From 8a365179eafdf3aea98e60ab9f5882b200d4c759 Mon Sep 17 00:00:00 2001 From: px4dev Date: Sat, 4 Aug 2012 15:12:36 -0700 Subject: Fresh import of the PX4 firmware sources. --- mavlink/share/pyshared/pymavlink/mavlink.py | 4930 +++++++++++++++++++++++++++ 1 file changed, 4930 insertions(+) create mode 100644 mavlink/share/pyshared/pymavlink/mavlink.py (limited to 'mavlink/share/pyshared/pymavlink/mavlink.py') diff --git a/mavlink/share/pyshared/pymavlink/mavlink.py b/mavlink/share/pyshared/pymavlink/mavlink.py new file mode 100644 index 000000000..3287a921d --- /dev/null +++ b/mavlink/share/pyshared/pymavlink/mavlink.py @@ -0,0 +1,4930 @@ +''' +MAVLink protocol implementation (auto-generated by mavgen.py) + +Generated from: ardupilotmega.xml,common.xml + +Note: this file has been auto-generated. DO NOT EDIT +''' + +import struct, array, mavutil, time + +WIRE_PROTOCOL_VERSION = "0.9" + +class MAVLink_header(object): + '''MAVLink message header''' + def __init__(self, msgId, mlen=0, seq=0, srcSystem=0, srcComponent=0): + self.mlen = mlen + self.seq = seq + self.srcSystem = srcSystem + self.srcComponent = srcComponent + self.msgId = msgId + + def pack(self): + return struct.pack('BBBBBB', 85, self.mlen, self.seq, + self.srcSystem, self.srcComponent, self.msgId) + +class MAVLink_message(object): + '''base MAVLink message class''' + def __init__(self, msgId, name): + self._header = MAVLink_header(msgId) + self._payload = None + self._msgbuf = None + self._crc = None + self._fieldnames = [] + self._type = name + + def get_msgbuf(self): + return self._msgbuf + + def get_header(self): + return self._header + + def get_payload(self): + return self._payload + + def get_crc(self): + return self._crc + + def get_fieldnames(self): + return self._fieldnames + + def get_type(self): + return self._type + + def get_msgId(self): + return self._header.msgId + + def get_srcSystem(self): + return self._header.srcSystem + + def get_srcComponent(self): + return self._header.srcComponent + + def get_seq(self): + return self._header.seq + + def __str__(self): + ret = '%s {' % self._type + for a in self._fieldnames: + v = getattr(self, a) + ret += '%s : %s, ' % (a, v) + ret = ret[0:-2] + '}' + return ret + + def pack(self, mav, crc_extra, payload): + self._payload = payload + self._header = MAVLink_header(self._header.msgId, len(payload), mav.seq, + mav.srcSystem, mav.srcComponent) + self._msgbuf = self._header.pack() + payload + crc = mavutil.x25crc(self._msgbuf[1:]) + if False: # using CRC extra + crc.accumulate(chr(crc_extra)) + self._crc = crc.crc + self._msgbuf += struct.pack('hhhfiiffffff', self.mag_ofs_x, self.mag_ofs_y, self.mag_ofs_z, self.mag_declination, self.raw_press, self.raw_temp, self.gyro_cal_x, self.gyro_cal_y, self.gyro_cal_z, self.accel_cal_x, self.accel_cal_y, self.accel_cal_z)) + +class MAVLink_set_mag_offsets_message(MAVLink_message): + ''' + set the magnetometer offsets + ''' + def __init__(self, target_system, target_component, mag_ofs_x, mag_ofs_y, mag_ofs_z): + MAVLink_message.__init__(self, MAVLINK_MSG_ID_SET_MAG_OFFSETS, 'SET_MAG_OFFSETS') + self._fieldnames = ['target_system', 'target_component', 'mag_ofs_x', 'mag_ofs_y', 'mag_ofs_z'] + self.target_system = target_system + self.target_component = target_component + self.mag_ofs_x = mag_ofs_x + self.mag_ofs_y = mag_ofs_y + self.mag_ofs_z = mag_ofs_z + + def pack(self, mav): + return MAVLink_message.pack(self, mav, 29, struct.pack('>BBhhh', self.target_system, self.target_component, self.mag_ofs_x, self.mag_ofs_y, self.mag_ofs_z)) + +class MAVLink_meminfo_message(MAVLink_message): + ''' + state of APM memory + ''' + def __init__(self, brkval, freemem): + MAVLink_message.__init__(self, MAVLINK_MSG_ID_MEMINFO, 'MEMINFO') + self._fieldnames = ['brkval', 'freemem'] + self.brkval = brkval + self.freemem = freemem + + def pack(self, mav): + return MAVLink_message.pack(self, mav, 208, struct.pack('>HH', self.brkval, self.freemem)) + +class MAVLink_ap_adc_message(MAVLink_message): + ''' + raw ADC output + ''' + def __init__(self, adc1, adc2, adc3, adc4, adc5, adc6): + MAVLink_message.__init__(self, MAVLINK_MSG_ID_AP_ADC, 'AP_ADC') + self._fieldnames = ['adc1', 'adc2', 'adc3', 'adc4', 'adc5', 'adc6'] + self.adc1 = adc1 + self.adc2 = adc2 + self.adc3 = adc3 + self.adc4 = adc4 + self.adc5 = adc5 + self.adc6 = adc6 + + def pack(self, mav): + return MAVLink_message.pack(self, mav, 188, struct.pack('>HHHHHH', self.adc1, self.adc2, self.adc3, self.adc4, self.adc5, self.adc6)) + +class MAVLink_digicam_configure_message(MAVLink_message): + ''' + Configure on-board Camera Control System. + ''' + def __init__(self, target_system, target_component, mode, shutter_speed, aperture, iso, exposure_type, command_id, engine_cut_off, extra_param, extra_value): + MAVLink_message.__init__(self, MAVLINK_MSG_ID_DIGICAM_CONFIGURE, 'DIGICAM_CONFIGURE') + self._fieldnames = ['target_system', 'target_component', 'mode', 'shutter_speed', 'aperture', 'iso', 'exposure_type', 'command_id', 'engine_cut_off', 'extra_param', 'extra_value'] + self.target_system = target_system + self.target_component = target_component + self.mode = mode + self.shutter_speed = shutter_speed + self.aperture = aperture + self.iso = iso + self.exposure_type = exposure_type + self.command_id = command_id + self.engine_cut_off = engine_cut_off + self.extra_param = extra_param + self.extra_value = extra_value + + def pack(self, mav): + return MAVLink_message.pack(self, mav, 118, struct.pack('>BBBHBBBBBBf', self.target_system, self.target_component, self.mode, self.shutter_speed, self.aperture, self.iso, self.exposure_type, self.command_id, self.engine_cut_off, self.extra_param, self.extra_value)) + +class MAVLink_digicam_control_message(MAVLink_message): + ''' + Control on-board Camera Control System to take shots. + ''' + def __init__(self, target_system, target_component, session, zoom_pos, zoom_step, focus_lock, shot, command_id, extra_param, extra_value): + MAVLink_message.__init__(self, MAVLINK_MSG_ID_DIGICAM_CONTROL, 'DIGICAM_CONTROL') + self._fieldnames = ['target_system', 'target_component', 'session', 'zoom_pos', 'zoom_step', 'focus_lock', 'shot', 'command_id', 'extra_param', 'extra_value'] + self.target_system = target_system + self.target_component = target_component + self.session = session + self.zoom_pos = zoom_pos + self.zoom_step = zoom_step + self.focus_lock = focus_lock + self.shot = shot + self.command_id = command_id + self.extra_param = extra_param + self.extra_value = extra_value + + def pack(self, mav): + return MAVLink_message.pack(self, mav, 242, struct.pack('>BBBBbBBBBf', self.target_system, self.target_component, self.session, self.zoom_pos, self.zoom_step, self.focus_lock, self.shot, self.command_id, self.extra_param, self.extra_value)) + +class MAVLink_mount_configure_message(MAVLink_message): + ''' + Message to configure a camera mount, directional antenna, etc. + ''' + def __init__(self, target_system, target_component, mount_mode, stab_roll, stab_pitch, stab_yaw): + MAVLink_message.__init__(self, MAVLINK_MSG_ID_MOUNT_CONFIGURE, 'MOUNT_CONFIGURE') + self._fieldnames = ['target_system', 'target_component', 'mount_mode', 'stab_roll', 'stab_pitch', 'stab_yaw'] + self.target_system = target_system + self.target_component = target_component + self.mount_mode = mount_mode + self.stab_roll = stab_roll + self.stab_pitch = stab_pitch + self.stab_yaw = stab_yaw + + def pack(self, mav): + return MAVLink_message.pack(self, mav, 19, struct.pack('>BBBBBB', self.target_system, self.target_component, self.mount_mode, self.stab_roll, self.stab_pitch, self.stab_yaw)) + +class MAVLink_mount_control_message(MAVLink_message): + ''' + Message to control a camera mount, directional antenna, etc. + ''' + def __init__(self, target_system, target_component, input_a, input_b, input_c, save_position): + MAVLink_message.__init__(self, MAVLINK_MSG_ID_MOUNT_CONTROL, 'MOUNT_CONTROL') + self._fieldnames = ['target_system', 'target_component', 'input_a', 'input_b', 'input_c', 'save_position'] + self.target_system = target_system + self.target_component = target_component + self.input_a = input_a + self.input_b = input_b + self.input_c = input_c + self.save_position = save_position + + def pack(self, mav): + return MAVLink_message.pack(self, mav, 97, struct.pack('>BBiiiB', self.target_system, self.target_component, self.input_a, self.input_b, self.input_c, self.save_position)) + +class MAVLink_mount_status_message(MAVLink_message): + ''' + Message with some status from APM to GCS about camera or + antenna mount + ''' + def __init__(self, target_system, target_component, pointing_a, pointing_b, pointing_c): + MAVLink_message.__init__(self, MAVLINK_MSG_ID_MOUNT_STATUS, 'MOUNT_STATUS') + self._fieldnames = ['target_system', 'target_component', 'pointing_a', 'pointing_b', 'pointing_c'] + self.target_system = target_system + self.target_component = target_component + self.pointing_a = pointing_a + self.pointing_b = pointing_b + self.pointing_c = pointing_c + + def pack(self, mav): + return MAVLink_message.pack(self, mav, 233, struct.pack('>BBiii', self.target_system, self.target_component, self.pointing_a, self.pointing_b, self.pointing_c)) + +class MAVLink_fence_point_message(MAVLink_message): + ''' + A fence point. Used to set a point when from GCS + -> MAV. Also used to return a point from MAV -> GCS + ''' + def __init__(self, target_system, target_component, idx, count, lat, lng): + MAVLink_message.__init__(self, MAVLINK_MSG_ID_FENCE_POINT, 'FENCE_POINT') + self._fieldnames = ['target_system', 'target_component', 'idx', 'count', 'lat', 'lng'] + self.target_system = target_system + self.target_component = target_component + self.idx = idx + self.count = count + self.lat = lat + self.lng = lng + + def pack(self, mav): + return MAVLink_message.pack(self, mav, 18, struct.pack('>BBBBff', self.target_system, self.target_component, self.idx, self.count, self.lat, self.lng)) + +class MAVLink_fence_fetch_point_message(MAVLink_message): + ''' + Request a current fence point from MAV + ''' + def __init__(self, target_system, target_component, idx): + MAVLink_message.__init__(self, MAVLINK_MSG_ID_FENCE_FETCH_POINT, 'FENCE_FETCH_POINT') + self._fieldnames = ['target_system', 'target_component', 'idx'] + self.target_system = target_system + self.target_component = target_component + self.idx = idx + + def pack(self, mav): + return MAVLink_message.pack(self, mav, 68, struct.pack('>BBB', self.target_system, self.target_component, self.idx)) + +class MAVLink_fence_status_message(MAVLink_message): + ''' + Status of geo-fencing. Sent in extended status + stream when fencing enabled + ''' + def __init__(self, breach_status, breach_count, breach_type, breach_time): + MAVLink_message.__init__(self, MAVLINK_MSG_ID_FENCE_STATUS, 'FENCE_STATUS') + self._fieldnames = ['breach_status', 'breach_count', 'breach_type', 'breach_time'] + self.breach_status = breach_status + self.breach_count = breach_count + self.breach_type = breach_type + self.breach_time = breach_time + + def pack(self, mav): + return MAVLink_message.pack(self, mav, 136, struct.pack('>BHBI', self.breach_status, self.breach_count, self.breach_type, self.breach_time)) + +class MAVLink_ahrs_message(MAVLink_message): + ''' + Status of DCM attitude estimator + ''' + def __init__(self, omegaIx, omegaIy, omegaIz, accel_weight, renorm_val, error_rp, error_yaw): + MAVLink_message.__init__(self, MAVLINK_MSG_ID_AHRS, 'AHRS') + self._fieldnames = ['omegaIx', 'omegaIy', 'omegaIz', 'accel_weight', 'renorm_val', 'error_rp', 'error_yaw'] + self.omegaIx = omegaIx + self.omegaIy = omegaIy + self.omegaIz = omegaIz + self.accel_weight = accel_weight + self.renorm_val = renorm_val + self.error_rp = error_rp + self.error_yaw = error_yaw + + def pack(self, mav): + return MAVLink_message.pack(self, mav, 127, struct.pack('>fffffff', self.omegaIx, self.omegaIy, self.omegaIz, self.accel_weight, self.renorm_val, self.error_rp, self.error_yaw)) + +class MAVLink_simstate_message(MAVLink_message): + ''' + Status of simulation environment, if used + ''' + def __init__(self, roll, pitch, yaw, xacc, yacc, zacc, xgyro, ygyro, zgyro): + MAVLink_message.__init__(self, MAVLINK_MSG_ID_SIMSTATE, 'SIMSTATE') + self._fieldnames = ['roll', 'pitch', 'yaw', 'xacc', 'yacc', 'zacc', 'xgyro', 'ygyro', 'zgyro'] + self.roll = roll + self.pitch = pitch + self.yaw = yaw + self.xacc = xacc + self.yacc = yacc + self.zacc = zacc + self.xgyro = xgyro + self.ygyro = ygyro + self.zgyro = zgyro + + def pack(self, mav): + return MAVLink_message.pack(self, mav, 42, struct.pack('>fffffffff', self.roll, self.pitch, self.yaw, self.xacc, self.yacc, self.zacc, self.xgyro, self.ygyro, self.zgyro)) + +class MAVLink_hwstatus_message(MAVLink_message): + ''' + Status of key hardware + ''' + def __init__(self, Vcc, I2Cerr): + MAVLink_message.__init__(self, MAVLINK_MSG_ID_HWSTATUS, 'HWSTATUS') + self._fieldnames = ['Vcc', 'I2Cerr'] + self.Vcc = Vcc + self.I2Cerr = I2Cerr + + def pack(self, mav): + return MAVLink_message.pack(self, mav, 21, struct.pack('>HB', self.Vcc, self.I2Cerr)) + +class MAVLink_radio_message(MAVLink_message): + ''' + Status generated by radio + ''' + def __init__(self, rssi, remrssi, txbuf, noise, remnoise, rxerrors, fixed): + MAVLink_message.__init__(self, MAVLINK_MSG_ID_RADIO, 'RADIO') + self._fieldnames = ['rssi', 'remrssi', 'txbuf', 'noise', 'remnoise', 'rxerrors', 'fixed'] + self.rssi = rssi + self.remrssi = remrssi + self.txbuf = txbuf + self.noise = noise + self.remnoise = remnoise + self.rxerrors = rxerrors + self.fixed = fixed + + def pack(self, mav): + return MAVLink_message.pack(self, mav, 93, struct.pack('>BBBBBHH', self.rssi, self.remrssi, self.txbuf, self.noise, self.remnoise, self.rxerrors, self.fixed)) + +class MAVLink_heartbeat_message(MAVLink_message): + ''' + The heartbeat message shows that a system is present and + responding. The type of the MAV and Autopilot hardware allow + the receiving system to treat further messages from this + system appropriate (e.g. by laying out the user interface + based on the autopilot). + ''' + def __init__(self, type, autopilot, mavlink_version): + MAVLink_message.__init__(self, MAVLINK_MSG_ID_HEARTBEAT, 'HEARTBEAT') + self._fieldnames = ['type', 'autopilot', 'mavlink_version'] + self.type = type + self.autopilot = autopilot + self.mavlink_version = mavlink_version + + def pack(self, mav): + return MAVLink_message.pack(self, mav, 72, struct.pack('>BBB', self.type, self.autopilot, self.mavlink_version)) + +class MAVLink_boot_message(MAVLink_message): + ''' + The boot message indicates that a system is starting. The + onboard software version allows to keep track of onboard + soft/firmware revisions. + ''' + def __init__(self, version): + MAVLink_message.__init__(self, MAVLINK_MSG_ID_BOOT, 'BOOT') + self._fieldnames = ['version'] + self.version = version + + def pack(self, mav): + return MAVLink_message.pack(self, mav, 39, struct.pack('>I', self.version)) + +class MAVLink_system_time_message(MAVLink_message): + ''' + The system time is the time of the master clock, typically the + computer clock of the main onboard computer. + ''' + def __init__(self, time_usec): + MAVLink_message.__init__(self, MAVLINK_MSG_ID_SYSTEM_TIME, 'SYSTEM_TIME') + self._fieldnames = ['time_usec'] + self.time_usec = time_usec + + def pack(self, mav): + return MAVLink_message.pack(self, mav, 190, struct.pack('>Q', self.time_usec)) + +class MAVLink_ping_message(MAVLink_message): + ''' + A ping message either requesting or responding to a ping. This + allows to measure the system latencies, including serial port, + radio modem and UDP connections. + ''' + def __init__(self, seq, target_system, target_component, time): + MAVLink_message.__init__(self, MAVLINK_MSG_ID_PING, 'PING') + self._fieldnames = ['seq', 'target_system', 'target_component', 'time'] + self.seq = seq + self.target_system = target_system + self.target_component = target_component + self.time = time + + def pack(self, mav): + return MAVLink_message.pack(self, mav, 92, struct.pack('>IBBQ', self.seq, self.target_system, self.target_component, self.time)) + +class MAVLink_system_time_utc_message(MAVLink_message): + ''' + UTC date and time from GPS module + ''' + def __init__(self, utc_date, utc_time): + MAVLink_message.__init__(self, MAVLINK_MSG_ID_SYSTEM_TIME_UTC, 'SYSTEM_TIME_UTC') + self._fieldnames = ['utc_date', 'utc_time'] + self.utc_date = utc_date + self.utc_time = utc_time + + def pack(self, mav): + return MAVLink_message.pack(self, mav, 191, struct.pack('>II', self.utc_date, self.utc_time)) + +class MAVLink_change_operator_control_message(MAVLink_message): + ''' + Request to control this MAV + ''' + def __init__(self, target_system, control_request, version, passkey): + MAVLink_message.__init__(self, MAVLINK_MSG_ID_CHANGE_OPERATOR_CONTROL, 'CHANGE_OPERATOR_CONTROL') + self._fieldnames = ['target_system', 'control_request', 'version', 'passkey'] + self.target_system = target_system + self.control_request = control_request + self.version = version + self.passkey = passkey + + def pack(self, mav): + return MAVLink_message.pack(self, mav, 217, struct.pack('>BBB25s', self.target_system, self.control_request, self.version, self.passkey)) + +class MAVLink_change_operator_control_ack_message(MAVLink_message): + ''' + Accept / deny control of this MAV + ''' + def __init__(self, gcs_system_id, control_request, ack): + MAVLink_message.__init__(self, MAVLINK_MSG_ID_CHANGE_OPERATOR_CONTROL_ACK, 'CHANGE_OPERATOR_CONTROL_ACK') + self._fieldnames = ['gcs_system_id', 'control_request', 'ack'] + self.gcs_system_id = gcs_system_id + self.control_request = control_request + self.ack = ack + + def pack(self, mav): + return MAVLink_message.pack(self, mav, 104, struct.pack('>BBB', self.gcs_system_id, self.control_request, self.ack)) + +class MAVLink_auth_key_message(MAVLink_message): + ''' + Emit an encrypted signature / key identifying this system. + PLEASE NOTE: This protocol has been kept simple, so + transmitting the key requires an encrypted channel for true + safety. + ''' + def __init__(self, key): + MAVLink_message.__init__(self, MAVLINK_MSG_ID_AUTH_KEY, 'AUTH_KEY') + self._fieldnames = ['key'] + self.key = key + + def pack(self, mav): + return MAVLink_message.pack(self, mav, 119, struct.pack('>32s', self.key)) + +class MAVLink_action_ack_message(MAVLink_message): + ''' + This message acknowledges an action. IMPORTANT: The + acknowledgement can be also negative, e.g. the MAV rejects a + reset message because it is in-flight. The action ids are + defined in ENUM MAV_ACTION in mavlink/include/mavlink_types.h + ''' + def __init__(self, action, result): + MAVLink_message.__init__(self, MAVLINK_MSG_ID_ACTION_ACK, 'ACTION_ACK') + self._fieldnames = ['action', 'result'] + self.action = action + self.result = result + + def pack(self, mav): + return MAVLink_message.pack(self, mav, 219, struct.pack('>BB', self.action, self.result)) + +class MAVLink_action_message(MAVLink_message): + ''' + An action message allows to execute a certain onboard action. + These include liftoff, land, storing parameters too EEPROM, + shutddown, etc. The action ids are defined in ENUM MAV_ACTION + in mavlink/include/mavlink_types.h + ''' + def __init__(self, target, target_component, action): + MAVLink_message.__init__(self, MAVLINK_MSG_ID_ACTION, 'ACTION') + self._fieldnames = ['target', 'target_component', 'action'] + self.target = target + self.target_component = target_component + self.action = action + + def pack(self, mav): + return MAVLink_message.pack(self, mav, 60, struct.pack('>BBB', self.target, self.target_component, self.action)) + +class MAVLink_set_mode_message(MAVLink_message): + ''' + Set the system mode, as defined by enum MAV_MODE in + mavlink/include/mavlink_types.h. There is no target component + id as the mode is by definition for the overall aircraft, not + only for one component. + ''' + def __init__(self, target, mode): + MAVLink_message.__init__(self, MAVLINK_MSG_ID_SET_MODE, 'SET_MODE') + self._fieldnames = ['target', 'mode'] + self.target = target + self.mode = mode + + def pack(self, mav): + return MAVLink_message.pack(self, mav, 186, struct.pack('>BB', self.target, self.mode)) + +class MAVLink_set_nav_mode_message(MAVLink_message): + ''' + Set the system navigation mode, as defined by enum + MAV_NAV_MODE in mavlink/include/mavlink_types.h. The + navigation mode applies to the whole aircraft and thus all + components. + ''' + def __init__(self, target, nav_mode): + MAVLink_message.__init__(self, MAVLINK_MSG_ID_SET_NAV_MODE, 'SET_NAV_MODE') + self._fieldnames = ['target', 'nav_mode'] + self.target = target + self.nav_mode = nav_mode + + def pack(self, mav): + return MAVLink_message.pack(self, mav, 10, struct.pack('>BB', self.target, self.nav_mode)) + +class MAVLink_param_request_read_message(MAVLink_message): + ''' + Request to read the onboard parameter with the param_id string + id. Onboard parameters are stored as key[const char*] -> + value[float]. This allows to send a parameter to any other + component (such as the GCS) without the need of previous + knowledge of possible parameter names. Thus the same GCS can + store different parameters for different autopilots. See also + http://qgroundcontrol.org/parameter_interface for a full + documentation of QGroundControl and IMU code. + ''' + def __init__(self, target_system, target_component, param_id, param_index): + MAVLink_message.__init__(self, MAVLINK_MSG_ID_PARAM_REQUEST_READ, 'PARAM_REQUEST_READ') + self._fieldnames = ['target_system', 'target_component', 'param_id', 'param_index'] + self.target_system = target_system + self.target_component = target_component + self.param_id = param_id + self.param_index = param_index + + def pack(self, mav): + return MAVLink_message.pack(self, mav, 89, struct.pack('>BB15sh', self.target_system, self.target_component, self.param_id, self.param_index)) + +class MAVLink_param_request_list_message(MAVLink_message): + ''' + Request all parameters of this component. After his request, + all parameters are emitted. + ''' + def __init__(self, target_system, target_component): + MAVLink_message.__init__(self, MAVLINK_MSG_ID_PARAM_REQUEST_LIST, 'PARAM_REQUEST_LIST') + self._fieldnames = ['target_system', 'target_component'] + self.target_system = target_system + self.target_component = target_component + + def pack(self, mav): + return MAVLink_message.pack(self, mav, 159, struct.pack('>BB', self.target_system, self.target_component)) + +class MAVLink_param_value_message(MAVLink_message): + ''' + Emit the value of a onboard parameter. The inclusion of + param_count and param_index in the message allows the + recipient to keep track of received parameters and allows him + to re-request missing parameters after a loss or timeout. + ''' + def __init__(self, param_id, param_value, param_count, param_index): + MAVLink_message.