From 57623d42ebb04f0a0b9e6eb7c0847a3ece2aa0ff Mon Sep 17 00:00:00 2001 From: patacongo Date: Mon, 17 Sep 2012 18:18:44 +0000 Subject: Resync new repository with old repo r5166 git-svn-id: http://svn.code.sf.net/p/nuttx/code/trunk@5153 42af7a65-404d-4744-a932-0658087f49c3 --- nuttx/arch/arm/src/lpc43xx/lpc43_usb0dev.c | 2671 ++++++++++++++++++++++++++++ 1 file changed, 2671 insertions(+) create mode 100644 nuttx/arch/arm/src/lpc43xx/lpc43_usb0dev.c (limited to 'nuttx/arch/arm/src/lpc43xx/lpc43_usb0dev.c') diff --git a/nuttx/arch/arm/src/lpc43xx/lpc43_usb0dev.c b/nuttx/arch/arm/src/lpc43xx/lpc43_usb0dev.c new file mode 100644 index 000000000..a40d6492d --- /dev/null +++ b/nuttx/arch/arm/src/lpc43xx/lpc43_usb0dev.c @@ -0,0 +1,2671 @@ +/******************************************************************************* + * arch/arm/src/lpc43xx/lpc43_usbdev.c + * + * Copyright (C) 2012 Gregory Nutt. All rights reserved. + * Author: Gregory Nutt + * + * Part of the NuttX OS and based, in part, on the LPC31xx USB driver: + * + * Authors: David Hewson + * Gregory Nutt + * + * Which, in turn, was based on the LPC2148 USB driver: + * + * Copyright (C) 2010-2012 Gregory Nutt. All rights reserved. + * Author: Gregory Nutt + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * 3. Neither the name NuttX nor the names of its contributors may be + * used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS + * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE + * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, + * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS + * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED + * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN + * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + * + *******************************************************************************/ + +/******************************************************************************* + * Included Files + *******************************************************************************/ + +#include + +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include + +#include +#include + +#include "chip.h" +#include "up_arch.h" +#include "up_internal.h" + +#include "lpc43_usb0dev.h" + +/******************************************************************************* + * Definitions + *******************************************************************************/ + +/* Configuration ***************************************************************/ + +#ifndef CONFIG_USBDEV_EP0_MAXSIZE +# define CONFIG_USBDEV_EP0_MAXSIZE 64 +#endif + +#ifndef CONFIG_USBDEV_MAXPOWER +# define CONFIG_USBDEV_MAXPOWER 100 /* mA */ +#endif + +/* Extremely detailed register debug that you would normally never want + * enabled. + */ + +#undef CONFIG_LPC43_USBDEV_REGDEBUG + +/* Enable reading SOF from interrupt handler vs. simply reading on demand. Probably + * a bad idea... Unless there is some issue with sampling the SOF from hardware + * asynchronously. + */ + +#ifdef CONFIG_LPC43_USBDEV_FRAME_INTERRUPT +# define USB_FRAME_INT USBDEV_USBINTR_SRE +#else +# define USB_FRAME_INT 0 +#endif + +#ifdef CONFIG_DEBUG +# define USB_ERROR_INT USBDEV_USBINTR_UEE +#else +# define USB_ERROR_INT 0 +#endif + +/* Debug ***********************************************************************/ + +/* Trace error codes */ + +#define LPC43_TRACEERR_ALLOCFAIL 0x0001 +#define LPC43_TRACEERR_BADCLEARFEATURE 0x0002 +#define LPC43_TRACEERR_BADDEVGETSTATUS 0x0003 +#define LPC43_TRACEERR_BADEPNO 0x0004 +#define LPC43_TRACEERR_BADEPGETSTATUS 0x0005 +#define LPC43_TRACEERR_BADEPTYPE 0x0006 +#define LPC43_TRACEERR_BADGETCONFIG 0x0007 +#define LPC43_TRACEERR_BADGETSETDESC 0x0008 +#define LPC43_TRACEERR_BADGETSTATUS 0x0009 +#define LPC43_TRACEERR_BADSETADDRESS 0x000a +#define LPC43_TRACEERR_BADSETCONFIG 0x000b +#define LPC43_TRACEERR_BADSETFEATURE 0x000c +#define LPC43_TRACEERR_BINDFAILED 0x000d +#define LPC43_TRACEERR_DISPATCHSTALL 0x000e +#define LPC43_TRACEERR_DRIVER 0x000f +#define LPC43_TRACEERR_DRIVERREGISTERED 0x0010 +#define LPC43_TRACEERR_EP0SETUPSTALLED 0x0011 +#define LPC43_TRACEERR_EPINNULLPACKET 0x0012 +#define LPC43_TRACEERR_EPOUTNULLPACKET 0x0013 +#define LPC43_TRACEERR_INVALIDCTRLREQ 0x0014 +#define LPC43_TRACEERR_INVALIDPARMS 0x0015 +#define LPC43_TRACEERR_IRQREGISTRATION 0x0016 +#define LPC43_TRACEERR_NOEP 0x0017 +#define LPC43_TRACEERR_NOTCONFIGURED 0x0018 +#define LPC43_TRACEERR_REQABORTED 0x0019 + +/* Trace interrupt codes */ + +#define LPC43_TRACEINTID_USB 0x0001 +#define LPC43_TRACEINTID_CLEARFEATURE 0x0002 +#define LPC43_TRACEINTID_DEVGETSTATUS 0x0003 +#define LPC43_TRACEINTID_DEVRESET 0x0004 +#define LPC43_TRACEINTID_DISPATCH 0x0005 +#define LPC43_TRACEINTID_EP0COMPLETE 0x0006 +#define LPC43_TRACEINTID_EP0NAK 0x0007 +#define LPC43_TRACEINTID_EP0SETUP 0x0008 +#define LPC43_TRACEINTID_EPGETSTATUS 0x0009 +#define LPC43_TRACEINTID_EPIN 0x000a +#define LPC43_TRACEINTID_EPINQEMPTY 0x000b +#define LPC43_TRACEINTID_EP0INSETADDRESS 0x000c +#define LPC43_TRACEINTID_EPOUT 0x000d +#define LPC43_TRACEINTID_EPOUTQEMPTY 0x000e +#define LPC43_TRACEINTID_EP0SETUPSETADDRESS 0x000f +#define LPC43_TRACEINTID_FRAME 0x0010 +#define LPC43_TRACEINTID_GETCONFIG 0x0011 +#define LPC43_TRACEINTID_GETSETDESC 0x0012 +#define LPC43_TRACEINTID_GETSETIF 0x0013 +#define LPC43_TRACEINTID_GETSTATUS 0x0014 +#define LPC43_TRACEINTID_IFGETSTATUS 0x0015 +#define LPC43_TRACEINTID_SETCONFIG 0x0016 +#define LPC43_TRACEINTID_SETFEATURE 0x0017 +#define LPC43_TRACEINTID_SUSPENDCHG 0x0018 +#define LPC43_TRACEINTID_SYNCHFRAME 0x0019 + +/* Hardware interface **********************************************************/ + +/* This represents a Endpoint Transfer Descriptor - note these must be 32 byte aligned */ +struct lpc43_dtd_s +{ + volatile uint32_t nextdesc; /* Address of the next DMA descripto in RAM */ + volatile uint32_t config; /* Misc. bit encoded configuration information */ + uint32_t buffer0; /* Buffer start address */ + uint32_t buffer1; /* Buffer start address */ + uint32_t buffer2; /* Buffer start address */ + uint32_t buffer3; /* Buffer start address */ + uint32_t buffer4; /* Buffer start address */ + uint32_t xfer_len; /* Software only - transfer len that was queued */ +}; + +/* DTD nextdesc field*/ +#define DTD_NEXTDESC_INVALID (1 << 0) /* Bit 0 : Next Descriptor Invalid */ + +/* DTD config field */ +#define DTD_CONFIG_LENGTH(n) ((n) << 16) /* Bits 16-31 : Total bytes to transfer */ +#define DTD_CONFIG_IOC (1 << 15) /* Bit 15 : Interrupt on Completion */ +#define DTD_CONFIG_MULT_VARIABLE (0 << 10) /* Bits 10-11 : Number of packets executed per transacation descriptor (override) */ +#define DTD_CONFIG_MULT_NUM(n) ((n) << 10) +#define DTD_CONFIG_ACTIVE (1 << 7) /* Bit 7 : Status Active */ +#define DTD_CONFIG_HALTED (1 << 6) /* Bit 6 : Status Halted */ +#define DTD_CONFIG_BUFFER_ERROR (1 << 5) /* Bit 6 : Status Buffer Error */ +#define DTD_CONFIG_TRANSACTION_ERROR (1 << 3) /* Bit 3 : Status Transaction Error */ + +/* This represents a queue head - not these must be aligned to a 2048 byte boundary */ +struct lpc43_dqh_s +{ + uint32_t capability; /* Endpoint capability */ + uint32_t currdesc; /* Current dTD pointer */ + struct lpc43_dtd_s overlay; /* DTD overlay */ + volatile uint32_t setup[2]; /* Set-up buffer */ + uint32_t gap[4]; /* align to 64 bytes */ +}; + +/* DQH capability field */ +#define DQH_CAPABILITY_MULT_VARIABLE (0 << 30) /* Bits 30-31 : Number of packets executed per transaction descriptor */ +#define DQH_CAPABILITY_MULT_NUM(n) ((n) << 30) +#define DQH_CAPABILITY_ZLT (1 << 29) /* Bit 29 : Zero Length Termination Select */ +#define DQH_CAPABILITY_MAX_PACKET(n) ((n) << 16) /* Bits 16-29 : Maximum packet size of associated endpoint (<1024) */ +#define DQH_CAPABILITY_IOS (1 << 15) /* Bit 15 : Interrupt on Setup */ + +/* Endpoints ******************************************************************/ + +/* Number of endpoints */ +#define LPC43_NLOGENDPOINTS (4) /* ep0-3 */ +#define LPC43_NPHYSENDPOINTS (8) /* x2 for IN and OUT */ + +/* Odd physical endpoint numbers are IN; even are OUT */ +#define LPC43_EPPHYIN(epphy) (((epphy)&1)!=0) +#define LPC43_EPPHYOUT(epphy) (((epphy)&1)==0) + +#define LPC43_EPPHYIN2LOG(epphy) (((uint8_t)(epphy)>>1)|USB_DIR_IN) +#define LPC43_EPPHYOUT2LOG(epphy) (((uint8_t)(epphy)>>1)|USB_DIR_OUT) + +/* Endpoint 0 is special... */ +#define LPC43_EP0_OUT (0) +#define LPC43_EP0_IN (1) + +/* Each endpoint has somewhat different characteristics */ +#define LPC43_EPALLSET (0xff) /* All endpoints */ +#define LPC43_EPOUTSET (0x55) /* Even phy endpoint numbers are OUT EPs */ +#define LPC43_EPINSET (0xaa) /* Odd endpoint numbers are IN EPs */ +#define LPC43_EPCTRLSET (0x03) /* EP0 IN/OUT are control endpoints */ +#define LPC43_EPINTRSET (0xa8) /* Interrupt endpoints */ +#define LPC43_EPBULKSET (0xfc) /* Bulk endpoints */ +#define LPC43_EPISOCSET (0xfc) /* Isochronous endpoints */ + +/* Maximum packet sizes for endpoints */ +#define LPC43_EP0MAXPACKET (64) /* EP0 max packet size (1-64) */ +#define LPC43_BULKMAXPACKET (512) /* Bulk endpoint max packet (8/16/32/64/512) */ +#define LPC43_INTRMAXPACKET (1024) /* Interrupt endpoint max packet (1 to 1024) */ +#define LPC43_ISOCMAXPACKET (512) /* Acutally 1..1023 */ + +/* The address of the endpoint control register */ +#define LPC43_USBDEV_ENDPTCTRL(epphy) (LPC43_USBDEV_ENDPTCTRL0 + ((epphy)>>1)*4) + +/* Endpoint bit position in SETUPSTAT, PRIME, FLUSH, STAT, COMPLETE registers */ +#define LPC43_ENDPTSHIFT(epphy) (LPC43_EPPHYIN(epphy) ? (16 + ((epphy) >> 1)) : ((epphy) >> 1)) +#define LPC43_ENDPTMASK(epphy) (1 << LPC43_ENDPTSHIFT(epphy)) +#define