* PWRCTRL1: AP=smalll-to-medium, DC=Flinex24, BT=+5/-4, DCT=Flinex24 */ + +# define PWRCTRL1_SETTING \ + (SSD1289_PWRCTRL1_AP_SMMED | SSD1289_PWRCTRL1_DC_FLINEx24 | \ + SSD1289_PWRCTRL1_BT_p5m4 | SSD1289_PWRCTRL1_DCT_FLINEx24) + + /* PWRCTRL2: 5.1v */ + +# define PWRCTRL2_SETTING SSD1289_PWRCTRL2_VRC_5p1V + + /* PWRCTRL3: x 2.165 + * NOTE: Many drivers have bit 8 set which is not defined in the SSD1289 spec. + */ + +# define PWRCTRL3_SETTING SSD1289_PWRCTRL3_VRH_x2p165 + + /* PWRCTRL4: VDV=9 + VCOMG */ + +# define PWRCTRL4_SETTING (SSD1289_PWRCTRL4_VDV(9) | SSD1289_PWRCTRL4_VCOMG) + + /* PWRCTRL5: VCM=56 + NOTP */ + +# define PWRCTRL5_SETTING (SSD1289_PWRCTRL5_VCM(56) | SSD1289_PWRCTRL5_NOTP) + +#elif defined (CONFIG_SSD1289_PROFILE3) +# undef SSD1289_USE_SIMPLE_INIT + + /* PWRCTRL1: AP=smalll-to-medium, DC=Flinex24, BT=+5/-4, DCT=Flinex24 */ + +# define PWRCTRL1_SETTING \ + (SSD1289_PWRCTRL1_AP_SMMED | SSD1289_PWRCTRL1_DC_FLINEx24 | \ + SSD1289_PWRCTRL1_BT_p5m4 | SSD1289_PWRCTRL1_DCT_FLINEx24) + + /* PWRCTRL2: 5.1v */ + +# define PWRCTRL2_SETTING SSD1289_PWRCTRL2_VRC_5p1V + + /* PWRCTRL3: x 2.165 + * NOTE: Many drivers have bit 8 set which is not defined in the SSD1289 spec. + */ + +# define PWRCTRL3_SETTING SSD1289_PWRCTRL3_VRH_x2p165 + + /* PWRCTRL4: VDV=9 + VCOMG */ + +# define PWRCTRL4_SETTING (SSD1289_PWRCTRL4_VDV(9) | SSD1289_PWRCTRL4_VCOMG) + + /* PWRCTRL5: VCM=56 + NOTP */ + +# define PWRCTRL5_SETTING (SSD1289_PWRCTRL5_VCM(56) | SSD1289_PWRCTRL5_NOTP) + +#else /* if defined (CONFIG_SSD1289_PROFILE1) */ +# undef SSD1289_USE_SIMPLE_INIT +# define SSD1289_USE_SIMPLE_INIT 1 + + /* PWRCTRL1: AP=medium-to-large, DC=Fosc/4, BT=+5/-4, DCT=Fosc/4 */ + +# define PWRCTRL1_SETTING \ + (SSD1289_PWRCTRL1_AP_MEDLG | SSD1289_PWRCTRL1_DC_FOSd4 | \ + SSD1289_PWRCTRL1_BT_p5m4 | SSD1289_PWRCTRL1_DCT_FOSd4) + + /* PWRCTRL2: 5.3v */ + +# define PWRCTRL2_SETTING SSD1289_PWRCTRL2_VRC_5p3V + + /* PWRCTRL3: x 2.570 + * NOTE: Many drivers have bit 8 set which is not defined in the SSD1289 spec. + */ + +# define PWRCTRL3_SETTING SSD1289_PWRCTRL3_VRH_x2p570 + + /* PWRCTRL4: VDV=12 + VCOMG */ + +# define PWRCTRL4_SETTING (SSD1289_PWRCTRL4_VDV(12) | SSD1289_PWRCTRL4_VCOMG) + + /* PWRCTRL5: VCM=60 + NOTP */ + +# define PWRCTRL5_SETTING (SSD1289_PWRCTRL5_VCM(60) | SSD1289_PWRCTRL5_NOTP) + +#endif + +/* Debug ******************************************************************************/ + +#ifdef CONFIG_DEBUG_LCD +# define lcddbg dbg +# define lcdvdbg vdbg +#else +# define lcddbg(x...) +# define lcdvdbg(x...) +#endif + +/************************************************************************************** + * Private Type Definition + **************************************************************************************/ + +/* This structure describes the state of this driver */ + +struct ssd1289_dev_s +{ + /* Publically visible device structure */ + + struct lcd_dev_s dev; + + /* Private LCD-specific information follows */ + + FAR struct ssd1289_lcd_s *lcd; /* The contained platform-specific, LCD interface */ + uint8_t power; /* Current power setting */ + + /* This is working memory allocated by the LCD driver for each LCD device + * and for each color plane. This memory will hold one raster line of data. + * The size of the allocated run buffer must therefore be at least + * (bpp * xres / 8). Actual alignment of the buffer must conform to the + * bitwidth of the underlying pixel type. + * + * If there are multiple planes, they may share the same working buffer + * because different planes will not be operate on concurrently. However, + * if there are multiple LCD devices, they must each have unique run buffers. + */ + + uint16_t runbuffer[SSD1289_XRES]; +}; + +/************************************************************************************** + * Private Function Protototypes + **************************************************************************************/ +/* Low Level LCD access */ + +static void ssd1289_putreg(FAR struct ssd1289_lcd_s *lcd, uint8_t regaddr, + uint16_t regval); +#ifndef CONFIG_LCD_NOGETRUN +static uint16_t ssd1289_readreg(FAR struct ssd1289_lcd_s *lcd, uint8_t regaddr); +#endif +static inline void ssd1289_gramwrite(FAR struct