__init__(self, MAVLINK_MSG_ID_PARAM_VALUE, 'PARAM_VALUE') + self._fieldnames = ['param_id', 'param_value', 'param_count', 'param_index'] + self.param_id = param_id + self.param_value = param_value + self.param_count = param_count + self.param_index = param_index + + def pack(self, mav): + return MAVLink_message.pack(self, mav, 162, struct.pack('>15sfHH', self.param_id, self.param_value, self.param_count, self.param_index)) + +class MAVLink_param_set_message(MAVLink_message): + ''' + Set a parameter value TEMPORARILY to RAM. It will be reset to + default on system reboot. Send the ACTION + MAV_ACTION_STORAGE_WRITE to PERMANENTLY write the RAM contents + to EEPROM. IMPORTANT: The receiving component should + acknowledge the new parameter value by sending a param_value + message to all communication partners. This will also ensure + that multiple GCS all have an up-to-date list of all + parameters. If the sending GCS did not receive a PARAM_VALUE + message within its timeout time, it should re-send the + PARAM_SET message. + ''' + def __init__(self, target_system, target_component, param_id, param_value): + MAVLink_message.__init__(self, MAVLINK_MSG_ID_PARAM_SET, 'PARAM_SET') + self._fieldnames = ['target_system', 'target_component', 'param_id', 'param_value'] + self.target_system = target_system + self.target_component = target_component + self.param_id = param_id + self.param_value = param_value + + def pack(self, mav): + return MAVLink_message.pack(self, mav, 121, struct.pack('>BB15sf', self.target_system, self.target_component, self.param_id, self.param_value)) + +class MAVLink_gps_raw_int_message(MAVLink_message): + ''' + The global position, as returned by the Global Positioning + System (GPS). This is NOT the global position estimate of the + sytem, but rather a RAW sensor value. See message + GLOBAL_POSITION for the global position estimate. Coordinate + frame is right-handed, Z-axis up (GPS frame) + ''' + def __init__(self, usec, fix_type, lat, lon, alt, eph, epv, v, hdg): + MAVLink_message.__init__(self, MAVLINK_MSG_ID_GPS_RAW_INT, 'GPS_RAW_INT') + self._fieldnames = ['usec', 'fix_type', 'lat', 'lon', 'alt', 'eph', 'epv', 'v', 'hdg'] + self.usec = usec + self.fix_type = fix_type + self.lat = lat + self.lon = lon + self.alt = alt + self.eph = eph + self.epv = epv + self.v = v + self.hdg = hdg + + def pack(self, mav): + return MAVLink_message.pack(self, mav, 149, struct.pack('>QBiiiffff', self.usec, self.fix_type, self.lat, self.lon, self.alt, self.eph, self.epv, self.v, self.hdg)) + +class MAVLink_scaled_imu_message(MAVLink_message): + ''' + The RAW IMU readings for the usual 9DOF sensor setup. This + message should contain the scaled values to the described + units + ''' + def __init__(self, usec, xacc, yacc, zacc, xgyro, ygyro, zgyro, xmag, ymag, zmag): + MAVLink_message.__init__(self, MAVLINK_MSG_ID_SCALED_IMU, 'SCALED_IMU') + self._fieldnames = ['usec', 'xacc', 'yacc', 'zacc', 'xgyro', 'ygyro', 'zgyro', 'xmag', 'ymag', 'zmag'] + self.usec = usec + self.xacc = xacc + self.yacc = yacc + self.zacc = zacc + self.xgyro = xgyro + self.ygyro = ygyro + self.zgyro = zgyro + self.xmag = xmag + self.ymag = ymag + self.zmag = zmag + + def pack(self, mav): + return MAVLink_message.pack(self, mav, 222, struct.pack('>Qhhhhhhhhh', self.usec, self.xacc, self.yacc, self.zacc, self.xgyro, self.ygyro, self.zgyro, self.xmag, self.ymag, self.zmag)) + +class MAVLink_gps_status_message(MAVLink_message): + ''' + The positioning status, as reported by GPS. This message is + intended to display status information about each satellite + visible to the receiver. See message GLOBAL_POSITION for the + global position estimate. This message can contain information + for up to 20 satellites. + ''' + def __init__(self, satellites_visible, satellite_prn, satellite_used, satellite_elevation, satellite_azimuth, satellite_snr): + MAVLink_message.__init__(self, MAVLINK_MSG_ID_GPS_STATUS, 'GPS_STATUS') + self._fieldnames = ['satellites_visible', 'satellite_prn', 'satellite_used', 'satellite_elevation', 'satellite_azimuth', 'satellite_snr'] + self.satellites_visible = satellites_visible + self.satellite_prn = satellite_prn + self.satellite_used = satellite_used + self.satellite_elevation = satellite_elevation + self.satellite_azimuth = satellite_azimuth + self.satellite_snr = satellite_snr + + def pack(self, mav): + return MAVLink_message.pack(self, mav, 110, struct.pack('>B20s20s20s20s20s', self.satellites_visible, self.satellite_prn, self.satellite_used, self.satellite_elevation, self.satellite_azimuth, self.satellite_snr)) + +class MAVLink_raw_imu_message(MAVLink_message): + ''' + The RAW IMU readings for the usual 9DOF sensor setup. This + message should always contain the true raw values without any + scaling to allow data capture and system debugging. + ''' + def __init__(self, usec, xacc, yacc, zacc, xgyro, ygyro, zgyro, xmag, ymag, zmag): + MAVLink_message.__init__(self, MAVLINK_MSG_ID_RAW_IMU, 'RAW_IMU') + self._fieldnames = ['usec', 'xacc', 'yacc', 'zacc', 'xgyro', 'ygyro', 'zgyro', 'xmag', 'ymag', 'zmag'] + self.usec = usec + self.xacc = xacc + self.yacc = yacc + self.zacc = zacc + self.xgyro = xgyro + self.ygyro = ygyro + self.zgyro = zgyro + self.xmag = xmag + self.ymag = ymag + self.zmag = zmag + + def pack(self, mav): + return MAVLink_message.pack(self, mav, 179, struct.pack('>Qhhhhhhhhh', self.usec, self.xacc, self.yacc, self.zacc, self.xgyro, self.ygyro, self.zgyro, self.xmag, self.ymag, self.zmag)) + +class MAVLink_raw_pressure_message(MAVLink_message): + ''' + The RAW pressure readings for the typical setup of one + absolute pressure and one differential pressure sensor. The + sensor values should be the raw, UNSCALED ADC values. + ''' + def __init__(self, usec, press_abs, press_diff1, press_diff2, temperature): + MAVLink_message.__init__(self, MAVLINK_MSG_ID_RAW_PRESSURE, 'RAW_PRESSURE') + self._fieldnames = ['usec', 'press_abs', 'press_diff1', 'press_diff2', 'temperature'] + self.usec = usec + self.press_abs = press_abs + self.press_diff1 = press_diff1 + self.press_diff2 = press_diff2 + self.temperature = temperature + + def pack(self, mav): + return MAVLink_message.pack(self, mav, 136, struct.pack('>Qhhhh', self.usec, self.press_abs, self.press_diff1, self.press_diff2, self.temperature)) + +class MAVLink_scaled_pressure_message(MAVLink_message): + ''' + The pressure readings for the typical setup of one absolute + and differential pressure sensor. The units are as specified + in each field. + ''' + def __init__(self, usec, press_abs, press_diff, temperature): + MAVLink_message.__init__(self, MAVLINK_MSG_ID_SCALED_PRESSURE, 'SCALED_PRESSURE') + self._fieldnames = ['usec', 'press_abs', 'press_diff', 'temperature'] + self.usec = usec + self.press_abs = press_abs + self.press_diff = press_diff + self.temperature = temperature + + def pack(self, mav): + return MAVLink_message.pack(self, mav, 229, struct.pack('>Qffh', self.usec, self.press_abs, self.press_diff, self.temperature)) + +class MAVLink_attitude_message(MAVLink_message): + ''' + The attitude in the aeronautical frame (right-handed, Z-down, + X-front, Y-right). + ''' + def __init__(self, usec, roll, pitch, yaw, rollspeed, pitchspeed, yawspeed): + MAVLink_message.__init__(self, MAVLINK_MSG_ID_ATTITUDE, 'ATTITUDE') + self._fieldnames = ['usec', 'roll', 'pitch', 'yaw', 'rollspeed', 'pitchspeed', 'yawspeed'] + self.usec = usec + self.roll = roll + self.pitch = pitch + self.yaw = yaw + self.rollspeed = rollspeed + self.pitchspeed = pitchspeed + self.yawspeed = yawspeed + + def pack(self, mav): + return MAVLink_message.pack(self, mav, 66, struct.pack('>Qffffff', self.usec, self.roll, self.pitch, self.yaw, self.rollspeed, self.pitchspeed, self.yawspeed)) + +class MAVLink_local_position_message(MAVLink_message): + ''' + The filtered local position (e.g. fused computer vision and + accelerometers). Coordinate frame is right-handed, Z-axis down + (aeronautical frame) + ''' + def __init__(self, usec, x, y, z, vx, vy, vz): + MAVLink_message.__init__(self, MAVLINK_MSG_ID_LOCAL_POSITION, 'LOCAL_POSITION') + self._fieldnames = ['usec', 'x', 'y', 'z', 'vx', 'vy', 'vz'] + self.usec = usec + self.x = x + self.y = y + self.z = z + self.vx = vx + self.vy = vy + self.vz = vz + + def pack(self, mav): + return MAVLink_message.pack(self, mav, 126, struct.pack('>Qffffff', self.usec, self.x, self.y, self.z, self.vx, self.vy, self.vz)) + +class MAVLink_global_position_message(MAVLink_message): + ''' + The filtered global position (e.g. fused GPS and + accelerometers). Coordinate frame is right-handed, Z-axis up + (GPS frame) + ''' + def __init__(self, usec, lat, lon, alt, vx, vy, vz): + MAVLink_message.__init__(self, MAVLINK_MSG_ID_GLOBAL_POSITION, 'GLOBAL_POSITION') + self._fieldnames = ['usec', 'lat', 'lon', 'alt', 'vx', 'vy', 'vz'] + self.usec = usec + self.lat = lat + self.lon = lon + self.alt = alt + self.vx = vx + self.vy = vy + self.vz = vz + + def pack(self, mav): + return MAVLink_message.pack(self, mav, 147, struct.pack('>Qffffff', self.usec, self.lat, self.lon, self.alt, self.vx, self.vy, self.vz)) + +class MAVLink_gps_raw_message(MAVLink_message): + ''' + The global position, as returned by the Global Positioning + System (GPS). This is NOT the global position estimate of the + sytem, but rather a RAW sensor value. See message + GLOBAL_POSITION for the global position estimate. Coordinate + frame is right-handed, Z-axis up (GPS frame) + ''' + def __init__(self, usec, fix_type, lat, lon, alt, eph, epv, v, hdg): + MAVLink_message.__init__(self, MAVLINK_MSG_ID_GPS_RAW, 'GPS_RAW') + self._fieldnames = ['usec', 'fix_type', 'lat', 'lon', 'alt', 'eph', 'epv', 'v', 'hdg'] + self.usec = usec + self.fix_type = fix_type + self.lat = lat + self.lon = lon + self.alt = alt + self.eph = eph + self.epv = epv + self.v = v + self.hdg = hdg + + def pack(self, mav): + return MAVLink_message.pack(self, mav, 185, struct.pack('>QBfffffff', self.usec, self.fix_type, self.lat, self.lon, self.alt, self.eph, self.epv, self.v, self.hdg)) + +class MAVLink_sys_status_message(MAVLink_message): + ''' + The general system state. If the system is following the + MAVLink standard, the system state is mainly defined by three + orthogonal states/modes: The system mode, which is either + LOCKED (motors shut down and locked), MANUAL (system under RC + control), GUIDED (system with autonomous position control, + position setpoint controlled manually) or AUTO (system guided + by path/waypoint planner). The NAV_MODE defined the current + flight state: LIFTOFF (often an open-loop maneuver), LANDING, + WAYPOINTS or VECTOR. This represents the internal navigation + state machine. The system status shows wether the system is + currently active or not and if an emergency occured. During + the CRITICAL and EMERGENCY states the MAV is still considered + to be active, but should start emergency procedures + autonomously. After a failure occured it should first move + from active to critical to allow manual intervention and then + move to emergency after a certain timeout. + ''' + def __init__(self, mode, nav_mode, status, load, vbat, battery_remaining, packet_drop): + MAVLink_message.__init__(self, MAVLINK_MSG_ID_SYS_STATUS, 'SYS_STATUS') + self._fieldnames = ['mode', 'nav_mode', 'status', 'load', 'vbat', 'battery_remaining', 'packet_drop'] + self.mode = mode + self.nav_mode = nav_mode + self.status = status + self.load = load + self.vbat = vbat + self.battery_remaining = battery_remaining + self.packet_drop = packet_drop + + def pack(self, mav): + return MAVLink_message.pack(self, mav, 112, struct.pack('>BBBHHHH', self.mode, self.nav_mode, self.status, self.load, self.vbat, self.battery_remaining, self.packet_drop)) + +class MAVLink_rc_channels_raw_message(MAVLink_message): + ''' + The RAW values of the RC channels received. The standard PPM + modulation is as follows: 1000 microseconds: 0%, 2000 + microseconds: 100%. Individual receivers/transmitters might + violate this specification. + ''' + def __init__(self, chan1_raw, chan2_raw, chan3_raw, chan4_raw, chan5_raw, chan6_raw, chan7_raw, chan8_raw, rssi): + MAVLink_message.__init__(self, MAVLINK_MSG_ID_RC_CHANNELS_RAW, 'RC_CHANNELS_RAW') + self._fieldnames = ['chan1_raw', 'chan2_raw', 'chan3_raw', 'chan4_raw', 'chan5_raw', 'chan6_raw', 'chan7_raw', 'chan8_raw', 'rssi'] + self.chan1_raw = chan1_raw + self.chan2_raw = chan2_raw + self.chan3_raw = chan3_raw + self.chan4_raw = chan4_raw + self.chan5_raw = chan5_raw + self.chan6_raw = chan6_raw + self.chan7_raw = chan7_raw + self.chan8_raw = chan8_raw + self.rssi = rssi + + def pack(self, mav): + return MAVLink_message.pack(self, mav, 252, struct.pack('>HHHHHHHHB', self.chan1_raw, self.chan2_raw, self.chan3_raw, self.chan4_raw, self.chan5_raw, self.chan6_raw, self.chan7_raw, self.chan8_raw, self.rssi)) + +class MAVLink_rc_channels_scaled_message(MAVLink_message): + ''' + The scaled values of the RC channels received. (-100%) -10000, + (0%) 0, (100%) 10000 + ''' + def __init__(self, chan1_scaled, chan2_scaled, chan3_scaled, chan4_scaled, chan5_scaled, chan6_scaled, chan7_scaled, chan8_scaled, rssi): + MAVLink_message.__init__(self, MAVLINK_MSG_ID_RC_CHANNELS_SCALED, 'RC_CHANNELS_SCALED') + self._fieldnames = ['chan1_scaled', 'chan2_scaled', 'chan3_scaled', 'chan4_scaled', 'chan5_scaled', 'chan6_scaled', 'chan7_scaled', 'chan8_scaled', 'rssi'] + self.chan1_scaled = chan1_scaled + self.chan2_scaled = chan2_scaled + self.chan3_scaled = chan3_scaled + self.chan4_scaled = chan4_scaled + self.chan5_scaled = chan5_scaled + self.chan6_scaled = chan6_scaled + self.chan7_scaled = chan7_scaled + self.chan8_scaled = chan8_scaled + self.rssi = rssi + + def pack(self, mav): + return MAVLink_message.pack(self, mav, 162, struct.pack('>hhhhhhhhB', self.chan1_scaled, self.chan2_scaled, self.chan3_scaled, self.chan4_scaled, self.chan5_scaled, self.chan6_scaled, self.chan7_scaled, self.chan8_scaled, self.rssi)) + +class MAVLink_servo_output_raw_message(MAVLink_message): + ''' + The RAW values of the servo outputs (for RC input from the + remote, use the RC_CHANNELS messages). The standard PPM + modulation is as follows: 1000 microseconds: 0%, 2000 + microseconds: 100%. + ''' + def __init__(self, servo1_raw, servo2_raw, servo3_raw, servo4_raw, servo5_raw, servo6_raw, servo7_raw, servo8_raw): + MAVLink_message.__init__(self, MAVLINK_MSG_ID_SERVO_OUTPUT_RAW, 'SERVO_OUTPUT_RAW') + self._fieldnames = ['servo1_raw', 'servo2_raw', 'servo3_raw', 'servo4_raw', 'servo5_raw', 'servo6_raw', 'servo7_raw', 'servo8_raw'] + self.servo1_raw = servo1_raw + self.servo2_raw = servo2_raw + self.servo3_raw = servo3_raw + self.servo4_raw = servo4_raw + self.servo5_raw = servo5_raw + self.servo6_raw = servo6_raw + self.servo7_raw = servo7_raw + self.servo8_raw = servo8_raw + + def pack(self, mav): + return MAVLink_message.pack(self, mav, 215, struct.pack('>HHHHHHHH', self.servo1_raw, self.servo2_raw, self.servo3_raw, self.servo4_raw, self.servo5_raw, self.servo6_raw, self.servo7_raw, self.servo8_raw)) + +class MAVLink_waypoint_message(MAVLink_message): + ''' + Message encoding a waypoint. This message is emitted to + announce the presence of a waypoint and to set a waypoint + on the system. The waypoint can be either in x, y, z meters + (type: LOCAL) or x:lat, y:lon, z:altitude. Local frame is + Z-down, right handed, global frame is Z-up, right handed + ''' + def __init__(self, target_system, target_component, seq, frame, command, current, autocontinue, param1, param2, param3, param4, x, y, z): + MAVLink_message.__init__(self, MAVLINK_MSG_ID_WAYPOINT, 'WAYPOINT') + self._fieldnames = ['target_system', 'target_component', 'seq', 'frame', 'command', 'current', 'autocontinue', 'param1', 'param2', 'param3', 'param4', 'x', 'y', 'z'] + self.target_system = target_system + self.target_component = target_component + self.seq = seq + self.frame = frame + self.command = command + self.current = current + self.autocontinue = autocontinue + self.param1 = param1 + self.param2 = param2 + self.param3 = param3 + self.param4 = param4 + self.x = x + self.y = y + self.z = z + + def pack(self, mav): + return MAVLink_message.pack(self, mav, 128, struct.pack('>BBHBBBBfffffff', self.target_system, self.target_component, self.seq, self.frame, self.command, self.current, self.autocontinue, self.param1, self.param2, self.param3, self.param4, self.x, self.y, self.z)) + +class MAVLink_waypoint_request_message(MAVLink_message): + ''' + Request the information of the waypoint with the sequence + number seq. The response of the system to this message should + be a WAYPOINT message. + ''' + def __init__(self, target_system, target_component, seq): + MAVLink_message.__init__(self, MAVLINK_MSG_ID_WAYPOINT_REQUEST, 'WAYPOINT_REQUEST') + self._fieldnames = ['target_system', 'target_component', 'seq'] + self.target_system = target_system + self.target_component = target_component + self.seq = seq + + def pack(self, mav): + return MAVLink_message.pack(self, mav, 9, struct.pack('>BBH', self.target_system, self.target_component, self.seq)) + +class MAVLink_waypoint_set_current_message(MAVLink_message): + ''' + Set the waypoint with sequence number seq as current waypoint. + This means that the MAV will continue to this waypoint on the + shortest path (not following the waypoints in-between). + ''' + def __init__(self, target_system, target_component, seq): + MAVLink_message.__init__(self, MAVLINK_MSG_ID_WAYPOINT_SET_CURRENT, 'WAYPOINT_SET_CURRENT') + self._fieldnames = ['target_system', 'target_component', 'seq'] + self.target_system = target_system + self.target_component = target_component + self.seq = seq + + def pack(self, mav): + return MAVLink_message.pack(self, mav, 106, struct.pack('>BBH', self.target_system, self.target_component, self.seq)) + +class MAVLink_waypoint_current_message(MAVLink_message): + ''' + Message that announces the sequence number of the current + active waypoint. The MAV will fly towards this waypoint. + ''' + def __init__(self, seq): + MAVLink_message.__init__(self, MAVLINK_MSG_ID_WAYPOINT_CURRENT, 'WAYPOINT_CURRENT') + self._fieldnames = ['seq'] + self.seq = seq + + def pack(self, mav): + return MAVLink_message.pack(self, mav, 101, struct.pack('>H', self.seq)) + +class MAVLink_waypoint_request_list_message(MAVLink_message): + ''' + Request the overall list of waypoints from the + system/component. + ''' + def __init__(self, target_system, target_component): + MAVLink_message.__init__(self, MAVLINK_MSG_ID_WAYPOINT_REQUEST_LIST, 'WAYPOINT_REQUEST_LIST') + self._fieldnames = ['target_system', 'target_component'] + self.target_system = target_system + self.target_component = target_component + + def pack(self, mav): + return MAVLink_message.pack(self, mav, 213, struct.pack('>BB', self.target_system, self.target_component)) + +class MAVLink_waypoint_count_message(MAVLink_message): + ''' + This message is emitted as response to WAYPOINT_REQUEST_LIST + by the MAV. The GCS can then request the individual waypoints + based on the knowledge of the total number of waypoints. + ''' + def __init__(self, target_system, target_component, count): + MAVLink_message.__init__(self, MAVLINK_MSG_ID_WAYPOINT_COUNT, 'WAYPOINT_COUNT') + self._fieldnames = ['target_system', 'target_component', 'count'] + self.target_system = target_system + self.target_component = target_component + self.count = count + + def pack(self, mav): + return MAVLink_message.pack(self, mav, 4, struct.pack('>BBH', self.target_system, self.target_component, self.count)) + +class MAVLink_waypoint_clear_all_message(MAVLink_message): + ''' + Delete all waypoints at once. + ''' + def __init__(self, target_system, target_component): + MAVLink_message.__init__(self, MAVLINK_MSG_ID_WAYPOINT_CLEAR_ALL, 'WAYPOINT_CLEAR_ALL') + self._fieldnames = ['target_system', 'target_component'] + self.target_system = target_system + self.target_component = target_component + + def pack(self, mav): + return MAVLink_message.pack(self, mav, 229, struct.pack('>BB', self.target_system, self.target_component)) + +class MAVLink_waypoint_reached_message(MAVLink_message): + ''' + A certain waypoint has been reached. The system will either + hold this position (or circle on the orbit) or (if the + autocontinue on the WP was set) continue to the next waypoint. + ''' + def __init__(self, seq): + MAVLink_message.__init__(self, MAVLINK_MSG_ID_WAYPOINT_REACHED, 'WAYPOINT_REACHED') + self._fieldnames = ['seq'] + self.seq = seq + + def pack(self, mav): + return MAVLink_message.pack(self, mav, 21, struct.pack('>H', self.seq)) + +class MAVLink_waypoint_ack_message(MAVLink_message): + ''' + Ack message during waypoint handling. The type field states if + this message is a positive ack (type=0) or if an error + happened (type=non-zero). + ''' + def __init__(self, target_system, target_component, type): + MAVLink_message.__init__(self, MAVLINK_MSG_ID_WAYPOINT_ACK, 'WAYPOINT_ACK') + self._fieldnames = ['target_system', 'target_component', 'type'] + self.target_system = target_system + self.target_component = target_component + self.type = type + + def pack(self, mav): + return MAVLink_message.pack(self, mav, 214, struct.pack('>BBB', self.target_system, self.target_component, self.type)) + +class MAVLink_gps_set_global_origin_message(MAVLink_message): + ''' + As local waypoints exist, the global waypoint reference allows + to transform between the local coordinate frame and the global + (GPS) coordinate frame. This can be necessary when e.g. in- + and outdoor settings are connected and the MAV should move + from in- to outdoor. + ''' + def __init__(self, target_system, target_component, latitude, longitude, altitude): + MAVLink_message.__init__(self, MAVLINK_MSG_ID_GPS_SET_GLOBAL_ORIGIN, 'GPS_SET_GLOBAL_ORIGIN') + self._fieldnames = ['target_system', 'target_component', 'latitude', 'longitude', 'altitude'] + self.target_system = target_system + self.target_component = target_component + self.latitude = latitude + self.longitude = longitude + self.altitude = altitude + + def pack(self, mav): + return MAVLink_message.pack(self, mav, 215, struct.pack('>BBiii', self.target_system, self.target_component, self.latitude, self.longitude, self.altitude)) + +class MAVLink_gps_local_origin_set_message(MAVLink_message): + ''' + Once the MAV sets a new GPS-Local correspondence, this message + announces the origin (0,0,0) position + ''' + def __init__(self, latitude, longitude, altitude): + MAVLink_message.__init__(self, MAVLINK_MSG_ID_GPS_LOCAL_ORIGIN_SET, 'GPS_LOCAL_ORIGIN_SET') + self._fieldnames = ['latitude', 'longitude', 'altitude'] + self.latitude = latitude + self.longitude = longitude + self.altitude = altitude + + def pack(self, mav): + return MAVLink_message.pack(self, mav, 14, struct.pack('>iii', self.latitude, self.longitude, self.altitude)) + +class MAVLink_local_position_setpoint_set_message(MAVLink_message): + ''' + Set the setpoint for a local position controller. This is the + position in local coordinates the MAV should fly to. This + message is sent by the path/waypoint planner to the onboard + position controller. As some MAVs have a degree of freedom in + yaw (e.g. all helicopters/quadrotors), the desired yaw angle + is part of the message. + ''' + def __init__(self, target_system, target_component, x, y, z, yaw): + MAVLink_message.