From 28845c4846e4f225e686f6643b5d2e0851392b2b Mon Sep 17 00:00:00 2001 From: Thomas Gubler Date: Sat, 19 Oct 2013 09:45:34 +0200 Subject: Rascal (AERT) hil startup script --- ROMFS/px4fmu_common/init.d/1000_rc_fw_easystar.hil | 92 ++++++++++++++++++++++ 1 file changed, 92 insertions(+) create mode 100644 ROMFS/px4fmu_common/init.d/1000_rc_fw_easystar.hil (limited to 'ROMFS/px4fmu_common/init.d/1000_rc_fw_easystar.hil') diff --git a/ROMFS/px4fmu_common/init.d/1000_rc_fw_easystar.hil b/ROMFS/px4fmu_common/init.d/1000_rc_fw_easystar.hil new file mode 100644 index 000000000..5e4028bbb --- /dev/null +++ b/ROMFS/px4fmu_common/init.d/1000_rc_fw_easystar.hil @@ -0,0 +1,92 @@ +#!nsh +# +# USB HIL start +# + +echo "[HIL] HILStar starting.." + +# +# Load default params for this platform +# +if param compare SYS_AUTOCONFIG 1 +then + # Set all params here, then disable autoconfig + + param set FW_P_D 0 + param set FW_P_I 0 + param set FW_P_IMAX 15 + param set FW_P_LIM_MAX 50 + param set FW_P_LIM_MIN -50 + param set FW_P_P 60 + param set FW_P_RMAX_NEG 0 + param set FW_P_RMAX_POS 0 + param set FW_P_ROLLFF 1.1 + param set FW_R_D 0 + param set FW_R_I 5 + param set FW_R_IMAX 20 + param set FW_R_P 100 + param set FW_R_RMAX 100 + param set FW_THR_CRUISE 0.65 + param set FW_THR_MAX 1 + param set FW_THR_MIN 0 + param set FW_T_SINK_MAX 5.0 + param set FW_T_SINK_MIN 4.0 + param set FW_Y_ROLLFF 1.1 + param set FW_L1_PERIOD 16 + param set RC_SCALE_ROLL 1.0 + param set RC_SCALE_PITCH 1.0 + + param set SYS_AUTOCONFIG 0 + param save +fi + +# Allow USB some time to come up +sleep 1 +# Tell MAVLink that this link is "fast" +mavlink start -b 230400 -d /dev/ttyACM0 + +# Create a fake HIL /dev/pwm_output interface +hil mode_pwm + +# +# Force some key parameters to sane values +# MAV_TYPE 1 = fixed wing, 2 = quadrotor, 13 = hexarotor +# see https://pixhawk.ethz.ch/mavlink/ +# +param set MAV_TYPE 1 + +# +# Start the commander (depends on orb, mavlink) +# +commander start + +# +# Check if we got an IO +# +if px4io start +then + echo "IO started" +else + fmu mode_serial + echo "FMU started" +fi + +# +# Start the sensors (depends on orb, px4io) +# +sh /etc/init.d/rc.sensors + +# +# Start the attitude estimator (depends on orb) +# +att_pos_estimator_ekf start + +# +# Load mixer and start controllers (depends on px4io) +# +mixer load /dev/pwm_output /etc/mixers/FMU_AET.mix +fw_pos_control_l1 start +fw_att_control start + +echo "[HIL] setup done, running" + -- cgit v1.2.3