diff options
Diffstat (limited to 'src/modules/px4iofirmware')
-rw-r--r-- | src/modules/px4iofirmware/controls.c | 18 | ||||
-rw-r--r-- | src/modules/px4iofirmware/protocol.h | 1 | ||||
-rw-r--r-- | src/modules/px4iofirmware/px4io.c | 63 | ||||
-rw-r--r-- | src/modules/px4iofirmware/px4io.h | 2 | ||||
-rw-r--r-- | src/modules/px4iofirmware/registers.c | 3 |
5 files changed, 83 insertions, 4 deletions
diff --git a/src/modules/px4iofirmware/controls.c b/src/modules/px4iofirmware/controls.c index ad60ee03e..58c9429b6 100644 --- a/src/modules/px4iofirmware/controls.c +++ b/src/modules/px4iofirmware/controls.c @@ -41,6 +41,7 @@ #include <stdbool.h> #include <drivers/drv_hrt.h> +#include <drivers/drv_rc_input.h> #include <systemlib/perf_counter.h> #include <systemlib/ppm_decode.h> #include <rc/st24.h> @@ -70,7 +71,6 @@ bool dsm_port_input(uint16_t *rssi, bool *dsm_updated, bool *st24_updated) uint8_t *bytes; *dsm_updated = dsm_input(r_raw_rc_values, &temp_count, &n_bytes, &bytes); if (*dsm_updated) { - r_raw_rc_flags |= PX4IO_P_STATUS_FLAGS_RC_DSM; r_raw_rc_count = temp_count & 0x7fff; if (temp_count & 0x8000) r_raw_rc_flags |= PX4IO_P_RAW_RC_FLAGS_RC_DSM11; @@ -91,6 +91,7 @@ bool dsm_port_input(uint16_t *rssi, bool *dsm_updated, bool *st24_updated) for (unsigned i = 0; i < n_bytes; i++) { /* set updated flag if one complete packet was parsed */ + st24_rssi = RC_INPUT_RSSI_MAX; *st24_updated |= (OK == st24_decode(bytes[i], &st24_rssi, &rx_count, &st24_channel_count, r_raw_rc_values, PX4IO_RC_INPUT_CHANNELS)); } @@ -170,6 +171,12 @@ controls_tick() { perf_begin(c_gather_dsm); bool dsm_updated, st24_updated; (void)dsm_port_input(&rssi, &dsm_updated, &st24_updated); + if (dsm_updated) { + r_status_flags |= PX4IO_P_STATUS_FLAGS_RC_DSM; + } + if (st24_updated) { + r_status_flags |= PX4IO_P_STATUS_FLAGS_RC_ST24; + } perf_end(c_gather_dsm); perf_begin(c_gather_sbus); @@ -417,6 +424,15 @@ controls_tick() { if ((r_status_flags & PX4IO_P_STATUS_FLAGS_RC_OK) && (REG_TO_SIGNED(rc_value_override) < RC_CHANNEL_LOW_THRESH)) override = true; + /* + if the FMU is dead then enable override if we have a + mixer and OVERRIDE_IMMEDIATE is set + */ + if (!(r_status_flags & PX4IO_P_STATUS_FLAGS_FMU_OK) && + (r_setup_arming & PX4IO_P_SETUP_ARMING_OVERRIDE_IMMEDIATE) && + (r_status_flags & PX4IO_P_STATUS_FLAGS_MIXER_OK)) + override = true; + if (override) { r_status_flags |= PX4IO_P_STATUS_FLAGS_OVERRIDE; diff --git a/src/modules/px4iofirmware/protocol.h b/src/modules/px4iofirmware/protocol.h index 9b2e047cb..c7e9ae3eb 100644 --- a/src/modules/px4iofirmware/protocol.h +++ b/src/modules/px4iofirmware/protocol.h @@ -183,6 +183,7 @@ #define PX4IO_P_SETUP_ARMING_LOCKDOWN (1 << 7) /* If set, the system operates normally, but won't actuate any servos */ #define PX4IO_P_SETUP_ARMING_FORCE_FAILSAFE (1 << 8) /* If set, the system will always output the failsafe values */ #define PX4IO_P_SETUP_ARMING_TERMINATION_FAILSAFE (1 << 9) /* If set, the system will never return from a failsafe, but remain in failsafe once triggered. */ +#define PX4IO_P_SETUP_ARMING_OVERRIDE_IMMEDIATE (1 << 10) /* If set then on FMU failure override is immediate. Othewise it waits for the mode switch to go past the override thrshold */ #define