From 1c40ce968a668a8d80535ab6799518da68fe0ac2 Mon Sep 17 00:00:00 2001 From: Lorenz Meier Date: Thu, 23 Jan 2014 08:01:55 +0100 Subject: RC config params set to more useful default values - needs more testing --- src/modules/sensors/sensor_params.c | 63 +++++++++++++++++++++++++++++++++++-- 1 file changed, 61 insertions(+), 2 deletions(-) (limited to 'src/modules/sensors/sensor_params.c') diff --git a/src/modules/sensors/sensor_params.c b/src/modules/sensors/sensor_params.c index bbc84ef93..30659fd3a 100644 --- a/src/modules/sensors/sensor_params.c +++ b/src/modules/sensors/sensor_params.c @@ -381,14 +381,73 @@ PARAM_DEFINE_FLOAT(BAT_V_SCALING, 0.00459340659f); #endif PARAM_DEFINE_FLOAT(BAT_C_SCALING, 0.0124); /* scaling for 3DR power brick */ +/** + * Roll control channel mapping. + * + * The channel index (starting from 1 for channel 1) indicates + * which channel should be used for reading roll inputs from. + * A value of zero indicates the switch is not assigned. + * + * @min 0 + * @max 18 + * @group Radio Calibration + */ PARAM_DEFINE_INT32(RC_MAP_ROLL, 1); + +/** + * Pitch control channel mapping. + * + * The channel index (starting from 1 for channel 1) indicates + * which channel should be used for reading pitch inputs from. + * A value of zero indicates the switch is not assigned. + * + * @min 0 + * @max 18 + * @group Radio Calibration + */ PARAM_DEFINE_INT32(RC_MAP_PITCH, 2); + +/** + * Throttle control channel mapping. + * + * The channel index (starting from 1 for channel 1) indicates + * which channel should be used for reading throttle inputs from. + * A value of zero indicates the switch is not assigned. + * + * @min 0 + * @max 18 + * @group Radio Calibration + */ PARAM_DEFINE_INT32(RC_MAP_THROTTLE, 3); + +/** + * Yaw control channel mapping. + * + * The channel index (starting from 1 for channel 1) indicates + * which channel should be used for reading yaw inputs from. + * A value of zero indicates the switch is not assigned. + * + * @min 0 + * @max 18 + * @group Radio Calibration + */ PARAM_DEFINE_INT32(RC_MAP_YAW, 4); -PARAM_DEFINE_INT32(RC_MAP_MODE_SW, 5); +/** + * Mode switch channel mapping. + * + * This is the main flight mode selector. + * The channel index (starting from 1 for channel 1) indicates + * which channel should be used for deciding about the main mode. + * A value of zero indicates the switch is not assigned. + * + * @min 0 + * @max 18 + * @group Radio Calibration + */ +PARAM_DEFINE_INT32(RC_MAP_MODE_SW, 0); PARAM_DEFINE_INT32(RC_MAP_RETURN_SW, 0); -PARAM_DEFINE_INT32(RC_MAP_ASSIST_SW, 6); +PARAM_DEFINE_INT32(RC_MAP_ASSIST_SW, 0); PARAM_DEFINE_INT32(RC_MAP_MISSIO_SW, 0); //PARAM_DEFINE_INT32(RC_MAP_OFFB_SW, 0); -- cgit v1.2.3