From 00961b55928a949a2dd3b7022fe2cbb4df06ec22 Mon Sep 17 00:00:00 2001 From: Lorenz Meier Date: Sat, 22 Nov 2014 15:43:21 +0100 Subject: ROMFS: Do only output necessary information on boot --- ROMFS/px4fmu_common/init.d/rc.interface | 6 +----- ROMFS/px4fmu_common/init.d/rcS | 1 - 2 files changed, 1 insertion(+), 6 deletions(-) (limited to 'ROMFS/px4fmu_common/init.d') diff --git a/ROMFS/px4fmu_common/init.d/rc.interface b/ROMFS/px4fmu_common/init.d/rc.interface index e44cd0953..41e0b149b 100644 --- a/ROMFS/px4fmu_common/init.d/rc.interface +++ b/ROMFS/px4fmu_common/init.d/rc.interface @@ -10,7 +10,7 @@ then # set MIXERSD /fs/microsd/etc/mixers/$MIXER.mix - #Use the mixer file from the SD-card if it exists + # Use the mixer file from the SD-card if it exists if [ -f $MIXERSD ] then set MIXER_FILE $MIXERSD @@ -54,7 +54,6 @@ then # if [ $PWM_RATE != none ] then - echo "[init] Set PWM rate: $PWM_RATE" pwm rate -c $PWM_OUTPUTS -r $PWM_RATE fi @@ -63,17 +62,14 @@ then # if [ $PWM_DISARMED != none ] then - echo "[init] Set PWM disarmed: $PWM_DISARMED" pwm disarmed -c $PWM_OUTPUTS -p $PWM_DISARMED fi if [ $PWM_MIN != none ] then - echo "[init] Set PWM min: $PWM_MIN" pwm min -c $PWM_OUTPUTS -p $PWM_MIN fi if [ $PWM_MAX != none ] then - echo "[init] Set PWM max: $PWM_MAX" pwm max -c $PWM_OUTPUTS -p $PWM_MAX fi fi diff --git a/ROMFS/px4fmu_common/init.d/rcS b/ROMFS/px4fmu_common/init.d/rcS index f9c822635..201b99749 100644 --- a/ROMFS/px4fmu_common/init.d/rcS +++ b/ROMFS/px4fmu_common/init.d/rcS @@ -444,7 +444,6 @@ then if [ $GPS == yes ] then - echo "[init] Start GPS" if [ $GPS_FAKE == yes ] then echo "[init] Faking GPS" -- cgit v1.2.3 From 2a9a649adbf64ba2c8c56d5a934aa8e09838bec6 Mon Sep 17 00:00:00 2001 From: Lorenz Meier Date: Wed, 26 Nov 2014 18:21:54 +0100 Subject: Make boot less verbose to not hide the important status messages --- ROMFS/px4fmu_common/init.d/rcS | 5 ----- 1 file changed, 5 deletions(-) (limited to 'ROMFS/px4fmu_common/init.d') diff --git a/ROMFS/px4fmu_common/init.d/rcS b/ROMFS/px4fmu_common/init.d/rcS index 201b99749..353f44877 100644 --- a/ROMFS/px4fmu_common/init.d/rcS +++ b/ROMFS/px4fmu_common/init.d/rcS @@ -301,7 +301,6 @@ then if [ $OUTPUT_MODE == io -o $OUTPUT_MODE == uavcan_esc ] then - echo "[init] Use PX4IO PWM as primary output" if px4io start then echo "[init] PX4IO started" @@ -314,7 +313,6 @@ then if [ $OUTPUT_MODE == fmu -o $OUTPUT_MODE == ardrone ] then - echo "[init] Use FMU as primary output" if fmu mode_$FMU_MODE then echo "[init] FMU mode_$FMU_MODE started" @@ -338,7 +336,6 @@ then if [ $OUTPUT_MODE == mkblctrl ] then - echo "[init] Use MKBLCTRL as primary output" set MKBLCTRL_ARG "" if [ $MKBLCTRL_MODE == x ] then @@ -361,7 +358,6 @@ then if [ $OUTPUT_MODE == hil ] then - echo "[init] Use HIL as primary output" if hil mode_port2_pwm8 then echo "[init] HIL output started" @@ -380,7 +376,6 @@ then then if px4io start then - echo "[init] PX4IO started" sh /etc/init.d/rc.io else echo "[init] ERROR: PX4IO start failed" -- cgit v1.2.3 From 4bb07514c86d020bc2b16058e75de3074f89aa4b Mon Sep 17 00:00:00 2001 From: Lorenz Meier Date: Fri, 12 Dec 2014 23:22:21 +0100 Subject: Give