__init__(self, MAVLINK_MSG_ID_LOCAL_POSITION_SETPOINT_SET, 'LOCAL_POSITION_SETPOINT_SET') + self._fieldnames = ['target_system', 'target_component', 'x', 'y', 'z', 'yaw'] + self.target_system = target_system + self.target_component = target_component + self.x = x + self.y = y + self.z = z + self.yaw = yaw + + def pack(self, mav): + return MAVLink_message.pack(self, mav, 206, struct.pack('>BBffff', self.target_system, self.target_component, self.x, self.y, self.z, self.yaw)) + +class MAVLink_local_position_setpoint_message(MAVLink_message): + ''' + Transmit the current local setpoint of the controller to other + MAVs (collision avoidance) and to the GCS. + ''' + def __init__(self, x, y, z, yaw): + MAVLink_message.__init__(self, MAVLINK_MSG_ID_LOCAL_POSITION_SETPOINT, 'LOCAL_POSITION_SETPOINT') + self._fieldnames = ['x', 'y', 'z', 'yaw'] + self.x = x + self.y = y + self.z = z + self.yaw = yaw + + def pack(self, mav): + return MAVLink_message.pack(self, mav, 50, struct.pack('>ffff', self.x, self.y, self.z, self.yaw)) + +class MAVLink_control_status_message(MAVLink_message): + ''' + + ''' + def __init__(self, position_fix, vision_fix, gps_fix, ahrs_health, control_att, control_pos_xy, control_pos_z, control_pos_yaw): + MAVLink_message.__init__(self, MAVLINK_MSG_ID_CONTROL_STATUS, 'CONTROL_STATUS') + self._fieldnames = ['position_fix', 'vision_fix', 'gps_fix', 'ahrs_health', 'control_att', 'control_pos_xy', 'control_pos_z', 'control_pos_yaw'] + self.position_fix = position_fix + self.vision_fix = vision_fix + self.gps_fix = gps_fix + self.ahrs_health = ahrs_health + self.control_att = control_att + self.control_pos_xy = control_pos_xy + self.control_pos_z = control_pos_z + self.control_pos_yaw = control_pos_yaw + + def pack(self, mav): + return MAVLink_message.pack(self, mav, 157, struct.pack('>BBBBBBBB', self.position_fix, self.vision_fix, self.gps_fix, self.ahrs_health, self.control_att, self.control_pos_xy, self.control_pos_z, self.control_pos_yaw)) + +class MAVLink_safety_set_allowed_area_message(MAVLink_message): + ''' + Set a safety zone (volume), which is defined by two corners of + a cube. This message can be used to tell the MAV which + setpoints/waypoints to accept and which to reject. Safety + areas are often enforced by national or competition + regulations. + ''' + def __init__(self, target_system, target_component, frame, p1x, p1y, p1z, p2x, p2y, p2z): + MAVLink_message.__init__(self, MAVLINK_MSG_ID_SAFETY_SET_ALLOWED_AREA, 'SAFETY_SET_ALLOWED_AREA') + self._fieldnames = ['target_system', 'target_component', 'frame', 'p1x', 'p1y', 'p1z', 'p2x', 'p2y', 'p2z'] + self.target_system = target_system + self.target_component = target_component + self.frame = frame + self.p1x = p1x + self.p1y = p1y + self.p1z = p1z + self.p2x = p2x + self.p2y = p2y + self.p2z = p2z + + def pack(self, mav): + return MAVLink_message.pack(self, mav, 126, struct.pack('>BBBffffff', self.target_system, self.target_component, self.frame, self.p1x, self.p1y, self.p1z, self.p2x, self.p2y, self.p2z)) + +class MAVLink_safety_allowed_area_message(MAVLink_message): + ''' + Read out the safety zone the MAV currently assumes. + ''' + def __init__(self, frame, p1x, p1y, p1z, p2x, p2y, p2z): + MAVLink_message.__init__(self, MAVLINK_MSG_ID_SAFETY_ALLOWED_AREA, 'SAFETY_ALLOWED_AREA') + self._fieldnames = ['frame', 'p1x', 'p1y', 'p1z', 'p2x', 'p2y', 'p2z'] + self.frame = frame + self.p1x = p1x + self.p1y = p1y + self.p1z = p1z + self.p2x = p2x + self.p2y = p2y + self.p2z = p2z + + def pack(self, mav): + return MAVLink_message.pack(self, mav, 108, struct.pack('>Bffffff', self.frame, self.p1x, self.p1y, self.p1z, self.p2x, self.p2y, self.p2z)) + +class MAVLink_set_roll_pitch_yaw_thrust_message(MAVLink_message): + ''' + Set roll, pitch and yaw. + ''' + def __init__(self, target_system, target_component, roll, pitch, yaw, thrust): + MAVLink_message.__init__(self, MAVLINK_MSG_ID_SET_ROLL_PITCH_YAW_THRUST, 'SET_ROLL_PITCH_YAW_THRUST') + self._fieldnames = ['target_system', 'target_component', 'roll', 'pitch', 'yaw', 'thrust'] + self.target_system = target_system + self.target_component = target_component + self.roll = roll + self.pitch = pitch + self.yaw = yaw + self.thrust = thrust + + def pack(self, mav): + return MAVLink_message.pack(self, mav, 213, struct.pack('>BBffff', self.target_system, self.target_component, self.roll, self.pitch, self.yaw, self.thrust)) + +class MAVLink_set_roll_pitch_yaw_speed_thrust_message(MAVLink_message): + ''' + Set roll, pitch and yaw. + ''' + def __init__(self, target_system, target_component, roll_speed, pitch_speed, yaw_speed, thrust): + MAVLink_message.__init__(self, MAVLINK_MSG_ID_SET_ROLL_PITCH_YAW_SPEED_THRUST, 'SET_ROLL_PITCH_YAW_SPEED_THRUST') + self._fieldnames = ['target_system', 'target_component', 'roll_speed', 'pitch_speed', 'yaw_speed', 'thrust'] + self.target_system = target_system + self.target_component = target_component + self.roll_speed = roll_speed + self.pitch_speed = pitch_speed + self.yaw_speed = yaw_speed + self.thrust = thrust + + def pack(self, mav): + return MAVLink_message.pack(self, mav, 95, struct.pack('>BBffff', self.target_system, self.target_component, self.roll_speed, self.pitch_speed, self.yaw_speed, self.thrust)) + +class MAVLink_roll_pitch_yaw_thrust_setpoint_message(MAVLink_message): + ''' + Setpoint in roll, pitch, yaw currently active on the system. + ''' + def __init__(self, time_us, roll, pitch, yaw, thrust): + MAVLink_message.__init__(self, MAVLINK_MSG_ID_ROLL_PITCH_YAW_THRUST_SETPOINT, 'ROLL_PITCH_YAW_THRUST_SETPOINT') + self._fieldnames = ['time_us', 'roll', 'pitch', 'yaw', 'thrust'] + self.time_us = time_us + self.roll = roll + self.pitch = pitch + self.yaw = yaw + self.thrust = thrust + + def pack(self, mav): + return MAVLink_message.pack(self, mav, 5, struct.pack('>Qffff', self.time_us, self.roll, self.pitch, self.yaw, self.thrust)) + +class MAVLink_roll_pitch_yaw_speed_thrust_setpoint_message(MAVLink_message): + ''' + Setpoint in rollspeed, pitchspeed, yawspeed currently active + on the system. + ''' + def __init__(self, time_us, roll_speed, pitch_speed, yaw_speed, thrust): + MAVLink_message.__init__(self, MAVLINK_MSG_ID_ROLL_PITCH_YAW_SPEED_THRUST_SETPOINT, 'ROLL_PITCH_YAW_SPEED_THRUST_SETPOINT') + self._fieldnames = ['time_us', 'roll_speed', 'pitch_speed', 'yaw_speed', 'thrust'] + self.time_us = time_us + self.roll_speed = roll_speed + self.pitch_speed = pitch_speed + self.yaw_speed = yaw_speed + self.thrust = thrust + + def pack(self, mav): + return MAVLink_message.pack(self, mav, 127, struct.pack('>Qffff', self.time_us, self.roll_speed, self.pitch_speed, self.yaw_speed, self.thrust)) + +class MAVLink_nav_controller_output_message(MAVLink_message): + ''' + Outputs of the APM navigation controller. The primary use of + this message is to check the response and signs of the + controller before actual flight and to assist with tuning + controller parameters + ''' + def __init__(self, nav_roll, nav_pitch, nav_bearing, target_bearing, wp_dist, alt_error, aspd_error, xtrack_error): + MAVLink_message.__init__(self, MAVLINK_MSG_ID_NAV_CONTROLLER_OUTPUT, 'NAV_CONTROLLER_OUTPUT') + self._fieldnames = ['nav_roll', 'nav_pitch', 'nav_bearing', 'target_bearing', 'wp_dist', 'alt_error', 'aspd_error', 'xtrack_error'] + self.nav_roll = nav_roll + self.nav_pitch = nav_pitch + self.nav_bearing = nav_bearing + self.target_bearing = target_bearing + self.wp_dist = wp_dist + self.alt_error = alt_error + self.aspd_error = aspd_error + self.xtrack_error = xtrack_error + + def pack(self, mav): + return MAVLink_message.pack(self, mav, 57, struct.pack('>ffhhHfff', self.nav_roll, self.nav_pitch, self.nav_bearing, self.target_bearing, self.wp_dist, self.alt_error, self.aspd_error, self.xtrack_error)) + +class MAVLink_position_target_message(MAVLink_message): + ''' + The goal position of the system. This position is the input to + any navigation or path planning algorithm and does NOT + represent the current controller setpoint. + ''' + def __init__(self, x, y, z, yaw): + MAVLink_message.__init__(self, MAVLINK_MSG_ID_POSITION_TARGET, 'POSITION_TARGET') + self._fieldnames = ['x', 'y', 'z', 'yaw'] + self.x = x + self.y = y + self.z = z + self.yaw = yaw + + def pack(self, mav): + return MAVLink_message.pack(self, mav, 126, struct.pack('>ffff', self.x, self.y, self.z, self.yaw)) + +class MAVLink_state_correction_message(MAVLink_message): + ''' + Corrects the systems state by adding an error correction term + to the position and velocity, and by rotating the attitude by + a correction angle. + ''' + def __init__(self, xErr, yErr, zErr, rollErr, pitchErr, yawErr, vxErr, vyErr, vzErr): + MAVLink_message.__init__(self, MAVLINK_MSG_ID_STATE_CORRECTION, 'STATE_CORRECTION') + self._fieldnames = ['xErr', 'yErr', 'zErr', 'rollErr', 'pitchErr', 'yawErr', 'vxErr', 'vyErr', 'vzErr'] + self.xErr = xErr + self.yErr = yErr + self.zErr = zErr + self.rollErr = rollErr + self.pitchErr = pitchErr + self.yawErr = yawErr + self.vxErr = vxErr + self.vyErr = vyErr + self.vzErr = vzErr + + def pack(self, mav): + return MAVLink_message.pack(self, mav, 130, struct.pack('>fffffffff', self.xErr, self.yErr, self.zErr, self.rollErr, self.pitchErr, self.yawErr, self.vxErr, self.vyErr, self.vzErr)) + +class MAVLink_set_altitude_message(MAVLink_message): + ''' + + ''' + def __init__(self, target, mode): + MAVLink_message.__init__(self, MAVLINK_MSG_ID_SET_ALTITUDE, 'SET_ALTITUDE') + self._fieldnames = ['target', 'mode'] + self.target = target + self.mode = mode + + def pack(self, mav): + return MAVLink_message.pack(self, mav, 119, struct.pack('>BI', self.target, self.mode)) + +class MAVLink_request_data_stream_message(MAVLink_message): + ''' + + ''' + def __init__(self, target_system, target_component, req_stream_id, req_message_rate, start_stop): + MAVLink_message.__init__(self, MAVLINK_MSG_ID_REQUEST_DATA_STREAM, 'REQUEST_DATA_STREAM') + self._fieldnames = ['target_system', 'target_component', 'req_stream_id', 'req_message_rate', 'start_stop'] + self.target_system = target_system + self.target_component = target_component + self.req_stream_id = req_stream_id + self.req_message_rate = req_message_rate + self.start_stop = start_stop + + def pack(self, mav): + return MAVLink_message.pack(self, mav, 193, struct.pack('>BBBHB', self.target_system, self.target_component, self.req_stream_id, self.req_message_rate, self.start_stop)) + +class MAVLink_hil_state_message(MAVLink_message): + ''' + This packet is useful for high throughput + applications such as hardware in the loop simulations. + ''' + def __init__(self, usec, roll, pitch, yaw, rollspeed, pitchspeed, yawspeed, lat, lon, alt, vx, vy, vz, xacc, yacc, zacc): + MAVLink_message.__init__(self, MAVLINK_MSG_ID_HIL_STATE, 'HIL_STATE') + self._fieldnames = ['usec', 'roll', 'pitch', 'yaw', 'rollspeed', 'pitchspeed', 'yawspeed', 'lat', 'lon', 'alt', 'vx', 'vy', 'vz', 'xacc', 'yacc', 'zacc'] + self.usec = usec + self.roll = roll + self.pitch = pitch + self.yaw = yaw + self.rollspeed = rollspeed + self.pitchspeed = pitchspeed + self.yawspeed = yawspeed + self.lat = lat + self.lon = lon + self.alt = alt + self.vx = vx + self.vy = vy + self.vz = vz + self.xacc = xacc + self.yacc = yacc + self.zacc = zacc + + def pack(self, mav): + return MAVLink_message.pack(self, mav, 191, struct.pack('>Qffffffiiihhhhhh', self.usec, self.roll, self.pitch, self.yaw, self.rollspeed, self.pitchspeed, self.yawspeed, self.lat, self.lon, self.alt, self.vx, self.vy, self.vz, self.xacc, self.yacc, self.zacc)) + +class MAVLink_hil_controls_message(MAVLink_message): + ''' + Hardware in the loop control outputs + ''' + def __init__(self, time_us, roll_ailerons, pitch_elevator, yaw_rudder, throttle, mode, nav_mode): + MAVLink_message.__init__(self, MAVLINK_MSG_ID_HIL_CONTROLS, 'HIL_CONTROLS') + self._fieldnames = ['time_us', 'roll_ailerons', 'pitch_elevator', 'yaw_rudder', 'throttle', 'mode', 'nav_mode'] + self.time_us = time_us + self.roll_ailerons = roll_ailerons + self.pitch_elevator = pitch_elevator + self.yaw_rudder = yaw_rudder + self.throttle = throttle + self.mode = mode + self.nav_mode = nav_mode + + def pack(self, mav): + return MAVLink_message.pack(self, mav, 236, struct.pack('>QffffBB', self.time_us, self.roll_ailerons, self.pitch_elevator, self.yaw_rudder, self.throttle, self.mode, self.nav_mode)) + +class MAVLink_manual_control_message(MAVLink_message): + ''' + + ''' + def __init__(self, target, roll, pitch, yaw, thrust, roll_manual, pitch_manual, yaw_manual, thrust_manual): + MAVLink_message.__init__(self, MAVLINK_MSG_ID_MANUAL_CONTROL, 'MANUAL_CONTROL') + self._fieldnames = ['target', 'roll', 'pitch', 'yaw', 'thrust', 'roll_manual', 'pitch_manual', 'yaw_manual', 'thrust_manual'] + self.target = target + self.roll = roll + self.pitch = pitch + self.yaw = yaw + self.thrust = thrust + self.roll_manual = roll_manual + self.pitch_manual = pitch_manual + self.yaw_manual = yaw_manual + self.thrust_manual = thrust_manual + + def pack(self, mav): + return MAVLink_message.pack(self, mav, 158, struct.pack('>BffffBBBB', self.target, self.roll, self.pitch, self.yaw, self.thrust, self.roll_manual, self.pitch_manual, self.yaw_manual, self.thrust_manual)) + +class MAVLink_rc_channels_override_message(MAVLink_message): + ''' + The RAW values of the RC channels sent to the MAV to override + info received from the RC radio. A value of -1 means no change + to that channel. A value of 0 means control of that channel + should be released back to the RC radio. The standard PPM + modulation is as follows: 1000 microseconds: 0%, 2000 + microseconds: 100%. Individual receivers/transmitters might + violate this specification. + ''' + def __init__(self, target_system, target_component, chan1_raw, chan2_raw, chan3_raw, chan4_raw, chan5_raw, chan6_raw, chan7_raw, chan8_raw): + MAVLink_message.__init__(self, MAVLINK_MSG_ID_RC_CHANNELS_OVERRIDE, 'RC_CHANNELS_OVERRIDE') + self._fieldnames = ['target_system', 'target_component', 'chan1_raw', 'chan2_raw', 'chan3_raw', 'chan4_raw', 'chan5_raw', 'chan6_raw', 'chan7_raw', 'chan8_raw'] + self.target_system = target_system + self.target_component = target_component + self.chan1_raw = chan1_raw + self.chan2_raw = chan2_raw + self.chan3_raw = chan3_raw + self.chan4_raw = chan4_raw + self.chan5_raw = chan5_raw + self.chan6_raw = chan6_raw + self.chan7_raw = chan7_raw + self.chan8_raw = chan8_raw + + def pack(self, mav): + return MAVLink_message.pack(self, mav, 143, struct.pack('>BBHHHHHHHH', self.target_system, self.target_component, self.chan1_raw, self.chan2_raw, self.chan3_raw, self.chan4_raw, self.chan5_raw, self.chan6_raw, self.chan7_raw, self.chan8_raw)) + +class MAVLink_global_position_int_message(MAVLink_message): + ''' + The filtered global position (e.g. fused GPS and + accelerometers). The position is in GPS-frame (right-handed, + Z-up) + ''' + def __init__(self, lat, lon, alt, vx, vy, vz): + MAVLink_message.__init__(self, MAVLINK_MSG_ID_GLOBAL_POSITION_INT, 'GLOBAL_POSITION_INT') + self._fieldnames = ['lat', 'lon', 'alt', 'vx', 'vy', 'vz'] + self.lat = lat + self.lon = lon + self.alt = alt + self.vx = vx + self.vy = vy + self.vz = vz + + def pack(self, mav): + return MAVLink_message.pack(self, mav, 104, struct.pack('>iiihhh', self.lat, self.lon, self.alt, self.vx, self.vy, self.vz)) + +class MAVLink_vfr_hud_message(MAVLink_message): + ''' + Metrics typically displayed on a HUD for fixed wing aircraft + ''' + def __init__(self, airspeed, groundspeed, heading, throttle, alt, climb): + MAVLink_message.__init__(self, MAVLINK_MSG_ID_VFR_HUD, 'VFR_HUD') + self._fieldnames = ['airspeed', 'groundspeed', 'heading', 'throttle', 'alt', 'climb'] + self.airspeed = airspeed + self.groundspeed = groundspeed + self.heading = heading + self.throttle = throttle + self.alt = alt + self.climb = climb + + def pack(self, mav): + return MAVLink_message.pack(self, mav, 123, struct.pack('>ffhHff', self.airspeed, self.groundspeed, self.heading, self.throttle, self.alt, self.climb)) + +class MAVLink_command_message(MAVLink_message): + ''' + Send a command with up to four parameters to the MAV + ''' + def __init__(self, target_system, target_component, command, confirmation, param1, param2, param3, param4): + MAVLink_message.__init__(self, MAVLINK_MSG_ID_COMMAND, 'COMMAND') + self._fieldnames = ['target_system', 'target_component', 'command', 'confirmation', 'param1', 'param2', 'param3', 'param4'] + self.target_system = target_system + self.target_component = target_component + self.command = command + self.confirmation = confirmation + self.param1 = param1 + self.param2 = param2 + self.param3 = param3 + self.param4 = param4 + + def pack(self, mav): + return MAVLink_message.pack(self, mav, 131, struct.pack('>BBBBffff', self.target_system, self.target_component, self.command, self.confirmation, self.param1, self.param2, self.param3, self.param4)) + +class MAVLink_command_ack_message(MAVLink_message): + ''' + Report status of a command. Includes feedback wether the + command was executed + ''' + def __init__(self, command, result): + MAVLink_message.__init__(self, MAVLINK_MSG_ID_COMMAND_ACK, 'COMMAND_ACK') + self._fieldnames = ['command', 'result'] + self.command = command + self.result = result + + def pack(self, mav): + return MAVLink_message.pack(self, mav, 8, struct.pack('>ff', self.command, self.result)) + +class MAVLink_optical_flow_message(MAVLink_message): + ''' + Optical flow from a flow sensor (e.g. optical mouse sensor) + ''' + def __init__(self, time, sensor_id, flow_x, flow_y, quality, ground_distance): + MAVLink_message.__init__(self, MAVLINK_MSG_ID_OPTICAL_FLOW, 'OPTICAL_FLOW') + self._fieldnames = ['time', 'sensor_id', 'flow_x', 'flow_y', 'quality', 'ground_distance'] + self.time = time + self.sensor_id = sensor_id + self.flow_x = flow_x + self.flow_y = flow_y + self.quality = quality + self.ground_distance = ground_distance + + def pack(self, mav): + return MAVLink_message.pack(self, mav, 174, struct.pack('>QBhhBf', self.time, self.sensor_id, self.flow_x, self.flow_y, self.quality, self.ground_distance)) + +class MAVLink_object_detection_event_message(MAVLink_message): + ''' + Object has been detected + ''' + def __init__(self, time, object_id, type, name, quality, bearing, distance): + MAVLink_message.__init__(self, MAVLINK_MSG_ID_OBJECT_DETECTION_EVENT, 'OBJECT_DETECTION_EVENT') + self._fieldnames = ['time', 'object_id', 'type', 'name', 'quality', 'bearing', 'distance'] + self.time = time + self.object_id = object_id + self.type = type + self.name = name + self.quality = quality + self.bearing = bearing + self.distance = distance + + def pack(self, mav): + return MAVLink_message.pack(self, mav, 155, struct.pack('>IHB20sBff', self.time, self.object_id, self.type, self.name, self.quality, self.bearing, self.distance)) + +class MAVLink_debug_vect_message(MAVLink_message): + ''' + + ''' + def __init__(self, name, usec, x, y, z): + MAVLink_message.__init__(self, MAVLINK_MSG_ID_DEBUG_VECT, 'DEBUG_VECT') + self._fieldnames = ['name', 'usec', 'x', 'y', 'z'] + self.name = name + self.usec = usec + self.x = x + self.y = y + self.z = z + + def pack(self, mav): + return MAVLink_message.pack(self, mav, 178, struct.pack('>10sQfff', self.name, self.usec, self.x, self.y, self.z)) + +class MAVLink_named_value_float_message(MAVLink_message): + ''' + Send a key-value pair as float. The use of this message is + discouraged for normal packets, but a quite efficient way for + testing new messages and getting experimental debug output. + ''' + def __init__(self, name, value): + MAVLink_message.__init__(self, MAVLINK_MSG_ID_NAMED_VALUE_FLOAT, 'NAMED_VALUE_FLOAT') + self._fieldnames = ['name', 'value'] + self.name = name + self.value = value + + def pack(self, mav): + return MAVLink_message.pack(self, mav, 224, struct.pack('>10sf', self.name, self.value)) + +class MAVLink_named_value_int_message(MAVLink_message): + ''' + Send a key-value pair as integer. The use of this message is + discouraged for normal packets, but a quite efficient way for + testing new messages and getting experimental debug output. + ''' + def __init__(self, name, value): + MAVLink_message.__init__(self, MAVLINK_MSG_ID_NAMED_VALUE_INT, 'NAMED_VALUE_INT') + self._fieldnames = ['name', 'value'] + self.name = name + self.value = value + + def pack(self, mav): + return MAVLink_message.pack(self, mav, 60, struct.pack('>10si', self.name, self.value)) + +class MAVLink_statustext_message(MAVLink_message): + ''' + Status text message. These messages are printed in yellow in + the COMM console of QGroundControl. WARNING: They consume + quite some bandwidth, so use only for important status and + error messages. If implemented wisely, these messages are + buffered on the MCU and sent only at a limited rate (e.g. 10 + Hz). + ''' + def __init__(self, severity, text): + MAVLink_message.__init__(self, MAVLINK_MSG_ID_STATUSTEXT, 'STATUSTEXT') + self._fieldnames = ['severity', 'text'] + self.severity = severity + self.text = text + + def pack(self, mav): + return MAVLink_message.pack(self, mav, 106, struct.pack('>B50s', self.severity, self.text)) + +class MAVLink_debug_message(MAVLink_message): + ''' + Send a debug value. The index is used to discriminate between + values. These values show up in the plot of QGroundControl as + DEBUG N. + ''' + def __init__(self, ind, value): + MAVLink_message.