/**************************************************************************** * * Copyright (C) 2012 PX4 Development Team. All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in * the documentation and/or other materials provided with the * distribution. * 3. Neither the name PX4 nor the names of its contributors may be * used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE * POSSIBILITY OF SUCH DAMAGE. * ****************************************************************************/ /** * @file FMU communication for the PX4IO module. */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include "px4io.h" #define FMU_MIN_REPORT_INTERVAL 5000 /* 5ms */ #define FMU_MAX_REPORT_INTERVAL 100000 /* 100ms */ static int fmu_fd; static hx_stream_t stream; static int rx_fd; static struct px4io_report report; static void comms_handle_frame(void *arg, const void *buffer, size_t length); static struct pollfd pollfds[2]; static int pollcount; void comms_init(void) { /* initialise the FMU interface */ fmu_fd = open("/dev/ttyS1", O_RDWR | O_NONBLOCK); if (fmu_fd < 0) lib_lowprintf("COMMS: fmu open failed %d\n", errno); stream = hx_stream_init(fmu_fd, comms_handle_frame, NULL); pollfds[0].fd = fmu_fd; pollfds[0].events = POLLIN; pollcount = 1; /* default state in the report to FMU */ report.i2f_magic = I2F_MAGIC; } static void serial_rx_init(unsigned serial_mode) { if (serial_mode == system_state.serial_rx_mode) return; system_state.serial_rx_mode = serial_mode; if (serial_mode == RX_MODE_PPM_ONLY) { if (rx_fd != -1) { pollcount = 1; close(rx_fd); rx_fd = -1; } return; } /* open the serial port used for DSM and S.bus communication */ rx_fd = open("/dev/ttyS0", O_RDONLY | O_NONBLOCK); pollfds[1].fd = rx_fd; pollfds[1].events = POLLIN; pollcount = 2; struct termios t; tcgetattr(rx_fd, &t); switch (serial_mode) { case RX_MODE_DSM: /* 115200, no parity, one stop bit */ cfsetspeed(&t, 115200); t.c_cflag &= ~(CSTOPB | PARENB); dsm_init(serial_mode); break; case RX_MODE_FUTABA_SBUS: /* 100000, even parity, two stop bits */ cfsetspeed(&t, 100000); t.c_cflag |= (CSTOPB | PARENB); sbus_init(serial_mode); break; default: break; } tcsetattr(rx_fd, TCSANOW, &t); } void comms_check(void) { /* * Check for serial data */ int ret = poll(pollfds, pollcount, 0); if (ret > 0) { /* * Pull bytes from FMU and feed them to the HX engine. * Limit the number of bytes we actually process on any one iteration. */ if (pollfds[0].revents & POLLIN) { char buf[32]; ssize_t count = read(fmu_fd, buf, sizeof(buf)); for (int i = 0; i < count; i++) hx_stream_rx(stream, buf[i]); } /* * Pull bytes from the serial RX port and feed them to the decoder * if we care about serial RX data. */ if ((pollcount > 1) && (pollfds[1].revents & POLLIN)) { switch (system_state.serial_rx_mode) { case RX_MODE_DSM: dsm_input(rx_fd); break; case RX_MODE_FUTABA_SBUS: sbus_input(rx_fd); break; default: break; } } } /* * Decide if it's time to send an update to the FMU. */ static hrt_abstime last_report_time; hrt_abstime now, delta; /* should we send a report to the FMU? */ now = hrt_absolute_time(); delta = now - last_report_time; if ((delta > FMU_MIN_REPORT_INTERVAL) && (system_state.fmu_report_due || (delta > FMU_MAX_REPORT_INTERVAL))) { system_state.fmu_report_due = false; last_report_time = now; /* populate the report */ for (int i = 0; i < system_state.rc_channels; i++) report.rc_channel[i] = system_state.rc_channel_data[i]; report.channel_count = system_state.rc_channels; report.armed = system_state.armed; /* and send it */ hx_stream_send(stream, &report, sizeof(report)); } } int frame_rx; int frame_bad; static void comms_handle_config(const void *buffer, size_t length) { const struct px4io_config *cfg = (struct px4io_config *)buffer; if (length != sizeof(*cfg)) { frame_bad++; return; } frame_rx++; serial_rx_init(cfg->serial_rx_mode); } static void comms_handle_command(const void *buffer, size_t length) { const struct px4io_command *cmd = (struct px4io_command *)buffer; if (length != sizeof(*cmd)) { frame_bad++; return; } frame_rx++; irqstate_t flags = irqsave(); /* fetch new PWM output values */ for (unsigned i = 0; i < PX4IO_OUTPUT_CHANNELS; i++) system_state.fmu_channel_data[i] = cmd->servo_command[i]; /* if the IO is armed and the FMU gets disarmed, the IO must also disarm */ if(system_state.arm_ok && !cmd->arm_ok) { system_state.armed = false; } system_state.arm_ok = cmd->arm_ok; system_state.mixer_use_fmu = true; system_state.fmu_data_received = true; /* handle changes signalled by FMU */ // if (!system_state.arm_ok && system_state.armed) // system_state.armed = false; /* XXX do relay changes here */ for (unsigned i = 0; i < PX4IO_RELAY_CHANNELS; i++) system_state.relays[i] = cmd->relay_state[i]; irqrestore(flags); } static void comms_handle_frame(void *arg, const void *buffer, size_t length) { const uint16_t *type = (const uint16_t *)buffer; /* make sure it's what we are expecting */ if (length > 2) { switch (*type) { case F2I_MAGIC: comms_handle_command(buffer, length); break; case F2I_CONFIG_MAGIC: comms_handle_config(buffer, length); break; default: break; } } frame_bad++; }