ssd1289_lcd_s *lcd, uint16_t rgbcolor); +#ifndef CONFIG_LCD_NOGETRUN +static inline void ssd1289_readsetup(FAR struct ssd1289_lcd_s *lcd, FAR uint16_t *accum); +static inline uint16_t ssd1289_gramread(FAR struct ssd1289_lcd_s *lcd, FAR uint16_t *accum); +#endif +static void ssd1289_setcursor(FAR struct ssd1289_lcd_s *lcd, uint16_t column, + uint16_t row); + +/* LCD Data Transfer Methods */ + +static int ssd1289_putrun(fb_coord_t row, fb_coord_t col, FAR const uint8_t *buffer, + size_t npixels); +static int ssd1289_getrun(fb_coord_t row, fb_coord_t col, FAR uint8_t *buffer, + size_t npixels); + +/* LCD Configuration */ + +static int ssd1289_getvideoinfo(FAR struct lcd_dev_s *dev, + FAR struct fb_videoinfo_s *vinfo); +static int ssd1289_getplaneinfo(FAR struct lcd_dev_s *dev, unsigned int planeno, + FAR struct lcd_planeinfo_s *pinfo); + +/* LCD RGB Mapping */ + +#ifdef CONFIG_FB_CMAP +# error "RGB color mapping not supported by this driver" +#endif + +/* Cursor Controls */ + +#ifdef CONFIG_FB_HWCURSOR +# error "Cursor control not supported by this driver" +#endif + +/* LCD Specific Controls */ + +static int ssd1289_getpower(FAR struct lcd_dev_s *dev); +static int ssd1289_setpower(FAR struct lcd_dev_s *dev, int power); +static int ssd1289_getcontrast(FAR struct lcd_dev_s *dev); +static int ssd1289_setcontrast(FAR struct lcd_dev_s *dev, unsigned int contrast); + +/* Initialization */ + +static inline int ssd1289_hwinitialize(FAR struct ssd1289_dev_s *priv); + +/************************************************************************************** + * Private Data + **************************************************************************************/ + +/* This driver can support only a signal SSD1289 device. This is due to an + * unfortunate decision made whent he getrun and putrun methods were designed. The + * following is the single SSD1289 driver state instance: + */ + +static struct ssd1289_dev_s g_lcddev; + +/************************************************************************************** + * Private Functions + **************************************************************************************/ + +/************************************************************************************** + * Name: ssd1289_putreg(lcd, + * + * Description: + * Write to an LCD register + * + **************************************************************************************/ + +static void ssd1289_putreg(FAR struct ssd1289_lcd_s *lcd, uint8_t regaddr, uint16_t regval) +{ + /* Set the index register to the register address and write the register contents */ + + lcd->index(lcd, regaddr); + lcd->write(lcd, regval); +} + +/************************************************************************************** + * Name: ssd1289_readreg + * + * Description: + * Read from an LCD register + * + **************************************************************************************/ + +#ifndef CONFIG_LCD_NOGETRUN +static uint16_t ssd1289_readreg(FAR struct ssd1289_lcd_s *lcd, uint8_t regaddr) +{ + /* Set the index register to the register address and read the register contents */ + + lcd->index(lcd, regaddr); + return lcd->read(lcd); +} +#endif + +/************************************************************************************** + * Name: ssd1289_gramselect + * + * Description: + * Setup to read or write multiple pixels to the GRAM memory + * + **************************************************************************************/ + +static inline void ssd1289_gramselect(FAR struct ssd1289_lcd_s *lcd) +{ + lcd->index(lcd, SSD1289_DATA); +} + +/************************************************************************************** + * Name: ssd1289_gramwrite + * + * Description: + * Setup to read or write multiple pixels to the GRAM memory + * + **************************************************************************************/ + +static inline void ssd1289_gramwrite(FAR struct ssd1289_lcd_s *lcd, uint16_t data) +{ + lcd->write(lcd, data); +} + +/************************************************************************************** + * Name: ssd1289_readsetup + * + * Description: + * Prime the operation by reading one pixel from the GRAM memory if necessary