PX4IO_P_SETUP_PWM_RATES 2 /* bitmask, 0 = low rate, 1 = high rate */ #define PX4IO_P_SETUP_PWM_DEFAULTRATE 3 /* 'low' PWM frame output rate in Hz */ diff --git a/src/modules/px4iofirmware/px4io.c b/src/modules/px4iofirmware/px4io.c index 1e5c4ef80..c31342262 100644 --- a/src/modules/px4iofirmware/px4io.c +++ b/src/modules/px4iofirmware/px4io.c @@ -85,6 +85,9 @@ static volatile uint8_t msg_next_out, msg_next_in; #define NUM_MSG 2 static char msg[NUM_MSG][40]; +static void heartbeat_blink(void); +static void ring_blink(void); + /* * add a debug message to be printed on the console */ @@ -124,8 +127,64 @@ heartbeat_blink(void) { static bool heartbeat = false; LED_BLUE(heartbeat = !heartbeat); +} + +static void +ring_blink(void) +{ #ifdef GPIO_LED4 - LED_RING(heartbeat); + + if (/* IO armed */ (r_status_flags & PX4IO_P_STATUS_FLAGS_SAFETY_OFF) + /* and FMU is armed */ && (r_setup_arming & PX4IO_P_SETUP_ARMING_FMU_ARMED)) { + LED_RING(1); + return; + } + + // XXX this led code does have + // intentionally a few magic numbers. + const unsigned max_brightness = 118; + + static unsigned counter = 0; + static unsigned brightness = max_brightness; + static unsigned brightness_counter = 0; + static unsigned on_counter = 0; + + if (brightness_counter < max_brightness) { + + bool on = ((on_counter * 100) / brightness_counter+1) <= ((brightness * 100) / max_brightness+1); + + // XXX once led is PWM driven, + // remove the ! in the line below + // to return to the proper breathe + // animation / pattern (currently inverted) + LED_RING(!on); + brightness_counter++; + + if (on) { + on_counter++; + } + + } else { + + if (counter >= 62) { + counter = 0; + } + + int n; + + if (counter < 32) { + n = counter; + + } else { + n = 62 - counter; + } + + brightness = (n * n) / 8; + brightness_counter = 0; + on_counter = 0; + counter++; + } + #endif } @@ -300,6 +359,8 @@ user_start(int argc, char *argv[]) heartbeat_blink(); } + ring_blink(); + check_reboot(); /* check for debug activity (default: none) */ diff --git a/src/modules/px4iofirmware/px4io.h b/src/modules/px4iofirmware/px4io.h index 8186e4c78..93a33490f 100644 --- a/src/modules/px4iofirmware/px4io.h +++ b/src/modules/px4iofirmware/px4io.h @@ -140,7 +140,7 @@ extern pwm_limit_t pwm_limit; #define LED_BLUE(_s) stm32_gpiowrite(GPIO_LED1, !(_s)) #define LED_AMBER(_s) stm32_gpiowrite(GPIO_LED2, !(_s)) #define LED_SAFETY(_s) stm32_gpiowrite(GPIO_LED3, !(_s)) -#define LED_RING(_s) stm32_gpiowrite(GPIO_LED4, !(_s)) +#define LED_RING(_s) stm32_gpiowrite(GPIO_LED4, (_s)) #ifdef CONFIG_ARCH_BOARD_PX4IO_V1 diff --git a/src/modules/px4iofirmware/registers.c b/src/modules/px4iofirmware/registers.c index 49c2a9f56..fbfdd35db 100644 --- a/src/modules/px4iofirmware/registers.c +++ b/src/modules/px4iofirmware/registers.c @@ -191,7 +191,8 @@ volatile uint16_t r_page_setup[] = PX4IO_P_SETUP_ARMING_RC_HANDLING_DISABLED | \ PX4IO_P_SETUP_ARMING_LOCKDOWN | \ PX4IO_P_SETUP_ARMING_FORCE_FAILSAFE | \ - PX4IO_P_SETUP_ARMING_TERMINATION_FAILSAFE) + PX4IO_P_SETUP_ARMING_TERMINATION_FAILSAFE | \ + PX4IO_P_SETUP_ARMING_OVERRIDE_IMMEDIATE) #define PX4IO_P_SETUP_RATES_VALID ((1 << PX4IO_SERVO_COUNT) - 1) #define PX4IO_P_SETUP_RELAYS_VALID ((1 << PX4IO_RELAY_CHANNELS) - 1) |