LPC43_ENDPTMASK_ALL 0x000f000f + +/* Request queue operations ****************************************************/ + +#define lpc43_rqempty(ep) ((ep)->head == NULL) +#define lpc43_rqpeek(ep) ((ep)->head) + +/******************************************************************************* + * Private Types + *******************************************************************************/ + +/* A container for a request so that the request may be retained in a list */ + +struct lpc43_req_s +{ + struct usbdev_req_s req; /* Standard USB request */ + struct lpc43_req_s *flink; /* Supports a singly linked list */ +}; + +/* This is the internal representation of an endpoint */ + +struct lpc43_ep_s +{ + /* Common endpoint fields. This must be the first thing defined in the + * structure so that it is possible to simply cast from struct usbdev_ep_s + * to struct lpc43_ep_s. + */ + + struct usbdev_ep_s ep; /* Standard endpoint structure */ + + /* LPC43XX-specific fields */ + + struct lpc43_usbdev_s *dev; /* Reference to private driver data */ + struct lpc43_req_s *head; /* Request list for this endpoint */ + struct lpc43_req_s *tail; + uint8_t epphy; /* Physical EP address */ + uint8_t stalled:1; /* 1: Endpoint is stalled */ +}; + +/* This structure retains the state of the USB device controller */ + +struct lpc43_usbdev_s +{ + /* Common device fields. This must be the first thing defined in the + * structure so that it is possible to simply cast from struct usbdev_s + * to struct lpc43_usbdev_s. + */ + + struct usbdev_s usbdev; + + /* The bound device class driver */ + + struct usbdevclass_driver_s *driver; + + /* LPC43XX-specific fields */ + + uint8_t ep0state; /* State of certain EP0 operations */ + uint8_t ep0buf[64]; /* buffer for EP0 short transfers */ + uint8_t paddr; /* Address assigned by SETADDRESS */ + uint8_t stalled:1; /* 1: Protocol stalled */ + uint8_t selfpowered:1; /* 1: Device is self powered */ + uint8_t paddrset:1; /* 1: Peripheral addr has been set */ + uint8_t attached:1; /* 1: Host attached */ + uint32_t softprio; /* Bitset of high priority interrupts */ + uint32_t epavail; /* Bitset of available endpoints */ +#ifdef CONFIG_LPC43_USBDEV_FRAME_INTERRUPT + uint32_t sof; /* Last start-of-frame */ +#endif + + /* The endpoint list */ + struct lpc43_ep_s eplist[LPC43_NPHYSENDPOINTS]; +}; + +#define EP0STATE_IDLE 0 /* Idle State, leave on receiving a setup packet or epsubmit */ +#define EP0STATE_SETUP_OUT 1 /* Setup Packet received - SET/CLEAR */ +#define EP0STATE_SETUP_IN 2 /* Setup Packet received - GET */ +#define EP0STATE_SHORTWRITE 3 /* Short write without a usb_request */ +#define EP0STATE_WAIT_NAK_OUT 4 /* Waiting for Host to illicit status phase (GET) */ +#define EP0STATE_WAIT_NAK_IN 5 /* Waiting for Host to illicit status phase (SET/CLEAR) */ +#define EP0STATE_WAIT_STATUS_OUT 6 /* Wait for status phase to complete */ +#define EP0STATE_WAIT_STATUS_IN 7 /* Wait for status phase to complete */ +#define EP0STATE_DATA_IN 8 +#define EP0STATE_DATA_OUT 9 + +/******************************************************************************* + * Private Function Prototypes + *******************************************************************************/ + +/* Register operations ********************************************************/ + +#if defined(CONFIG_LPC43_USBDEV_REGDEBUG) && defined(CONFIG_DEBUG) +static uint32_t lpc43_getreg(uint32_t addr); +static void lpc43_putreg(uint32_t val, uint32_t addr); +#else +# define lpc43_getreg(addr) getreg32(addr) +# define lpc43_putreg(val,addr) putreg32(val,addr) +#endif + +static inline void lpc43_clrbits(uint32_t mask, uint32_t addr); +static inline void lpc43_setbits(uint32_t mask, uint32_t addr); +static inline void lpc43_chgbits(uint32_t mask, uint32_t val, uint32_t addr); + +/* Request queue operations ****************************************************/ + +static FAR struct lpc43_req_s *lpc43_rqdequeue(FAR struct lpc43_ep_s *privep); +static bool lpc43_rqenqueue(FAR struct lpc43_ep_s *privep, + FAR struct lpc43_req_s *req); + +/* Low level data transfers and request operations *****************************/ + +static inline void lpc43_writedtd(struct lpc43_dtd_s *dtd, const uint8_t *data, + uint32_t nbytes); +static inline void lpc43_queuedtd(uint8_t epphy, struct lpc43_dtd_s *dtd); +static inline void lpc43_ep0xfer(uint8_t epphy, uint8_t *data, uint32_t nbytes); +static void lpc43_readsetup(uint8_t epphy, struct usb_ctrlreq_s *ctrl); + +static inline void lpc43_set_address(struct lpc43_usbdev_s *priv, uint16_t address); + +static void lpc43_flushep(struct lpc43_ep_s *privep); + +static int lpc43_progressep(struct lpc43_ep_s *privep); +static inline void lpc43_abortrequest(struct lpc43_ep_s *privep, + struct lpc43_req_s *privreq, int16_t result); +static void lpc43_reqcomplete(struct lpc43_ep_s *privep, + struct lpc43_req_s *privreq, int16_t result); + +static void lpc43_cancelrequests(struct lpc43_ep_s *privep, int16_t status); + +/* Interrupt handling **********************************************************/ +static struct lpc43_ep_s *lpc43_epfindbyaddr(struct lpc43_usbdev_s *priv, + uint16_t eplog); +static void lpc43_dispatchrequest(struct lpc43_usbdev_s *priv, + const struct usb_ctrlreq_s *ctrl); +static void lpc43_ep0configure(struct lpc43_usbdev_s *priv); +static void lpc43_usbreset(struct lpc43_usbdev_s *priv); + +static inline void lpc43_ep0state(struct lpc43_usbdev_s *priv, uint16_t state); +static void lpc43_ep0setup(struct lpc43_usbdev_s *priv); + +static void lpc43_ep0complete(struct lpc43_usbdev_s *priv, uint8_t epphy); +static void lpc43_ep0nak(struct lpc43_usbdev_s *priv, uint8_t epphy); +static bool lpc43_epcomplete(struct lpc43_usbdev_s *priv, uint8_t epphy); + +static int lpc43_usbinterrupt(int irq, FAR void *context); + +/* Endpoint operations *********************************************************/ + +/* USB device controller operations ********************************************/ + +static int lpc43_epconfigure(FAR struct usbdev_ep_s *ep, + const struct usb_epdesc_s *desc, bool last); +static int lpc43_epdisable(FAR struct usbdev_ep_s *ep); +static FAR struct usbdev_req_s *lpc43_epallocreq(FAR struct usbdev_ep_s *ep); +static void lpc43_epfreereq(FAR struct usbdev_ep_s *ep, + FAR struct usbdev_req_s *); +#ifdef CONFIG_USBDEV_DMA +static void *lpc43_epallocbuffer(FAR struct usbdev_ep_s *ep, unsigned bytes); +static void lpc43_epfreebuffer(FAR struct usbdev_ep_s *ep, FAR void *buf); +#endif +static int lpc43_epsubmit(FAR struct usbdev_ep_s *ep, + struct usbdev_req_s *req); +static int lpc43_epcancel(FAR struct usbdev_ep_s *ep, + struct usbdev_req_s *req); +static int lpc43_epstall(FAR struct usbdev_ep_s *ep, bool resume); + +static FAR struct usbdev_ep_s *lpc43_allocep(FAR struct usbdev_s *dev, + uint8_t epno, bool in, uint8_t eptype); +static void lpc43_freeep(FAR struct usbdev_s *dev, FAR struct usbdev_ep_s *ep); +static int lpc43_getframe(struct usbdev_s *dev); +static int lpc43_wakeup(struct usbdev_s *dev); +static int lpc43_selfpowered(struct usbdev_s *dev, bool selfpowered); +static int lpc43_pullup(struct usbdev_s *dev, bool enable); + +/******************************************************************************* + * Private Data + *******************************************************************************/ + +/* Since there is only a single USB interface, all status information can be + * be simply retained in a single global instance. + */ + +static struct lpc43_usbdev_s g_usbdev; + +static struct lpc43_dqh_s __attribute__((aligned(2048))) g_qh[LPC43_NPHYSENDPOINTS]; +static struct lpc43_dtd_s __attribute__((aligned(32))) g_td[LPC43_NPHYSENDPOINTS]; + +static const struct usbdev_epops_s g_epops = +{ + .configure = lpc43_epconfigure, + .disable = lpc43_epdisable, + .allocreq = lpc43_epallocreq, + .freereq = lpc43_epfreereq, +#ifdef CONFIG_USBDEV_DMA + .allocbuffer = lpc43_epallocbuffer, + .freebuffer = lpc43_epfreebuffer, +#endif + .submit = lpc43_epsubmit, + .cancel = lpc43_epcancel, + .stall = lpc43_epstall, +}; + +static const struct usbdev_ops_s g_devops = +{ + .allocep = lpc43_allocep, + .freeep = lpc43_freeep, + .getframe = lpc43_getframe, + .wakeup = lpc43_wakeup, + .selfpowered = lpc43_selfpowered, + .pullup = lpc43_pullup, +}; + +/******************************************************************************* + * Public Data + *******************************************************************************/ + +/******************************************************************************* + * Private Functions + *******************************************************************************/ + +/******************************************************************************* + * Name: lpc43_getreg + * + * Description: + * Get the contents of an LPC433x register + * + *******************************************************************************/ + +#if defined(CONFIG_LPC43_USBDEV_REGDEBUG) && defined(CONFIG_DEBUG) +static uint32_t lpc43_getreg(uint32_t addr) +{ + static uint32_t prevaddr = 0; + static uint32_t preval = 0; + static uint32_t count = 0; + + /* Read the value from the register */ + + uint32_t val = getreg32(addr); + + /* Is this the same value that we read from the same registe last time? Are + * we polling the register? If so, suppress some of the output. + */ + + if (addr == prevaddr && val == preval) + { + if (count == 0xffffffff || ++count > 3) + { + if (count == 4) + { + lldbg("...