__init__(self, MAVLINK_MSG_ID_DEBUG, 'DEBUG') + self._fieldnames = ['ind', 'value'] + self.ind = ind + self.value = value + + def pack(self, mav): + return MAVLink_message.pack(self, mav, 7, struct.pack('>Bf', self.ind, self.value)) + + +mavlink_map = { + MAVLINK_MSG_ID_SENSOR_OFFSETS : ( '>hhhfiiffffff', MAVLink_sensor_offsets_message, [0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11], 143 ), + MAVLINK_MSG_ID_SET_MAG_OFFSETS : ( '>BBhhh', MAVLink_set_mag_offsets_message, [0, 1, 2, 3, 4], 29 ), + MAVLINK_MSG_ID_MEMINFO : ( '>HH', MAVLink_meminfo_message, [0, 1], 208 ), + MAVLINK_MSG_ID_AP_ADC : ( '>HHHHHH', MAVLink_ap_adc_message, [0, 1, 2, 3, 4, 5], 188 ), + MAVLINK_MSG_ID_DIGICAM_CONFIGURE : ( '>BBBHBBBBBBf', MAVLink_digicam_configure_message, [0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10], 118 ), + MAVLINK_MSG_ID_DIGICAM_CONTROL : ( '>BBBBbBBBBf', MAVLink_digicam_control_message, [0, 1, 2, 3, 4, 5, 6, 7, 8, 9], 242 ), + MAVLINK_MSG_ID_MOUNT_CONFIGURE : ( '>BBBBBB', MAVLink_mount_configure_message, [0, 1, 2, 3, 4, 5], 19 ), + MAVLINK_MSG_ID_MOUNT_CONTROL : ( '>BBiiiB', MAVLink_mount_control_message, [0, 1, 2, 3, 4, 5], 97 ), + MAVLINK_MSG_ID_MOUNT_STATUS : ( '>BBiii', MAVLink_mount_status_message, [0, 1, 2, 3, 4], 233 ), + MAVLINK_MSG_ID_FENCE_POINT : ( '>BBBBff', MAVLink_fence_point_message, [0, 1, 2, 3, 4, 5], 18 ), + MAVLINK_MSG_ID_FENCE_FETCH_POINT : ( '>BBB', MAVLink_fence_fetch_point_message, [0, 1, 2], 68 ), + MAVLINK_MSG_ID_FENCE_STATUS : ( '>BHBI', MAVLink_fence_status_message, [0, 1, 2, 3], 136 ), + MAVLINK_MSG_ID_AHRS : ( '>fffffff', MAVLink_ahrs_message, [0, 1, 2, 3, 4, 5, 6], 127 ), + MAVLINK_MSG_ID_SIMSTATE : ( '>fffffffff', MAVLink_simstate_message, [0, 1, 2, 3, 4, 5, 6, 7, 8], 42 ), + MAVLINK_MSG_ID_HWSTATUS : ( '>HB', MAVLink_hwstatus_message, [0, 1], 21 ), + MAVLINK_MSG_ID_RADIO : ( '>BBBBBHH', MAVLink_radio_message, [0, 1, 2, 3, 4, 5, 6], 93 ), + MAVLINK_MSG_ID_HEARTBEAT : ( '>BBB', MAVLink_heartbeat_message, [0, 1, 2], 72 ), + MAVLINK_MSG_ID_BOOT : ( '>I', MAVLink_boot_message, [0], 39 ), + MAVLINK_MSG_ID_SYSTEM_TIME : ( '>Q', MAVLink_system_time_message, [0], 190 ), + MAVLINK_MSG_ID_PING : ( '>IBBQ', MAVLink_ping_message, [0, 1, 2, 3], 92 ), + MAVLINK_MSG_ID_SYSTEM_TIME_UTC : ( '>II', MAVLink_system_time_utc_message, [0, 1], 191 ), + MAVLINK_MSG_ID_CHANGE_OPERATOR_CONTROL : ( '>BBB25s', MAVLink_change_operator_control_message, [0, 1, 2, 3], 217 ), + MAVLINK_MSG_ID_CHANGE_OPERATOR_CONTROL_ACK : ( '>BBB', MAVLink_change_operator_control_ack_message, [0, 1, 2], 104 ), + MAVLINK_MSG_ID_AUTH_KEY : ( '>32s', MAVLink_auth_key_message, [0], 119 ), + MAVLINK_MSG_ID_ACTION_ACK : ( '>BB', MAVLink_action_ack_message, [0, 1], 219 ), + MAVLINK_MSG_ID_ACTION : ( '>BBB', MAVLink_action_message, [0, 1, 2], 60 ), + MAVLINK_MSG_ID_SET_MODE : ( '>BB', MAVLink_set_mode_message, [0, 1], 186 ), + MAVLINK_MSG_ID_SET_NAV_MODE : ( '>BB', MAVLink_set_nav_mode_message, [0, 1], 10 ), + MAVLINK_MSG_ID_PARAM_REQUEST_READ : ( '>BB15sh', MAVLink_param_request_read_message, [0, 1, 2, 3], 89 ), + MAVLINK_MSG_ID_PARAM_REQUEST_LIST : ( '>BB', MAVLink_param_request_list_message, [0, 1], 159 ), + MAVLINK_MSG_ID_PARAM_VALUE : ( '>15sfHH', MAVLink_param_value_message, [0, 1, 2, 3], 162 ), + MAVLINK_MSG_ID_PARAM_SET : ( '>BB15sf', MAVLink_param_set_message, [0, 1, 2, 3], 121 ), + MAVLINK_MSG_ID_GPS_RAW_INT : ( '>QBiiiffff', MAVLink_gps_raw_int_message, [0, 1, 2, 3, 4, 5, 6, 7, 8], 149 ), + MAVLINK_MSG_ID_SCALED_IMU : ( '>Qhhhhhhhhh', MAVLink_scaled_imu_message, [0, 1, 2, 3, 4, 5, 6, 7, 8, 9], 222 ), + MAVLINK_MSG_ID_GPS_STATUS : ( '>B20s20s20s20s20s', MAVLink_gps_status_message, [0, 1, 2, 3, 4, 5], 110 ), + MAVLINK_MSG_ID_RAW_IMU : ( '>Qhhhhhhhhh', MAVLink_raw_imu_message, [0, 1, 2, 3, 4, 5, 6, 7, 8, 9], 179 ), + MAVLINK_MSG_ID_RAW_PRESSURE : ( '>Qhhhh', MAVLink_raw_pressure_message, [0, 1, 2, 3, 4], 136 ), + MAVLINK_MSG_ID_SCALED_PRESSURE : ( '>Qffh', MAVLink_scaled_pressure_message, [0, 1, 2, 3], 229 ), + MAVLINK_MSG_ID_ATTITUDE : ( '>Qffffff', MAVLink_attitude_message, [0, 1, 2, 3, 4, 5, 6], 66 ), + MAVLINK_MSG_ID_LOCAL_POSITION : ( '>Qffffff', MAVLink_local_position_message, [0, 1, 2, 3, 4, 5, 6], 126 ), + MAVLINK_MSG_ID_GLOBAL_POSITION : ( '>Qffffff', MAVLink_global_position_message, [0, 1, 2, 3, 4, 5, 6], 147 ), + MAVLINK_MSG_ID_GPS_RAW : ( '>QBfffffff', MAVLink_gps_raw_message, [0, 1, 2, 3, 4, 5, 6, 7, 8], 185 ), + MAVLINK_MSG_ID_SYS_STATUS : ( '>BBBHHHH', MAVLink_sys_status_message, [0, 1, 2, 3, 4, 5, 6], 112 ), + MAVLINK_MSG_ID_RC_CHANNELS_RAW : ( '>HHHHHHHHB', MAVLink_rc_channels_raw_message, [0, 1, 2, 3, 4, 5, 6, 7, 8], 252 ), + MAVLINK_MSG_ID_RC_CHANNELS_SCALED : ( '>hhhhhhhhB', MAVLink_rc_channels_scaled_message, [0, 1, 2, 3, 4, 5, 6, 7, 8], 162 ), + MAVLINK_MSG_ID_SERVO_OUTPUT_RAW : ( '>HHHHHHHH', MAVLink_servo_output_raw_message, [0, 1, 2, 3, 4, 5, 6, 7], 215 ), + MAVLINK_MSG_ID_WAYPOINT : ( '>BBHBBBBfffffff', MAVLink_waypoint_message, [0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13], 128 ), + MAVLINK_MSG_ID_WAYPOINT_REQUEST : ( '>BBH', MAVLink_waypoint_request_message, [0, 1, 2], 9 ), + MAVLINK_MSG_ID_WAYPOINT_SET_CURRENT : ( '>BBH', MAVLink_waypoint_set_current_message, [0, 1, 2], 106 ), + MAVLINK_MSG_ID_WAYPOINT_CURRENT : ( '>H', MAVLink_waypoint_current_message, [0], 101 ), + MAVLINK_MSG_ID_WAYPOINT_REQUEST_LIST : ( '>BB', MAVLink_waypoint_request_list_message, [0, 1], 213 ), + MAVLINK_MSG_ID_WAYPOINT_COUNT : ( '>BBH', MAVLink_waypoint_count_message, [0, 1, 2], 4 ), + MAVLINK_MSG_ID_WAYPOINT_CLEAR_ALL : ( '>BB', MAVLink_waypoint_clear_all_message, [0, 1], 229 ), + MAVLINK_MSG_ID_WAYPOINT_REACHED : ( '>H', MAVLink_waypoint_reached_message, [0], 21 ), + MAVLINK_MSG_ID_WAYPOINT_ACK : ( '>BBB', MAVLink_waypoint_ack_message, [0, 1, 2], 214 ), + MAVLINK_MSG_ID_GPS_SET_GLOBAL_ORIGIN : ( '>BBiii', MAVLink_gps_set_global_origin_message, [0, 1, 2, 3, 4], 215 ), + MAVLINK_MSG_ID_GPS_LOCAL_ORIGIN_SET : ( '>iii', MAVLink_gps_local_origin_set_message, [0, 1, 2], 14 ), + MAVLINK_MSG_ID_LOCAL_POSITION_SETPOINT_SET : ( '>BBffff', MAVLink_local_position_setpoint_set_message, [0, 1, 2, 3, 4, 5], 206 ), + MAVLINK_MSG_ID_LOCAL_POSITION_SETPOINT : ( '>ffff', MAVLink_local_position_setpoint_message, [0, 1, 2, 3], 50 ), + MAVLINK_MSG_ID_CONTROL_STATUS : ( '>BBBBBBBB', MAVLink_control_status_message, [0, 1, 2, 3, 4, 5, 6, 7], 157 ), + MAVLINK_MSG_ID_SAFETY_SET_ALLOWED_AREA : ( '>BBBffffff', MAVLink_safety_set_allowed_area_message, [0, 1, 2, 3, 4, 5, 6, 7, 8], 126 ), + MAVLINK_MSG_ID_SAFETY_ALLOWED_AREA : ( '>Bffffff', MAVLink_safety_allowed_area_message, [0, 1, 2, 3, 4, 5, 6], 108 ), + MAVLINK_MSG_ID_SET_ROLL_PITCH_YAW_THRUST : ( '>BBffff', MAVLink_set_roll_pitch_yaw_thrust_message, [0, 1, 2, 3, 4, 5], 213 ), + MAVLINK_MSG_ID_SET_ROLL_PITCH_YAW_SPEED_THRUST : ( '>BBffff', MAVLink_set_roll_pitch_yaw_speed_thrust_message, [0, 1, 2, 3, 4, 5], 95 ), + MAVLINK_MSG_ID_ROLL_PITCH_YAW_THRUST_SETPOINT : ( '>Qffff', MAVLink_roll_pitch_yaw_thrust_setpoint_message, [0, 1, 2, 3, 4], 5 ), + MAVLINK_MSG_ID_ROLL_PITCH_YAW_SPEED_THRUST_SETPOINT : ( '>Qffff', MAVLink_roll_pitch_yaw_speed_thrust_setpoint_message, [0, 1, 2, 3, 4], 127 ), + MAVLINK_MSG_ID_NAV_CONTROLLER_OUTPUT : ( '>ffhhHfff', MAVLink_nav_controller_output_message, [0, 1, 2, 3, 4, 5, 6, 7], 57 ), + MAVLINK_MSG_ID_POSITION_TARGET : ( '>ffff', MAVLink_position_target_message, [0, 1, 2, 3], 126 ), + MAVLINK_MSG_ID_STATE_CORRECTION : ( '>fffffffff', MAVLink_state_correction_message, [0, 1, 2, 3, 4, 5, 6, 7, 8], 130 ), + MAVLINK_MSG_ID_SET_ALTITUDE : ( '>BI', MAVLink_set_altitude_message, [0, 1], 119 ), + MAVLINK_MSG_ID_REQUEST_DATA_STREAM : ( '>BBBHB', MAVLink_request_data_stream_message, [0, 1, 2, 3, 4], 193 ), + MAVLINK_MSG_ID_HIL_STATE : ( '>Qffffffiiihhhhhh', MAVLink_hil_state_message, [0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15], 191 ), + MAVLINK_MSG_ID_HIL_CONTROLS : ( '>QffffBB', MAVLink_hil_controls_message, [0, 1, 2, 3, 4, 5, 6], 236 ), + MAVLINK_MSG_ID_MANUAL_CONTROL : ( '>BffffBBBB', MAVLink_manual_control_message, [0, 1, 2, 3, 4, 5, 6, 7, 8], 158 ), + MAVLINK_MSG_ID_RC_CHANNELS_OVERRIDE : ( '>BBHHHHHHHH', MAVLink_rc_channels_override_message, [0, 1, 2, 3, 4, 5, 6, 7, 8, 9], 143 ), + MAVLINK_MSG_ID_GLOBAL_POSITION_INT : ( '>iiihhh', MAVLink_global_position_int_message, [0, 1, 2, 3, 4, 5], 104 ), + MAVLINK_MSG_ID_VFR_HUD : ( '>ffhHff', MAVLink_vfr_hud_message, [0, 1, 2, 3, 4, 5], 123 ), + MAVLINK_MSG_ID_COMMAND : ( '>BBBBffff', MAVLink_command_message, [0, 1, 2, 3, 4, 5, 6, 7], 131 ), + MAVLINK_MSG_ID_COMMAND_ACK : ( '>ff', MAVLink_command_ack_message, [0, 1], 8 ), + MAVLINK_MSG_ID_OPTICAL_FLOW : ( '>QBhhBf', MAVLink_optical_flow_message, [0, 1, 2, 3, 4, 5], 174 ), + MAVLINK_MSG_ID_OBJECT_DETECTION_EVENT : ( '>IHB20sBff', MAVLink_object_detection_event_message, [0, 1, 2, 3, 4, 5, 6], 155 ), + MAVLINK_MSG_ID_DEBUG_VECT : ( '>10sQfff', MAVLink_debug_vect_message, [0, 1, 2, 3, 4], 178 ), + MAVLINK_MSG_ID_NAMED_VALUE_FLOAT : ( '>10sf', MAVLink_named_value_float_message, [0, 1], 224 ), + MAVLINK_MSG_ID_NAMED_VALUE_INT : ( '>10si', MAVLink_named_value_int_message, [0, 1], 60 ), + MAVLINK_MSG_ID_STATUSTEXT : ( '>B50s', MAVLink_statustext_message, [0, 1], 106 ), + MAVLINK_MSG_ID_DEBUG : ( '>Bf', MAVLink_debug_message, [0, 1], 7 ), +} + +class MAVError(Exception): + '''MAVLink error class''' + def __init__(self, msg): + Exception.__init__(self, msg) + self.message = msg + +class MAVString(str): + '''NUL terminated string''' + def __init__(self, s): + str.__init__(self) + def __str__(self): + i = self.find(chr(0)) + if i == -1: + return self[:] + return self[0:i] + +class MAVLink_bad_data(MAVLink_message): + ''' + a piece of bad data in a mavlink stream + ''' + def __init__(self, data, reason): + MAVLink_message.__init__(self, MAVLINK_MSG_ID_BAD_DATA, 'BAD_DATA') + self._fieldnames = ['data', 'reason'] + self.data = data + self.reason = reason + self._msgbuf = data + +class MAVLink(object): + '''MAVLink protocol handling class''' + def __init__(self, file, srcSystem=0, srcComponent=0): + self.seq = 0 + self.file = file + self.srcSystem = srcSystem + self.srcComponent = srcComponent + self.callback = None + self.callback_args = None + self.callback_kwargs = None + self.buf = array.array('B') + self.expected_length = 6 + self.have_prefix_error = False + self.robust_parsing = False + self.protocol_marker = 85 + self.little_endian = False + self.crc_extra = False + self.sort_fields = False + self.total_packets_sent = 0 + self.total_bytes_sent = 0 + self.total_packets_received = 0 + self.total_bytes_received = 0 + self.total_receive_errors = 0 + self.startup_time = time.time() + + def set_callback(self, callback, *args, **kwargs): + self.callback = callback + self.callback_args = args + self.callback_kwargs = kwargs + + def send(self, mavmsg): + '''send a MAVLink message''' + buf = mavmsg.pack(self) + self.file.write(buf) + self.seq = (self.seq + 1) % 255 + self.total_packets_sent += 1 + self.total_bytes_sent += len(buf) + + def bytes_needed(self): + '''return number of bytes needed for next parsing stage''' + ret = self.expected_length - len(self.buf) + if ret <= 0: + return 1 + return ret + + def parse_char(self, c): + '''input some data bytes, possibly returning a new message''' + if isinstance(c, str): + self.buf.fromstring(c) + else: + self.buf.extend(c) + self.total_bytes_received += len(c) + if len(self.buf) >= 1 and self.buf[0] != 85: + magic = self.buf[0] + self.buf = self.buf[1:] + if self.robust_parsing: + m = MAVLink_bad_data(chr(magic), "Bad prefix") + if self.callback: + self.callback(m, *self.callback_args, **self.callback_kwargs) + self.expected_length = 6 + self.total_receive_errors += 1 + return m + if self.have_prefix_error: + return None + self.have_prefix_error = True + self.total_receive_errors += 1 + raise MAVError("invalid MAVLink prefix '%s'" % magic) + self.have_prefix_error = False + if len(self.buf) >= 2: + (magic, self.expected_length) = struct.unpack('BB', self.buf[0:2]) + self.expected_length += 8 + if self.expected_length >= 8 and len(self.buf) >= self.expected_length: + mbuf = self.buf[0:self.expected_length] + self.buf = self.buf[self.expected_length:] + self.expected_length = 6 + if self.robust_parsing: + try: + m = self.decode(mbuf) + self.total_packets_received += 1 + except MAVError as reason: + m = MAVLink_bad_data(mbuf, reason.message) + self.total_receive_errors += 1 + else: + m = self.decode(mbuf) + self.total_packets_received += 1 + if self.callback: + self.callback(m, *self.callback_args, **self.callback_kwargs) + return m + return None + + def parse_buffer(self, s): + '''input some data bytes, possibly returning a list of new messages''' + m = self.parse_char(s) + if m is None: + return None + ret = [m] + while True: + m = self.parse_char("") + if m is None: + return ret + ret.append(m) + return ret + + def decode(self, msgbuf): + '''decode a buffer as a MAVLink message''' + # decode the header + try: + magic, mlen, seq, srcSystem, srcComponent, msgId = struct.unpack('cBBBBB', msgbuf[:6]) + except struct.error as emsg: + raise MAVError('Unable to unpack MAVLink header: %s' % emsg) + if ord(magic) != 85: + raise MAVError("invalid MAVLink prefix '%s'" % magic) + if mlen != len(msgbuf)-8: + raise MAVError('invalid MAVLink message length. Got %u expected %u, msgId=%u' % (len(msgbuf)-8, mlen, msgId)) + + if not msgId in mavlink_map: + raise MAVError('unknown MAVLink message ID %u' % msgId) + + # decode the payload + (fmt, type, order_map, crc_extra) = mavlink_map[msgId] + + # decode the checksum + try: + crc, = struct.unpack(' MAV. + Also used to return a point from MAV -> GCS + + target_system : System ID (uint8_t) + target_component : Component ID (uint8_t) + idx : point index (first point is 1, 0 is for return point) (uint8_t) + count : total number of points (for sanity checking) (uint8_t) + lat : Latitude of point (float) + lng : Longitude of point (float) + + ''' + msg = MAVLink_fence_point_message(target_system, target_component, idx, count, lat, lng) + msg.pack(self) + return msg + + def fence_point_send(self, target_system, target_component, idx, count, lat, lng): + ''' + A fence point. Used to set a point when from GCS -> MAV. + Also used to return a point from MAV -> GCS + + target_system : System ID (uint8_t) + target_component : Component ID (uint8_t) + idx : point index (first point is 1, 0 is for return point) (uint8_t) + count : total number of points (for sanity checking) (uint8_t) + lat : Latitude of point (float) + lng : Longitude of point (float) + + ''' + return self.send(self.fence_point_encode(target_system, target_component, idx, count, lat, lng)) + + def fence_fetch_point_encode(self, target_system, target_component, idx): + ''' + Request a current fence point from MAV + + target_system : System ID (uint8_t) + target_component : Component ID (uint8_t) + idx : point index (first point is 1, 0 is for return point) (uint8_t) + + ''' + msg = MAVLink_fence_fetch_point_message(target_system, target_component, idx) + msg.pack(self) + return msg + + def fence_fetch_point_send(self, target_system, target_component, idx): + ''' + Request a current fence point from MAV + + target_system : System ID (uint8_t) + target_component : Component ID (uint8_t) + idx : point index (first point is 1, 0 is for return point) (uint8_t) + + ''' + return self.send(self.fence_fetch_point_encode(target_system, target_component, idx)) + + def fence_status_encode(self, breach_status, breach_count, breach_type, breach_time): + ''' + Status of geo-fencing. Sent in extended status stream when + fencing enabled + + breach_status : 0 if currently inside fence, 1 if outside (uint8_t) + breach_count : number of fence breaches (uint16_t) + breach_type : last breach type (see FENCE_BREACH_* enum) (uint8_t) + breach_time : time of last breach in milliseconds since boot (uint32_t) + + ''' + msg = MAVLink_fence_status_message(breach_status, breach_count, breach_type, breach_time) + msg.pack(self) + return msg + + def fence_status_send(self, breach_status, breach_count, breach_type, breach_time): + ''' + Status of geo-fencing. Sent in extended status stream when + fencing enabled + + breach_status : 0 if currently inside fence, 1 if outside (uint8_t) + breach_count : number of fence breaches (uint16_t) + breach_type : last breach type (see FENCE_BREACH_* enum) (uint8_t) + breach_time : time of last breach in milliseconds since boot (uint32_t) + + ''' + return self.send(self.fence_status_encode(breach_status, breach_count, breach_type, breach_time)) + + def ahrs_encode(self, omegaIx, omegaIy, omegaIz, accel_weight, renorm_val, error_rp, error_yaw): + ''' + Status of DCM attitude estimator + + omegaIx : X gyro drift estimate rad/s (float) + omegaIy : Y gyro drift estimate rad/s (float) + omegaIz : Z gyro drift estimate rad/s (float) + accel_weight : average accel_weight (float) + renorm_val : average renormalisation value (float) + error_rp : average error_roll_pitch value (float) + error_yaw : average error_yaw value (float) + + ''' + msg = MAVLink_ahrs_message(omegaIx, omegaIy, omegaIz, accel_weight, renorm_val, error_rp, error_yaw) + msg.pack(self) + return msg + + def ahrs_send(self, omegaIx, omegaIy, omegaIz, accel_weight, renorm_val, error_rp, error_yaw): + ''' + Status of DCM attitude estimator + + omegaIx : X gyro drift estimate rad/s (float) + omegaIy : Y gyro drift estimate rad/s (float) + omegaIz : Z gyro drift estimate rad/s (float) + accel_weight : average accel_weight (float) + renorm_val : average renormalisation value (float) + error_rp : average error_roll_pitch value (float) + error_yaw : average error_yaw value (float) + + ''' + return self.send(self.ahrs_encode(omegaIx, omegaIy, omegaIz, accel_weight, renorm_val, error_rp, error_yaw)) + + def simstate_encode(self, roll, pitch, yaw, xacc, yacc, zacc, xgyro, ygyro, zgyro): + ''' + Status of simulation environment, if used + + roll : Roll angle (rad) (float) + pitch : Pitch angle (rad) (float) + yaw : Yaw angle (rad) (float) + xacc : X acceleration m/s/s (float) + yacc : Y acceleration m/s/s (float) + zacc : Z acceleration m/s/s (float) + xgyro : Angular speed around X axis rad/s (float) + ygyro : Angular speed around Y axis rad/s (float) + zgyro : Angular speed around Z axis rad/s (float) + + ''' + msg = MAVLink_simstate_message(roll, pitch, yaw, xacc, yacc, zacc, xgyro, ygyro, zgyro) + msg.pack(self) + return msg + + def simstate_send(self, roll, pitch, yaw, xacc, yacc, zacc, xgyro, ygyro, zgyro): + ''' + Status of simulation environment, if used + + roll : Roll angle (rad) (float) + pitch : Pitch angle (rad) (float) + yaw : Yaw angle (rad) (float) + xacc : X acceleration m/s/s (float) + yacc : Y acceleration m/s/s (float) + zacc : Z acceleration m/s/s (float) + xgyro : Angular speed around X axis rad/s (float) + ygyro : Angular speed around Y axis rad/s (float) + zgyro : Angular speed around Z axis rad/s (float) + + ''' + return self.send(self.simstate_encode(roll, pitch, yaw, xacc, yacc, zacc, xgyro, ygyro, zgyro)) + + def hwstatus_encode(self, Vcc, I2Cerr): + ''' + Status of key hardware + + Vcc : board voltage (mV) (uint16_t) + I2Cerr : I2C error count (uint8_t) + + ''' + msg = MAVLink_hwstatus_message(Vcc, I2Cerr) + msg.pack(self) + return msg + + def hwstatus_send(self, Vcc, I2Cerr): + ''' + Status of key hardware + + Vcc : board voltage (mV) (uint16_t) + I2Cerr : I2C error count (uint8_t) + + ''' + return self.send(self.hwstatus_encode(Vcc, I2Cerr)) + + def radio_encode(self, rssi, remrssi, txbuf, noise, remnoise, rxerrors, fixed): + ''' + Status generated by radio + + rssi : local signal strength (uint8_t) + remrssi : remote signal strength (uint8_t) + txbuf : how full the tx buffer is as a percentage (uint8_t) + noise : background noise level (uint8_t) + remnoise : remote background noise level (uint8_t) + rxerrors : receive errors (uint16_t) + fixed : count of error corrected packets (uint16_t) + + ''' + msg = MAVLink_radio_message(rssi, remrssi, txbuf, noise, remnoise, rxerrors, fixed) + msg.pack(self) + return msg + + def radio_send(self, rssi, remrssi, txbuf, noise, remnoise, rxerrors, fixed): + ''' + Status generated by radio + + rssi : local signal strength (uint8_t) + remrssi : remote signal strength (uint8_t) + txbuf : how full the tx buffer is as a percentage (uint8_t) + noise : background noise level (uint8_t) + remnoise : remote background noise level (uint8_t) + rxerrors : receive errors (uint16_t) + fixed : count of error corrected packets (uint16_t) + + ''' + return self.send(self.radio_encode(rssi, remrssi, txbuf, noise, remnoise, rxerrors, fixed)) + + def heartbeat_encode(self, type, autopilot, mavlink_version=2): + ''' + The heartbeat message shows that a system is present and responding. + The type of the MAV and Autopilot hardware allow the + receiving system to treat further messages from this + system appropriate (e.g. by laying out the user + interface based on the autopilot). + + type : Type of the MAV (quadrotor, helicopter, etc., up to 15 types, defined in MAV_TYPE ENUM) (uint8_t) + autopilot : Type of the Autopilot: 0: Generic, 1: PIXHAWK, 2: SLUGS, 3: Ardupilot (up to 15 types), defined in MAV_AUTOPILOT_TYPE ENUM (uint8_t) + mavlink_version : MAVLink version (uint8_t) + + ''' + msg = MAVLink_heartbeat_message(type, autopilot, mavlink_version) + msg.pack(self) + return msg + + def heartbeat_send(self, type, autopilot, mavlink_version=2): + ''' + The heartbeat message shows that a system is present and responding. + The type of the MAV and Autopilot hardware allow the + receiving system to treat further messages from this + system appropriate (e.g. by laying out the user + interface based on the autopilot). + + type : Type of the MAV (quadrotor, helicopter, etc., up to 15 types, defined in MAV_TYPE ENUM) (uint8_t) + autopilot : Type of the Autopilot: 0: Generic, 1: PIXHAWK, 2: SLUGS, 3: Ardupilot (up to 15 types), defined in MAV_AUTOPILOT_TYPE ENUM (uint8_t) + mavlink_version : MAVLink version (uint8_t) + + ''' + return self.send(self.heartbeat_encode(type, autopilot, mavlink_version)) + + def boot_encode(self, version): + ''' + The boot message indicates that a system is starting. The onboard + software version allows to keep track of onboard + soft/firmware revisions. + + version : The onboard software version (uint32_t) + + ''' + msg = MAVLink_boot_message(version) + msg.pack(self) + return msg + + def boot_send(self, version): + ''' + The boot message indicates that a system is starting. The onboard + software version allows to keep track of onboard + soft/firmware revisions. + + version : The onboard software version (uint32_t) + + ''' + return self.send(self.boot_encode(version)) + + def system_time_encode(self, time_usec): + ''' + The system time is the time of the master clock, typically the + computer clock of the main onboard computer. + + time_usec : Timestamp of the master clock in microseconds since UNIX epoch. (uint64_t) + + ''' + msg = MAVLink_system_time_message(time_usec) + msg.pack(self) + return msg + + def system_time_send(self, time_usec): + ''' + The system time is the time of the master clock, typically the + computer clock of the main onboard computer. + + time_usec : Timestamp of the master clock in microseconds since UNIX epoch. (uint64_t) + + ''' + return self.send(self.system_time_encode(time_usec)) + + def ping_encode(self, seq, target_system, target_component, time): + ''' + A ping message either requesting or responding to a ping. This allows + to measure the system latencies, including serial + port, radio modem and UDP connections. + + seq : PING sequence (uint32_t) + target_system : 0: request ping from all receiving systems, if greater than 0: message is a ping response and number is the system id of the requesting system (uint8_t) + target_component : 0: request ping from all receiving components, if greater than 0: message is a ping response and number is the system id of the requesting system (uint8_t) + time : Unix timestamp in microseconds (uint64_t) + + ''' + msg = MAVLink_ping_message(seq, target_system, target_component, time) + msg.pack(self) + return msg + + def ping_send(self, seq, target_system, target_component, time): + ''' + A ping message either requesting or responding to a ping. This allows + to measure the system latencies, including serial + port, radio modem and UDP connections. + + seq : PING sequence (uint32_t) + target_system : 0: request ping from all receiving systems, if greater than 0: message is a ping response and number is the system id of the requesting system (uint8_t) + target_component : 0: request ping from all receiving components, if greater than 0: message is a ping response and number is the system id of the requesting system (uint8_t) + time : Unix timestamp in microseconds (uint64_t) + + ''' + return self.send(self.ping_encode(seq, target_system, target_component, time)) + + def system_time_utc_encode(self, utc_date, utc_time): + ''' + UTC date and time from GPS module + + utc_date : GPS UTC date ddmmyy (uint32_t) + utc_time : GPS UTC time hhmmss (uint32_t) + + ''' + msg = MAVLink_system_time_utc_message(utc_date, utc_time) + msg.pack(self) + return msg + + def system_time_utc_send(self, utc_date, utc_time): + ''' + UTC date and time from GPS module + + utc_date : GPS UTC date ddmmyy (uint32_t) + utc_time : GPS UTC time hhmmss (uint32_t) + + ''' + return self.send(self.system_time_utc_encode(utc_date, utc_time)) + + def change_operator_control_encode(self, target_system, control_request, version, passkey): + ''' + Request to control this MAV + + target_system : System the GCS requests control for (uint8_t) + control_request : 0: request control of this MAV, 1: Release control of this MAV (uint8_t) + version : 0: key as plaintext, 1-255: future, different hashing/encryption variants. The GCS should in general use the safest mode possible initially and then gradually move down the encryption level if it gets a NACK message indicating an encryption mismatch. (uint8_t) + passkey : Password / Key, depending on version plaintext or encrypted. 