From db044b64cddea9510dd5b43be304ef723acda636 Mon Sep 17 00:00:00 2001 From: px4dev Date: Tue, 23 Oct 2012 22:31:36 -0700 Subject: Hoist the oard-specific USB pieces. --- apps/drivers/boards/px4fmu/px4fmu_usb.c | 108 ++++++++++++++++++++++++++++++++ nuttx/configs/px4fmu/src/Makefile | 3 +- nuttx/configs/px4fmu/src/up_usbdev.c | 105 ------------------------------- 3 files changed, 109 insertions(+), 107 deletions(-) create mode 100644 apps/drivers/boards/px4fmu/px4fmu_usb.c delete mode 100644 nuttx/configs/px4fmu/src/up_usbdev.c diff --git a/apps/drivers/boards/px4fmu/px4fmu_usb.c b/apps/drivers/boards/px4fmu/px4fmu_usb.c new file mode 100644 index 000000000..d635e719b --- /dev/null +++ b/apps/drivers/boards/px4fmu/px4fmu_usb.c @@ -0,0 +1,108 @@ +/**************************************************************************** + * + * Copyright (C) 2012 PX4 Development Team. All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * 3. Neither the name PX4 nor the names of its contributors may be + * used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS + * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE + * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, + * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS + * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED + * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN + * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************/ + +/** + * @file px4fmu_usb.c + * + * Board-specific USB functions. + */ + +/************************************************************************************ + * Included Files + ************************************************************************************/ + +#include + +#include +#include +#include +#include + +#include +#include + +#include "up_arch.h" +#include "stm32_internal.h" +#include "px4fmu_internal.h" + +/************************************************************************************ + * Definitions + ************************************************************************************/ + +/************************************************************************************ + * Private Functions + ************************************************************************************/ + +/************************************************************************************ + * Public Functions + ************************************************************************************/ + +/************************************************************************************ + * Name: stm32_usbinitialize + * + * Description: + * Called to setup USB-related GPIO pins for the PX4FMU board. + * + ************************************************************************************/ + +__EXPORT void stm32_usbinitialize(void) +{ + /* The OTG FS has an internal soft pull-up */ + + /* Configure the OTG FS VBUS sensing GPIO, Power On, and Overcurrent GPIOs */ + +#ifdef CONFIG_STM32_OTGFS + stm32_configgpio(GPIO_OTGFS_VBUS); + /* XXX We only support device mode + stm32_configgpio(GPIO_OTGFS_PWRON); + stm32_configgpio(GPIO_OTGFS_OVER); + */ +#endif +} + +/************************************************************************************ + * Name: stm32_usbsuspend + * + * Description: + * Board logic must provide the stm32_usbsuspend logic if the USBDEV driver is + * used. This function is called whenever the USB enters or leaves suspend mode. + * This is an opportunity for the board logic to shutdown clocks, power, etc. + * while the USB is suspended. + * + ************************************************************************************/ + +__EXPORT void stm32_usbsuspend(FAR struct usbdev_s *dev, bool resume) +{ + ulldbg("resume: %d\n", resume); +} + diff --git a/nuttx/configs/px4fmu/src/Makefile b/nuttx/configs/px4fmu/src/Makefile index e64d076bd..281d9c247 100644 --- a/nuttx/configs/px4fmu/src/Makefile +++ b/nuttx/configs/px4fmu/src/Makefile @@ -42,8 +42,7 @@ AOBJS = $(ASRCS:.S=$(OBJEXT)) CSRCS = up_leds.c \ drv_gpio.c \ - drv_led.c drv_eeprom.c \ - up_usbdev.c + drv_led.c drv_eeprom.c ifeq ($(CONFIG_ADC),y) CSRCS += up_adc.c diff --git a/nuttx/configs/px4fmu/src/up_usbdev.c b/nuttx/configs/px4fmu/src/up_usbdev.c deleted file mode 100644 index 4ef105e91..000000000 --- a/nuttx/configs/px4fmu/src/up_usbdev.c +++ /dev/null @@ -1,105 +0,0 @@ -/************************************************************************************ - * configs/stm32f4discovery/src/up_usbdev.c - * arch/arm/src/board/up_boot.c - * - * Copyright (C) 2012 Gregory Nutt. All rights reserved. - * Author: Gregory Nutt - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * 3. Neither the name NuttX nor the names of its contributors may be - * used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS - * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE - * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, - * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS - * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED - * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN - * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE - * POSSIBILITY OF SUCH DAMAGE. - * - ************************************************************************************/ - -/************************************************************************************ - * Included Files - ************************************************************************************/ - -#include - -#include -#include -#include -#include - -#include -#include - -#include "up_arch.h" -#include "stm32_internal.h" -#include "px4fmu-internal.h" - -/************************************************************************************ - * Definitions - ************************************************************************************/ - -/************************************************************************************ - * Private Functions - ************************************************************************************/ - -/************************************************************************************ - * Public Functions - ************************************************************************************/ - -/************************************************************************************ - * Name: stm32_usbinitialize - * - * Description: - * Called to setup USB-related GPIO pins for the STM3210E-EVAL board. - * - ************************************************************************************/ - -void stm32_usbinitialize(void) -{ - /* The OTG FS has an internal soft pull-up */ - - /* Configure the OTG FS VBUS sensing GPIO, Power On, and Overcurrent GPIOs */ - -#ifdef CONFIG_STM32_OTGFS - stm32_configgpio(GPIO_OTGFS_VBUS); - /* XXX We only support device mode - stm32_configgpio(GPIO_OTGFS_PWRON); - stm32_configgpio(GPIO_OTGFS_OVER); - */ -#endif -} - -/************************************************************************************ - * Name: stm32_usbsuspend - * - * Description: - * Board logic must provide the stm32_usbsuspend logic if the USBDEV driver is - * used. This function is called whenever the USB enters or leaves suspend mode. - * This is an opportunity for the board logic to shutdown clocks, power, etc. - * while the USB is suspended. - * - ************************************************************************************/ - -void stm32_usbsuspend(FAR struct usbdev_s *dev, bool resume) -{ - ulldbg("resume: %d\n", resume); -} - -- cgit v1.2.3