\n"); + } + return val; + } + } + + /* No this is a new address or value */ + + else + { + /* Did we print "..." for the previous value? */ + + if (count > 3) + { + /* Yes.. then show how many times the value repeated */ + + lldbg("[repeats %d more times]\n", count-3); + } + + /* Save the new address, value, and count */ + + prevaddr = addr; + preval = val; + count = 1; + } + + /* Show the register value read */ + + lldbg("%08x->%08x\n", addr, val); + return val; +} +#endif + +/******************************************************************************* + * Name: lpc43_putreg + * + * Description: + * Set the contents of an LPC433x register to a value + * + *******************************************************************************/ + +#if defined(CONFIG_LPC43_USBDEV_REGDEBUG) && defined(CONFIG_DEBUG) +static void lpc43_putreg(uint32_t val, uint32_t addr) +{ + /* Show the register value being written */ + + lldbg("%08x<-%08x\n", addr, val); + + /* Write the value */ + + putreg32(val, addr); +} +#endif + +/******************************************************************************* + * Name: lpc43_clrbits + * + * Description: + * Clear bits in a register + * + *******************************************************************************/ + +static inline void lpc43_clrbits(uint32_t mask, uint32_t addr) +{ + uint32_t reg = lpc43_getreg(addr); + reg &= ~mask; + lpc43_putreg(reg, addr); +} + +/******************************************************************************* + * Name: lpc43_setbits + * + * Description: + * Set bits in a register + * + *******************************************************************************/ + +static inline void lpc43_setbits(uint32_t mask, uint32_t addr) +{ + uint32_t reg = lpc43_getreg(addr); + reg |= mask; + lpc43_putreg(reg, addr); +} + +/******************************************************************************* + * Name: lpc43_chgbits + * + * Description: + * Change bits in a register + * + *******************************************************************************/ + +static inline void lpc43_chgbits(uint32_t mask, uint32_t val, uint32_t addr) +{ + uint32_t reg = lpc43_getreg(addr); + reg &= ~mask; + reg |= val; + lpc43_putreg(reg, addr); +} + +/******************************************************************************* + * Name: lpc43_rqdequeue + * + * Description: + * Remove a request from an endpoint request queue + * + *******************************************************************************/ + +static FAR struct lpc43_req_s *lpc43_rqdequeue(FAR struct lpc43_ep_s *privep) +{ + FAR struct lpc43_req_s *ret = privep->head; + + if (ret) + { + privep->head = ret->flink; + if (!privep->head) + { + privep->tail = NULL; + } + + ret->flink = NULL; + } + + return ret; +} + +/******************************************************************************* + * Name: lpc43_rqenqueue + * + * Description: + * Add a request from an endpoint request queue + * + *******************************************************************************/ + +static bool lpc43_rqenqueue(FAR struct lpc43_ep_s *privep, + FAR struct lpc43_req_s *req) +{ + bool is_empty = !privep->head; + + req->flink = NULL; + if (is_empty) + { + privep->head = req; + privep->tail = req; + } + else + { + privep->tail->flink = req; + privep->tail = req; + } + return is_empty; +} + +/******************************************************************************* + * Name: lpc43_writedtd + * + * Description: + * Initialise a DTD to transfer the data + * + *******************************************************************************/ + +static inline void lpc43_writedtd(struct lpc43_dtd_s *dtd, const uint8_t *data, uint32_t nbytes) +{ + dtd->nextdesc = DTD_NEXTDESC_INVALID; + dtd->config = DTD_CONFIG_LENGTH(nbytes) | DTD_CONFIG_IOC | DTD_CONFIG_ACTIVE; + dtd->buffer0 = ((uint32_t) data); + dtd->buffer1 = (((uint32_t) data) + 0x1000) & 0xfffff000; + dtd->buffer2 = (((uint32_t) data) + 0x2000) & 0xfffff000; + dtd->buffer3 = (((uint32_t) data) + 0x3000) & 0xfffff000; + dtd->buffer4 = (((uint32_t) data) + 0x4000) & 0xfffff000; + dtd->xfer_len = nbytes; +} + +/******************************************************************************* + * Name: lpc43_queuedtd + * + * Description: + * Add the DTD to the device list + * + *******************************************************************************/ + +static void lpc43_queuedtd(uint8_t epphy, struct lpc43_dtd_s *dtd) +{ + /* Queue the DTD onto the Endpoint */ + /* NOTE - this only works when no DTD is currently queued */ + + g_qh[epphy].overlay.nextdesc = (uint32_t) dtd; + g_qh[epphy].overlay.config &= ~(DTD_CONFIG_ACTIVE | DTD_CONFIG_HALTED); + + uint32_t bit = LPC43_ENDPTMASK(epphy); + + lpc43_setbits (bit, LPC43_USBDEV_ENDPTPRIME); + + while (lpc43_getreg (LPC43_USBDEV_ENDPTPRIME) & bit) + ; +} + +/******************************************************************************* + * Name: lpc43_ep0xfer + * + * Description: + * Schedule a short transfer for Endpoint 0 (IN or OUT) + * + *******************************************************************************/ + +static inline void lpc43_ep0xfer(uint8_t epphy, uint8_t *buf, uint32_t nbytes) +{ + struct lpc43_dtd_s *dtd = &g_td[epphy]; + + lpc43_writedtd(dtd, buf, nbytes); + + lpc43_queuedtd(epphy, dtd); +} + +/******************************************************************************* + * Name: lpc43_readsetup + * + * Description: + * Read a Setup packet from the DTD. + * + *******************************************************************************/ +static void lpc43_readsetup(uint8_t epphy, struct usb_ctrlreq_s *ctrl) +{ + struct lpc43_dqh_s *dqh = &g_qh[epphy]; + int i; + + do { + /* Set the trip wire */ + lpc43_setbits(USBDEV_USBCMD_SUTW, LPC43_USBDEV_USBCMD); + + /* copy the request... */ + for (i = 0; i < 8; i++) + ((uint8_t *) ctrl)[i] = ((uint8_t *) dqh->setup)[i]; + + } while (!(lpc43_getreg(LPC43_USBDEV_USBCMD) & USBDEV_USBCMD_SUTW)); + + /* Clear the trip wire */ + lpc43_clrbits(USBDEV_USBCMD_SUTW, LPC43_USBDEV_USBCMD); + + /* Clear the Setup Interrupt */ + lpc43_putreg (LPC43_ENDPTMASK(LPC43_EP0_OUT), LPC43_USBDEV_ENDPTSETUPSTAT); +} + +/******************************************************************************* + * Name: lpc43_set_address + * + * Description: + * Set the devices USB address + * + *******************************************************************************/ + +static inline void lpc43_set_address(struct lpc43_usbdev_s *priv, uint16_t address) +{ + priv->paddr = address; + priv->paddrset = address != 0; + + lpc43_chgbits(USBDEV_DEVICEADDR_MASK, priv->paddr << USBDEV_DEVICEADDR_SHIFT, + LPC43_USBDEV_DEVICEADDR); +} + +/******************************************************************************* + * Name: lpc43_flushep + * + * Description: + * Flush any primed descriptors from this ep + * + *******************************************************************************/ + +static void lpc43_flushep(struct lpc43_ep_s *privep) +{ + uint32_t mask = LPC43_ENDPTMASK(privep->epphy); + do + { + lpc43_putreg (mask, LPC43_USBDEV_ENDPTFLUSH); + while ((lpc43_getreg(LPC43_USBDEV_ENDPTFLUSH) & mask) != 0) + ; + } + while ((lpc43_getreg(LPC43_USBDEV_ENDPTSTATUS) & mask) != 0); +} + + +/******************************************************************************* + * Name: lpc43_progressep + * + * Description: + * Progress the Endpoint by priming the first request into the queue head + * + *******************************************************************************/ + +static int lpc43_progressep(struct lpc43_ep_s *privep) +{ + struct lpc43_dtd_s *dtd = &g_td[privep->epphy]; + struct lpc43_req_s *privreq; + + /* Check the request from the head of the endpoint request queue */ + + privreq = lpc43_rqpeek(privep); + if (!privreq) + { + usbtrace(TRACE_INTDECODE(LPC43_TRACEINTID_EPINQEMPTY), 0); + return OK; + } + + /* Ignore any attempt to send a zero length packet */ + + if (privreq->req.len == 0) + { + /* If the class driver is responding to a setup packet, then wait for the + * host to illicit thr response */ + + if (privep->epphy == LPC43_EP0_IN && privep->dev->ep0state == EP0STATE_SETUP_OUT) + lpc43_ep0state (privep->dev, EP0STATE_WAIT_NAK_IN); + else + { + if (LPC43_EPPHYIN(privep->epphy)) + usbtrace(TRACE_DEVERROR(LPC43_TRACEERR_EPINNULLPACKET), 0); + else + usbtrace(TRACE_DEVERROR(LPC43_TRACEERR_EPOUTNULLPACKET), 0); + } + + lpc43_reqcomplete(privep, lpc43_rqdequeue(privep), OK); + return OK; + } + + if (privep->epphy == LPC43_EP0_IN) + lpc43_ep0state (privep->dev, EP0STATE_DATA_IN); + else if (privep->epphy == LPC43_EP0_OUT) + lpc43_ep0state (privep->dev, EP0STATE_DATA_OUT); + + int bytesleft = privreq->req.len - privreq->req.xfrd; + + if (LPC43_EPPHYIN(privep->epphy)) + usbtrace(TRACE_WRITE(privep->epphy), privreq->req.xfrd); + else + usbtrace(TRACE_READ(privep->epphy), privreq->req.xfrd); + + /* Initialise the DTD to transfer the next chunk */ + + lpc43_writedtd (dtd, privreq->req.buf + privreq->req.xfrd, bytesleft); + + /* then queue onto the DQH */ + lpc43_queuedtd(privep->epphy, dtd); + + return OK; +} + +/******************************************************************************* + * Name: lpc43_abortrequest + * + * Description: + * Discard a request + * + *******************************************************************************/ + +static inline void lpc43_abortrequest(struct lpc43_ep_s *privep, + struct lpc43_req_s *privreq, + int16_t result) +{ + usbtrace(TRACE_DEVERROR(LPC43_TRACEERR_REQABORTED), (uint16_t)privep->epphy); + + /* Save the result in the request structure */ + + privreq->req.result = result; + + /* Callback to the request completion handler */ + + privreq->req.callback(&privep->ep, &privreq->req); +} + +/******************************************************************************* + * Name: lpc43_reqcomplete + * + * Description: + * Handle termination of the request at the head of the endpoint request queue. + * + *******************************************************************************/ + +static void lpc43_reqcomplete(struct lpc43_ep_s *privep, + struct lpc43_req_s *privreq, int16_t result) +{ + /* If endpoint 0, temporarily reflect the state of protocol stalled + * in the callback. + */ + + bool stalled = privep->stalled; + if (privep->epphy == LPC43_EP0_IN) + privep->stalled = privep->dev->stalled; + + /* Save the result in the request structure */ + + privreq->req.result = result; + + /* Callback to the request completion handler */ + + privreq->req.callback(&privep->ep, &privreq->req); + + /* Restore the stalled indication */ + + privep->stalled = stalled; +} + +/******************************************************************************* + * Name: lpc43_cancelrequests + * + * Description: + * Cancel all pending requests for an endpoint + * + *******************************************************************************/ + +static void lpc43_cancelrequests(struct lpc43_ep_s *privep, int16_t status) +{ + if (!lpc43_rqempty(privep)) + lpc43_flushep(privep); + + while (!lpc43_rqempty(privep)) + { + // FIXME: the entry at the head should be sync'd with the DTD + // FIXME: only report the error status if the transfer hasn't completed + usbtrace(TRACE_COMPLETE(privep->epphy), + (lpc43_rqpeek(privep))->req.xfrd); + lpc43_reqcomplete(privep, lpc43_rqdequeue(privep), status); + } +} + +/******************************************************************************* + * Name: lpc43_epfindbyaddr + * + * Description: + * Find the physical endpoint structure corresponding to a logic endpoint + * address + * + *******************************************************************************/ + +static struct lpc43_ep_s *lpc43_epfindbyaddr(struct lpc43_usbdev_s *priv, + uint16_t eplog) +{ + struct lpc43_ep_s *privep; + int i; + + /* Endpoint zero is a special case */ + + if (USB_EPNO(eplog) == 0) + { + return &priv->eplist[0]; + } + + /* Handle the remaining */ + + for (i = 1; i < LPC43_NPHYSENDPOINTS; i++) + { + privep = &priv->eplist[i]; + + /* Same logical endpoint number? (includes direction bit) */ + + if (eplog == privep->ep.eplog) + { + /* Return endpoint found */ + + return privep; + } + } + + /* Return endpoint not found */ + + return NULL; +} + +/******************************************************************************* + * Name: lpc43_dispatchrequest + * + * Description: + * Provide unhandled setup actions to the class driver. This is logically part + * of the USB interrupt handler. + * + *******************************************************************************/ + +static void lpc43_dispatchrequest(struct lpc43_usbdev_s *priv, + const struct usb_ctrlreq_s *ctrl) +{ + int ret = -EIO; + + usbtrace(TRACE_INTDECODE(LPC43_TRACEINTID_DISPATCH), 0); + if (priv->driver) + { + /* Forward to the control request to the class driver implementation */ + + ret = CLASS_SETUP(priv->driver, &priv->usbdev, ctrl, NULL, 0); + } + + if (ret < 0) + { + /* Stall on failure */ + + usbtrace(TRACE_DEVERROR(LPC43_TRACEERR_DISPATCHSTALL), 0); + priv->stalled = true; + } +} + +/******************************************************************************* + * Name: lpc43_ep0configure + * + * Description: + * Reset Usb engine + * + *******************************************************************************/ + +static void lpc43_ep0configure(struct lpc43_usbdev_s *priv) +{ + /* Enable ep0 IN and ep0 OUT */ + g_qh[LPC43_EP0_OUT].capability = (DQH_CAPABILITY_MAX_PACKET(CONFIG_USBDEV_EP0_MAXSIZE) | + DQH_CAPABILITY_IOS | + DQH_CAPABILITY_ZLT); + + g_qh[LPC43_EP0_IN ].capability = (DQH_CAPABILITY_MAX_PACKET(CONFIG_USBDEV_EP0_MAXSIZE) | + DQH_CAPABILITY_IOS | + DQH_CAPABILITY_ZLT); + + g_qh[LPC43_EP0_OUT].currdesc = DTD_NEXTDESC_INVALID; + g_qh[LPC43_EP0_IN ].currdesc = DTD_NEXTDESC_INVALID; + + /* Enable EP0 */ + lpc43_setbits (USBDEV_ENDPTCTRL0_RXE | USBDEV_ENDPTCTRL0_TXE, LPC43_USBDEV_ENDPTCTRL0); +} + +/******************************************************************************* + * Name: lpc43_usbreset + * + * Description: + * Reset Usb engine + * + *******************************************************************************/ + +static void lpc43_usbreset(struct lpc43_usbdev_s *priv) +{ + int epphy; + + /* Disable all endpoints */ + + lpc43_clrbits (USBDEV_ENDPTCTRL_RXE | USBDEV_ENDPTCTRL_TXE, LPC43_USBDEV_ENDPTCTRL0); + lpc43_clrbits (USBDEV_ENDPTCTRL_RXE | USBDEV_ENDPTCTRL_TXE, LPC43_USBDEV_ENDPTCTRL1); + lpc43_clrbits (USBDEV_ENDPTCTRL_RXE | USBDEV_ENDPTCTRL_TXE, LPC43_USBDEV_ENDPTCTRL2); + lpc43_clrbits (USBDEV_ENDPTCTRL_RXE | USBDEV_ENDPTCTRL_TXE, LPC43_USBDEV_ENDPTCTRL3); + + /* Clear all pending interrupts */ + + lpc43_putreg (lpc43_getreg(LPC43_USBDEV_ENDPTNAK), LPC43_USBDEV_ENDPTNAK); + lpc43_putreg (lpc43_getreg(LPC43_USBDEV_ENDPTSETUPSTAT), LPC43_USBDEV_ENDPTSETUPSTAT); + lpc43_putreg (lpc43_getreg(LPC43_USBDEV_ENDPTCOMPLETE), LPC43_USBDEV_ENDPTCOMPLETE); + + /* Wait for all prime operations to have completed and then flush all DTDs */ + while (lpc43_getreg (LPC43_USBDEV_ENDPTPRIME) != 0) + ; + lpc43_putreg (LPC43_ENDPTMASK_ALL, LPC43_USBDEV_ENDPTFLUSH); + while (lpc43_getreg (LPC43_USBDEV_ENDPTFLUSH)) + ; + + /* Reset endpoints */ + for (epphy = 0; epphy < LPC43_NPHYSENDPOINTS; epphy++) + { + struct lpc43_ep_s *privep = &priv->eplist[epphy]; + + lpc43_cancelrequests (privep, -ESHUTDOWN); + + /* Reset endpoint status */ + privep->stalled = false; + } + + /* Tell the class driver that we are disconnected. The class + * driver should then accept any new configurations. */ + + if (priv->driver) + CLASS_DISCONNECT(priv->driver, &priv->usbdev); + + /* Set the interrupt Threshold control interval to 0 */ + lpc43_chgbits(USBDEV_USBCMD_ITC_MASK, USBDEV_USBCMD_ITCIMME, LPC43_USBDEV_USBCMD); + + /* Zero out the Endpoint queue heads */ + memset ((void *) g_qh, 0, sizeof (g_qh)); + memset ((void *) g_td, 0, sizeof (g_td)); + + /* Set USB address to 0 */ + lpc43_set_address (priv, 0); + + /* Initialise the Enpoint List Address */ + lpc43_putreg ((uint32_t)g_qh, LPC43_USBDEV_ENDPOINTLIST); + + /* EndPoint 0 initialization */ + lpc43_ep0configure(priv); + + /* Enable Device interrupts */ + lpc43_putreg(USB_FRAME_INT | USB_ERROR_INT | + USBDEV_USBINTR_NAKE | USBDEV_USBINTR_SLE | USBDEV_USBINTR_URE | USBDEV_USBINTR_PCE | USBDEV_USBINTR_UE, + LPC43_USBDEV_USBINTR); +} + +/******************************************************************************* + * Name: lpc43_setstate + * + * Description: + * Sets the EP0 state and manages the NAK interrupts + * + *******************************************************************************/ + +static inline void lpc43_ep0state(struct lpc43_usbdev_s *priv, uint16_t state) +{ + priv->ep0state = state; + + switch (state) + { + case EP0STATE_WAIT_NAK_IN: + lpc43_putreg (LPC43_ENDPTMASK(LPC43_EP0_IN), LPC43_USBDEV_ENDPTNAKEN); + break; + case EP0STATE_WAIT_NAK_OUT: + lpc43_putreg (LPC43_ENDPTMASK(LPC43_EP0_OUT), LPC43_USBDEV_ENDPTNAKEN); + break; + default: + lpc43_putreg(0, LPC43_USBDEV_ENDPTNAKEN); + break; + } +} + +/******************************************************************************* + * Name: lpc43_ep0setup + * + * Description: + * USB Ctrl EP Setup Event. This is logically part of the USB interrupt + * handler. This event occurs when a setup packet is receive on EP0 OUT. + * + *******************************************************************************/ + +static inline void lpc43_ep0setup(struct lpc43_usbdev_s *priv) +{ + struct lpc43_ep_s *privep; + struct usb_ctrlreq_s ctrl; + uint16_t value; + uint16_t index; + uint16_t len; + + /* Terminate any pending requests - since all DTDs will have been retired + * because of the setup packet */ + + lpc43_cancelrequests(&priv->eplist[LPC43_EP0_OUT], -EPROTO); + lpc43_cancelrequests(&priv->eplist[LPC43_EP0_IN], -EPROTO); + + /* Assume NOT stalled */ + + priv->eplist[LPC43_EP0_OUT].stalled = false; + priv->eplist[LPC43_EP0_IN].stalled = false; + priv->stalled = false; + + /* Read EP0 setup data */ + lpc43_readsetup(LPC43_EP0_OUT, &ctrl); + + /* Starting a control request - update state */ + lpc43_ep0state (priv, (ctrl.type & USB_REQ_DIR_IN) ? EP0STATE_SETUP_IN : EP0STATE_SETUP_OUT); + + /* And extract the little-endian 16-bit values to host order */ + value = GETUINT16(ctrl.value); + index = GETUINT16(ctrl.index); + len = GETUINT16(ctrl.len); + + ullvdbg("type=%02x req=%02x value=%04x index=%04x len=%04x\n", + ctrl.type, ctrl.req, value, index, len); + + /* Dispatch any non-standard requests */ + if ((ctrl.type & USB_REQ_TYPE_MASK) != USB_REQ_TYPE_STANDARD) + lpc43_dispatchrequest(priv, &ctrl); + else + { + /* Handle standard request. Pick off the things of interest to the USB + * device controller driver; pass what is left to the class driver */ + switch (ctrl.req) + { + case USB_REQ_GETSTATUS: + { + /* type: device-to-host; recipient = device, interface, endpoint + * value: 0 + * index: zero interface endpoint + * len: 2; data = status + */ + + usbtrace(TRACE_INTDECODE(LPC43_TRACEINTID_GETSTATUS), 0); + if (!priv->paddrset || len != 2 || + (ctrl.type & USB_REQ_DIR_IN) == 0 || value != 0) + { + priv->stalled = true; + } + else + { + switch (ctrl.type & USB_REQ_RECIPIENT_MASK) + { + case USB_REQ_RECIPIENT_ENDPOINT: + { + usbtrace(TRACE_INTDECODE(LPC43_TRACEINTID_EPGETSTATUS), 0); + privep = lpc43_epfindbyaddr(priv, index); + if (!privep) + { + usbtrace(TRACE_DEVERROR(LPC43_TRACEERR_BADEPGETSTATUS), 0); + priv->stalled = true; + } + else + { + if (privep->stalled) + priv->ep0buf[0] = 1; /* Stalled */ + else + priv->ep0buf[0] = 0; /* Not stalled */ + priv->ep0buf[1] = 0; + + lpc43_ep0xfer (LPC43_EP0_IN, priv->ep0buf, 2); + lpc43_ep0state (priv, EP0STATE_SHORTWRITE); + } + } + break; + + case USB_REQ_RECIPIENT_DEVICE: + { + if (index == 0) + { + usbtrace(TRACE_INTDECODE(LPC43_TRACEINTID_DEVGETSTATUS), 0); + + /* Features: Remote Wakeup=YES; selfpowered=? */ + + priv->ep0buf[0] = (priv->selfpowered << USB_FEATURE_SELFPOWERED) | + (1 << USB_FEATURE_REMOTEWAKEUP); + priv->ep0buf[1] = 0; + + lpc43_ep0xfer(LPC43_EP0_IN, priv->ep0buf, 2); + lpc43_ep0state (priv, EP0STATE_SHORTWRITE); + } + else + { + usbtrace(TRACE_DEVERROR(LPC43_TRACEERR_BADDEVGETSTATUS), 0); + priv->stalled = true; + } + } + break; + + case USB_REQ_RECIPIENT_INTERFACE: + { + usbtrace(TRACE_INTDECODE(LPC43_TRACEINTID_IFGETSTATUS), 0); + priv->ep0buf[0] = 0; + priv->ep0buf[1] = 0; + + lpc43_ep0xfer(LPC43_EP0_IN, priv->ep0buf, 2); + lpc43_ep0state (priv, EP0STATE_SHORTWRITE); + } + break; + + default: + { + usbtrace(TRACE_DEVERROR(LPC43_TRACEERR_BADGETSTATUS), 0); + priv->stalled = true; + } + break; + } + } + } + break; + + case USB_REQ_CLEARFEATURE: + { + /* type: host-to-device; recipient = device, interface or endpoint + * value: feature selector + * index: zero interface endpoint; + * len: zero, data = none + */ + + usbtrace(TRACE_INTDECODE(LPC43_TRACEINTID_CLEARFEATURE), 0); + if ((ctrl.type & USB_REQ_RECIPIENT_MASK) != USB_REQ_RECIPIENT_ENDPOINT) + { + lpc43_dispatchrequest(priv, &ctrl); + } + else if (priv->paddrset != 0 && value == USB_FEATURE_ENDPOINTHALT && len == 0 && + (privep = lpc43_epfindbyaddr(priv, index)) != NULL) + { + lpc43_epstall(&privep->ep, true); + lpc43_ep0state (priv, EP0STATE_WAIT_NAK_IN); + } + else + { + usbtrace(TRACE_DEVERROR(LPC43_TRACEERR_BADCLEARFEATURE), 0); + priv->stalled = true; + } + } + break; + + case USB_REQ_SETFEATURE: + { + /* type: host-to-device; recipient = device, interface, endpoint + * value: feature selector + * index: zero interface endpoint; + * len: 0; data = none + */ + + usbtrace(TRACE_INTDECODE(LPC43_TRACEINTID_SETFEATURE), 0); + if (((ctrl.type & USB_REQ_RECIPIENT_MASK) == USB_REQ_RECIPIENT_DEVICE) && + value == USB_FEATURE_TESTMODE) + { + ullvdbg("test mode: %d\n", index); + } + else if ((ctrl.type & USB_REQ_RECIPIENT_MASK) != USB_REQ_RECIPIENT_ENDPOINT) + { + lpc43_dispatchrequest(priv, &ctrl); + } + else if (priv->paddrset != 0 && value == USB_FEATURE_ENDPOINTHALT && len == 0 && + (privep = lpc43_epfindbyaddr(priv, index)) != NULL) + { + lpc43_epstall(&privep->ep, false); + lpc43_ep0state (priv, EP0STATE_WAIT_NAK_IN); + } + else + { + usbtrace(TRACE_DEVERROR(LPC43_TRACEERR_BADSETFEATURE), 0); + priv->stalled = true; + } + } + break; + + case USB_REQ_SETADDRESS: + { + /* type: host-to-device; recipient = device + * value: device address + * index: 0 + * len: 0; data = none + */ + usbtrace(TRACE_INTDECODE(LPC43_TRACEINTID_EP0SETUPSETADDRESS), value); + if ((ctrl.type & USB_REQ_RECIPIENT_MASK) == USB_REQ_RECIPIENT_DEVICE && + index == 0 && len == 0 && value < 128) + { + /* Save the address. We cannot actually change to the next address until + * the completion of the status phase. */ + + priv->paddr = ctrl.value[0]; + priv->paddrset = false; + lpc43_ep0state (priv, EP0STATE_WAIT_NAK_IN); + } + else + { + usbtrace(TRACE_DEVERROR(LPC43_TRACEERR_BADSETADDRESS), 0); + priv->stalled = true; + } + } + break; + + case USB_REQ_GETDESCRIPTOR: + /* type: device-to-host; recipient = device + * value: descriptor type and index + * index: 0 or language ID; + * len: descriptor len; data = descriptor + */ + case USB_REQ_SETDESCRIPTOR: + /* type: host-to-device; recipient = device + * value: descriptor type and index + * index: 0 or language ID; + * len: descriptor len; data = descriptor + */ + { + usbtrace(TRACE_INTDECODE(LPC43_TRACEINTID_GETSETDESC), 0); + if ((ctrl.type & USB_REQ_RECIPIENT_MASK) == USB_REQ_RECIPIENT_DEVICE) + { + lpc43_dispatchrequest(priv, &ctrl); + } + else + { + usbtrace(TRACE_DEVERROR(LPC43_TRACEERR_BADGETSETDESC), 0); + priv->stalled = true; + } + } + break; + + case USB_REQ_GETCONFIGURATION: + /* type: device-to-host; recipient = device + * value: 0; + * index: 0; + * len: 1; data = configuration value + */ + { + usbtrace(TRACE_INTDECODE(LPC43_TRACEINTID_GETCONFIG), 0); + if (priv->paddrset && (ctrl.type & USB_REQ_RECIPIENT_MASK) == USB_REQ_RECIPIENT_DEVICE && + value == 0 && index == 0 && len == 1) + { + lpc43_dispatchrequest(priv, &ctrl); + } + else + { + usbtrace(TRACE_DEVERROR(LPC43_TRACEERR_BADGETCONFIG), 0); + priv->stalled = true; + } + } + break; + + case USB_REQ_SETCONFIGURATION: + /* type: host-to-device; recipient = device + * value: configuration value + * index: 0; + * len: 0; data = none + */ + { + usbtrace(TRACE_INTDECODE(LPC43_TRACEINTID_SETCONFIG), 0); + if ((ctrl.type & USB_REQ_RECIPIENT_MASK) == USB_REQ_RECIPIENT_DEVICE && + index == 0 && len == 0) + { + lpc43_dispatchrequest(priv, &ctrl); + } + else + { + usbtrace(TRACE_DEVERROR(LPC43_TRACEERR_BADSETCONFIG), 0); + priv->stalled = true; + } + } + break; + + case USB_REQ_GETINTERFACE: + /* type: device-to-host; recipient = interface + * value: 0 + * index: interface; + * len: 1; data = alt interface + */ + case USB_REQ_SETINTERFACE: + /* type: host-to-device; recipient = interface + * value: alternate setting + * index: interface; + * len: 0; data = none + */ + { + usbtrace(TRACE_INTDECODE(LPC43_TRACEINTID_GETSETIF), 0); + lpc43_dispatchrequest(priv, &ctrl); + } + break; + + case USB_REQ_SYNCHFRAME: + /* type: device-to-host; recipient = endpoint + * value: 0 + * index: endpoint; + * len: 2; data = frame number + */ + { + usbtrace(TRACE_INTDECODE(LPC43_TRACEINTID_SYNCHFRAME), 0); + } + break; + + default: + { + usbtrace(TRACE_DEVERROR(LPC43_TRACEERR_INVALIDCTRLREQ), 0); + priv->stalled = true; + } + break; + } + } + + if (priv->stalled) + { + usbtrace(TRACE_DEVERROR(LPC43_TRACEERR_EP0SETUPSTALLED), priv->ep0state); + lpc43_epstall(&priv->eplist[LPC43_EP0_IN].ep, false); + lpc43_epstall(&priv->eplist[LPC43_EP0_OUT].ep, false); + } +} + +/******************************************************************************* + * Name: lpc43_ep0complete + * + * Description: + * Transfer complete handler for Endpoint 0 + * + *******************************************************************************/ + +static void lpc43_ep0complete(struct lpc43_usbdev_s *priv, uint8_t epphy) +{ + struct lpc43_ep_s *privep = &priv->eplist[epphy]; + + usbtrace(TRACE_INTDECODE(LPC43_TRACEINTID_EP0COMPLETE), (uint16_t)priv->ep0state); + + switch (priv->ep0state) + { + case EP0STATE_DATA_IN: + if (lpc43_rqempty(privep)) + return; + + if (lpc43_epcomplete (priv, epphy)) + lpc43_ep0state (priv, EP0STATE_WAIT_NAK_OUT); + break; + + case EP0STATE_DATA_OUT: + if (lpc43_rqempty(privep)) + return; + + if (lpc43_epcomplete (priv, epphy)) + lpc43_ep0state (priv, EP0STATE_WAIT_NAK_IN); + break; + + case EP0STATE_SHORTWRITE: + lpc43_ep0state (priv, EP0STATE_WAIT_NAK_OUT); + break; + + case EP0STATE_WAIT_STATUS_IN: + lpc43_ep0state (priv, EP0STATE_IDLE); + + /* If we've received a SETADDRESS packet, then we set the address + * now that the status phase has completed */ + if (! priv->paddrset && priv->paddr != 0) + { + usbtrace(TRACE_INTDECODE(LPC43_TRACEINTID_EP0INSETADDRESS), (uint16_t)priv->paddr); + lpc43_set_address (priv, priv->paddr); + } + break; + + case EP0STATE_WAIT_STATUS_OUT: + lpc43_ep0state (priv, EP0STATE_IDLE); + break; + + default: +#ifdef CONFIG_DEBUG + DEBUGASSERT(priv->ep0state != EP0STATE_DATA_IN && + priv->ep0state != EP0STATE_DATA_OUT && + priv->ep0state != EP0STATE_SHORTWRITE && + priv->ep0state != EP0STATE_WAIT_STATUS_IN && + priv->ep0state != EP0STATE_WAIT_STATUS_OUT); +#endif + priv->stalled = true; + break; + } + + if (priv->stalled) + { + usbtrace(TRACE_DEVERROR(LPC43_TRACEERR_EP0SETUPSTALLED), priv->ep0state); + lpc43_epstall(&priv->eplist[LPC43_EP0_IN].ep, false); + lpc43_epstall(&priv->eplist[LPC43_EP0_OUT].ep, false); + } +} + +/******************************************************************************* + * Name: lpc43_ep0nak + * + * Description: + * Handle a NAK interrupt on EP0 + * + *******************************************************************************/ + +static void lpc43_ep0nak(struct lpc43_usbdev_s *priv, uint8_t epphy) +{ + usbtrace(TRACE_INTDECODE(LPC43_TRACEINTID_EP0NAK), (uint16_t)priv->ep0state); + + switch (priv->ep0state) + { + case EP0STATE_WAIT_NAK_IN: + lpc43_ep0xfer (LPC43_EP0_IN, NULL, 0); + lpc43_ep0state (priv, EP0STATE_WAIT_STATUS_IN); + break; + case EP0STATE_WAIT_NAK_OUT: + lpc43_ep0xfer (LPC43_EP0_OUT, NULL, 0); + lpc43_ep0state (priv, EP0STATE_WAIT_STATUS_OUT); + break; + default: +#ifdef CONFIG_DEBUG + DEBUGASSERT(priv->ep0state != EP0STATE_WAIT_NAK_IN && + priv->ep0state != EP0STATE_WAIT_NAK_OUT); +#endif + priv->stalled = true; + break; + } + + if (priv->stalled) + { + usbtrace(TRACE_DEVERROR(LPC43_TRACEERR_EP0SETUPSTALLED), priv->ep0state); + lpc43_epstall(&priv->eplist[LPC43_EP0_IN].ep, false); + lpc43_epstall(&priv->eplist[LPC43_EP0_OUT].ep, false); + } +} + +/******************************************************************************* + * Name: lpc43_epcomplete + * + * Description: + * Transfer complete handler for Endpoints other than 0 + * returns whether the request at the head has completed + * + *******************************************************************************/ + +bool