25 or less characters, NULL terminated. The characters may involve A-Z, a-z, 0-9, and "!?,.-" (char) + + ''' + msg = MAVLink_change_operator_control_message(target_system, control_request, version, passkey) + msg.pack(self) + return msg + + def change_operator_control_send(self, target_system, control_request, version, passkey): + ''' + Request to control this MAV + + target_system : System the GCS requests control for (uint8_t) + control_request : 0: request control of this MAV, 1: Release control of this MAV (uint8_t) + version : 0: key as plaintext, 1-255: future, different hashing/encryption variants. The GCS should in general use the safest mode possible initially and then gradually move down the encryption level if it gets a NACK message indicating an encryption mismatch. (uint8_t) + passkey : Password / Key, depending on version plaintext or encrypted. 25 or less characters, NULL terminated. The characters may involve A-Z, a-z, 0-9, and "!?,.-" (char) + + ''' + return self.send(self.change_operator_control_encode(target_system, control_request, version, passkey)) + + def change_operator_control_ack_encode(self, gcs_system_id, control_request, ack): + ''' + Accept / deny control of this MAV + + gcs_system_id : ID of the GCS this message (uint8_t) + control_request : 0: request control of this MAV, 1: Release control of this MAV (uint8_t) + ack : 0: ACK, 1: NACK: Wrong passkey, 2: NACK: Unsupported passkey encryption method, 3: NACK: Already under control (uint8_t) + + ''' + msg = MAVLink_change_operator_control_ack_message(gcs_system_id, control_request, ack) + msg.pack(self) + return msg + + def change_operator_control_ack_send(self, gcs_system_id, control_request, ack): + ''' + Accept / deny control of this MAV + + gcs_system_id : ID of the GCS this message (uint8_t) + control_request : 0: request control of this MAV, 1: Release control of this MAV (uint8_t) + ack : 0: ACK, 1: NACK: Wrong passkey, 2: NACK: Unsupported passkey encryption method, 3: NACK: Already under control (uint8_t) + + ''' + return self.send(self.change_operator_control_ack_encode(gcs_system_id, control_request, ack)) + + def auth_key_encode(self, key): + ''' + Emit an encrypted signature / key identifying this system. PLEASE + NOTE: This protocol has been kept simple, so + transmitting the key requires an encrypted channel for + true safety. + + key : key (char) + + ''' + msg = MAVLink_auth_key_message(key) + msg.pack(self) + return msg + + def auth_key_send(self, key): + ''' + Emit an encrypted signature / key identifying this system. PLEASE + NOTE: This protocol has been kept simple, so + transmitting the key requires an encrypted channel for + true safety. + + key : key (char) + + ''' + return self.send(self.auth_key_encode(key)) + + def action_ack_encode(self, action, result): + ''' + This message acknowledges an action. IMPORTANT: The acknowledgement + can be also negative, e.g. the MAV rejects a reset + message because it is in-flight. The action ids are + defined in ENUM MAV_ACTION in + mavlink/include/mavlink_types.h + + action : The action id (uint8_t) + result : 0: Action DENIED, 1: Action executed (uint8_t) + + ''' + msg = MAVLink_action_ack_message(action, result) + msg.pack(self) + return msg + + def action_ack_send(self, action, result): + ''' + This message acknowledges an action. IMPORTANT: The acknowledgement + can be also negative, e.g. the MAV rejects a reset + message because it is in-flight. The action ids are + defined in ENUM MAV_ACTION in + mavlink/include/mavlink_types.h + + action : The action id (uint8_t) + result : 0: Action DENIED, 1: Action executed (uint8_t) + + ''' + return self.send(self.action_ack_encode(action, result)) + + def action_encode(self, target, target_component, action): + ''' + An action message allows to execute a certain onboard action. These + include liftoff, land, storing parameters too EEPROM, + shutddown, etc. The action ids are defined in ENUM + MAV_ACTION in mavlink/include/mavlink_types.h + + target : The system executing the action (uint8_t) + target_component : The component executing the action (uint8_t) + action : The action id (uint8_t) + + ''' + msg = MAVLink_action_message(target, target_component, action) + msg.pack(self) + return msg + + def action_send(self, target, target_component, action): + ''' + An action message allows to execute a certain onboard action. These + include liftoff, land, storing parameters too EEPROM, + shutddown, etc. The action ids are defined in ENUM + MAV_ACTION in mavlink/include/mavlink_types.h + + target : The system executing the action (uint8_t) + target_component : The component executing the action (uint8_t) + action : The action id (uint8_t) + + ''' + return self.send(self.action_encode(target, target_component, action)) + + def set_mode_encode(self, target, mode): + ''' + Set the system mode, as defined by enum MAV_MODE in + mavlink/include/mavlink_types.h. There is no target + component id as the mode is by definition for the + overall aircraft, not only for one component. + + target : The system setting the mode (uint8_t) + mode : The new mode (uint8_t) + + ''' + msg = MAVLink_set_mode_message(target, mode) + msg.pack(self) + return msg + + def set_mode_send(self, target, mode): + ''' + Set the system mode, as defined by enum MAV_MODE in + mavlink/include/mavlink_types.h. There is no target + component id as the mode is by definition for the + overall aircraft, not only for one component. + + target : The system setting the mode (uint8_t) + mode : The new mode (uint8_t) + + ''' + return self.send(self.set_mode_encode(target, mode)) + + def set_nav_mode_encode(self, target, nav_mode): + ''' + Set the system navigation mode, as defined by enum MAV_NAV_MODE in + mavlink/include/mavlink_types.h. The navigation mode + applies to the whole aircraft and thus all components. + + target : The system setting the mode (uint8_t) + nav_mode : The new navigation mode (uint8_t) + + ''' + msg = MAVLink_set_nav_mode_message(target, nav_mode) + msg.pack(self) + return msg + + def set_nav_mode_send(self, target, nav_mode): + ''' + Set the system navigation mode, as defined by enum MAV_NAV_MODE in + mavlink/include/mavlink_types.h. The navigation mode + applies to the whole aircraft and thus all components. + + target : The system setting the mode (uint8_t) + nav_mode : The new navigation mode (uint8_t) + + ''' + return self.send(self.set_nav_mode_encode(target, nav_mode)) + + def param_request_read_encode(self, target_system, target_component, param_id, param_index): + ''' + Request to read the onboard parameter with the param_id string id. + Onboard parameters are stored as key[const char*] -> + value[float]. This allows to send a parameter to any + other component (such as the GCS) without the need of + previous knowledge of possible parameter names. Thus + the same GCS can store different parameters for + different autopilots. See also + http://qgroundcontrol.org/parameter_interface for a + full documentation of QGroundControl and IMU code. + + target_system : System ID (uint8_t) + target_component : Component ID (uint8_t) + param_id : Onboard parameter id (int8_t) + param_index : Parameter index. Send -1 to use the param ID field as identifier (int16_t) + + ''' + msg = MAVLink_param_request_read_message(target_system, target_component, param_id, param_index) + msg.pack(self) + return msg + + def param_request_read_send(self, target_system, target_component, param_id, param_index): + ''' + Request to read the onboard parameter with the param_id string id. + Onboard parameters are stored as key[const char*] -> + value[float]. This allows to send a parameter to any + other component (such as the GCS) without the need of + previous knowledge of possible parameter names. Thus + the same GCS can store different parameters for + different autopilots. See also + http://qgroundcontrol.org/parameter_interface for a + full documentation of QGroundControl and IMU code. + + target_system : System ID (uint8_t) + target_component : Component ID (uint8_t) + param_id : Onboard parameter id (int8_t) + param_index : Parameter index. Send -1 to use the param ID field as identifier (int16_t) + + ''' + return self.send(self.param_request_read_encode(target_system, target_component, param_id, param_index)) + + def param_request_list_encode(self, target_system, target_component): + ''' + Request all parameters of this component. After his request, all + parameters are emitted. + + target_system : System ID (uint8_t) + target_component : Component ID (uint8_t) + + ''' + msg = MAVLink_param_request_list_message(target_system, target_component) + msg.pack(self) + return msg + + def param_request_list_send(self, target_system, target_component): + ''' + Request all parameters of this component. After his request, all + parameters are emitted. + + target_system : System ID (uint8_t) + target_component : Component ID (uint8_t) + + ''' + return self.send(self.param_request_list_encode(target_system, target_component)) + + def param_value_encode(self, param_id, param_value, param_count, param_index): + ''' + Emit the value of a onboard parameter. The inclusion of param_count + and param_index in the message allows the recipient to + keep track of received parameters and allows him to + re-request missing parameters after a loss or timeout. + + param_id : Onboard parameter id (int8_t) + param_value : Onboard parameter value (float) + param_count : Total number of onboard parameters (uint16_t) + param_index : Index of this onboard parameter (uint16_t) + + ''' + msg = MAVLink_param_value_message(param_id, param_value, param_count, param_index) + msg.pack(self) + return msg + + def param_value_send(self, param_id, param_value, param_count, param_index): + ''' + Emit the value of a onboard parameter. The inclusion of param_count + and param_index in the message allows the recipient to + keep track of received parameters and allows him to + re-request missing parameters after a loss or timeout. + + param_id : Onboard parameter id (int8_t) + param_value : Onboard parameter value (float) + param_count : Total number of onboard parameters (uint16_t) + param_index : Index of this onboard parameter (uint16_t) + + ''' + return self.send(self.param_value_encode(param_id, param_value, param_count, param_index)) + + def param_set_encode(self, target_system, target_component, param_id, param_value): + ''' + Set a parameter value TEMPORARILY to RAM. It will be reset to default + on system reboot. Send the ACTION + MAV_ACTION_STORAGE_WRITE to PERMANENTLY write the RAM + contents to EEPROM. IMPORTANT: The receiving component + should acknowledge the new parameter value by sending + a param_value message to all communication partners. + This will also ensure that multiple GCS all have an + up-to-date list of all parameters. If the sending GCS + did not receive a PARAM_VALUE message within its + timeout time, it should re-send the PARAM_SET message. + + target_system : System ID (uint8_t) + target_component : Component ID (uint8_t) + param_id : Onboard parameter id (int8_t) + param_value : Onboard parameter value (float) + + ''' + msg = MAVLink_param_set_message(target_system, target_component, param_id, param_value) + msg.pack(self) + return msg + + def param_set_send(self, target_system, target_component, param_id, param_value): + ''' + Set a parameter value TEMPORARILY to RAM. It will be reset to default + on system reboot. Send the ACTION + MAV_ACTION_STORAGE_WRITE to PERMANENTLY write the RAM + contents to EEPROM. IMPORTANT: The receiving component + should acknowledge the new parameter value by sending + a param_value message to all communication partners. + This will also ensure that multiple GCS all have an + up-to-date list of all parameters. If the sending GCS + did not receive a PARAM_VALUE message within its + timeout time, it should re-send the PARAM_SET message. + + target_system : System ID (uint8_t) + target_component : Component ID (uint8_t) + param_id : Onboard parameter id (int8_t) + param_value : Onboard parameter value (float) + + ''' + return self.send(self.param_set_encode(target_system, target_component, param_id, param_value)) + + def gps_raw_int_encode(self, usec, fix_type, lat, lon, alt, eph, epv, v, hdg): + ''' + The global position, as returned by the Global Positioning System + (GPS). This is NOT the global position estimate of the + sytem, but rather a RAW sensor value. See message + GLOBAL_POSITION for the global position estimate. + Coordinate frame is right-handed, Z-axis up (GPS + frame) + + usec : Timestamp (microseconds since UNIX epoch or microseconds since system boot) (uint64_t) + fix_type : 0-1: no fix, 2: 2D fix, 3: 3D fix. Some applications will not use the value of this field unless it is at least two, so always correctly fill in the fix. (uint8_t) + lat : Latitude in 1E7 degrees (int32_t) + lon : Longitude in 1E7 degrees (int32_t) + alt : Altitude in 1E3 meters (millimeters) (int32_t) + eph : GPS HDOP (float) + epv : GPS VDOP (float) + v : GPS ground speed (m/s) (float) + hdg : Compass heading in degrees, 0..360 degrees (float) + + ''' + msg = MAVLink_gps_raw_int_message(usec, fix_type, lat, lon, alt, eph, epv, v, hdg) + msg.pack(self) + return msg + + def gps_raw_int_send(self, usec, fix_type, lat, lon, alt, eph, epv, v, hdg): + ''' + The global position, as returned by the Global Positioning System + (GPS). This is NOT the global position estimate of the + sytem, but rather a RAW sensor value. See message + GLOBAL_POSITION for the global position estimate. + Coordinate frame is right-handed, Z-axis up (GPS + frame) + + usec : Timestamp (microseconds since UNIX epoch or microseconds since system boot) (uint64_t) + fix_type : 0-1: no fix, 2: 2D fix, 3: 3D fix. Some applications will not use the value of this field unless it is at least two, so always correctly fill in the fix. (uint8_t) + lat : Latitude in 1E7 degrees (int32_t) + lon : Longitude in 1E7 degrees (int32_t) + alt : Altitude in 1E3 meters (millimeters) (int32_t) + eph : GPS HDOP (float) + epv : GPS VDOP (float) + v : GPS ground speed (m/s) (float) + hdg : Compass heading in degrees, 0..360 degrees (float) + + ''' + return self.send(self.gps_raw_int_encode(usec, fix_type, lat, lon, alt, eph, epv, v, hdg)) + + def scaled_imu_encode(self, usec, xacc, yacc, zacc, xgyro, ygyro, zgyro, xmag, ymag, zmag): + ''' + The RAW IMU readings for the usual 9DOF sensor setup. This message + should contain the scaled values to the described + units + + usec : Timestamp (microseconds since UNIX epoch or microseconds since system boot) (uint64_t) + xacc : X acceleration (mg) (int16_t) + yacc : Y acceleration (mg) (int16_t) + zacc : Z acceleration (mg) (int16_t) + xgyro : Angular speed around X axis (millirad /sec) (int16_t) + ygyro : Angular speed around Y axis (millirad /sec) (int16_t) + zgyro : Angular speed around Z axis (millirad /sec) (int16_t) + xmag : X Magnetic field (milli tesla) (int16_t) + ymag : Y Magnetic field (milli tesla) (int16_t) + zmag : Z Magnetic field (milli tesla) (int16_t) + + ''' + msg = MAVLink_scaled_imu_message(usec, xacc, yacc, zacc, xgyro, ygyro, zgyro, xmag, ymag, zmag) + msg.pack(self) + return msg + + def scaled_imu_send(self, usec, xacc, yacc, zacc, xgyro, ygyro, zgyro, xmag, ymag, zmag): + ''' + The RAW IMU readings for the usual 9DOF sensor setup. This message + should contain the scaled values to the described + units + + usec : Timestamp (microseconds since UNIX epoch or microseconds since system boot) (uint64_t) + xacc : X acceleration (mg) (int16_t) + yacc : Y acceleration (mg) (int16_t) + zacc : Z acceleration (mg) (int16_t) + xgyro : Angular speed around X axis (millirad /sec) (int16_t) + ygyro : Angular speed around Y axis (millirad /sec) (int16_t) + zgyro : Angular speed around Z axis (millirad /sec) (int16_t) + xmag : X Magnetic field (milli tesla) (int16_t) + ymag : Y Magnetic field (milli tesla) (int16_t) + zmag : Z Magnetic field (milli tesla) (int16_t) + + ''' + return self.send(self.scaled_imu_encode(usec, xacc, yacc, zacc, xgyro, ygyro, zgyro, xmag, ymag, zmag)) + + def gps_status_encode(self, satellites_visible, satellite_prn, satellite_used, satellite_elevation, satellite_azimuth, satellite_snr): + ''' + The positioning status, as reported by GPS. This message is intended + to display status information about each satellite + visible to the receiver. See message GLOBAL_POSITION + for the global position estimate. This message can + contain information for up to 20 satellites. + + satellites_visible : Number of satellites visible (uint8_t) + satellite_prn : Global satellite ID (int8_t) + satellite_used : 0: Satellite not used, 1: used for localization (int8_t) + satellite_elevation : Elevation (0: right on top of receiver, 90: on the horizon) of satellite (int8_t) + satellite_azimuth : Direction of satellite, 0: 0 deg, 255: 360 deg. (int8_t) + satellite_snr : Signal to noise ratio of satellite (int8_t) + + ''' + msg = MAVLink_gps_status_message(satellites_visible, satellite_prn, satellite_used, satellite_elevation, satellite_azimuth, satellite_snr) + msg.pack(self) + return msg + + def gps_status_send(self, satellites_visible, satellite_prn, satellite_used, satellite_elevation, satellite_azimuth, satellite_snr): + ''' + The positioning status, as reported by GPS. This message is intended + to display status information about each satellite + visible to the receiver. See message GLOBAL_POSITION + for the global position estimate. This message can + contain information for up to 20 satellites. + + satellites_visible : Number of satellites visible (uint8_t) + satellite_prn : Global satellite ID (int8_t) + satellite_used : 0: Satellite not used, 1: used for localization (int8_t) + satellite_elevation : Elevation (0: right on top of receiver, 90: on the horizon) of satellite (int8_t) + satellite_azimuth : Direction of satellite, 0: 0 deg, 255: 360 deg. (int8_t) + satellite_snr : Signal to noise ratio of satellite (int8_t) + + ''' + return self.send(self.gps_status_encode(satellites_visible, satellite_prn, satellite_used, satellite_elevation, satellite_azimuth, satellite_snr)) + + def raw_imu_encode(self, usec, xacc, yacc, zacc, xgyro, ygyro, zgyro, xmag, ymag, zmag): + ''' + The RAW IMU readings for the usual 9DOF sensor setup. This message + should always contain the true raw values without any + scaling to allow data capture and system debugging. + + usec : Timestamp (microseconds since UNIX epoch or microseconds since system boot) (uint64_t) + xacc : X acceleration (raw) (int16_t) + yacc : Y acceleration (raw) (int16_t) + zacc : Z acceleration (raw) (int16_t) + xgyro : Angular speed around X axis (raw) (int16_t) + ygyro : Angular speed around Y axis (raw) (int16_t) + zgyro : Angular speed around Z axis (raw) (int16_t) + xmag : X Magnetic field (raw) (int16_t) + ymag : Y Magnetic field (raw) (int16_t) + zmag : Z Magnetic field (raw) (int16_t) + + ''' + msg = MAVLink_raw_imu_message(usec, xacc, yacc, zacc, xgyro, ygyro, zgyro, xmag, ymag, zmag) + msg.pack(self) + return msg + + def raw_imu_send(self, usec, xacc, yacc, zacc, xgyro, ygyro, zgyro, xmag, ymag, zmag): + ''' + The RAW IMU readings for the usual 9DOF sensor setup. This message + should always contain the true raw values without any + scaling to allow data capture and system debugging. + + usec : Timestamp (microseconds since UNIX epoch or microseconds since system boot) (uint64_t) + xacc : X acceleration (raw) (int16_t) + yacc : Y acceleration (raw) (int16_t) + zacc : Z acceleration (raw) (int16_t) + xgyro : Angular speed around X axis (raw) (int16_t) + ygyro : Angular speed around Y axis (raw) (int16_t) + zgyro : Angular speed around Z axis (raw) (int16_t) + xmag : X Magnetic field (raw) (int16_t) + ymag : Y Magnetic field (raw) (int16_t) + zmag : Z Magnetic field (raw) (int16_t) + + ''' + return self.send(self.raw_imu_encode(usec, xacc, yacc, zacc, xgyro, ygyro, zgyro, xmag, ymag, zmag)) + + def raw_pressure_encode(self, usec, press_abs, press_diff1, press_diff2, temperature): + ''' + The RAW pressure readings for the typical setup of one absolute + pressure and one differential pressure sensor. The + sensor values should be the raw, UNSCALED ADC values. + + usec : Timestamp (microseconds since UNIX epoch or microseconds since system boot) (uint64_t) + press_abs : Absolute pressure (raw) (int16_t) + press_diff1 : Differential pressure 1 (raw) (int16_t) + press_diff2 : Differential pressure 2 (raw) (int16_t) + temperature : Raw Temperature measurement (raw) (int16_t) + + ''' + msg = MAVLink_raw_pressure_message(usec, press_abs, press_diff1, press_diff2, temperature) + msg.pack(self) + return msg + + def raw_pressure_send(self, usec, press_abs, press_diff1, press_diff2, temperature): + ''' + The RAW pressure readings for the typical setup of one absolute + pressure