for + * this LCD type. When reading 16-bit gram data, there may be some shifts in the + * returned data: + * + * - ILI932x: Discard first dummy read; no shift in the return data + * + **************************************************************************************/ + +#ifndef CONFIG_LCD_NOGETRUN +static inline void ssd1289_readsetup(FAR struct ssd1289_lcd_s *lcd, FAR uint16_t *accum) +{ + /* Read-ahead one pixel */ + + *accum = lcd->read(lcd); +} +#endif + +/************************************************************************************** + * Name: ssd1289_gramread + * + * Description: + * Read one correctly aligned pixel from the GRAM memory. Possibly shifting the + * data and possibly swapping red and green components. + * + * - ILI932x: Unknown -- assuming colors are in the color order + * + **************************************************************************************/ + +#ifndef CONFIG_LCD_NOGETRUN +static inline uint16_t ssd1289_gramread(FAR struct ssd1289_lcd_s *lcd, FAR uint16_t *accum) +{ + /* Read the value (GRAM register already selected) */ + + return lcd->read(lcd); +} +#endif + +/************************************************************************************** + * Name: ssd1289_setcursor + * + * Description: + * Set the cursor position. In landscape mode, the "column" is actually the physical + * Y position and the "row" is the physical X position. + * + **************************************************************************************/ + +static void ssd1289_setcursor(FAR struct ssd1289_lcd_s *lcd, uint16_t column, uint16_t row) +{ +#if defined(CONFIG_LCD_PORTRAIT) || defined(CONFIG_LCD_RPORTRAIT) + ssd1289_putreg(lcd, SSD1289_XADDR, column); /* 0-239 */ + ssd1289_putreg(lcd, SSD1289_YADDR, row); /* 0-319 */ +#elif defined(CONFIG_LCD_LANDSCAPE) || defined(CONFIG_LCD_RLANDSCAPE) + ssd1289_putreg(lcd, SSD1289_XADDR, row); /* 0-239 */ + ssd1289_putreg(lcd, SSD1289_YADDR, column); /* 0-319 */ +#endif +} + +/************************************************************************************** + * Name: ssd1289_dumprun + * + * Description: + * Dump the contexts of the run buffer: + * + * run - The buffer in containing the run read to be dumped + * npixels - The number of pixels to dump + * + **************************************************************************************/ + +#if 0 /* Sometimes useful */ +static void ssd1289_dumprun(FAR const char *msg, FAR uint16_t *run, size_t npixels) +{ + int i, j; + + lib_rawprintf("\n%s:\n", msg); + for (i = 0; i < npixels; i += 16) + { + up_putc(' '); + lib_rawprintf(" "); + for (j = 0; j < 16; j++) + { + lib_rawprintf(" %04x", *run++); + } + up_putc('\n'); + } +} +#endif + +/************************************************************************************** + * Name: ssd1289_putrun + * + * Description: + * This method can be used to write a partial raster line to the LCD: + * + * row - Starting row to write to (range: 0 <= row < yres) + * col - Starting column to write to (range: 0 <= col <= xres-npixels) + * buffer - The buffer containing the run to be written to the LCD + * npixels - The number of pixels to write to the LCD + * (range: 0 < npixels <= xres-col) + * + **************************************************************************************/ + +static int ssd1289_putrun(fb_coord_t row, fb_coord_t col, FAR const uint8_t *buffer, + size_t npixels) +{ + FAR struct ssd1289_dev_s *priv = &g_lcddev; + FAR struct ssd1289_lcd_s *lcd = priv->lcd; + FAR const uint16_t *src = (FAR const uint16_t*)buffer; + int i; + + /* Buffer must be provided and aligned to a 16-bit address boundary */ + + lcdvdbg("row: %d col: %d npixels: %d\n", row, col, npixels); + DEBUGASSERT(buffer && ((uintptr_t)buffer & 1) == 0); + + /* Select the LCD */ + + lcd->select(lcd); + + /* Write the run to GRAM. */ + +#ifdef CONFIG_LCD_LANDSCAPE + /* Convert coordinates -- Here the edge away from the row of buttons on + * the STM3240G-EVAL is used as the top. + */ + + /* Write the GRAM data, manually incrementing X */ + + for (i = 0; i < npixels; i++) + { + /* Write the next pixel to this position */ + + ssd1289_setcursor(lcd, col, row); + ssd1289_gramselect(lcd); + ssd1289_gramwrite(lcd, *src); + + /* Increment