From 318abfabcb1e0d8d23df3df8015d4c7bdc011b2a Mon Sep 17 00:00:00 2001 From: marco Date: Fri, 13 Sep 2013 21:05:41 +0200 Subject: mkblctrl fix and qgroundcontrol2 startup script for different frametypes --- .../init.d/rc.custom_dji_f330_mkblctrl | 122 +++++++++++++++++++++ 1 file changed, 122 insertions(+) create mode 100644 ROMFS/px4fmu_common/init.d/rc.custom_dji_f330_mkblctrl (limited to 'ROMFS/px4fmu_common/init.d/rc.custom_dji_f330_mkblctrl') diff --git a/ROMFS/px4fmu_common/init.d/rc.custom_dji_f330_mkblctrl b/ROMFS/px4fmu_common/init.d/rc.custom_dji_f330_mkblctrl new file mode 100644 index 000000000..51bc61c9e --- /dev/null +++ b/ROMFS/px4fmu_common/init.d/rc.custom_dji_f330_mkblctrl @@ -0,0 +1,122 @@ +#!nsh + +# +# Load default params for this platform +# +if param compare SYS_AUTOCONFIG 1 +then + # Set all params here, then disable autoconfig + param set SYS_AUTOCONFIG 0 + + param set MC_ATTRATE_D 0.002 + param set MC_ATTRATE_I 0.0 + param set MC_ATTRATE_P 0.09 + param set MC_ATT_D 0.0 + param set MC_ATT_I 0.0 + param set MC_ATT_P 6.8 + param set MC_YAWPOS_D 0.0 + param set MC_YAWPOS_I 0.0 + param set MC_YAWPOS_P 2.0 + param set MC_YAWRATE_D 0.005 + param set MC_YAWRATE_I 0.2 + param set MC_YAWRATE_P 0.3 + param set NAV_TAKEOFF_ALT 3.0 + param set MPC_TILT_MAX 0.5 + param set MPC_THR_MAX 0.7 + param set MPC_THR_MIN 0.3 + param set MPC_XY_D 0 + param set MPC_XY_P 0.5 + param set MPC_XY_VEL_D 0 + param set MPC_XY_VEL_I 0 + param set MPC_XY_VEL_MAX 3 + param set MPC_XY_VEL_P 0.2 + param set MPC_Z_D 0 + param set MPC_Z_P 1 + param set MPC_Z_VEL_D 0 + param set MPC_Z_VEL_I 0.1 + param set MPC_Z_VEL_MAX 2 + param set MPC_Z_VEL_P 0.20 + + param save +fi + +# +# Force some key parameters to sane values +# MAV_TYPE 2 = quadrotor +# +param set MAV_TYPE 2 + +set EXIT_ON_END no + +# +# Start the Mikrokopter ESC driver +# +if [ $MKBLCTRL_MODE == yes ] +then + if [ $MKBLCTRL_FRAME == x ] + then + echo "[init] PX4FMU v1, v2 with or without IO and Mikrokopter I2C ESCs on DJI F330 X Frame Mikrokopter-Addressing" + mkblctrl -mkmode x + else + echo "[init] PX4FMU v1, v2 with or without IO and Mikrokopter I2C ESCs on DJI F330 + Frame Mikrokopter-Addressing" + mkblctrl -mkmode + + fi +else + if [ $MKBLCTRL_FRAME == x ] + then + echo "[init] PX4FMU v1, v2 with or without IO and Mikrokopter I2C ESCs on DJI F330 X Frame" + else + echo "[init] PX4FMU v1, v2 with or without IO and Mikrokopter I2C ESCs on DJI F330 + Frame" + fi + mkblctrl +fi + +usleep 10000 + +# +# Start and configure PX4IO or FMU interface +# +if px4io detect +then + # Start MAVLink (depends on orb) + mavlink start + usleep 5000 + + sh /etc/init.d/rc.io + # Set PWM values for DJI ESCs + px4io idle 900 900 900 900 + px4io min 1200 1200 1200 1200 + px4io max 1800 1800 1800 1800 +else + fmu mode_pwm + # Start MAVLink (on UART1 / ttyS0) + mavlink start -d /dev/ttyS0 + usleep 5000 + param set BAT_V_SCALING 0.004593 + set EXIT_ON_END yes +fi + +# +# Load mixer +# +if [ $MKBLCTRL_FRAME == x ] +then + mixer load /dev/pwm_output /etc/mixers/FMU_quad_x.mix +else + mixer load /dev/pwm_output /etc/mixers/FMU_quad_+.mix +fi + +# +# Set PWM output frequency +# +#pwm -u 400 -m 0xff + +# +# Start common for all multirotors apps +# +sh /etc/init.d/rc.multirotor + +if [ $EXIT_ON_END == yes ] +then + exit +fi -- cgit v1.2.3