lpc43_epcomplete(struct lpc43_usbdev_s *priv, uint8_t epphy) +{ + struct lpc43_ep_s *privep = &priv->eplist[epphy]; + struct lpc43_req_s *privreq = privep->head; + struct lpc43_dtd_s *dtd = &g_td[epphy]; + + if (privreq == NULL) /* This shouldn't really happen */ + { + if (LPC43_EPPHYOUT(privep->epphy)) + usbtrace(TRACE_INTDECODE(LPC43_TRACEINTID_EPINQEMPTY), 0); + else + usbtrace(TRACE_INTDECODE(LPC43_TRACEINTID_EPOUTQEMPTY), 0); + return true; + } + + int xfrd = dtd->xfer_len - (dtd->config >> 16); + + privreq->req.xfrd += xfrd; + + bool complete = true; + if (LPC43_EPPHYOUT(privep->epphy)) + { + /* read(OUT) completes when request filled, or a short transfer is received */ + + usbtrace(TRACE_INTDECODE(LPC43_TRACEINTID_EPIN), complete); + } + else + { + /* write(IN) completes when request finished, unless we need to terminate with a ZLP */ + + bool need_zlp = (xfrd == privep->ep.maxpacket) && ((privreq->req.flags & USBDEV_REQFLAGS_NULLPKT) != 0); + + complete = (privreq->req.xfrd >= privreq->req.len && !need_zlp); + + usbtrace(TRACE_INTDECODE(LPC43_TRACEINTID_EPOUT), complete); + } + + /* If the transfer is complete, then dequeue and progress any further queued requests */ + + if (complete) + { + privreq = lpc43_rqdequeue (privep); + } + + if (!lpc43_rqempty(privep)) + { + lpc43_progressep(privep); + } + + /* Now it's safe to call the completion callback as it may well submit a new request */ + + if (complete) + { + usbtrace(TRACE_COMPLETE(privep->epphy), privreq->req.xfrd); + lpc43_reqcomplete(privep, privreq, OK); + } + + return complete; +} + + +/******************************************************************************* + * Name: lpc43_usbinterrupt + * + * Description: + * USB interrupt handler + * + *******************************************************************************/ + +static int lpc43_usbinterrupt(int irq, FAR void *context) +{ + struct lpc43_usbdev_s *priv = &g_usbdev; + uint32_t disr, portsc1, n; + + usbtrace(TRACE_INTENTRY(LPC43_TRACEINTID_USB), 0); + + /* Read the interrupts and then clear them */ + disr = lpc43_getreg(LPC43_USBDEV_USBSTS); + lpc43_putreg(disr, LPC43_USBDEV_USBSTS); + + if (disr & USBDEV_USBSTS_URI) + { + usbtrace(TRACE_INTDECODE(LPC43_TRACEINTID_DEVRESET),0); + + lpc43_usbreset(priv); + + usbtrace(TRACE_INTEXIT(LPC43_TRACEINTID_USB), 0); + return OK; + } + + if (disr & USBDEV_USBSTS_SLI) + { + // FIXME: what do we need to do here... + usbtrace(TRACE_INTDECODE(LPC43_TRACEINTID_SUSPENDCHG),0); + } + + if (disr & USBDEV_USBSTS_PCI) + { + portsc1 = lpc43_getreg(LPC43_USBDEV_PORTSC1); + + if (portsc1 & USBDEV_PRTSC1_HSP) + priv->usbdev.speed = USB_SPEED_HIGH; + else + priv->usbdev.speed = USB_SPEED_FULL; + + if (portsc1 & USBDEV_PRTSC1_FPR) + { + /* FIXME: this occurs because of a J-to-K transition detected + * while the port is in SUSPEND state - presumambly this + * is where the host is resuming the device? + * + * - but do we need to "ack" the interrupt + */ + } + } + +#ifdef CONFIG_LPC43_USBDEV_FRAME_INTERRUPT + if (disr & USBDEV_USBSTT_SRI) + { + usbtrace(TRACE_INTDECODE(LPC43_TRACEINTID_FRAME), 0); + + priv->sof = (int)lpc43_getreg(LPC43_USBDEV_FRINDEX_OFFSET); + } +#endif + + if (disr & USBDEV_USBSTS_UEI) + { + /* FIXME: these occur when a transfer results in an error condition + * it is set alongside USBINT if the DTD also had its IOC + * bit set. */ + } + + if (disr & USBDEV_USBSTS_UI) + { + /* Handle completion interrupts */ + uint32_t mask = lpc43_getreg (LPC43_USBDEV_ENDPTCOMPLETE); + + if (mask) + { + /* Clear any NAK interrupt and completion interrupts */ + lpc43_putreg (mask, LPC43_USBDEV_ENDPTNAK); + lpc43_putreg (mask, LPC43_USBDEV_ENDPTCOMPLETE); + + if (mask & LPC43_ENDPTMASK(0)) + lpc43_ep0complete(priv, 0); + if (mask & LPC43_ENDPTMASK(1)) + lpc43_ep0complete(priv, 1); + + for (n = 1; n < LPC43_NLOGENDPOINTS; n++) + { + if (mask & LPC43_ENDPTMASK((n<<1))) + lpc43_epcomplete (priv, (n<<1)); + if (mask & LPC43_ENDPTMASK((n<<1)+1)) + lpc43_epcomplete(priv, (n<<1)+1); + } + } + + /* Handle setup interrupts */ + uint32_t setupstat = lpc43_getreg(LPC43_USBDEV_ENDPTSETUPSTAT); + if (setupstat) + { + /* Clear the endpoint complete CTRL OUT and IN when a Setup is received */ + lpc43_putreg(LPC43_ENDPTMASK(LPC43_EP0_IN) | LPC43_ENDPTMASK(LPC43_EP0_OUT), + LPC43_USBDEV_ENDPTCOMPLETE); + + if (setupstat & LPC43_ENDPTMASK(LPC43_EP0_OUT)) + { + usbtrace(TRACE_INTDECODE(LPC43_TRACEINTID_EP0SETUP), setupstat); + lpc43_ep0setup(priv); + } + } + } + + if (disr & USBDEV_USBSTS_NAKI) + { + uint32_t pending = lpc43_getreg(LPC43_USBDEV_ENDPTNAK) & lpc43_getreg(LPC43_USBDEV_ENDPTNAKEN); + if (pending) + { + /* We shouldn't see NAK interrupts except on Endpoint 0 */ + if (pending & LPC43_ENDPTMASK(0)) + lpc43_ep0nak(priv, 0); + if (pending & LPC43_ENDPTMASK(1)) + lpc43_ep0nak(priv, 1); + } + + /* Clear the interrupts */ + lpc43_putreg(pending, LPC43_USBDEV_ENDPTNAK); + } + + usbtrace(TRACE_INTEXIT(LPC43_TRACEINTID_USB), 0); + return OK; +} + +/******************************************************************************* + * Endpoint operations + *******************************************************************************/ + +/******************************************************************************* + * Name: lpc43_epconfigure + * + * Description: + * Configure endpoint, making it usable + * + * Input Parameters: + * ep - the struct usbdev_ep_s instance obtained from allocep() + * desc - A struct usb_epdesc_s instance describing the endpoint + * last - true if this this last endpoint to be configured. Some hardware + * needs to take special action when all of the endpoints have been + * configured. + * + *******************************************************************************/ + +static int lpc43_epconfigure(FAR struct usbdev_ep_s *ep, + FAR const struct usb_epdesc_s *desc, + bool last) +{ + FAR struct lpc43_ep_s *privep = (FAR struct lpc43_ep_s *)ep; + + usbtrace(TRACE_EPCONFIGURE, privep->epphy); + DEBUGASSERT(desc->addr == ep->eplog); + + /* Initialise EP capabilities */ + + uint16_t maxsize = GETUINT16(desc->mxpacketsize); + if ((desc->attr & USB_EP_ATTR_XFERTYPE_MASK) == USB_EP_ATTR_XFER_ISOC) + { + g_qh[privep->epphy].capability = (DQH_CAPABILITY_MAX_PACKET(maxsize) | + DQH_CAPABILITY_IOS | + DQH_CAPABILITY_ZLT); + } + else + { + g_qh[privep->epphy].capability = (DQH_CAPABILITY_MAX_PACKET(maxsize) | + DQH_CAPABILITY_ZLT); + } + + /* Setup Endpoint Control Register */ + + if (LPC43_EPPHYIN(privep->epphy)) + { + /* Reset the data toggles */ + uint32_t cfg = USBDEV_ENDPTCTRL_TXR; + + /* Set the endpoint type */ + switch (desc->attr & USB_EP_ATTR_XFERTYPE_MASK) + { + case USB_EP_ATTR_XFER_CONTROL: cfg |= USBDEV_ENDPTCTRL_TXT_CTRL; break; + case USB_EP_ATTR_XFER_ISOC: cfg |= USBDEV_ENDPTCTRL_TXT_ISOC; break; + case USB_EP_ATTR_XFER_BULK: cfg |= USBDEV_ENDPTCTRL_TXT_BULK; break; + case USB_EP_ATTR_XFER_INT: cfg |= USBDEV_ENDPTCTRL_TXT_INTR; break; + } + lpc43_chgbits (0xFFFF0000, cfg, LPC43_USBDEV_ENDPTCTRL(privep->epphy)); + } + else + { + /* Reset the data toggles */ + uint32_t cfg = USBDEV_ENDPTCTRL_RXR; + + /* Set the endpoint type */ + switch (desc->attr & USB_EP_ATTR_XFERTYPE_MASK) + { + case USB_EP_ATTR_XFER_CONTROL: cfg |= USBDEV_ENDPTCTRL_RXT_CTRL; break; + case USB_EP_ATTR_XFER_ISOC: cfg |= USBDEV_ENDPTCTRL_RXT_ISOC; break; + case USB_EP_ATTR_XFER_BULK: cfg |= USBDEV_ENDPTCTRL_RXT_BULK; break; + } + lpc43_chgbits (0x0000FFFF, cfg, LPC43_USBDEV_ENDPTCTRL(privep->epphy)); + } + + /* Reset endpoint status */ + privep->stalled = false; + + /* Enable the endpoint */ + if (LPC43_EPPHYIN(privep->epphy)) + lpc43_setbits (USBDEV_ENDPTCTRL_TXE, LPC43_USBDEV_ENDPTCTRL(privep->epphy)); + else + lpc43_setbits (USBDEV_ENDPTCTRL_RXE, LPC43_USBDEV_ENDPTCTRL(privep->epphy)); + + return OK; +} + +/******************************************************************************* + * Name: lpc43_epdisable + * + * Description: + * The endpoint will no longer be used + * + *******************************************************************************/ + +static int lpc43_epdisable(FAR struct usbdev_ep_s *ep) +{ + FAR struct lpc43_ep_s *privep = (FAR struct lpc43_ep_s *)ep; + irqstate_t flags; + +#ifdef CONFIG_DEBUG + if (!ep) + { + usbtrace(TRACE_DEVERROR(LPC43_TRACEERR_INVALIDPARMS), 0); + return -EINVAL; + } +#endif + usbtrace(TRACE_EPDISABLE, privep->epphy); + + flags = irqsave(); + + /* Disable Endpoint */ + if (LPC43_EPPHYIN(privep->epphy)) + lpc43_clrbits (USBDEV_ENDPTCTRL_TXE, LPC43_USBDEV_ENDPTCTRL(privep->epphy)); + else + lpc43_clrbits (USBDEV_ENDPTCTRL_RXE, LPC43_USBDEV_ENDPTCTRL(privep->epphy)); + + privep->stalled = true; + + /* Cancel any ongoing activity */ + lpc43_cancelrequests(privep, -ESHUTDOWN); + + irqrestore(flags); + return OK; +} + +/******************************************************************************* + * Name: lpc43_epallocreq + * + * Description: + * Allocate an I/O request + * + *******************************************************************************/ + +static FAR struct usbdev_req_s *lpc43_epallocreq(FAR struct usbdev_ep_s *ep) +{ + FAR struct lpc43_req_s *privreq; + +#ifdef CONFIG_DEBUG + if (!ep) + { + usbtrace(TRACE_DEVERROR(LPC43_TRACEERR_INVALIDPARMS), 0); + return NULL; + } +#endif + usbtrace(TRACE_EPALLOCREQ, ((FAR struct lpc43_ep_s *)ep)->epphy); + + privreq = (FAR struct lpc43_req_s *)malloc(sizeof(struct lpc43_req_s)); + if (!privreq) + { + usbtrace(TRACE_DEVERROR(LPC43_TRACEERR_ALLOCFAIL), 0); + return NULL; + } + + memset(privreq, 0, sizeof(struct lpc43_req_s)); + return &privreq->req; +} + +/******************************************************************************* + * Name: lpc43_epfreereq + * + * Description: + * Free an I/O request + * + *******************************************************************************/ + +static void lpc43_epfreereq(FAR struct usbdev_ep_s *ep, FAR struct usbdev_req_s *req) +{ + FAR struct lpc43_req_s *privreq = (FAR struct lpc43_req_s *)req; + +#ifdef CONFIG_DEBUG + if (!ep || !req) + { + usbtrace(TRACE_DEVERROR(LPC43_TRACEERR_INVALIDPARMS), 0); + return; + } +#endif + + usbtrace(TRACE_EPFREEREQ, ((FAR struct lpc43_ep_s *)ep)->epphy); + free(privreq); +} + +/******************************************************************************* + * Name: lpc43_epallocbuffer + * + * Description: + * Allocate an I/O buffer + * + *******************************************************************************/ + +#ifdef CONFIG_USBDEV_DMA +static void *lpc43_epallocbuffer(FAR struct usbdev_ep_s *ep, unsigned bytes) +{ + usbtrace(TRACE_EPALLOCBUFFER, privep->epphy); + +#ifdef CONFIG_USBDEV_DMAMEMORY + return usbdev_dma_alloc(bytes); +#else + return malloc(bytes); +#endif +} +#endif + +/******************************************************************************* + * Name: lpc43_epfreebuffer + * + * Description: + * Free an I/O buffer + * + *******************************************************************************/ + +#ifdef CONFIG_USBDEV_DMA +static void lpc43_epfreebuffer(FAR struct usbdev_ep_s *ep, FAR void *buf) +{ + usbtrace(TRACE_EPFREEBUFFER, privep->epphy); + +#ifdef CONFIG_USBDEV_DMAMEMORY + usbdev_dma_free(buf); +#else + free(buf); +#endif +} +#endif + +/******************************************************************************* + * Name: lpc43_epsubmit + * + * Description: + * Submit an I/O request to the endpoint + * + *******************************************************************************/ + +static int lpc43_epsubmit(FAR struct usbdev_ep_s *ep, FAR struct usbdev_req_s *req) +{ + FAR struct lpc43_req_s *privreq = (FAR struct lpc43_req_s *)req; + FAR struct lpc43_ep_s *privep = (FAR struct lpc43_ep_s *)ep; + FAR struct lpc43_usbdev_s *priv; + irqstate_t flags; + int ret = OK; + +#ifdef CONFIG_DEBUG + if (!req || !req->callback || !req->buf || !ep) + { + usbtrace(TRACE_DEVERROR(LPC43_TRACEERR_INVALIDPARMS), 0); + ullvdbg("req=%p callback=%p buf=%p ep=%p\n", req, req->callback, req->buf, ep); + return -EINVAL; + } +#endif + + usbtrace(TRACE_EPSUBMIT, privep->epphy); + priv = privep->dev; + + if (!priv->driver || priv->usbdev.speed == USB_SPEED_UNKNOWN) + { + usbtrace(TRACE_DEVERROR(LPC43_TRACEERR_NOTCONFIGURED), priv->usbdev.speed); + return -ESHUTDOWN; + } + + /* Handle the request from the class driver */ + + req->result = -EINPROGRESS; + req->xfrd = 0; + + /* Disable Interrupts */ + + flags = irqsave(); + + /* If we are stalled, then drop all requests on the floor */ + + if (privep->stalled) + { + ret = -EBUSY; + } + else + { + /* Add the new request to the request queue for the endpoint */ + + if (LPC43_EPPHYIN(privep->epphy)) + usbtrace(TRACE_INREQQUEUED(privep->epphy), privreq->req.len); + else + usbtrace(TRACE_OUTREQQUEUED(privep->epphy), privreq->req.len); + + if (lpc43_rqenqueue(privep, privreq)) + { + lpc43_progressep(privep); + } + } + + irqrestore(flags); + return ret; +} + +/******************************************************************************* + * Name: lpc43_epcancel + * + * Description: + * Cancel an I/O request previously sent to an endpoint + * + *******************************************************************************/ + +static int lpc43_epcancel(FAR struct usbdev_ep_s *ep, FAR struct usbdev_req_s *req) +{ + FAR struct lpc43_ep_s *privep = (FAR struct lpc43_ep_s *)ep; + FAR struct lpc43_usbdev_s *priv; + irqstate_t flags; + +#ifdef CONFIG_DEBUG + if (!ep || !req) + { + usbtrace(TRACE_DEVERROR(LPC43_TRACEERR_INVALIDPARMS), 0); + return -EINVAL; + } +#endif + + usbtrace(TRACE_EPCANCEL, privep->epphy); + priv = privep->dev; + + flags = irqsave(); + + /* FIXME: if the request is the first, then we need to flush the EP + * otherwise just remove it from the list + * + * but ... all other implementations cancel all requests ... + */ + + lpc43_cancelrequests(privep, -ESHUTDOWN); + irqrestore(flags); + return OK; +} + +/******************************************************************************* + * Name: lpc43_epstall + * + * Description: + * Stall or resume and endpoint + * + *******************************************************************************/ + +static int lpc43_epstall(FAR struct usbdev_ep_s *ep, bool resume) +{ + FAR struct lpc43_ep_s *privep = (FAR struct lpc43_ep_s *)ep; + irqstate_t flags; + + /* STALL or RESUME the endpoint */ + + flags = irqsave(); + usbtrace(resume ? TRACE_EPRESUME : TRACE_EPSTALL, privep->epphy); + + uint32_t addr = LPC43_USBDEV_ENDPTCTRL(privep->epphy); + uint32_t ctrl_xs = LPC43_EPPHYIN(privep->epphy) ? USBDEV_ENDPTCTRL_TXS : USBDEV_ENDPTCTRL_RXS; + uint32_t ctrl_xr = LPC43_EPPHYIN(privep->epphy) ? USBDEV_ENDPTCTRL_TXR : USBDEV_ENDPTCTRL_RXR; + + if (resume) + { + privep->stalled = false; + + /* Clear stall and reset the data toggle */ + + lpc43_chgbits (ctrl_xs | ctrl_xr, ctrl_xr, addr); + } + else + { + privep->stalled = true; + + lpc43_setbits (ctrl_xs, addr); + } + + irqrestore(flags); + return OK; +} + +/******************************************************************************* + * Device operations + *******************************************************************************/ + +/******************************************************************************* + * Name: lpc43_allocep + * + * Description: + * Allocate an endpoint matching the parameters. + * + * Input Parameters: + * eplog - 7-bit logical endpoint number (direction bit ignored). Zero means + * that any endpoint matching the other requirements will suffice. The + * assigned endpoint can be found in the eplog field. + * in - true: IN (device-to-host) endpoint requested + * eptype - Endpoint type. One of {USB_EP_ATTR_XFER_ISOC, USB_EP_ATTR_XFER_BULK, + * USB_EP_ATTR_XFER_INT} + * + *******************************************************************************/ + +static FAR struct usbdev_ep_s *lpc43_allocep(FAR struct usbdev_s *dev, uint8_t eplog, + bool in, uint8_t eptype) +{ + FAR struct lpc43_usbdev_s *priv = (FAR struct lpc43_usbdev_s *)dev; + uint32_t epset = LPC43_EPALLSET & ~LPC43_EPCTRLSET; + irqstate_t flags; + int epndx = 0; + + usbtrace(TRACE_DEVALLOCEP, (uint16_t)eplog); + + /* Ignore any direction bits in the logical address */ + + eplog = USB_EPNO(eplog); + + /* A logical address of 0 means that any endpoint will do */ + + if (eplog > 0) + { + /* Otherwise, we will return the endpoint structure only for the requested + * 'logical' endpoint. All of the other checks will still be performed. + * + * First, verify that the logical endpoint is in the range supported by + * by the hardware. + */ + + if (eplog >= LPC43_NLOGENDPOINTS) + { + usbtrace(TRACE_DEVERROR(LPC43_TRACEERR_BADEPNO), (uint16_t)eplog); + return NULL; + } + + /* Convert the logical address to a physical OUT endpoint address and + * remove all of the candidate endpoints from the bitset except for the + * the IN/OUT pair for this logical address. + */ + + epset &= 3 << (eplog << 1); + } + + /* Get the subset matching the requested direction */ + + if (in) + { + epset &= LPC43_EPINSET; + } + else + { + epset &= LPC43_EPOUTSET; + } + + /* Get the subset matching the requested type */ + + switch (eptype) + { + case USB_EP_ATTR_XFER_INT: /* Interrupt endpoint */ + epset &= LPC43_EPINTRSET; + break; + + case USB_EP_ATTR_XFER_BULK: /* Bulk endpoint */ + epset &= LPC43_EPBULKSET; + break; + + case USB_EP_ATTR_XFER_ISOC: /* Isochronous endpoint */ + epset &= LPC43_EPISOCSET; + break; + + case USB_EP_ATTR_XFER_CONTROL: /* Control endpoint -- not a valid choice */ + default: + usbtrace(TRACE_DEVERROR(LPC43_TRACEERR_BADEPTYPE), (uint16_t)eptype); + return NULL; + } + + /* Is the resulting endpoint supported by the LPC433x? */ + + if (epset) + { + /* Yes.. now see if any of the request endpoints are available */ + + flags = irqsave(); + epset &= priv->epavail; + if (epset) + { + /* Select the lowest bit in the set of matching, available endpoints */ + + for (epndx = 2; epndx < LPC43_NPHYSENDPOINTS; epndx++) + { + uint32_t bit = 1 << epndx; + if ((epset & bit) != 0) + { + /* Mark the IN/OUT endpoint no longer available */ + + priv->epavail &= ~(3 << (bit & ~1)); + irqrestore(flags); + + /* And return the pointer to the standard endpoint structure */ + + return &priv->eplist[epndx].ep; + } + } + /* Shouldn't get here */ + } + irqrestore(flags); + } + + usbtrace(TRACE_DEVERROR(LPC43_TRACEERR_NOEP), (uint16_t)eplog); + return NULL; +} + +/******************************************************************************* + * Name: lpc43_freeep + * + * Description: + * Free the previously allocated endpoint + * + *******************************************************************************/ + +static void lpc43_freeep(FAR struct usbdev_s *dev, FAR struct usbdev_ep_s *ep) +{ + FAR struct lpc43_usbdev_s *priv = (FAR struct lpc43_usbdev_s *)dev; + FAR struct lpc43_ep_s *privep = (FAR struct lpc43_ep_s *)ep; + irqstate_t flags; + + usbtrace(TRACE_DEVFREEEP, (uint16_t)privep->epphy); + + if (priv && privep) + { + /* Mark the endpoint as available */ + + flags = irqsave(); + priv->epavail |= (1 << privep->epphy); + irqrestore(flags); + } +} + +/******************************************************************************* + * Name: lpc43_getframe + * + * Description: + * Returns the current frame number + * + *******************************************************************************/ + +static int lpc43_getframe(struct usbdev_s *dev) +{ +#ifdef CONFIG_LPC43_USBDEV_FRAME_INTERRUPT + FAR struct lpc43_usbdev_s *priv = (FAR struct lpc43_usbdev_s *)dev; + + /* Return last valid value of SOF read by the interrupt handler */ + + usbtrace(TRACE_DEVGETFRAME, (uint16_t)priv->sof); + return priv->sof; +#else + /* Return the last frame number detected by the hardware */ + + usbtrace(TRACE_DEVGETFRAME, 0); + + /* FIXME: this actually returns the micro frame number! */ + return (int)lpc43_getreg(LPC43_USBDEV_FRINDEX_OFFSET); +#endif +} + +/******************************************************************************* + * Name: lpc43_wakeup + * + * Description: + * Tries to wake up the host connected to this device + * + *******************************************************************************/ + +static int lpc43_wakeup(struct usbdev_s *dev) +{ + irqstate_t flags; + + usbtrace(TRACE_DEVWAKEUP, 0); + + flags = irqsave(); + lpc43_setbits(USBDEV_PRTSC1_FPR, LPC43_USBDEV_PORTSC1); + irqrestore(flags); + return OK; +} + +/******************************************************************************* + * Name: lpc43_selfpowered + * + * Description: + * Sets/clears the device selfpowered feature + * + *******************************************************************************/ + +static int lpc43_selfpowered(struct usbdev_s *dev, bool selfpowered) +{ + FAR struct lpc43_usbdev_s *priv = (FAR struct lpc43_usbdev_s *)dev; + + usbtrace(TRACE_DEVSELFPOWERED, (uint16_t)selfpowered); + +#ifdef CONFIG_DEBUG + if (!dev) + { + usbtrace(TRACE_DEVERROR(LPC43_TRACEERR_INVALIDPARMS), 0); + return -ENODEV; + } +#endif + + priv->selfpowered = selfpowered; + return OK; +} + +/******************************************************************************* + * Name: lpc43_pullup + * + * Description: + * Software-controlled connect to/disconnect from USB host + * + *******************************************************************************/ + +static int lpc43_pullup(struct usbdev_s *dev, bool enable) +{ + usbtrace(TRACE_DEVPULLUP, (uint16_t)enable); + + irqstate_t flags = irqsave(); + if (enable) + lpc43_setbits (USBDEV_USBCMD_RS, LPC43_USBDEV_USBCMD); + else + lpc43_clrbits (USBDEV_USBCMD_RS, LPC43_USBDEV_USBCMD); + irqrestore(flags); + return OK; +} + +/******************************************************************************* + * Public Functions + *******************************************************************************/ + +/******************************************************************************* + * Name: up_usbinitialize + * + * Description: + * Initialize USB hardware. + * + * Assumptions: + * - This function is called very early in the initialization sequence + * - PLL and GIO pin initialization is not performed here but should been in + * the low-level boot logic: PLL1 must be configured for operation at 48MHz + * and P0.23 and PO.31 in PINSEL1 must be configured for Vbus and USB connect + * LED. + * + *******************************************************************************/ + +void up_usbinitialize(void) +{ + struct lpc43_usbdev_s *priv = &g_usbdev; + int i; + + usbtrace(TRACE_DEVINIT, 0); + + /* Disable USB interrupts */ + + lpc43_putreg(0, LPC43_USBDEV_USBINTR); + + /* Initialize the device state structure */ + + memset(priv, 0, sizeof(struct lpc43_usbdev_s)); + priv->usbdev.ops = &g_devops; + priv->usbdev.ep0 = &priv->eplist[LPC43_EP0_IN].ep; + priv->epavail = LPC43_EPALLSET; + + /* Initialize the endpoint list */ + + for (i = 0; i < LPC43_NPHYSENDPOINTS; i++) + { + uint32_t bit = 1 << i; + + /* Set endpoint operations, reference to driver structure (not + * really necessary because there is only one controller), and + * the physical endpoint number (which is just the index to the + * endpoint). + */ + priv->eplist[i].ep.ops = &g_epops; + priv->eplist[i].dev = priv; + + /* The index, i, is the physical endpoint address; Map this + * to a logical endpoint address usable by the class driver. + */ + + priv->eplist[i].epphy = i; + if (LPC43_EPPHYIN(i)) + { + priv->eplist[i].ep.eplog = LPC43_EPPHYIN2LOG(i); + } + else + { + priv->eplist[i].ep.eplog = LPC43_EPPHYOUT2LOG(i); + } + + /* The maximum packet size may depend on the type of endpoint */ + + if ((LPC43_EPCTRLSET & bit) != 0) + { + priv->eplist[i].ep.maxpacket = LPC43_EP0MAXPACKET; + } + else if ((LPC43_EPINTRSET & bit) != 0) + { + priv->eplist[i].ep.maxpacket = LPC43_INTRMAXPACKET; + } + else if ((LPC43_EPBULKSET & bit) != 0) + { + priv->eplist[i].ep.maxpacket = LPC43_BULKMAXPACKET; + } + else /* if ((LPC43_EPISOCSET & bit) != 0) */ + { + priv->eplist[i].ep.maxpacket = LPC43_ISOCMAXPACKET; + } + } + + /* Enable USB to AHB clock and to Event router*/ + + lpc43_enableclock (CLKID_USBOTGAHBCLK); + lpc43_enableclock (CLKID_EVENTROUTERPCLK); + + /* Reset USB block */ + + lpc43_softreset (RESETID_USBOTGAHBRST); + + /* Enable USB OTG PLL and wait for lock */ + + lpc43_putreg (0, LPC43_SYSCREG_USB_ATXPLLPDREG); + + uint32_t bank = EVNTRTR_BANK(EVENTRTR_USBATXPLLLOCK); + uint32_t bit = EVNTRTR_BIT(EVENTRTR_USBATXPLLLOCK); + + while (! (lpc43_getreg(LPC43_EVNTRTR_RSR(bank)) & (1 << bit))) + ; + + /* Enable USB AHB clock */ + + lpc43_enableclock (CLKID_USBOTGAHBCLK); + + /* Reset the controller */ + + lpc43_putreg (USBDEV_USBCMD_RST, LPC43_USBDEV_USBCMD); + while (lpc43_getreg (LPC43_USBDEV_USBCMD) & USBDEV_USBCMD_RST) + ; + + /* Attach USB controller interrupt handler */ + + if (irq_attach(LPC43_IRQ_USBOTG, lpc43_usbinterrupt) != 0) + { + usbtrace(TRACE_DEVERROR(LPC43_TRACEERR_IRQREGISTRATION), + (uint16_t)LPC43_IRQ_USBOTG); + goto errout; + } + + + /* Program the controller to be the USB device controller */ + + lpc43_putreg (USBDEV_USBMODE_SDIS | USBDEV_USBMODE_SLOM | USBDEV_USBMODE_CMDEVICE, + LPC43_USBDEV_USBMODE); + + /* Disconnect device */ + + lpc43_pullup(&priv->usbdev, false); + + /* Reset/Re-initialize the USB hardware */ + + lpc43_usbreset(priv); + + return; + +errout: + up_usbuninitialize(); +} + +/******************************************************************************* + * Name: up_usbuninitialize + *******************************************************************************/ + +void up_usbuninitialize(void) +{ + struct lpc43_usbdev_s *priv = &g_usbdev; + irqstate_t flags; + + usbtrace(TRACE_DEVUNINIT, 0); + + if (priv->driver) + { + usbtrace(TRACE_DEVERROR(LPC43_TRACEERR_DRIVERREGISTERED), 0); + usbdev_unregister(priv->driver); + } + + /* Disconnect device */ + + flags = irqsave(); + lpc43_pullup(&priv->usbdev, false); + priv->usbdev.speed = USB_SPEED_UNKNOWN; + + /* Disable and detach IRQs */ + + up_disable_irq(LPC43_IRQ_USBOTG); + irq_detach(LPC43_IRQ_USBOTG); + + /* Reset the controller */ + + lpc43_putreg (USBDEV_USBCMD_RST, LPC43_USBDEV_USBCMD); + while (lpc43_getreg (LPC43_USBDEV_USBCMD) & USBDEV_USBCMD_RST) + ; + + /* Turn off USB power and clocking */ + + lpc43_disableclock (CLKID_USBOTGAHBCLK); + lpc43_disableclock (CLKID_EVENTROUTERPCLK); + + + irqrestore(flags); +} + +/******************************************************************************* + * Name: usbdev_register + * + * Description: + * Register a USB device class driver. The class driver's bind() method will be + * called to bind it to a USB device driver. + * + *******************************************************************************/ + +int usbdev_register(struct usbdevclass_driver_s *driver) +{ + int ret; + + usbtrace(TRACE_DEVREGISTER, 0); + +#ifdef CONFIG_DEBUG + if (!driver || !driver->ops->bind || !driver->ops->unbind || + !driver->ops->disconnect || !driver->ops->setup) + { + usbtrace(TRACE_DEVERROR(LPC43_TRACEERR_INVALIDPARMS), 0); + return -EINVAL; + } + + if (g_usbdev.driver) + { + usbtrace(TRACE_DEVERROR(LPC43_TRACEERR_DRIVER), 0); + return -EBUSY; + } +#endif + + /* First hook up the driver */ + + g_usbdev.driver = driver; + + /* Then bind the class driver */ + + ret = CLASS_BIND(driver, &g_usbdev.usbdev); + if (ret) + { + usbtrace(TRACE_DEVERROR(LPC43_TRACEERR_BINDFAILED), (uint16_t)-ret); + g_usbdev.driver = NULL; + } + else + { + /* Enable USB controller interrupts */ + + up_enable_irq(LPC43_IRQ_USBOTG); + + /* FIXME: nothing seems to call DEV_CONNECT(), but we need to set + * the RS bit to enable the controller. It kind of makes sense + * to do this after the class has bound to us... + * GEN: This bug is really in the class driver. It should make the + * soft connect when it is ready to be enumerated. I have added + * that logic to the class drivers but left this logic here. + */ + + lpc43_pullup(&g_usbdev.usbdev, true); + } + return ret; +} + +/******************************************************************************* + * Name: usbdev_unregister + * + * Description: + * Un-register usbdev class driver.If the USB device is connected to a USB host, + * it will first disconnect(). The driver is also requested to unbind() and clean + * up any device state, before this procedure finally returns. + * + *******************************************************************************/ + +int usbdev_unregister(struct usbdevclass_driver_s *driver) +{ + usbtrace(TRACE_DEVUNREGISTER, 0); + +#ifdef CONFIG_DEBUG + if (driver != g_usbdev.driver) + { + usbtrace(TRACE_DEVERROR(LPC43_TRACEERR_INVALIDPARMS), 0); + return -EINVAL; + } +#endif + + /* Unbind the class driver */ + + CLASS_UNBIND(driver, &g_usbdev.usbdev); + + /* Disable USB controller interrupts */ + + up_disable_irq(LPC43_IRQ_USBOTG); + + /* Unhook the driver */ + + g_usbdev.driver = NULL; + return OK; +} -- cgit v1.2.3