to next column */ + + src++; + col++; + } +#elif defined(CONFIG_LCD_RLANDSCAPE) + /* Convert coordinates -- Here the edge next to the row of buttons on + * the STM3240G-EVAL is used as the top. + */ + + col = (SSD1289_XRES-1) - col; + row = (SSD1289_YRES-1) - row; + + /* Set the cursor position */ + + ssd1289_setcursor(lcd, col, row); + + /* Then write the GRAM data, auto-decrementing X */ + + ssd1289_gramselect(lcd); + for (i = 0; i < npixels; i++) + { + /* Write the next pixel to this position (auto-decrements to the next column) */ + + ssd1289_gramwrite(lcd, *src); + src++; + } +#elif defined(CONFIG_LCD_PORTRAIT) + /* Convert coordinates. In this configuration, the top of the display is to the left + * of the buttons (if the board is held so that the buttons are at the botton of the + * board). + */ + + col = (SSD1289_XRES-1) - col; + + /* Then write the GRAM data, manually incrementing Y (which is col) */ + + for (i = 0; i < npixels; i++) + { + /* Write the next pixel to this position */ + + ssd1289_setcursor(lcd, row, col); + ssd1289_gramselect(lcd); + ssd1289_gramwrite(lcd, *src); + + /* Increment to next column */ + + src++; + col--; + } +#else /* CONFIG_LCD_RPORTRAIT */ + /* Convert coordinates. In this configuration, the top of the display is to the right + * of the buttons (if the board is held so that the buttons are at the botton of the + * board). + */ + + row = (SSD1289_YRES-1) - row; + + /* Then write the GRAM data, manually incrementing Y (which is col) */ + + for (i = 0; i < npixels; i++) + { + /* Write the next pixel to this position */ + + ssd1289_setcursor(lcd, row, col); + ssd1289_gramselect(lcd); + ssd1289_gramwrite(lcd, *src); + + /* Decrement to next column */ + + src++; + col++; + } +#endif + + /* De-select the LCD */ + + lcd->deselect(lcd); + return OK; +} + +/************************************************************************************** + * Name: ssd1289_getrun + * + * Description: + * This method can be used to read a partial raster line from the LCD: + * + * row - Starting row to read from (range: 0 <= row < yres) + * col - Starting column to read read (range: 0 <= col <= xres-npixels) + * buffer - The buffer in which to return the run read from the LCD + * npixels - The number of pixels to read from the LCD + * (range: 0 < npixels <= xres-col) + * + **************************************************************************************/ + +static int ssd1289_getrun(fb_coord_t row, fb_coord_t col, FAR uint8_t *buffer, + size_t npixels) +{ +#ifndef CONFIG_LCD_NOGETRUN + FAR struct ssd1289_dev_s *priv = &g_lcddev; + FAR struct ssd1289_lcd_s *lcd = priv->lcd; + FAR uint16_t *dest = (FAR uint16_t*)buffer; + uint16_t accum; + int i; + + /* Buffer must be provided and aligned to a 16-bit address boundary */ + + lcdvdbg("row: %d col: %d npixels: %d\n", row, col, npixels); + DEBUGASSERT(buffer && ((uintptr_t)buffer & 1) == 0); + + /* Select the LCD */ + + lcd->select(lcd); + + /* Read the run from GRAM. */ + +#ifdef CONFIG_LCD_LANDSCAPE + /* Convert coordinates -- Here the edge away from the row of buttons on + * the STM3240G-EVAL is used as the top. + */ + + for (i = 0; i < npixels; i++) + { + /* Read the next pixel from this position */ + + ssd1289_setcursor(lcd, row, col); + ssd1289_gramselect(lcd); + ssd1289_readsetup(lcd, &accum); + *dest++ = ssd1289_gramread(lcd, &accum); + + /* Increment to next column */ + + col++; + } +#elif defined(CONFIG_LCD_RLANDSCAPE) + /* Convert coordinates -- Here the edge next to the row of buttons on + * the STM3240G-EVAL is used as the top. + */ + + col = (SSD1289_XRES-1) - col; + row = (SSD1289_YRES-1) - row; + + /* Set the cursor position */ + + ssd1289_setcursor(lcd, col, row); + + /* Then read the GRAM data, auto-decrementing Y */ + + ssd1289_gramselect(lcd); + + /* Prime the pump for unaligned read data */ + + ssd1289_readsetup(lcd, &accum); + + for (i = 0; i < npixels; i++) + { + /* Read the next pixel from this position (autoincrements to the next row) */ + + *dest++ = ssd1289_gramread(lcd, &accum); + } +#elif defined(CONFIG_LCD_PORTRAIT) + /* Convert coordinates. In this configuration, the top of the display is to the left + * of the buttons (if the board is held so that the buttons are at the botton of the + * board). + */ + + col = (SSD1289_XRES-1) - col; + + /* Then read the GRAM data, manually incrementing Y (which is col) */ + + for (i = 0; i < npixels; i++) + { + /* Read the next pixel from this position */ + + ssd1289_setcursor(lcd, row, col); + ssd1289_gramselect(lcd); + ssd1289_readsetup(lcd, &accum); + *dest++ = ssd1289_gramread(lcd, &accum); + + /* Increment to next column */ + + col--; + } +#else /* CONFIG_LCD_RPORTRAIT */ + /* Convert coordinates. In this configuration, the top of the display is to the right + * of the buttons (if the board is held so that the buttons are at the botton of the + * board). + */ + + row = (SSD1289_YRES-1) - row; + + /* Then write the GRAM data, manually incrementing Y (which is col) */ + + for (i = 0; i < npixels; i++) + { + /* Write the next pixel to this position */ + + ssd1289_setcursor(lcd, row, col); + ssd1289_gramselect(lcd); + ssd1289_readsetup(lcd, &accum); + *dest++ = ssd1289_gramread(lcd, &accum); + + /* Decrement to next column */ + + col++; + } +#endif + + /* De-select the LCD */ + + lcd->deselect(lcd); + return OK; +#else + return -ENOSYS; +#endif +} + +/************************************************************************************** + * Name: ssd1289_getvideoinfo + * + * Description: + * Get information about the LCD video controller configuration. + * + **************************************************************************************/ + +static int ssd1289_getvideoinfo(FAR struct lcd_dev_s *dev, + FAR struct fb_videoinfo_s *vinfo) +{ + DEBUGASSERT(dev && vinfo); + lcdvdbg("fmt: %d xres: %d yres: %d nplanes: 1\n", + SSD1289_COLORFMT, SSD1289_XRES, SSD1289_XRES); + + vinfo->fmt = SSD1289_COLORFMT; /* Color format: RGB16-565: RRRR RGGG GGGB BBBB */ + vinfo->xres = SSD1289_XRES; /* Horizontal resolution in pixel columns */ + vinfo->yres = SSD1289_YRES; /* Vertical resolution in pixel rows */ + vinfo->nplanes = 1; /* Number of color planes supported */ + return OK; +} + +/************************************************************************************** + * Name: ssd1289_getplaneinfo + * + * Description: + * Get information about the configuration of each LCD color plane. + * + **************************************************************************************/ + +static int ssd1289_getplaneinfo(FAR struct lcd_dev_s *dev, unsigned int planeno, + FAR struct lcd_planeinfo_s *pinfo) +{ + FAR struct ssd1289_dev_s *priv = (FAR struct ssd1289_dev_s *)dev; + + DEBUGASSERT(dev && pinfo && planeno == 0); + lcdvdbg("planeno: %d bpp: %d\n", planeno, SSD1289_BPP); + + pinfo->putrun = ssd1289_putrun; /* Put a run into LCD memory */ + pinfo->getrun = ssd1289_getrun; /* Get a run from LCD memory */ + pinfo->buffer = (uint8_t*)priv->runbuffer; /* Run scratch buffer */ + pinfo->bpp = SSD1289_BPP; /* Bits-per-pixel */ + return OK; +} + +/************************************************************************************** + * Name: ssd1289_getpower + * + * Description: + * Get the LCD panel power status (0: full off - CONFIG_LCD_MAXPOWER: full on). On + * backlit LCDs, this setting may correspond to the backlight setting. + * + **************************************************************************************/ + +static int ssd1289_getpower(FAR struct lcd_dev_s *dev) +{ + lcdvdbg("power: %d\n", 0); + return g_lcddev.power; +} + +/************************************************************************************** + * Name: ssd1289_poweroff + * + * Description: + * Enable/disable LCD panel power (0: full off - CONFIG_LCD_MAXPOWER: full on). On + * backlit LCDs, this setting may correspond to the backlight setting. + * + **************************************************************************************/ + +static int ssd1289_poweroff(FAR struct ssd1289_lcd_s *lcd) +{ + /* Set the backlight off */ + + lcd->backlight(lcd, 0); + + /* Turn the display off */ + + ssd1289_putreg(lcd, SSD1289_DSPCTRL, 0); + + /* Remember the power off state */ + + g_lcddev.power = 0; + return OK; +} + +/************************************************************************************** + * Name: ssd1289_setpower + * + * Description: + * Enable/disable LCD panel power (0: full off - CONFIG_LCD_MAXPOWER: full on). On + * backlit LCDs, this setting may correspond to the backlight setting. + * + **************************************************************************************/ + +static int ssd1289_setpower(FAR struct lcd_dev_s *dev, int power) +{ + FAR struct ssd1289_dev_s *priv = (FAR struct ssd1289_dev_s *)dev; + FAR struct ssd1289_lcd_s *lcd = priv->lcd; + + lcdvdbg("power: %d\n", power); + DEBUGASSERT((unsigned)power <= CONFIG_LCD_MAXPOWER); + + /* Set new power level */ + + if (power > 0) + { + /* Set the backlight level */ + + lcd->backlight(lcd, power); + + /* Then turn the display on: + * D=ON(3) CM=0 DTE=1 GON=1 SPT=0 VLE=0 PT=0 + */ + + ssd1289_putreg(lcd, SSD1289_DSPCTRL, + (SSD1289_DSPCTRL_ON | SSD1289_DSPCTRL_GON | + SSD1289_DSPCTRL_DTE | SSD1289_DSPCTRL_VLE(0))); + + g_lcddev.power = power; + } + else + { + /* Turn the display off */ + + ssd1289_poweroff(lcd); + } + + return OK; +} + +/************************************************************************************** + * Name: ssd1289_getcontrast + * + * Description: + * Get the current contrast setting (0-CONFIG_LCD_MAXCONTRAST). + * + **************************************************************************************/ + +static int ssd1289_getcontrast(FAR struct lcd_dev_s *dev) +{ + lcdvdbg("Not implemented\n"); + return -ENOSYS; +} + +/************************************************************************************** + * Name: ssd1289_setcontrast + * + * Description: + * Set LCD panel contrast (0-CONFIG_LCD_MAXCONTRAST). + * + **************************************************************************************/ + +static int ssd1289_setcontrast(FAR struct lcd_dev_s *dev, unsigned int contrast) +{ + lcdvdbg("contrast: %d\n", contrast); + return -ENOSYS; +} + +/************************************************************************************** + * Name: ssd1289_hwinitialize + * + * Description: + * Initialize the LCD hardware. + * + **************************************************************************************/ + +static inline int ssd1289_hwinitialize(FAR struct ssd1289_dev_s *priv) +{ + FAR struct ssd1289_lcd_s *lcd = priv->lcd; +#ifndef CONFIG_LCD_NOGETRUN + uint16_t id; +#endif + + /* Select the LCD */ + + lcd->select(lcd); + +#ifndef CONFIG_LCD_NOGETRUN + id = ssd1289_readreg(lcd, SSD1289_DEVCODE); + lcddbg("LCD ID: %04x\n", id); + + /* Check if the ID is for the SSD1289 */ + + if (id == SSD1289_DEVCODE_VALUE) +#endif + { + /* LCD controller configuration. Many details of the controller initialization + * must, unfortunately, vary from LCD to LCD. I have looked at the spec and at + * three different drivers for LCDs that have SSD1289 controllers. I have tried + * to summarize these differences as profiles (defined above). Some other + * alternatives are noted below. + * + * Most of the differences between LCDs are nothing more than a few minor bit + * settings. The most significant difference betwen LCD drivers in is the + * manner in which the LCD is powered up and in how the power controls are set. + * My suggestion is that if you have working LCD initialization code, you should + * simply replace the following guesses with your working code. + */ + + /* Most drivers just enable the oscillator */ + +#ifdef SSD1289_USE_SIMPLE_INIT + ssd1289_putreg(lcd, SSD1289_OSCSTART, SSD1289_OSCSTART_OSCEN); +#else + /* But one goes through a more complex start-up sequence. Something like the + * following: + * + * First, put the display in INTERNAL operation: + * D=INTERNAL(1) CM=0 DTE=0 GON=1 SPT=0 VLE=0 PT=0 + */ + + ssd1289_putreg(lcd, SSD1289_DSPCTRL, + (SSD1289_DSPCTRL_INTERNAL | SSD1289_DSPCTRL_GON | + SSD1289_DSPCTRL_VLE(0))); + + /* Then enable the oscillator */ + + ssd1289_putreg(lcd, SSD1289_OSCSTART, SSD1289_OSCSTART_OSCEN); + + /* Turn the display on: + * D=ON(3) CM=0 DTE=0 GON=1 SPT=0 VLE=0 PT=0 + */ + + ssd1289_putreg(lcd, SSD1289_DSPCTRL, + (SSD1289_DSPCTRL_ON | SSD1289_DSPCTRL_GON | + SSD1289_DSPCTRL_VLE(0))); + + /* Take the LCD out of sleep mode */ + + ssd1289_putreg(lcd, SSD1289_SLEEP, 0); + up_mdelay(30); + + /* Turn the display on: + * D=INTERNAL(1) CM=0 DTE=1 GON=1 