and one differential pressure sensor. The + sensor values should be the raw, UNSCALED ADC values. + + usec : Timestamp (microseconds since UNIX epoch or microseconds since system boot) (uint64_t) + press_abs : Absolute pressure (raw) (int16_t) + press_diff1 : Differential pressure 1 (raw) (int16_t) + press_diff2 : Differential pressure 2 (raw) (int16_t) + temperature : Raw Temperature measurement (raw) (int16_t) + + ''' + return self.send(self.raw_pressure_encode(usec, press_abs, press_diff1, press_diff2, temperature)) + + def scaled_pressure_encode(self, usec, press_abs, press_diff, temperature): + ''' + The pressure readings for the typical setup of one absolute and + differential pressure sensor. The units are as + specified in each field. + + usec : Timestamp (microseconds since UNIX epoch or microseconds since system boot) (uint64_t) + press_abs : Absolute pressure (hectopascal) (float) + press_diff : Differential pressure 1 (hectopascal) (float) + temperature : Temperature measurement (0.01 degrees celsius) (int16_t) + + ''' + msg = MAVLink_scaled_pressure_message(usec, press_abs, press_diff, temperature) + msg.pack(self) + return msg + + def scaled_pressure_send(self, usec, press_abs, press_diff, temperature): + ''' + The pressure readings for the typical setup of one absolute and + differential pressure sensor. The units are as + specified in each field. + + usec : Timestamp (microseconds since UNIX epoch or microseconds since system boot) (uint64_t) + press_abs : Absolute pressure (hectopascal) (float) + press_diff : Differential pressure 1 (hectopascal) (float) + temperature : Temperature measurement (0.01 degrees celsius) (int16_t) + + ''' + return self.send(self.scaled_pressure_encode(usec, press_abs, press_diff, temperature)) + + def attitude_encode(self, usec, roll, pitch, yaw, rollspeed, pitchspeed, yawspeed): + ''' + The attitude in the aeronautical frame (right-handed, Z-down, X-front, + Y-right). + + usec : Timestamp (microseconds since UNIX epoch or microseconds since system boot) (uint64_t) + roll : Roll angle (rad) (float) + pitch : Pitch angle (rad) (float) + yaw : Yaw angle (rad) (float) + rollspeed : Roll angular speed (rad/s) (float) + pitchspeed : Pitch angular speed (rad/s) (float) + yawspeed : Yaw angular speed (rad/s) (float) + + ''' + msg = MAVLink_attitude_message(usec, roll, pitch, yaw, rollspeed, pitchspeed, yawspeed) + msg.pack(self) + return msg + + def attitude_send(self, usec, roll, pitch, yaw, rollspeed, pitchspeed, yawspeed): + ''' + The attitude in the aeronautical frame (right-handed, Z-down, X-front, + Y-right). + + usec : Timestamp (microseconds since UNIX epoch or microseconds since system boot) (uint64_t) + roll : Roll angle (rad) (float) + pitch : Pitch angle (rad) (float) + yaw : Yaw angle (rad) (float) + rollspeed : Roll angular speed (rad/s) (float) + pitchspeed : Pitch angular speed (rad/s) (float) + yawspeed : Yaw angular speed (rad/s) (float) + + ''' + return self.send(self.attitude_encode(usec, roll, pitch, yaw, rollspeed, pitchspeed, yawspeed)) + + def local_position_encode(self, usec, x, y, z, vx, vy, vz): + ''' + The filtered local position (e.g. fused computer vision and + accelerometers). Coordinate frame is right-handed, + Z-axis down (aeronautical frame) + + usec : Timestamp (microseconds since UNIX epoch or microseconds since system boot) (uint64_t) + x : X Position (float) + y : Y Position (float) + z : Z Position (float) + vx : X Speed (float) + vy : Y Speed (float) + vz : Z Speed (float) + + ''' + msg = MAVLink_local_position_message(usec, x, y, z, vx, vy, vz) + msg.pack(self) + return msg + + def local_position_send(self, usec, x, y, z, vx, vy, vz): + ''' + The filtered local position (e.g. fused computer vision and + accelerometers). Coordinate frame is right-handed, + Z-axis down (aeronautical frame) + + usec : Timestamp (microseconds since UNIX epoch or microseconds since system boot) (uint64_t) + x : X Position (float) + y : Y Position (float) + z : Z Position (float) + vx : X Speed (float) + vy : Y Speed (float) + vz : Z Speed (float) + + ''' + return self.send(self.local_position_encode(usec, x, y, z, vx, vy, vz)) + + def global_position_encode(self, usec, lat, lon, alt, vx, vy, vz): + ''' + The filtered global position (e.g. fused GPS and accelerometers). + Coordinate frame is right-handed, Z-axis up (GPS + frame) + + usec : Timestamp (microseconds since unix epoch) (uint64_t) + lat : Latitude, in degrees (float) + lon : Longitude, in degrees (float) + alt : Absolute altitude, in meters (float) + vx : X Speed (in Latitude direction, positive: going north) (float) + vy : Y Speed (in Longitude direction, positive: going east) (float) + vz : Z Speed (in Altitude direction, positive: going up) (float) + + ''' + msg = MAVLink_global_position_message(usec, lat, lon, alt, vx, vy, vz) + msg.pack(self) + return msg + + def global_position_send(self, usec, lat, lon, alt, vx, vy, vz): + ''' + The filtered global position (e.g. fused GPS and accelerometers). + Coordinate frame is right-handed, Z-axis up (GPS + frame) + + usec : Timestamp (microseconds since unix epoch) (uint64_t) + lat : Latitude, in degrees (float) + lon : Longitude, in degrees (float) + alt : Absolute altitude, in meters (float) + vx : X Speed (in Latitude direction, positive: going north) (float) + vy : Y Speed (in Longitude direction, positive: going east) (float) + vz : Z Speed (in Altitude direction, positive: going up) (float) + + ''' + return self.send(self.global_position_encode(usec, lat, lon, alt, vx, vy, vz)) + + def gps_raw_encode(self, usec, fix_type, lat, lon, alt, eph, epv, v, hdg): + ''' + The global position, as returned by the Global Positioning System + (GPS). This is NOT the global position estimate of the + sytem, but rather a RAW sensor value. See message + GLOBAL_POSITION for the global position estimate. + Coordinate frame is right-handed, Z-axis up (GPS + frame) + + usec : Timestamp (microseconds since UNIX epoch or microseconds since system boot) (uint64_t) + fix_type : 0-1: no fix, 2: 2D fix, 3: 3D fix. Some applications will not use the value of this field unless it is at least two, so always correctly fill in the fix. (uint8_t) + lat : Latitude in degrees (float) + lon : Longitude in degrees (float) + alt : Altitude in meters (float) + eph : GPS HDOP (float) + epv : GPS VDOP (float) + v : GPS ground speed (float) + hdg : Compass heading in degrees, 0..360 degrees (float) + + ''' + msg = MAVLink_gps_raw_message(usec, fix_type, lat, lon, alt, eph, epv, v, hdg) + msg.pack(self) + return msg + + def gps_raw_send(self, usec, fix_type, lat, lon, alt, eph, epv, v, hdg): + ''' + The global position, as returned by the Global Positioning System + (GPS). This is NOT the global position estimate of the + sytem, but rather a RAW sensor value. See message + GLOBAL_POSITION for the global position estimate. + Coordinate frame is right-handed, Z-axis up (GPS + frame) + + usec : Timestamp (microseconds since UNIX epoch or microseconds since system boot) (uint64_t) + fix_type : 0-1: no fix, 2: 2D fix, 3: 3D fix. Some applications will not use the value of this field unless it is at least two, so always correctly fill in the fix. (uint8_t) + lat : Latitude in degrees (float) + lon : Longitude in degrees (float) + alt : Altitude in meters (float) + eph : GPS HDOP (float) + epv : GPS VDOP (float) + v : GPS ground speed (float) + hdg : Compass heading in degrees, 0..360 degrees (float) + + ''' + return self.send(self.gps_raw_encode(usec, fix_type, lat, lon, alt, eph, epv, v, hdg)) + + def sys_status_encode(self, mode, nav_mode, status, load, vbat, battery_remaining, packet_drop): + ''' + The general system state. If the system is following the MAVLink + standard, the system state is mainly defined by three + orthogonal states/modes: The system mode, which is + either LOCKED (motors shut down and locked), MANUAL + (system under RC control), GUIDED (system with + autonomous position control, position setpoint + controlled manually) or AUTO (system guided by + path/waypoint planner). The NAV_MODE defined the + current flight state: LIFTOFF (often an open-loop + maneuver), LANDING, WAYPOINTS or VECTOR. This + represents the internal navigation state machine. The + system status shows wether the system is currently + active or not and if an emergency occured. During the + CRITICAL and EMERGENCY states the MAV is still + considered to be active, but should start emergency + procedures autonomously. After a failure occured it + should first move from active to critical to allow + manual intervention and then move to emergency after a + certain timeout. + + mode : System mode, see MAV_MODE ENUM in mavlink/include/mavlink_types.h (uint8_t) + nav_mode : Navigation mode, see MAV_NAV_MODE ENUM (uint8_t) + status : System status flag, see MAV_STATUS ENUM (uint8_t) + load : Maximum usage in percent of the mainloop time, (0%: 0, 100%: 1000) should be always below 1000 (uint16_t) + vbat : Battery voltage, in millivolts (1 = 1 millivolt) (uint16_t) + battery_remaining : Remaining battery energy: (0%: 0, 100%: 1000) (uint16_t) + packet_drop : Dropped packets (packets that were corrupted on reception on the MAV) (uint16_t) + + ''' + msg = MAVLink_sys_status_message(mode, nav_mode, status, load, vbat, battery_remaining, packet_drop) + msg.pack(self) + return msg + + def sys_status_send(self, mode, nav_mode, status, load, vbat, battery_remaining, packet_drop): + ''' + The general system state. If the system is following the MAVLink + standard, the system state is mainly defined by three + orthogonal states/modes: The system mode, which is + either LOCKED (motors shut down and locked), MANUAL + (system under RC control), GUIDED (system with + autonomous position control, position setpoint + controlled manually) or AUTO (system guided by + path/waypoint planner). The NAV_MODE defined the + current flight state: LIFTOFF (often an open-loop + maneuver), LANDING, WAYPOINTS or VECTOR. This + represents the internal navigation state machine. The + system status shows wether the system is currently + active or not and if an emergency occured. During the + CRITICAL and EMERGENCY states the MAV is still + considered to be active, but should start emergency + procedures autonomously. After a failure occured it + should first move from active to critical to allow + manual intervention and then move to emergency after a + certain timeout. + + mode : System mode, see MAV_MODE ENUM in mavlink/include/mavlink_types.h (uint8_t) + nav_mode : Navigation mode, see MAV_NAV_MODE ENUM (uint8_t) + status : System status flag, see MAV_STATUS ENUM (uint8_t) + load : Maximum usage in percent of the mainloop time, (0%: 0, 100%: 1000) should be always below 1000 (uint16_t) + vbat : Battery voltage, in millivolts (1 = 1 millivolt) (uint16_t) + battery_remaining : Remaining battery energy: (0%: 0, 100%: 1000) (uint16_t) + packet_drop : Dropped packets (packets that were corrupted on reception on the MAV) (uint16_t) + + ''' + return self.send(self.sys_status_encode(mode, nav_mode, status, load, vbat, battery_remaining, packet_drop)) + + def rc_channels_raw_encode(self, chan1_raw, chan2_raw, chan3_raw, chan4_raw, chan5_raw, chan6_raw, chan7_raw, chan8_raw, rssi): + ''' + The RAW values of the RC channels received. The standard PPM + modulation is as follows: 1000 microseconds: 0%, 2000 + microseconds: 100%. Individual receivers/transmitters + might violate this specification. + + chan1_raw : RC channel 1 value, in microseconds (uint16_t) + chan2_raw : RC channel 2 value, in microseconds (uint16_t) + chan3_raw : RC channel 3 value, in microseconds (uint16_t) + chan4_raw : RC channel 4 value, in microseconds (uint16_t) + chan5_raw : RC channel 5 value, in microseconds (uint16_t) + chan6_raw : RC channel 6 value, in microseconds (uint16_t) + chan7_raw : RC channel 7 value, in microseconds (uint16_t) + chan8_raw : RC channel 8 value, in microseconds (uint16_t) + rssi : Receive signal strength indicator, 0: 0%, 255: 100% (uint8_t) + + ''' + msg = MAVLink_rc_channels_raw_message(chan1_raw, chan2_raw, chan3_raw, chan4_raw, chan5_raw, chan6_raw, chan7_raw, chan8_raw, rssi) + msg.pack(self) + return msg + + def rc_channels_raw_send(self, chan1_raw, chan2_raw, chan3_raw, chan4_raw, chan5_raw, chan6_raw, chan7_raw, chan8_raw, rssi): + ''' + The RAW values of the RC channels received. The standard PPM + modulation is as follows: 1000 microseconds: 0%, 2000 + microseconds: 100%. Individual receivers/transmitters + might violate this specification. + + chan1_raw : RC channel 1 value, in microseconds (uint16_t) + chan2_raw : RC channel 2 value, in microseconds (uint16_t) + chan3_raw : RC channel 3 value, in microseconds (uint16_t) + chan4_raw : RC channel 4 value, in microseconds (uint16_t) + chan5_raw : RC channel 5 value, in microseconds (uint16_t) + chan6_raw : RC channel 6 value, in microseconds (uint16_t) + chan7_raw : RC channel 7 value, in microseconds (uint16_t) + chan8_raw : RC channel 8 value, in microseconds (uint16_t) + rssi : Receive signal strength indicator, 0: 0%, 255: 100% (uint8_t) + + ''' + return self.send(self.rc_channels_raw_encode(chan1_raw, chan2_raw, chan3_raw, chan4_raw, chan5_raw, chan6_raw, chan7_raw, chan8_raw, rssi)) + + def rc_channels_scaled_encode(self, chan1_scaled, chan2_scaled, chan3_scaled, chan4_scaled, chan5_scaled, chan6_scaled, chan7_scaled, chan8_scaled, rssi): + ''' + The scaled values of the RC channels received. (-100%) -10000, (0%) 0, + (100%) 10000 + + chan1_scaled : RC channel 1 value scaled, (-100%) -10000, (0%) 0, (100%) 10000 (int16_t) + chan2_scaled : RC channel 2 value scaled, (-100%) -10000, (0%) 0, (100%) 10000 (int16_t) + chan3_scaled : RC channel 3 value scaled, (-100%) -10000, (0%) 0, (100%) 10000 (int16_t) + chan4_scaled : RC channel 4 value scaled, (-100%) -10000, (0%) 0, (100%) 10000 (int16_t) + chan5_scaled : RC channel 5 value scaled, (-100%) -10000, (0%) 0, (100%) 10000 (int16_t) + chan6_scaled : RC channel 6 value scaled, (-100%) -10000, (0%) 0, (100%) 10000 (int16_t) + chan7_scaled : RC channel 7 value scaled, (-100%) -10000, (0%) 0, (100%) 10000 (int16_t) + chan8_scaled : RC channel 8 value scaled, (-100%) -10000, (0%) 0, (100%) 10000 (int16_t) + rssi : Receive signal strength indicator, 0: 0%, 255: 100% (uint8_t) + + ''' + msg = MAVLink_rc_channels_scaled_message(chan1_scaled, chan2_scaled, chan3_scaled, chan4_scaled, chan5_scaled, chan6_scaled, chan7_scaled, chan8_scaled, rssi) + msg.pack(self) + return msg + + def rc_channels_scaled_send(self, chan1_scaled, chan2_scaled, chan3_scaled, chan4_scaled, chan5_scaled, chan6_scaled, chan7_scaled, chan8_scaled, rssi): + ''' + The scaled values of the RC channels received. (-100%) -10000, (0%) 0, + (100%) 10000 + + chan1_scaled : RC channel 1 value scaled, (-100%) -10000, (0%) 0, (100%) 10000 (int16_t) + chan2_scaled : RC channel 2 value scaled, (-100%) -10000, (0%) 0, (100%) 10000 (int16_t) + chan3_scaled : RC channel 3 value scaled, (-100%) -10000, (0%) 0, (100%) 10000 (int16_t) + chan4_scaled : RC channel 4 value scaled, (-100%) -10000, (0%) 0, (100%) 10000 (int16_t) + chan5_scaled : RC channel 5 value scaled, (-100%) -10000, (0%) 0, (100%) 10000 (int16_t) + chan6_scaled : RC channel 6 value scaled, (-100%) -10000, (0%) 0, (100%) 10000 (int16_t) + chan7_scaled : RC channel 7 value scaled, (-100%) -10000, (0%) 0, (100%) 10000 (int16_t) + chan8_scaled : RC channel 8 value scaled, (-100%) -10000, (0%) 0, (100%) 10000 (int16_t) + rssi : Receive signal strength indicator, 0: 0%, 255: 100% (uint8_t) + + ''' + return self.send(self.rc_channels_scaled_encode(chan1_scaled, chan2_scaled, chan3_scaled, chan4_scaled, chan5_scaled, chan6_scaled, chan7_scaled, chan8_scaled, rssi)) + + def servo_output_raw_encode(self, servo1_raw, servo2_raw, servo3_raw, servo4_raw, servo5_raw, servo6_raw, servo7_raw, servo8_raw): + ''' + The RAW values of the servo outputs (for RC input from the remote, use + the RC_CHANNELS messages). The standard PPM modulation + is as follows: 1000 microseconds: 0%, 2000 + microseconds: 100%. + + servo1_raw : Servo output 1 value, in microseconds (uint16_t) + servo2_raw : Servo output 2 value, in microseconds (uint16_t) + servo3_raw : Servo output 3 value, in microseconds (uint16_t) + servo4_raw : Servo output 4 value, in microseconds (uint16_t) + servo5_raw : Servo output 5 value, in microseconds (uint16_t) + servo6_raw : Servo output 6 value, in microseconds (uint16_t) + servo7_raw : Servo output 7 value, in microseconds (uint16_t) + servo8_raw : Servo output 8 value, in microseconds (uint16_t) + + ''' + msg = MAVLink_servo_output_raw_message(servo1_raw, servo2_raw, servo3_raw, servo4_raw, servo5_raw, servo6_raw, servo7_raw, servo8_raw) + msg.pack(self) + return msg + + def servo_output_raw_send(self, servo1_raw, servo2_raw, servo3_raw, servo4_raw, servo5_raw, servo6_raw, servo7_raw, servo8_raw): + ''' + The RAW values of the servo outputs (for RC input from the remote, use + the RC_CHANNELS messages). The standard PPM modulation + is as follows: 1000 microseconds: 0%, 2000 + microseconds: 100%. + + servo1_raw : Servo output 1 value, in microseconds (uint16_t) + servo2_raw : Servo output 2 value, in microseconds (uint16_t) + servo3_raw : Servo output 3 value, in microseconds (uint16_t) + servo4_raw : Servo output 4 value, in microseconds (uint16_t) + servo5_raw : Servo output 5 value, in microseconds (uint16_t) + servo6_raw : Servo output 6 value, in microseconds (uint16_t) + servo7_raw : Servo output 7 value, in microseconds (uint16_t) + servo8_raw : Servo output 8 value, in microseconds (uint16_t) + + ''' + return self.send(self.servo_output_raw_encode(servo1_raw, servo2_raw, servo3_raw, servo4_raw, servo5_raw, servo6_raw, servo7_raw, servo8_raw)) + + def waypoint_encode(self, target_system, target_component, seq, frame, command, current, autocontinue, param1, param2, param3, param4, x, y, z): + ''' + Message encoding a waypoint. This message is emitted to announce + the presence of a waypoint and to set a waypoint on + the system. The waypoint can be either in x, y, z + meters (type: LOCAL) or x:lat, y:lon, z:altitude. + Local frame is Z-down, right handed, global frame is + Z-up, right handed + + target_system : System ID (uint8_t) + target_component : Component ID (uint8_t) + seq : Sequence (uint16_t) + frame : The coordinate system of the waypoint. see MAV_FRAME in mavlink_types.h (uint8_t) + command : The scheduled action for the waypoint. see MAV_COMMAND in common.xml MAVLink specs (uint8_t) + current : false:0, true:1 (uint8_t) + autocontinue : autocontinue to next wp (uint8_t) + param1 : PARAM1 / For NAV command waypoints: Radius in which the waypoint is accepted as reached, in meters (float) + param2 : PARAM2 / For NAV command waypoints: Time that the MAV should stay inside the PARAM1 radius before advancing, in milliseconds (float) + param3 : PARAM3 / For LOITER command waypoints: Orbit to circle around the waypoint, in meters. If positive the orbit direction should be clockwise, if negative the orbit direction should be counter-clockwise. (float) + param4 : PARAM4 / For NAV and LOITER command waypoints: Yaw orientation in degrees, [0..360] 0 = NORTH (float) + x : PARAM5 / local: x position, global: latitude (float) + y : PARAM6 / y position: global: longitude (float) + z : PARAM7 / z position: global: altitude (float) + + ''' + msg = MAVLink_waypoint_message(target_system, target_component, seq, frame, command, current, autocontinue, param1, param2, param3, param4, x, y, z) + msg.pack(self) + return msg + + def waypoint_send(self, target_system, target_component, seq, frame, command, current, autocontinue, param1, param2, param3, param4, x, y, z): + ''' + Message encoding a waypoint. This message is emitted to announce + the presence of a waypoint and to set a waypoint on + the system. The waypoint can be either in x, y, z + meters (type: LOCAL) or x:lat, y:lon, z:altitude. + Local frame is Z-down, right handed, global frame is + Z-up, right handed + + target_system : System ID (uint8_t) + target_component : Component ID (uint8_t) + seq : Sequence (uint16_t) + frame : The coordinate system of the waypoint. see MAV_FRAME in mavlink_types.h (uint8_t) + command : The scheduled action for the waypoint. see MAV_COMMAND in common.xml MAVLink specs (uint8_t) + current : false:0, true:1 (uint8_t) + autocontinue : autocontinue to next wp (uint8_t) + param1 : PARAM1 / For NAV command waypoints: Radius in which the waypoint is accepted as reached, in meters (float) + param2 : PARAM2 / For NAV command waypoints: Time that the MAV should stay inside the PARAM1 radius before advancing, in milliseconds (float) + param3 : PARAM3 / For LOITER command waypoints: Orbit to circle around the waypoint, in meters. If positive the orbit direction should be clockwise, if negative the orbit direction should be counter-clockwise. (float) + param4 : PARAM4 / For NAV and LOITER command waypoints: Yaw orientation in degrees, [0..360] 0 = NORTH (float) + x : PARAM5 / local: x position, global: latitude (float) + y : PARAM6 / y position: global: longitude (float) + z : PARAM7 / z position: global: altitude (float) + + ''' + return self.send(self.waypoint_encode(target_system, target_component, seq, frame, command, current, autocontinue, param1, param2, param3, param4, x, y, z)) + + def waypoint_request_encode(self, target_system, target_component, seq): + ''' + Request the information of the waypoint with the sequence number seq. + The response of the system to this message should be a + WAYPOINT message. + + target_system : System ID (uint8_t) + target_component : Component ID (uint8_t) + seq : Sequence (uint16_t) + + ''' + msg = MAVLink_waypoint_request_message(target_system, target_component, seq) + msg.pack(self) + return msg + + def waypoint_request_send(self, target_system, target_component, seq): + ''' + Request the information of the waypoint with the sequence number seq. + The response of the system to this message should be a + WAYPOINT message. + + target_system : System ID (uint8_t) + target_component : Component ID (uint8_t) + seq : Sequence (uint16_t) + + ''' + return self.send(self.waypoint_request_encode(target_system, target_component, seq)) + + def waypoint_set_current_encode(self, target_system, target_component, seq): + ''' + Set the waypoint with sequence number seq as current waypoint. This + means that the MAV will continue to this waypoint on + the shortest path (not following the waypoints in- + between). + + target_system : System ID (uint8_t) + target_component : Component ID (uint8_t) + seq : Sequence (uint16_t) + + ''' + msg = MAVLink_waypoint_set_current_message(target_system, target_component, seq) + msg.pack(self) + return msg + + def waypoint_set_current_send(self, target_system, target_component, seq): + ''' + Set the waypoint with sequence number seq as