From 97fdc69473179d9bd4f92f7fdef768d830fabe3d Mon Sep 17 00:00:00 2001 From: James Goppert Date: Thu, 18 Dec 2014 15:18:33 -0500 Subject: Added aerocore upload target. --- makefiles/gumstix-aerocore.cfg | 10 ++++++++++ makefiles/upload.mk | 5 +++++ 2 files changed, 15 insertions(+) create mode 100644 makefiles/gumstix-aerocore.cfg (limited to 'makefiles') diff --git a/makefiles/gumstix-aerocore.cfg b/makefiles/gumstix-aerocore.cfg new file mode 100644 index 000000000..ba217c043 --- /dev/null +++ b/makefiles/gumstix-aerocore.cfg @@ -0,0 +1,10 @@ +# JTAG for the STM32F4x chip used on the Gumstix AeroCore is available on +# the first interface of a Quad FTDI chip. nTRST is bit 4. +interface ftdi +ftdi_vid_pid 0x0403 0x6011 + +ftdi_layout_init 0x0000 0x001b +ftdi_layout_signal nTRST -data 0x0010 + +source [find target/stm32f4x.cfg] +reset_config trst_only diff --git a/makefiles/upload.mk b/makefiles/upload.mk index bc26d743d..29b415688 100644 --- a/makefiles/upload.mk +++ b/makefiles/upload.mk @@ -30,6 +30,11 @@ upload-serial-px4fmu-v1: $(BUNDLE) $(UPLOADER) upload-serial-px4fmu-v2: $(BUNDLE) $(UPLOADER) $(Q) $(PYTHON) -u $(UPLOADER) --port $(SERIAL_PORTS) $(BUNDLE) +upload-serial-aerocore: + openocd -f $(PX4_BASE)/makefiles/gumstix-aerocore.cfg -c 'init; reset halt; flash write_image erase $(PX4_BASE)/../Bootloader/px4aerocore_bl.bin 0x08000000; flash write_image erase $(PX4_BASE)/Build/aerocore_default.build/firmware.bin 0x08004000; reset run; exit' + + + # # JTAG firmware uploading with OpenOCD # -- cgit v1.2.3