SPT=0 VLE=0 PT=0 + */ + + ssd1289_putreg(lcd, SSD1289_DSPCTRL, + (SSD1289_DSPCTRL_ON | SSD1289_DSPCTRL_DTE | + SSD1289_DSPCTRL_GON | SSD1289_DSPCTRL_VLE(0))); +#endif + + /* Set up power control registers. There is a lot of variability + * from LCD-to-LCD in how the power registers are configured. + */ + + ssd1289_putreg(lcd, SSD1289_PWRCTRL1, PWRCTRL1_SETTING); + ssd1289_putreg(lcd, SSD1289_PWRCTRL2, PWRCTRL2_SETTING); + + /* One driver adds a delay here.. I doubt that this is really necessary. */ + /* up_mdelay(15); */ + + ssd1289_putreg(lcd, SSD1289_PWRCTRL3, PWRCTRL3_SETTING); + ssd1289_putreg(lcd, SSD1289_PWRCTRL4, PWRCTRL4_SETTING); + ssd1289_putreg(lcd, SSD1289_PWRCTRL5, PWRCTRL5_SETTING); + + /* One driver does an odd setting of the the driver output control. + * No idea why. + */ +#if 0 + ssd1289_putreg(lcd, SSD1289_OUTCTRL, + (SSD1289_OUTCTRL_MUX(12) | SSD1289_OUTCTRL_TB | + SSD1289_OUTCTRL_BGR | SSD1289_OUTCTRL_CAD)); + + /* The same driver does another small delay here */ + + up_mdelay(15); +#endif + + /* After this point, the drivers differ only in some varying register + * bit settings. + */ + + /* Set the driver output control. + * PORTRAIT MODES: + * MUX=319, TB=1, SM=0, BGR=1, CAD=0, REV=1, RL=0 + * LANDSCAPE MODES: + * MUX=319, TB=0, SM=0, BGR=1, CAD=0, REV=1, RL=0 + */ + +#if defined(CONFIG_LCD_PORTRAIT) || defined(CONFIG_LCD_RPORTRAIT) + ssd1289_putreg(lcd, SSD1289_OUTCTRL, + (SSD1289_OUTCTRL_MUX(319) | SSD1289_OUTCTRL_TB | + SSD1289_OUTCTRL_BGR | SSD1289_OUTCTRL_REV); +#else + ssd1289_putreg(lcd, SSD1289_OUTCTRL, + (SSD1289_OUTCTRL_MUX(319) | SSD1289_OUTCTRL_BGR | + SSD1289_OUTCTRL_REV)); +#endif + + /* Set the LCD driving AC waveform + * NW=0, WSMD=0, EOR=1, BC=1, ENWD=0, FLD=0 + */ + + ssd1289_putreg(lcd, SSD1289_ACCTRL, + (SSD1289_ACCTRL_EOR | SSD1289_ACCTRL_BC)); + + /* Take the LCD out of sleep mode (isn't this redundant in the non- + * simple case?) + */ + + ssd1289_putreg(lcd, SSD1289_SLEEP, 0); + + /* Set entry mode */ + +#if defined(CONFIG_LCD_PORTRAIT) || defined(CONFIG_LCD_RPORTRAIT) + /* LG=0, AM=0, ID=3, TY=2, DMODE=0, WMODE=0, OEDEF=0, TRANS=0, DRM=3 + * Alternative TY=2 (But TY only applies in 262K color mode anyway) + */ + + ssd1289_putreg(lcd, SSD1289_ENTRY, + (SSD1289_ENTRY_ID_HINCVINC | SSD1289_ENTRY_TY_C | + SSD1289_ENTRY_DMODE_RAM | SSD1289_ENTRY_DFM_65K)); +#else + /* LG=0, AM=1, ID=3, TY=2, DMODE=0, WMODE=0, OEDEF=0, TRANS=0, DRM=3 */ + /* Alternative TY=2 (But TY only applies in 262K color mode anyway) */ + + ssd1289_putreg(lcd, SSD1289_ENTRY, + (SSD1289_ENTRY_AM | SSD1289_ENTRY_ID_HINCVINC | + SSD1289_ENTRY_TY_C | SSD1289_ENTRY_DMODE_RAM | + SSD1289_ENTRY_DFM_65K)); +#endif + + /* Clear compare registers */ + + ssd1289_putreg(lcd, SSD1289_CMP1, 0); + ssd1289_putreg(lcd, SSD1289_CMP2, 0); + + /* One driver puts a huge, 100 millisecond delay here */ + /* up_mdelay(100); */ + + /* Set Horizontal and vertical porch. + * Horizontal porch: 239 pixels per line, delay=28 + * Vertical porch: VBP=3, XFP=0 + */ + + ssd1289_putreg(lcd, SSD1289_HPORCH, + (28 << SSD1289_HPORCH_HBP_SHIFT) | (239 << SSD1289_HPORCH_XL_SHIFT)); + ssd1289_putreg(lcd, SSD1289_VPORCH, + (3 << SSD1289_VPORCH_VBP_SHIFT) | (0 << SSD1289_VPORCH_XFP_SHIFT)); + + /* Set display control. + * D=ON(3), CM=0 (not 8-color), DTE=1, GON=1, SPT=0, VLE=1 PT=0 + */ + + ssd1289_putreg(lcd, SSD1289_DSPCTRL, + (SSD1289_DSPCTRL_ON | SSD1289_DSPCTRL_DTE | + SSD1289_DSPCTRL_GON | SSD1289_DSPCTRL_VLE(1))); + + /* Frame cycle control. Alternative: SSD1289_FCYCCTRL_DIV8 */ + + ssd1289_putreg(lcd, SSD1289_FCYCCTRL, 0); + + /* Gate scan start position = 0 */ + + ssd1289_putreg(lcd, SSD1289_GSTART, 0); + + /* Clear vertical scrolling */ + + ssd1289_putreg(lcd, SSD1289_VSCROLL1, 0); + ssd1289_putreg(lcd, SSD1289_VSCROLL2, 0); + + /* Setup window 1 (0-319) */ + + ssd1289_putreg(lcd, SSD1289_W1START, 0); + ssd1289_putreg(lcd, SSD1289_W1END, 319); + + /* Disable window 2 (0-0) */ + + ssd1289_putreg(lcd, SSD1289_W2START, 0); + ssd1289_putreg(lcd, SSD1289_W2END, 0); + + /* Horizontal start and end (0-239) */ + + ssd1289_putreg(lcd, SSD1289_HADDR, + (0 << SSD1289_HADDR_HSA_SHIFT) | (239 << SSD1289_HADDR_HEA_SHIFT)); + + /* Vertical start and end (0-319) */ + + ssd1289_putreg(lcd, SSD1289_VSTART, 0); + ssd1289_putreg(lcd, SSD1289_VEND, 319); + + /* Gamma controls */ + + ssd1289_putreg(lcd, SSD1289_GAMMA1, 0x0707); + ssd1289_putreg(lcd, SSD1289_GAMMA2, 0x0204); /* Alternative: 0x0704 */ + ssd1289_putreg(lcd, SSD1289_GAMMA3, 0x0204); + ssd1289_putreg(lcd, SSD1289_GAMMA4, 0x0502); + ssd1289_putreg(lcd, SSD1289_GAMMA5, 0x0507); + ssd1289_putreg(lcd, SSD1289_GAMMA6, 0x0204); + ssd1289_putreg(lcd, SSD1289_GAMMA7, 0x0204); + ssd1289_putreg(lcd, SSD1289_GAMMA8, 0x0502); + ssd1289_putreg(lcd, SSD1289_GAMMA9, 0x0302); + ssd1289_putreg(lcd, SSD1289_GAMMA10, 0x0302); /* Alternative: 0x1f00 */ + + /* Clear write mask */ + + ssd1289_putreg(lcd, SSD1289_WRMASK1, 0); + ssd1289_putreg(lcd, SSD1289_WRMASK2, 0); + + /* Set frame frequency = 65Hz (This should not be necessary since this + * is the default POR value) + */ + + ssd1289_putreg(lcd, SSD1289_FFREQ, SSD1289_FFREQ_OSC_FF65); + + /* Set the cursor at the home position and set the index register to + * the gram data register (I can't imagine these are necessary). + */ + + ssd1289_setcursor(lcd, 0, 0); + ssd1289_gramselect(lcd); + + /* One driver has a 50 msec delay here */ + /* up_mdelay(50); */ + + return OK; + } +#ifndef CONFIG_LCD_NOGETRUN + else + { + lcddbg("Unsupported LCD type\n"); + return -ENODEV; + } +#endif + + /* De-select the LCD */ + + lcd->deselect(lcd); +} + + /************************************************************************************* + * Public Functions + **************************************************************************************/ + +/************************************************************************************** + * Name: ssd1289_lcdinitialize + * + * Description: + * Initialize the LCD video hardware. The initial state of the LCD is fully + * initialized, display memory cleared, and the LCD ready to use, but with the power + * setting at 0 (full off). + * + **************************************************************************************/ + +FAR struct lcd_dev_s *ssd1289_lcdinitialize(FAR struct ssd1289_lcd_s *lcd) +{ + int ret; + + lcdvdbg("Initializing\n"); + + /* If we ccould support multiple SSD1289 devices, this is where we would allocate + * a new driver data structure... but we can't. Why not? Because of a bad should + * the form of the getrun() and putrun methods. + */ + + FAR struct ssd1289_dev_s *priv = &g_lcddev; + + /* Initialize the driver data structure */ + + priv->dev.getvideoinfo = ssd1289_getvideoinfo; + priv->dev.getplaneinfo = ssd1289_getplaneinfo; + priv->dev.getpower = ssd1289_getpower; + priv->dev.setpower = ssd1289_setpower; + priv->dev.getcontrast = ssd1289_getcontrast; + priv->dev.setcontrast = ssd1289_setcontrast; + priv->lcd = lcd; + + /* Configure and enable LCD */ + + ret = ssd1289_hwinitialize(priv); + if (ret == OK) + { + /* Clear the display (setting it to the color 0=black) */ + + ssd1289_clear(&priv->dev, 0); + + /* Turn the display off */ + + ssd1289_poweroff(lcd); + return &g_lcddev.dev; + } + + return NULL; +} + +/************************************************************************************** + * Name: ssd1289_clear + * + * Description: + * This is a non-standard LCD interface just for the stm3240g-EVAL board. Because + * of the various rotations, clearing the display in the normal way by writing a + * sequences of runs that covers the entire display can be very slow. Here the + * display is cleared by simply setting all GRAM memory to the specified color. + * + **************************************************************************************/ + +void ssd1289_clear(FAR struct lcd_dev_s *dev, uint16_t color) +{ + FAR struct ssd1289_dev_s *priv = (FAR struct ssd1289_dev_s *)dev; + FAR struct ssd1289_lcd_s *lcd = priv->lcd; + uint32_t i; + + /* Select the LCD and home the cursor position */ + + lcd->select(lcd); + ssd1289_setcursor(lcd, 0, 0); + + /* Prepare to write GRAM data */ + + ssd1289_gramselect(lcd); + + /* Copy color into all of GRAM. Orientation does not matter in this case. */ + + for (i = 0; i < SSD1289_XRES * SSD1289_YRES; i++) + { + ssd1289_gramwrite(lcd, color); + } + + /* De-select the LCD */ + + lcd->deselect(lcd); +} + +#endif /* CONFIG_LCD_SSD1289 */ |