Skywalker its own mixer --- ROMFS/px4fmu_common/init.d/2102_3dr_skywalker | 2 +- ROMFS/px4fmu_common/mixers/skywalker.mix | 64 +++++++++++++++++++++++++++ 2 files changed, 65 insertions(+), 1 deletion(-) create mode 100644 ROMFS/px4fmu_common/mixers/skywalker.mix (limited to 'ROMFS/px4fmu_common/init.d') diff --git a/ROMFS/px4fmu_common/init.d/2102_3dr_skywalker b/ROMFS/px4fmu_common/init.d/2102_3dr_skywalker index dcc5db824..906f4b1cc 100644 --- a/ROMFS/px4fmu_common/init.d/2102_3dr_skywalker +++ b/ROMFS/px4fmu_common/init.d/2102_3dr_skywalker @@ -2,4 +2,4 @@ sh /etc/init.d/rc.fw_defaults -set MIXER FMU_AERT \ No newline at end of file +set MIXER skywalker \ No newline at end of file diff --git a/ROMFS/px4fmu_common/mixers/skywalker.mix b/ROMFS/px4fmu_common/mixers/skywalker.mix new file mode 100644 index 000000000..04d677e56 --- /dev/null +++ b/ROMFS/px4fmu_common/mixers/skywalker.mix @@ -0,0 +1,64 @@ +Mixer for Skywalker Airframe +================================================== + +This file defines mixers suitable for controlling a fixed wing aircraft with +aileron, rudder, elevator and throttle controls using PX4FMU. The configuration +assumes the aileron servo(s) are connected to PX4FMU servo output 0, the +elevator to output 1, the rudder to output 2 and the throttle to output 3. + +Inputs to the mixer come from channel group 0 (vehicle attitude), channels 0 +(roll), 1 (pitch) and 3 (thrust). + +Aileron mixer +------------- +Two scalers total (output, roll). + +This mixer assumes that the aileron servos are set up correctly mechanically; +depending on the actual configuration it may be necessary to reverse the scaling +factors (to reverse the servo movement) and adjust the offset, scaling and +endpoints to suit. + +As there is only one output, if using two servos adjustments to compensate for +differences between the servos must be made mechanically. To obtain the correct +motion using a Y cable, the servos can be positioned reversed from one another. + +M: 1 +O: 10000 10000 0 -10000 10000 +S: 0 0 -10000 -10000 0 -10000 10000 + +Elevator mixer +------------ +Two scalers total (output, roll). + +This mixer assumes that the elevator servo is set up correctly mechanically; +depending on the actual configuration it may be necessary to reverse the scaling +factors (to reverse the servo movement) and adjust the offset, scaling and +endpoints to suit. + +M: 1 +O: 10000 10000 0 -10000 10000 +S: 0 1 10000 10000 0 -10000 10000 + +Rudder mixer +------------ +Two scalers total (output, yaw). + +This mixer assumes that the rudder servo is set up correctly mechanically; +depending on the actual configuration it may be necessary to reverse the scaling +factors (to reverse the servo movement) and adjust the offset, scaling and +endpoints to suit. + +M: 1 +O: 10000 10000 0 -10000 10000 +S: 0 2 10000 10000 0 -10000 10000 + +Motor speed mixer +----------------- +Two scalers total (output, thrust). + +This mixer generates a full-range output (-1 to 1) from an input in the (0 - 1) +range. Inputs below zero are treated as zero. + +M: 1 +O: 10000 10000 0 -10000 10000 +S: 0 3 0 20000 -10000 -10000 10000 -- cgit v1.2.3