current waypoint. This + means that the MAV will continue to this waypoint on + the shortest path (not following the waypoints in- + between). + + target_system : System ID (uint8_t) + target_component : Component ID (uint8_t) + seq : Sequence (uint16_t) + + ''' + return self.send(self.waypoint_set_current_encode(target_system, target_component, seq)) + + def waypoint_current_encode(self, seq): + ''' + Message that announces the sequence number of the current active + waypoint. The MAV will fly towards this waypoint. + + seq : Sequence (uint16_t) + + ''' + msg = MAVLink_waypoint_current_message(seq) + msg.pack(self) + return msg + + def waypoint_current_send(self, seq): + ''' + Message that announces the sequence number of the current active + waypoint. The MAV will fly towards this waypoint. + + seq : Sequence (uint16_t) + + ''' + return self.send(self.waypoint_current_encode(seq)) + + def waypoint_request_list_encode(self, target_system, target_component): + ''' + Request the overall list of waypoints from the system/component. + + target_system : System ID (uint8_t) + target_component : Component ID (uint8_t) + + ''' + msg = MAVLink_waypoint_request_list_message(target_system, target_component) + msg.pack(self) + return msg + + def waypoint_request_list_send(self, target_system, target_component): + ''' + Request the overall list of waypoints from the system/component. + + target_system : System ID (uint8_t) + target_component : Component ID (uint8_t) + + ''' + return self.send(self.waypoint_request_list_encode(target_system, target_component)) + + def waypoint_count_encode(self, target_system, target_component, count): + ''' + This message is emitted as response to WAYPOINT_REQUEST_LIST by the + MAV. The GCS can then request the individual waypoints + based on the knowledge of the total number of + waypoints. + + target_system : System ID (uint8_t) + target_component : Component ID (uint8_t) + count : Number of Waypoints in the Sequence (uint16_t) + + ''' + msg = MAVLink_waypoint_count_message(target_system, target_component, count) + msg.pack(self) + return msg + + def waypoint_count_send(self, target_system, target_component, count): + ''' + This message is emitted as response to WAYPOINT_REQUEST_LIST by the + MAV. The GCS can then request the individual waypoints + based on the knowledge of the total number of + waypoints. + + target_system : System ID (uint8_t) + target_component : Component ID (uint8_t) + count : Number of Waypoints in the Sequence (uint16_t) + + ''' + return self.send(self.waypoint_count_encode(target_system, target_component, count)) + + def waypoint_clear_all_encode(self, target_system, target_component): + ''' + Delete all waypoints at once. + + target_system : System ID (uint8_t) + target_component : Component ID (uint8_t) + + ''' + msg = MAVLink_waypoint_clear_all_message(target_system, target_component) + msg.pack(self) + return msg + + def waypoint_clear_all_send(self, target_system, target_component): + ''' + Delete all waypoints at once. + + target_system : System ID (uint8_t) + target_component : Component ID (uint8_t) + + ''' + return self.send(self.waypoint_clear_all_encode(target_system, target_component)) + + def waypoint_reached_encode(self, seq): + ''' + A certain waypoint has been reached. The system will either hold this + position (or circle on the orbit) or (if the + autocontinue on the WP was set) continue to the next + waypoint. + + seq : Sequence (uint16_t) + + ''' + msg = MAVLink_waypoint_reached_message(seq) + msg.pack(self) + return msg + + def waypoint_reached_send(self, seq): + ''' + A certain waypoint has been reached. The system will either hold this + position (or circle on the orbit) or (if the + autocontinue on the WP was set) continue to the next + waypoint. + + seq : Sequence (uint16_t) + + ''' + return self.send(self.waypoint_reached_encode(seq)) + + def waypoint_ack_encode(self, target_system, target_component, type): + ''' + Ack message during waypoint handling. The type field states if this + message is a positive ack (type=0) or if an error + happened (type=non-zero). + + target_system : System ID (uint8_t) + target_component : Component ID (uint8_t) + type : 0: OK, 1: Error (uint8_t) + + ''' + msg = MAVLink_waypoint_ack_message(target_system, target_component, type) + msg.pack(self) + return msg + + def waypoint_ack_send(self, target_system, target_component, type): + ''' + Ack message during waypoint handling. The type field states if this + message is a positive ack (type=0) or if an error + happened (type=non-zero). + + target_system : System ID (uint8_t) + target_component : Component ID (uint8_t) + type : 0: OK, 1: Error (uint8_t) + + ''' + return self.send(self.waypoint_ack_encode(target_system, target_component, type)) + + def gps_set_global_origin_encode(self, target_system, target_component, latitude, longitude, altitude): + ''' + As local waypoints exist, the global waypoint reference allows to + transform between the local coordinate frame and the + global (GPS) coordinate frame. This can be necessary + when e.g. in- and outdoor settings are connected and + the MAV should move from in- to outdoor. + + target_system : System ID (uint8_t) + target_component : Component ID (uint8_t) + latitude : global position * 1E7 (int32_t) + longitude : global position * 1E7 (int32_t) + altitude : global position * 1000 (int32_t) + + ''' + msg = MAVLink_gps_set_global_origin_message(target_system, target_component, latitude, longitude, altitude) + msg.pack(self) + return msg + + def gps_set_global_origin_send(self, target_system, target_component, latitude, longitude, altitude): + ''' + As local waypoints exist, the global waypoint reference allows to + transform between the local coordinate frame and the + global (GPS) coordinate frame. This can be necessary + when e.g. in- and outdoor settings are connected and + the MAV should move from in- to outdoor. + + target_system : System ID (uint8_t) + target_component : Component ID (uint8_t) + latitude : global position * 1E7 (int32_t) + longitude : global position * 1E7 (int32_t) + altitude : global position * 1000 (int32_t) + + ''' + return self.send(self.gps_set_global_origin_encode(target_system, target_component, latitude, longitude, altitude)) + + def gps_local_origin_set_encode(self, latitude, longitude, altitude): + ''' + Once the MAV sets a new GPS-Local correspondence, this message + announces the origin (0,0,0) position + + latitude : Latitude (WGS84), expressed as * 1E7 (int32_t) + longitude : Longitude (WGS84), expressed as * 1E7 (int32_t) + altitude : Altitude(WGS84), expressed as * 1000 (int32_t) + + ''' + msg = MAVLink_gps_local_origin_set_message(latitude, longitude, altitude) + msg.pack(self) + return msg + + def gps_local_origin_set_send(self, latitude, longitude, altitude): + ''' + Once the MAV sets a new GPS-Local correspondence, this message + announces the origin (0,0,0) position + + latitude : Latitude (WGS84), expressed as * 1E7 (int32_t) + longitude : Longitude (WGS84), expressed as * 1E7 (int32_t) + altitude : Altitude(WGS84), expressed as * 1000 (int32_t) + + ''' + return self.send(self.gps_local_origin_set_encode(latitude, longitude, altitude)) + + def local_position_setpoint_set_encode(self, target_system, target_component, x, y, z, yaw): + ''' + Set the setpoint for a local position controller. This is the position + in local coordinates the MAV should fly to. This + message is sent by the path/waypoint planner to the + onboard position controller. As some MAVs have a + degree of freedom in yaw (e.g. all + helicopters/quadrotors), the desired yaw angle is part + of the message. + + target_system : System ID (uint8_t) + target_component : Component ID (uint8_t) + x : x position (float) + y : y position (float) + z : z position (float) + yaw : Desired yaw angle (float) + + ''' + msg = MAVLink_local_position_setpoint_set_message(target_system, target_component, x, y, z, yaw) + msg.pack(self) + return msg + + def local_position_setpoint_set_send(self, target_system, target_component, x, y, z, yaw): + ''' + Set the setpoint for a local position controller. This is the position + in local coordinates the MAV should fly to. This + message is sent by the path/waypoint planner to the + onboard position controller. As some MAVs have a + degree of freedom in yaw (e.g. all + helicopters/quadrotors), the desired yaw angle is part + of the message. + + target_system : System ID (uint8_t) + target_component : Component ID (uint8_t) + x : x position (float) + y : y position (float) + z : z position (float) + yaw : Desired yaw angle (float) + + ''' + return self.send(self.local_position_setpoint_set_encode(target_system, target_component, x, y, z, yaw)) + + def local_position_setpoint_encode(self, x, y, z, yaw): + ''' + Transmit the current local setpoint of the controller to other MAVs + (collision avoidance) and to the GCS. + + x : x position (float) + y : y position (float) + z : z position (float) + yaw : Desired yaw angle (float) + + ''' + msg = MAVLink_local_position_setpoint_message(x, y, z, yaw) + msg.pack(self) + return msg + + def local_position_setpoint_send(self, x, y, z, yaw): + ''' + Transmit the current local setpoint of the controller to other MAVs + (collision avoidance) and to the GCS. + + x : x position (float) + y : y position (float) + z : z position (float) + yaw : Desired yaw angle (float) + + ''' + return self.send(self.local_position_setpoint_encode(x, y, z, yaw)) + + def control_status_encode(self, position_fix, vision_fix, gps_fix, ahrs_health, control_att, control_pos_xy, control_pos_z, control_pos_yaw): + ''' + + + position_fix : Position fix: 0: lost, 2: 2D position fix, 3: 3D position fix (uint8_t) + vision_fix : Vision position fix: 0: lost, 1: 2D local position hold, 2: 2D global position fix, 3: 3D global position fix (uint8_t) + gps_fix : GPS position fix: 0: no reception, 1: Minimum 1 satellite, but no position fix, 2: 2D position fix, 3: 3D position fix (uint8_t) + ahrs_health : Attitude estimation health: 0: poor, 255: excellent (uint8_t) + control_att : 0: Attitude control disabled, 1: enabled (uint8_t) + control_pos_xy : 0: X, Y position control disabled, 1: enabled (uint8_t) + control_pos_z : 0: Z position control disabled, 1: enabled (uint8_t) + control_pos_yaw : 0: Yaw angle control disabled, 1: enabled (uint8_t) + + ''' + msg = MAVLink_control_status_message(position_fix, vision_fix, gps_fix, ahrs_health, control_att, control_pos_xy, control_pos_z, control_pos_yaw) + msg.pack(self) + return msg + + def control_status_send(self, position_fix, vision_fix, gps_fix, ahrs_health, control_att, control_pos_xy, control_pos_z, control_pos_yaw): + ''' + + + position_fix : Position fix: 0: lost, 2: 2D position fix, 3: 3D position fix (uint8_t) + vision_fix : Vision position fix: 0: lost, 1: 2D local position hold, 2: 2D global position fix, 3: 3D global position fix (uint8_t) + gps_fix : GPS position fix: 0: no reception, 1: Minimum 1 satellite, but no position fix, 2: 2D position fix, 3: 3D position fix (uint8_t) + ahrs_health : Attitude estimation health: 0: poor, 255: excellent (uint8_t) + control_att : 0: Attitude control disabled, 1: enabled (uint8_t) + control_pos_xy : 0: X, Y position control disabled, 1: enabled (uint8_t) + control_pos_z : 0: Z position control disabled, 1: enabled (uint8_t) + control_pos_yaw : 0: Yaw angle control disabled, 1: enabled (uint8_t) + + ''' + return self.send(self.control_status_encode(position_fix, vision_fix, gps_fix, ahrs_health, control_att, control_pos_xy, control_pos_z, control_pos_yaw)) + + def safety_set_allowed_area_encode(self, target_system, target_component, frame, p1x, p1y, p1z, p2x, p2y, p2z): + ''' + Set a safety zone (volume), which is defined by two corners of a cube. + This message can be used to tell the MAV which + setpoints/waypoints to accept and which to reject. + Safety areas are often enforced by national or + competition regulations. + + target_system : System ID (uint8_t) + target_component : Component ID (uint8_t) + frame : Coordinate frame, as defined by MAV_FRAME enum in mavlink_types.h. Can be either global, GPS, right-handed with Z axis up or local, right handed, Z axis down. (uint8_t) + p1x : x position 1 / Latitude 1 (float) + p1y : y position 1 / Longitude 1 (float) + p1z : z position 1 / Altitude 1 (float) + p2x : x position 2 / Latitude 2 (float) + p2y : y position 2 / Longitude 2 (float) + p2z : z position 2 / Altitude 2 (float) + + ''' + msg = MAVLink_safety_set_allowed_area_message(target_system, target_component, frame, p1x, p1y, p1z, p2x, p2y, p2z) + msg.pack(self) + return msg + + def safety_set_allowed_area_send(self, target_system, target_component, frame, p1x, p1y, p1z, p2x, p2y, p2z): + ''' + Set a safety zone (volume), which is defined by two corners of a cube. + This message can be used to tell the MAV which + setpoints/waypoints to accept and which to reject. + Safety areas are often enforced by national or + competition regulations. + + target_system : System ID (uint8_t) + target_component : Component ID (uint8_t) + frame : Coordinate frame, as defined by MAV_FRAME enum in mavlink_types.h. Can be either global, GPS, right-handed with Z axis up or local, right handed, Z axis down. (uint8_t) + p1x : x position 1 / Latitude 1 (float) + p1y : y position 1 / Longitude 1 (float) + p1z : z position 1 / Altitude 1 (float) + p2x : x position 2 / Latitude 2 (float) + p2y : y position 2 / Longitude 2 (float) + p2z : z position 2 / Altitude 2 (float) + + ''' + return self.send(self.safety_set_allowed_area_encode(target_system, target_component, frame, p1x, p1y, p1z, p2x, p2y, p2z)) + + def safety_allowed_area_encode(self, frame, p1x, p1y, p1z, p2x, p2y, p2z): + ''' + Read out the safety zone the MAV currently assumes. + + frame : Coordinate frame, as defined by MAV_FRAME enum in mavlink_types.h. Can be either global, GPS, right-handed with Z axis up or local, right handed, Z axis down. (uint8_t) + p1x : x position 1 / Latitude 1 (float) + p1y : y position 1 / Longitude 1 (float) + p1z : z position 1 / Altitude 1 (float) + p2x : x position 2 / Latitude 2 (float) + p2y : y position 2 / Longitude 2 (float) + p2z : z position 2 / Altitude 2 (float) + + ''' + msg = MAVLink_safety_allowed_area_message(frame, p1x, p1y, p1z, p2x, p2y, p2z) + msg.pack(self) + return msg + + def safety_allowed_area_send(self, frame, p1x, p1y, p1z, p2x, p2y, p2z): + ''' + Read out the safety zone the MAV currently assumes. + + frame : Coordinate frame, as defined by MAV_FRAME enum in mavlink_types.h. Can be either global, GPS, right-handed with Z axis up or local, right handed, Z axis down. (uint8_t) + p1x : x position 1 / Latitude 1 (float) + p1y : y position 1 / Longitude 1 (float) + p1z : z position 1 / Altitude 1 (float) + p2x : x position 2 / Latitude 2 (float) + p2y : y position 2 / Longitude 2 (float) + p2z : z position 2 / Altitude 2 (float) + + ''' + return self.send(self.safety_allowed_area_encode(frame, p1x, p1y, p1z, p2x, p2y, p2z)) + + def set_roll_pitch_yaw_thrust_encode(self, target_system, target_component, roll, pitch, yaw, thrust): + ''' + Set roll, pitch and yaw. + + target_system : System ID (uint8_t) + target_component : Component ID (uint8_t) + roll : Desired roll angle in radians (float) + pitch : Desired pitch angle in radians (float) + yaw : Desired yaw angle in radians (float) + thrust : Collective thrust, normalized to 0 .. 1 (float) + + ''' + msg = MAVLink_set_roll_pitch_yaw_thrust_message(target_system, target_component, roll, pitch, yaw, thrust) + msg.pack(self) + return msg + + def set_roll_pitch_yaw_thrust_send(self, target_system, target_component, roll, pitch, yaw, thrust): + ''' + Set roll, pitch and yaw. + + target_system : System ID (uint8_t) + target_component : Component ID (uint8_t) + roll : Desired roll angle in radians (float) + pitch : Desired pitch angle in radians (float) + yaw : Desired yaw angle in radians (float) + thrust : Collective thrust, normalized to 0 .. 1 (float) + + ''' + return self.send(self.set_roll_pitch_yaw_thrust_encode(target_system, target_component, roll, pitch, yaw, thrust)) + + def set_roll_pitch_yaw_speed_thrust_encode(self, target_system, target_component, roll_speed, pitch_speed, yaw_speed, thrust): + ''' + Set roll, pitch and yaw. + + target_system : System ID (uint8_t) + target_component : Component ID (uint8_t) + roll_speed : Desired roll angular speed in rad/s (float) + pitch_speed : Desired pitch angular speed in rad/s (float) + yaw_speed : Desired yaw angular speed in rad/s (float) + thrust : Collective thrust, normalized to 0 .. 1 (float) + + ''' + msg = MAVLink_set_roll_pitch_yaw_speed_thrust_message(target_system, target_component, roll_speed, pitch_speed, yaw_speed, thrust) + msg.pack(self) + return msg + + def set_roll_pitch_yaw_speed_thrust_send(self, target_system, target_component, roll_speed, pitch_speed, yaw_speed, thrust): + ''' + Set roll, pitch and yaw. + + target_system : System ID (uint8_t) + target_component : Component ID (uint8_t) + roll_speed : Desired roll angular speed in rad/s (float) + pitch_speed : Desired pitch angular speed in rad/s (float) + yaw_speed : Desired yaw angular speed in rad/s (float) + thrust : Collective thrust, normalized to 0 .. 1 (float) + + ''' + return self.send(self.set_roll_pitch_yaw_speed_thrust_encode(target_system, target_component, roll_speed, pitch_speed, yaw_speed, thrust)) + + def roll_pitch_yaw_thrust_setpoint_encode(self, time_us, roll, pitch, yaw, thrust): + ''' + Setpoint in roll, pitch, yaw currently active on the system. + + time_us : Timestamp in micro seconds since unix epoch (uint64_t) + roll : Desired roll angle in radians (float) + pitch : Desired pitch angle in radians (float) + yaw : Desired yaw angle in radians (float) + thrust : Collective thrust, normalized to 0 .. 1 (float) + + ''' + msg = MAVLink_roll_pitch_yaw_thrust_setpoint_message(time_us, roll, pitch, yaw, thrust) + msg.pack(self) + return msg + + def roll_pitch_yaw_thrust_setpoint_send(self, time_us, roll, pitch, yaw, thrust): + ''' + Setpoint in roll, pitch, yaw currently active on the system. + + time_us : Timestamp in micro seconds since unix epoch (uint64_t) + roll : Desired roll angle in radians (float) + pitch : Desired pitch angle in radians (float) + yaw : Desired yaw angle in radians (float) + thrust : Collective thrust, normalized to 0 .. 1 (float) + + ''' + return self.send(self.roll_pitch_yaw_thrust_setpoint_encode(time_us, roll, pitch, yaw, thrust)) + + def roll_pitch_yaw_speed_thrust_setpoint_encode(self, time_us, roll_speed, pitch_speed, yaw_speed, thrust): + ''' + Setpoint in rollspeed, pitchspeed, yawspeed currently active on the + system. + + time_us : Timestamp in micro seconds since unix epoch (uint64_t) + roll_speed : Desired roll angular speed in rad/s (float) + pitch_speed : Desired pitch angular speed in rad/s (float) + yaw_speed : Desired yaw angular speed in rad/s (float) + thrust : Collective thrust, normalized to 0 .. 1 (float) + + ''' + msg = MAVLink_roll_pitch_yaw_speed_thrust_setpoint_message(time_us, roll_speed, pitch_speed, yaw_speed, thrust) + msg.pack(self) + return msg + + def roll_pitch_yaw_speed_thrust_setpoint_send(self, time_us, roll_speed, pitch_speed, yaw_speed, thrust): + ''' + Setpoint in rollspeed, pitchspeed, yawspeed currently active on the + system. + + time_us : Timestamp in micro seconds since unix epoch (uint64_t) + roll_speed : Desired roll angular speed in rad/s (float) + pitch_speed : Desired pitch angular speed in rad/s (float) + yaw_speed : Desired yaw angular speed in rad/s (float) + thrust : Collective thrust, normalized to 0 .. 