From d96e63960c9f951dac02f122ac1e067f7dd3316f Mon Sep 17 00:00:00 2001
From: Thomas Gubler <thomasgubler@gmail.com>
Date: Sun, 19 Jan 2014 12:42:43 +0100
Subject: enable new autostart scripts for Rascal HIL and X5

---
 .../px4fmu_common/init.d/1004_rc_fw_Rascal110.hil  | 68 +++-------------------
 ROMFS/px4fmu_common/init.d/rc.autostart            |  4 +-
 2 files changed, 10 insertions(+), 62 deletions(-)

(limited to 'ROMFS')

diff --git a/ROMFS/px4fmu_common/init.d/1004_rc_fw_Rascal110.hil b/ROMFS/px4fmu_common/init.d/1004_rc_fw_Rascal110.hil
index 344d78422..75a00a675 100644
--- a/ROMFS/px4fmu_common/init.d/1004_rc_fw_Rascal110.hil
+++ b/ROMFS/px4fmu_common/init.d/1004_rc_fw_Rascal110.hil
@@ -1,14 +1,13 @@
 #!nsh
 #
-# USB HIL start
+# HIL Rascal 110 (Flightgear)
+#
+# Maintainers: Thomas Gubler <thomasgubler@gmail.com>
 #
 
-echo "[HIL] HILStar starting.."
+echo "HIL Rascal 110 starting.."
 
-#
-# Load default params for this platform
-#
-if param compare SYS_AUTOCONFIG 1
+if [ $DO_AUTOCONFIG == yes ]
 then
 	# Set all params here, then disable autoconfig
 	
@@ -40,59 +39,8 @@ then
 	param save
 fi
 
-# Allow USB some time to come up
-sleep 1
-# Tell MAVLink that this link is "fast"
-mavlink start -b 230400 -d /dev/ttyACM0
-
-# Create a fake HIL /dev/pwm_output interface
-hil mode_pwm
-
-#
-# Force some key parameters to sane values
-# MAV_TYPE     1 = fixed wing, 2 = quadrotor, 13 = hexarotor
-#              see https://pixhawk.ethz.ch/mavlink/
-#
-param set MAV_TYPE 1
-
-#
-# Check if we got an IO
-#
-if px4io start
-then
-	echo "IO started"
-else
-	fmu mode_serial
-	echo "FMU started"
-fi
-
-#
-# Start the sensors (depends on orb, px4io)
-#
-sh /etc/init.d/rc.sensors
-
-#
-# Start the attitude estimator (depends on orb)
-#
-att_pos_estimator_ekf start
- 
-#
-# Load mixer and start controllers (depends on px4io)
-#
-set MODE autostart
-mixer load /dev/pwm_output /etc/mixers/FMU_AERT.mix
-if [ -f /fs/microsd/etc/mixers/FMU_AERT.mix ]
-then
-	echo "Using /fs/microsd/etc/mixers/FMU_AERT.mix"
-	mixer load /dev/pwm_output /fs/microsd/etc/mixers/FMU_AERT.mix
-else
-	echo "Using /etc/mixers/FMU_AERT.mix"
-	mixer load /dev/pwm_output /etc/mixers/FMU_AERT.mix
-fi
-
-
-fw_pos_control_l1 start
-fw_att_control start
+set HIL yes
 
-echo "[HIL] setup done, running"
+set VEHICLE_TYPE fw
+set MIXER FMU_AERT
 
diff --git a/ROMFS/px4fmu_common/init.d/rc.autostart b/ROMFS/px4fmu_common/init.d/rc.autostart
index 69e88fcd0..325520dd0 100644
--- a/ROMFS/px4fmu_common/init.d/rc.autostart
+++ b/ROMFS/px4fmu_common/init.d/rc.autostart
@@ -43,7 +43,7 @@ fi
 
 if param compare SYS_AUTOSTART 1004
 then
-	#sh /etc/init.d/1004_rc_fw_Rascal110.hil
+	sh /etc/init.d/1004_rc_fw_Rascal110.hil
 fi
 
 #
@@ -84,7 +84,7 @@ fi
 
 if param compare SYS_AUTOSTART 3032
 then
-	#sh /etc/init.d/3032_skywalker_x5
+	sh /etc/init.d/3032_skywalker_x5
 fi
 
 if param compare SYS_AUTOSTART 3033
-- 
cgit v1.2.3