1 (float) + + ''' + return self.send(self.roll_pitch_yaw_speed_thrust_setpoint_encode(time_us, roll_speed, pitch_speed, yaw_speed, thrust)) + + def nav_controller_output_encode(self, nav_roll, nav_pitch, nav_bearing, target_bearing, wp_dist, alt_error, aspd_error, xtrack_error): + ''' + Outputs of the APM navigation controller. The primary use of this + message is to check the response and signs of the + controller before actual flight and to assist with + tuning controller parameters + + nav_roll : Current desired roll in degrees (float) + nav_pitch : Current desired pitch in degrees (float) + nav_bearing : Current desired heading in degrees (int16_t) + target_bearing : Bearing to current waypoint/target in degrees (int16_t) + wp_dist : Distance to active waypoint in meters (uint16_t) + alt_error : Current altitude error in meters (float) + aspd_error : Current airspeed error in meters/second (float) + xtrack_error : Current crosstrack error on x-y plane in meters (float) + + ''' + msg = MAVLink_nav_controller_output_message(nav_roll, nav_pitch, nav_bearing, target_bearing, wp_dist, alt_error, aspd_error, xtrack_error) + msg.pack(self) + return msg + + def nav_controller_output_send(self, nav_roll, nav_pitch, nav_bearing, target_bearing, wp_dist, alt_error, aspd_error, xtrack_error): + ''' + Outputs of the APM navigation controller. The primary use of this + message is to check the response and signs of the + controller before actual flight and to assist with + tuning controller parameters + + nav_roll : Current desired roll in degrees (float) + nav_pitch : Current desired pitch in degrees (float) + nav_bearing : Current desired heading in degrees (int16_t) + target_bearing : Bearing to current waypoint/target in degrees (int16_t) + wp_dist : Distance to active waypoint in meters (uint16_t) + alt_error : Current altitude error in meters (float) + aspd_error : Current airspeed error in meters/second (float) + xtrack_error : Current crosstrack error on x-y plane in meters (float) + + ''' + return self.send(self.nav_controller_output_encode(nav_roll, nav_pitch, nav_bearing, target_bearing, wp_dist, alt_error, aspd_error, xtrack_error)) + + def position_target_encode(self, x, y, z, yaw): + ''' + The goal position of the system. This position is the input to any + navigation or path planning algorithm and does NOT + represent the current controller setpoint. + + x : x position (float) + y : y position (float) + z : z position (float) + yaw : yaw orientation in radians, 0 = NORTH (float) + + ''' + msg = MAVLink_position_target_message(x, y, z, yaw) + msg.pack(self) + return msg + + def position_target_send(self, x, y, z, yaw): + ''' + The goal position of the system. This position is the input to any + navigation or path planning algorithm and does NOT + represent the current controller setpoint. + + x : x position (float) + y : y position (float) + z : z position (float) + yaw : yaw orientation in radians, 0 = NORTH (float) + + ''' + return self.send(self.position_target_encode(x, y, z, yaw)) + + def state_correction_encode(self, xErr, yErr, zErr, rollErr, pitchErr, yawErr, vxErr, vyErr, vzErr): + ''' + Corrects the systems state by adding an error correction term to the + position and velocity, and by rotating the attitude by + a correction angle. + + xErr : x position error (float) + yErr : y position error (float) + zErr : z position error (float) + rollErr : roll error (radians) (float) + pitchErr : pitch error (radians) (float) + yawErr : yaw error (radians) (float) + vxErr : x velocity (float) + vyErr : y velocity (float) + vzErr : z velocity (float) + + ''' + msg = MAVLink_state_correction_message(xErr, yErr, zErr, rollErr, pitchErr, yawErr, vxErr, vyErr, vzErr) + msg.pack(self) + return msg + + def state_correction_send(self, xErr, yErr, zErr, rollErr, pitchErr, yawErr, vxErr, vyErr, vzErr): + ''' + Corrects the systems state by adding an error correction term to the + position and velocity, and by rotating the attitude by + a correction angle. + + xErr : x position error (float) + yErr : y position error (float) + zErr : z position error (float) + rollErr : roll error (radians) (float) + pitchErr : pitch error (radians) (float) + yawErr : yaw error (radians) (float) + vxErr : x velocity (float) + vyErr : y velocity (float) + vzErr : z velocity (float) + + ''' + return self.send(self.state_correction_encode(xErr, yErr, zErr, rollErr, pitchErr, yawErr, vxErr, vyErr, vzErr)) + + def set_altitude_encode(self, target, mode): + ''' + + + target : The system setting the altitude (uint8_t) + mode : The new altitude in meters (uint32_t) + + ''' + msg = MAVLink_set_altitude_message(target, mode) + msg.pack(self) + return msg + + def set_altitude_send(self, target, mode): + ''' + + + target : The system setting the altitude (uint8_t) + mode : The new altitude in meters (uint32_t) + + ''' + return self.send(self.set_altitude_encode(target, mode)) + + def request_data_stream_encode(self, target_system, target_component, req_stream_id, req_message_rate, start_stop): + ''' + + + target_system : The target requested to send the message stream. (uint8_t) + target_component : The target requested to send the message stream. (uint8_t) + req_stream_id : The ID of the requested message type (uint8_t) + req_message_rate : Update rate in Hertz (uint16_t) + start_stop : 1 to start sending, 0 to stop sending. (uint8_t) + + ''' + msg = MAVLink_request_data_stream_message(target_system, target_component, req_stream_id, req_message_rate, start_stop) + msg.pack(self) + return msg + + def request_data_stream_send(self, target_system, target_component, req_stream_id, req_message_rate, start_stop): + ''' + + + target_system : The target requested to send the message stream. (uint8_t) + target_component : The target requested to send the message stream. (uint8_t) + req_stream_id : The ID of the requested message type (uint8_t) + req_message_rate : Update rate in Hertz (uint16_t) + start_stop : 1 to start sending, 0 to stop sending. (uint8_t) + + ''' + return self.send(self.request_data_stream_encode(target_system, target_component, req_stream_id, req_message_rate, start_stop)) + + def hil_state_encode(self, usec, roll, pitch, yaw, rollspeed, pitchspeed, yawspeed, lat, lon, alt, vx, vy, vz, xacc, yacc, zacc): + ''' + This packet is useful for high throughput applications + such as hardware in the loop simulations. + + usec : Timestamp (microseconds since UNIX epoch or microseconds since system boot) (uint64_t) + roll : Roll angle (rad) (float) + pitch : Pitch angle (rad) (float) + yaw : Yaw angle (rad) (float) + rollspeed : Roll angular speed (rad/s) (float) + pitchspeed : Pitch angular speed (rad/s) (float) + yawspeed : Yaw angular speed (rad/s) (float) + lat : Latitude, expressed as * 1E7 (int32_t) + lon : Longitude, expressed as * 1E7 (int32_t) + alt : Altitude in meters, expressed as * 1000 (millimeters) (int32_t) + vx : Ground X Speed (Latitude), expressed as m/s * 100 (int16_t) + vy : Ground Y Speed (Longitude), expressed as m/s * 100 (int16_t) + vz : Ground Z Speed (Altitude), expressed as m/s * 100 (int16_t) + xacc : X acceleration (mg) (int16_t) + yacc : Y acceleration (mg) (int16_t) + zacc : Z acceleration (mg) (int16_t) + + ''' + msg = MAVLink_hil_state_message(usec, roll, pitch, yaw, rollspeed, pitchspeed, yawspeed, lat, lon, alt, vx, vy, vz, xacc, yacc, zacc) + msg.pack(self) + return msg + + def hil_state_send(self, usec, roll, pitch, yaw, rollspeed, pitchspeed, yawspeed, lat, lon, alt, vx, vy, vz, xacc, yacc, zacc): + ''' + This packet is useful for high throughput applications + such as hardware in the loop simulations. + + usec : Timestamp (microseconds since UNIX epoch or microseconds since system boot) (uint64_t) + roll : Roll angle (rad) (float) + pitch : Pitch angle (rad) (float) + yaw : Yaw angle (rad) (float) + rollspeed : Roll angular speed (rad/s) (float) + pitchspeed : Pitch angular speed (rad/s) (float) + yawspeed : Yaw angular speed (rad/s) (float) + lat : Latitude, expressed as * 1E7 (int32_t) + lon : Longitude, expressed as * 1E7 (int32_t) + alt : Altitude in meters, expressed as * 1000 (millimeters) (int32_t) + vx : Ground X Speed (Latitude), expressed as m/s * 100 (int16_t) + vy : Ground Y Speed (Longitude), expressed as m/s * 100 (int16_t) + vz : Ground Z Speed (Altitude), expressed as m/s * 100 (int16_t) + xacc : X acceleration (mg) (int16_t) + yacc : Y acceleration (mg) (int16_t) + zacc : Z acceleration (mg) (int16_t) + + ''' + return self.send(self.hil_state_encode(usec, roll, pitch, yaw, rollspeed, pitchspeed, yawspeed, lat, lon, alt, vx, vy, vz, xacc, yacc, zacc)) + + def hil_controls_encode(self, time_us, roll_ailerons, pitch_elevator, yaw_rudder, throttle, mode, nav_mode): + ''' + Hardware in the loop control outputs + + time_us : Timestamp (microseconds since UNIX epoch or microseconds since system boot) (uint64_t) + roll_ailerons : Control output -3 .. 1 (float) + pitch_elevator : Control output -1 .. 1 (float) + yaw_rudder : Control output -1 .. 1 (float) + throttle : Throttle 0 .. 1 (float) + mode : System mode (MAV_MODE) (uint8_t) + nav_mode : Navigation mode (MAV_NAV_MODE) (uint8_t) + + ''' + msg = MAVLink_hil_controls_message(time_us, roll_ailerons, pitch_elevator, yaw_rudder, throttle, mode, nav_mode) + msg.pack(self) + return msg + + def hil_controls_send(self, time_us, roll_ailerons, pitch_elevator, yaw_rudder, throttle, mode, nav_mode): + ''' + Hardware in the loop control outputs + + time_us : Timestamp (microseconds since UNIX epoch or microseconds since system boot) (uint64_t) + roll_ailerons : Control output -3 .. 1 (float) + pitch_elevator : Control output -1 .. 1 (float) + yaw_rudder : Control output -1 .. 1 (float) + throttle : Throttle 0 .. 1 (float) + mode : System mode (MAV_MODE) (uint8_t) + nav_mode : Navigation mode (MAV_NAV_MODE) (uint8_t) + + ''' + return self.send(self.hil_controls_encode(time_us, roll_ailerons, pitch_elevator, yaw_rudder, throttle, mode, nav_mode)) + + def manual_control_encode(self, target, roll, pitch, yaw, thrust, roll_manual, pitch_manual, yaw_manual, thrust_manual): + ''' + + + target : The system to be controlled (uint8_t) + roll : roll (float) + pitch : pitch (float) + yaw : yaw (float) + thrust : thrust (float) + roll_manual : roll control enabled auto:0, manual:1 (uint8_t) + pitch_manual : pitch auto:0, manual:1 (uint8_t) + yaw_manual : yaw auto:0, manual:1 (uint8_t) + thrust_manual : thrust auto:0, manual:1 (uint8_t) + + ''' + msg = MAVLink_manual_control_message(target, roll, pitch, yaw, thrust, roll_manual, pitch_manual, yaw_manual, thrust_manual) + msg.pack(self) + return msg + + def manual_control_send(self, target, roll, pitch, yaw, thrust, roll_manual, pitch_manual, yaw_manual, thrust_manual): + ''' + + + target : The system to be controlled (uint8_t) + roll : roll (float) + pitch : pitch (float) + yaw : yaw (float) + thrust : thrust (float) + roll_manual : roll control enabled auto:0, manual:1 (uint8_t) + pitch_manual : pitch auto:0, manual:1 (uint8_t) + yaw_manual : yaw auto:0, manual:1 (uint8_t) + thrust_manual : thrust auto:0, manual:1 (uint8_t) + + ''' + return self.send(self.manual_control_encode(target, roll, pitch, yaw, thrust, roll_manual, pitch_manual, yaw_manual, thrust_manual)) + + def rc_channels_override_encode(self, target_system, target_component, chan1_raw, chan2_raw, chan3_raw, chan4_raw, chan5_raw, chan6_raw, chan7_raw, chan8_raw): + ''' + The RAW values of the RC channels sent to the MAV to override info + received from the RC radio. A value of -1 means no + change to that channel. A value of 0 means control of + that channel should be released back to the RC radio. + The standard PPM modulation is as follows: 1000 + microseconds: 0%, 2000 microseconds: 100%. Individual + receivers/transmitters might violate this + specification. + + target_system : System ID (uint8_t) + target_component : Component ID (uint8_t) + chan1_raw : RC channel 1 value, in microseconds (uint16_t) + chan2_raw : RC channel 2 value, in microseconds (uint16_t) + chan3_raw : RC channel 3 value, in microseconds (uint16_t) + chan4_raw : RC channel 4 value, in microseconds (uint16_t) + chan5_raw : RC channel 5 value, in microseconds (uint16_t) + chan6_raw : RC channel 6 value, in microseconds (uint16_t) + chan7_raw : RC channel 7 value, in microseconds (uint16_t) + chan8_raw : RC channel 8 value, in microseconds (uint16_t) + + ''' + msg = MAVLink_rc_channels_override_message(target_system, target_component, chan1_raw, chan2_raw, chan3_raw, chan4_raw, chan5_raw, chan6_raw, chan7_raw, chan8_raw) + msg.pack(self) + return msg + + def rc_channels_override_send(self, target_system, target_component, chan1_raw, chan2_raw, chan3_raw, chan4_raw, chan5_raw, chan6_raw, chan7_raw, chan8_raw): + ''' + The RAW values of the RC channels sent to the MAV to override info + received from the RC radio. A value of -1 means no + change to that channel. A value of 0 means control of + that channel should be released back to the RC radio. + The standard PPM modulation is as follows: 1000 + microseconds: 0%, 2000 microseconds: 100%. Individual + receivers/transmitters might violate this + specification. + + target_system : System ID (uint8_t) + target_component : Component ID (uint8_t) + chan1_raw : RC channel 1 value, in microseconds (uint16_t) + chan2_raw : RC channel 2 value, in microseconds (uint16_t) + chan3_raw : RC channel 3 value, in microseconds (uint16_t) + chan4_raw : RC channel 4 value, in microseconds (uint16_t) + chan5_raw : RC channel 5 value, in microseconds (uint16_t) + chan6_raw : RC channel 6 value, in microseconds (uint16_t) + chan7_raw : RC channel 7 value, in microseconds (uint16_t) + chan8_raw : RC channel 8 value, in microseconds (uint16_t) + + ''' + return self.send(self.rc_channels_override_encode(target_system, target_component, chan1_raw, chan2_raw, chan3_raw, chan4_raw, chan5_raw, chan6_raw, chan7_raw, chan8_raw)) + + def global_position_int_encode(self, lat, lon, alt, vx, vy, vz): + ''' + The filtered global position (e.g. fused GPS and accelerometers). The + position is in GPS-frame (right-handed, Z-up) + + lat : Latitude, expressed as * 1E7 (int32_t) + lon : Longitude, expressed as * 1E7 (int32_t) + alt : Altitude in meters, expressed as * 1000 (millimeters) (int32_t) + vx : Ground X Speed (Latitude), expressed as m/s * 100 (int16_t) + vy : Ground Y Speed (Longitude), expressed as m/s * 100 (int16_t) + vz : Ground Z Speed (Altitude), expressed as m/s * 100 (int16_t) + + ''' + msg = MAVLink_global_position_int_message(lat, lon, alt, vx, vy, vz) + msg.pack(self) + return msg + + def global_position_int_send(self, lat, lon, alt, vx, vy, vz): + ''' + The filtered global position (e.g. fused GPS and accelerometers). The + position is in GPS-frame (right-handed, Z-up) + + lat : Latitude, expressed as * 1E7 (int32_t) + lon : Longitude, expressed as * 1E7 (int32_t) + alt : Altitude in meters, expressed as * 1000 (millimeters) (int32_t) + vx : Ground X Speed (Latitude), expressed as m/s * 100 (int16_t) + vy : Ground Y Speed (Longitude), expressed as m/s * 100 (int16_t) + vz : Ground Z Speed (Altitude), expressed as m/s * 100 (int16_t) + + ''' + return self.send(self.global_position_int_encode(lat, lon, alt, vx, vy, vz)) + + def vfr_hud_encode(self, airspeed, groundspeed, heading, throttle, alt, climb): + ''' + Metrics typically displayed on a HUD for fixed wing aircraft + + airspeed : Current airspeed in m/s (float) + groundspeed : Current ground speed in m/s (float) + heading : Current heading in degrees, in compass units (0..360, 0=north) (int16_t) + throttle : Current throttle setting in integer percent, 0 to 100 (uint16_t) + alt : Current altitude (MSL), in meters (float) + climb : Current climb rate in meters/second (float) + + ''' + msg = MAVLink_vfr_hud_message(airspeed, groundspeed, heading, throttle, alt, climb) + msg.pack(self) + return msg + + def vfr_hud_send(self, airspeed, groundspeed, heading, throttle, alt, climb): + ''' + Metrics typically displayed on a HUD for fixed wing aircraft + + airspeed : Current airspeed in m/s (float) + groundspeed : Current ground speed in m/s (float) + heading : Current heading in degrees, in compass units (0..360, 0=north) (int16_t) + throttle : Current throttle setting in integer percent, 0 to 100 (uint16_t) + alt : Current altitude (MSL), in meters (float) + climb : Current climb rate in meters/second (float) + + ''' + return self.send(self.vfr_hud_encode(airspeed, groundspeed, heading, throttle, alt, climb)) + + def command_encode(self, target_system, target_component, command, confirmation, param1, param2, param3, param4): + ''' + Send a command with up to four parameters to the MAV + + target_system : System which should execute the command (uint8_t) + target_component : Component which should execute the command, 0 for all components (uint8_t) + command : Command ID, as defined by MAV_CMD enum. (uint8_t) + confirmation : 0: First transmission of this command. 1-255: Confirmation transmissions (e.g. for kill command) (uint8_t) + param1 : Parameter 1, as defined by MAV_CMD enum. (float) + param2 : Parameter 2, as defined by MAV_CMD enum. (float) + param3 : Parameter 3, as defined by MAV_CMD enum. (float) + param4 : Parameter 4, as defined by MAV_CMD enum. (float) + + ''' + msg = MAVLink_command_message(target_system, target_component, command, confirmation, param1, param2, param3, param4) + msg.pack(self) + return msg + + def command_send(self, target_system, target_component, command, confirmation, param1, param2, param3, param4): + ''' + Send a command with up to four parameters to the MAV + + target_system : System which should execute the command (uint8_t) + target_component : Component which should execute the command, 0 for all components (uint8_t) + command : Command ID, as defined by MAV_CMD enum. (uint8_t) + confirmation : 0: First transmission of this command. 1-255: Confirmation transmissions (e.g. for kill command) (uint8_t) + param1 : Parameter 1, as defined by MAV_CMD enum. (float) + param2 : Parameter 2, as defined by MAV_CMD enum. (float) + param3 : Parameter 3, as defined by MAV_CMD enum. (float) + param4 : Parameter 4, as defined by MAV_CMD enum. (float) + + ''' + return self.send(self.command_encode(target_system, target_component, command, confirmation, param1, param2, param3, param4)) + + def command_ack_encode(self, command, result): + ''' + Report status of a command. Includes feedback wether the command was + executed + + command : Current airspeed in m/s (float) + result : 1: Action ACCEPTED and EXECUTED, 1: Action TEMPORARY REJECTED/DENIED, 2: Action PERMANENTLY DENIED, 3: Action UNKNOWN/UNSUPPORTED, 4: Requesting CONFIRMATION (float) + + ''' + msg = MAVLink_command_ack_message(command, result) + msg.pack(self) + return msg + + def command_ack_send(self, command, result): + ''' + Report status of a command. Includes feedback wether the command was + executed + + command : Current airspeed in m/s (float) + result : 1: Action ACCEPTED and EXECUTED, 1: Action TEMPORARY REJECTED/DENIED, 2: Action PERMANENTLY DENIED, 3: Action UNKNOWN/UNSUPPORTED, 4: Requesting CONFIRMATION (float) + + ''' + return self.send(self.command_ack_encode(command, result)) + + def optical_flow_encode(self, time, sensor_id, flow_x, flow_y, quality, ground_distance): + ''' + Optical flow from a flow sensor (e.g. optical mouse sensor) + + time : Timestamp (UNIX) (uint64_t) + sensor_id : Sensor ID (uint8_t) + flow_x : Flow in pixels in x-sensor direction (int16_t) + flow_y : Flow in pixels in y-sensor direction (int16_t) + quality : Optical flow quality / confidence. 0: bad, 255: maximum quality (uint8_t) + ground_distance : Ground distance in meters (float) + + ''' + msg = MAVLink_optical_flow_message(time, sensor_id, flow_x, flow_y, quality, ground_distance) + msg.pack(self) + return msg + + def optical_flow_send(self, time, sensor_id, flow_x, flow_y, quality, ground_distance): + ''' + Optical flow from a flow sensor (e.g. optical mouse sensor) + + time : Timestamp (UNIX) (uint64_t) + sensor_id : Sensor ID (uint8_t) + flow_x : Flow in pixels in x-sensor direction (int16_t) + flow_y : Flow in pixels in y-sensor direction (int16_t) + quality : Optical flow quality / confidence. 0: bad, 255: maximum quality (uint8_t) + ground_distance : Ground distance in meters (float) + + ''' + return self.send(self.optical_flow_encode(time, sensor_id, flow_x, flow_y, quality, ground_distance)) + + def object_detection_event_encode(self, time, object_id, type, name, quality, bearing, distance): + ''' + Object has been detected + + time : Timestamp in milliseconds since system boot (uint32_t) + object_id : Object ID (uint16_t) + type : Object type: 0: image, 1: letter, 2: ground vehicle, 3: air vehicle, 4: surface vehicle, 5: sub-surface vehicle, 6: human, 7: animal (uint8_t) + name : Name of the object as defined by the detector (char) + quality : Detection quality / confidence. 0: bad, 255: maximum confidence (uint8_t) + bearing : Angle of the object with respect to the body frame in NED coordinates in radians. 0: front (float) + distance : Ground distance in meters (float) + + ''' + msg = MAVLink_object_detection_event_message(time, object_id, type, name, quality, bearing, distance) + msg.pack(self) + return msg + + def object_detection_event_send(self, time, object_id, type, name, quality, bearing, distance): + ''' + Object has been detected + + time : Timestamp in milliseconds since system boot (uint32_t) + object_id : Object ID (uint16_t) + type : Object type: 0: image, 1: letter, 2: ground vehicle, 3: air vehicle, 4: surface vehicle, 5: sub-surface vehicle, 6: human, 7: animal (uint8_t) + name : Name of the object as defined by the detector (char) + quality : Detection quality / confidence. 0: bad, 255: maximum confidence (uint8_t) + bearing : Angle of the object with respect to the body frame in NED coordinates in radians. 0: front (float) + distance : Ground distance in meters (float) + + ''' + return self.send(self.object_detection_event_encode(time, object_id, type, name, quality, bearing, distance)) + + def debug_vect_encode(self, name, usec, x, y, z): + ''' + + + name : Name (char) + usec : Timestamp (uint64_t) + x : x (float) + y : y (float) + z : z (float) + + ''' + msg = MAVLink_debug_vect_message(name, usec, x, y, z) + msg.pack(self) + return msg + + def debug_vect_send(self, name, usec, x, y, z): + ''' + + + name : Name (char) + usec : Timestamp (uint64_t) + x : x (float) + y : y (float) + z : z (float) + + ''' + return self.send(self.debug_vect_encode(name, usec, x, y, z)) + + def named_value_float_encode(self, name, value): + ''' + Send a key-value pair as float. The use of this message is discouraged + for normal packets, but a quite efficient way for + testing new messages and getting experimental debug + output. + + name : Name of the debug variable (char) + value : Floating point value (float) + + ''' + msg = MAVLink_named_value_float_message(name, value) + msg.pack(self) + return msg + + def named_value_float_send(self, name, value): + ''' + Send a key-value pair as float. The use of this message is discouraged + for normal packets, but a quite efficient way for + testing new messages and getting experimental debug + output. + + name : Name of the debug variable (char) + value : Floating point value (float) + + ''' + return self.send(self.named_value_float_encode(name, value)) + + def named_value_int_encode(self, name, value): + ''' + Send a key-value pair as integer. The use of this message is + discouraged for normal packets, but a quite efficient + way for testing new messages and getting experimental + debug output. + + name : Name of the debug variable (char) + value : Signed integer value (int32_t) + + ''' + msg = MAVLink_named_value_int_message(name, value) + msg.pack(self) + return msg + + def named_value_int_send(self, name, value): + ''' + Send a key-value pair as integer. The use of this message is + discouraged for normal packets, but a quite efficient + way for testing new messages and getting experimental + debug output. + + name : Name of the debug variable (char) + value : Signed integer value (int32_t) + + ''' + return self.send(self.named_value_int_encode(name, value)) + + def statustext_encode(self, severity, text): + ''' + Status text message. These messages are printed in yellow in the COMM + console of QGroundControl. WARNING: They consume quite + some bandwidth, so use only for important status and + error messages. If implemented wisely, these messages + are buffered on the MCU and sent only at a limited + rate (e.g. 10 Hz). + + severity : Severity of status, 0 = info message, 255 = critical fault (uint8_t) + text : Status text message, without null termination character (int8_t) + + ''' + msg = MAVLink_statustext_message(severity, text) + msg.pack(self) + return msg + + def statustext_send(self, severity, text): + ''' + Status text message. These messages are printed in yellow in the COMM + console of QGroundControl. WARNING: They consume quite + some bandwidth, so use only for important status and + error messages. If implemented wisely, these messages + are buffered on the MCU and sent only at a limited + rate (e.g. 10 Hz). + + severity : Severity of status, 0 = info message, 255 = critical fault (uint8_t) + text : Status text message, without null termination character (int8_t) + + ''' + return self.send(self.statustext_encode(severity, text)) + + def debug_encode(self, ind, value): + ''' + Send a debug value. The index is used to discriminate between values. + These values show up in the plot of QGroundControl as + DEBUG N. + + ind : index of debug variable (uint8_t) + value : DEBUG value (float) + + ''' + msg = MAVLink_debug_message(ind, value) + msg.pack(self) + return msg + + def debug_send(self, ind, value): + ''' + Send a debug value. The index is used to discriminate between values. + These values show up in the plot of QGroundControl as + DEBUG N. + + ind : index of debug variable (uint8_t) + value : DEBUG value (float) + + ''' + return self.send(self.debug_encode(ind, value)) + -- cgit v1.2.3